Configuration Guide
®
Adaptive Server Enterprise
15.0
[ UNIX ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
About This Book.......................................................................................................................... vii
CHAPTER 1
Introduction ..................................................................................... 1
dsync option on by default for database device files................. 8
CHAPTER 2
Overview ........................................................................................ 17
Starting servers when the operating system restarts ..................... 20
For HP-UX............................................................................... 21
For IBM RS/6000..................................................................... 21
For Sun Solaris and Linux ....................................................... 22
Starting XP Server after initial installation...................................... 24
Stopping servers ............................................................................ 24
Configuration Guide
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
CHAPTER 3
For Linux ................................................................................. 43
For IBM RS/6000..................................................................... 44
For Sun Solaris and Linux....................................................... 44
CHAPTER 4
CHAPTER 5
Adaptive Server Default Configuration........................................ 47
Default settings .............................................................................. 47
Setting Up Communications Across the Network...................... 49
How Adaptive Server determines which directory service entry to use
iv
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding IPv6................................................................. 63
IPv6 infrastructure ................................................................... 64
CHAPTER 6
Overview ........................................................................................ 69
Enabling LDAP directory services.................................................. 74
CHAPTER 7
Language modules.................................................................. 82
Default character sets for servers ........................................... 83
Supported character sets ........................................................ 84
Character set conversion ............................................................... 89
Conversions between server and client .................................. 89
Sort orders ..................................................................................... 90
Configuration Guide
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Localization .................................................................................... 94
Changing the localization configuration ......................................... 97
CHAPTER 8
Enabling and disabling error logging..................................... 106
Logging auditing events ........................................................ 108
CHAPTER 9
CHAPTER 10
Pre-installation tasks for auditing devices ............................. 115
Installing online help for Transact-SQL syntax............................. 121
Online syntax help: sp_syntax............................................... 121
Default device for the sybsyntax database............................ 122
Installing sybsyntax ............................................................... 122
Index ........................................................................................................................................... 125
vi
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Book
This manual, the Configuration Guide, provides instructions for
performing specific configuration tasks for Sybase® Adaptive Server®
Enterprise on UNIX platforms.
The operating system release levels for the UNIX platforms on which
Adaptive Server is certified to execute is in the installation documentation
or release bulletin for your platform.
This manual covers the following topics:
•
Instructions for reconfiguring certain attributes of your existing
Sybase Adaptive Server Enterprise, Backup Server™, Adaptive
Server Enterprise Monitor™, and XP Server™ to meet your specific
needs.
•
•
•
•
Creating network connections.
Configuring optional functionality.
Performing operating system administration tasks.
Working with system administration issues that are relevant to
Adaptive Server running on UNIX platforms. This manual
supplements the System Administration Guide and the Performance
and Tuning Guide.
Note Before configuring Adaptive Server according to the instructions in
this book, you should have a newly installed or upgraded Adaptive Server
on your system. If you do not, follow the installation and upgrade
instructions in the installation documentation for your platform.
Audience
This manual is for System Administrators or other qualified installers who
are familiar with their system’s environment, networks, disk resources,
and media devices.
How to use this book
This manual contains the following chapters:
•
Chapter 1, “Introduction” is an overview of Adaptive Server and the
configuration changes you might want to make to Adaptive Server
after installing or upgrading the server.
Configuration Guide
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
Chapter 2, “Starting and Stopping Servers” describes how to start and
stop Adaptive Server, Backup Server, Monitor Server, and XP Server.
Chapter 3, “Configuring the Operating System” describes how to set up
your operating system to work with Adaptive Server.
Chapter 5, “Setting Up Communications Across the Network” describes
and clients.
•
•
Chapter 6, “Using the Lightweight Directory Access Protocol as a
Directory Service” provides information about using LDAP directory
services to establish connections.
Chapter 7, “Customizing Localization for Adaptive Server” provides
task information for reconfiguring character sets, sort orders, and language
modules.
•
•
the error logging features of Adaptive Server.
Chapter 9, “Managing Adaptive Server Databases” provides information
about the administration of Adaptive Server databases, including both
routine tasks and performance and tuning considerations.
•
Chapter 10, “Adding Optional Functionality to Adaptive Server”
provides instructions for adding optional functionality, such as auditing
and the sample databases.
The Sybase® Adaptive Server® Enterprise documentation set consists of the
following:
Related documents
•
The release bulletin for your platform – contains last-minute information
that was too late to be included in the books.
A more recent version of the release bulletin may be available on the
World Wide Web. To check for critical product or document information
that was added after the release of the product CD, use the Sybase
Technical Library.
•
The Installation Guide for your platform – describes installation, upgrade,
and configuration procedures for all Adaptive Server and related Sybase
products.
viii
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Book
•
•
•
What’s New in Adaptive Server Enterprise? – describes the new features
in Adaptive Server version 15.0, the system changes added to support
those features, and changes that may affect your existing applications.
ASE Replicator User’s Guide – describes how to use the Adaptive Server
Replicator feature of Adaptive Server to implement basic replication from
a primary server to one or more remote Adaptive Servers.
Component Integration Services User’s Guide – explains how to use the
Adaptive Server Component Integration Services feature to connect
remote Sybase and non-Sybase databases.
•
•
The Configuration Guide for your platform – provides instructions for
performing specific configuration tasks for Adaptive Server.
Full-Text Search Specialty Data Store User’s Guide – describes how to use
the Full-Text Search feature with Verity to search Adaptive Server
Enterprise data.
•
•
Glossary – defines technical terms used in the Adaptive Server
documentation.
Java in Adaptive Server Enterprise – describes how to install and use Java
classes as data types, functions, and stored procedures in the Adaptive
Server database.
•
Messaging Service User’s Guide – describes how to useReal Time
Messaging Services to integrate Java Message Service and IBM
WebSphere MQ messaging services with all Adaptive Server database
applications.
•
•
Monitor User's Guide, Historical Server – describes how to use Historical
Server to obtain performance information for SQL Server® and Adaptive
Server.
Monitor Client Library Programmer’s Guide – describes how to write
Monitor Client Library applications that access Adaptive Server
performance data.
•
•
Monitor Server User’s Guide – describes how to use Monitor Server to
obtain performance statistics from SQL Server and Adaptive Server.
Performance and Tuning Guide – is a series of four books that explains
how to tune Adaptive Server for maximum performance:
•
Basics – the basics for understanding and investigating performance
questions in Adaptive Server.
Configuration Guide
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Locking – describes how the various locking schemas can be used for
improving performance in Adaptive Server.
Optimizer and Abstract Plans – describes how the optimizer
processes queries and how abstract plans can be used to change some
of the optimizer plans.
•
Monitoring and Analyzing – explains how statistics are obtained and
used for monitoring and optimizing performance.
•
•
Quick Reference Guide – provides a comprehensive listing of the names
and syntax for commands, functions, system procedures, extended system
procedures, datatypes, and utilities in a pocket-sized book.
Reference Manual – is a series of four books that contains the following
detailed Transact-SQL® information:
•
Building Blocks – Transact-SQL datatypes, functions, global
variables, expressions, identifiers and wildcards, and reserved words.
•
•
Commands – Transact-SQL commands.
Procedures – Transact-SQL system procedures, catalog stored
procedures, system extended stored procedures, and dbcc stored
procedures.
•
Tables – Transact-SQL system tables and dbcc tables.
•
System Administration Guide – provides in-depth information about
administering servers and databases. This manual includes instructions
and guidelines for managing physical resources, security, user and system
databases, and specifying character conversion, international language,
and sort order settings.
•
•
System Tables Diagram – illustrates system tables and their entity
relationships in a poster format. Available only in print version.
Transact-SQL User’s Guide – documents Transact-SQL, Sybase’s
enhanced version of the relational database language. This manual serves
as a textbook for beginning users of the database management system.
This manual also contains descriptions of the pubs2 and pubs3 sample
databases.
•
Using Adaptive Server Distributed Transaction Management Features –
explains how to configure, use, and troubleshoot Adaptive Server DTM
features in distributed transaction processing environments.
x
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Book
•
•
Using Sybase Failover in a High Availability System – provides
instructions for using Sybase’s Failover to configure an Adaptive Server
as a companion server in a high availability system.
Unified Agent and Agent Management Console – Describes the Unified
Agent, which provides runtime services to manage, monitor and control
distributed Sybase resources.
•
•
•
Utility Guide – documents the Adaptive Server utility programs, such as
isql and bcp, which are executed at the operating system level.
Web Services User’s Guide – explains how to configure, use, and
troubleshoot Web Services for Adaptive Server.
XA Interface Integration Guide for CICS, Encina, and TUXEDO –
provides instructions for using the Sybase DTM XA interface with
X/Open XA transaction managers.
•
XML Services in Adaptive Server Enterprise – describes the Sybase native
XML processor and the Sybase Java-based XML support, introduces
XML in the database, and documents the query and mapping functions
that comprise XML Services.
Other sources of
information
Use the Sybase Getting Started CD, the SyBooks CD, and the Sybase Product
Manuals Web site to learn more about your product:
•
The Getting Started CD contains release bulletins and installation guides
in PDF format, and may also contain other documents or updated
information not included on the SyBooks CD. It is included with your
software. To read or print documents on the Getting Started CD, you need
Adobe Acrobat Reader, which you can download at no charge from the
Adobe Web site using a link provided on the CD.
•
The SyBooks CD contains product manuals and is included with your
software. The Eclipse-based SyBooks browser allows you to access the
manuals in an easy-to-use, HTML-based format.
Some documentation may be provided in PDF format, which you can
access through the PDF directory on the SyBooks CD. To read or print the
PDF files, you need Adobe Acrobat Reader.
Refer to the SyBooks Installation Guide on the Getting Started CD, or the
README.txt file on the SyBooks CD for instructions on installing and
starting SyBooks.
Configuration Guide
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The Sybase Product Manuals Web site is an online version of the SyBooks
CD that you can access using a standard Web browser. In addition to
product manuals, you will find links to EBFs/Maintenance, Technical
Documents, Case Management, Solved Cases, newsgroups, and the
Sybase Developer Network.
To access the Sybase Product Manuals Web site, go to Product Manuals at
Sybasecertifications
on the Web
Technical documentation at the Sybase Web site is updated frequently.
v
Finding the latest information on product certifications
1
Point your Web browser to Technical Documents at
2
3
4
5
Select Products from the navigation bar on the left.
Select a product name from the product list and click Go.
Select the Certification Report filter, specify a time frame, and click Go.
Click a Certification Report title to display the report.
v
Finding the latest information on component certifications
1
2
3
Point your Web browser to Availability and Certification Reports at
Either select the product family and product under Search by Product; or
select the platform and product under Search by Platform.
Select Search to display the availability and certification report for the
selection.
v
Creating a personalized view of the Sybase Web site (including support
pages)
Set up a MySybase profile. MySybase is a free service that allows you to create
a personalized view of Sybase Web pages.
1
Point your Web browser to Technical Documents at
2
Click MySybase and create a MySybase profile.
xii
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Book
Sybase EBFs and
software
maintenance
v
Finding the latest information on EBFs and software maintenance
1
Point your Web browser to the Sybase Support Page at
2
Select EBFs/Maintenance. If prompted, enter your MySybase user name
and password.
3
4
Select a product.
Specify a time frame and click Go. A list of EBF/Maintenance releases is
displayed.
Padlock icons indicate that you do not have download authorization for
certain EBF/Maintenance releases because you are not registered as a
Technical Support Contact. If you have not registered, but have valid
information provided by your Sybase representative or through your
support contract, click Edit Roles to add the “Technical Support Contact”
role to your MySybase profile.
5
Click the Info icon to display the EBF/Maintenance report, or click the
product description to download the software.
Conventions
The following sections describe conventions used in this manual.
SQL is a free-form language. There are no rules about the number of words you
can put on a line or where you must break a line. However, for readability, all
examples and most syntax statements in this manual are formatted so that each
clause of a statement begins on a new line. Clauses that have more than one part
extend to additional lines, which are indented. Complex commands are
formatted using modified Backus Naur Form (BNF) notation.
Table 1 shows the conventions for syntax statements that appear in this manual:
Table 1: Font and syntax conventions for this manual
Element
Example
Command names, procedure names, utility names,
and other keywords display in sans serif font.
select
sp_configure
master database
Database names and datatypes are in sans serif font.
Book names, file names, variables, and path names are System Administration Guide
in italics.
sql.ini file
column_name
$SYBASE/ASE directory
Configuration Guide
xiii
Download from Www.Somanuals.com. All Manuals Search And Download.
Element
Example
select column_name
Variables—or words that stand for values that you fill
in—when they are part of a query or statement, are in
italics in Courier font.
from table_name
where search_conditions
compute row_aggregate (column_name)
Type parentheses as part of the command.
::=
Double colon, equals sign indicates that the syntax is
written in BNF notation. Do not type this symbol.
Indicates “is defined as”.
{cash, check, credit}
[cash | check | credit]
cash, check, credit
Curly braces mean that you must choose at least one
of the enclosed options. Do not type the braces.
Brackets mean that to choose one or more of the
enclosed options is optional. Do not type the brackets.
The comma means you may choose as many of the
options shown as you want. Separate your choices
with commas as part of the command.
cash | check | credit
The pipe or vertical bar( | ) means you may select only
one of the options shown.
buy thing = price [cash | check |
credit]
An ellipsis (...) means that you can repeat the last unit
as many times as you like.
[, thing = price [cash | check |
credit]]...
You must buy at least one thing and give its price. You may
choose a method of payment: one of the items enclosed in
square brackets. You may also choose to buy additional
things: as many of them as you like. For each thing you
buy, give its name, its price, and (optionally) a method of
payment.
•
Syntax statements (displaying the syntax and all options for a command)
appear as follows:
sp_dropdevice [device_name]
For a command with more options:
select column_name
from table_name
where search_conditions
In syntax statements, keywords (commands) are in normal font and
identifiers are in lowercase. Italic font shows user-supplied words.
•
Examples showing the use of Transact-SQL commands are printed like
this:
select * from publishers
xiv
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Book
•
Examples of output from the computer appear as follows:
pub_id pub_name city state
------- --------------------- ----------- -----
0736
0877
1389
New Age Books
Binnet & Hardley
Algodata Infosystems
Boston
Washington
Berkeley
MA
DC
CA
(3 rows affected)
In this manual, most of the examples are in lowercase. However, you can
disregard case when typing Transact-SQL keywords. For example, SELECT,
Select, and select are the same.
Adaptive Server’s sensitivity to the case of database objects, such as table
names, depends on the sort order installed on Adaptive Server. You can change
case sensitivity for single-byte character sets by reconfiguring the Adaptive
Server sort order. For more information, see the System Administration Guide.
Terms
The following terms appear repeatedly throughout this book. For more detailed
information about these and other terms, see the Glossary.
•
•
/work/sybase – is given as an example of the Sybase installation directory.
Text editor – refers to an ASCII text editor or any editor that can save files
to text format.
Accessibility
features
This document is available in an HTML version that is specialized for
accessibility. You can navigate the HTML with an adaptive technology such as
a screen reader, or view it with a screen enlarger.
Adaptive Server Enterprise and the HTML documentation have been tested for
compliance with U.S. government Section 508 Accessibility requirements.
Documents that comply with Section 508 generally also meet non-U.S.
accessibility guidelines, such as the World Wide Web Consortium (W3C)
guidelines for Web sites.
The online help for this product is also provided in HTML, which you can
navigate using a screen reader.
Note You might need to configure your accessibility tool for optimal use.
Some screen readers pronounce text based on its case; for example, they
pronounce ALL UPPERCASE TEXT as initials, and MixedCase Text as
words. You might find it helpful to configure your tool to announce syntax
conventions. Consult the documentation for your tool.
Configuration Guide
xv
Download from Www.Somanuals.com. All Manuals Search And Download.
For information about how Sybase supports accessibility, see Sybase
site includes links to information on Section 508 and W3C standards.
If you need help
Each Sybase installation that has purchased a support contract has one or more
designated people who are authorized to contact Sybase Technical Support. If
you cannot resolve a problem using the manuals or online help, please have the
designated person contact Sybase Technical Support or the Sybase subsidiary
in your area.
xvi
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
1
Introduction
Sybase Adaptive Server Enterprise for UNIX is a full-featured Adaptive
Server that runs on the following platforms:
•
•
•
•
HP-UX
IBM AIX
Sun Solaris
Linux 32-bit
Note The instructions in this book assume that Adaptive Server is
installed and running. For information about installing and starting
Adaptive Server, as well as for an overview of Adaptive Server, see the
Topic
Page
1
About Adaptive Server
System-specific issues
2
System user roles
3
Environment variables
3
Adaptive Server devices and system databases
Client/server communication
Changing Adaptive Server configuration
Languages other than U.S. English
Adaptive Server specifications
5
11
12
13
13
About Adaptive Server
Adaptive Server performs data management and transaction functions,
independent of client applications and user interface functions.
Configuration Guide
1
Download from Www.Somanuals.com. All Manuals Search And Download.
System-specific issues
Adaptive Server also:
•
•
•
•
Manages multiple databases and multiple users
Keeps track of the data’s location on disks
Maintains the mapping of logical data description to physical data storage
Maintains data and procedure caches in memory
Adaptive Server uses these auxiliary programs to perform dedicated tasks:
•
Backup Server manages database load, dump, backup, and restoration
activities.
•
•
Monitor Server keeps track of performance data.
Historical Server obtains performance data from Monitor Server and saves
the data in files for use at a later time.
•
XP Server stores the extended stored procedures (ESPs) that allow
Adaptive Server to run operating-system and user-defined commands.
System-specific issues
Adaptive Server runs on a variety of hardware and operating system platforms.
System-specific issues do not affect the basic functionality of Adaptive Server,
but there are differences among platform implementations. These differences
may include:
•
•
Adaptive Server configuration
Changes to the operating system that enable or enhance Adaptive Server
performance
•
•
•
The structure of entries in the interfaces file
Options for selecting database devices
Operating system commands or utilities that simplify or automate routine
system administration tasks
•
Operating system utilities for monitoring Adaptive Server performance
System-specific issues are described in this document. For more information
about system-specific issues, see the Installation Guide and release bulletin for
your platform.
2
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Introduction
System user roles
The Adaptive Server installation and setup process defines various user roles.
Different user roles have different responsibilities and privileges. These user
roles clarify the way Adaptive Server is to be integrated into your system:
•
Operating system administrator – the individual who maintains the
operating system. This individual has superuser or “root” privileges.
•
System Administrator – the individual in charge of Adaptive Server
system administration, creating user accounts, assigning permissions on
databases, and creating new databases. At installation time, the System
Administrator’s login name is “sa”. The “sa” login is not a UNIX login.
The “sa” login is specific to Adaptive Server and is used to log in to
Adaptive Server using the isql command.
•
“sybase” login – the “sybase” login is a UNIX login that owns all the
Sybase installation directories and files, sets permissions on those
directories and files, and performs the installation and upgrading of
Adaptive Server. This login is preferred, but not required.
Environment variables
It is crucial to the operation of Sybase products that the system environment
variables be set correctly.
Environment variables are set in the user’s environment either interactively or
by including them in the user’s .login and .cshrc files (for C shell) or .profile
file (for Bourne shell). The installation instructions in this guide explain when
to set these variables.
Note As part of the installation, the installer setup these environment variables
in SYBASE.csh and SYBASE.sh files. You can source the file to set their
environment.
•
DSLISTEN – defines the name Adaptive Server uses to listen for client
connections if no name is given during the Adaptive Server start-up. If
DSLISTEN is not set, and no name is given during the Adaptive Server
start-up, the Adaptive Server name defaults to SYBASE.
Configuration Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Environment variables
•
DSQUERY – defines the Adaptive Server name that client programs
attempt to connect to if no Adaptive Server is specified with a command
line option. If DSQUERY is not set, and you do not supply the Adaptive
Server name with a command line option, clients attempt to connect to
SYBASE.
•
•
SYBASE – defines the path of the Sybase installation directory. The
installation program sets up the variable SYBASE to point to the release
directory specified during installation.
SYBASE_ASE – defines the subdirectory of the Adaptive Server
component.
•
•
SYBASE_OCS – defines the subdirectory to which Open Client™ is set.
SYBASE_ FTS – defines the subdirectory for the full-text search
components.
•
•
SYBASE_SYSAM – points to the license-management software
directory.
PATH – specifies directory path to search for executables. The Sybase
executables are located in the installed_components /bin directory. When
using the source files SYBASE.csh or SYBASE.sh, the following paths are
prepended to PATH:
$SYBASE/$SYBASE_ASE/bin:$SYBASE/$SYBASE_OCS/bin
•
LD_LIBRARY_PATH – this variable specifies the directory to search for
shared libraries. The Sybase shared libraries are located in the installed
component’s /lib directory.
