Owner’s Manual
Please read before using this unit.
DVD/CD Player with Video Cassette Recorder
INSTRUCCIONES EN
ESPAÑOL INCLUIDAS.
DVC840G
Supplied Accessories
Remote control (NB177UD) RF cable
with two AA batteries
(WPZ0901TM002)
Audio/Video cables
(WPZ0102TM015 /
WPZ0102LTE01)
Owner’s Manual
(1VMN22455)
If you need additional operating assistance
after reading this owner’s manual, please call
TOLL FREE : 1-800-968-3429
or visit our web site at
Owner's Manual
Table of Contents
Precautions
■ Recording................................................................................. 12
Recording & OTR (One Touch Recording) ............................... 12
Timer Recording........................................................................ 12
Hints for OTR and Timer Recording.......................................... 1ꢀ
Copying a Video Tape............................................................... 14
Laser Safety................................................................................ 2
■ Important Safeguards................................................................ 3
Location and Handling ................................................................ 4
Avoid the Hazards of Electrical Shock and Fire.......................... 4
Moisture Condensation Warning................................................. 4
About Copyright .......................................................................... 4
Notice for Progressive Scan Outputs.......................................... 4
Symbols Used in This Manual..................................................... 4
Maintenance................................................................................ 4
■ About the Video Cassettes and Discs ..................................... 5
Playable Video Cassettes ........................................................... 5
Playable Discs............................................................................. 5
Unplayable Discs ........................................................................ 5
DVD Functions
■ Playback ................................................................................... 15
■ MP3/WMA Playback................................................................. 16
■ On-Screen Display................................................................... 16
■ Search Functions..................................................................... 17
Using Track Search................................................................... 17
Using Title / Chapter Search..................................................... 17
Using Time Search.................................................................... 17
Marker Setup............................................................................. 17
■ Repeat / Random / Programmed Playback............................ 18
Repeat Playback / Repeat A-B Playback
Setup
■ Connections............................................................................... 6
RF Output Channel ..................................................................... 6
Hint for Cable Box or Satellite Box.............................................. 6
Connection to an Audio System.................................................. 6
Connection to a TV ..................................................................... 7
■ Preparation for Use ................................................................... 8
Turn On the Unit for the First Time ............................................. 8
To Add or Delete Channels......................................................... 8
Clock Setup................................................................................. 8
■ Function Overview..................................................................... 9
Front Panel Indicator................................................................... 9
VCR / DVD Switching.................................................................. 9
Front & Rear Terminals............................................................... 9
Remote Control......................................................................... 10
Installing the Batteries for the Remote Control ......................... 10
Random Playback / Programmed Playback.............................. 18
■ Special Settings....................................................................... 19
Subtitle Language / Audio Language / Camera Angle
Black Level Setting / Stereo Sound Mode / Virtual Surround.... 19
■ DVD Setup ................................................................................ 20
LANGUAGE Setting.................................................................. 20
DISPLAY Setting....................................................................... 21
AUDIO Setting........................................................................... 21
PARENTAL Setting................................................................... 22
OTHERS Setting....................................................................... 22
Reset to the Default Setting (Except for PARENTAL Setting) .. 2ꢀ
Information
■ Troubleshooting Guide ........................................................... 23
■ Specifications .......................................................................... 24
■ Language Code List ................................................................ 24
■ Limited Warranty ..................................................................... 24
■ Español..................................................................................... 25
■ Quick Use Guide...................................................................... 27
VCR Functions
■ Playback ................................................................................... 11
■ Other Operations ..................................................................... 11
Index Search............................................................................. 11
Time Search.............................................................................. 11
Auto Repeat .............................................................................. 12
Basic TV Connection
Antenna
or
Cable TV Antenna
signal
or
Cable TV
signal
(Back of DVD/VCR)
(Back of TV)
4
AC
outlets
(Back of TV)
Plug in
ANT-IN
2
ANT-OUT
Disconnect
3
Connect
Connect
From DVD/VCR
From TV
RF cable (supplied)
Please refer to “Connections” on page 6.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
1. Read Instructions - All the safety and operating instruc-
tions should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
ꢀ. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)
FIGURE A
ANTENNA
LEAD
WIRE
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description
otherwise required in item 5.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
NEC – NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
6. Attachments - Do not use attachments not recommended
by the video product manufacturer as they may cause
hazards.
7. Water and Moisture- Do not use this video product near
water, for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
14. Lightning - For added protection for this video product
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This
will prevent damage to the video product due to lightning
and power-line surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with
them might be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind
into this video product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the video product.
18. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
8. Accessories - Do not place this video product on an
unstable cart, stand, tripod, bracket, or table. The video
product may fall, causing serious injury to a child or adult,
and serious damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the video product. Any mount-
ing of the appliance should follow the
manufacturer's instructions and should
use a mounting accessory recommended
by the manufacturer. An appliance and
cart combination should be moved with
care. Quick stops, excessive force, and
uneven surfaces may cause the appli-
ance and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are pro-
vided for ventilation and to ensure reliable operation of
the video product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the video
product on a bed, sofa, rug, or other similar surface. This
video product should not be placed in a built-in installa-
tion such as a bookcase or rack unless proper ventilation
is provided or the manufacturer's instructions have been
adhered to.
19. Damage Requiring Service - Unplug this video product
from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
10. Power Sources - This video product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or
local power company. For products intended to operate
from battery power, or other sources, refer to the
operating instructions.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by
following the operating instructions. Adjust only those
controls that are covered by the operating instructions
as an improper adjustment of other controls may result
in damage and will often require extensive work by a
qualified technician to restore the video product to its
normal operation.
11. Grounding or Polarization - This video product is
equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the appliance.
1ꢀ. Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the video product, be sure
the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/
NFPA No. 70, provides information with regard to proper
e. If the video product has been dropped or damaged in
any way.
f. When the video product exhibits a distinct change in
performance this indicates a need for service.
20. Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
21. Safety Check - Upon completion of any service or repairs
to this video product, ask the service technician to per-
form safety checks to determine that the video product is
in proper operating condition.
22. Heat - This video product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
–
–
ꢀ
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and Handling
Symbols Used in This Manual
•
Do not stand this unit up vertically. Install this unit in a hori-
zontal and stable position. Do not place anything directly on
top of this unit. Do not place this unit directly on top of the TV.
The following symbols appear in some headings in this manual.
: Description refers to playback or recording of
video cassette tapes.
• Depending on the TV, noise or disturbance of the picture
and/or sound may be generated if this unit is placed too
close to your TV. In this case, please ensure enough space
between your TV and this unit.
• Do not cover or place this unit in enclosed spaces to prevent
excessive temperature build up.
:
Description refers to playback of DVD-Video discs.
: Description refers to playback of Audio CDs.
: Description refers to playback of MPꢀ files.
: Description refers to playback of WMA files.
•
Do not place this unit in direct sunlight, or near heat sources.
• Depending on the environment, the temperature of this unit
may increase slightly. This is not a malfunction.
• Keep this unit away from strong magnetic objects.
• Do not place any object containing water or other liquids on
this unit. In the event that liquid should enter the cabinet,
unplug this unit immediately and contact the retailer or an
Authorized Service Center immediately.
• Do not remove this unit cabinet. Touching parts inside the
cabinet could result in electric shock and/or damage to this
unit. For service and adjustment inside the cabinet, call a
qualified dealer or an Authorized Service Center.
Maintenance
SERVICING
• Please refer to relevant topics on the “Troubleshooting
Guide” on page 2ꢀ before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call
our help line mentioned on the front page to locate an
Authorized Service Center.
• Be sure to remove disc and video tape and unplug the AC
power cord from the output before carrying this unit.
Avoid the Hazards of Electrical Shock and Fire
CLEANING THE CABINET
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from
AC wall outlet. Grasp it by the plug.
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
• If, by accident, water is spilled on this unit, unplug the power
cord immediately and take the unit to our Authorized Service
Center for servicing.
CLEANING DISCS
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a circu-
lar motion.
•
Do not put your fingers or objects into the unit cassette holder.
Moisture Condensation Warning
•
Do not use solvents such as benzine, thinner, commercially avail-
able cleaners, detergent, abrasive cleaning agents or antistatic
spray intended for analog records.
Moisture may form inside this unit under the following condi-
tions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When this unit is suddenly moved from a cold to warm envi-
ronment.
If moisture forms inside this unit, it may not operate
properly or damage the video tape. In such case, turn on
the power and wait for more than 2 hours for the moisture to
evaporate.
CLEANING THE DISC LENS
• If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting Guide” in
this Owner’s Manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center
for inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
• When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.
About Copyright
• Always store the disc in its protective case when it is not
used.
Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is
prohibited.
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or remove a
cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted while
the TV program reception is clear. Dirt accumulated on the
video heads after a long period of use, or the usage of rental
or worn tapes can cause this problem. If a streaky or snowy
picture appears during playback, the video heads in your
unit may need to be cleaned.
Notice for Progressive Scan Outputs
Consumers should note that not all high definition television
sets are fully compatible with this product and may cause
artifacts to be displayed in the picture. In case of picture prob-
lems with 525 progressive scan output, it is recommended
that the user switch the connection to the ‘standard definition’
output. If there are questions regarding your TV set compat-
ibility with this 525p DVD player, please contact our customer
service center.
1. Please visit your local Audio/Video store and purchase a
good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem,
please call our help line mentioned on the front page to
locate an Authorized Service Center.
Hint
•
Remember to read the instructions along with the video head cleaner before use.
• Clean video heads only when problems occur.
Note to CATV system installer
“WMA” (Windows Media Audio) is a new audio codec
developed by Microsoft® in the United States of America.
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground should be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
–
–
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Video Cassettes and Discs
Playable Video Cassettes
Use only cassettes marked
with this unit.
Playable Discs
Playable
Mark (logo)
discs
Recorded
signals
Disc
size
Region code
Disc types
DVD-Video
*1, 2, ꢀ, 5, 9
or
DVD-RW
DVD-R
*1, ꢀ, 4, 5, 6,
8, 9, 10
Example
12 cm
or
8 cm
Title 1
Title 2
Digital video
(MPEG2)
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1
Chapter 2
DVD+RW
DVD+R
*1, ꢀ, 4, 5, 7,
8, 9, 10
Audio CD
*ꢀ, 5, 9
Digital audio
Audio CD
Example
Track 1
Track 2
Track 5
Track 6
Track 3
Track 4
12 cm
or
8 cm
CD-RW
CD-R
*ꢀ, 4, 5, 8, 9
Digital audio
or
MPꢀ/WMA
MP3 / WMA
Example
Group 1
Group 2
*11
Track 1
Track 3
Track 2
Track 4
Track 5
Track 6
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*ꢀ: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or spe-
cial properties of discs.
*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them
back. Even if they are played back, the sound or video quality will be compromised.
*6: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD recorder. However,
depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may
not be smooth, etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying
the DVD recorder.
*7: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at
all the picture or sound may not be smooth, etc.
*8: If the recorded portion of the disc is too small (less than 2 ꢀ/16 inches (55 mm) across), it may not play back properly.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
*10: Discs Recorded in the VR (Video Recording) format cannot be played back.
*11: This DVD/CD player cannot playback the disc contents protected by Windows Media Digital Rights Management (DRM).
Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in
the United States and/or other countries.
Unplayable Discs
NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / DVD-Audio / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL /DTS-CD / DVD-ROM for
personal computers / CD-ROM for personal computers
On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.The sound recorded on the high density Super Audio
CD layer cannot be delivered.
Any other discs without compatibility indications
–
–
5
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Connections
Please refer to “Basic TV Connection” on the front page before you use this unit.
RF Output Channel
If channel 3 has been already occupied
for broadcasting,
5) After a few seconds, press and hold
[PLAY B] on the unit for ꢀ seconds.
• The RF output channel will change to
channel 4 from channel ꢀ and you will
see a playback picture.
• When a picture does not appear on the
TV screen, repeat step 4.
Hint
• The RF output channel may change
when you adjust tracking during play-
back. In this case, stop the playback,
and start the playback again. After
that, press and hold [PLAY B] on the
unit for ꢀ seconds again.
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into this unit.
ꢀ) Press [OUTPUT] on the unit so that the
VCR OUTPUT light is lit.
•
If noise appears on the TV screen, press
[VCR/TV] on the remote control.
6) Press [STOP C] to stop playback.
4) Press [PLAY B] once.
Hint for Cable Box or Satellite Box
To select channels of the cable box or satellite box
1) Turn on the unit by pressing [POWER], then press
[VCR/TV]. The POWER indicator on the front panel will
(Back of DVD/VCR)
(Cable box or
Satellite box)
ANT-IN
Satellite or
Cable TV
signal
IN
O
U
T
G
K
H
L
ANT-OUT
light, then press [SKIP/CH.
