Sylvania Portable DVD Player SDVD7045 User Manual

7TFT LCD PORTABLE DVD PLAYER  
MODEL:SDVD7045  
USER MANUAL  
Please read and keep these instructions  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety information  
Troubleshooting (Continued)  
CAUTION:  
Symptom [DVD]  
Remedy  
DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/  
VIDEO ,CD/CD PLAYER USES A VISIBLE LASER BEAM WHICH COULD CAUSE  
HAZARDOUS RADIATION EXPO SURE IF DIRECTED. BE SURE TO OPERATE THE  
DVD/VIDEO CD/CD PLAYER CORRECTLY AS INSTRUCTED.  
Play does not start even  
when title is selected.  
Confirm the region code setting is right.  
If the audio soundtrack and/or subtitle language does not  
exist on the disc, the language selected at the initial settings  
will not be seen/heard.  
Audio soundtrack and/or subtitle  
language is not the initial settings.  
WHEN THIS DVD/VIDEO CD/CD PLAYER IS PLUGGED TO THE WALL OUTLET, DO  
NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND  
OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS PLAYER.  
Subtitles appear only with discs which contain them.  
Subtitles are cleared from the TV monitor, Perform the  
steps display the subtitles.  
No subtitles.  
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES  
OTHERTHAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS  
RADIATION EXPOSURE.  
Alternative audio soundtrack  
(or subtitle) languages fail to be  
selected.  
An alternative language is not selected with discs which  
do not contain more than one language.  
In the case of some discs, the alternative language can  
not be selected by operating the LANGUAGE or  
SUBTITLE button. Try selecting it from the DVD menu if  
one is available.  
DO NOT OPEN COVERS AND REPAIR YOURSELF. REFER SERVICING TO QUALIFIED  
PERSONNEL  
Angle cannot be changed.  
This function is dependent on software availability. Even if a  
disc has a number of angles recorded, these angles may be  
recorded for specific scenes only.  
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION!  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING  
INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.  
The password for rating level  
has been forgotten.  
Please contact your local sales dealer.  
WARNING:  
Symptom [Video CD]  
Remedy  
-TO PREVENT FIRE OR SHOCK HAZARD. DO NOT USE THIS PLUG WITH AN  
EXTENSION CORD. RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN  
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.  
This function works only for Video CDs with playback  
control.  
No menu play.  
-TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN  
OR MOISTURE.  
Region code setting  
LASER RADIATION WHEN OPEN, DO NOT STARE INTO BEAM.  
CAUTION -  
VENTILATION WARNING THE NORMAL VENTILATION OF THE PRODUCT SHALL  
NOT BE IMPEDED FOR INTENDED USE.  
-
Region coding: All DVD discs are coded by the sales territory. Please note the player  
is set to region 1 coding by the factory which cannot be changed. This is in compliance  
with the DVD patent requirements.  
C A U T I O N  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
The region number for this DVD player is  
1
The exclamation  
point within the  
triangle is a warning  
sign alerting you of  
important instructions  
accompanying the  
product.  
CAUTION: TO REDUCE THE RISK  
OF ELECTRIC SHOCK. DO NOT  
REMOVE COVER (OR BACK).  
NO USER SERVICEABLE PARTS  
INSIDE. REFER SERVICING TO  
QUALIFIED SERVICE  
The lightning flash and  
arrow head within the  
triangle is a warning  
sign alerting you of  
dangerous voltage”  
inside the product.  
PERSONNEL.  
Always follow basic safety precautions when using electrical products, especially  
when children are present.  
WARNING: To avoid the risk of electrical shock, make sure the product is unplugged from  
the electrical outlet before relocating, servicing, or cleaning it.  
1
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Read all instructions before using  
Do not use this product near water.  
Do not ceiling- or wall-mount the product.  
Install the product in accordance with the operating instructions.  
Do not set the product near heat sources, such as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
Before requesting service for this player, check the chart below for a possible cause of the  
problem you are experiencing. Some simple checks or an adjustment on your part may  
eliminatethe problem and restore proper operation.  
Protect the power cord from being walked on or pinched, particularly at plugs, convenience  
receptacles, and the point where they exit the product.  
Do not use attachments not recommended or sold by the product manufacturer as a risk of fire,  
electrical shock, or serious personal injury may result.  
Unplug the product during lightning storms or when unused for long periods of time.  
Do not expose the product to dripping or splashing water. Do not place objects filled with liquid  
(e.g., vases) on the product.  
Do not place in or expose the product to direct sunlight, extreme heat, humid or dusty locations.  
Never operate this product if it has a damaged power cord or plug, is not working properly, has  
been dropped, damaged, or exposed to moisture, water, or other liquids. Do not attempt to  
examine or repair this product yourself; take the product to a service centre for inspection and  
repair.  
Symptom(Common)  
No power.  
Remedy  
Insert the AC adaptor securely into the power outlet.  
Condensation has formed: wait about 1 to 2 hours  
to allow the player to dry out.  
This player cannot play a disc other than DVD, VCD and  
CD.  
The disc may be dirty and may require cleaning.  
Ensure that the disc is installed with the label side up.  
Play fails to start even when  
PLAY is pressed.  
Play starts but then stops  
immediately.  
Keep magnetic objects such as speakers,at a distance from the player.  
No picture.  
Ensure that the equipment is connected properly.  
Ensure that the equipment is connected properly.  
Ensure that the input setting for the TV and stereo  
system are correct.  
Adjust the master volume to a suitable volume by rotating  
the volume knob at the side of the player.  
LASER SAFETY  
No sound.  
Distorted sound.  
This set employs an optical laser beam system in the CD mechanism designed  
with built-in safeguards. Do not attempt to disassemble. Exposure to this  
invisible laser light beam may be harmful to the human eye. This is a Class-1  
laser product. Use of controls, adjustments or procedures other than those  
specified herein may result in hazardous laser light beam exposure. This  
compact disc player should not be adjusted or repaired by anyone except  
qualified service personnel. The laser mechanism in the set corresponds to the  
stylus (needle) of a record player. Although this product uses a laser pick-up  
lens, it is completely safe when operated according to directions.  
The picture will be somewhat distorted at times: this is  
normal.  
Picture is distorted during rapid  
advance or rapid reverse.  
Some discs may have sections which prohibit rapid  
advance (or rapid reverse.)  
No rapid advance or rapid  
reverse play  
Check the batteries are installed with the correct polarities.  
The batteries are exhausted: replace them with new ones.  
Point remote control at the remote control sensor and  
operate.  
Operate the remote control unit at a distance of not  
more than 6 m from the remote control sensor.  