When using the source files: SYBASE.csh or SYBASE.sh, the following
paths are prepended to the LD_LIBRARY_PATH environment variable:
$SYBASE/$SYBASE_ASE/lib:$SYBASE/$SYBASE_OCS/
lib:$SYBASE/SYBASE_FTS/lib,etc.
•
•
LIBPATH – on the IBM RS/6000 platform, this variable specifies which
directory to search for libraries.
When using the source files: SYBASE.csh or SYBASE.sh, the following
paths are prepended to the LIBPATH environment variable:
$SYBASE/$SYBASE_ASE/lib:$SYBASE/$SYBASE_OCS/
lib: $SYBASE/SYBASE_FTS/lib, etc.
SHLIB_PATH – on HP-UX platforms, this variable specifies which
directory to search for libraries.
4
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Introduction
When using the source files: SYBASE.csh or SYBASE.sh, the following
paths are prepended to the LIBPATH environment variable:
$SYBASE/$SYBASE_ASE/lib:$SYBASE/$SYBASE_OCS/
lib: $SYBASE/SYBASE_FTS/lib, etc.
Adaptive Server devices and system databases
Devices are files or portions of a disk that are used to store databases and
database objects. You can initialize devices using raw disk partitions or
operating system files.
Adaptive Server requires the following devices:
•
•
•
master – to store system databases.
sybsystemdb – to store information about distributed transaction.
sysprocsdev – to store system procedures.
The master, sybsystemdb, and sysprocsdev devices are created when you
create a new Adaptive Server.
The master device
The master device contains the following databases:
•
master – controls the operation of Adaptive Server as a whole and stores
information about all users, user databases, devices, objects, and system
table entries. The master database is contained entirely on the master
device and cannot be expanded onto any other device.
•
•
model – provides a template for new user databases. The model database
contains required system tables, which are copied into a new user database
with the create database command.
tempdb – the work area for temporary databases in Adaptive Server.
Adaptive Server supports multiple tempdbs. See “create temporary
database” in the T-SQL User’s Guide. Each time Adaptive Server is
started, the tempdb database is cleared and rebuilt from the model
database.
Configuration Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptive Server devices and system databases
•
The sample databases, pubs2 and pubs 3, are stored on the master device
at installation, but should be moved to a user-defined device after
installation.
Note For recovery purposes, Sybase recommends that you do not create
other system or user databases or user objects on the master device.
The sybsystemdb device
For new installations the master device also contains the sybsystemdb
database. The sybsystemdb device stores the sybsystemdb database, which
stores information about transactions in progress, and which is also used during
recovery.
The sybsystemdb database is required to support distributed transaction
management (DTM) features. Before installation, make sure you have enough
space available on the default segment to support sybsystemdb.
The sysprocsdev device
The sybprocsdev devices stores the sybsystemprocs database, which contains
most of the Sybase-supplied system procedures. System procedures are a
collection of SQL statements and flow-of-control statements that perform
system tasks, for example, sp_configure.
The system procedures that are needed during recovery situations are stored in
the master database.
Note sysprocsdev is the default system name for this device. However, it is
frequently referred to as the sybsystemprocs device, since it stores the
sybsystemprocs database.
Optional devices and databases
The devices and databases described in the following sections are optional.
The sample
databases
The sample databases are:
6
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Introduction
•
pubs2 and pubs3 – provided as learning tools for Adaptive Server. pubs2
is used for most of the examples in the Adaptive Server documentation;
other examples use the pubs3 database. Both are available in U.S. English
versions of Adaptive Server.
•
•
interpubs – contains French and German data.
jpubs – contains Japanese data.
For information about installing the sample databases, see the Installation
Guide for your platform, Chapter 3, “Post-Installation Tasks.”
For information about the contents of the sample databases, see the
Transact-SQL User’s Guide.
The sybsecurity
device and database
The sybsecurity device is created as part of the auditing installation process.
The sybsecurity device stores the sybsecurity database and the auditing system
The auditing system records system security information in an Adaptive Server
audit trail. You can use this audit trail to monitor the use of Adaptive Server or
system resources.
For instructions on configuring Adaptive Server for auditing, see Chapter 10,
“Adding Optional Functionality to Adaptive Server.” For information about
installing and using the auditing system, see Chapter 12, “Auditing,” in the
System Administration Guide.
dbccdb database
The database consistency checker (dbcc) provides commands for checking the
logical and physical consistency of a database. The dbccdb database stores the
results of dbcc when dbcc checkstorage or dbcc check verifying is used.
dbcc checkstorage records consistency information for the target database,
operation activity, and the results of the operation in the dbccdb database.
Stored in the database are dbcc stored procedures for creating and maintaining
dbccdb and for generating reports on the results of dbcc checkstorage
operations.
For information on installing and using dbccdb, see Chapter 25, “Checking
Database Consistency,” in the System Administration Guide.
sybmgmtdb database
sybmgmtdb is a Job Scheduler database.
Configuration Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptive Server devices and system databases
All the job, schedule, and scheduled job information, and data needed by the
Job Scheduler task for internal processing is stored in the sybmgmtdb database.
Most access to data in the sybmgmtdb database is via stored procedures. The
stored procedures make the data available to the GUI, the JS Agent and the
command-line interface. Only the Job Scheduler task accesses data directly
from the sybmgmtdb database.
For more information about sybmgmtdb and Job Scheduler, see Job Scheduler
User’s Guide.
dsync option on by default for database device files
The dsync option ensures Adaptive Server can recover data from devices on the
file systems. By default, Adaptive Server enables dsync for file system devices.
However, dsync may cause performance degredation for file system devices
that experience high write activity. The dsync option can be set or reset using
the disk init, disk reinit, and sp_deviceattr commands.
Note The dsync option is ignored for raw devices.
When installing a new Adaptive Server, by default dsync is set on for all file
system devices.
When upgrading from ASE 12.0 or earlier releases on a UNIX server that
stored databases on UNIX file system devices, by default dsync is set:
•
•
on for the master device
off for all other devices
Immediately after upgrade, set the dsync option for the file system devices. See
also sp_deviceattr and sp_helpdevice in the Reference Manual
Warning! Data corruption may occur if dsync option is not set immediately
after upgrade.
8
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Introduction
Determining the location, type, and size of a database device
Adaptive Server requires several database devices. Table 1-1 below shows
baseline values for each of the devices. See the release bulletin for any last
minute changes to these values.
Table 1-1: Adaptive Server database devices
Minimum
size
Minimum
recommended size
Device
Purpose
master
Stores system
databases
24MB for 2K pages 30MB
60MB
45MB for 4K pages
120MB
89MB for 8K pages
240MB
177MB for 16K
pages
sysprocsdev
(also called the
sybsystemprocs
device)
Stores the
sybsystemprocs
120MB
120MB (plus any
space for holding
stored procedures that
you have created)
database
sybsystemdb
Transaction
processing
3MB for 2K pages
6MB for 4K pages
12MB for 8K pages
24MB for 16K pages
5MB
5 – 24MB
sybsecurity (optional)
Required for
auditing
7MB; more for
specialized auditing
For Solaris, HP-UX, IBM AIX, and Linux
For all databases you can use either a raw partition or a file.
Sybase Adaptive Server supports the database devices on NFS- and
CIFS-mounted devices with Network Appliance Filers for storing data.
Network appliance filers provide the same performance and data integrity as
raw devices. There are no changes needed to the operating system or to Sybase
Adaptive Server to use network appliance filers.
NFS mounted devices have been tested on Solaris, HP-UX, IBM AIX, and
Linux.
For All Platforms
You may need to repartition the disk you choose. Contact your operating
system administrator for assistance.
Configuration Guide
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptive Server devices and system databases
When preparing a raw partition device, follow these guidelines:
•
•
•
Do not initialize a database device on the partition that contains your
Sybase installation software. Doing so destroys all existing files on that
partition.
A raw partition designated for use by Sybase cannot be mounted for use
by the operating system for any other purpose, such as for file systems or
swap space.
After a Sybase configuration utility or the disk init command has initialized
a portion of a partition as a database device, the entire partition cannot be
used for any other purpose. Any space left on the partition beyond the size
specified for the device becomes inaccessible, unless you drop and re-
create the device.
•
•
For best performance, place the Sybase software and all disk devices,
including the master device, on the same machine.
To avoid any possibility of using a partition that contains the partition map,
do not use cylinder 0.
v
Choosing a raw partition
1
2
3
Determine which raw partitions are available.
Determine the sizes of the raw partitions.
From the list of available raw partitions, select a raw partition for each
device, based on the size recommendations in Table 1-1 on page 9.
4
5
Verify with the operating System Administrator that the partition you have
chosen is available.
Make sure the “sybase” user has read and write privileges to the raw
partition.
Note For more information on choosing a raw partition, see your
operating system documentation.
10
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Introduction
Client/server communication
Adaptive Server communicates with other Adaptive Servers, Open Server™
applications (such as Backup Server), and client software on your network.
Clients can talk to one or more servers, and servers can communicate with
other servers by remote procedure calls.
For Sybase products to interact with one another, each product needs to know
where the others reside on the network. Names and addresses of every known
server are listed in a directory services file. This information can be stored in a
directory services file two different ways:
•
In an interfaces file, named interfaces on UNIX platforms, located in the
$SYBASE installation directory, or
•
In an LDAP server
After your Adaptive Server or client software is installed, it can connect with
any server on the network that is listed in the directory services.
When you are using a client program, and you want to connect with a particular
server, the client program looks up the server name in the directory services
and connects to that server, as shown in Figure 1-1. You can supply the name
of the server by using the DSQUERY environment variable.
On TCP/IP networks, the port number gives clients a way to identify the
Adaptive Server, Open Server, Backup Server, or Monitor Server to which they
want to connect. It also tells the server where to listen for incoming connection
attempts from clients. The server uses a single port for these two services
(referred to as query service and listener service).
Configuration Guide
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Adaptive Server configuration
Figure 1-1: Communicating with a server using interfaces file
During installation, you use the srvbuild utility to create and configure a new
server. The srvbuild process adds entries to the interfaces file for your new
Adaptive Server, Backup Server, Monitor Server, and XP Server.
For instructions on how to modify existing interfaces file entries using dsedit
and dscp or to create new interfaces file entries for existing servers, Chapter 6,
“Using the Lightweight Directory Access Protocol as a Directory Service.”
Changing Adaptive Server configuration
the configuration of several servers, enter the sp_configure information in a
script. For details on using sp_configure, see the System Administration Guide
and the Reference Manual.
For information about configuring languages, character sets, and sort orders,
see Chapter 7, “Customizing Localization for Adaptive Server.”
For information about configuring Adaptive Server to use high availability
features, see Using Sybase Failover in a High Availability Environment.
For information about configuring Adaptive Server for distributed transaction
management (two-phase commit), see the Using Adaptive Server Distributed
Transaction Management Features.
12
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Introduction
Languages other than U.S. English
If you are running srvbuild in a language other than U.S. English, verify that any
input you provide uses a character set that is supported by the us_english
character set.
Note The us_english character set does not support accent marks, such as
tildes (~) and umlauts (ü). This prevents srvbuild from supporting the character
sets that use these characters.
For more information about languages, character sets, and sort orders, see the
Installation Guide for your platform. For more information on srvbuild, see the
Utility Guide.
Adaptive Server specifications
Database specifications
Databases per Adaptive
Server
A maximum of 32,767
databases per server
Maximum database size
•
•
•
•
2K page server – 4TB
4K page server – 8TB
8K page server – 16TB
16K page server – 32TB
Minimum allowable
124MB
Required for an upgrade
sybsystemprocs database
24
Maximum size of a
database device (disk
partition)
2
If the Operating System supports
file sizes up to 4TB, then Adaptive
Server supports file system devices
up to 4TB
(4TB)
31
Maximum number of
2
database devices per server
Maximum number of
devices or device pieces
per database
Unlimited
31
Limited by available memory
Maximum number of
segments per database
Maximum number of login 2147516416
IDs per server
Configuration Guide
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptive Server specifications
Maximum number of users 2146484223
per database
Maximum number of
groups per database
1032193
Table specifications
User objects per database
Indexes per table
31
2
– 255
250 (one clustered index)
32
Rows per table
Limited by available
storage
Maximum 2
Columns per composite
index
31
Creation of clustered index 1.2*(x + y)
For sorted data, approximately 20
percent of the table size needed
x = total data space in
table,
y = sum of space of all
nonclustered indexes on
table,
and 20 percent overhead
for logging
Maximum size of object
name
255
Query specifications
Maximum number of tables
participating in a query, for a
query without a union, or for
each side of a union in a query
64
Maximum of 50 user tables,
including result tables, tables
referenced by views (the view
itself is not counted) correlations
and self-joins; maximum of 14
worktables
Maximum number of tables in a 256
“union” query
Includes up to 50 user tables and 14
work tables on every side of the
union, for a total of up to 256 tables
across all sides of the union.
Maximum number of databases
participating in one transaction
Unlimited
Includes database where
transaction began, all databases
changed during transaction, and
tempdb, if it is used for results or
worktables
14
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1 Introduction
Practical number of databases
participating in one query
16
Includes each occurrence of each
database queried and tempdb, if it
is used for results or worktables
Maximum number of tables with 192
referential integrity constraints
for a query
Procedure specifications
Number of buffers and
procedure buffers
Configurable
Limited by amount of RAM and
maximum size of shared memory
segment
Minimum memory required per 2K
stored procedure
Maximumnumber of parameters 2048
per stored procedure
Adaptive Server extended-limit capabilities vary by type of table and the
database logical page size. Table 1-2 lists the column and row limits for
allpages-locked (APL) tables.
Table 1-2: Allpages-locked (APL) tables
Maximum APL table
limits
Numberof Column size
Columnsize Columnsize Column size
columns
2K page
1960 bytes
1948 bytes
4K page
4008 bytes
3988 bytes
8K page
8104 bytes
8068 bytes
16K page
16296 bytes
16228 bytes
Fixed-length column
1024
Variable-length column
254
Table 1-3 lists the column and row limits for data-only-locked (DOL) tables.
Table 1-3: Data row and data page tables.
Maximum DOL table
limits
Number of Column size
Columnsize Column size Columnsize
columns
2K page
1958 bytes
1954 bytes
4K page
4006 bytes
4002 bytes
8K page
8102 bytes
8089 bytes
16K page
16294 bytes
16290 bytes
Fixed-length column
1024
Variable-length column
1024
Database space requirements depend upon the logical page size of the server.If
your model database is larger than the minim size listed below, then the
minimum size of the database is equal to the model database. Table 1-4 lists the
minimum size for each database.
Table 1-4: Database requirements for varying page sizes
Databases
2K page
4K page
8K page
16K page
master database
13MB
26MB
52MB
104MB
Configuration Guide
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptive Server specifications
Databases
2K page
4K page
6MB
8K page
12MB
16K page
24MB
model database
tempdb database
sybsystemdb database
3MB
4MB
3MB
6MB
12MB
24MB
6MB
12MB
24MB
Larger logical page sizes can contain more data. Table 1-5 lists the maximum
data for each logical page size.
Table 1-5: Data limits for tables according to page size
Tables
2K page
600
4K page
1250
8K page
2600
16K page
5300
Bytes per index key
User-visible row length
DOL table
1958
4006
8102
16294
User-visible row length
APL table
1960
4008
8104
16296
16
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
2
Starting and Stopping Servers
Server, Monitor Server, and XP Server.
Topic
Page
Overview
17
18
20
24
24
Starting servers
Starting servers when the operating system restarts
Starting XP Server after initial installation
Stopping servers
Overview
The methods described in this chapter are used to start Adaptive Server,
Backup Server, and Monitor Server after a shutdown for database
maintenance, because of an operating system crash, or for other reasons.
XP Server is not started by the installation process. XP Server is started by
Adaptive Server when an XP command is issued through isql.
You can use Sybase Central to start and stop servers manually or
automatically. For more information about Sybase Central, see “Chapter
1, Overview of System Administration,” in the System Administration
Guide.
Requirements for starting servers
To start a server, your user account must have:
•
•
Anyone with access to the database servers (execute privileges) and
database devices (read/write privileges).
Access to Adaptive Server distribution files
Configuration Guide
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting servers
•
•
The system environment variables discussed in Chapter 1, “Introduction”
Access to SySAM licenses. For more information, see the Sybase Software
Asset Management User’s Guide.
The installation program creates the interfaces file and system environment
variables when you install servers on your computer.
Starting servers
You can start Adaptive Server, Backup Server, or Monitor Server from the
command line by using RUN_server_name files and startserver commands.
You can customize the starting options.
You can also customize the start up options by editing the RUN_server_name.
Server start-up parameters
The default start-up parameters are stored under
$SYBASE/$SYBASE_ASE/install/RUN_server_name, where server_name is
the name of the server you installed.
Backup Server, Monitor Server, and Historical Server server names are
appended with “_back”, “_mon”, and “_hs”, respectively.
Table 2-1 lists the default start-up parameters for Adaptive Server.
Table 2-1: Default Adaptive Server start-up parameters
Switch
Description
-d $SYBASE/data/master.dat
Location of the master device file
Name of the Adaptive Server
Location and name of the error log file
-s server_name
-e $SYBASE/$SYBASE_ASE
/install/errorlog
-M $SYBASE/$SYBASE_ASE
Directory that stores shared memory files
Location and name of license cache file.
-N$SYBASE/$SYBASE_ASE/sysam/
<srv_name>.properties
18
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Starting and Stopping Servers
Changing start-up parameters
You cannot change any of these default start-up parameters unless you directly
edit the $SYBASE/$SYBASE_ASE/install/RUN_ server_name file. You can
also specify additional start-up parameters within the
$SYBASE/$SYBASE_ASE/install/RUN_ server_name file.
Additional start-up parameters include any valid server command line options
listed for the databaserver and backupserver descriptions in the Utility Guide.
For a description of start-up parameters for Monitor Server and Historical
Server, see the Adaptive Server Enterprise Monitor documentation.
Using a RUN_server_name file
Each time a new Adaptive Server, Backup Server, or Monitor Server is created,
the srvbuild program creates a RUN_server_name file that contains the
information required to restart that server. RUN_server_name files are created
in the $SYBASE/$SYBASE_ASE/install directory. For Adaptive Server, the
RUN_server_name file is named RUN_server_name, where servername is the
name of the server.
For example, the RUN_server_name file name for an Adaptive Server named
TEST is RUN_TEST.
For Backup Server and Monitor Server, the RUN_server_name files are named
RUN_servername_back and RUN_servername_mon, respectively, where
servername is the name of the server.
Warning! Do not delete the RUN_server_name file that is created in
$SYBASE/$SYBASE_ASE/install. This file is used to restart servers when you
customize your installation. If you need the RUN_server_name file in another
location, make a copy of the original RUN_server_name file in the new
location.
The RUN_server_name file for a server named SYBASE is named
RUN_SYBASE. If the RUN_server_name file for your current Adaptive Server
is named RUN_server_name, you must change the name to RUN_SYBASE
during the upgrade process.
Configuration Guide
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting servers when the operating system restarts
Using the startserver command
To start a server from the command line, enter:
$SYBASE/$SYBASE_ASE/install/startserver [ -f RUN_server_name file ]
where $SYBASE/$SYBASE_ASE/install/startserver is the full path name of the
startserver utility, and RUN_server_name file is the full path name of the
RUN_server_name file (usually
$SYBASE/$SYBASE_ASE/install/RUN_server_name).
If your Adaptive Server is named SYBASE, the RUN_server_name file
specification is optional.
You must have read and write permissions on the master device for an Adaptive
Server to start it with startserver. For more information about startserver, see
the Adaptive Server Utility Guide.
Using the monserver and backupserver commands
Use the monserver command to start Monitor Server from the UNIX command
line. For details, see the Adaptive Server Enterprise Monitor Server User’s
Guide.
Starting servers when the operating system restarts
This section describes how to configure your operating system for automatic
restart of Adaptive Server and Backup Server.
On production systems, Adaptive Server, Backup Server, and Monitor Server
should restart automatically when the UNIX operating system starts. This is
accomplished by making an entry for the server in the operating system start-
up script. Monitor Server must be listed after Adaptive Server in the start-up
script.
For more information on starting Monitor Server at operating system restart,
see the Monitor Server User’s Guide.
Note The startup script must set up all the required Sybase environment
variables, or source SYBASE.csh or SYBASE.sh, before starting the server.