/
,
/
] to select chan-
RF cable
(supplied)
nel ꢀ or 4 (the same channel as the output channel of the
cable box or satellite box).
• If you use the channel 4, you need to change the unit’s
RF output to channel 4. Refer to “RF Output Channel”.
2) At the TV, select channel ꢀ or 4 (the same channel as you
have selected at step 1).
(Back of TV)
Select this connection when you want to view or record a
scrambled channel. With this connection, channels cannot be
changed on the unit. You can view or record ONLY
the channels you have selected on the cable box or the
satellite box.
ꢀ) On the cable box or satellite box, select the channel you
want to view or record.
•
While you are recording, only the recorded channel can be viewed.
Connection to an Audio System
Method 1
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Stereo system
Audio
COAXIAL
L
R
Digital audio
input jack
Analog audio
input jacks
Audio Coaxial
Digital cable
(commercially
available)
Audio cable
(supplied)
DVD
AUDIO S-VIDEO
OUT OUT
DVD/VCR
AUDIO OUT
VCR
COMPONENT
DIGITAL
VIDEO OUT
AUDIO OUT
L
AUDIO OUT
(Analog)
R
COAXIAL
DIGITAL
AUDIO OUT
DVD/VCR
or
DVD
SETUP > QUICK>
DOLBY DIGITAL
Setting
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
OUT OUT
AUDIO OUT
Connection
L
Connecting to a Dolby Digital decod-
er for Dolby Digital audio output.
R
BITSTREAM
(DVD mode only)
Connecting to the other equipment
(an MD deck or DAT deck etc.) with-
out Dolby Digital decoder.
PCM
Hint
• Playing a DVD using incorrect settings may generate noise distortion and may
also damage the speaker.
* To complete these settings, refer to pages 20-21.
Hint
• The audio source on a disc in a Dolby Digital Multi channel surround format
cannot be recorded as digital sound by an MD or DAT deck.
• By hooking this unit up to a Multi channel Dolby Digital decoder, you can enjoy
high-quality Dolby Digital Multi channel surround sound as heard in the movie
theaters.
• Playing a DVD using incorrect settings may generate noise distortion and may
also damage the speakers.
–
–
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a TV
Basic Audio
Method 1
Method 2
Method 3
TV
AUDIO IN
L
R
Better picture
Good picture
Best picture
COMPONENT
VIDEO IN
Y
Y
S-VIDEO IN
VIDEO IN
PB
CB
or
Audio cable
(supplied)
PR
CR
S-Video cable
(commercially
available)
Video cable
(supplied)
DVD/VCR
DVD/VCR
AUDIO OUT
VCR
Component Video cable
(commercially available)
L
DVD
DVD/VCR
AUDIO OUT
VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT
OUT
OUT
Y
L
AUDIO IN
VIDEO IN
L
R
C
PB/
B
R
COAXIAL
VIDEO OUT
R
C
PR/
R
DVD
AUDIO S-VIDEO
OUT OUT
DVD/VCR
VCR
DVD
AUDIO S-VIDEO
OUT OUT
COMPONENT
COMPONENT
VIDEO OUT
VIDEO OUT
A
or
Y
DVD
AUDIO S-VIDEO
OUT OUT
CE
DIGITAL
AUDIO OUT
C
PB/
B
VIDEO OUT
L
C
PR/
R
R
AUDIO OUT
(Analog)
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
Hint
• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system.
• The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
If your TV is compatible with 525 progressive scanning and you want to enjoy that high quality picture;
You must select the connection Method ꢀ above and progressive scanning mode. To set the mode, set “PROGRESSIVE” to
“ON” in the SETUP menu, so that the PROGRESSIVE SCAN indicator on the front panel lights on. See pages 20 to 21 for
more details.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not
be output at all.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in the SETUP menu or by pressing and holding
[PLAY B] on the front of the unit for more than 5 seconds, so that the PROGRESSIVE SCAN indicator on the front panel
lights off.
After you have completed connections
Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel
(usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompa-
nying your TV.
INPUT MODES FOR COMMON TV BRANDS
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
AUX
Panasonic:
RCA:
Samsung:
Sanyo:
Sharp:
Sony:
Toshiba:
Zenith:
TV/VIDEO
LINE1, LINE2, 00, 90, 91, 92, 9ꢀ
INPUT, TV/VCR, 00, 90, 91, 92, 9ꢀ
INPUT, TV/VCR, 00, 90, 91, 92, 9ꢀ
TV/VIDEO
Hitachi:
INPUT, AUX
VIDEO
JVC:
VIDEO, VIDEO1, VIDEO2, VIDEOꢀ
00
Kenwood:
LXI-Series:
Magnavox:
AUX
00
AUX CHANNEL
VIDEO1, VIDEO2, VIDEOꢀ
TV/GAME
00
–
–
7
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation for Use
To Preset the Channel Again
Turn On the Unit for the First Time
1) Press [MENU] until the main menu appears.
2) Select “CHANNEL SET UP” by using [K//L], then press [B]
ꢀ) Select “AUTO SET UP” by using [K//L], then press [B].
After scanning, the tuner stops on the lowest memorized
channel.
VCR
Operation described in this manual are
mainly based on the remote control.
.
Turn on the TV and set it to channel ꢀ.
• If channel ꢀ has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.
1
2
To Change the On-Screen Language
Select your language in the first time you turn on this unit.
1) Press [MENU] until the main menu appears.
2) Select “LANGUAGE SELECT” by using [K/L], then
press [B].
ꢀ) Select “ENGLISH” , “FRANCAIS” or “ESPAÑOL” by
using [K/L] then press [CLEAR/C.RESET].
LANGUAGE SELECT
Then press [B] to go to next step.
B ENGLISH
FRANCAIS
ESPAÑOL
[ON]
POWER
or
CH 01
Press [B] to start Auto Set Up.
3
Hint
AUTO SET UP
• If you accidentally select Spanish or French and need English: Press [MENU]
and choose SELEC. IDIOMA or SELECTION LANGUE. Press [B] and select
ENGLISH. Finally, press [CLEAR/C.RESET].
• To add or delete channels in this unit, [SKIP/CH. G/K, H/L] button works
on the channel number memorized in this unit, [K/L] works on all.
Do you connect the cable from the cable box or the satellite box to the unit’s
ANT-IN jack?
YES
NO
Clock Setup
VCR
Yes Press [MENU] to exit.
• Refer to “Hint for Cable Box or Satellite Box” section on page 6.
Press [MENU] and select “CLOCK SET”.
Then press [B] to go to next step.
No Please wait for a few minutes. After scanning...
• The tuner stops on the lowest memorized channel.
• You can select only the channels memorized in this unit by using
[SKIP/CH. G//K, H//L] (or [CHANNEL K///L]).
• If “AUTO SET UP” appears on the TV screen again, check the cable
connections. Then, press [B] once again.
1
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
B CLOCK SET
[OFF]
MENU
LANGUAGE SELECT
or
• If the clock is not set, the CLOCK SET screen appears when you press
[MENU]. In this case, go to step 2.
Hint
• Repeat these steps only if either there was a power failure or this unit has been
unplugged for more than ꢀ0 seconds.
CLOCK SET
Select the current month.
Then press [B] to go to next step.
2
3
MONTH DAY
1 0 – –
YEAR
– – – –
/
To Select a Channel
HOUR MINUTE AM/PM
– –
:
– –
– –
or
You can select a channel by using the Number buttons or
[SKIP/CH.
G
/
K
,
H/L].
CLOCK SET
Select the current day.
Then press [B] to go to next step.
Notes for using the Number buttons:
MONTH DAY
1 0 0 2
YEAR
– – – –
• When selecting cable channels which are higher than 99,
enter channel numbers as a three-digit number. (for exam-
ple: 117, press [1], [1], [7])
/
HOUR MINUTE AM/PM
– –
:
– –
– –
or
• You must precede single-digit channel numbers with a zero.
(for example: 02, 0ꢀ, 04 and so on)
CLOCK SET
Select the current year.
Then press [B] to go to next step.
4
5
MONTH DAY
1 0 0 2
YEAR
/
2 0 0 6
To Add or Delete Channels
HOUR MINUTE AM/PM
– –
:
– –
– –
or
VCR
Select the current hour.
Then press [B] to go to next step.
CLOCK SET
- M E N U -
Press [MENU] and select “CHANNEL SET UP”.
Then press [B] to go to next step.
MONTH DAY
1 0
YEAR
1
TIMER PROGRAMMING
/
0 2 MON 2 0 0 6
AUTO REPEAT
B CHANNEL SET UP
CLOCK SET
[OFF]
HOUR MINUTE AM/PM
MENU
0 5
:
– –
– –
LANGUAGE SELECT
or
or
• If the clock is not set, the “CLOCK SET” screen appears when you
CLOCK SET
Select the current minute.
Then press [B] to go to next step.
6
7
8
press [MENU]. In this case, press [MENU] again.
MONTH DAY
1 0
YEAR
/
0 2 MON 2 0 0 6
CHANNEL SET UP
HOUR MINUTE AM/PM
Select “MANUAL SET UP”.
2
3
4
5
0 5
:
4 0
– –
or
AUTO SET UP
Then press [B] to go to next step.
B MANUAL SET UP
or
CLOCK SET
Select “AM” or “PM”.
MONTH DAY
1 0
YEAR
/
0 2 MON 2 0 0 6
MANUAL SET UP
Select the channel to be added or deleted.
or
HOUR MINUTE AM/PM
0 5
:
4 0
P M AM
B PM
CHANNEL ꢀ0 (CATV)
ADD
or
or
or
To exit the CLOCK SET screen
MANUAL SET UP
Select “ADD” or “DELETE”.
CHANNEL ꢀ0 (CATV)
DELETE
or
Hint
• To go back one step, press [s] (during steps 2 to 7).
• Your clock setting will be lost if either there is a power failure or this unit has
been unplugged for more than ꢀ0 seconds.
CLEAR/
C. RESET
To exit the menu
–
–
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Overview
Front Panel Indicator
Lights up when the progressive scan system is activated.
Lights up when power is on.
Lights up when the inserted
Lights up during a recording.
Blinks when a recording is paused.
Lights up when this unit
is in the DVD mode.
disc is being played back.
Blinks when an unacceptable
disc is inserted.
OPEN/CLOSE
OUTPUT
POWER
VCR
DVD PROGRESSIVE SCAN
SKIP STOP PLAY
REW
F.FWD STOP/EJECT PLAY
/
REC/OTR
H
G SKIP
CHANNEL
REV
FWD
Lights up when the Timer Recording or an
OTR recording has been set.
Lights up when this unit is
in the VCR mode.
VCR / DVD Switching
You must select which component you wish to operate with
[OUTPUT] at first, as this product is a combination of a VCR
and a DVD player.
OPEN/CLOSE
OPEN/CLOSE
/EJECT
POWER
SPEED
AUDIO
OUTPUT
R
DVD E SCAN
SKIPH
PLAY
SKIPG
CHANNEL
1
4
7
2
5
8
3
6
9
SKIP/CH.
FWD
VCR/TV
SLOW
VCR MODE
Press [VCR] on the remote control.
(Verify that the VCR OUTPUT light is lit.)
0
VCR
+10
DVD
VCR button
DVD button
DISPLAY
PAUSE
PLAY
STOP
DVD MODE
REC/OTR
MENU
OUTPUT
Press [DVD] on the remote control.
ENTER
(Verify that the DVD OUTPUT light is lit.)
VCR
DVD
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
DVD OUTPUT
light
MODE
ZOOM
C. RESET
SUBTITLE
T-SET
Hint
ANGLE
REPEAT
A-B
• Pressing only [OUTPUT] on the front panel DOES NOT switch the mode of the
remote control. You MUST select the correct mode on the remote control.
OUTPUT button
VCR OUTPUT light
Front & Rear Terminals
2
3
DVD
DVD/VCR
VCR
POWER
ANT-IN
COMPONENT
VIDEO OUT
AUDIO OUT
DIGITAL
AUDIO S-VIDEO
VCR
OUT
OUT
AUDIO OUT
REW
F.FWD STOP/EJECT PLAY
/
REC/OTR
ANT-IN
Y
L
4
O IN
AUDIO IN
L
I
IDEO IN
ANT-OUT
R
1
10
9
C
PB
/
ANT-OUT
B
COAXIAL
VIDEO OUT
VIDEO IN
R
C
/
PR
R
[Rear Panel]
[Front Panel]
6
3
8 7
6
5
6: VIDEO IN jack
1: DVD AUDIO OUT (analog) jacks
Connect a cable coming from the video out jack of a camcorder, another VCR or
an audio-visual source (laser disc player, video disc player, etc.) here.
