Sylvania Clock Radio SCR1276 User Manual

AM/FM DIGITAL LED CLOCK RADIO  
MODEL SCR1276  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Ventilation - The appliance should be situated so that its location or position does not  
interfere with its proper ventilation. For example, the appliance should not be situated on a  
bed, sofa, rug or similar surface that may block the ventilation openings, or placed in a  
built-in installation, such as a bookcase or cabinet, that may impede the flow of air through  
the ventilation openings.  
8. Heat - The appliance should be situated away from neat sources such as radiators, heat  
registers, stoves, or other appliances (including amplifiers) that produce heat..  
9. Power Sources - The product should be operated only with the type of power supply  
indicated on the marking label. If you are not sure of the type of power supply to your home,  
consult your product dealer or local power company. For products intended to operate from  
battery power, or other sources, refer to the operation instructions.  
10. Grounding Polarization - This product may be equipped with a polarized alternating  
current line plug (a plug having one blade wider than the other). This plug will fit into the  
power outlet only one way this is a safety feature. If you are unable to insert the plug fully  
into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician  
to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.  
11. Power-Cord Protection - Power supply cords should be routed so that they are not likely  
to be walked on or pinched by items placed upon or against them, paying particular  
attention to cords at plugs, convenience receptacles, and the point where they exit from the  
appliance.  
12. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid  
cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
13. Nonuse periods - The power cord of the appliance should be unplugged from the outlet  
when left when left unused for a long period of time.  
14. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are  
not spilled into the product case through product openings.  
15. Damage Requiring Service - Unplug this product from the wall outlet and take it to  
qualified service personnel under the following conditions.  
a) When the power-supply cord or plug is damaged.  
b) If liquid has been spilled into, or objects have fallen into the product.  
c) If the product has been exposed to rain or water.  
d) If the product does not operate when used according to the operating instructions.  
Adjust only those controls that are covered by the operating instructions as an improper  
adjustment of other controls may interfere with the product’s normal operation.  
e) If the product has been dropped or damaged in any way.  
f) When the product exhibits a distinct change in performance-this indicates a need for  
service.  
16. Servicing - The user should not attempt to service the product beyond that described in  
the operating instruction. All servicing should be referred to qualified service personnel.  
17. Power Lines - An outside antenna system should not be located in the vicinity of overhead  
power lines, or other electric light or power circuits, or where it can fall into such power lines  
or circuits. When installing an outside antenna system, extreme care should be taken to  
keep from touching power lines or circuits as contact with them might be fatal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure  
the antenna system is grounded so as to provide some protection against voltage surges  
and built up static. Section 810 of the National Electrical Code ANSI/NEFA 70 provides  
information with respect to proper grounding of the mast and supporting structure,  
grounding conductress, location of antenna-discharge unit, size of grounding electrodes,  
and requirements for the grounding electrode (see figure).  
19. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid  
cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
20. Lightning - For added protection for this product during a lightning storm, or when it is left  
unattended and unused for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent damage to the product due to  
lightning and power-line surges.  
21. Safety Check-Upon completion of any service or repairs to this product, ask the service  
technician to perform safety checks to determine that the product is in proper operation  
condition.  
22. Overloading-Do not overload wall outlets, extension cords, or integral convenience  
receptacles as this can result in a risk of fir or electric shock.  
NEC NATIONAL ELECTRICAL CODE  
Do not apply oil or petroleum products to this product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
Invisible laser radiation will be emitted when the product is  
open and interlocks are defeated. Do not defeat the safety  
interlocks.  
GRAPHIC SYMBOLS WITH SUPPLEMENTARY MARKINGS  
ARE LOCATED ON THE BOTTOM OF THE UNIT.  
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE  
PROCEDURE HEREIN MAY RESULT IN HAZARDOUS  
RADIATION EXPOSURE.  
1. TIME SET BUTTON  
2. HOUR SET BUTTON  
3. MINUTE SET BUTTON  
4. ALARM SET/OFF BUTTON  
5. SLEEP BUTTON  
6. VOLUME/BUZZER SWITCH  
7. AM/FM BAND SELECTOR  
8. TUNING KNOB  
9. SNOOZE BUTTON  
10. RED LED DISPLAY  
11. BATTERY COMPARTMENT  
12. AUTO/OFF/ON SWITCH  
POWER SOURCE  
Plug the AC line cord into AC 120V 60Hz power outlet. The unit is now working and the  
display figures will blink to show you it is operating, but not yet set.  
OPERATING INSTRUCTIONS  
1. AUTO/OFF/ON/SWITCH… slide the switch to turn radio “ON”, “OFF” or to  
“AUTO” position. When the switch is in the “AUTO” position, it will permit  
automatic turning “ON” and “OFF” of the radio according to the sleep and alarm  
settings.  
2. TIME SET BUTTON… press this button simultaneously with the HOUR or  
MINUTE button to set the desired time.  
3. ALARM SET BUTTON… Press this button simultaneously with the HOPUR or  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MINUTE button to set the desired wakeup time.  
4. SLEEP SET BUTTON… Press this button to display the number of minutes (59 or  
less) where the radio will sound for 59 minutes and will automatically turn off after  
then.  