20
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Starting and Stopping Servers
For HP-UX
In HP-UX versions 10.0 and later, you cannot edit commands in the /etc/rc file,
so the System Administrator must create a script that executes when the
operating system starts or shuts down.
For more information about rc (1M), see the HP-UX manual page. You can
model your script after the HP-UX template file /sbin/init.d/template.
After creating the start-up and shutdown script, place it in the directory
/sbin/init.d. Execution scripts placed in this directory have symbolic links to
directories /sbin/rcn.d where n is the system run level. The linked scripts in
/sbin/rcn.d are used to control the sequencing order of the execution scripts.
For IBM RS/6000
On production systems, you can restart Adaptive Server automatically
whenever the UNIX operating system restarts. To have Adaptive Server restart
automatically, place the startserver command in the /etc/inittab file.
Here is a suggested format for an Adaptive Server start-up command to add to
/etc/inittab:
"sybase:2:wait:/release_directory/install/startserver -f \ RUN_servername
/dev/console 2>&1"
Where release_directory is the full path to the Sybase installation directory
(specified as the SYBASE environment variable), and RUN_servername is the
RUN_server_name file for the server you are starting.
Make sure that the entry for starting Adaptive Server follows any entry for
/etc/rc.tcpip and /etc/rc.nfs in the /etc/inittab file. All network resources must
be available before you start Adaptive Server; otherwise, Adaptive Server does
not start. Also, your server does not start if the network is not running.
Slow start-up of network operations can also prevent Adaptive Server from
starting, even when the commands in the /etc/rc.tcpip file are in the correct
order. You can designate a period of time for Adaptive Server to wait before
starting by inserting a sleep command before the server start-up command in
the RUN_server_name file. The sleep command is in the form:
Configuration Guide
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting servers when the operating system restarts
sleep seconds_of_rest
Note To enable restart of a Backup Server when the operating system starts,
add a Backup Server start-up command to /etc/inittab. Use the path of the
Backup Server RUN_server_name file in this command.
For Sun Solaris and Linux
Before you set Adaptive Server or Backup Server to start automatically, make
sure that all network resources are available. Your server does not start if the
network is not running. Be sure that the entry for restarting the server follows
any commands in the rc directory for starting network operations. Slow start-
up of network operations may prevent servers from starting, even if commands
are in the correct order in the rc directory. You may want to designate a period
of time for your server to wait before starting by inserting a sleep command at
the beginning of the linked RUN_server_name file you created.
To configure your operating system for automatic restart of Adaptive Server
and Backup Server:
1
Create a start-up script file with contents like the following:
$SYBASE/$SYBASE_ASE/install/startserver
-f
$SYBASE/$SYBASE_ASE/install/RUN_servername
where $SYBASE/$SYBASE_ASE/install/startserver is the full path name
of the startserver utility, and
$SYBASE/$SYBASE_ASE/install/RUN_servername is the full path name
of the RUN_server_name file for the server.
2
3
Copy the script to the /etc/init.d directory, using syntax like the following:
cp script_name /etc/init.d/script_name
Review the contents of the /etc/inittab file to determine the default run
level for your operating system. The initdefault entry specifies the default
run level, which is usually 2 or 3 for Sun Solaris and 5 for Linux
4
Use the ln command to create a hard link from the RUN_server_name file
to the appropriate run control (rc) directory, rc#, where # is the default run
level obtained in step 2.
Use syntax like the following for Sun Solaris:
22
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Starting and Stopping Servers
ln /etc/init.d/script_name
/etc/rc#.d/S##script_name
For Linux:
Use ln -s to create symbolic links from the script name to the appropriate
run control (rc) directory, rc# where # is the run level. Use syntax like the
following:
ln -s /etc/init.d/script_name
/etc/rc#.d/S##script_name
When you type the command to create this link, add an uppercase “S” and
a two-digit sequence number preceding the name of the script file. “S”
indicates a start-up file. The sequence number is necessary because files in
the rc directory are executed in order of their numbers. This file should be
executed last, so you should use a sequence number that follows all
existing numbers in ASCII order.
You can perform an ls command on the rc directory to view existing
sequence numbers. For example:
ls /etc/rc3.d/S*
returns:
/etc/rc3.d/S10syslog
/etc/rc3.d/S15nfs.server
/etc/rc3.d/S21rfs
If your script is named sybstart, type the following:
ln /etc/init.d/sybstart /etc/rc3.d/S77sybstart
In this example, you can use any number greater than 27 in place of 77.
For Linux:
You can perform an ls command on the rc directory to view existing sequence
numbers. For example:
ls /etc rc5.d/S*
returns:
/etc/rc5.d/S12syslog
/etc/rc5.d/S14nfslock
/etc/rc5.d/S27ypbind
and so on. If your script is named sybstart, type the following:
ln -s /etc/init.d/sybstart
/etc/rc5.d/S99sybstart
In this example, you can use any number greater than 27 in place of 99.
Configuration Guide
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting XP Server after initial installation
Starting XP Server after initial installation
If you install Adaptive Server and XP Server in the same build session, srvbuild
automatically adds information about the XP Server to the sysservers table of
Adaptive Server. If you install XP Server in a different build session than the
Adaptive Server installation, you are prompted during the XP Server
installation process to supply the name of the related Adaptive Server and the
System Administrator’s name and password. This information is required by
Adaptive Server to start XP Server.
If you do not supply this information during the installation process, XP Server
cannot run. When you execute an extended stored procedure (ESP), you see an
error message similar to the following:
Msg 11018, Level 16, State 1:
Procedure 'xp_cmdshell', Line 2
XP Server must be up for ESP to execute.
To add this required information to the sysservers table manually, enter:
sp_addserver servername_XP, NULL, servername_XP
where servername is the name of the Adaptive Server.
Stopping servers
Only the System Administrator has permission to issue a shutdown command.
Using a shutdown command minimizes the amount of work that automatic
recovery needs to do when the servers are restarted.
The preferred method of stopping Adaptive Server or Backup Server is to use
the Transact-SQL shutdown command. For Monitor Server, use the
sms_shutdown command.
Stopping Adaptive Server
To shut down Adaptive Server:
1
Use isql to log in to an Adaptive Server account with System
Administrator privileges:
isql -Usa -Ppassword -Sserver_name
24
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Starting and Stopping Servers
2
Enter:
1> shutdown
2> go
The default for shutdown uses the with wait option, which allows Adaptive
Server to finish executing SQL statements or procedures, perform a checkpoint
in each database, disable new logins, and perform other shutdown tasks.
Issuing the shutdown command prints a message like this to the sterr file:
Server SHUTDOWN by request.The SQL Server is terminating
this process.
CT-LIBRARY error:
This is normal behavior. If the message indicates that Adaptive Server is
waiting for processes to complete, and you must stop Adaptive Server
immediately, you can use shutdown with nowait which neither waist for
currently executing statements to finish, nor performs checkpoints in every
database.
Note Using the shutdown with nowait command is not recommended; use it
only when necessary.
Stopping Backup Server
To shut down a Backup Server:
1
2
Use isql to log in to a server with System Administrator privileges.
Enter:
1> shutdown SYB_BACKUP
2> go
After you shut down a Backup Server, you must wait at least 30 seconds before
restarting it.
Issuing the shutdown command prints a message similar to the following to the
stderr file:
Backup Server: 3.48.1.1: The Backup Server will go down
immediately.
Terminating sessions.
Configuration Guide
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Stopping servers
This is normal behavior. If a message indicates that Adaptive Server or Backup
Server is waiting for processes to complete, and you must stop Adaptive Server
or Backup Server immediately, use shutdown with nowait, which neither waits
for currently executing statements to finish, nor performs checkpoints in every
database.
Using shutdown with nowait for Backup Server can cause inconsistent or
incomplete dumps and loads. Use this command only when necessary.
For more information on the shutdown command, see the Reference Manual.
Stopping Monitor Server
To release resources, you must shut down Monitor Server before you restart
Adaptive Server. If Adaptive Server stops, make sure that Monitor Server is
shut down before you restart Adaptive Server. Otherwise, Adaptive Server may
not be able to allocate enough resources to restart.
If the Monitor Server heartbeat feature is in effect, Monitor Server
automatically detects the termination of Adaptive Server within the specified
period and shuts itself down. Therefore, before attempting to restart Adaptive
Server after a shutdown, either wait for the automatic shutdown of Monitor
Server to occur, or explicitly stop Monitor Server.
For more information on stopping Monitor Server, see the Monitor Server
User’s Guide.
Using the kill command
Warning! Use the kill command to stop Adaptive Server and Backup Server
only as a last resort.
When possible, use the Transact-SQL shutdown or shutdown with nowait
command. Do not use kill with the -9 flag, because it exits the server without
running a checkpoint to ensure that all database changes are written to the
database device. Adaptive Server may also exit without removing associated
shared memory files and network handlers.
Because Adaptive Server and Backup Server are background processes, they
can be killed from the operating system by their owner or by “root” with the
UNIX kill command. The syntax is:
26
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2 Starting and Stopping Servers
kill pid
where pid is the process identification of any dataserver or backupserver
process, as determined by the showserver command. Killing one engine for a
particular Adaptive Server kills all engines for that server.
If more than one Adaptive Server is running on the same system, be careful that
the engine you kill is associated with the correct Adaptive Server. If your
Adaptive Server is configured to use multiple engines (CPUs), each engine has
an associated operating system process. The correct way to kill a multi-engine
server is to specify the process ID for engine 0.
This showserveroutput shows the processes for a four-engine server:
showserver
UID PID PPID C STIME
TTY
TIME
COMD
jorge 3320 1 80 10:31:40 pts/4 302:15 dataserver -dteamster
jorge 3321 3320 80 10:31:45 pts/4 324:47 dataserver -ONLINE:1
jorge 3322 3320 80 10:31:45 pts/4 326:02 dataserver -ONLINE:2
jorge 3323 3320 80 10:31:45 pts/4 328:56 dataserver -ONLINE:3
This example shows four running dataserver processes with operating system
process identifications (PID) 3320, 3321, 3322, and 3323 (dataserver is the
executable form of the Adaptive Server program.)
Child engine processes for the dataserver have the -ONLINE: argument.
Each child engine has a parent process identification (PPID) that is equal to the
process identification (PID) of the parent. In the example above, the PID of the
parent server is 3320. The other three engines spawned by the parent process
have the same PPID.
If the PPIDs appear to be unrelated, and there is more than one dataserver
process, then more than one Adaptive Server is running on the system.
Shutdown and shared memory files
When Adaptive Server starts, it creates SERVER_NAME.krg file in
$SYBASE/$SYBASE_ASE directory to store information about shared memory
segments that it uses.
Configuration Guide
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Stopping servers
If Adaptive Server is configured with a memory size that is greater than the
MAXSHMSEGSIZE parameter in the operating system then Adaptive Server
may create additional shared memory segments and for every additional shared
memory segment that it creates, an additional file with
SERVER_NAME.srg[N] (where N ranges from 0 – N), is created under
$SYBASE/$SYBASE_ASE.
When Adaptive Server is shut down in a normal manner, the shared memory
files are automatically removed. If Adaptive Server crashes or is stopped with
the kill -9 command, these files are not deleted. You need read and write
permissions on these files to restart Adaptive Server after a crash or a kill -9
command, because Adaptive Server must be able to overwrite the previously
created shared memory files.
If Adaptive Server or Backup Server is killed abnormally it also leaves shared
memory segments. Use the ipcs and ipcrm commands to identify and remove
these shared memory segments that have “NATTACH” count as “0”.
See the UNIX man pages for more information about ipcs and ipcrm.
28
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
3
Configuring the Operating
System
Topic
Page
29
Setting environment variables
Configuring new servers with srvbuild
Using the stty setting
30
33
Restoring correct permissions
File descriptors and user connections
Enabling asynchronous disk I/O
Adjusting the client connection timeout period
Checking for hardware errors
34
34
38
41
42
Monitoring the use of operating system resources
A sample C shell maintenance script
43
45
Setting environment variables
Note As part of the installation, the installer creates SYBASE.sh and
SYBASE.csh files in $SYBASE directory for user to source to setup all the
environment variables.
It is crucial to the operation of Sybase products that the system
environment variables be set correctly. Environment variables are set in
the user’s environment either interactively or by including them in the
user’s .login and .cshrc files (for C shell) or .profile file (for Bourne shell).
Only the file owner or the “root” user can edit a user’s .login, .cshrc, or
.profile file.
Configuration Guide
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring new servers with srvbuild
You may want to verify that the Adaptive Server environment variables in
Table 3-1 are set correctly.
To check the current value of environment variables, enter the following
command at the operating system prompt:
env
Table 3-1 describes the system environment variables for Adaptive Server.
Table 3-1: System environment variables
Variable
Sample value
Function
DSLISTEN
TEST
Used at Adaptive Server start-up; enables the
specified Adaptive Server to listen for input
from front-end software.
DSQUERY
PATH
TEST
Defines the Adaptive Server to which local
client applications connect.
/usr/bin:/etc:
/usr/sbin:
Appends the full path to the Adaptive Server
bin subdirectories.
/usr/ucb:
/usr/bin/X11:/sbin
Configuring new servers with srvbuild
To configure new servers with srvbuild:
1
Source SYBASE.csh or SYBASE.sh file in $SYBASE to setup the
environment variables.
2
3
Run $SYBASE/$SYBASE_ASE/bin/srvbuild.
The Select Servers to Build window displays. Choose the servers you want
to configure by clicking the boxes on the left. When you select each of the
boxes, the server name text field is enabled where you can enter the server
name.
Note The list of “Server type” available for you to choose depends on
what you have installed in $SYBASE.
4
When you have selected the servers you want to build, click OK The next
screen or screens displays information depending on what you chose to
configure.
30
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3 Configuring the Operating System
5
In the Adaptive Server type screen, select the:
•
•
•
•
•
•
•
•
•
•
•
Server page size
Master device path
Master device size
Master database size
Sybsystemprocs device path
Sybsystemprocs device size
Sybsystemprocs database size
Error log
Transport type
Host name
Port number
In the Edit Advance Adaptive Server Attributes tab, enter:
•
•
•
•
•
•
Adaptive Server configuration file
Sybsystemdb device path
Sybsystemdb device size
Sybsystemdb database size
Share memory file directory
Default backup server
6
To configure Backup Server, in the Backup Server configuration screen,
select the:
•
•
•
•
•
•
•
•
Error log
Tape configuration file
Language
Character set
Maximum number of network connections
Maximum number of server connections
Transport type
Host name
Configuration Guide
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring new servers with srvbuild
•
Port number
7
To configure Monitor Server, select the following information in the
Monitor Server screen:
•
•
•
•
•
•
•
Maximum number of connections
Error log
Configuration file
Shared memory directory
Transport type
Host name
Port number
8
9
In the XP Server type screen, select:
•
•
•
Transport type
Host name
Port number
In the Full-Text Search SDS type screen, select:
•
•
•
•
•
•
•
•
•
•
Error log
Collection directory
Default database
Language
Character set
Minimum number of sessions
Maximum number of sessions
Transport type
Host name
Port number
10 To configure Job Scheduler, enter the following information in the Job
Scheduler type screen”
•
•
Sybmgmtdb device path
Sybmgmtdb device size
32
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3 Configuring the Operating System
•
•
•
•
Sybmgmtdb database size
Transport type
Host name
Port number
11 In the “Configure Self Management...” screen, you can enter:
•
•
•
Enable Self Management
Self Management user name
Self Management user password
If you change the Self Management user password after configuring the
Self Management, you need to rerun:
sp_addexternlogin loopback, <Self Management user
name>, <Self Management user name>, <new Self
Management user password>
12 Click Build Servers! to proceed with the servers configuration. srvbuild
displays the configuration status as it builds the servers you selected.
13 After the server configuration completes, click Exit to quit srvbuild.
Using the stty setting
Setting the stty tostop option causes a background Adaptive Server to stop as
soon as it tries to write to the terminal. To avoid this error, execute the
following command before starting Adaptive Server:
stty -tostop
If you are redirecting all Adaptive Server output to files, you do not have to
change the stty setting.
Configuration Guide
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Restoring correct permissions
Restoring correct permissions
Sybase software files and directories are installed with the correct access
permissions. If you notice that the permissions are no longer correct, you can
restore the correct permissions with the script setperm_all, located in the
$SYBASE/$SYBASE_ASE/install directory.
File descriptors and user connections
The number of user connections used by Adaptive Server cannot exceed the
number of file descriptors available to Adaptive Server on the operating
system. When configuring user connections on Adaptive Server, the System
Administrator should take into account the number of file descriptors available
per process. Although most of the open file descriptors are available for user
connections, a few are used by Adaptive Server for opening files and devices.
For HP-UX
The kernel parameters maxfiles and maxfiles_lim control the number of file
descriptors available to any one process. The limit is 10,000 for HP-UX on a
32-bit system, and 60,000 on a 64-bit system.
To obtain the current values on the file descriptors use the Korn or Bourne shell
ulimit command: ulimit -n
For AIX
The number of file descriptors per process is determined by the operating
system parameter open_max. The default value of open_max is 32767.
Adaptive Server can use a maximum of 2000 file descriptors per engine,
regardless of the value of open_max. For more information on setting
open_max, see the AIX operating system documentation.
To obtain the current value of the open_max parameter, use the Korn or Bourne
shell ulimit command:
ulimit -n
34
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3 Configuring the Operating System
For Linux
The number of file descriptors per process is limited to 10,000. You can set the
number of file descriptors using ulimit.
For Sun Solaris
For Sun Solaris, you can set both soft and hard limits for file descriptors. The
soft limit can be increased up to the hard limit by the user, but the hard limit
can be increased only by someone with “root” permissions. The soft limit
determines the number of open file descriptors available to an Adaptive Server
engine. The limit is 10,000.
Although most of the open file descriptors are available for user connections,
a few are used by Adaptive Server engines for opening files and devices.
See the System Administration Guide for additional information on user
connections.
Displaying current soft and hard limits
To display the current soft limit, for C shells, enter:
limit descriptors
For Bourne shells, enter:
ulimit -n
To display the current hard limit for C shells, enter:
limit -h descriptors
For Bourne shells, enter:
ulimit -Hn
Increasing the soft limit
To increase the soft limit for C shells, enter:
limit descriptors n
For Bourne shells, enter:
Configuration Guide
35
Download from Www.Somanuals.com. All Manuals Search And Download.
File descriptors and user connections
ulimit -Sn new_value
where n is the current value for the soft limit, and new_value is the value to
which you want to increase the soft limit.
Note You can use the preceding commands in your RUN_server_name file to
increase the hard and soft limits. The RUN_server_name file is a Bourne shell
script, be sure to use the Bourne shell versions of these commands in the
RUN_server_name file.
Increasing the hard limit
“Sample program” on page 37.
v
Setting up the sample program to increase the hard limit
1
2
Create file_name.c (where file_name is the name you give the file), by
using an ASCII text editor. Type the text shown in the sample in “Sample
program” on page 37.
Compile the file:
cc file_name.c -o program_name
where file_name is the name of the source file you created, and
program_name is the name you want to give the program.
3
4
Change the program’s permissions and ownership so that it will execute as
“root”:
chmod 755 program_name
chown root program_name
where program_name is the name of the compiled program.
The “root” user can use the program to start Adaptive Server with
increased user connections by typing the following command at the
operating system prompt:
# program_name dataserver -d master_device_name
36
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3 Configuring the Operating System
where program_name is the name of the compiled program, and
master_device_name is the full path of Adaptive Server’s master device.
Instead of typing the command at the operating system prompt, you can
add program_name preceding the dataserver command line in the
Adaptive Server RUN_server_name file.
Sample program
Note This is an sample script; modify it as necessary.
The following example shows the source code that you can use to increase the
hard limit:
#include <sys/time.h>
#include <sys/resource.h>
#include <sys/types.h>
/*
** define MAX_CONNECTIONS to a number less than
** 10000. The number defined will then become the maximum
** number of connections allowed by an Adaptive Server.
*/
#define MAX_CONNECTIONS 9999
extern int errno;
main(argc,argv)
char **argv;
{
struct rlimit rlp;
uid_t uid;
rlp.rlim_cur = MAX_CONNECTIONS;
rlp.rlim_max = MAX_CONNECTIONS;
/* set the number of open file desriptors to
MAX_CONNECTIONS */
if (setrlimit (RLIMIT_NOFILE,&rlp) == -1)
{
perror("setrlimit");
exit(1);
}
/* reset the user id to disable superuser
privileges */
uid = getuid();
Configuration Guide
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Enabling asynchronous disk I/O
setuid(uid);
/* run the program indicated as arguments to
this program */
execv(*++argv, argv);
}
For additional information on user connections, see the System Administration
Guide.