Connect the supplied audio cable here through the audio in jacks of a television
or other audio equipment. (DVD only)
7: DVD/VCR VIDEO OUT jack
2: DVD/VCR AUDIO OUT jacks
Connect the supplied video cable here through the video in jack of a television.
8: COMPONENT VIDEO OUT jacks
Connect optional COMPONENT VIDEO cable here through the COMPONENT
VIDEO in jacks of a television. (DVD only)
9: S-VIDEO OUT jack
Connect the supplied audio cable here through the audio in jacks of a television
or other audio equipment.
3: AUDIO IN jack
Connect audio cable coming from the audio out jack of a camcorder, another
VCR or an audio source here.
4: ANT-IN jack
Connect your antenna or cable box here.
Connect an optional S-VIDEO cable here through the S-VIDEO in jack of a tel-
evision. (DVD only)
10: DIGITAL AUDIO OUT COAXIAL jack
5: ANT-OUT jack
Connect an optional coaxial digital audio cable here through the coaxial digital
audio in jack of a decoder or audio receiver. (DVD only)
Connect the supplied RF cable to the antenna input jack of a television.
–
–
9
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
DVD mode
VCR mode
Disc/Tape
OPEN/CLOSE
/EJECT
Button
POWER
SPEED
AUDIO
(Alphabetical order)
1
4
7
2
5
8
0
3
•To select channel.
•The +10 button has no
effect in VCR mode.
6
1
4
7
2
5
8
3
6
9
•To select chapter or title
directly.
•To select track directly.
SKIP/CH.
9
+10
VCR/TV
SLOW
•
•
To search forward/back-
ward through a disc.
To begin slow forward/reverse through a disc.
playback in the pause mode.
•To search forward/backward
•To forward/backward a
tape.
0
VCR
+10
DVD
DISPLAY
PAUSE
A-B
•To repeat between your
chosen point A and B.
•
To repeat between your chosen
point A and B. (CD)
PLAY
ANGLE
AUDIO
•To select camera angles
on a disc.
STOP
REC/OTR
MENU
•To select audio languages •To select STEREO, L-ch or R-ch.
on a disc.
ENTER
(CD)
•To clear the markers. (CD)
•To remove status number in
program input.
SETUP TOP MENU
RETURN
•To clear the markers.
•To clear the numbers
entered incorrectly.
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
CLEAR/
C. RESET
•To exit the VCR Menu.
•To reset the tape counter.
•To clear the numbers entered
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
•To cancel the point for A-B incorrectly.
repeat.
•To cancel the point for A-B
repeat. (CD)
•To display the current
•To display the current disc mode. time, tape counter, and
channel.
DISPLAY
•To display the current disc
mode.
•
To select the DVD output mode. •To select the DVD output mode.
DVD
•To activate the remote
control in DVD mode.
•To activate the remote control in
DVD mode.
•
•
•
To select an item
on the VCR Menu.
To advance to the
next VCR Menu.
To go back one
step during clock
and timer setting.
ENTER
•To move the cursor and
determine its position.
•To move the cursor and
determine its position.
Installing the Batteries for
the Remote Control
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote
control.
MENU
•
To call up the Menu on a
disc.
•To call up the file list.
(MPꢀ/WMA)
•To call up the VCR Menu.
•To set black level on/off.
•To set virtual surround
on/off.
•To arrange the playing order or
play randomly.
•To set virtual surround on/off.
MODE
OPEN/CLOSE
/EJECT
•To open or close the disc
tray.
•To eject the video
cassette from the VCR.
•To open or close the disc tray.
1
2
3
•To pause tape playback or
recording.
•To advance playback one
frame at a time.
•To pause disc playback.
•To advance playback one •To pause disc playback.
frame at a time.
PAUSE
•To begin disc playback.
•To turn the unit on/off.
•To begin disc playback.
•To turn the unit on/off.
•To begin tape playback.
PLAY
POWER
Keep in mind the following when using
the remote control:
• Make sure that there is no obstacle
between the remote control and the
remote sensor on the unit.
• The maximum operable ranges from
the unit are as follows.
- Line of sight: approx. 2ꢀ feet (7m)
- Either side of center:
approx. 16 feet (5m) within ꢀ0°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (ꢀm) within ꢀ0°
•To turn the unit on/off.
REC/OTR
•To start a recording or
One Touch Recording.
•To play a track or disc repeat-
edly. (CD)
•To play a track, group or disc
repeatedly. (MPꢀ/WMA)
REPEAT
•To play a chapter or title
repeatedly.
RETURN
•To return to the previous
operation in menu.
•To return to the previous opera-
tion in menu.
SEARCH
MODE
•To search chapter, title or •To search track.
•To call up the index or
time search menu.
time.
•To search time. (CD)
•To set or search the markers. (CD)
•
To set or search the markers.
SETUP
•To call up the DVD setup
menu.
•To call up the DVD setup menu.
•To change channels.
•To adjust the tracking
manually during playback.
SKIP/CH.
SKIP/CH.
•To skip chapters or titles. •To skip tracks.
SLOW
• To view the tape in slow
motion.
SPEED
•To select the recording
speed.
•To stop playback or
recording.
STOP
•To stop playback.
•To stop playback.
Hint
SUBTITLE
T-SET
•To select subtitles on a
disc.
•
To put the VCR into standby
mode for a Timer Recording.
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
•To return to the top file of the
highest hierarchy in the program
and file list. (MPꢀ/WMA)
TOP MENU
•To call up the Top Menu
on a disc.
•
To select the VCR output mode.
VCR
•To activate the remote
control in VCR mode.
VCR/TV
•To select DVD position or •To select CD/MPꢀ/WMA position •To select VCR position or
TV position.
or TV position.
TV position.
ZOOM
•To magnify part of a
picture. (x2/x4)
–
–
Download from Www.Somanuals.com1. 0All Manuals Search And Download.
EN
VCR Functions
Playback
Before:
Turn on the TV and set it to channel ꢀ.
• If channel ꢀ has been already occupied for broadcasting, see “RF Output Channel” section on page 6.
VCR
Hint
1
4
• When a tape with-
out record tab is
inserted, the unit
will start playback
automatically.
1 Insert a video cas- 2 To start playback
OPEN/CLOSE
/EJECT
POWER
SPEED
AUDIO
sette into this unit.
1
4
7
2
5
8
3
6
9
PLAY
SKIP/CH.
• Tracking will be
POWER
VCR/TV
SLOW
REW
F.FWD STOP/EJECT PLAY
/
REC/OTR
automatically
adjusted upon play-
back. To adjust the
tracking manually,
press [SKIP/CH.
G/K, H/L] (or
0
VCR
+10
DVD
DISPLAY
PAUSE
3 To stop playback
4
To eject the cassette
OPEN/CLOSE
/EJECT
STOP
PLAY
2
3 2
4
STOP
[
CHANNEL
K/L]).
3
Other Operations
To cue or review picture during playback (Picture Search)
Counter Reset
Press [CLEAR/C.RESET].
To play back in slow motion (Slow mode)
Press [SLOW] during playback or the still mode.
• If the noise bars appear on the TV screen, you can reduce it
Use [g] or [h ]([F.FWD g] or [REW h]).
• Press it again and the unit will search in super high speed.
(in the SLP mode only)
To freeze the picture on TV screen during playback (Still mode)
Press [PAUSE F]. Each time you press the button, the
by using [SKIP/CH. G/K, H/L] (or [CHANNEL
K/L]).
picture will be forwarded by one frame.
Auto Rewind
•
If the picture begins to vibrate vertically in the still mode,
When a tape reaches its end during playback, fast-forward
or recording (except Timer Recording and One Touch
Recording), the tape will automatically rewind to the beginning.
After rewinding finishes, the unit will eject the tape.
stabilize the picture by using [SKIP/CH. G/K, H/L] (or
[
CHANNEL
K/L]).
• If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV if equipped.
Hint
• Still/Slow mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the video head.
• To return to playback from the Picture Search/Still/Slow mode, press [PLAY B].
Index Search
Time Search
You can skip the program backward and forward by the
Index Mark.
You can search backward and forward a specific
length of time on a tape.
VCR
VCR
• Insert a tape into this unit.
• Insert a tape into this unit.
Press [SEARCH MODE] once.
Press [SEARCH MODE] twice.
1
1
SEARCH
SEARCH
MODE
MODE
TIME SEARCH
INDEX SEARCH
– : – –
– –
Select the desired length of time for fast forwarding or
To select Index Mark
2
2
rewinding.
INDEX SEARCH
0 ꢀ
TIME SEARCH
2 : 5 0
or
01 ~ 20
or
CURRENT PROGRAM
0:01~ 9:59
(1 minute~9 hours and 59 minutes)
Beginning
of the tape
End of
the tape
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02
01
01
02
03
To rewind
3
INDEX MARK
ss
To rewind
3
4
ss
To fast forward
BB
To fast forward
BB
After searching, it automatically starts playback.
4
PLAYB
After searching, it automatically
starts playback.
PLAYB
Hint for Index Search & Time Search
• These functions are not available during recording.
• Press [STOP C] to stop the search.
• If a tape ends during a search, your search will be cancelled and the tape will
rewind to the beginning.
Hint
• The Index Mark will be made automatically at the beginning of each recording.
• The time gap between Index Marks should be greater then 1 minute for SP
mode, 2 minutes for LP mode and ꢀ minutes for SLP mode.
–
–
11
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Repeat
This function will playback a tape repeatedly from the beginning when the tape reaches the end.
VCR
Press [B] to set
“AUTO REPEAT”, “ON” or “OFF”.
- M E N U -
- M E N U -
Press [MENU] and select
“AUTO REPEAT” during playback.
2
1
TIMER PROGRAMMING
TIMER PROGRAMMING
B AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
B AUTO REPEAT
[ON]
CHANNEL SET UP
CLOCK SET
MENU
LANGUAGE SELECT
LANGUAGE SELECT
or
Hint
• To cancel Auto Repeat, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [CLEAR/C.RESET] to exit.
• If menu remains on the TV screen after step 2, press [CLEAR/C.RESET] to exit.
• The Auto Repeat playback will start automatically if you set “AUTO REPEAT” to “ON” in the stop mode.
Recording
Recording & OTR (One Touch Recording)
Before: Turn on the TV and set it to channel ꢀ.
• If channel ꢀ has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.
1
2
3
6
OPEN/CLOSE
/EJECT
POWER
SPEED
AUDIO
OPEN/CLOSE
VCR
1
4
7
2
5
8
3
6
9
SKIP/CH.
POWER
REW
F.FWD STOP/EJECT PLAY
/
REC/OTR
1
3
Insert a cassette with 2 Select the channel
tab into this unit. to record.
CHANNEL
VCR/TV
SLOW
2
1
4
7
2
5
8
0
3
6
9
0
VCR
+10
DVD
DISPLAY
PAUSE
SKIP/CH.
or
5 6 4
PLAY
STOP
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record tab. To record on
it later, cover the hole with adhesive tape.
5
4
REC/OTR
MENU
Press [SPEED] to select the desired tape speed.
ENTER
SPEED
SETUP TOP MENU
RETURN
Record tab
Tape Speed
Type of tape
SP mode
Recording/Playback Time
T60
T120
2hours
6hours
T160
1hour
3hours
2-2/3hours
8hours
SP
You CAN NOT dub a DVD to a videotape.
SLP mode
To stop recording temporarily (Pause mode)
Press [PAUSE F].
4 Press [REC/OTR] repeatedly to select the
desired recording length.
• During the rec-pause mode, five
C
marks appear on the TV screen. Each
C
REC/OTR
mark represents one minute.
• Press it again to resume recording.
REC
OTR(0:30)
OTR(1:00).....
(Normal recording)
REC
OTR(8:00)
OTR(7:30)
• Pause mode will be automatically cancelled after 5 minutes to prevent damage
to the tape and the video head.
5 To stop recording
6 To eject the
Hint
recorded cassette
OPEN/CLOSE
/EJECT
• If you want to watch one channel while recording another...
1) Press [VCR/TV] to put the unit in TV position.
STOP
2) Select a channel you want to watch with the cable box or the satellite box.
Timer Recording
VCR
Select the desired date.
Then press [B] to go to next step.
•
Insert a tape with its record tab into the unit.
4
5
Press [MENU], then select “TIMER PROGRAMMING”.