Remove the obstacles between the remote control and  
remote control sensor.  
No operations can be performed  
with the remote control unit.  
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized  
modifications. Such modifications could void the user's authority to operate the equipment.  
1) Operate turning controls and switches as instructed in the manual.  
2) Before turning on the power for the first time,make sure that the power cord is properly  
installed.  
3) Store your discs in a cool area to avoid damage from heat.  
Disconnect the power adaptor and then reconnect it. (The  
player may not be operating properly due to lightning, static  
electricity or some other external factor.)  
No key operation (by the main  
unit and/or the remote control  
unit) is effective.  
Battery Handling and Usage  
NOTE: This style player contains rechargeable Li-ion battery . There is a CR 2025  
battery for remote control.  
1). Never throw batteries into a fire. Do not expose batteries to fire or other heat sources.  
2). Battery Disposal: Spent or discharged batteries must be properly disposed of and  
recycled in compliance with all applicable laws. For detailed information, contact your  
local solid waste authority.  
To be continued  
2
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
DISC handling and maintenance  
Handling precautions  
Hold the disc by the edges so the surface will not be soiled with fingerprints. Fingerprints,  
dirt and scratches can cause skipping and distortion.  
Power requirements:  
AC 100 -240V~ 50/60Hz  
DC 12V---800mA  
P
9.6W  
ower consumption: <  
Signal system:  
Do not write on the label side with a ball-point pen or other writing utensils.  
NTSC/PAL  
480X3(RGB) X 234  
Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids.  
Be careful not to drop or bend the disc.  
Do not install more than 1 disc on the disc compartment.  
Do not try to close the disc cover when the disc is not installed properly.  
Be sure to store the disc in its exclusive case when not in use.  
Resolution:  
Dots Distance:0.107 (W) X 0.370 (H) mm  
Visible Range: 154.08 (W) X 86.58 (H) mm  
Discs played:  
(1) DVD-VIDEO disc  
If the surface is soiled  
Wipe gently with a soft, damp (water only) cloth.  
12 cm single-sided,single-layer  
12 cm single-sided,dual-layer  
12 cm double-sided,single-layer  
8 cm single-sided,single-layer  
When wiping discs, always move the cloth from the centre hole toward the outside, which  
will not cause distortion. (If you wipe the discs using a circular motion, circular scratches are  
likely to occur, which will cause distortion.)  
8 cm single-sided,dual-layer  
8 cm double-sided,single-layer  
(2) Compact disc(VIDEO CD)  
12 cm disc  
If the disc is brought from a cold to a warm environment moisture may  
form on the disc  
Wipe this moisture off with a soft, dry, lint-free cloth before using the disc.  
8 cm disc  
Improper disc storage  
You can damage discs if you store them in the following places:  
Areas exposed to direct sunlight  
Humid or dusty areas  
Areas directly exposed to a heat outlet or heating appliance  
Video output level: 1 V  
p-p  
: 1.2V  
Audio output level  
Earphone output level:  
(1KHz , 0dB, 25mW )  
Pickup: Wave length: 655nm  
Laser power: CLASS-1  
Maintenance  
Be sure to disconnect the AC adaptor before maintaining the player.  
Wipe the player with a dry, soft cloth.  
If the surfaces are extremely dirty ,wipe clean with a cloth which has been dipped  
in a weak soap-and-water solution and wrung out thoroughly, and then wipe again  
with a dry cloth.  
Specifications are subject to change without notice.  
Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. And do not use  
compressed air to remove dust  
Accessories  
T
F
T
M
O
D
E
1
4
2
3
N
/P  
5
8
6
9
O
S
D
7
7  
T
FT  
L
CD  
P
O
RTABL  
E
DV  
D
P
L
AY  
E
R
G
O
T
O
0
1
0
+
S
P
T
O
P
P
L
A
Y
/P  
A
U
S
E
M
ODEL:SDVD7 04  
5
F
R
F
F
R
E
V
N
E
X
T
Battery for  
remote control  
..................1  
Instruction  
manual  
................1  
Z
O
O
M
S
L
O
W
A
-
B
R
E
P
E
A
T
+
P
R
O
G
R
A
M
A
N
G
L
E
S
E
T
U
P
Remote control  
......................1  
S
T
E
P
E
N
T
E
R
Lithium Cell  
CR202 5  
3V DZ  
L
/
R
T
I
L
E
M
V
E
N
U
S
U
B
T
IT  
L
E
L
A
N
G
U
A
G
E
V
O
L
O
L
M
U
T
E
U
S
ER MANUAL  
P
le  
a
s
e
re  
a
d
a
n
d
k
e
e
p
t
h
e
s
e
i
n
s
t
r
u
c
t
i
o
n
s
1
AC adaptor  
................1  
Cigarette lighter  
.......................1  
Earphone  
................1  
Picture in instruction manual just supply the reference, all accessories regard practicality as norm.  
3
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Definition of terms  
Table of contents  
DVD  
Getting Started:  
This refers to a high-density optical disc on which high-quality pictures and sound have been  
obtained by means of digital signals. Incorporation a new video compression technology  
(MPEG II) and high-density recording technology, DVD enables aesthetically pleasing  
full-motion video to be recorded over long periods of time (for instance, a whole movie can  
be recorded). DVD has a structure consisting of two 0.6 mm thin discs which are adhered  
to each other. Since the thinner the disc, the higher the density at which the information can  
be recorded, a DVD disc has a greater capacity than a single 1.2 mm thick disc. Since the  
two thin discs are adhered to each other, there is the potential to achieve double-sided play  
sometime in the future for even longer duration play.  
Safety information… … … … … … … … … … … … … … … … … … … … … … … … … … … 1-2  
Disc handing and maintenance… … … … … … … … … … … … … … … … … … … … … … -3  
Accessories … … … … … … … … … … … … … … … … … … … … … … … … … … … …  
Features … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … 5  
Control reference guide… … … … … … … … … … … … … … … … … … … … … … … … … 6-7  
Basic connection … … … … … … … … … … … … … … … … … … … … … … … … … … 8-10  
Remote control preparation… … … … … … … … … … … … … … … … … … … … … … … … 11  
3
Basic Operation:  
Basic play...... ...............................................................................................12  
Stopping play… ……… ……… …………… … …… ……… …… ……… ……… …………… … 13  
Skipping ahead or back… … … … … … … … … … … … … … … … … … … … … … … … … …13  
Fast forward or backward …………… … … … … … … … … … … … … … … … … … …13  
Video CD  
This contains recordings of pictures and sound whose quality is on a par with that of video  
tape. This player also supports Video CDs with playback control (version 2.0).  