Enabling asynchronous disk I/O
For HP-UX
This step is mandatory for HP users.
To improve I/O performance on character or raw and block devices, enable
asynchronous I/O by installing the HP asynchronous I/O driver from SAM. For
help with installing this driver, contact your operating system administrator or
HP technical support.
Note Before executing the following instructions, shut down Adaptive Server
(or SQL Server).
To enable asynchronous I/O:
1
From the SAM Kernel Configuration menu, choose Drivers and set the
Pending State for asyncdisk to In by adding the driver.
An alternate step could be done by adding the asyncdsk subsystem
keyword to /stand/system.
2
3
Rebuild the kernel, and reboot the system.
Execute the following commands using the userid root:
#/etc/mknod/dev/async c 101 4
#chmod 0660/dev/async
#chown <uid> /dev/async
#/etc/setprivgrp <ugrp> MLOCK
Where:
<uid> is the identification (user ID)used by the user that is booting
Adaptive Server.
<ugrp> is the user group for the <uid> user ID.
38
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3 Configuring the Operating System
4
At the UNIX prompt, execute the following statements as “root”. The user
ID of the user who is starting Adaptive Server and Backup Server must be
the owner of the /dev/async directory.
HP-UX 11.23
This step is mandatory for HP users.
To improve I/O performance on character or raw block devices, enable
asynchronous I/O by installing the HP asynchronous I/O driver from SAM. For
help with installing this driver, contact your operating system administrator or
HP technical support.
Note Before executing the following instructions, shut down Adaptive Server
(or SQL Server).
1
2
3
4
5
To launch the Kernel Configuration use kcweb -F.
Select Modules.
Select asyncdsk and change the next boot to static.
Rebuild the kernel, and reboot the system.
Execute the following commands using the userid root:
#/etc/mknod/dev/async c 101 4
#chmod 0660/dev/async
#chown <uid> /dev/async
#/etc/setprivgrp <ugrp> MLOCK
Where:
<uid> is the identification (user ID) used by the user that is booting
Adaptive Server.
<ugrp> is the user group for the sybase userid.
6
At the UNIX prompt, execute the following statements as “root”. The user
ID of the user who is starting Adaptive Server and Backup Server must be
the owner of the /dev/async directory.
HP-UX on Itanium
To verify that the async I/O is active on the Itanium machine:
1
2
Log in as root.
Issue the command:
# kcmodule -a | grep aync
Result: asyncdsk static required
or you can also use the following:
Configuration Guide
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Enabling asynchronous disk I/O
# ls /dev/asyn*
idev/async /dev/asyncdsk
For IBM AIX
Enable asynchronous disk I/O.
This step is mandatory for IBM users.
Enable asynchronous I/O by adjusting the kernel parameters, using the System
Management Interface Tool (SMIT):
1
2
3
4
Enter “smit” at the UNIX prompt.
From the Devices menu, select Asynchronous I/O.
Select Change/Show Characteristics of Asynchronous I/O.
Enter the values from Table 3-2:
Table 3-2: SMIT parameters for asynchronous I/O
Values for RS/6000 AIX
4.3.3
SMIT parameter
MINIMUM number of servers
MAXIMUM number of servers
MAXIMUM number of REQUESTS I/O
Server PRIORITY
1
10
4096
39
ASYNC I/O STATE
Available
(to be configured at system restart)
If your system uses more than seven disks at the same time for Asynchronous
I/O, increase the MAXIMUM number of servers value by 1 for every active
device.
Note Setting the minor device number on /dev/async to 4 reduces or eliminates
transient 605 errors in Adaptive Server.
If you are using LVM mirroring, set the minor device number to 0x0.
40
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3 Configuring the Operating System
Adjusting the client connection timeout period
Adaptive Server uses the KEEPALIVE option of the TCP/IP protocol to detect
clients that are no longer active. When a connection to a client is inactive for a
period of time (the timeout period), the operating system sends KEEPALIVE
packets at regular intervals. If it does not receive a response from the client
machine for any of these packets, the operating system notifies Adaptive
Server that the client is no longer responding. Adaptive Server then terminates
the client’s connection.
The KEEPALIVE default timeout period is 2 hours (7,200,000 ms). To display
the current time value, use the command for your platform as shown in the
following sections.
For HP-UX
To display the current timeout period, enter:
/usr/contrib/bin/nettune -l
Note The switch is a lowercase “L”, not the number one (1).
The tcp_keepstart parameter specifies the length of time (measured in seconds)
to keep an idle connection active before the system checks to see if the
connection died.
To change the timeout period, use the nettune -s command.
For IBM RS/6000
To display the current timeout value, enter:
/usr/sbin/no -o tcp_keepidle
The tcp_keepidle parameter specifies the length of time (measured in half
seconds) to keep an idle connection active before the system checks to see if
the connection died. The default is 14,400 half seconds (7200 seconds, or 2
hours).
IBM recommends a value of at least 15 minutes.
Configuration Guide
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking for hardware errors
For Sun Solaris
To display the timeout value, enter:
/usr/sbin/ndd -get /dev/tcp tcp_keepalive_interval
To reduce the timeout period to 15 minutes (900,000 ms.), enter:
/usr/sbin/ndd -set /dev/tcp tcp_keepalive_interval 900000
For Linux
To display the timeout value, enter:
/sbin/sysctl -e net.ipv4.tcp_keepalive_time
To reduce the timeout period to 15 minutes (900 seconds,) enter:
/sbin/sysctl -w net.ipv4tcp_keepalive_time=900
Checking for hardware errors
The following types of hardware error messages indicate problems that may
lead to database corruption:
•
•
•
•
Disk read, write, or retry errors
Timeouts
System panics
Memory problems of any type
For HP-UX
Check the /var/adm/syslog/syslog.log file on a regular basis. You can view the
file directly, or you can use the HP-UX dmesg command. See your operating
system documentation for more information.
42
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3 Configuring the Operating System
For IBM RS/6000
The errpt command includes several options for limiting the report to events
that match certain criteria. Use the errpt command on a regular basis. If errors
appear, use the diagnostic tool diag to check your memory and disks. Or use the
System Management Interface Tool (SMIT) to run the errpt command. This
command may produce a lot of output.
For Sun Solaris
Check the /var/adm/messages file on a regular basis. If any of the types of
hardware errors described in the beginning of this section appear, use the Sun
Microsystems diagnostic tool, sundiag, to check memory and disks. See the
operating system documentation for more information.
For Linux
Check the /var/log/messages file on a regular basis. See the operating system
documentation for more information.
Monitoring the use of operating system resources
The System Administration Guide discusses maintaining the optimal number of
Adaptive Server engines for your workload and system configuration. To
determine the optimal number, monitor system and CPU usage.
For HP-UX
HP-UX supplies many tools to help monitor performance, some of which are
described as follows:
•
The sar command reports relative and absolute I/O throughput rates to
each disk and controller.
•
•
The vmstat command monitors virtual memory usage.
The netstat command monitors network status.
Configuration Guide
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitoring the use of operating system resources
•
•
The ps command provides a snapshot of accumulated CPU time and usage
for individual processes.
The time command can be useful in determining the various user, system,
and real-time resources used over a complete run.
For details about these tools, see your operating system documentation.
For IBM RS/6000
IBM RS/6000 supplies the following tools for monitoring performance:
•
The iostat command reports the amount of I/O on terminals and hard disks
and how CPU time is spent.
•
•
The vmstat command monitors virtual memory usage.
The netstat command monitors network status.
•
netstart -v displays Transmit/Receive Statistics. It is also used to
determine if enough buffers have been configured for network traffic.
•
no -a command displays current network options. It is also used for
tuning mbuf pools.
•
•
The ps command provides a snapshot of accumulated CPU time and usage
for individual processes.
The time command determines the various user, system, and real-time
resources during a complete run.
For details about these tools, see your operating system documentation.
For Sun Solaris and Linux
Sun Solaris and Linux supplies the following tools to help monitor
performance:
•
The iostat command reports the amount of I/O on terminals and hard disks
and how CPU time is spent.
•
•
The vmstat command monitors virtual memory usage.
The netstat command monitors network status.
44
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3 Configuring the Operating System
•
•
The ps command gives you an accurate snapshot of accumulated CPU
time and usage for individual processes. This can be very helpful in
determining the dataserver-, engine-, and process-specific loading.
The time command can be useful in determining the various user, system,
and real-time resources used over a complete run.
For details about these tools, see your operating system documentation.
A sample C shell maintenance script
Running dbcc checks and performing database backups protect the integrity
and recoverability of your Adaptive Server databases. The following sample C
shell script calls several isql scripts to help you do this:
#!/bin/csh -f
if ( -e dbcc_mail.out) then
rm dbcc_mail.out
endif
foreach i (*.dbcc)
isql -Usa -Ppassword < $i > dbcc_out
if ( ‘grep -c ‘Msg 25[0-9][0-9]’ dbcc_out’ ) then
echo "There are errors in" $i >> dbcc_mail.out
cat dbcc_out >> dbcc_mail.out
else
echo "Backing up " $i:r >> dbcc_mail.out
isql -Usa -Ppassword < $i:r.backup
endif
end
mail -s "Backup Report" jjones < dbcc_mail.out
The first set of scripts (one for each database with a file name appended with
.dbcc) runs dbcc checkalloc and dbcc checkdb for each database and sends the
messages to an output file called dbcc_out.
For example, the script master.dbcc runs dbcc to check the master database:
dbcc checkalloc (master)
go
dbcc checkdb (master)
go
The C shell script then runs the grep command to find 2500-level error
messages in the dbcc output. The results of the grep command go into an output
file called dbcc_mail.out.
Configuration Guide
45
Download from Www.Somanuals.com. All Manuals Search And Download.
A sample C shell maintenance script
Next, the script invokes an isql backup script for each database for which no
2500-level errors occurred and adds the “Backing up database_name” line to
dbcc_mail.out. For example, the script master.backup backs up the master
database:
use master
go
dump database master to master_dump
go
You may want to add appropriate dump transaction commands to your scripts.
If there are 2500-level error messages, the script does not back up the database.
At the end of the script, dbcc_mail.out is mailed to the System Administrator
“jjones,” who then has a record of fatal dbcc errors and successful backups.
You can tailor the sample shell and isql scripts to suit the needs of your
installation.
To have the scripts execute automatically, edit the crontab file, and add an entry
similar to this:
00 02 * * * /usr/u/sybase/dbcc_ck 2>&1
This example executes a C shell script called dbcc_ck every morning at 2:00
a.m.
46
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
4
Adaptive Server Default
Configuration
When you install or upgrade Adaptive Server, it includes some default
parameter settings and a few of its auxiliary programs.
After installing and testing this “default” Adaptive Server, you can
configure it to your system’s needs and install other optional features.
Monitor Server see the System Administration Guide.
For information about configuring languages, character sets, and sort
orders, as well as optional features, see the System Administration Guide.
Topic
Page
Default settings
47
Default settings
After installation, Adaptive Server default settings are as listed in Table 4-
1. You may need to configure these settings to suit your computer and
database needs.
Table 4-1: Defaults for Adaptive Server parameter settings
Item
Name
Default value
Servername
Transport Type
Port number
TCP/IP
5000
Error log path
Event logging
$SYBASE/$SYBASE_ASE/install/servername.log
Not configured
International support (Localization)
Language us_english
•
Configuration Guide
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Default settings
Item
Default value
HP – Roman8
•
Character set
IBM – ISO 8859-1
Sun – ISO 8859-1
Linux – iso_1
•
Sort order
Linux – Binary ordering
Standard
Login security mode
Table 4-2 lists the default settings for the Backup Server, Monitor Server, and
XP Server. For more information about these servers, see “Introduction” on
page 1.
Table 4-2: Defaults for Backup, Monitor, and XP Servers
Server
Item
Default value
Backup Server
Name
AdaptiveServername_back
Network support (TCP/IP)
Socket number
Error log path
5001
$SYBASE/$SYBASE_ASE/install/AdaptiveS
ervername_back.log
Monitor Server
XP Server
Name
AdaptiveServername_mon
Network support (TCP/IP)
Socket number
Error log path
5002
$SYBASE/$SYBASE_ASE/install/AdaptiveS
ervername_back.log
Name
$SYBASE/$SYBASE_ASE/ADAPTIVESER
VERNAME_XP
Network support (TCP/IP)
Socket number
Error log path
5003
N/A
48
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
5
Setting Up Communications
Across the Network
Server applications, and client software across a network. Clients can
communicate with one or more servers, and servers can communicate
with other servers via remote procedure calls.
Topic
Page
How Adaptive Server determines which directory service entry to 50
use
Creating a directory services entry
Supported directory drivers
51
51
52
52
53
55
58
59
63
66
Contents of an interfaces file
Understanding the format of the interfaces file
Creating a master interfaces file
Configuring interfaces files for multiple networks
IPv6 support
Troubleshooting
Directory services contains information about the network locations of
servers. Directory services contain entries for all Adaptive Servers,
Backup Servers, and other server products on the network.
In the Sybase client/server environment, a client can connect with
Adaptive Server if it knows where the server resides on the network and
if the server supports the client’s language or character set. When a client
initiates a connection, it looks in its directory services for the network
location of the target server.
Directory services list the name and address of every server, including
Backup Server, Monitor Server, and XP Server. When you are using a
client program, and you want to connect with a particular server, the client
program looks up the server name in the directory services and connects
to that server.
Configuration Guide
49
Download from Www.Somanuals.com. All Manuals Search And Download.
How Adaptive Server determines which directory service entry to use
Servers also need network information. When a server starts up, it looks in its
interfaces file to determine where to listen for client connection requests. In
addition, Adaptive Server can take on a client role when it makes remote
procedure calls to other Adaptive Servers.
Table 5-1 shows where to find more information on server and client interfaces
file tasks and topics.
Table 5-1: Where to find interfaces file tasks and topics
Type of
interfaces file
Task or topic
See
UNIX server or
client
Adding entries for multiple
Adaptive Server installations
Chapter 7, “Customizing Localization for Adaptive
Server”
Creating a master interfaces file
for multiple installations
“Creating a master interfaces file” on page 58
Configuring for multiple networks “Configuring interfaces files for multiple networks” on
page 59.
Reference information
“Understanding the format of the interfaces file” on
page 55.
PC-client
Configuring a client
Installation Guide for your platform
Reference information and
instructions for advanced tasks
Open Client and Open Server Programmer’s Supplement
for your PC-client platform, or the appropriate Open
Client documentation
Client platforms
not listed
Configuring, reference
information, and instructions for
advanced tasks
Open Client and Open Server Programmer’s Supplement
for your PC-client platform, or the appropriate Open
Client documentation
How Adaptive Server determines which directory
service entry to use
Adaptive Server uses directory services to determine the address at which it
should listen for clients. When you start Adaptive Server, it performs the
following steps:
1
It looks for the server name supplied in the command line -s option. If the
server name is not supplied in the command line:
2
It determines its own name by checking the value of the DSLISTEN
environment variable. If the DSLISTEN environment variable is not set,
then it assumes that the server name is SYBASE.
50
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5 Setting Up Communications Across the Network
3
4
Looks in directory services for an entry whose name matches the name
found in the steps above.
It uses the network information provided by the directory services entry it
has found to listen for client connections.
How a client uses directory services
When a client connects to a server it:
•
Determines the name of the server either programmatically or by referring
to the DSQUERY environment variable. If the application user has not set
DSQUERY, the runtime value for the server name defaults to the SYBASE
environment variable.
•
•
Looks in directory services for an entry whose name matches the name of
the server.
Uses the network information provided by the directory services entry to
connect to the server. If the client cannot connect the first time, it makes
additional attempts according to the delay and retry numbers indicated in
directory services. If no matching entry is found, an error message is
written to the client’s standard error file. If multiple networks are
supported, the client attempts to connect using the information in the
second network address entry for the server.
The Open Client documentation discusses client connections in much greater
detail. See the Open/Client Programmer’s Supplement for your client platform
or the appropriate Open/Client documentation.
Creating a directory services entry
The installation program, srvbuild, automatically creates a directory services
entry for each server installation. You can also use the following Sybase
utilities to edit the network information in directory services:
•
•
dsedit – an X-Windows GUI utility.
dscp – a UNIX command line utility.
For details on using these utilities, see the Adaptive Server Utility Guide.
Configuration Guide
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported directory drivers
Supported directory drivers
There are three supported drivers:
•
•
•
interfaces driver
Lightweight Directory Services driver.
Cell Directory Service (CDS) provided by Distributed Computing
Environment (DCE)
This remainder of this chapter describes the interfaces file and provides
specific configuration information for each supported UNIX platform. For
information about LDAP drivers, Cell Directory Services, and for a
comparison between interfaces files and LDAP directory services, see the
Open Client/Server Configuration Guide for your platform.
Contents of an interfaces file
An interfaces file contains network information about all servers on your
network, including Adaptive Server, Backup Server, and XP Server, plus any
other Open Server applications.
The network information in the file includes the server name, network name or
address of the host machine, and the port, object, or socket number (depending
on the network protocol) on which the server listens for queries. See
“Understanding the format of the interfaces file” on page 55 for the specific
makeup of the interfaces file entry.
Each entry in an interfaces file can contain two types of lines:
•
Master lines, which are used by server applications to listen for queries
over the network. This information is called a listener service.
•
Query lines, which are used by client applications to connect to servers
over the network. This information is called a query service.
The network information contained in the master and query lines for a server
is identical because a server listens for connection requests on the same port
that clients use to request connections.
A server needs both master and query lines in its interfaces file, since servers
sometimes act as clients to other servers.
52
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5 Setting Up Communications Across the Network
A client’s interfaces file does not need a master line. It functions correctly with
only a query line.
If your site has
multiple installations
If you have more than one Adaptive Server installation, each server’s interfaces
If all of your server products are running on the same platform, you can create
one master interfaces file and copy that file to each machine. For more
information, see “Creating a master interfaces file” on page 58.
If the host machine supports multiple networks, see “Configuring interfaces
files for multiple networks” on page 59.
Heterogeneous and homogeneous environments
You can run Adaptive Server and clients on the same platform or on different
platforms.
If the platforms are different, each platform may require a different format and
configuration for its interfaces file. Figure 5-1 illustrates how a PC client uses
network information in its interfaces file (sql.ini) to connect to Adaptive Server
running under UNIX, and how Adaptive Server uses its interfaces file to
connect to another server during a remote procedure call.
Configuration Guide
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Heterogeneous and homogeneous environments
Figure 5-1: Establishing network connections in a heterogeneous
environment
Harpo SQL
server
PC clients
Make a remote
procedure call to
Chico.
sql.ini
[Harpo]
xxxxx
Get Harpo’s
address and
connect.
interfaces
Harpo
xxxxx
Chico SQL
server
Chico
xxxxx
PC clients
[Chico]
xxxxx
Get Chico’s
address and
connect.
If both a client and a server are running under UNIX, the same interfaces file
is valid for both. Figure 5-2 illustrates how clients and Adaptive Servers
running in a homogeneous environment can use copies of the interfaces file to
establish connections. Because the two Adaptive Servers are running under the
same operating system, they can use the same interfaces file or exact copies of
the same file.
54
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5 Setting Up Communications Across the Network
Figure 5-2: Establishing network connections in a homogeneous
environment
Harpo SQL
Get Chico’s
server
address and
make an RPC.
Homogeneous
clients
Get Harpo’s
address and
connect.
Harpo
xxxxx
Chico
xxxxx
Chico SQL
server
Get Chico’s address
and connect.
Understanding the format of the interfaces file
The following rules apply to the format of interfaces file entries:
•
•
Each Adaptive Server has only one entry, although there may be multiple
lines in the entry.
Each line that follows the servername line must begin with a space or a
character tab.
•
•
•
Each element on the line must be separated by a single space.
Each entry is separated by a blank line.
You can add comments to an interfaces file by adding a pound sign (#) at
the beginning of the line and a line break at the end.
There are two interfaces file entry formats, TLI and TCP.
A TLI style entry looks like:
Configuration Guide
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the format of the interfaces file
servername retry_attempts delay_interval<newline>
<tab>service_type api protocol device address filter<newline>
<tab>ha_failover servername<newline>
A TCP style entry looks like:
servername retry_attempts delay_interval<newline>
<tab>service_type protocol network machine port filter<newline>
<tab>ha_failover servername<newline>
Components of an interfaces file entry
Table 5-2 describes the components of an interfaces file entry.
Table 5-2: Components of an interfaces file
Component
Value
servername
Name of Adaptive Server or Backup Server. Requirements for a server name are:
•
•
•
The name cannot be more than 30 characters long.