ONE TIME PROGRAM
PROGRAM NUMBER
1
or
- M E N U -
TIMER PROGRAMMING
1
DATE
1 0 / 2 ꢀ MON
B TIMER PROGRAMMING
PROG
DATE
START TIME
END TIME
CHANNEL
REC SPEED
12ꢀ45678
MENU
START TIME – – : – – – –
END TIME – – : – – – –
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
CHANNEL
– –
LANGUAGE SELECT
REC SPEED – –
or
Available program number flashes.
• You can set a program one year in advance.
Select an empty program number.
Then press [B] to go to next step.
PROGRAM NUMBER
DATE – – / – –
1
2
3
Select the desired start time (hour).
Then press [B] to go to next step.
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL
– –
REC SPEED – –
or
ONE TIME PROGRAM
PROGRAM NUMBER
or
1
DATE
1 0 / 2 ꢀ MON
START TIME 0 7 : ꢀ 0 – –
END TIME – – : – – – –
Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.
CHANNEL
– –
PROGRAM NUMBER
1
Then press [B] to go to next step.
REC SPEED – –
B
ONCE
DAILY
WEEKLY
or
or
–
–
Download from Www.Somanuals.com1. 2All Manuals Search And Download.
EN
Select “AM” or “PM”.
Then press [B] to go to next step.
Press [SUBTITLE/T-SET] to set timer standby mode.
6
10
SUBTITLE
ONE TIME PROGRAM
PROGRAM NUMBER
T-SET
1
DATE
1 0 / 2 ꢀ MON
START TIME 0 7 : ꢀ 0 PM
END TIME – – : – – – –
or
CHANNEL
– –
•
indicator on the front panel lights up. The unit will change to the
DVD mode.
REC SPEED – –
AM
B PM
Hint
Repeat the procedure in steps 5 and 6 to set the end time.
• To go back one step, press [s] during steps ꢀ to 9.
7
8
To Check, Correct or Cancel a Timer Program
1) Press [SUBTITLE/T-SET] then, [VCR] on the remote
control.
Select the desired channel.
Then press [B] to go to next step.
ONE TIME PROGRAM
PROGRAM NUMBER
1
2) Select main menu by pressing [MENU].
ꢀ) Select “TIMER PROGRAMMING” by using [K/L], then
press [B].
DATE 1 0 / 2 ꢀ MON
START TIME 0 7 : ꢀ 0 PM
END TIME 0 8 : ꢀ 0 PM
or
CHANNEL
1 6
REC SPEED – –
4) Select the program number which you want to check by
using [K/L]. The details of the program you selected will
appear on the TV screen.
• Go to the digit you want to change by using [s / B].
Then, enter correct numbers by using [K/L].
• You may cancel the entire program by pressing [s]
while the program number blinks.
• If you have connected the unit to a cable box or satel-
lite box as the connection on page 6, select the VCR to
channel 3 or 4 (the RF output channel of the VCR). Then,
select the desired channel at the cable box or satellite box.
Leave the cable box or satellite box on for Timer Recording.
Select the desired recording speed, then press
9
5) Press [CLEAR/C.RESET] to exit.
6) Press [SUBTITLE/T-SET] to return to timer standby
mode.
[CLEAR/C.RESET].
ONE TIME PROGRAM
PROGRAM NUMBER
DATE
1
CLEAR/
C. RESET
1 0 / 2 ꢀ MON
START TIME 0 7 : ꢀ 0 PM
END TIME 0 8 : ꢀ 0 PM
or
CHANNEL
1 6
REC SPEED SP
To cancel a Timer Recording in progress
B SP
SLP
Press [STOP/EJECT
C
A] on the unit.
• To set another program after step 9, press [
B].
Then, continue with step 2.
Hints for OTR and Timer Recording
• Press [VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR
mode, then press [SUBTITLE/T-SET].
• If a tape is not in the unit or does not have the record tab,
indicator on the front panel blinks and Timer Recording
cannot be performed. Please insert a recordable tape.
• When Timer Recordings are set,
recording, press [SUBTITLE/T-SET] so that
indicator on the front panel lights up. To use the VCR as usual until the time for the
indicator lights off. Press [VCR/TV] to choose the VCR position. Select either
VCR or DVD mode, then continue with the other features as described in this manual.
After an OTR or a Timer Recording has been set, this unit operates as follows:
• If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape. Press [SUBTITLE/T-SET] on the
remote control or [STOP/EJECT
C
A] on the unit, then press [VCR] to activate the VCR function again.
• Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET] is pressed.
• To cancel the timer standby mode, press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT
C
A] on the unit, then
press [VCR] to activate the VCR function again.
• The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after
you cancelled Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you
operate.
When an OTR or a Timer Recording is completed...
• If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically,
and
indicator on the front panel lights to indicate the unit is in the timer standby mode.
•
indicator on the front panel flashes if there are no more Timer Recordings on standby.
• If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be
unavailable. All the DVD functions are available during OTR, timer standby mode and Timer Recording.
• Press [STOP/EJECT
C
A] on the front panel or [SUBTITLE/T-SET] on the remote control to use the VCR when the unit is
off.
• Press [OUTPUT] on the front panel or [VCR] on the remote control to use the VCR when the unit is on. In case Timer
Recording is in standby mode, press [STOP/EJECT A] on the front panel or [SUBTITLE/T-SET] on the remote control,
C
and then press [OUTPUT] on the front panel or [VCR] on the remote control.
If you want to use the DVD player during a Timer Recording or while indicator on the front panel is on or blinking.
• Press [POWER] to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the other
DVD features as described in this manual.
NOTE (for Timer Recording) :
• If there is a power failure or the unit is unplugged for more than ꢀ0 seconds, clock and all timer settings will be lost.
–
–
1ꢀ
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying a Video Tape
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
(Back of TV)
(Back of another source)
(Back of DVD/VCR*)
DVD/VCR
AUDIO OUT
VCR
2
AUDIO OUT
1
or
ANT-IN
L
Connect
AUDIO IN
VIDEO IN
Connect
R
VIDEO OUT I
VIDEO OUT
ANT-OUT
RF cable
(supplied)
*Front input jacks are also available
Audio/Video cables
(commercially available)
7) To stop recording, press [STOP/EJECT
C
A] on the
1) Insert a pre-recorded tape into another VCR for playing.
recording unit, then stop playback of the tape in another
source.
2) Insert a tape with its record tab into this unit for recording.
ꢀ) Press [SPEED] on the remote control of the recording
unit to select the desired recording speed (SP/SLP).
4) Select the “L1” or “L2” position on the recording unit.
Hint
• For best results during dubbing, use the front panel controls whenever pos-
sible. The remote control might affect another source’s operation.
• To use the input jacks on the back of this unit, select
“L1” position by pressing [0], [0], [1] on the remote
• Always use video-quality shielded cables with RCA-type connectors. Standard
audio cables are not recommended.
control or [CHANNEL
K
/
L]
on this unit.
• To use the input jacks on the front of this unit, select
• You can use a video disc player, satellite receiver or other audio/video
component with Audio / Video outputs.
• “L1” or “L2” is found before the lowest memorized channel. (Example: CH02)
• “L2” input jacks are on the front of this unit.
“L2” position by pressing [0], [0], [2] on the remote
control or [CHANNEL
K/L] on this unit.
5) Press [REC/OTR] on the recording unit.
6) Begin playback of the tape in another source.
–
–
Download from Www.Somanuals.com1. 4All Manuals Search And Download.
EN
DVD Functions
Playback
Before: Turn on the TV, amplifier and any other components which are connected to this unit. Make sure the TV and audio
receiver (commercially available) are set to the correct channel.
2
OPEN/CLOSE
/EJECT
DVD
POWER
SPEED
AUDIO
1
1
OPEN/CLOSE
1
4
7
2
5
8
3
6
9
SKIP/CH.
(
⇒Page 16
)
VCR/TV
SLOW
OUTPUT
POWER
VCR
DVD PROGRESSIVE SCAN
SKIP STOP PLAY
REW
F.FWD STOP/EJECT PLAY
/
REC/OTR
H
G SKIP
CHANNEL
0
VCR
+10
DVD
Insert a disc with
label facing up.
1
3
2
DISPLAY
PAUSE
REV
FWD
OPEN/CLOSE
/EJECT
3
4
Hint
POWER
PLAY
STOP
1
1
4 3
• When you play an MPꢀ/WMA file, details on page 16.
• A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited
4
To start
playback
To stop
playback
by the disc or this unit.
• Some DVDs may be played from title 2 or ꢀ due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st
layer is being switched to the 2nd layer. This is not a malfunction.
STOP
PLAY
TIP:
You can change the on-screen language for DVD function in “PLAYER MENU” setting. (Refer to page 20.)
DVD menu
Fast Forward / Reverse Search
DVD
Some discs contain menus which allow you to customize
DVD playback. Press [K / L / s / B ] to select an item, then
press [ENTER] (or [PLAY B]).
Press [h] or [g] repeatedly during playback
to select the required forward or reverse speed.
To continue playback, press [PLAY B].
To use [SKIP j/REV], [i SKIP/FWD] on this unit
Press and hold to change forward or reverse playback speed.
E
1
Calling up a Menu Screen during Playback
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
To continue playback, press [PLAY B].
Hint
Hint
• Menu operations may vary depending on the disc. Refer to the manual
accompanying the disc for details.
• For DVDs, fast forward or reverse search speed is different depending on the
disc. Approximate speed is 1(x2), 2(x8), ꢀ(x20), 4(x50), 5(x100).
• For Audio CDs and MPꢀ/WMA, approximate speed is 1(x2), 2(x8), ꢀ(xꢀ0).
Resume
DVD
Slow Forward / Reverse
DVD
1
Press [STOP C] during playback.
Press [h] or [g] repeatedly in the pause
mode to select the required forward or reverse speed.
To continue playback, press [PLAY B].
To use [SKIP j/REV], [i SKIP/FWD] on this unit
Press and hold in the pause mode to change forward or
reverse playback speed.
Resume message will appear on
Resume ON
the TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
<Example : DVD>
Hint
To continue playback, press [PLAY B].
• To cancel resume, press [STOP C] one more time in the stop mode.
Hint
• For MPꢀ/WMA, playback will resume from the beginning of the track at which
playback was stopped.
• The resume information stays on even when the power is turned off.
• Slow forward or reverse speed is different depending on the disc. Approximate
speed is 1(1/16), 2(1/8), ꢀ(1/2).
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the slow
playback mode are blurred. (Refer to pages 20-21.)
Paused and Step-by-Step Playback
DVD
Zoom
DVD
Press [PAUSE F] during playback.
1) Press [ZOOM] during playback.
2) Press [ZOOM] repeatedly to select the required zoom
factor: x2, x4 or OFF.
To continue playback, press [PLAY B].
DVD
x2
x4
The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
To continue playback, press [PLAY B].
Hint
ꢀ) Press [K / L / s / B] to slide the zoomed picture across
the screen.
4) To exit zoom mode, press [ZOOM] to select OFF.
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the
pause mode are blurred. (Refer to pages 20-21.)
Hint
To use [SKIP j/REV], [i SKIP/FWD] on this unit
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
Press once to skip a chapter or track to a desired point.
• It may take several seconds to slide the zoomed picture.
–
–
15
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA Playback
MPꢀ/WMA is a method of compressing files. You can copy MPꢀ/WMA files on CD-R/RWs from the computer and play the files on this unit.
DVD
Hint
• Some selections may take a while to be recognized.
• Press [TOP MENU] to return to the first item.
• Folders are known as Groups; files are known as Tracks.
Insert an MPꢀ/WMA-format disc, then the file list will automatically appear
on the TV screen. Press [MENU] when you want to call up the file list
again while MPꢀ/WMA-format disc is already inserted.
3
• Folders and MPꢀ are displayed respectively as
• WMA files are accompanied by icon.
and
.
When selecting the folder:
FILE LIST
FOLDER
MP3
WMA
1
DISC NAME
3
• A maximum of 255 folders or 999 files may be recognized in one disc.
• Up to 8 hierarchies can be recognized in one folder. File in the 9th or deeper
hierarchies cannot be played back.
folder name
folder name
folder name
1
2
3
4
ENTER
folder name
3
or
file name
file name
file name
1
2
3
PLAY
3
ENTER
PLAY
1/
2
folder name
1
This player recommends the files recorded under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz(MPꢀ/WMA)
• Constant bit rate: ꢀ2kbps ~ ꢀ20kbps(MPꢀ). 48kbps ~192kbps(WMA).
• For MPꢀ/WMA file recorded in Variable Bit Rate(VBR), the unit may not display the
actual elapsed time.
• Press [B] when you want to go to the next hierarchy.
• Press [
s] when you want to go back to the previous hierarchy (except
for the top hierarchy).