Pause or play  
… … … … … … … … … … … … …  
… … … … … … … 13  
… … … … …  
MP3  
Slow-motion play [DVD/VCD]… … … … … … … … … … … … … … … … … … … … … … … 14  
MP3 playback …… … … … … … … … … … … … … … … … … … … … … … … … … … … … … 14  
MP4 playback … … … … … … … … … … … … … … … … … … … … … … … … … … … … … 15  
JPEG CD ………… ……… ………… … … … … … … … … … … … … … … … … … … 16-18  
Enjoying Video CD with playback control… … … … … … … … … … … … … … … … … … 18  
On screen display information … … … … … … … … … … … … … … … … … … … … … … 19  
These contain recordings of music which are compressed, allowing a significantly larger  
amount of music to be stored on a CD.  
Angle  
Recorded onto some DVD discs are scenes which have been simultaneously shot from  
a number of different angles (the same scene is shot from the front, from the left side, from  
the right side, etc.). With such discs, the ANGLE button can be used to view the scene from  
different angles.  
Advanced Operation:  
Program play… … … … … … … … … … … … … … … … … … … … … … … … … … … … … … 19  
Repeat play … … … … … … … … … … …… … … … …… … … … …… … … … …… … … 20  
Subtitles  
This is the appearance of the dialogue at the bottom of the screen which are prerecorded on  
…… … … … …… … … … … … … …… … … … …  
Repeat viewing …  
…… … … … …… … … …… 20  
A-B repeat play… …… … … … … … … … … … …… … … … …… … … … … …… … … … … 20  
TFT MO DE............................ ................ ................ ................ ................ ................ .........20  
some DVD discs.  
Title number  
GO TO… … … … … … … … … … … …… … … … …… … …… … … … … … … … … … … … … 20  
Changing subtitle language(DVD only)… … … … … … … … … … … … … … … … … … … 21  
ZOO M play..... ......................................................... ........................ ..............21  
Changing audio soundtracklanguage(DVD/VCD disc)… … … … … … … … … … … … … 21  
Viewing from different angle(DVD only)…… ……… …… …… … ……… …… ……… ……22  
These numbers are recorded on DVD discs. When a disc contains two or more movies, these  
movies are numbered as title 1, title 2, etc.  
Chapter number  
These numbers are recorded on DVD discs. A title is sub- divided into many sections, each  
of which is numbered, and specific parts of video presentations can be searched quickly  
using these numbers.  
Initial Settings:  
General setup…… … …… …… ……… ……… …… ……… ……… …… ……… ………22-23  
Audio setup… … … … … … … … … … … … … … … … … … … …… … … … … … … … … … …23  
Password set up … … … … ……… …… ……… ……… …… … … … ……… …… ……… 23-24  
Time number  
This indicates the play time which has elapsed from the start of a disc or a title. It can be  
used to find a specific scene quickly.(It may not work with some discs.)  
For Reference:  
Playback control (PBC)  
Definition of terms… … … … … … … … … … … … … … … … … … … … … … … … … … … … 25  
Specifications… … … … … … … … … … … … … … … … … … … … … … … … … … … … … … 26  
Troubleshooting… … …… …… … ……… … … ……… ……… …… ……… …… ……… 27-28  
Region code setting … … … … … … … … … … … … … … … … … … … … … … … … … … … 28  
This is recorded on a Video CD (version 2.0). The scenes or information to be viewed  
(or listened to) can be selected interactively with the TV monitor by looking at the menu  
shown on the TV monitor.  
Track number  
These numbers are assigned to the tracks which are re- corded on Video CDs and CDs. They  
enable specific tracks to be located quickly.  
4
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.PASSWORD SET UP  
Features  
7" TFT DISPLAY  
--PASSWORD SETUP PAGE--  
This player has a built- in 7" TFT display window, to provide clear vision, and low radiation.  
PASSWORD  
PARENTAL  
Built-in rechargeable Lithium battery  
SLIDE SHOW IN 17 MODES  
MULTI TV SYSTEM SUPPORT  
The player can play discs with signal system of PAL and NTSC.  
GO TO PASSWORD SETUP PAGE  
GRAPHICAL USER INTERFACE SCREEN  
Simply by pressing the DISPLAY button on the remote control, information on the player and  
disc can be displayed on the screen for easy identification, The player's operations and  
settings can be performed by operating the remote control while monitoring screen.  
3.1 PASSWORD - It is used to change the password, and the procedure of changing password  
is described as followings:  
Enter old password in the OLD PASSWORD row  
Enter new password in the NEW PASSWORD row  
MULTI-AUDIO FUNCTION  
The audio soundtrack can be heard in up to 8 languages. (The number of audio sound  
languages depends on the software.)  
Enter the new password again in the CONFIRM PWD row  
Press OK button on the screen to return to the Password Setup Page, then the  
Password has been changed.  
NOTE: The original password is 136900, you can change it, but you should write it  
down and keep it safe. If you forget the password, please use the original password:136900.  
MULTI-SUBTITLES FUNCTION  
Subtitles may be displayed in one of a maximum of 32 languages depending on the software.  
MULTI-ANGLE FUNCTION  
This function allows you to choose the viewing angle of scenes which were shot from a  
number of different angles. (Limited to DVD recorded with multiple camera angles.)  
3.2 PARENTAL - This setting allows certain people to view certain discs, which may be  
especially useful to forbid children from viewing some unbefitting discs. When you  
have entered the Parental Control, the screen will display:  
PARENTAL LOCK FUNCTION  
This prevents play unsuitable for children.  
DISC FORMATS SUPPORTED BY PLAYER  
The player can play back discs bearing any of the following marks:  
--PASSWORD SETUP PAGE--  
1 KID SAFE  
2 G  
3PG  
PASSWORD  
PARENTAL  
4 PG 13  
5 PGR  
6 R  
7 NC 17  
8 ADULT  
SET PARENTAL CONTROL  
Scroll down the alternatives by moving Up or Down Navigation button, press ENTER button  
and enter the password which you has set before, then you have set a Parental Control .  
There are eight different settings fromKid Safeto Adultwhich you can choose.  
1
24  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2 TV DISPLAY - it is for selecting TV output mode.  
Options: Normal /PS: Pan & scan mode  
Normal/ LB: Letter box mode  
Control reference guide  
Main unit  
Wide : 16:9 wide screen mode  
1.3 ANGLE MARK - it is used to select whether or not the multi- angle icon is display on screen  
when a Multi-angle DVD disc is playing.  
SIDE VIEW  
Options: On: Icon will be displayed  
Off: Icon will be turned off  
17  
18  
19  
1
1.4 OSD LANG - It is used to choose the desired language for different user. In this player, you  
can choose ENGLISH/ FRENCH /SPANISH languages.  