The first character must be a letter (ASCII a through z, A through Z).
The characters that follow must be letters, numbers, or underscores (_).
retry_attempts (optional)
Number of times you want the client to try to connect to a server after initial
failure. Default is 0.
delay_interval (optional)
Number of seconds between connection attempts. Default is 0.
Type of service defined by entry. Must be one of the following:
service_type
•
•
master
query
api
Application programming interface available to the network.The supported value
is tli.
protocol
Name of the network protocol. Protocol types available are:
•
TCP/IP, represented by the letters “tcp”
network
host
Name of the network; not currently used by Adaptive Server. srvbuild enters
“ether” as a placeholder.
Network name or address of server’s host machine.
•
For TCP/IP, use either the host name or Internet address. Maximum size of
entry is 32 bytes.
To determine the host name of a machine, log in to that machine and enter:
/bin/hostname
56
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5 Setting Up Communications Across the Network
Component
Value
machine
Network name or address of server’s host machine.
You can use either the host name or Internet address. Maximum size of entry is 32
bytes.
To determine the host name of a machine, log in to that machine and enter:
/bin/hostname
device
The network device endpoint.
For TCP networks, the device varies according to the vendor supplying the
networking software. Check the vendor-specific documentation for the name of
the device. Your network may provide multiple stream devices corresponding to
different protocols in the TCP protocol suite. Choose the TCP streams device.
Common TCP streams devices is /dev/tcp.
address for a TLI protocol
Address consists of:
entry
•
•
•
Address prefix, “\x” for TLI.
Network type, always 0002.
Port number converted to four digits, hexadecimal. Must be a unique number
between 1025 and 65535. Check the /etc/services file on each machine on the
network to see what port numbers are in use. Enter the Adaptive Server port
number in a new section of /etc/services labeled “Sybase specific services.”
You do not have to make this entry for the operating system to function
properly, but the presence of the port number in the file may prevent other users
from using the port number.
•
•
IP network node address of the host machine converted to 8 digits,
hexadecimal.
Trailing zeros, optional, 16 digits.
port
A unique port number between 1025 and 65535. Check the /etc/services file on
each machine on the network to see what port numbers are in use. Enter the
Adaptive Server port number in a new section of /etc/services labeled “Sybase
specific services.” You do not have to make this entry for the operating system to
function properly, but the presence of the port number in the file may prevent other
users from using that port number.
ha_failover
filter
An entry created in directory services or the interfaces file for high availability.
Adaptive Server supports Secure Socket Layers (SSL) as a filter which is
appended to the master and query lines of the directory services. SSL is the
standard for securing the transmission of sensitive information.
Configuration Guide
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a master interfaces file
Creating a master interfaces file
A master interfaces file contains entries for all Sybase servers on the network.
It can be used with every server and client connected to the network. By
distributing copies of a master interfaces file, you can ensure that all Sybase
products on the network interact with one another.
Distributing copies of one interfaces file (a master file) with entries for all
Adaptive Servers is the easiest way to maintain consistency in the interfaces
files in a homogeneous environment on a network.
You can make all changes to one version of the file and then copy the updated
master file to all appropriate Sybase directories.
You can make a master file in one of two ways:
•
•
Using dsedit or dscp
Using a text editor
Using dsedit or dscp to create a master interfaces file
You can use the dsedit or dscp utility to create a master interfaces file, which
you can then distribute to all servers. If you are not an experienced Sybase user,
you may find that using dsedit or dscp is easier than using a text editor. Using
dsedit or dscp also ensures that your interfaces file is consistent in format.
To create a master interfaces file with dsedit or dscp:
1
2
3
Select the interfaces file that contains the most complete, up-to-date
information.
Begin a dsedit or dscp session in your latest Sybase installation to edit this
interfaces file.
Add entries for any Adaptive Servers or Backup Servers that are not listed
in this file.
For details on using these utilities, see the Adaptive Server Utility Guide.
Using a text editor to create a master interfaces file
To construct a single master interfaces file from several individual interfaces
files:
58
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5 Setting Up Communications Across the Network
1
2
3
Concatenate the individual interfaces files.
Make a copy of the file.
Use an ASCII text editor to modify the copy of the concatenated file.
Note When you manually edit an interfaces file, be sure that, for each
entry, each line following the first line begins with a <tab> character.
The following elements must be correct and unique in the resulting file:
•
servername – each server entry in the interfaces file must be unique.
During the srvbuild session, you had the choice of entering a server
name or accepting the default server name, SYBASE, for those
servers. If you accepted the default name, find any duplicate
SYBASE entries in your merged file, and rename them.
•
•
A combination of the host machine’s network name or address and
Adaptive Server’s port or object number.
If the original interfaces file was created when there was only one
machine on the network, its entries may have the word “loghost” in
place of the machine name (address). If loghost is present, replace it
with the machine name.
Configuring interfaces files for multiple networks
On some platforms, Adaptive Server can accommodate multiple networks.
This allows Adaptive Server to listen for clients over multiple network
interfaces. You must add an entry for each network interface to the interfaces
file.
Configuring the server for multiple network handlers
To configure multiple network listeners:
1
Define a unique host name for each network interface in your operating
system’s host database.
Configuration Guide
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring interfaces files for multiple networks
2
In your interfaces file, use a text editor to add copies of the “master” line
for your Adaptive Server; one for each additional interface you want the
server to listen on.
3
4
Include a unique host name on each line to configure a network handler for
each network interface.
Port numbers within the interface need not be the same, but they can be.
They fall under the same rules for naming and numeric range as the
primary network interface.
Sample interfaces files for multiple network handlers
The following example shows an interfaces file for an Adaptive Server with
two network interfaces. The server host machine is known as
SERV_CORPNET on the corporate network and SERV_ENGNET on the
engineering network.
# PRODUCTION server with two network listeners
PRODUCTION<tab>3<tab>3<newline>
<tab>master tcp ether SERV_CORPNET 4559
<tab>master tcp ether SERV_ENGNET 5479
<tab>query tcp ether SERV_CORPNET 4559
When Adaptive Server restarts, it spawns a network handler process for each
master line in the entry that corresponds to the server’s DSLISTEN value.
Connections made on each interface are handled equally, as peers.
Configuring the client connections
When an Adaptive Server client scans the interfaces file for a server name, the
client uses the first “query” entry it encounters for the server’s entry. This
makes configuring clients to use multiple network connections less
straightforward than configuring the server ports. You have two choices:
•
Use the same DSQUERY name for all clients. The interfaces files on the
different machines contain different network names.
•
Use different DSQUERY names for the clients. The interfaces files on all
the machines are the same, but they contain multiple DSQUERY names.
60
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5 Setting Up Communications Across the Network
Using one network-independent DSQUERY name
If uniform client DSQUERY naming is important, you can make the necessary
changes in the network addressing of the clients in the interfaces file. You can
install separate Sybase installation directories and distinct interfaces files on
client file servers on each network to allow users to connect to the correct
network address. Instead of altering the DSQUERY name the clients use, you
maintain one DSQUERY name for all clients, on all networks, and alter each
network’s interfaces file accordingly.
This method assumes that:
•
You have complete control over what the Sybase installation clients see on
each network.
•
The interfaces file (at the very least) is not shared or copied among Sybase
installations on different networks.
The interfaces file looks like the following example on the “engineering”
network:
PRODUCTION<tab>3<tab>3<newline>
<tab>query tcp ether SERV_ENGNET 5470
<tab>master tcp ether SERV_CORPNET 4559
<tab>master tcp ether SERV_ENGNET 5479
The interfaces file looks like the following example on the “corporate”
network:
PRODUCTION<tab>3<tab>3<newline>
<tab>query tcp ether SERV_CORPNET 4559
<tab>master tcp ether SERV_CORPNET 4559
<tab>master tcp ether SERV_ENGNET 5479
The “query” line in each file name is different, depending on the network to be
used.
The full “master” entry is present in both files. This is allowed because only
Adaptive Server will use the “master” lines. Assuming that the server host
machine can see both networks (both host names are interchangeable), it does
not matter which interfaces file is used for Adaptive Server start-up.
Using different DSQUERY names
To use different DSQUERY names for each network listener:
Choose an additional server name.
1
Configuration Guide
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring interfaces files for multiple networks
You can concatenate the original server name and the network name. For
example, if your server is named PRODUCTION, you could choose the
names PRODUCTION_network1 and PRODUCTION_network2.
2
Do one of the following:
•
For PC clients, use sqledit to create multiple sql.ini file entries for the
server, one for each network. In the following example, you create
one entry for PRODUCTION_network 1 and one for
PRODUCTION_network2. For more information, see the Open
Client documentation for your client platform.
•
For UNIX clients, you can edit the interfaces files with an ASCII text
editor. From the server’s interfaces files, copy the server name line
and the “master” line for each network into the client interfaces file.
Add the appropriate server name for each entry, and change “master”
to “query.”
Clients on each network must use the DSQUERY value that
corresponds to the network the client is on. In the following example,
either PRODUCTION_network1 or PRODUCTION_network2 can
be used.
# Client entry for PRODUCTION on network1
PRODUCTION_network1<tab>3<tab>3<newline>
<tab>query tcp ether serv_corpnet 4559
# Client entry for PRODUCTION on network2
PRODUCTION_network2<tab>3<tab>3<newline>
<tab>query tcp ether serv_engnet 5479
Configuring for query port backup
Another use for multiple network interfaces is to provide a backup in case of
network failure. If a client is connected to a server via two networks, the client
can establish a connection via the second network if the first one goes down.
To configure Adaptive Server for query port backup:
1
Install multiple “master” and “query” lines in a server entry in the
interfaces file.
2
Adaptive Server listens for connections at both ports. Clients looking for
a host name and a port number for a connection to an Adaptive Server try
the port on each “query” line in order, until they establish a connection.
62
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5 Setting Up Communications Across the Network
The following example shows how to configure a backup network that
will be used only if the normal connection fails. The primary network is
“corporate network” and backup is “engineering network.”
# PRODUCTION server with two network listeners
PRODUCTION<tab>3<tab>3<newline>
<tab>master tcp ether SERV_CORPNET 4559
<tab>master tcp ether SERV_ENGNET 5479
<tab>query tcp ether SERV_CORPNET 4559
<tab>query tcp ether SERV_ENGNET 5479
3
Configure PC-client interfaces files with the appropriate multiple “query”
entries, as described in the Open Client documentation. For client
interfaces files in a homogeneous environment, you can copy the entire
interfaces file entry for the Adaptive Server into the client interfaces file.
4
A connection on the secondary port occurs only if the corporate network
is disabled, or if the corporate network interface on the host machine fails
or is shut down due to a network-related failure.
IPv6 support
Adaptive Server supports IPv6 technology.
Understanding IPv6
IPv6 addressing terminology:
•
•
•
Link-local address – an IPv6 address that is usable only over a single link.
Site-local address – an IPv6 address that can be used within a single-site.
Global address – an IPv6 address that can be used across the global
Internet.
IPv6 application types:
•
•
IPv6-unaware – an application that cannot handle IPv6 addresses.
IPv6-aware – an application that can communicate with nodes that do not
have IPv4 addresses. In some cases, this might be transparent to the
application, for instance when the API hides the content and format of the
actual addresses.
Configuration Guide
63
Download from Www.Somanuals.com. All Manuals Search And Download.
IPv6 support
•
•
IPv6-enabled – an application that, in addition to being IPv6-aware, takes
advantage of some IPv6 features.
IPv6-required – an application that requires some IPv6 features and cannot
operate over IPv4.
IPv6 Infrastructure:
IPv6 infrastructure
Dual Stack infrastructure implements both IPv4 and IPv6. This is the
recommended infrastructure implementation for using Adaptive Server
Enterprise as an IPv6-aware server.
Sybase applications are IPv6-aware. All code to turn Sybase™ Adaptive
Server and the Open Client/Server components IPv6-aware was done using the
IETF designed primitives, see “Creating or converting for IPv6-aware
applications.” The following matrix lists the platform run-time requirements
and the specific product and its release version:
Table 5-3: IPv6 support
Adaptive Server IPv6 Open Client/Server
Platform
awareness
IPv6 awareness
Sun Solaris 8 32- and 64- 12.5.3a and 15.0
bit
12.5 and 15.0
HP-UX 11i(v1) 32- and
64-bit
12.5.3a and 15.0
12.5 and 15.0
Microsoft Server 2003
Linux RHEL 3.0
12.5.3a and 15.0
15.0
12.5 and 15.0
12.5 and 15.0
Many Sybase products that are Open Client/Server based like XP Server,
Backup Server, Replication Server and Open Switch became automatically
IPv6-aware due to the layered Open Client Transport Control Layer (CTlib-
>NETlib) which is IPv6-aware for network-socket operations. An important
note is that any DBlib based Open Client product is not IPv6-aware.
For Adaptive Server Enterprise being IPv6-aware is a complex issue because
some components within the ASE are 3rd party components and are not yet
IPv6-aware. To understand how this impacts Adaptive Server Enterprise the
following list shows all functional mechanisms of Adaptive Server Enterprise
that are IPv6-aware with respect to the platform / release matrix above:
•
Connection Handler
64
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5 Setting Up Communications Across the Network
•
•
•
•
•
•
•
•
RPC mechanisms
Job Scheduler Task / Agent session connection
Network Host API
UDP Message support for sybsendmsg
Component Integration Services connectivity
Host / name resolving
XML URL connection handler
Auditing for client address data
The following functional mechanisms in Adaptive Server Enterprise do not
support IPv6. These mechanisms in Adaptive Server Enterprise are IPv6-
unaware. They will gradually (over time) be become IPv6-aware in follow-on
releases:
•
•
•
Java support
License Management Server
LDAP driver
Starting Adaptive Server Enterprise as IPv6-aware
Adaptive Server is IPv6-unaware, by default. To make Adaptive Server IPv6-
aware, you must start Adaptive Server with trace flag 7841. This causes
Adaptive Server to determine IPv6 availability and makes Adaptive Server
IPv6-aware.
See your Network or IT specialist to configure your platforms and Network
Infrastructure correctly for IPv6 support.
A second trace flag, 7815 can be set when you start Adaptive Server which
captures and logs address connection requests and host / name lookups.
The IPv6 Adaptive Server traceflags:
•
•
T7841 – Enable Adaptive Server IPv6-awareness
T7815 – Report all Adaptive Server IPv4 & IPv6 Client address connect
requests
Configuration Guide
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before starting Adaptive Server for IPv6-aware operations, make sure that
your infrastructure is correctly set up. Once your operating system is correctly
configured, an IPv6 connection handler can be configured and enabled.
Configuring and enabling the IPv6 connection handler requires adding an
additional DCL entry. A single Adaptive Server configuration can typically
carry up to 32 connection handler assignments within the DCL.
For example if you have a Site-local setup with two domains administrated
under the nameserver setup:
sybase.com - being responsible for all IPv4 networking applications
v6.sybase.com - being responsible for all IPv6 networking applications
The DCL entry for Adaptive Server to start named “SYBASE” on the host
“revival” for port 17100 would typically look like:
SYBASE
master tcp ether revival.sybase.com 17100
query tcp ether revival.sybase.com 17100
master tcp ether revival.v6.sybase.com 17100
query tcp ether revival.v6.sybase.com 17100
In the above example, when Adaptive Server is started with IPv6-awareness it
creates two connection handlers. One listens on port 17100 for incoming IPv4
Clients connection requests, and the other listens on port 17100 for incoming
IPv6 Clients connection requests.
Troubleshooting
This section describes how to correct some common situations that may cause
a server to not start.
Server fails to start
If a server fails to start with the following message, the port number specified
in the interfaces file may be in use:
00:00000:00002:2003/09/22 12:37:23.63 kernel network name SERV_CORPNET, type
ether, port 4559, filter NONE
00:00000:00002:2003/09/22 12:37:23.65 kernel ninit: bind, Address already in
use
00:00000:00002:2003/09/22 12:37:23.68 server Error: 1602, Severity: 18, State:
66
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5 Setting Up Communications Across the Network
2
00:00000:00002:2003/09/22 12:37:23.68 server Unable to initialize network 0
00:00000:00002:2003/09/22 12:37:23.68 kernel ninit: All master network
listeners have failed. Shutting down.
00:00000:00002:2003/09/22 12:37:23.68 kernel ueshutdown: exiting
00:00000:00016:2003/09/22 16:11:35.46 server SQL Server shutdown by request.
v
Investigating the port assignment
1
Look in the interfaces file to identify the port number assigned to the
server.
2
Determine whether another process is using the same port number by
entering:
netstat -a
If the port number is presented as a local address in the netstat output, you
cannot use that port for the server. Another process is already using that
port.
3
To verify that the server port is in use, start the server manually.
The server does not start if its assigned port number is already in use.
For information on starting servers manually, see the installation
documentation for your platform and the Adaptive Server Utility Guide.
v
If a stale server process is retaining use of the port number
1
Do one of the following:
•
•
Use the operating system kill command to terminate the process.
Use another port number for the server by modifying the interfaces
file.
2
Start the server manually to confirm that the port number is available.
For information on starting servers manually, see the installation
documentation for your platform and the Utility Guide.
Error when executing an ESP
If you attempt to execute an ESP (extended stored procedure), you may see the
following error:
00:00000:00008:1997/09/10 12:52:53.03 kernel XP Server failed to start. Try
bringing up XP Server manually. Check SQL Server documentation for more
Configuration Guide
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
information on how to bring XP Server up.
XP Server cannot start because the port number may be in use by another
process. Use the netstat command described in the previous section to
determine if the port number specified for XP Server is in use.
If you find no processes using the same port number:
1
2
Restart Adaptive Server.
Execute the ESP that you attempted earlier.
XP Server should start automatically.
If you find a process using the same port number, you can do one of the
following:
•
•
Change the interfaces file to use a new port number for the XP Server.
Stop the process using the port number allotted to XP Server.
Restart Adaptive Server, and execute the ESP that you attempted earlier. XP
Server should start automatically.
68
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
6
Using the Lightweight Directory
Access Protocol as a Directory
Service
Topic
Page
69
Overview
The libtcl*.cfg file
70
73
Adding a server to the directory services
Multiple directory services
Encrypting the password
74
76
77
78
Performance
78
Migrating from the interfaces file to LDAP
79
Overview
Lightweight Directory Access Protocol (LDAP) is an industry standard
for accessing directory services. Directory services allow components to
look up information by a distinguished name (DN) from an LDAP server
that stores and manages server, user, and software information that is used
throughout the enterprise or over a network.
The LDAP server can be located on a different platform from the one on
which Adaptive Server or the clients are running. LDAP defines the
communication protocol and the contents of messages exchanged
between clients and servers. Messages are operators, such as client
requests for read, write and query, and server responses, including
data-format information.
Configuration Guide
69
Download from Www.Somanuals.com. All Manuals Search And Download.
LDAP directory services versus the Sybase interfaces file
The LDAP server stores and retrieves information about:
•
•
•
Adaptive Server, such as IP address, port number, and network protocol
Security mechanisms and filters
High availability companion server name
The LDAP server can be configured with these access restrictions:
•
•
Anonymous authentication – all data is visible to any user.
User name and password authentication – Adaptive Server uses the default
user name and password for UNIX platforms:
•
•
$SYBASE/$SYBASE_OCS/config/libtcl.cfg on 32-bit platforms
$SYBASE/$SYBASE_OCS/config/libtcl64.cfg on 64-bit platforms
User name and password authentication properties establish and end a session
connection to an LDAP server.
Note The user name and password that are passed to the LDAP server for user
authentication purposes are distinct and different from those used to access
Adaptive Server.
Note LDAP user authentication is not supported on IBM AIX.
(collectively the libtcl*.cfg file) the server information is accessible only from
the LDAP server. Adaptive Server ignores the interfaces file.
If multiple directory services are supported in a server, then the order in which
they are searched is specified in libtcl*.cfg. You cannot specify the search order
with the dataserver command-line option. See “Multiple directory services” on
page 77.
LDAP directory services versus the Sybase interfaces
file
The LDAP driver implements directory services for use with an LDAP server.
LDAP directories are an infrastructure that provide:
70
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6 Using the Lightweight Directory Access Protocol as a Directory Service
•
•
A network-based alternative to the traditional Sybase interfaces file
A single, hierarchical view of information, including users, software,
resources, networks, files, and so on
Table 6-1 highlights the differences between the Sybase interfaces file and an
LDAP server.