To cancel MPꢀ/WMA playback, press [STOP C].
• Copyright protected WMA files will not play on this unit.
2
STOP
Refer to “Resume” on page 15.
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
DVD
DVD
Angle icon, appears only in a case
multi-angel is available on the DVD.
DISPLAY
DISPLAY
Current playback status
Current playback status
4/12 0:03:21 - 0:02:15
T
1
2
11/16 0:00:00 - 0:03:30
1
2
3
Remaining time of the current track
Elapsed time of the current track
Remaining time of the current chapter
Elapsed time of the current chapter
TR(Track):
DISPLAY
Current track number / Total tracks
CH(Chapter):
Current chapter number / Total chapters
ALL:
DISPLAY
Current track number / Total tracks
4/12 0:13:45 - 0:45:40
T
Current repeat setting, if active
T: Track repeat
1/3 0:00:00 - 1:23:45
A: All Tracks repeat
B: A-B repeat
Remaining time of the current title
Elapsed time of the current title
A
Remaining time of the entire disc
Elapsed time of the entire disc
TT(Title):
Current title number / Total titles
DISPLAY
DISPLAY
3
Layer numbers, appears only when
playing a two-layered disc.
L0: Layer 0 is playing
T
L1
Hint
• When you are playing a disc in PROGRAM or RANDOM mode,
L1: Layer 1 is playing
2
PROGRAM (or RANDOM) will be displayed instead of
.
Current repeat setting, appears only
when the repeat setting is active.
C: Chapter repeat
DVD
T: Title repeat
B: A-B repeat
DISPLAY
A
Current playback status
BIT RATE: The amount of audio and
video data currently being read
TRACK 01
1
2
DISPLAY
The name of the file currently in play
will be displayed.
DISPLAY
4
TR(Track):
1/36 0:01:15
Current track number / Total tracks
Current repeat setting, if active
T
T: Track repeat
1-A
1-B
will be displayed
NOTE: For WMA files,
after
and
G: Group (folder) repeat
A: Disc repeat
.
1
Elapsed playing time of the current
track
DISPLAY
TITLE NAME
1-A
Title name based on tag information
currently in play will be displayed.
PROGRAM
RANDOM
3
4
or
ARTIST NAME
(Only when you are playing a disc in PROGRAM or RANDOM mode.)
1-B
DISPLAY
Artist name based on tag information
currently in play will be displayed.
–
–
Download from Www.Somanuals.com1. 6All Manuals Search And Download.
EN
Search Functions
SEARCH MODE does not work during Programmed or Random Playback.
Using Track Search
Using Time Search
DVD
DVD
Press [SEARCH MODE].
Press [SEARCH MODE] repeatedly until the Time Search
1
1
2
display appears.
SEARCH
MODE
SEARCH
MODE
/29
TOTAL 1:29:00
PLAY
Select a desired disc time by using the Number buttons within ꢀ0
Select track number by using the Number buttons within ꢀ0 seconds.
2
seconds.
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
TOTAL 1:29:00
/29
9
+10
Hint
• For the disc with less than 10 tracks, press the track number directly.
• For discs with more than 10 but less than 99 tracks, to play single-digit track,
press [0] first, then the track number (e.g. for track ꢀ, press [0], [3]). To play a
double-digit track, press the track number.
• For discs with more than 100 tracks, to play a single or a double-digit track,
press [0] first, then the track number (e.g. for track ꢀ, press [0], [0], [3], and for
track 26, press [0], [2], [6]). To play a triple-digit track, press the track number.
• When there is no need to enter a number, “0” appears automatically.
For example, “0: 0_: _ _” appears in the Time Search display if the total time of
the title or track is less than 10 minutes.
• Press [CLEAR/C.RESET] to erase the incorrect input at step 2.
Marker Setup
Using [SKIP/CH. G/o, H/p]
DVD
Press [SKIP/CH. G/o, H/p] during playback.
1
This feature allows you to assign a specific point on a disc to be
called back later.
Current Track
(TR)
SKIP/CH.
PLAY
To set a marker
TR 1 TR 2 TR ꢀ TR 4
SKIP
SKIP
Press [SEARCH MODE] repeatedly until the marker display
1
appears.
Hint
SEARCH
MODE
• [+10] can also bring the Track search display, except for the disc with less than
10 tracks. For such a disc, track search can be done by just pressing the track
number.
PLAY
Select a marker.
2
Using Title / Chapter Search
or
DVD
Press [ENTER].
3
Press [SEARCH MODE] once for the Chapter Search.
Press [SEARCH MODE] twice for the Title Search.
ENTER
1
SEARCH
MODE
/12
To return to the marker later
PLAY
Press [SEARCH MODE] repeatedly until the marker display
1
appears.
SEARCH
MODE
Select title/chapter number by using the Number buttons
2
within ꢀ0 seconds.
1
4
7
2
5
8
0
3
6
Select the marker.
/12
2
9
or
+10
Press [ENTER] at the desired marker.
3
Using [SKIP/CH. G/o, H/p]
ENTER
Press [SKIP/CH. G/o, H/p] during playback.
1
Current Chapter
(CH)
CH 1 CH 2 CH ꢀ CH 4
To exit the marker screen
SKIP/CH.
PLAY
SKIP
SKIP
RETURN
Press [RETURN ].
or
1
Current Title
(TT)
TT 1 TT2 TTꢀ TT4
Hint
SKIP
SKIP
• The Marker display will disappear in about ꢀ0 seconds when there is no output.
(If the disc has no chapters)
• To clear a marker, select the marker to be cleared at step 2 in the section
“To set a marker” or “To return to the marker later” and then press
[CLEAR/C.RESET].
Hint
• Opening the disc tray or turning off the power will erase all markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To return to the
marker later” will also erase all markers.
• Depending on the disc being played, this function can also be performed by
directly entering the desired chapter number with the Number buttons. Refer
to the manual accompanying the disc.
–
–
17
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat / Random / Programmed Playback
Repeat Playback
Random Playback
DVD
DVD
Repeat function is available only during playback.
This function shuffles the playing order of tracks instead
of playback in the sequence.
Press [REPEAT] during playbck.
1
Press [MODE] twice.
1
RANDOM
REPEAT
CD-DA
TOTAL 0:45:55
PLAY
MODE
RANDOM PROGRAM
--no indication--
STOP
<Example : DVD>
PLAY
Each time you press [REPEAT] repeat function changes as
example below.
<Example : CD>
Press [PLAY B] to start Random Playback.
2
OFF
(repeat off)
CHAPTER (current chapter repeat)
PLAY
TITLE
OFF
(current title repeat)
(repeat off)
Hint
• To repeat the current track in the random selections, press [REPEAT] repeat-
edly until “
TRACK” appears during playback.
• To repeat the entire random selections, press [REPEAT] repeatedly until
“
ALL” appears during playback.
TRACK
ALL
(current track repeat)
(entire disc repeat)
• During random playback, you cannot go back to the previous track.
Programmed Playback
OFF
(repeat off)
DVD
TRACK
GROUP
ALL
(current track repeat)
(current group repeat)
(entire disc repeat)
You may determine the order in which tracks will play.
Press [MODE] once.
1
CD-DA
TOTAL 0:00:00
MODE
STOP
Hint
• Repeat setting will be cleared when moving to another title, chapter, track or
group.
<Example : CD>
Using [K/L] to select desired track.
Press [ENTER].
• Repeat playback are not available with some discs or during repeat A-B play-
back.
2
3
CD-DA
TOTAL 1:03:30
1
5
3:30
5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
2/3
ENTER
or
Repeat A-B Playback
• Up to 99 tracks can be ordered.
DVD
•
If eight or more tracks were in a program, use [SKIP/CH. G///K , H //L]
to see all the tracks.
Repeat function is available only during playback.
• While an MPꢀ/WMA folder is open:
–Press [B] when you want to go to the next hierarchy.
–Press [s] when you want to go back to the previous hierarchy
Press [A-B] at your desired starting point (A).
1
(except for the top hierarchy).
A-
A-B
PLAY
Press [PLAY B] to start Programmed Playback.
PLAY
Press [A-B] at your desired ending point (B).
2
A-B
A-B
Hint
• Press [CLEAR/C.RESET] at step 2 to erase the most recently entered track.
• To erase all programmed tracks at once, select “ALL CLEAR’’ and press
[ENTER] at step 2.
• Point B should be in the same title or track as point A.
• While a program is being played back, [STOP C] works as follows;
Hint
⇒
Press [STOP C] and [PLAY B] next, so that the programmed playback
restarts. (CD playback restarts from the current point. MPꢀ/WMA playback
restarts from the beginning of the current track.)
• To exit the sequence, press [A-B] so that “OFF” appears.
• To cancel point A, press [CLEAR/C.RESET] at step 1.
• This function does not work in the other repeat modes.
⇒
Press [STOP C] twice and [PLAY B] next, so that playback restarts from the
first track in the original order. However, your programmed playback can be
restarted when you follow the above steps. (Your programs are still stored
until either the disc tray is open or power is turned off.)
• To repeat the current track in the program, press [REPEAT] repeatedly until
“
TRACK’’ appears during playback.
• To repeat the entire program, press [REPEAT] repeatedly until “
appears during playback.
ALL’’
–
–
Download from Www.Somanuals.com1. 8All Manuals Search And Download.
EN
Special Settings
Subtitle Language
Camera Angle
DVD
DVD
This unit allows you to select a subtitle language (if available)
during DVD playback.
Some DVD discs may contain scenes which have
been shot simultaneously from various angles.
You can change the camera angle if the angle
icon appears on the screen. If the “ANGLE ICON”
setting is “OFF” in the OTHERS menu, the angle icon will not
appear. (Refer to pages 20-22.)
Press [SUBTITLE/T-SET] during playback.
1
SUBTITLE
1.ENG/6
T-SET
PLAY
Press [ANGLE] during playback.
1 / 8
1
Each time you press [SUBTITLE/T-SET], subtitle language
changes as example below.
ANGLE
PLAY
OFF
ENG
FRE
(no subtitles)
Black Level Setting
(English subtitles)
(French subtitles)
DVD
Adjust the Black Level Setting to make
the dark areas of the TV picture brighter.
Press [MODE] during playback.
1
ON
MODE
To set subtitle ON/OFF
PLAY
Press [SUBTITLE/T-SET] during playback.
1
ENTER
Press [ENTER] to
adjust the black level.
SUBTITLE
T-SET
OFF
2
1.ENG/6
PLAY
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
Press [B] to select subtitle ON or OFF.
2
Press [RETURN
] to exit.
RETURN
3
OFF
Stereo Sound Mode
Hint
DVD
• If your language is not shown after pressing [SUBTITLE/T-SET] several times,
the disc may not have that language. However, some discs allow subtitle lan-
guage setting on the disc menu. (Operation varies depending on the discs, so
refer to the manual along with the disc.)
This unit allows you to select a sound
mode during CD playback.
Press [AUDIO] during CD playback.
1
• When “NOT AVAILABLE” appears on the TV screen, it means no subtitle is
recorded on the scene.
• If you choose a language that has a three- letter-language code, the code will
be displayed every time you change the subtitle language setting. If you choose
any other languages, ‘---’ will be displayed instead. (Refer to page 24.)
• Some discs will only allow you to change the subtitle from the disc menu. Refer
to the manual accompanying the discs for details.
STEREO
AUDIO
PLAY
Each time you press [AUDIO], sound mode changes as example below.
STEREO
(right and left channels are active)
L-ch
(left channel is active)
Audio Language
DVD
R-ch
(right channel is active)
This unit allows you to select an audio language (if multiple
languages are available) during DVD playback.
Virtual Surround
DVD
Press [AUDIO] to change audio language.
1
AUDIO
1.ENG Dolby D 3/2.1ch 48k/3
You can enjoy stereophonic virtual world on your existing 2
channel stereo system.
PLAY
Press [MODE] twice (once for CD and MPꢀ/WMA) during playback.
1
Each time you press [AUDIO], audio language changes as
example below.
OFF
MODE
PLAY
ENG
SPA
FRE
(English audio)
(Spanish audio)
(French audio)
Press [ENTER] for the desired effect.
2
ENTER
1
1: Natural effect
2: Emphasized effect
OFF: No effects (original sound)
RETURN
Press [RETURN
] to exit.
3
Hint
• Some discs will only allow you to change the audio setting from the disc menu.
Refer to the manual accompanying the discs for details.
• When “OFF” appears on the TV screen, it means audio language is not
available.
Hint
For CD play back only
• Virtual Surround will not be effective if the sound mode is set to something
• If your language is not shown after pressing [AUDIO] several times, the disc
may not have that language. However, some discs allow audio language set-
ting on the disc menu. (Operation varies depending on the disc, so refer to the
manual along with the disc.)
other than STEREO. Refer to “Stereo Sound Mode”.