20  
21  
22  
1.5 CAPTIONS - It is used to switch the caption ON/OFF when playing DVD disc.  
8
2
1.6 SCREEN SAVER - when the player is not in use for 5 minutes, a running DVD logo will move  
across the screen to protect the TV CRT.  
Options: On: Screen saver is enabled  
P
LA  
Y
/P  
A
US  
E
LCD ON/  
O
FF  
Off: Screen saver is disabled  
3
9
ST  
O
P
SET UP  
10  
4
5
6
1.7 DEFAULT - It is used to reset to factory settings.  
2. AUDIO SETUP  
V
OL  
+
M
E
NU  
11  
V
O
L
-
PR  
EV  
13  
12  
14  
FR  
FF  
15  
OP  
E
N
7
16  
NEXT  
--AUDIO SETUP PAGE--  
1.TFT Display window- Displays all information about DVD work scene.  
2..Built-in Speaker.  
3. PLAY/PAUSE button - Press this button to start or pause playing the disc.  
4.STOP button -Press this button to stop playing.  
SPEAKER SETUP  
EQUALIZER  
5.VOLUME + button- Press this button to turn up the volume.  
6. VOLUME - button- Press this button to turn down the volume.  
7. OPEN button- Press this button to open the disc cover.  
8. Remote control sensor.  
9. LCD ON/OFF button-Press this button to turn on/off the display screen.  
10.SETUP button -Press this button to enter initial settings menu.  
GO TO AUDIO SETUP PAGE  
11.MENU button - Press this button to return to the root menu(DVD) or to turn on/off the PBC (VCD).  
12.OK button - Press this button to confirm a selection.  
2.1 SPEAKER SETUP - it is used to set the speaker Output levels  
Options: LT/RT-Left/Right mix mode  
13.UP/PREV button-Press UP button to up, and if you keep pressing it for more than 2 seconds, the  
player will skip to the previous chapter or title(for DVD)or track (for CD).  
14.LEFT/FR button-Press LEFT button to left, and if you keep pressing it for more than 2 seconds, the  
player will play the disc backward at speed:x2,x4,x8,x16x32.  
15.RIGHT/FF button- Press RIGHT button to right, and if you keep pressing it for more than 2 seconds,  
the player will play the disc forward at speed:x2,x4,x8,x16,x32.  
16.DOWN/NEXT button-Press DOWN button to down, and if you keep pressing it for more than 2  
seconds, the player will skip to the next chapter or title(DVD) or track (for CD).  
17.Power Switch - Switch this knob to turn on/off the player.  
18.DC In Jack - Power input jack.  
19.Charge indicator.  
20.POWER indicator.  
21.Phone - Connect headphone to this jack for share listening.  
STEREO - Select this option if you don't Have a 2.1 channel amplifier.  
V SURR- It is used to set dummy surrounding audio effectiveness.  
2.2 EQUALIZER SETUP - It is used to compensate for frequency distortion to improve its  
frequency response in audio systems(not applicable).  
Options: EQ TYPE-It is for selecting the Equalizer Type, in this unit, you can choose  
Mono, Rock, Pop, Live, Dance, Techno, Classic or Soft.  
BASS BOOST- It is used to turn the Bass Boost ON or OFF.  
SUPER BASS- It is used to turn the Super Bass ON or OFF.  
TREBLE BOOST- It is used to turn the Treble Boost ON or OFF.  
22.AV Out Jack - Connect to TV or other external AV equipment to use the player as a signal source.  
6
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing from different  
angle (DVD only)  
Some DVDs may contain scenes which have  
been shot simultaneously from a number of  
different angles. For these discs, the same  
scene can be viewed from each of these  
different angles using the ANGLE button.  
Press ANGLE during play, number of angle  
being played will be displayed in the screen,  
press the button to change to different angles.  
Control reference guide  
Remote control  
TFT MOD E  
1 TFT MODE button- Press this button to select  
BRIGHTNESS, CONTRAST, SHARPNESS,  
SATURATION, HUE or 16:9/4:3 screen mode  
and then press left or right button to adjust as you like.  
2 NUMERIC buttons- Press these buttons to input  
numeric information, such as track number, chapter  
number and so on.  
1
14  
15  
3
6
9
1
4
7
0
2
5
8
N/P  
OSD  
2
16  
17  
3 FR button- Press this button to play the disc  
GOTO  
backward at speeds:x2,x4,x8,x16,x32.  
TFT MODE  
+
10  
4 FF button- Press this button to play the disc  
forward at speeds: x2,x4,x8,x16,x32.  
5 ZOOM button -Press this button to enlarge picture  
size, max.to X 4 or to shrink picture size, min. to X1/4.  
6 SLOW button -Press this button to play the disc at  
speeds:1/2,1/4,1/8,1/16.  
7 PROGRAM button -Press this button to setup the  
memory order of chapter or title (for DVD) or tracks  
(for VCD/CD).  
8 ANGLE button -Press this button to display the  
angle number and change to different angles.  
9 STEP button- Press this button to play the  
file forward step by step.  
10 L/R button-To change audio output mode: Left  
Mono, Right Mono, Mix-mono and Stereo soundtrack.  
11 TITLE button -Press this button to return to  
title menu (for DVD).  
12 SUBTITLE button-Press this button to display  
and change subtitle language(For DVD only).  
STOP PLAY/PAUSE  
18  
19  
20  
21  
22  
23  
24  
25  
3
4
Initial Settings  
3
6
9
1
4
7
0
2
5
8
FR  
FF  
PREV  
A-B  
NEXT  
REPEAT  
SETUP  
N/P  
OSD  
NUMERIC  
BUTTONS  
5
6
7
8
9
ZOOM  
SLOW  
Once the initial programming is entered it is  
retained in memory until changed, the player can  
always be operated under the same conditions.  
The settings will be retained in the memory  
until the settings are changed even after setting  
the player to the standby mode.  
GOTO  
PROGRAM ANGLE  
STEP  
+
10  
PLAY/PAUSE  
STOP PLAY/PAUSE  
ENTER  
26  
10  
FR  
FF  
PREV  
A-B  
NEXT  
REPEAT  
SETUP  
TITLE  
MENU  
VOL  
L/R  
11  
12  
13  
27  
ZOOM  
SLOW  
Common procedure for initial settings  
ANGLE  
SUBTITLE LANGUAGE  
MUTE  
VOL  
SETUP  
ENTER  
NAVIGATION  
BUTTONS  
28  
29  
PROGRAM ANGLE  
STEP  
1.Press SETUP button.  