Table 6-1: interfaces file versus LDAP directory services
Directory services
interfaces file
Platform-specific
Platform-independent
Specific to each Sybase installation
Contains separate master and query entries One entry for each server that is accessed by both clients and servers
Cannot store metadata about the server Stores metadata about the server
Centralized and hierarchical
LDAP directory services support more attributes than the Sybase interfaces
file. These attributes can include server version, server status, and so on. See
Table 6-2 for a list of attributes.
Note LDAP is only supported with reentrant libraries. You must use isql_r,
instead of isql, when connecting to a server using LDAP directory services.
Table 6-2 lists the Sybase LDAP directory entries.
Table 6-2: Sybase LDAP directory definitions
Attribute name
Value type
Description
ditbase
interfaces file
or libtcl.cfg
DIT base for object tree. If the libtcl.cfg file is specified, the
interfaces file is ignored. The libtcl.cfg file can be overridden with
ct_con_prop() for a specified connection.
dn
Character
string
Distinguished name. Must be unique name that identifies the object.
sybaseVersion
Integer
Server version number.
Server name.
sybaseServername
Character
string
sybaseService
sybaseStatus
Character
string
Service type: Sybase Adaptive Server, or Sybase SQL Server.
Status: 1 = Active, 2 = Stopped, 3 = Failed, 4 = Unknown.
Integer
Configuration Guide
71
Download from Www.Somanuals.com. All Manuals Search And Download.
LDAP directory services versus the Sybase interfaces file
Attribute name
Value type
Description
sybaseAddress
String
Each server address includes:
•
Protocol: TCP, NAMEPIPE, SPX DECNET (entry is case
sensitive).
•
Address: any valid address for the protocol type.
Note dscp splits this attribute into Transport type and Transport
address.
sybaseSecurity (optional) String
Security OID (object ID).
sybaseRetryCount
Integer
Integer
String
This attribute is mapped to CS_RETRY_COUNT, which specifies
the number of times that ct_connect retries the sequence of network
addresses associated with a server name.
sybaseRetryDelay
This attribute is mapped to CS_LOOP_DELAY, which specifies the
delay, in seconds, that ct_connect waits before retrying the entire
sequence of addresses.
sybaseHAservername
(optional)
A secondary server for failover protection.
The traditional interfaces file with TCP connection and a failover machine
looks like:
master tcp ether huey 5000
query tcp ether huey 5000
hafailover secondary
An example of an LDAP entry with TCP and a failover machine looks like:
dn: sybaseServername=foobar, dc=sybase,dc=com
objectClass: sybaseServer
sybaseVersion: 1500
sybaseServername: foobar
sybaseService: ASE
sybaseStatus: 4
sybaseAddress: TCP#1#foobar 5000
sybaseRetryCount: 12
sybaseRetryDelay: 30
sybaseHAServernam: secondary
All entries in the LDAP directory service are called entities. Each entity has a
distinguished name (DN) and is stored in a hierarchical tree structure based on
its DN. This tree is call the directory information tree (DIT). Client
applications use a DIT base to specify where entities are stored. See “The
libtcl*.cfg file” on page 73.
72
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6 Using the Lightweight Directory Access Protocol as a Directory Service
In the example above, the entry describes an Adaptive Server named “foobar”
listening on a TCP connection with a port number of 5000. This entity also
specifies a retry count of 12 (times) and a retry delay of 30 (seconds). Once a
client has found an address where a server responds, the login dialog between
the client and the server begins.
You can find a complete list of Sybase’s LDAP directory schema in UNIX
$SYBASE/$SYBASE_OCS/config.
In the same directory, there is also a file called sybase-schema.conf, which
contains the same schema, but uses a Netscape-specific syntax.
Since LDAP supports multiple entries for each attribute, each address attribute
must contain the address of a single server, including protocol, access type, and
address. See sybaseAddress in Table 6-2.
For example, this is an LDAP entry for an Windows server listening on two
addresses, with different connection protocols:
sybaseAddress = TCP#1#TOEJAM 4444
sybaseAddress = NAMEPIPE#1#\pipe\sybase\query
Note Each entry in the address field is separated by the # character.
You can edit these entries with dsedit. See “Adding a server to the directory
services” on page 76.
To ensure cross-platform compatibility for all Sybase products, the protocol
and address attribute fields should be in a platform- and product-independent
format.
The libtcl*.cfg file
You use the libtcl*.cfg file to specify the LDAP server name, port number, DIT
base, user name, and password to authenticate the connection to an LDAP
server.
The purpose of the libtcl*.cfg file is to provide configuration information such
as driver, directory, and security services for Open Client/Open Server and
Open Client/Open Server-based applications. 32-bit utilities such as dsedit and
srvbuild, look up the libtcl.cfg, while 64-bit applications use the libtcl64.cfg file
for configuration information
Configuration Guide
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Enabling LDAP directory services
You should edit both the libtcl.cfg and the libtcl64.cfg files to ensure
compatibility between 32- and 64-bit applications.
The default libtcl.cfg file is located in $SYBASE/$SYBASE_OCS/config.
If LDAP is specified in the libtcl.cfg file, the interfaces file is not used.
Note Open Client/Open Server applications that use the -I option at start-up
override the libtcl.cfg file and use the interfaces file.
In its simplest form, the libtcl.cfg file is in this format:
[DIRECTORY]
ldap=libsybdldap.dll ldapurl
where the ldapurl is defined as:
The following LDAP entry, using these same attributes, is an anonymous
connection and only works only if the LDAP server allows read-only access.
ldap=libsybdldap.dll ldap://seashore/d=sybase,dc=com
You can specify a user name and password in the libtcl.cfg file as extensions to
the LDAP URL to enable password authentication at connection time.
Enabling LDAP directory services
To use a directory service, you must:
1
2
3
Configure the LDAP server according to the vendor-supplied
documentation.
Add the location of the LDAP libraries to the Unix load library path
environment variable for your platform.
Configure the libtcl.cfg file to use directory services.
Use any standard ASCII text editor to:
•
Remove the semicolon (;) comment markers from the beginning of
the LDAP URL lines in the libtcl.cfg file under the [DIRECTORY]
entry.
74
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6 Using the Lightweight Directory Access Protocol as a Directory Service
•
Add the LDAP URL under the [DIRECTORY] entry. See Table 6-3
for supported LDAP URL values.
Warning! The LDAP URL must be on a single line.
libtcl.cfg
password
libtcl64.cfg
ldap=libsydbldap64.so
password
For example:
[DIRECTORY]
bindname=cn=Manager,dc=sybase,dc=com secret
“one” indicates the scope of a search that retrieves entries one level below
the DIT base.
Table 6-3 defines the keywords for the ldapurl variables.
Table 6-3: ldapurl variables
Keyword
Description
Default
host (required)
The host name or IP address of the machine running None
the LDAP server
port
The port number that the LDAP server is listening on 389
ditbase (required) The default DIT base
None
Distinguished name (DN) of the user to authenticate NULL (anonymous authentication)
Password of the user to be authenticated NULL (anonymous authentication)
username
password
4
5
third-party libraries. The Netscape LDAP SDK libraries are located in
$SYBASE/$SYBASE_OCS/lib3p or lib3p64.The Unix load library path
environment variable must point to this directory.
Add your server entry to the LDAP server using dscp or dsedit. See
“Adding a server to the directory services” on page 76.
Configuration Guide
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding a server to the directory services
Adding a server to the directory services
Warning! Most LDAP servers have an ldapadd utility for adding directory
entries. Sybase recommends you use dsedit instead since it has built-in
semantic checks that generic tools do not provide.
Each server entry is made up of a set of attributes. When you add or modify a
server entry, you are prompted for information about server attributes. Some
attributes are provided by default, others require user input. When a default
value is provided, it appears in brackets “[ ]”. See Table 6-2 for accepted
values.
You can use srvbuild to add entries, but not modify or delete them.
v
Adding a server entry to the directory service using dsedit
Before you can add, delete, or modify an LDAP server entry, you must add the
LDAP URL to the libtcl.cfg file. See “The libtcl*.cfg file” on page 73.
Use dsedit to add a server to the directory service:
1
2
3
4
5
6
Source SYBASE.csh or SYBASE.sh to set the environment variables.
cd to $SYBASE/$SYBASE_OCS/bin.
Execute dsedit.
Select LDAP from the list of servers, and click OK.
Click Add New Server Entry.
Enter:
•
•
The server name – this is required.
The security mechanism – optional. This is the name of the high-
availability failover server, if you have one.
7
Click Add New Network Transport and:
•
•
•
Select the transport type from the drop-down list.
Enter the host name.
Enter the port number
8
Click OK two times to edit dsedit.
To view the server entries, enter the following URL in Netscape
76
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6 Using the Lightweight Directory Access Protocol as a Directory Service
For example:
Note Microsoft Internet Explorer does not recognize LDAP URLs.
For more information about dscp, see the Open Client/Server Configuration
Guide, in the 11.1.x Generic Collection at
Multiple directory services
Any type of LDAP service, whether it is an actual server or a gateway to other
LDAP services, is called an LDAP server.
You can specify multiple directory services for high-availability failover
protection. Not every directory service in the list needs to be an LDAP server.
For example:
[DIRECTORY]
ldap=libsydbladp.so ldap://test:389/dc=sybase,dc=com
ldap=libsybdldap.so ldap://huey:11389/dc=sybase,dc=com
In this example, if the connection to test:389 fails, the connection fails over to
the DCE driver with the specified DIT base. If this also fails, a connection to
the LDAP server on huey:11389 is attempted. Different vendors employ
different DIT base formats.
Note For more information, see the Open Client Client-Library/C
Programmer’s Guide and the Open Client Client-Library/C Reference Manual
Configuration Guide
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Encrypting the password
Encrypting the password
Entries in the libtcl.cfg file are in human-readable format. Sybase provides a
pwdcrypt utility for basic password encryption. pwdcrypt is a simple algorithm
that, when applied to keyboard input, generates an encrypted value that can be
substituted for the password. pwdcrypt is located in
$SYBASE/$SYBASE_OCS/bin.
From the $SYBASE/$SYBASE_OCS directory, enter:
bin/pwdcrypt
Enter your password twice when prompted.
pwdcrypt generates an encrypted password. For example:
0x01312a775ab9d5c71f99f05f7712d2cded2i8d0ae1ce78868d0e8669313d1bc4c706
Copy and paste the encrypted password into the libtcl.cfg file using any
standard ASCII-text editor. Before encryption, the file entry appears as:
ldap=libsybdldap.so
dc=com?password
Replace the password with the encrypted string:
ldap=libsybdldap.so
0x01312a775ab9d5c71f99f05f7712d2cded2i8d0ae1ce78868d0e8669313d1bc4c706
Warning! Even if your password is encrypted, you should still protect it using
file-system security.
Performance
Performance when using an LDAP server may be slower than when using an
interfaces file because the LDAP server requires time to make a network
connection and retrieve data. Since this connection is made when Adaptive
Server is started, changes in performance will be seen at login time, if at all.
During normal system load, the delay should not be noticeable. During high
system load with many connections, especially repeated connections with short
duration, the overall performance difference of using an LDAP server versus
the traditional interfaces file might be noticeable.
78
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6 Using the Lightweight Directory Access Protocol as a Directory Service
Migrating from the interfaces file to LDAP
There is no direct method to upgrade an existing server using the interfaces file
to one that uses lightweight directory services. To upgrade a previous release
of Adaptive Server to Adaptive Server version 15.0, see the Installation Guide
for Windows.
LDAP service.
1
2
Edit the $SYBASE/$SYBASE_OCS/config/libtcl.cfg or libtcl64.cfg file to
add the directory service. See “Enabling LDAP directory services” on
page 74.
3
4
Use dsedit and add the server entry to directory service. See “Adding a
server to the directory services” on page 76.
Restart your server.
Configuration Guide
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Migrating from the interfaces file to LDAP
80
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
7
Customizing Localization for
Adaptive Server
This chapter provides information about Sybase localization support for
Guide.
Topic
Page
81
Overview of localization support
Character set conversion
Sort orders
89
90
Language modules
93
Localization
94
Changing the localization configuration
97
Overview of localization support
Localization is the process of setting up an application to run in a
particular language or country environment, including translated system
messages and correct formats for date, time, and currency. Adaptive
Server supports localization for international customers and for customers
with heterogeneous environments.
This support includes:
•
Data processing support – Adaptive Server comes with character set
and sort order definition files it uses to process the characters used in
different languages.
Sybase provides support for the major languages in:
•
•
•
Western Europe
Eastern Europe
Middle East
Configuration Guide
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of localization support
•
•
Latin America
Asia
•
Translated system messages – Adaptive Server includes language modules
for:
•
•
•
•
•
•
•
•
•
Brazilian Portuguese
Chinese (Simplified)
French
German
Japanese
Korean
Polish
Spanish
Thai
•
Translated documentation – translated documentation is available in:
•
•
•
•
•
Chinese (Simplified)
French
German
Japanese
Korean
Language modules
Adaptive Server stores its localized software messages in separate language
modules.
When you install a language module, the installation program loads the
messages, character set, and sort-order files that support the new language in
the correct locations.
When you install Adaptive Server and Backup Server, system messages in
English are installed by default.
82
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7 Customizing Localization for Adaptive Server
Default character sets for servers
The default character set is the character set in which data is encoded and stored
on the Adaptive Server databases.
Changing the default language and character set
Warning! Make all changes to the character set and sort order for a new
Adaptive Server before creating any user databases or making any changes to
the Sybase-supplied databases. Changing the character set and sort order after
data or data structures have been added to Adaptive Server may require
additional steps. To change the character set or sort order after you have added
data, see the System Administration Guide.
After srvbuild configures a new Adaptive Server, it displays a message box
asking if you want to localize your Adaptive Server to a language other than
us_english and if you want to use a character set or sort order other than the
default.
srvbuild creates an Adaptive Server with the following defaults:
•
•
•
us_english language
iso_1 character set (on HP-UX platforms, use Roman8)
Binary sort order
Valid language options depend on what language modules were unloaded from
the distribution media onto your system.
All character sets are copied from the distribution media by default.
You can:
•
•
Click No to accept the defaults.
Click Yes to change the defaults.
The sqlloc menu is displayed. sqlloc is the GUI utility used to change
default languages, character sets, and sort orders.
By default, when Adaptive Server and Backup Server are installed on IBM,
and SUN Solaris systems, the installation installs the character set files for ISO
8859-1, which supports the Western European languages.
Configuration Guide
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of localization support
By default, when Adaptive Server and Backup Server are installed on HP
systems, the installation installs the character set files for ROMAN8, which
supports the Western European languages.
Changing the default character set for servers
You can select any character set as the default on Adaptive Server, including
character sets that are not the platform default character sets. Keep the
following guidelines in mind when selecting a new default character set:
•
•
To avoid conversion errors or overhead, determine the default character
set based on the character set used by your clients.
For example, if most of your clients use ISO 8859-1, you can minimize the
amount of data conversion that has to occur by specifying ISO 8859-1.
If your server is operating in a heterogeneous language environment,
choose a character set that works with all the character sets needed. Often,
this is Unicode (UTF-8).
Warning! Make all changes to the default character set and sort order for a new
Adaptive Server before creating any user databases or making any changes to
the Sybase-supplied databases. Changing the character set and sort order after
data or data structures have been added to Adaptive Server can cause incorrect
behavior. To change the character set or sort order after you have added data,
see the System Administration Guide.
Supported character sets
The following language, scripts and character sets are supported by Adaptive
Server:
•
•
•
•
•
•
•
Arabic – see Table 7-1 on page 85.
Baltic – see Table 7-2 on page 85.
Chinese, Simplified – see Table 7-3 on page 86.
Chinese, Traditional – see Table 7-4 on page 86
Cyrillic – see Table 7-5 on page 86.
Eastern European – see Table 7-6 on page 86.
Greek – see Table 7-7 on page 87.
84
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7 Customizing Localization for Adaptive Server
•
•
•
•
•
•
Hebrew – see Table 7-8 on page 87.
Japanese – see Table 7-9 on page 87.
Korean – see Table 7-10 on page 87.
Thai – see Table 7-11 on page 87.
Turkish – see Table 7-12 on page 88.
Unicode (which supports over 650 languages) – see Table 7-13 on
page 88.
•
•
Vietnamese – see Table 7-14 on page 88.
Western European – see Table 7-15 on page 88.
The tables define each character set and indicate information on whether it
requires Unilib conversion (Unilib Required column).
•
•
Check mark (x) – the character set requires Unilib conversion.
No check mark – the character set may use either the Unilib
conversion or the built-in conversion.
For more information see “Character set conversion” on page 89.
Table 7-1 lists the Arabic character set:
Table 7-1: Arabic character sets
Character set Unilib required Description
cp864
X
X
X
PC Arabic
cp1256
iso88596
Microsoft Windows Arabic
ISO 8859-6 Latin/Arabic
Table 7-2 lists the Baltic character set:
Table 7-2: Baltic character sets
Character set Unilib required Description
cp1257
X
Microsoft Windows Baltic
Table 7-3 lists the simplified Chinese character set:
Configuration Guide
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of localization support
Table 7-3: Simplified Chinese character sets
Character set Unilib required Description
eucgb
X
EUC GB encoding = Simplified Chinese
character sets
cp936
X
X
Microsoft Simplified Chinese character sets
PRC 18030 standard
gb18030
Table 7-4 lists the traditional Chinese character set:
Table 7-4: Traditional Chinese character set
Character set Unilib required Description
cp950
X
X
PC (Microsoft) Traditional Chinese
euccns
EUC CNS encoding = Traditional Chinese
with extensions
big5
X
X
Big 5 Traditional Chinese
big5hk
Big 5 with HKSCS extensions
Table 7-5 lists the Cyrillic character set:
Table 7-5: Cyrillic character sets
Character set Unilib required Description
cp855
cp866
cp1251
iso88595
koi8
IBM PC Cyrillic
PC Russian
Microsoft Windows 3.1 Cyrillic
ISO 8859-5 Latin/Cyrillic
KOI-8 Cyrillic
Table 7-6 lists the Eastern European character set:
Table 7-6: Eastern European character sets
Character set Unilib required
Description
cp852
PC Eastern Europe
cp1250
iso88592
Microsoft Windows 3.1 Eastern European
ISO 8859-2 Latin-2
Table 7-7 lists the Greek character set:
86
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7 Customizing Localization for Adaptive Server
Table 7-7: Greek character sets
Character set Unilib required
Description
cp869
IBM PC Greek
cp1253
greek8
iso88597
MS Windows Greek
HP GREEK8
ISO 8859-7 Latin/Greek
Table 7-8 lists the Hebrew character set:
Table 7-8: Hebrew character sets
Character set Unilib required
Description
cp1255
X
X
Microsoft Windows Hebrew
ISO 8859-8 Hebrew
iso88598
Table 7-9 lists the Japanese character set:
Table 7-9: Japanese character sets
Character set Unilib required Description
cp932
eucjis
sjis
X
IBM J-DBCS:CP897 + CP301 (Shift-JIS)
EUC-JIS encoding
Shift-JIS (no extensions)
Table 7-10 lists the Korean character set:
Table 7-10: Korean character sets
Character set Unilib required
eucksc
Description
X
EUC KSC Korean encoding = CP949
Table 7-11 lists the Thai character set:
Table 7-11: Thai client character sets
Character set Unilib required
Description
tis620
cp874
X
X
TIS-620 Thai standard
Microsoft Windows Thai
Table 7-12 lists the Turkish character set:
Configuration Guide
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of localization support
Table 7-12: Turkish character sets
Character set Unilib required
Description
cp857
IBM PC Turkish
cp1254
iso88599
turkish8
Microsoft Windows Turkish
ISO 8859-9 Latin-5 Turkish
HP TURKISH8
Table 7-13 lists the Unicode character set:
Table 7-13: Unicode character set
Character set
Unilib required
Description
utf8
X
Unicode UTF-8 encoding
Table 7-14 lists the Vietnamese character set:
Table 7-14: Vietnamese character set
Character set
Unilib required
Description
cp1258
X
Microsoft Windows Vietnamese
Table 7-15 lists the Western European character set:
Table 7-15: Western European character set
Character set Unilib required
Description
ascii8
cp437
cp850
cp860
cp858
cp1252
iso_1
X
US ASCII, with 8-bit data, ISO 646
IBM CP437 - U.S. code set
IBM CP850 - European code set
PC Portuguese
X
X
X
cp850 with Euro support
Microsoft Windows US (ANSI)
ISO 8859-1 Latin-1
roman8
iso15
HP ROMAN8
X
X
ISO 8859-15 Latin-1 with Euro support
HP ROMAN8 with Euro support
roman9
88
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7 Customizing Localization for Adaptive Server
Character set conversion
Backup Server passes messages to Adaptive Server in the client’s language and
in the Adaptive Server character set. Adaptive Server then converts the
messages and issues them in the client’s language and character set. Keep the
following requirements in mind when selecting a character set:
•
In a heterogeneous environment, Adaptive Server and Backup Server may
need to communicate with clients running on different platforms and using
different character sets. To maintain data integrity, the server converts the
code between the character sets.