• When playing back 96kHz with Virtual Surround function, the sound will be
down sampling at 48kHz and output as digital audio.
–
–
19
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup
QUICK SETUP Menu
You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.
Press [SETUP] in the stop mode.
Select the desired item.
1
2
SETUP
STOP
or
<SETUP MENU>
Confirm that “QUICK” is selected.
ENTER
QUICK SETUP
QUICK SETUP
A
B
C
P20
P21
P21
Step 5
Step 5
Step 5
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
OFF
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
BITSTREAM
ENTER
ENTER
•
Refer to the sections “PLAYER MENU”, “TV ASPECT”,
“PROGRESSIVE” or “DOLBY DIGITAL” on page 20 or 21.
CUSTOM Menu
You can change the settings of the unit.
QUICK
•
on pages 20-21 indicates DVD Setup menus also accessible from the QUICK SETUP menu.
Press [SETUP] in the stop
Select “CUSTOM”.
Select the desired item.
1
2
3
mode.
ENTER
or
or
SETUP
STOP
<SETUP MENU>
ENTER
LANGUAGE
QUICK SETUP
QUICK SETUP
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
OFF
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
ENGLISH
SUBTITLE
DISC MENU
PLAYER MENU
4:3 LETTER BOX
OFF
BITSTREAM
BITSTREAM
ENTER
DISPLAY menu
PARENTAL menu
OTHERS menu
AUDIO menu
LANGUAGE menu
DISPLAY
AUDIO
OTHERS
LANGUAGE
PASSWORD
Enter current password.
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
OFF
DRC
ON
ANGLE ICON
AUTO POWER OFF ON
ON
SUBTITLE
DISC MENU
PLAYER MENU
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ENTER
ENTER
ENTER
ENTER
ENTER
A
B
C
D
E
page 20
page 21
page 21
page 22
page 22
LANGUAGE Setting
A
Follow steps 1 to ꢀ in the “CUSTOM Menu” section above.
ENTER
ENTER
Select the desired language.
To exit the menu
Select the desired item.
4
5
6
SETUP
or
or
Hint
AUDIO: ∗1 ∗2
(Default: ORIGINAL)
Sets the audio language.
AUDIO
∗1
ORIGINAL
ENGLISH
FRENCH
• Language options are not available with
some discs.
• If OTHER is selected in the AUDIO,
SUBTITLE or DISC MENU screen, press
four-digit number to enter the code for the
desired language. (Refer to the language
code list on page 24.)
• Only the languages supported by the disc
can be selected.
∗2
LANGUAGE menu
SUBTITLE: ∗1 ∗2
(Default: OFF)
Sets the subtitle language.
SUBTITLE
OFF
ENGLISH
FRENCH
LANGUAGE
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
SUBTITLE
DISC MENU
PLAYER MENU
DISC MENU: ∗1
(Default: ENGLISH)
Sets the language in
DVD menu.
DISC MENU
ENGLISH
FRENCH
ENTER
SPANISH
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
• Language setting for Audio and Subtitle are
not available with some discs. Then press
[AUDIO] and [SUBTITLE/T-SET]. Details
are on page 19.
QUICK
PLAYER MENU
:
(Default: ENGLISH)
Sets the language for the
On-Screen Display.
–
–
Download from Www.Somanuals.com2. 0All Manuals Search And Download.
EN
DISPLAY Setting
B
You can change the display functions. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 20.
6 To exit
the TV ASPECT
4
Select the desired item.
5
QUICK
TV ASPECT:
See Hint on the left.
(Default: 4:3 LETTER BOX)
or STILL MODE
Select the
desired
setting.
ENTER
screen
or
TV ASPECT
TV ASPECT
STILL MODE
PROGRESSIVE OFF
4:3 LETTER BOX
AUTO
SETUP
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
ENTER
or
DISPLAY menu
To complete the
PROGRESSIVE
setting
STILL MODE: (Default: AUTO)
See Hint on the right.
STILL MODE
Select the
desired
DISPLAY
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
OFF
ENTER
setting.
ENTER
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
AUTO
FIELD
FRAME
PROGRESSIVE OFF
ENTER
ENTER
or
Hint
Hint
STILL MODE:
QUICK
PROGRESSIVE:
See Hint on the left.
(Default: OFF)
TV ASPECT:
• Select “AUTO” usually.
• If you select “AUTO”,
automatically select the
best resolution setting
(FRAME or FIELD) based
on the data characteristics
of the pictures. (default).
• If you select “FIELD”, the
picture in the still mode will
be stabilized.
• If you select “FRAME”, the
picture in the still mode will
be highly defined.
• An individual picture on TV
screen is called a “frame”,
which consists of two
separate images called a
“field”.
• Select “4:ꢀ LETTER BOX”, so that
black bars may appear on the top
and bottom of the screen.
• Select “4:ꢀ PAN & SCAN” for a
full height picture with both sides
adjusted.
SETUP
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
OFF
4:3 LETTER BOX
AUTO
ON
ENTER
• Select “16:9 WIDE” if a wide screen
TV is connected to this unit.
If there is no picture or
you do not press any
buttons for 15 seconds,
Progressive scan will
switch to “OFF” and it
will exit the setup menu.
Select “Yes”.
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
PROGRESSIVE:
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
• You can set “PROGRESSIVE” to
“OFF” in the DISPLAY menu or
press and hold [PLAY B] on the
front of the unit for more than 5
seconds during playback, so that
the PROGRESSIVE SCAN indicator
on the front panel lights off.
• When “PROGRESSIVE” is “ON”,
video signals from the unit’s VIDEO
OUT and S-VIDEO OUT jacks will
be distorted or not be output at all.
or
Activate Progressive?
NO
YES
SELECT:
K
/
L
SET:ENTER
ENTER
Select “Yes”.
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
•
Some pictures may be
blurred if you select
or
NO
YES
“AUTO” in the still mode due
to their data characteristics.
SET:ENTER
SELECT:
K
/
L
AUDIO Setting
C
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to ꢀ
in the “CUSTOM Menu” section on page 20.
5
4
6To exit the menu
Select the desired item.
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
SETUP
or
DRC
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ON
OFF
ON
BITSTREAM
ENTER
Hint
DRC:
AUDIO menu
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
AUDIO
DRC
DOWN SAMPLING ON
DOLBY DIGITAL
ON
DRC
ON
ON
DOWN SAMPLING:
• When playing disc with
copyright protection, the
sound will be down sampled
at 48kHz, even if you set
to “OFF”.
BITSTREAM
DOWN SAMPLING ON
OFF
ENTER
DOLBY DIGITAL
BITSTREAM
BITSTREAM
ENTER
QUICK
DOLBY DIGITAL:
(Default: BITSTREAM)
•
This function is available
only on digital outputting of
a disc recorded in 96kHz.
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: Outputs a Dolby Digital Signals.
• PCM: Convert the Dolby Digital into PCM (2 channel).
DRC
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ON
ON
ON
PCM
ENTER
–
–
21
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL Setting
D
Parental Control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)
This feature prevents your children from viewing inappropriate materials.
Parental Levels
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.
Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 20.
To exit
the menu
7
4
Enter your desired
four-digit password.
5
Select
“PARENTAL LEVEL”.
6
Select the
desired level.
1
4
7
2
5
8
0
3
6
9
SETUP
ENTER
ENTER
ENTER
or
or
PARENTAL LEVEL
ALL
PARENTAL LEVEL
PASSWORD CHANGE
ALL
8 [ADULT]
7 [NC-17]
6 [R]
PARENTAL menu
CONTROL LEVELS
• ALL:
All parental locks are cancelled.
PASSWORD
• Level 8:
• Levels 7 to 2:
• Level 1:
DVD softwares of any grades (adult/general/children) can be played back.
Only DVD softwares intended for general use and children can be played back.
Only DVD softwares intended for children can be played back, with those intended for
adult and general use prohibited.
ENTER
or
TIPS FOR LEVELS
• 8 [ADULT]:
• 7 [NC-17]:
• 6 [R]:
DVD software of any grades (adult/general/children) can be played back.
No one under 17 admitted
Restricted; under 17 requires accompanying parent or adult guardian
Parental Guidance Recommended
Unsuitable for children under 1ꢀ
Parental Guidance suggested
If you have set a password
already, enter the current
four-digit password.
• 5 [PGR]:
• 4 [PG1ꢀ]:
• ꢀ [PG]:
• 2 [G]:
• 1 [KID SAFE]:
General Audience
Suitable for children
Hint
ENTER
• DVD-Video discs may not respond to the parental lock settings. Make sure this function works with your DVD-Video discs.
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 20.
4
Enter current four-digit
password.
5
Select “PASSWORD
CHANGE”.
6
Enter your new
four-digit password
(except for 47ꢀ7).
7
To exit
the menu
SETUP
ENTER
ENTER
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
or
Hint
• Record the password in
case you forget it.
PARENTAL LEVEL
ALL
PASSWORD CHANGE
PARENTAL menu
• If you forget the password,
press [4], [7], [3], [7] at
step 4, then enter your new
password. Password will
be cleared and parental
levels will be set to “ALL”.
PASSWORD
ENTER
ENTER
OTHERS Setting
E
You can change the other functions. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 20.
To exit the menu
4
5 ANGLE ICON:
6
(Default: ON)
Set to “ON” to show the angle icon when multiple
camera angles are available during DVD playback.
Select the desired item.
SETUP
or
OFF
ON
ANGLE ICON
AUTO POWER OFF ON
ON
ENTER
OTHERS menu
(Default: ON)
AUTO POWER OFF:
Set to “ON” to turn this unit off automatically after ꢀ0 minutes of no use.
OTHERS
ON
ANGLE ICON
ON
OFF
AUTO POWER OFF ON
ANGLE ICON
ON
ENTER
AUTO POWER OFF ON
ENTER
–
–
Download from Www.Somanuals.com2. 2All Manuals Search And Download.
EN
Reset to the Default Setting (Except for PARENTAL Setting)
Press [SETUP] in the
4 To exit the menu
1
2
Select “INITIALIZE”.
3
Select “YES”.
stop mode.
SETUP
SETUP
or
or
STOP
ENTER
ENTER
<SETUP MENU>
Press
twice.
Hint
INITIALIZE
Initialize?
NO
QUICK SETUP
QUICK SETUP
• When you cancel to
initialize at step ꢀ,
select “NO”.
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
OFF
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
OFF
YES
BITSTREAM
BITSTREAM
ENTER
Information
Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.
PROBLEM CORRECTIVE ACTION
No power.
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not
respond to the remote
control.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote control.
• You have to be within 2ꢀ feet (7m) of this unit.
• Check if the right mode is selected. If it’s not in the right mode, press [DVD] or [VCR], whichever you need, on the remote control.
• Check if a cassette tape is in this unit.
• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up, then if you hear some signal sound from the radio
in response to your pressing buttons on the remote control, the remote control is working.
Poor picture or noise.
• Interference signal may be received. Change the position and orientation of the unit.
Timer recording is impos-
sible.
• Make sure the Timer Recording is set correctly.
• Make sure
indicator on the front panel lights up. If not, press [SUBTITLE/T-SET].
• Make sure the VCR clock is set correctly.
Cannot go into record
mode.
• Make sure the tape has a record tab. If needed, cover the hole with adhesive tape.
• Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR OUTPUT light is lit.
Playback picture is partially
noisy.
• Adjust tracking control for a better picture by pressing [CHANNELL/K]] on the unit or [SKIP/CH. G/K, H/L] on the remote control.
Cannot view a tape but
the audio is OK.
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.
• Make sure the VCR is not in the Menu mode.
No or poor, playback
picture.
• Change the RF output channel to CH4. Then select the same channel on the TV.
• Fine tune your TV.
TV programs cannot be
seen normally.
• Re-check the ANT-IN and ANT-OUT connections. See the front page and page 6.
• Press [VCR].
• Press [VCR] on the remote control to activate it in the VCR mode. Check if the VCR OUTPUT light is lit, then set it to the TV position by press-
ing [VCR].
Video or color fades in
and out when making a
copy of a video tape.
• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
Cannot remove the tape.
No picture.
• Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.
• Connect the video cable firmly.
• Insert a correct video disc that plays on this unit.
• Press [DVD] on the remote control. Check if the DVD OUTPUT light is lit. Then try other DVD features.
• Set PROGRESSIVE correctly. Turn it on only if your TV has progressive scan and you are using the Component Video connections between
the unit and the TV. Disable progressive scan for all other connections. (See page 7.)