ENTER  
2. Use the navigation buttons to select preferred  
item, and press ENTER button, each screen  
for setting the value is displayed. Then move  
the navigation button to set the item and press  
ENTER button to confirm the settings.  
TITLE  
MENU  
VOL  
L/R  
SUBTITLE LANGUAGE  
MUTE  
VOL  
13 LANGUAGE BUTTON- To select the soundtrack language(DVD).  
14 N/P button - Press this button to select NTSC or PAL system (For DVD only).  
15 OSD button -Press OSD button continuously during playback, the screen will display the  
playing information, such as elapsed time, remaining time and so on.  
16 GO TO button- Press this button to set the player to play disc starting at a certain point.  
17 PLAY/PAUSE button - Press this button to start or pause playing the disc.  
18 STOP button -Press this button to halt playing.  
3.Press SETUP button to close setup menu in  
any mode.  
4.Use left navigation button to switch to another  
main setup items  
19 NEXT button -Press this button to play the next chapter(for DVD) or track(for VCD/CD).  
20 PREV button -Press this button to play the previous chapter(for DVD) or track(for VCD/CD).  
21 REPEAT button -Press this button to repeat playing one chapter or one title (forDVD) or  
repeat playing the current track or the whole tracks (for VCD/CD).  
1.GENERAL SET UP  
22 A-B button -Press this button to repeat playing sections between two specific points (A-B).  
23 SETUP button -Press this button to enter initial settings menu.  
24 ENTER button--Press this button to confirm what you have selected.  
25 navigation buttons -Press this button to move up,down,left or right.  
26 MENU button -Press this button to return to the root menu(for DVD) or to turn on/off the  
PBC (for VCD).  
27 VOLUME + button- Press this button to turn up the volume.  
28 VOLUME - button- Press this button to turn down the volume.  
29 MUTE button- Press this button to mute the sound.  
--GENERAL SETUP PAGE--  
TV TYPE  
TV DISPLAY  
NTSC  
WIDE  
1.1 TV TYPE - it is for selecting the TV  
system according to the colour system of  
the TV.  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCREEN SAVER  
DEFAULT  
ON  
ENG  
OFF  
ON  
Options :PAL  
NTSC  
GO TO GENERAL SETUP PAGE  
7
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing subtitle  
language (DVD only)  
Basic connection  
It is possible to change the subtitle language to  
a different language from the one selected at  
the initial settings.( This operation works only  
with discs on which multiple subtitle  
languages are recorded)  
Ensure all the cables are disconnected from the main unit before connecting to AC power  
source by AC power adaptor.  
Read through the instructions before connecting other equipment.  
Do not charge up the battery while the DVD player is working with the battery.  
1.Press SUBTITLE button during play, the  
screen will display the current language.  
2. Press SUBTITLE button again to change  
language or turn off.  
TFT MODE  
Connecting to AC power source  
1
4
7
0
2
5
8
3
6
9
N/P  
OSD  
NOTE: When no subtitles are recorded,  
press this button will not work.  
AV OUT  
PHONE  
POWER  
OFF ON  
IN PUT  
9
-1 2V-  
-
-
GOTO  
CHANGING SUBTITLE LANGUAGE  
+
10  
STOP PLAY/PAUSE  
S UBT ITL E 01 /03 CHI NES E  
SUBTITL E 0 1/03 EN GLIS H  
FR  
FF  
PREV  
A-B  
NEXT  
REPEAT  
SETUP  
To power outlet  
Main unit  
ZOOM  
ZOOM  
SLOW  
AC adaptor  
PROGRAM ANGLE  
STEP  
ENTER  
NOTE:  
NAVIGATION  
BUTTONS  
ZOOM PLAY  
Before connecting to AC power, push the  
ENTER  
L/R  
POWER ON/OFF switch to OFF.  
L/R  
TITLE  
MENU  
VOL  
This function allows you to enjoy a motion  
picture.  
Press ZOOM button when playing, the screen  
shows:  
SUBTITLE  
LANGUAGE  
SUBTITLE LANGUAGE  
MUTE  
VOL  
Rechargeable Battery Use  
2X  
3X  
4X  
The player built-in a chargeable Lithium battery.  
1.Charge the battery  
-Connect the adaptor to the DC 12V IN JACK ,then set the unit in the POWER ON  
mode for fully charged.(FAST RECHARGE)  
1/ 4  
1/3  
1/ 2  
-It needs more time for fully charged if switch the POWER on .(SLOW RECHARGE)  
Press NAVIGATION button to scroll across the  
enlarged picture.  
And the indicator is red during charging; it gets green when charging completed.  
2.Time to recharge the battery  
Recharge and playback time depends on battery pack capacity and the temperature condition.  
Generally speaking, The battery needs to be charged about 3 hours in FAST CHARGE mode  
And about 12 hours in SLOW CHARGE mode.  
Changing audio soundtrack language(DVD/VCD/CD disc)  
It is possible to change the audio soundtrack language to a different language from the one  
selected at the initial settings (This operation works only with discs on which multiple audio  
soundtrack languages are recorded).  
Press LANGUAGE button while playing DVD disc the screen will display the number of curren  
soundtrack languages,pressing the button again will change the language.  
3.Using and Maintaining Rechargeable Battery  
-.The normal working condition temperature is: 0 ~45 ;  
-.Always unplug AC/DC power supply for the unit whenever not playing.  
NOTE: A new battery which has not been used or one which has not been used for more  
than a month, may appear to not recharged enough , this is due to the characteristic of this  
battery and is not a malfunction. In this case, recharge it two or three times before the first  
use and it needs more than 6 hours to recharge battery.  
Noises may be generated during recharging. In this case, use a more distant power socket.  
Do not recharge or discharge battery near a heating element such as a heater or direct sunlight.  
Pressing L/R button while playing VCD/CD disc will change audio output mode: Mono Left,  
Mono Right, Mix-mono and Stereo soundtrack.  
NOTE: When no soundtrack languages are recorded, pressing this button will not  
work.When the power is turned on or the disc is removed, the language heard is the  
one selected at the initial settings.  
21  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat play  
Basic connection  
Press REPEAT button during play, it will  
repeat play one chapter or one title (for DVD  
disc), or repeat play track (for VCD/CD).  
It is recommended to connect a multi-system TV.  
Ensure that this player and other equipment to be connected are set to the OFF mode and  
disconnect the AC adaptor before commencing connection.  
TFT MODE  
Do not block ventilation holes of equipment and arrange them so that air can circulate freely.  
Read through the instructions before connecting other equipment.  
Ensure that you observe the color coding when connecting audio and video cables.  