•
•
To use the built-in conversion, you must install the character set definition
files on the server for all the character sets being used by your clients.
Built-in conversion support is available for many character sets.
Unilib conversion support is available for all character sets supported by
Sybase. To enable Unilib conversion, you must use sp_configure and turn
enable unicode conversions on. For more information, see the System
Administration Guide.
If either Adaptive Server or Backup Server does not support a client’s language
or character set, that server issues a warning message. Errors also occur when
the Backup Server character set is not compatible with the Adaptive Server
character set.
Character set conversion is supported only between character sets for the same
language or between character sets in the same language group.
For example, automatic character set conversion is supported between the
character sets for the Western European languages: ASCII 8, CP 437, CP 850,
CP 860, CP 863, CP 1252, ISO 8859-1, ISO 8859-15, and ROMAN8.
Similarly, conversion is supported between the character sets for Japanese: CP
932, EUC-JIS, Shift-JIS, and DEC-Kanji.
However, code conversion is not supported between any of the Western
European language character sets and the Japanese character sets. For more
information about supported conversions, see the System Administration
Guide.
Conversions between server and client
If Adaptive Server does not support the client’s language or character set, the
client can connect with the server, but no character conversions occur.
Configuration Guide
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Sort orders
When a localized client application connects to Adaptive Server, the server
checks to see if it supports the client’s language and character set.
•
If Adaptive Server supports the language, it automatically performs all
character set conversions and displays its messages in the client’s language
and character set.
•
•
If Adaptive Server does not support the language, it uses the user’s default
language or Adaptive Server’s default language.
If Adaptive Server does not support the character set, it issues a warning
to the client, turns conversion off, and sets the language to U.S. English.
Sort orders
Each character set comes with one or more sort orders (collating sequences),
which are located in the sort-order definition files (.srt files). These files
accompany the character set definition files and can be found in the same
directory.
You can select a sort order for your data according to the needs at your site.
However, the server can support only one sort order at a time, so select a sort
order that will work for all of your clients.
Warning! Make all changes to the default character set and sort order for a new
Adaptive Server before creating any user databases or making any changes to
the Sybase-supplied databases. Changing the character set and sort order after
data or data structures have been added to Adaptive Server may cause incorrect
behavior. To change the character set or sort order after you have added data,
see the System Administration Guide.
Available sort orders
The sort order determines the collating sequence Adaptive Server uses to order,
compare, and index character data. Each character set comes with one or more
sort orders.
90
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7 Customizing Localization for Adaptive Server
Sort orders are located in sort order definition files (.srt files) that accompany
your character set definition files.
Note Available sort orders vary according to the character set installed on
Adaptive Server.
You can see the available sort orders for your character set by looking in the
.srt file for your language. Sort orders are stored in:
$SYBASE/charsets/<charset_name>/*.srt
For more information about localization files, see “Localization directories”
on page 94.
Table 7-16 describes the sort orders that you can specify at installation time or
at a later time using the sqlloc utility.
Table 7-16: Sort orders available in Adaptive Server
Sort order name
Description
Binary order
Sorts all data according to numeric byte values for that character set. Binary order sorts
all ASCII uppercase letters before lowercase letters. Accented or ideographic
(multibyte) characters sort in their respective standards order, which may be arbitrary.
All character sets have binary order as the default. If binary order does not meet your
needs, you can specify one of the other sort orders either at installation or at a later time
by, using the sqlloc utility.
Dictionary order, case
Case sensitive. Sorts each uppercase letter before its lowercase counterpart, including
sensitive, accent sensitive accented characters. Recognizes the various accented forms of a letter and sorts them
after the associated unaccented letter.
Dictionary order, case
insensitive, accent
sensitive
Case-insensitive dictionary sort order. Uppercase letters are equivalent to their
lowercase counterparts and are intermingled in sorting results.
Dictionary order, case
insensitive, accent
insensitive
Case-insensitive dictionary sort order. Diacritical marks are ignored.
Configuration Guide
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Sort orders
Sort order name
Description
Dictionary order, case
insensitive with
preference
Case-insensitive dictionary sort order, with case preference for collating purposes. A
word written with uppercase letters is equivalent to the same word written with
lowercase letters.
Uppercase and lowercase letters are distinguished only when you use an order by
clause. The order by clause sorts uppercase letters before it sorts lowercase.
Note Do not select this sort order unless your installation requires that uppercase letters
be sorted before lowercase letters in otherwise equivalent strings for order by clauses.
Using this sort order may reduce performance in large tables when the columns
specified in an order by clause match the key of the table’s clustered index.
Alternate dictionary
order, case sensitive
Case-sensitive alternate dictionary sort order with lowercase variants sorted before
uppercase.
Use with several of the Western European languages.
Alternate dictionary
order, case insensitive,
accent insensitive
Case-insensitive and accent-insensitive alternate dictionary sort order.
Use with several of the Western European languages.
Alternate dictionary
order, case insensitive,
uppercase preference
Case-insensitive alternate dictionary sort order with uppercase preference.
Use with several of the Western European languages.
Spanish dictionary order, Case-sensitive Spanish dictionary sort order.
case sensitive
Use with Spanish and for most Latin American locales.
Spanish dictionary order, Spanish case-insensitive dictionary sort order.
case insensitive
Use with Spanish and for most Latin American locales.
Spanish dictionary order
case insensitive, accent
insensitive
Spanish case-insensitive and accent-insensitive dictionary sort order.
Use with Spanish and for most Latin American locales.
Scandinavian dictionary
order, case sensitive
Case-sensitive dictionary sort order.
Use with Scandinavian languages.
Scandinavian dictionary
order, case insensitive,
uppercase preference
Case-insensitive and accent-insensitive dictionary sorting, with uppercase preference.
Use with Scandinavian languages.
To see the sort orders that are available, use sqlloc to display the sort orders for
the character sets you plan to use. For more information on unicode sort orders
for utf_8, see Chapter 7, “Configuring Character Sets, Sort Orders, and
Languages” in the System Administration Guide.
92
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7 Customizing Localization for Adaptive Server
Language modules
If you want Adaptive Server error messages to be displayed in a language other
than U.S. English (us_english), you must install the appropriate language
module.
When you install a new language module, installation automatically loads the
language into the Sybase installation directory to support the new language.
For information about directories, see “Localization directories” on page 94.
Installing a new language module
A full Adaptive Server installation includes all the language components
automatically. If you did not select a full install, you must install additional
language modules manually.
To install a new language module:
1
2
Load the language module software from the distribution media. You must
load this software into the same directory in which you loaded Adaptive
Server.
Reconfigure the language and, if necessary, the character set and sort order
for Adaptive Server. For instructions, see “Changing the localization
configuration” on page 97.
Message languages
For messages, U.S. English is installed as the default language in Adaptive
Server. The following rules apply to language modules:
•
•
During Adaptive Server installation or reconfiguration, you can specify a
default language other than U.S. English. However, you must have
installed the language module for the language you specify.
If your clients require Adaptive Server messages in a language other than
U.S. English, you must load the language module for those languages.
Then, you can configure Adaptive Server to the language used by your
clients.
•
If Adaptive Server does not support messages in a client’s language, these
clients receive messages in the server default language.
Configuration Guide
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Localization
For example, if your client’s language is Latin, the Spanish language
module is installed, and Spanish is specified as the Adaptive Server default
language, the client receives messages in Spanish.
Localization
By default, the Adaptive Server and Backup Server configurations use the
English locale settings, which include:
•
•
•
Character set definition files for Western European character sets
Sort-order definition files for Western European character sets
U.S. English system message files
During the installation process or through reconfiguration, you can specify a
different language, character set, and sort order.
Localization directories
Sybase localization configuration involves the following directories:
•
•
locales
charsets
The table below illustrates the structure of the localization files. It does not
show a complete list of all the files.
%SYBASE%\ or
$SYBASE/
charsets
charset_name
charset_name...
unicode
*.srt files
charset.loc
*.uct files
locales
language_name
language_name...
locales.dat
charset_name
charset_name...
message
language_name
language_name...
94
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7 Customizing Localization for Adaptive Server
About the directory
The $SYBASE/locales directory contains a subdirectory for each available
language. Each language subdirectory contains a subdirectory for each
character set available with that language.
•
The .loc files in these subdirectories enable Adaptive Server or Backup
Server to report errors in a specific language, encoded in a specific
character set.
There are a variety of .loc files in each subdirectory. Most of these files
contain translated error messages for a specific product or utility.
•
•
The common.loc file in each subdirectory contains localized information,
such as local date, time, and currency formatting, that is used by all
products.
The locales.dat file contains entries that associate platform-specific locale
names with Sybase language and character set combinations.
About the charsets directory
The files in $SYBASE/charsets/charset_name contain information related to
each particular character set, such as the definition of the character set and any
sort orders available for that character set.
About the locales.dat file
You can edit the locales.dat file to:
•
•
Change the default language or character set for a platform, or
Add new associations between platform locale names and Sybase
language and character set names.
Format of locales.dat file entries
Each entry in the locales.dat file links a platform-specific locale definition to a
Sybase language and character set combination. Each entry has the following
format:
locale = platform_locale, syb_language, syb_charset
where:
Configuration Guide
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Localization
•
platform_locale is the platform-specific keyword for a locale. For
acceptable values, see your operating system documentation.
When the locale being defined as the default for the site, platform_locale
is “default.”
•
•
syb_language is the name of the language directory to be used from within
$SYBASE/locales/language_name.
syb_charset is the character set name that determines the character set
conversion method and identifies the directory location of the message
files for clients from within
$SYBASE/locales/language_name/charset_name.
For example, the following entry specifies that the default locale uses
us_english for the language and iso_1 for the character set:
locale = default, us_english, iso_1
How client applications use locales.dat
Client applications use the locales.dat file to identify the language and
character set to use. The connection process follows these steps:
1
When a client application starts, it checks the operating system locale
setting and then checks the locales.dat file to see if that setting is
appropriate for Adaptive Server. For example, a locale entry for French
can look like the following:
locale = fr_FR, french, iso_1
2
3
When the client connects to Adaptive Server, the language and character
set information is passed to Adaptive Server in the login record.
Adaptive Server then uses:
•
•
The character set information, for example, iso_1, to identify the
client’s character set and verify whether it can convert character data
to this character set
The language (in the preceding example, French) and character set
information to see if it has messages in the client’s language
Note Adaptive Server software includes some locale entries already defined in
the locales.dat file. If these entries do not meet your needs, you can either
modify them or add new locale entries.
96
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7 Customizing Localization for Adaptive Server
Editing the locales.dat file
Before beginning the edit, make a copy of the original file, in case you have
problems with the resulting edited version.
To edit the locales.dat file:
1
2
Open the locales.dat file copy in a text editor.
Find the section enclosed in brackets:
•
•
•
For Sun Solaris, [sun_svr4]
For HP, [hp ux]
For IBM, [aix]
3
Make sure the section contains an entry for the language (syb_language)
and character set (syb_charset) combination that you want to use.
Note The value for platform_locale must match the value required by
your operating system. If the locales definitions in your system
configuration files do not match the Sybase locale definitions, your
applications will not run properly.
For example, if you want your Open Client messages to appear in French,
and Adaptive Server is using the ROMAN8 character set, you would
check the locales.dat entries for your platform and look for the following
entry:
locale = fr_FR, french, roman8
Add the required entry or modify an existing entry.
Save the changes, if any, and exit the text editor.
4
5
Changing the localization configuration
By default, the Adaptive Server and Backup Server configurations uses the
English locale settings localization, which include:
•
•
•
Character set definition files for Western European character sets
Sort order definition files for Western European character sets
us_english system message files
Configuration Guide
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the localization configuration
During the installation process and through reconfiguration, you can specify a
different language, character set, and sort order.
Adaptive Server localization
Each language uses about 2MB of database space per module. If necessary, use
the alter database command to increase the size of the master database before
adding another language.
Note If you want to install more than one language on Adaptive Server, and
the master database is not large enough to manage more than one language, the
transaction log may become too full. You can expand the master database only
on the master device. For more information, see the System Administration
Guide.
1
2
Source SYBASE.csh or SYBASE.sh if you have not set up the Sybase
environment variables.
To configure localization for Adaptive Server on the server, start sqlloc:
$SYBASE/$SYBASE_ASE/bin/sqlloc
3
4
5
6
Select Localize an Existing Server.
From the Adaptive Server selection window, select the server.
Supply the user name and password. The user must have “sa” privileges.
Next, supply:
•
•
•
the default language
the default character set
default sort order
7
8
Select any other languages you want to install. You may select only
languages that are supported by the default character set.
The Add and Remove Languages window lists all Sybase supported
languages.
The Localization Summary window summarizes the configuration options
you selected. Click OK to confirm your selections.
The Status Output window notifies you upon completing the installation.
98
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7 Customizing Localization for Adaptive Server
Backup Server localization
You can change the Backup server language and character set by modifying the
RUN_<backup_server_name> file. See the Utility Guide for more information
on the backupserver command arguments.
Configuring Adaptive Server for other character sets
To configure Adaptive Server with the character set and sort order for your
language, complete the following steps. Your system messages appear in the
default language, English.
1
Use the charset utility to load the default character set and sort order.
To use charset, the server must be running and you must have System
Administrator privileges. Use the file name of the sort order:
$SYBASE/$SYBASE_ASE/bin/charset -Usa -Ppassword
Replace sort_order_file with the name of the sort order file. See Table 7-
17 on page 100. Replace character_set with the Sybase name for your
character set. See Table 7-18 on page 101.
2
Use charset utility to load any additional character sets. See “charset
utility” on page 102 for more about this utility.
To use the Adaptive Server built-in character set conversions, you must
load the character set definition files for all the characters set on your client
platforms. If you are using the Unilib character set conversions, you do not
need to do this.
3
4
Using isql, log in to your server as “sa” and select the master database.
1> use master
2> go
Use the ID of the sort order to configure your server for the new character
set and sort order.
1> sp_configure "default sortorder_id",
2> sort_order_id, "character_set"
3> go
Replace sort_order_id with the ID for your sort order. See Table 7-17 on
page 100. Replace character_set with the Sybase name for your character
set. See Table 7-18 on page 101.
5
Shut down the server to start the reconfiguration process.
Configuration Guide
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the localization configuration
6
7
Use your normal process on your UNIX system to reboot the server,
usually by invoking one of the RUN_xxx scripts from
$SYBASE/$SYBASE_ASE/install.
The server starts, rebuilds all the system indexes, then shuts down. Restart
a second time to bring the server up in a stable state.
Sort orders
Table 7-17 describes the available sort orders. If your language does not
appear, then there is no language-specific sort order for your language—use a
binary sort order.
Table 7-17: Available sort orders
Language or script
All languages
Cyrillic
Sort orders
File name
binary.srt
ID
50
63
64
51
52
53
Binary order
Dictionary order, case sensitive, accent sensitive
Dictionary order, case sensitive, accent sensitive
Dictionary order, case sensitive, accent sensitive
Dictionary order, case insensitive, accent sensitive
cyrdict.srt
cyrnocs.srt
dictiona.srt
nocase.srt
nocasepr.srt
English
French
German
Dictionary order, case insensitive, accent sensitive,
with preference
These sort orders work with all
Western European character sets.
Dictionary order, case insensitive, accent insensitive noaccent.srt
54
English
French
German
Alternate dictionary order, case sensitive
altdict.srt
45
39
Alternate dictionary order, case sensitive, accent
insensitive
altnoacc.srt
Alternate dictionary order, case sensitive, with
preference
altnocsp.srt
elldict.srt
46
65
These sort orders work only with CP
850.
Greek
Dictionary order, case sensitive, accent sensitive
This sort order works only with ISO
8859-7.
Hungarian
Dictionary order, case sensitive, accent sensitive
Dictionary order, case insensitive, accent sensitive
hundict.srt
69
70
71
58
59
hunnoac.srt
These sort orders work only with
ISO 8859-2.
Dictionary order, case insensitive, accent insensitive hunnocs.srt
Russian
Dictionary order, case sensitive, accent sensitive
Dictionary order, case insensitive, accent sensitive
rusdict.srt
rusnocs.srt
This sort order works with all
Cyrillic character sets except for CP
855.
100
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7 Customizing Localization for Adaptive Server
Language or script
Sort orders
File name
ID
Scandinavian
Dictionary order, case sensitive, accent sensitive
Dictionary order, case insensitive, with preference
scandict.srt
47
scannocp.srt 48
These sort orders work only with CP
850.
Spanish
Dictionary order, case sensitive, accent sensitive
Dictionary order, case insensitive, accent sensitive
espdict.srt
espnocs.srt
55
56
57
Dictionary order, case insensitive, accent insensitive espnoac.srt
Thai
Dictionary order
dictionary.srt 51
Turkish
Dictionary order, case sensitive, accent sensitive
turdict.srt
72
73
74
Dictionary order, case insensitive, accent insensitive turnoac.srt
Dictionary order, case insensitive, accent sensitive turnocs.srt
These sort orders work only with
ISO 8859-9.
Character sets
Table 7-18 lists the supported character sets and their Sybase name.
Table 7-18: Sybase character set names
Character sets
ASCII 8
Big 5
Sybase name
acsii_8
big5
Big 5HK
CP 437
CP 850
CP 852
CP 855
CP 857
CP 858
CP 860
CP 864
CP 866
CP 869
CP 874
CP 932
CP 936
CP 950
CP 1250
CP 1251
CP 1252
big5hk
cp437
cp850
cp852
cp855
cp857
cp858
cp860
cp864
cp866
cp869
cp874
cp932
cp936
cp950
cp1250
cp1251
cp1252
Configuration Guide
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the localization configuration
Character sets
Sybase name
cp1253
cp1254
cp1255
cp1256
cp1257
cp1258
deckanji
euccns
CP 1253
CP 1254
CP 1255
CP 1256
CP 1257
CP 1258
DEC Kanji
EUC-CNS
EUC-GB
EUC-JIS
eucgb
eucjis
EUC-KSC
GB 18030
GREEK8
ISO 8859-1
ISO 8859-2
ISO 8859-5
ISO 8859-6
ISO 8859-7
ISO 8859-8
ISO 8859-9
ISO 8859-15
Koi8
eucksc
gb18030
greek8
iso_1
iso88592
iso88595
iso88596
iso88597
iso88598
iso88599
iso15
koi8
ROMAN8
ROMAN9
Shift-JIS
roman8
roman9
sjis
TIS 620
tis620
TURKISH8
UTF-8
turkish8
utf8
charset utility
Use the charset utility to load character sets and sort orders into Adaptive
Server. If you are using charset to load the default character set and sort order,
this should be done only at the time of installation.
To change the default character set and sort order of Adaptive Server, see the
System Administration Guide.
102
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7 Customizing Localization for Adaptive Server
Syntax
charset
[ -U username ]
[ -P password ]
[ -S server ]
[ -I interfaces ]
[ -v version ]
sort_order
[ charset ]
Table 7-19: Keywords and options for charsets
Keywords
and options Description
-U
-P
-S
If you are not already logged in to your operating system as “sa”, you must specify “-Usa” or
“/username = sa” in the command line.
Specifies the “sa” password on the command line. If not specified, the user is prompted for the “sa”
password.
Specifies the name of the server. If not specified, charset uses the DSQUERY environment variable
to identify the server name. If there is no DSQUERY environment variable, charset attempts to
connect to a server named “SYBASE.”
-I
Specifies the interfaces file to use. If not specified, charset uses the interfaces file in the SYBASE
directory.
-v
Causes the Sybase version string to be printed, then exits. Use with no other options specified.
sort_order
When charset is used to load the default character set and sort order, sort_order is a mandatory
parameter specifying the name of the sort order file to be used by Adaptive Server. When loading
additional character sets, use charset.loc to indicate the name of the character set files.
charset
Specifies the directory of the character set to be used by Adaptive Server.
Configuration Guide
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the localization configuration
104
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
8
Logging Error Messages and
Events
Server.
Topic
Page
105
Adaptive Server error logging
Setting error log paths
Managing messages
106
107
Adaptive Server error logging
Each time Adaptive Server starts, it writes information to a local error log
file, called the Adaptive Server error log:
$SYBASE/$SYBASE_ASE/install/server_name.log
This file:
•
Stores information about the success or failure of each start-up
attempt.