Disc cannot be played.
• Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
No sound.
• Connect the audio cable firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
Distorted picture.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
• Check if the INTERLACE/PROGRESSIVE mode correctly according to your TV. See pages 20-21.
Audio or subtitle language
does not match the setup.
• The selected language is not available for audio or subtitles on the DVD.
-This is not a malfunction.
The camera angle cannot
be changed.
• The DVD does not contain sequences recorded from different camera angles.
-This is not a malfunction.
Audio or subtitle language
cannot be changed.
• The DVD does not contain audio source or subtitles in the selected language.
-This is not a malfunction.
“Prohibited icon” appears
on the screen, prohibiting
an operation.
• That operation is prohibited by this unit or the disc.
-This is not a malfunction.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
–
–
2ꢀ
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Video Heads :
Four Heads
Output signal format :
NTSC color
Power source :
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption :
21 W (standby: ꢀ.8W)
• Designs and specifications are subject
to change without notice.
• If there is a discrepancy between lan-
guages, the default language will be
English.
Operating temperature :
41°F (5°C) to 104°F (40°C)
Dimensions :
W : 17 ꢀ/16”
H : ꢀ ꢀ/4”
(4ꢀ5mm)
(94mm)
D : 9 ꢀ/16”
(2ꢀꢀmm)
Weight :
Approx 6.0lbs (2.7kg)
Language Code List
Language
Code
Language
French [FRE]
Frisian
Code
Language
Macedonian
Malagasy
Malay
Code
Language
Siswat
Slovak
Slovenian
Somali
Code
A-B
5264
5271
5ꢀ58
5747
5051
5158
5758
5ꢀ60
5ꢀ67
5447
5569
5455
5467
5957
595ꢀ
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6565
6557
6558
6561
5165
6567
6569
6568
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
4748
4747
4752
656ꢀ
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
485ꢀ
5971
4851
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Malayalam
Maltese
Maori
Spanish [SPA]
Sundanese
Swahili
Marathi
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
665ꢀ
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Nepali
Norwegian [NOR]
Hindi
Hungarian [HUN]
Basque
O-R
Bengali;Bangla
Bhutani
Bihari
I-K
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
6149
6164
6159
6247
6265
5247
6258
6266
6ꢀ67
6459
6461
6467
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
5565
5560
5547
5551
5557
5ꢀ47
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
6559
655ꢀ
6547
5ꢀ50
6564
6554
6566
6660
6560
6550
6555
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5861
5847
5868
5860
5866
F-H
Setswana
Shona
Sindhi
Faroese
Fiji
Finnish [FIN]
5261
5256
5255
Singhalese
If you choose a Language that has a ꢀ letter language code, the code will be displayed every time you change the Audio or Subtitle language setting on page 19. If you
choose any other languages, ‘---’ will be displayed instead. (ꢀ letter language code is written in bracket.)
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS
of defect in materials or workmanship as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without
charge for one (1) year from the date of original retail purchase.
Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of
FOR
A
PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY
ninety (90) days from the date of original retail purchase.
FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL
WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY
AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN
THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase
receipt or other proof of original retail purchase will be required together with
the product to obtain service under this warranty.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF,
AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE
CONTACT FUNAI CORP.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are
altered, replaced, defaced, missing or if service was attempted by an unau-
thorized service center. This limited warranty does not apply to any product
not purchased and used in the United States.
ATTENTION:
This product is produced for home use and this warranty only covers failures
due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused
by repairs, alterations or product not supplied by FUNAI CORP., or damage
which results from accident, misuse, abuse, mishandling, misapplication, altera-
tion, faulty installation, improper maintenance, commercial use such as hotel,
rental or office use of this product or damage which results from fire, flood,
lightning or other acts of God.
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF
THIS PRODUCT WITHOUT PRIOR NOTICE.
To locate your nearest AUTHORIZED SERVICE CENTER or for general
service inquiries, please contact us at:
FUNAI CORPORATION
Customer Service
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS,
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
Tel :1-800-968-3429
19900 Van Ness Avenue, Torrance, CA 90501
–
–
Download from Www.Somanuals.com2. 4All Manuals Search And Download.
EN
Español
Conexiones
Consulte la “Basic TV Connection” en la página delantera
antes de utilizar esta unidad.
Pulse [B] para AJUSTE AUTO.
CA 01
3
1
AJUSTE AUTO
Canal de salida RF
Si el canal 3 se está utilizando para una transmisión,
1) Programe su televisor al canal 4.
Conecta el cable de la caja de canales de cable o la caja de satélite en la
toma ANT-IN de la unidad?
2) Inserte una cinta pregrabada en esta unidad.
ꢀ) Pulse [OUTPUT] en la unidad para que se encienda la
luz VCR OUTPUT.
• Si aparece ruido en la pantalla de TV, presione [VCR/TV]
en el mando a distancia.
4) Pulse una vez [PLAY B].
5) Después de unos segundos, pulse [PLAY B] en la uni-
dad durante ꢀ segundos.
• El canal de salida RF cambiará del canal ꢀ al canal 4 y
podrá ver una imagen reproducida.
• Cuando no aparezca una imagen en la pantalla del televi-
sor, repita el paso 4.
SI
NO
Si Pulse [MENU] para salir.
No Espere unos minutos.
Después del escaneo
• El sintonizador se detiene en el canal memorizado más bajo.
• Puede seleccionar sólo los canales memorizados en esta unidad con
[SKIP/CH. G//K, H//L] (o [CHANNEL K // L]).
• Si aparece nuevamente “AJUSTE AUTO” en la pantalla de TV, verifique las
conexiones de cable. Presione nuevamente [B].
Ajuste del reloj
6) Pulse [STOP C] para parar la reproducción.
5
VCR
Instalación de las pilas del control remo-
to
2
- M E N U -
MENU
1
PROGRAMAR
o
1
AUTOREPETIR
AJUSTE CANAL
[OFF]
2
3
B AJUSTE DE RELOJ
SELEC. IDIOMA
• Si no se ha ajustado el reloj, aparece la
pantalla AJUSTE DE RELOJ cuando pulse
[MENU]. En este caso, vaya al paso 2.
Seleccione el mes actual.
AJUSTE DE RELOJ
2
3
4
5
6
7
8
MES
1 0
DIA
– –
AÑO
– – – –
Conmutación VCR/DVD
/
3
HORA MINUTO AM/PM
– – – – – –
o
:
OPEN/CLOSE
OPEN/CLOSE
/EJECT
POWER
SPEED
AUDIO
OUTPUT
VCR
DVD
SKIPH
STOP
PLAY
SKIPG
CHANNEL
1
4
7
2
5
8
3
6
9
SKIP/CH.
REV
FWD
Seleccione el dia actual.
VCR/TV
SLOW
AJUSTE DE RELOJ
MES
1 0
DIA
0 2
AÑO
– – – –
0
VCR
+10
DVD
/
Botón VCR
Botón DVD
DISPLAY
PAUSE
HORA MINUTO AM/PM
– – – – – –
o
PLAY
:
STOP
REC/OTR
MENU
OUTPUT
ENTER
VCR
DVD
SETUP TOP MENU
RETURN
Seleccione el año actual.
SEARCH
MODE
CLEAR/
Luz
DVD OUTPUT
MODE
ZOOM
AJUSTE DE RELOJ
C. RESET
SUBTITLE
T
-SET
ANGLE
REPEAT
A-B
MES
1 0
DIA
0 2
AÑO
2 0 0 6
/
Botón OUTPUT
HORA MINUTO AM/PM
– – – – – –
o
:
Luz
VCR OUTPUT
Seleccione la hora actual.
AJUSTE DE RELOJ
MODO VCR
MES
1 0
DIA
AÑO
Pulse [VCR] en el control remoto. (Compruebe que está encen-
/
0 2 LUN 2 0 0 6
o
dida la luz VCR OUTPUT.)
HORA MINUTO AM/PM
0 5 – – – –
:
MODO DVD
Pulse [DVD] en el control remoto. (Compruebe que está encen-
dida la luz DVD OUTPUT.)
Seleccione los minutos actuales.
AJUSTE DE RELOJ
MES
1 0
DIA
AÑO
/
0 2 LUN 2 0 0 6
Consejo
o
HORA MINUTO AM/PM
0 5 4 0 – –
:
• Si pulsa sólo [OUTPUT] en el panel frontal NO cambía el modo del control
remoto. DEBE seleccionar también el modo correcto en el control remoto.
Seleccione “AM” o “PM”.
AJUSTE DE RELOJ
Activación de la unidad por primera vez
4
MES
1 0
DIA
AÑO
/
0 2 LUN 2 0 0 6
VCR
HORA MINUTO AM/PM
o
0 5
:
4 0
P M AM
BPM
1
2
Encienda el televisor y sintonice al canal ꢀ.
• Si el canal ꢀ se está utilizando para una transmisión, vea la
sección “RF Output Channel”.
Para salir de la pantalla AJUSTE DE RELOJ
LANGUAGE SELECT
POWER
B ENGLISH
FRANCAIS
ESPAÑOL
[ON]
o
–
–
25
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
Español
Modo DVD
Mode de grabadora de video
Reproducción de la
6
Disco/cinta
Botón
(Orden alfavético)
grabadora de vídeo
1
4
7
2
5
8
0
3
6
•Para seleccionar el canal.
•El botón +10 no tiene efecto
en el modo de grabadora de
vídeo.
•Para seleccionar
directamente el capítulo o
el título.
Antes: Encienda el televisor
y cambie al canal ꢀ.
• Si el canal ꢀ se está utilizando para
una transmisión, vea la sección
“RF Output Channel”.
•Para seleccionar directamente la
canción.
9
+10
•Para buscar en avance/
retroceso en un disco.
•
•Para buscar en avance/retroceso en •Para el avance/retroceso de
un disco.
Para empezar la reproducción
en avance/retroceso lento
durante el modo de pausa.
una cinta.
VCR
A-B
•Para repetir entre los puntos •Para repetir entre los puntos A y B
A y B elegidos.
elegidos. (CD)
Para empezar la
reproducción
1
3
2
4
ANGLE
AUDIO
•
Para seleccionar los ángulos
de la cámara en un disco.
•Para seleccionar el idioma
de audio en un disco.
•
•
Para seleccionar ESTÉREO, L-ch o
R-ch. (CD)
PLAY
Para borrar los marcadores. (CD)
•Para retirar el Nº de estado en la
entrada de programa.
•Para borrar los marcadores.
•Para borrar los números
entrados incorrectamente.
•Para borrar el punto para la
repetición A-B.
•Para salir del menú de la
grabadora de vídeo.
•Para reponer el contador de
cinta.
CLEAR/
C. RESET
Para parar la
reproducción
Para expulsar
•Para borrar los números entrados
incorrectamente.
•
OPEN/CLOSE
/EJECT
Para borrar el punto para la repetición A-B. (CD)
DISPLAY
•Para indicar el modo de
disco actual.
•Para indicar la hora actual,
contador de cinta y canal.
STOP
•Para indicar el modo de disco actual.
•Para seleccionar el modo de •Para seleccionar el modo de salida
DVD
salida de DVD.
de DVD.
•Para activar el mando a
distancia en el modo DVD.
•Para activar el mando a distancia en
el modo DVD.
•
•
•
Para seleccionar un
ítem en el menú de la
grabadora de vídeo.
Para avanzar al
siguiente menú de la
grabadora de vídeo.
Para volver un paso
durante el ajuste del
reloj y temporizador.
Reproducción de DVD/
CD
7
ENTER
•Para mover el cursor y
determinar su posición.
•Para mover el cursor y determinar su
posición.
Antes: Encienda el televisor, amplificador y
otros equipos que puedan estar conectados a
esta unidad. Asegúrese que el televisor y el
sintoamplificador de audio (de venta en los
comercios) están en el canal correcto.
MENU
•Para llamar el menu en un
disco.
•Para llamar la lista de archivo.
(MPꢀ/WMA)
•Para llamar el menú de la
grabadora de vídeo.
•Para activar/desactivar el
nivel del negro.
•Para activar/desactivar el
envolvente virtual.
•
Para disponer el orden de reproducción o
la reproducción aleatoria.
MODE
•Para activar/desactivar el envolvente
virtual.
OPEN/CLOSE
/EJECT
DVD
•Para abrir o cerrar la
bandeja del disco.
•Para abrir o cerrar la bandeja del
disco.
•
Para expulsar el videocasete
de la grabadora de vídeo.
•Para hacer una pausa de
reproducción del disco.
•
•
Para hacer una pausa de la
PAUSE
•Para hacer una pausa en la r
reproducción o grabación de la cinta.