DVD DISC  
CHAPTER  
1
4
7
0
2
5
8
3
6
9
N/P  
OSD  
Repeat chapter  
Note:  
During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc.  
If this is the case, adjust the volume to the desired level.  
If the DVD/VCD/CD player is connected to the TV through a video cassette recorder,  
the picture may not be played back normally with some DVDs. If this is the case,  
do not connect the player via the VCR.  
GO TO  
TITLE  
GOTO  
+
10  
Repeat title  
STOP PLAY/PAUSE  
FR  
FF  
PREV  
A-B  
NEXT  
REPEAT  
SETUP  
A-B  
ALL  
REPEAT  
ZOOM  
SLOW  
Repeat all  
PROGRAM ANGLE  
STEP  
ENTER  
ENTER  
VCD/CD DISC (In the PBC OFF mode)  
Connecting to a TV set  
TRACK  
L/R  
TITLE  
MENU  
VOL  
Repeat track  
SUBTITLE LANGUAGE VOL  
MUTE  
ALL  
Repeat disc  
TV set  
A-B repeat play  
Repeating sections between two specific  
points(A-B repeat)  
1. Press A-B REPEAT button during play at the point where repeat play is to be started(A).  
2. Press A-B REPEAT button at the point where repeat play is to be ended(B). Repeat play of  
the selection between points A and B starts.  
To video input/output connector (yellow)  
To audio input/output connectors (red, white)  
3. Press A-B REPEAT button once again to return to normal play.  
Video/audio cable  
TFT MODE  
Press TFT MODE button, the bottom at right of  
screen will display as the picture at right:  
CONTRAST IIIIIIIIII........ 00  
POWER  
OFF ON  
AV OUT  
PHONE  
Press this button continuously to select  
IN PUT  
9
-1  
2
V--  
-
BRIGHTNESS, CONTRAST, SHARPNESS,SATURATION, HUE or screen mode(16:9/4:3).  
Then press the LEFT or RIGHT navigation button to adjust the level of the selected item.  
NOTE: The level of BRIGHTNESS, CONTRAST, SHARPNESS,SATURATION and HUE can be  
adjusted from -20 to +20. And the SCREEN MODE can be switched between 16:9 and 4:3.  
Press TFT MODE button again to exit the TFT MODE Menu Page.  
GO TO  
Press GO TO button, the screen will display a menu, then you can move Up or Down Navigation  
button and enter directly a time, chapter or track, the disc will play from the selected point. Press  
GO TO button again to exit the menu.  
9
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On screen display  
information  
Basic connection  
Press OSD button to display playing information.  
Connecting to audio equipment  
DVD disc  
TITLE ELAPSED  
TITLE REMAIN  
T:02/03 C: 07/2 8  
0:1 9:20  
T: 02/03 C: 07/28 1:17: 00  
Audio equipment  
CHAPTER ELAPSED  
T: 02/03 C: 07/28 0:01:53  
CHAPTERREM AIN  
T: 02/03 C: 07/2 8  
0:0 1:34  
TFT MODE  
1
4
7
0
2
5
8
3
6
9
DISPLAY OFF  
T
C
= TITLE NO.  
= CHAPTER Nu mber  
N/P  
OSD  
input/  
To audio  
output connector (red, white)  
NUMERIC  
BUTTONS  
OSD  
VCD disc  
GOTO  
SINGL EELAPSED  
TRACK 02/03 0:19:2 0  
Video/audio cable  
SINGL E REMAIN  
TRACK 02/03 1:17:00  
DISPLAY OFF  
+
10  
STOP PLAY/PAUSE  
10+  
CD disc  
FR  
FF  
PREV  
A-B  
NEXT  
REPEAT  
SET UP  
TO TAL EL APSED  
TRACK 02/03 0 :19:20  
TOTAL REM AIN  
TRACK 02 /03 1:17:00  
ZOOM  
SLOW  
POWER  
OFF ON  
AV  
O
UT  
PHONE  
PROGRAM  
PROGRAM ANGLE  
STEP  
IN PU  
T
9- 1 2V- --  
ENTER  
NAVIGATION  
BUTTONS  
SINGLE ELAPSED  
TRACK 02/03 0:01:53  
SINGLE REMAIN  
TRACK 02/03 0:01:34  
ENTER  
Connect headphones  
L/R  
TITLE  
MENU  
VOL  
SUBTITLE LANGUAGE  
MUTE  
VOL  
Program play  
The player plays the files in an desired order.  
1. Press PROGRAM button and the screen will  
display the program menu.  
1. Con  
nect the headphones.  
Adjust the volume to minimize the volume.  
Connect the headphones to phone jacks.  
2. Adjust the volume to the level that you want.  
AV OUT  
P
HONE  
POWER  
OFF ON  
IN  
P
UT 9- 1 2V- --  
2. Press navigation buttons to choose memory index and then press ENTER button to start input.  
Enter desired titles/chapters numbers by using the numeric buttons. The selected titles/  
1. Phones  
chapters are stored into the memory. Select  
memories can be stored.  
on the menu to see the next page. Up to 20  
NOTE: Leading zero is not necessary. If the track number is more than 10, press the 10+ key  
first and then the unit digit.  
Example: Track 12, press "10+" and then "2"  
Track 21, press "10+" twice and then "1"  
3. Select START on the menu and press ENTER button to start program play or select EXIT  
on the menu and press ENTER button to exit without program play.  
4. To clear programmed items, scroll the navigation button to the item to be cleared and press  
ENTER button, the selected item will be deleted.  
5. To stop the program, press PROGRAM button select STOP on the menu, then press  
ENTER button.  
10  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control preparation  
JPEG CD  
2
OPEN  
Slide show effects  
Battery installation  
Press PROGRAM button to select one of the  
effects when changing from one picture to  
another:  
Insert the batteries while observing the correct  
(+) and (-) polarities as illustrated at right(Fig 1).  
PUSH  
1
1
2
3
4
5
6
7
8
9
WIPE TOP  
WIPE BOTTOM  
WIPE LEFT  
WIPE RIGHT  
DIAGONAL WIPE LEFT TOP  
DIAGONAL WIPE RIGHT TOP  
DIAGONAL WIPE LEFT BOTTOM  
DIAGONAL WIPE RIGHT BOTTOM  
EXTEND FROM CENTRE H  
Service life of batteries  
The batteries normally last for about one  
year although this depends on how often,  
and for what operations, the remote  
control is used.  
TFT MODE  
3
If the remote control fails to work even  
when it is operated near the player, replace  
the batteries.  
10 EXTEND FROM CENTRE V  
11 COMPRESS TO CENTER H  
12 COMPRESS TO CENTER V  
13 WINDOW H  
1
4
7
0
2
5
3
6
9
N/P  
OSD  
Use one size CR2025 battery.  