5. HOUR AND MINUTE button… Use these buttons to set the time, while pressing  
the Alarm set button or Sleep button.  
6. AM/FM band selector… Slide this selector to either AM or FM to select the desired  
radio band.  
7. VOLUME KNOB CONTROL… To regulate the loudness of the radio, rotate the  
CONTROL clockwise to desired position. If you wish to be awakened preset time by  
the “Buzzer” rotate the CONTROL counter-clockwise until a “click sound is heard.  
8. TUNING KNOB… Turn this knob to the desired radio station.  
9. SNOOZE BUTTON… When you are awakened by music or buzzer but wish to sleep  
a few to sleep a few minutes more, simply touch the “snooze” button and it will shut  
off the music or buzzer for approximately 5 to 10 minutes before the music or buzzer  
sounds again. This can be repeated several times.  
TO SET THE TIME  
Step 1 Press the Time set button together with the HOUR or MINUTE button to set the  
correct time.  
Note: Repeat the above steps if you run past the correct time.  
A glowing dot appears in the lower left hand corner of the display, indicating that the  
time shown is PM time.  
TO SET THE ALARM  
Step 1 Press the Alarm set button to check the alarm time.  
Step 2 Press the Alarm set button together with the HOUR or MINUTE button to adjust  
the alarm time, paying close attention on the PM indicator.  
NOTE: A glowing dot appears in the lower left hand corner of the display indicating that  
the alarm has been set to operate.  
TO PLAY THE RADIO  
Step 1 Slide the AUTO/OFF/ON switch to the “ON” position.  
Step 2 Slide AM/FM band switch to desired band.  
Step 3 Select the desired radio station by turning the Tuning knob.  
Step 4 Adjust the Volume to the desired listening level.  
TO WAKE TO RADIO  
Step 1 Set the alarm as previously instructed.  
Step 2 Turn the radio on and select the desired radio station  
and volume setting as previously instructed.  
Step 3 Slide the AUTO/OFF/ON switch to “AUTO” position.  
Your units is now set to turn on automatically at the pre-selected  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alarm time.  
TO WAKE TO BUZZER  
Step 1 Follow step 1 to step 3 under “TO WAKE TO RADIO”.  
Step 2 Rotate the VOLUME/BUZZER switch to the “BUZZER”  
position. You will be awakened at the pre-selected alarm time by the buzzer tone.  
To turn the Buzzer off, slide the AUTO/OFF/ON switch to the “OFF”  
position or press ALARM SET/OFF Button.  
ALARM OFF  
Slide the AUTO/OFF/ON switch to “OFF” position if you wish to turn off the radio or  
buzzer after the radio or buzzer has sounded in the Wake to Radio or Wake to Buzzer  
operation. The alarm will not sound again until the next day unless you switch back to  
“AUTO” position or use alarm button to shut off alarm, then the radio or buzzer will  
automatically sound again in 24 hours at the same alarm setting.  
SLEEP CONTROL  
Step 1 Turn the AUTO/OFF/ON switch on the “AUTO” or “OFF” position.  
Step 2 Press the SLEEP button to display the sleep time. The display will indicate 59  
minutes. If you wish the radio to play for a shorter period simply press the SLEEP button  
together with the MINUTE button to set the desired time period, or if you wish to play  
longer, press SLEEP button along with HOUR button top play for 1 hour and 59 minutes  
(MAX).  
Step 3 Press the SLEEP button. The radio will turn on automatically and will turn itself  
off when the pre-set time has passed.  
NOTE: The maximum sleep time is 1 hour and 59 minutes.  
The radio will be switched off automatically when the sleep time expires. To turn the  
radio off before expiration of sleeping time, simply press the “SNOOZE BUTTON”.  
BATTERY BACK-UP  
Your clock has a battery back up feature in case of power failure. A 9 volt battery (not  
included) is required. You must put in a battery to ensure the battery back up feature is  
ready in case of power failure. If power fails, the back up battery will automatically  
continue operation of the clock and maintain actual time. However, the display will not  
be lighted. During actual power failure the alarm function will not be operational. When  
electrical power is restored, the display will light up again and alarm time set previously  
is restored. The battery will maintain timekeeping for approximately 8 hours during  
power failure or interruption.  
NOTE: Remove the battery if the clock is to be unplugged for a long time avoid  
unnecessary battery drain.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Power Source :  
Output Power :  
AC 120V / 60 Hz  
500Mw  
Power Consumption :  
AM 530 – 1700 KHz  
FM 88 – 108 MHz  
0.6” LED Display  
Clock Display :  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Hot Beverage Maker EKJ 17WH User Manual
SonicWALL Sleep Apnea Machine SonicWALL SSL VPN 55 User Manual
Sony Battery Charger NH D100 User Manual
Sony Film Camera UP DF500 User Manual
Sony Laptop PCG F450 User Manual
Spectra Digital Photo Keychain DPF 105 User Manual
Sun Microsystems Network Card 819 1207 11 User Manual
Swann Security Camera StyleCam User Manual
Swann Security Camera SWPRO752CAM User Manual
Tanaka Trimmer THT 232 User Manual