Para avanzar la reproducción
un cuadro a la vez.
1
2
•
Para avanzar la reproducción eproducción del disco.
un cuadro a la vez.
OPEN/CLOSE
/EJECT
POWER
•
Para empezar la reproducción •Para empezar la reproducción del
•
Para empezar la reproducción
de la cinta.
PLAY
del disco.
disco.
POWER
•Para encender o apagar la
unidad.
•Para encender o apagar la
unidad.
•Para encender o apagar la unidad.
Ponga un disco con la
etiqueta hacia arriba.
REC/OTR
•
Para empezar una grabaciòn
o una grabaciòn de un toque.
Para parar la
reproducción
Para empezar
la reproducción
3
4
•Para reproducir repetidamente una
canción o disco. (CD)
•Para reproducir repetidamente una
canción, grupo o disco. (MPꢀ/WMA)
REPEAT
•Para reproducir
repetidamente un capítulo
o título.
STOP
PLAY
RETURN
•Para volver a la operación
previa en el menú.
•Para volver a la operación previa en
el menú.
•Para buscar un capítulo,
título u hora.
•Para colocar o buscar los
marcadores.
•Para buscar una canción.
•Para buscar la hora. (CD)
•Para colocar o buscar los
marcadores.(CD)
SEARCH
MODE
•Para llamar el menú de
búsqueda de índice u hora.
Control remoto
8
SETUP
•Para llamar el menú de
programación de DVD.
•Para llamar el menú de programación
de DVD.
OPEN/CLOSE
/EJECT
POWER
SPEED
AUDIO
SKIP/CH.
SKIP/CH.
•Para cambiar de canal.
•Para saltar capítulos o titulo. •Para saltar canciones.
•
Para ajustar manualmente elseguimiento
durante la reproducción.
1
4
7
2
5
8
3
6
9
SKIP/CH.
SLOW
VCR/TV
SLOW
•Para ver la cinta en cámara
lenta.
0
VCR
+10
DVD
SPEED
•Para seleccionar la
velocidad de grabación.
DISPLAY
PAUSE
PLAY
STOP
•Para parar la reproducción o
grabación.
•Para parar la reproducción. •Para parar la reproducción.
STOP
REC/OTR
MENU
•Para poner la grabadora de
vídeo en el modo de espera
para una grabación con
temporizador.
SUBTITLE
T-SET
•Para seleccionar subtítulos
en un disco.
ENTER
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
TOP MENU
•Para volver al archivo superior de la
•Para llamar el menú
jerarquía más alta en el programa y
superior en un disco.
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
en la lista de archivo. (MPꢀ/WMA)
•
•
Para seleccionar el modo de
salida de la grabadora de vídeo.
Para activar el mando a distancia en
el modo de la grabadora de vídeo.
VCR
VCR/TV
•Para seleccionar la posición de
CD/MPꢀ/WMA o la posición del
televisor.
•Para seleccionar la posición
de la grabadora de vídeo o
posición del televisor.
•
Para seleccionar la posición de
DVD o posición del elevisor.
ZOOM
•Para ampliar parte de la
imagen. (x2/x4)
–
–
Download from Www.Somanuals.com2. 6All Manuals Search And Download.
ES
Quick Use Guide
Connections
Please refer to “Basic TV Connection” on the front page
Press [B] to start Auto Set Up.
1
CH 01
3
AUTO SET UP
before you use this unit.
RF Output Channel
If channel 3 has been already occupied for broadcasting,
1) Set your TV to channel 4.
Do you connect the cable from the cable box or the satellite box to the unit’s
ANT-IN jack?
2) Insert a pre-recorded tape into this unit.
ꢀ) Press [OUTPUT] on the unit so that the VCR OUTPUT
light is lit.
YES
NO
Yes Press [MENU] to exit.
•
If noise appears on the TV screen, press [VCR/TV] on the
No Please wait for a few minutes.
After scanning...
• The tuner stops on the lowest memorized channel.
• You can select only the channels memorized in this unit by using
remote control.
4) Press [PLAY B] once.
5) After a few seconds, press and hold [PLAY B] on the
unit for ꢀ seconds.
• The RF output channel will change to channel 4 from
channel ꢀ and you will see a playback picture.
• When a picture does not appear on the TV screen,
repeat step 4.
[SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).
• If “AUTO SET UP” appears on the TV screen again, check the cable
connections. Then, press [B] once again.
6) Press [STOP C] to stop playback.
Clock Set Up
5
VCR
Installing the Batteries for the Remote
Control
2
Press [MENU] and select “CLOCK SET“.
Then press [B] to go to next step.
- M E N U -
TIMER PROGRAMMING
1
1
2
3
AUTO REPEAT
CHANNEL SET UP
B CLOCK SET
[OFF]
LANGUAGE SELECT
MENU
or
• If the clock is not set, the CLOCK SET screen appears when you press
[MENU]. In this case, go to step 2.
VCR/DVD Switching
3
CLOCK SET
Select the current month.
Then press [B] to go to next step.
2
3
MONTH DAY
1 0 – –
YEAR
– – – –
/
OPEN/CLOSE
OPEN/CLOSE
/EJECT
POWER
SPEED
AUDIO
HOUR MINUTE AM/PM
OUTPUT
VCR
DVD PROGRESSIVE SCAN
STOP
– –
:
– –
– –
SKIPH
PLAY
SKIPG
CHANNEL
1
4
7
2
5
8
3
6
9
or
REV
FWD
SKIP/CH.
VCR/TV
SLOW
0
VCR
+10
DVD
VCR button
DISPLAY
PAUSE
CLOCK SET
Select the current day.
Then press [B] to go to next step.
DVD button
MONTH DAY
1 0 0 2
YEAR
– – – –
PLAY
/
STOP
REC/OTR
MENU
OUTPUT
HOUR MINUTE AM/PM
ENTER
or
– –
:
– –
– –
VCR
DVD
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
DVD OUTPUT
light
MODE
ZOOM
C. RESET
SUBTITLE
T
-SET
ANGLE
REPEAT
A-B
CLOCK SET
Select the current year.
Then press [B] to go to next step.
OUTPUT button
4
5
MONTH DAY
1 0 0 2
YEAR
/
2 0 0 6
VCR OUTPUT light
HOUR MINUTE AM/PM
– –
:
– –
– –
or
VCR MODE
Press [VCR] on the remote control.(Verify that the VCR OUTPUT
Select the current hour.
Then press [B] to go to next step.
CLOCK SET
MONTH DAY
1 0
YEAR
light is lit.)
/
0 2 MON 2 0 0 6
DVD MODE
Press [DVD] on the remote control.(Verify that the DVD OUTPUT
light is lit.)
HOUR MINUTE AM/PM
or
0 5
:
– –
– –
CLOCK SET
Select the current minute.
Then press [B] to go to next step.
Hint
6
7
8
MONTH DAY
1 0
YEAR
/
0 2 MON 2 0 0 6
• Pressing only [OUTPUT] on the front panel DOES NOT switch the
mode of the remote control. You MUST select the correct mode on
the remote control.
HOUR MINUTE AM/PM
0 5
:
4 0
– –
or
CLOCK SET
Select “AM” or “PM”.
Turn On the Unit for the First Time
4
MONTH DAY
1 0
YEAR
/
0 2 MON 2 0 0 6
VCR
or
HOUR MINUTE AM/PM
0 5
:
4 0
P M AM
B PM
Turn on the TV and set it to channel ꢀ.
• If channel ꢀ has been already occupied for broadcasting,
1
To exit the CLOCK SET screen
see “RF Output Channel” section.
Select your language in the first time you turn on this unit.
2
LANGUAGE SELECT
Then press [B] to go to next step.
B ENGLISH
FRANCAIS
ESPAÑOL
[ON]
POWER
or
–
–
27
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Use Guide
DVD mode
VCR mode
VCR Playback
6
Disc/Tape
Button
(Alphabetical order)
Before: Turn on the TV and
set it to channel ꢀ.
• If channel ꢀ has been already
occupied for broadcasting, see “RF
Output Channel” section.
1
4
7
2
5
8
0
3
•To select channel.
•The +10 button has no
effect in VCR mode.
6
•To select chapter or title
directly.
•To select track directly.
9
+10
•
•
To search forward/back-
ward through a disc.
To begin slow forward/reverse through a disc.
playback in the pause mode.
VCR
•To search forward/backward
•To forward/backward a
tape.
A-B
Insert a video
To start
playback
2
4
•To repeat between your
chosen point A and B.
•
To repeat between your chosen
point A and B. (CD)
1
3
cassette into this unit.
ANGLE
AUDIO
•To select camera angles
on a disc.
PLAY
•To select audio
•To select STEREO, L-ch or R-ch.
(CD)
languages on a disc.
•
To clear the markers. (CD)
To stop
playback
To eject the
cassette
•To clear the markers.
•To clear the numbers
entered incorrectly.
•To cancel the point for
A-B repeat.
•To remove status number in
program input.
CLEAR/
C. RESET
•To exit the VCR Menu.
•To reset the tape counter.
OPEN/CLOSE
/EJECT
•To clear the numbers entered
incorrectly.
•To cancel the point for A-B
repeat.(CD)
STOP
•To display the current
time, tape counter, and
channel.
DISPLAY
•To display the current
disc mode.
•To display the current disc mode.
DVD/CD Playback
7
•
To select the DVD output
mode.
•
To select the DVD output mode.
DVD
•To activate the remote
control in DVD mode.
Before: Turn on the TV, amplifier and any other
components which are connected to this unit.
Make sure the TV and audio receiver (commer-
cially available) are set to the correct channel.
•To activate the remote
control in DVD mode.
•
•
•
To select an item
on the VCR Menu.
To advance to the
next VCR Menu.
To go back one
step during clock
and timer setting.
ENTER
•To move the cursor and
determine its position.
•To move the cursor and determine
its position.
DVD
MENU
•
To call up the Menu on a
disc.
•To call up the file list. (MPꢀ/WMA) •To call up the VCR Menu.
•To set black level on/off. •To arrange the playing order or
MODE
1
3
2
•To set virtual surround
on/off.
play randomly.
OPEN/CLOSE
/EJECT
•
To set virtual surround on/off.
POWER
OPEN/CLOSE
/EJECT
•To open or close the disc
tray.
•To eject the video
cassette from the VCR.
•To open or close the disc tray.
Insert a disc with
label facing up.
•To pause tape playback
or recording.
•To advance playback one
frame at a time.
•To pause disc playback.
•To advance playback one •To pause disc playback.
frame at a time.
PAUSE
To stop
playback
To start
4
playback
•To begin disc playback.
•To turn the unit on/off.
•To begin disc playback.
•To turn the unit on/off.
•To begin tape playback.
PLAY
POWER
STOP
PLAY
•To turn the unit on/off.
REC/OTR
•To start a recording or
One Touch Recording.
•
•
To play a track or disc repeatedly. (CD)
To play a track, group or disc
repeatedly. (MPꢀ/WMA)
REPEAT
Remote Control
•To play a chapter or title
repeatedly.
8
RETURN
•To return to the previous •To return to the previous operation
operation in menu. in menu.
OPEN/CLOSE
POWER
/EJECT
SPEED
AUDIO
SEARCH
MODE
•To search chapter, title or •To search track.
•To call up the index or
time search menu.
time.
•To search time. (CD)
•To set or search the markers. (CD)
1
4
7
2
5
8
3
6
9
SKIP/CH.
•
To set or search the markers.
SETUP
VCR/TV
SLOW
•To call up the DVD setup
menu.
•To call up the DVD setup menu.
0
VCR
+10
DVD
•To change channels.
•To adjust the tracking
manually during playback.
SKIP/CH.
SKIP/CH.
DISPLAY
PAUSE
•To skip chapters or titles. •To skip tracks.
PLAY
SLOW
• To view the tape in slow
motion.
STOP
REC/OTR
MENU
SPEED
•To select the recording
speed.
ENTER
SETUP TOP MENU
RETURN
•To stop playback or
recording.
STOP
•To stop playback.
•To stop playback.
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
SUBTITLE
T-SET
•To select subtitles on a
disc.
•
To put the VCR into standby
mode for a Timer Recording.
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
•To return to the top file of the
highest hierarchy in the program
and file list. (MPꢀ/WMA)
TOP MENU
•To call up the Top Menu
on a disc.
•
To select the VCR output mode.
VCR
•To activate the remote
control in VCR mode.
VCR/TV
•To select DVD position or •To select CD/MPꢀ/WMA position •To select VCR position or
TV position.
or TV position.
TV position.
ZOOM
•To magnify part of a
picture. (x2/x4)
1VMN22455 / E8A02UD★★★★★
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|