14 WINDOW V  
8
GOTO  
15 WIPE FROM EDGE TO CENTRE  
16 MOVE IN FROM TOP  
17 NONE  
10+  
PLAY/PAUSE  
10+  
STOP PLAY/PAUSE  
4
NEXT  
PREV  
Note:  
FR  
FF  
PREV  
A-B  
NEXT  
REPEAT  
SETUP  
Fig 1  
Do not use rechargeable (Ni-Cd) batteries.  
Do not attempt to recharge, short-circuit,  
disassemble, heat or throw the batteries  
into the fire.  
Do not drop, step on or otherwise impact  
the remote control. This may damage the  
parts or lead to malfunction.  
ZOOM  
SLOW  
Enjoying Video CD with  
playback control  
PROGRAM  
PROGRAM ANGLE  
STEP  
ENTER  
NAVIGATION  
BUTTONS  
ENTER  
REMOTE CONTROL SENSOR  
When playing VCD 2.0 with PBC, the player  
will show the VCD version and PBC status  
on the screen.  
L/R  
TITLE  
MENU  
VOL  
If the remote control is not going to be  
used for a long time, remove the battery.  
SUBTITLE LANGUAGE  
MUTE  
VOL  
6m  
VCD2.0  
PBC ON  
30 C 30 C  
After a few seconds, a menu will appear on  
the screen.  
TFTMODE  
3
6
9
1
4
7
0
2
5
8
N/P  
OSD  
Remote control operation  
GOTO  
+
10  
STOP PL AY/ PAUS  
E
1 WHAT WILL I DO  
2 HEAR ME CRY  
3 WITHOUT YOU  
4 MOVE CLOSER  
FR  
FF  
PREV  
NEXT  
1. Remove the protective plastic tab before  
operating the remote control(Fig 1).  
2. Point the remote control from no more than  
ZOOM  
SLOW  
A-  
B
REPEAT  
SETUP  
PROGRAM ANGLE  
STEP  
E
N
T
E
R
L/R  
TITLE  
MENU  
VOL  
about 6 m from the remote control sensor and  
SUBTITLE LANGUAGEVOL  
MUTE  
within about 60o of the front of the player(Fig 2).  
NOTE:  
Press numeric buttons to select corresponding  
track, if the track number is under 10, choose  
one of the numeric buttons 0 ~ 9.  
If the track number is exceed 10, press 10+  
button firstly, then press numeric buttons 0 ~ 9.  
The operating distance may vary according to  
the brightness of the room.  
Do not point bright lights at remote control  
sensor.  
Fig 2  
Press NEXT  
button or PREV  
Do not place objects between the remote control and the remote control sensor.  
Do not use this remote control while simultaneously operating the remote control of any  
button, the player will play the next or previous track in the scheduled sequence on the disc.  
other equipment.  
18  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before enjoying DVD/Video CD/CD  
R OTAT ING  
The On-Screen menu language of your player  
has been factory pre-set to English.  
If you want to change the menu language  
to other language, please refer to "Initial  
settings / General setup / OSD lang .  
In the explanation below it is assumed that  
English has been selected as menu language.  
Flipping pictures  
Press UP navigation button to flip the picture vertically.  
Press DOWN navigation button to flipthe picture horizontally.  
Basic play  
TFT MODE  
1. Push POWER knob on the unit to switch  
on the power.  
2. Push the open button to open the disc cover.  
1
4
7
0
2
5
8
3
6
9
N/P  
OSD  
NUMERIC  
BUTTONS  
OPEN  
GOTO  
+
10  
PLAY/PAUSE  
STOP PLAY/PAUSE  
PREV  
NEXT  
FR  
FF  
PREV  
A-B  
NEXT  
REPEAT  
SETUP  
3. Place a disc onto the disc compartment.  
Hold the disc without touching either of its  
surfaces, position it with the printed title side  
facing up, align it with the guides, and place it  
in its proper position.  
4. Close the disc cover, after closing the disc  
cover , play begins. The player starts to read  
the disc immediately.  
ZOOM  
SLOW  
ENTER  
PROGRAM ANGLE  
STEP  
Picture Shrink/Zoom  
NAVIGATION  
BUTTONS  
ENTER  
Press ZOOM button to enter the zoom mode  
MENU  
L/R  
TITLE  
MENU  
VOL  
TITLE  
Press FF button to enlarge picture to 100%, 125%, 150% and 200%  
Press FR button to shrink pictures to 50%, 75%, and 100%  
SUBTITLE LANGUAGE  
MUTE  
VOL  
LOADING  
DVD-VIDEO  
ZOOM 150%  
ZOOM 50%  
5. When a menu screen appears on the TV,  
move the navigation buttons or press the  
numeric buttons to select preferred track  
number, then press ENTER button to confirm.  
If the picture is enlarged, you may press navigation buttons to see other portions of the picture.  
1 WHAT WILL I DO  
2 HEAR ME CRY  
WITHOUT YOU  
3 WITHOUT YOU  
4 MOVE CLOSER  
6.When the menu continues onto another  
screen , press NEXT button to view the  
next screen, or press PREV button to skip  
to previous screen.  
NOTE: Due to the different design of some software titles, NEXT button may not always work.  
7.To stop play and return to the menu screen, press TITLE button, or MENU button.  
17  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Stopping play  
JPEG CD  
Press the STOP button to stop playing a disc.  
NOTE: When player is stopped, the player  
records the point where STOP was pressed  
(RESUME function). Press PLAY again,  
playback will resume from this point . When the  
tray is Opened or STOP is pressed again, the  
RESUME function will be cleared.  
For JPEG picture CD, select the folder you want to play by the navigation buttons and  
press ENTER button to confirm.  
The files in this folder are displayed and select your pictures by using the up/down  
navigation buttons and press ENTER button to start playback. Thumbnail of picture will be  
displayed while you scrolling across the file name.  
Belle  
Skipping ahead or back  
TFT MODE  
Skipping ahead  
Press NEXT  
button during play  
1
4
7
0
2
5
8
3
6
9
N/P  
OSD  
A chapter (DVD) or a track (Video CD/CD) is  
skipped each time the button is pressed.  
Skipping back  
DISC  
Press PREV  
button during play  
GOTO  
Once a folder and file is selected, the picture is loaded onto the screen.  
A chapter(DVD) or a track (Video CD/CD) is  
skipped each time the button is pressed.  
PLAY/PAUSE  
+
10  
STOP PLAY/PAUSE  
FF  
PREV  
NEXT  
FR  
FR  
FF  
PREV  
A-B  
NEXT  
REPEAT  
SETUP  
ZOOM  
SLOW  
PROGRAM ANGLE  
STEP  
ENTER  
NOTE: The time to load and display picture depends on the file size of the pictures.  
L/R  
TITLE  
MENU  
VOL  
Rapid advance(Rapid  
reverse)  
SUBTITLE LANGUAGE VOL  
MUTE  
During playback, press MENU button to return to folder selection or STOP button to  
enter preview mode.  
Press REPEAT button to change play mode:  
During playback, press FF  
button or FR  
button to fast forward/rewind.Press  
PLAY button to resume normal play.  
SHUFFLE All the files will be randomly sorted and play by the order.  
- RANDOM: randomly select any file to play.  
- SINGLE: play one file only.  
-
:
Fast forward  
32X  
2 X  
4X  
FF  
8X  
16 X  
FF  
FF  
- REPEAT ONE: repeat one file.  
- REPEAT FOLDER: all the files in the folder will be played repeatedly.  
- FOLDER: all the files in the folder will be played.  
Fast backward  
2X  
32X  
8 X  
1 6X  
FR  
FR  
FR 4X  
Skip to next/previous picture  
Press NEXT button to skip to the next picture or PREV button to skip to the previous picture.  
If no key is pressed for 5 seconds, it will skip to next picture automatically.  
Pause or play  
Rotating pictures  
Press RIGHT navigation button to rotate the picture clockwise.  
During playback, press PLAY/PAUSE button, the play will be paused, To resume normal  
play, press PLAY button.  
Press LEFT navigation button to rotate the picture counter-clockwise.  
13  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Slow-motion play (DVD/VCD)  
MPEG4 playback  
Press the SLOW button during playback.  
1) Plays the disc at a 1/2 of normal speed at  
first. Each time the button is pressed, the  
play speed becomes 1/4,1/8,1/16.  
2) Press PLAY button, the unit will return to  
normal play.  
1. Insert the disc containing the files in MPEG4  
format to be played and after a few seconds,  
the screen of the monitor will show all the  
folders on the disc:  
00:00 00:00  
001/124  
MP3 playback  
TFT MODE  
SWEAR  
STORY  
LOVE  
TFT MODE  
1. Insert the disc containing the files in Mp3  
format to be played and after a few seconds,  
the screen of the monitor will show all the  
folders on the disc:  
1
4
7
0
2
5
8
3
6
9
N/P  
OSD  
1
4
7
0
2
5
8
3
6
9
NUMERIC  
BUTTONS  
N/P  
OSD  
NUMERIC  
BUTTONS  
OSD  
DISC  
00:00 00:00  
001/124  
GOTO  
GO TO  
GOTO  
1 +  
0
PLAY/PAUSE  
2. Select the folder you want to play by the  
navigation buttons and press the ENTER  
button to confirm.  
3. The files in this folder are displayed and  
select the desired fire by navigation buttons,  
then press the PLAY button to start playback.  
STOP P LAY /PA US E  
+
10  
PLAY/PAUSE  
MUSIC  
SONGS  
LOVE  
PREV  
NEXT  
STOP PLAY/PAUSE  
PREV  
NEXT  
FR  
FF  
PREV  
A-B  
NEXT  
REPEAT  
SETUP  
SLOW  
FR  
FF  
PREV  
A-B  
NEXT  
REPEAT  
SETUP  
REPEAT  
ZOOM  
SLOW  
REPEAT  
ZOOM  
SLOW  
DISC  
PROGRAM ANGLE  
STEP  
ENTER  
Volume level indicator  
Playback indicator  
Current file/Total files  
PROGRAM ANGLE  
STEP  
ENTER  
NAVIGATION  
BUTTONS  
2. Select the folder you want to play by the  
navigation buttons and press the ENTER  
button to confirm.  
3. The files in this folder are displayed and  
select the desired song by navigation buttons,  
then press the PLAY button to start playback.  
NAVIGATION  
BUTTONS  
ENTER  
ENTER  
00:00 00:00  
001/124  
L/R  
TITLE  
MENU  
VOL  
L/R  
TITLE  
MENU  
VOL  
Current  
folder  
SWEAR  
SUBTITLE LANGUAGE  
MUTE  
VOL  
SUBTITLE LANGUAGE  
MUTE  
VOL  
AV KING  
AV  
FIGHT  
M P3 b it rat e ind icato r  
Curre nt song/Tota l songs  
AV PEACE  
Volume level indicator  
Play time  
Total time  
Playback indicator  
AV  
LIVE  
Equalizer indicator  
AV  
AV  
LILY  
SECRET  
01:53 040:36 160  
001/124  
DISC  
Current f older  
MUSIC  
C urrent media file type  
Mp3  
ALAN  
Mp3  
BUZZ  
4. Press NEXT or PREV button, then press  
ENTER button, the player will play the next or  
previous file.  
Mp3  
C ANDY  
Mp3  
D IANA  
Mp3  
M ANDY  
SIMPSON  
Mp3  
5. Press the SLOW button to play the disc at  
a1/2,1/4,1/8 or 1/16 of normal speed.  
6. Press REPEAT button to change play mode.  
- SINGLE: play one file only.  
DISC  
Current media file type  
4. Press NEXT or PREV button to turn the  
current menu page to the next or previous  
menu page.  
- REPEAT ONE: repeat one file.  
- REPEAT ALL: all the files in the folder  
will be played repeatedly.  
- REPEAT OFF: no files in the folder will be played repeatedly.  
- SHUFFLE: all the files will be randomly  
5. Press REPEAT button to change play mode.  
- SINGLE: play one file only.  
- REPEAT ONE: repeat one file.  
- REPEAT FOLDER: all the files in the folder will be played repeatedly.  
- FOLDER: all the files in the folder will be played  
- SHUFFLE: All the files will be randomly sorted and played by the order.  
- RANDOM : randomly select any file to play.  
sorted and played by the order.  
- RANDOM : randomly select any file to play.  
NOTE: The player can only play the disc with MPEG-4 format. The disc with other formats  
may not be played on this unit.  
15  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp PDAs Smartphones EL 6985 User Manual
Silex technology Network Card SX 5000U2 User Manual
Sony Cell Phone CMD MZ5 User Manual
Sony Portable CD Player MZ R4ST User Manual
Sony Projector 53S75 User Manual
Spendor Speaker System SR5 Loudspeaker User Manual
Stiga Lawn Mower 13 2533 45 User Manual
Stiga Lawn Mower 8211 3013 10 User Manual
Sunbeam Freezer SBCF5WBX User Manual
Sylvania CRT Television 6419CTB User Manual