•
Logs error and informational messages generated by the server during
its operations.
•
•
Remains open until you stop the server process.
Contains startup messages from Adaptive Server
Note When you want to make more disk space available by reducing the
size of the error log, stop Adaptive Server before deleting logged
messages. The log file cannot release its memory space until Adaptive
Server has stopped.
Configuration Guide
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting error log paths
Enabling and disabling error logging
Logging to the Adaptive Server error log is always enabled. However, when
you create or modify a specific user-defined message, you can set it to be
omitted from the log. See “Logging user-defined messages” on page 107.
Setting error log paths
The installation program sets the error log location in the Sybase installation
directory when you configure a new Adaptive Server. Backup Server and
Monitor Server each have their own error logs.
The default location for each server’s error log is:
•
•
•
Adaptive Server: $SYBASE/$SYBASE_ASE/install/servername.log
Backup Server: $SYBASE/$SYBASE_ASE/install/servername_back.log
Monitor Server: $SYBASE/$SYBASE-ASE/install/servername_ms.log
At start-up, you can reset the name and location of the Adaptive Server error
log file from the command line. Use the -e start-up parameter and value in the
dataserver command to start Adaptive Server.
Note Multiple Adaptive Servers cannot share the same error log. If you install
multiple Adaptive Servers, specify a unique error log file name for each server.
Setting the Adaptive Server error log path
You can change the error log path by editing the
$SYBASE/$SYBASE_ASE/install/RUN_server_name file.
For example, to change the error log path from
$SYBASE/$SYBASE_ASE/bin/dataserver -d/Devices/ASE_2K.dat -sASE_2K -
the $SYBASE directory, type:
$SYBASE/ASE-15_0/bin/dataserver -d/Devices/ASE_2K.dat
-sASE_2K -i/ASE_150 -e$SYBASE/ASE_2K.log -M/ASE_150
For information about using the RUN_server_name file, see “Starting and
Stopping Servers” on page 17.
106
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 8 Logging Error Messages and Events
Managing messages
When event logging is enabled, you can manage its functions in the following
ways:
•
Use sp_addmessage or sp_altermessage to control whether a specific
user-defined message is logged in the Adaptive Server error log.
For the complete syntax for sp_addmessage and sp_altermessage, see the
Reference Manual.
•
Use configuration parameters to specify whether auditing events are
logged. Auditing events pertain to a user’s success, log audit logon success,
or failure, log audit logon failure, in logging in to Adaptive Server.
Logging user-defined messages
You can specify whether a user-defined message is logged to the Adaptive
Server error log. Adaptive Server lets you make this determination for:
•
•
New messages (sp_addmessage).
Existing messages (sp_altermessage).
For more information about these commands and their parameters, see
sp_addmessage and sp_altermessage in the Reference Manual.
New messages
Include the with_log option in sp_addmessage when you add a new user-
defined message to sysusermessages. This parameter sets the Adaptive Server
to log the message each time that the message appears.
Existing messages
Include the with_log option in sp_altermessage to change an existing user-
defined message. This parameter alters the reporting status of that message:
•
•
TRUE – to enable logging.
FALSE – to disable logging.
Configuration Guide
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing messages
Logging auditing events
By default, Adaptive Server does not log auditing events. However, you can
use sp_configure parameters to specify whether Adaptive Server is to log
auditing events, such as logins, to the Adaptive Server error log.
Possible parameters and values are:
•
•
•
log audit logon success at 1 – to enable logging of successful Adaptive
Server logins:
sp_configure "log audit logon success", 1
log audit logon failure at 1 – to enable logging of unsuccessful Adaptive
Server logins:
sp_configure "log audit logon failure", 1
Either parameter at 0 – to disable logging of that message type:
sp_configure "log audit logon success", 0
sp_configure "log audit logon failure", 0
For more information about sp_configure, see the System Administration
Guide.
108
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R
9
Managing Adaptive Server
Databases
The administration of Adaptive Server databases includes both routine
tasks and performance and tuning considerations.
•
administrative tasks in detail.
•
The Performance and Tuning Guide provides in-depth explanations
of performance issues.
Topic
Managing database devices
Page
109
Managing database devices
The term database device refers to a disk or a portion of a disk that stores
Adaptive Server databases and database objects.
Device requirements
Adaptive Server devices and databases are subject to the following limits:
•
The maximum device size is 4TB.
•
The minimum usable device size depends on the servers logical page
size. Databases manage space in groups of 256 logical pages, and the
smallest specifiable disk piece size is 1MB, so the smallest usable
device is the larger of 1MB or 256 logical pages:
•
•
•
The minimum device size for a 2K page server is 1MB
The minimum device size for a 4K page server is 1MB
The minimum device size for an 8K page server is 2MB
Configuration Guide
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing database devices
•
The minimum device size for a 16K page server is 4MB
•
The maximum number of database devices is 2,147,483,647. However,
Adaptive Server must retain a description of each device in memory, so in
practice this number is limited by your system’s memory. Your operating
system also limits how many devices one program can open
simultaneously.
•
A database can contain up to 2,147,483,648 logical pages, so its maximum
size depends on its logical page size:
•
•
•
•
The maximum database size on a 2K page server is 4TB.
The maximum database size on a 4K page server is 8TB.
The maximum database size on an 8K page server is 16TB.
The maximum database size on a 16K page server is 32TB.
•
•
The minimum database size is the size of the installation’s model database.
Each database is stored on one or more database devices, in one or more
disk pieces. The maximum number of disk pieces in one database is 8,
388,608. However, Adaptive Server must retain a description of all active
databases, so in practice this number is also limited by your operating
system memory.
Note By default, srvbuild creates the devices in $SYBASE/data directory.
Creating files for database devices
You can create new database devices using the disk init command. You can
specify a raw partition or operating system file. When using a raw partition,
you must specify the full path to the partition. When using an operating system
file, you may use the full path or a relative path. Path names are relative to your
server’s current working directory.
Sybase recommends that you specify the full path to all database devices. Do
not use environment variables when specifying path names with disk init.
Here is an example of creating a database device using disk init:
disk init name = "user_device1",
physname = "/work/data/device1.dat",
size = 2048
110
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 9 Managing Adaptive Server Databases
In this example, "size = 2048"tells the command to allocate 2048 “virtual”
pages to the device. A virtual page is 2048 bytes, so this command creates a
4MB device.
The example command does not specify a device number, instead letting the
server choose one. Unless you need to assign a specific number to a given
device, Sybase recommends you use this method. If you do need an explicit
device number, use the parameter "vdevno = N", where N is the device
number you want to use. If you specify a device number, that number must not
be in use by any other device on this server. Use sp_helpdevice to see what
device numbers have already been used.
If you find an existing database device is too small, you can make that device
larger using the disk resize command. This command takes the same “name”
and “size” parameters as disk init,except that the “size” parameter specifies how
much larger you want the device to be.
Note Operating system constraints will limit how much larger you can make
any given device. For example, you cannot make a device on a UNIX raw
partition larger if you have already allocated the full defined size of that
partition.
For more information about sp_helpdevice and disk init command, see the
System Administration Guide and the Reference Manual.
For more information about device files, see the Performance and Tuning
Guide.
Configuration Guide
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing database devices
112
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A P T E R 1 0
Adding Optional Functionality to
Adaptive Server
This chapter provides instructions for adding optional functionality to
Adaptive Server:
Topic
Page
113
Adding auditing
Installing online help for Transact-SQL syntax
121
After you have installed the Sybase products on your system, see the
product documentation for configuration and administration issues.
Adding auditing
Auditing is an important part of security in a database management
system. Security-related system activity is recorded in an audit trail, which
can be used to detect penetration of the system and misuse of resources.
By examining the audit trail, the System Security Officer can inspect
patterns of access to objects in databases and can monitor the activity of
specific users. Audit records can be traced to specific users, enabling the
audit system to act as a deterrent to users who are attempting to misuse the
system.
A System Security Officer manages the audit system and is the only user
who can start and stop auditing, set up auditing options, and process audit
data.
Audit system devices and databases
The audit system includes several components. The main components are:
•
The sybsecurity device and the sybsecurity database, which stores
audit information
Configuration Guide
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding auditing
•
•
The audit trail, which consists of several audit devices and tables that you
determine at configuration time
The syslogs transaction log device, which stores transaction logs
The sybsecurity
device and database
The sybsecurity device stores the sybsecurity database. The sybsecurity
database is created as part of the auditing configuration process. It contains all
the system tables in the model database, as well as a system table for keeping
track of server-wide auditing options and system tables for the audit trail.
Tables and devices for
the audit trail
Adaptive Server stores the audit trail in system tables, named sysaudits_01
through sysaudits_08. At any given time, only one of the audit tables is current.
Adaptive Server writes all audit data to the current audit table. A System
Security Officer can use sp_configure to set or change which audit table is
current.
When you configure Adaptive Server for auditing, you determine the number
of audit tables for your installation. You can specify up to eight system tables
(sysaudits_01 through sysaudits_08). Plan to use at least two or three system
tables for the audit trail and to put each system table on its own device, separate
from the master device. If you do this, you can use a threshold procedure that
archives the current audit table automatically, before it fills up and switches to
a new, empty table for subsequent audit records.
Device for syslogs
systems table
During auditing configuration, you must specify a separate device for the
syslogs system table, which contains the transaction log. The syslogs table,
which exists in every database, contains a log of transactions that are executed
in the database.
Overview of audit installation
There are two methods for installing auditing for the first time in Adaptive
Server:
•
Use the installsecurity script. For information, see the System
Administration Guide.
•
Use the auditinit utility. Tasks that you must perform before installing
auditing and instructions on using the auditinit utility follow.
114
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 10 Adding Optional Functionality to Adaptive Server
Pre-installation tasks for auditing devices
Determine the location of the raw devices for the sybsecurity, syslogs, and
sysaudits table devices. You will need to provide this information later.
Sybase recommends that you:
•
•
•
Configure your system with the minimum number of auditing devices you
require—you must configure at least three devices. You can add more
auditing devices later with sp_addaudittable. For information, see the
Reference Manual.
Install auditing tables and devices in a one-to-one ratio. Tables that share
the same device will share the same upper threshold limit. These tables
cannot be used sequentially when a device fills up, because they both
reside on the same device.
Install each auditing table on its own device. This enables you to set up a
smoothly running auditing system with no loss of auditing records. With
two auditing tables, when one fills up, you can switch to the other. With a
third auditing table, if one device fails, the System Security Officer can
install a new threshold procedure that changes the device rotation to skip
the broken device until the device is repaired.
•
Make the device larger than the table. When you use only three auditing
tables and devices, the size of the table and the size of the device can be
similar, because you can obtain more auditing capacity by adding more
auditing tables and devices (up to eight). When you are working toward
the upper table and device limit (six to eight), you may want to make the
device considerably larger than the table. Then, you can expand the table
size later towards the upper size of the device when a larger auditing
capacity is desired, and few or no device additions are available.
Installing auditing
v
Configuring Adaptive Server for auditing
1
Source SYBASE.csh or SYBASE.sh file if you have not setup the Sybase
environment variables.
2
Start auditinit at the UNIX prompt:
$SYBASE/$SYBASE_ASE/install/auditinit
auditinit displays the following menu:
AUDITINIT
Configuration Guide
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding auditing
1. Release directory: /usr/u/sybase
2. Configure a Server product
3
4
5
6
7
8
Select Configure a Server Product.
Select Adaptive Server.
Select Configure an Existing Sybase Server.
Select the server to configure.
Provide the SA password for the server you selected.
From the Sybase Server Configuration screen, select Configure Auditing.
As you proceed through the menus in auditinit, you can change any default
values that appear. As you finish each menu, press Ctrl+A to accept the
defaults or changed values and move to the next menu.
CONFIGURE AUDITING
1. Configure auditing: no
2. Add a device for audit table(s)
3. Add a device for the audit database transaction log
4. Delete a device entry
5. Change a device entry
List of devices for the audit tables:
Logical name
Physical name
Segment name
Table name
Table name
Size
Size
Device for the audit datbase transaction log:
Logical name
Physical name
Segment name
9
From the Configure Auditing screen, select Configure Auditing.
auditinit redisplays the Configure Auditing menu with the value “yes”
displayed for Configure Auditing.
10 Restart Adaptive Server for the changes to take effect.
v
Creating a device for an audit table
1
From the Configure Auditing screen, select Add a Device for Audit
Table(s).
auditinit displays the following menu:
ADD/CHANGE A NEW DEVICE FOR AUDITING
1. sybsecurity physical device name:
2. Logical name of the device:
3. Size of the device (Meg):
4. Device size for auditing:
116
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 10 Adding Optional Functionality to Adaptive Server
2
Select Sybsecurity Physical Device Name.
To create a device for an audit table:
1
Enter the full path of the physical device (raw partition) that you located
in “Pre-installation tasks for auditing devices” on page 115.
Enter the physical name of the device to use for the
audit database (default is " "):
/dev/path_to_partition
where path_to_partition is the path to the raw partition for the device.
If you specify an operating system file, the following warning appears:
WARNING: '/secret1/sybase_dr/install/aud1.dat' is a
regular file which is not recommended for a Server
device.
2
Press Return to acknowledge the warning.
auditinit redisplays the Add/Change a New Device for Auditing menu,
which displays the physical name of the device:
ADD/CHANGE A NEW DEVICE FOR AUDITING
1. sybsecurity physical device
name: /secret1/sybase_dr/install/aud1.dat
2. Logical name of the device:
3. Size of the device:
4. Device size for auditing:
3
4
Proceed through the remaining items on this menu.
Note The Size of the Device value must be equal to or greater than the
Device Size for Auditing value. The Device Size for Auditing must be
equal to the device size. If you are following Sybase auditing guidelines,
you do not need to change the value displayed in Device Size for Auditing.
Press Ctrl+A to accept the settings. auditinit returns to the Configure
Auditing menu and displays the device you have created.
CONFIGURE AUDITING
1. Configure auditing: yes
2. Add a device for audit table(s)
3. Add a device for the audit database transaction log
4. Delete a device entry
5. Change a device entry
Configuration Guide
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding auditing
List of devices for the audit tables:
Logical name Physical name Segment name
Table name
Size
6.Audit_01' secret1/sybase_dr/install/aud1.dat’ sysaudits_01 5
To add multiple audit devices, repeat steps 1– 6.
5
You can add as many as eight devices. Sybase recommends adding three
or more audit table devices.
After adding a device, auditinit returns to the Configure Auditing menu and
displays all the devices you have created.
CONFIGURE AUDITING
1. Configure auditing: yes
2. Add a device for audit table(s)
3. Add a device for the audit database transaction log
4. Delete a device entry
5. Change a device entry
List of devices for the audit tables:
Logical name
name Size
Physical name
Segment name
Table
6. Audit_01' /secret1/sybase_dr/install/aud1.dat’ sysaudits_01 5
7. Audit_02' /secret1/sybase_dr/install/aud2.dat' sysaudits_02 5
v
Creating a device for the audit database transaction log
1
From the Configure Auditing menu, select Add a Device for the Audit
Database Transaction Log.
auditinit displays the Add/Change a New Device for Auditing menu.
ADD/CHANGE A NEW DEVICE FOR AUDITING
1. sybsecurity physical device name:
2. Logical name of the device:
3. Size of the new device (Meg):
4. Device size for auditing:
2
Select Sybsecurity Physical Device Name.
auditinit prompts for the physical name and supplies you with a default, if
available:
Enter the physical name of the device to use for the
sybsecurity database (default is''):
/dev/path_to_partition
118
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 10 Adding Optional Functionality to Adaptive Server
where path_to_partition is the path to the raw partition for the device.
Enter the full path name of a physical device.
3
4
If you enter an operating system file name, the following warning appears:
WARNING: '/secret1/sybase_dr/install/audlog' is a
regular file, which is not recommended for a Server
device.
Press Return to acknowledge this warning.
auditinit displays the Add/Change a New Device for Auditing menu and
the value you selected for the physical name of the device.
ADD/CHANGE A NEW DEVICE FOR AUDITING
1.sybsecurity physical device name:
/secret1/sybase_dr/install/auditlog.dat
2.Logical name of the device:
3.Size of the device:
4.Device size for auditing:
5
Proceed through the remaining items on this menu. As you do so, be aware
of the following:
•
•
•
Sybase recommends a minimum size of 2MB for the size of the
transaction log.
auditinit displays the size in both Size of the Device and in Device Size
for Auditing in the Add/Change a New Device for Auditing menu.
The Device Size for Auditing default value is equal to the size of the
device, based on the assumption that you may want to devote the
entire device to log for the auditing task. If you want to use only a
subset of the device, you can edit the Size of the Device value.
6
Press Ctrl+A to accept the settings displayed in the Add/Change a New
Device for Auditing menu.
auditinit returns to the Configure Auditing menu and displays all the
devices you have created.
CONFIGURE AUDITING
1. Configure auditing: yes
2. Add a device for audit table(s)
3. Add a device for the audit database transaction log
4. Delete a device entry
5. Change a device entry
List of devices for the audit tables:
Configuration Guide
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding auditing
Logical name
name Size
Physical name
Segment name
Table
6. Audit_01' /secret1/sybase_ dr/install/aud1.dat’ sysaudits_01 5
7. Audit_02' /secret1/sybase_ dr/install/aud2.dat' sysaudits_02 5
8. auditlog
/secret1/.../auditlog.dat logsegment syslogs
2
7
8
When you are ready to execute the audit configuration, press Ctrl+A.
auditinit returns you to the Sybase Server Configuration screen.
Press Ctrl+A again. auditinit prompts with:
Execute the Sybase Server Configuration now?
Enter “y” (yes).
9
auditinit executes the tasks to install auditing. When the installation
completes successfully, the following messages are displayed:
Running task: install auditing capabilities.
....................Done
Auditing capability installed.
Task succeeded: install auditing capabilities.
Configuration completed successfully.
Press <return> to continue.
Enabling auditing
After auditing is installed, no auditing occurs until a System Security Officer
enables auditing with sp_configure. For more information, see the System
Administration Guide.
v
v
Deleting a device entry
1
2
3
Select Delete a Device Entry from the Configure Auditing menu.
Enter the number of the device to delete.
Press return.
Changing a device entry
1
2
Select Change a Device Entry from the Configure Auditing menu.
Enter the number of the device to change.
auditinit displays the Add/Change a New Device for Auditing menu with
information on the device you selected:
ADD/CHANGE A NEW DEVICE FOR AUDITING
1. sybsecurity physical device name:
/secret1/sybase_dr/install/audlog
2. Logical name of the device: aud.log
120
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 10 Adding Optional Functionality to Adaptive Server
3. size of the new device (Meg): 5
4. Device size for auditing:5
3
4
Select each remaining entry you want to change.
Press Ctrl+A to save the new entries.
Installing online help for Transact-SQL syntax
This section provides instructions for installing online help for Transact-SQL
syntax.
Online syntax help: sp_syntax
The $SYBASE/$SYBASE_ASE/scripts directory contains scripts for installing
the syntax help database, sybsyntax. You can retrieve this data with sp_syntax.
For more information on sp_syntax, see the Reference Manual.
The scripts directory contains one or more of the sp_syntax scripts shown in
Table 10-1, depending on which Sybase products are included with your
server:
Table 10-1: sp_syntax installation scripts
Script
Product
ins_syn_cl
ins_syn_esql
ins_syn_os
ins_syn_sql
Open Client Client-Library™
Embedded SQL™
Open Server
Transact-SQL
All Adaptive Server installations include the ins_syn_sql script. This script
includes syntax information for Transact-SQL, the system procedures, and the
Sybase utilities. When you execute this script, you install the SQL portion of
the sybsyntax database.
Configuration Guide
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing online help for Transact-SQL syntax
You can install any of these scripts, depending on the need for Sybase
information on your server. The first script you execute creates the sybsyntax
database and the needed tables and indexes. Any scripts that you execute after
the first one add to the existing information in the database. If you execute a
script that was executed previously, the previously installed rows of
information are deleted from the table in the database and then reinstalled.
Warning! The ins_syn_cl and ins_syn_os scripts conflict. If you execute both
scripts, errors occur.
Default device for the sybsyntax database
The sybsyntax database requires 3MB on your database device. By default, the
sybsyntax installation scripts install the sybsyntax database on the device that is
designated as the default database device.
If you have not used sp_diskdefault to change the status of the master device
(which is installed as the default disk) or to specify another default device, the
scripts install sybsyntax on the master device. Sybase does not recommend this
configuration because sybsyntax uses valuable space, which is best left
available for future expansion of the master database.
To avoid installing sybsyntax on the master device, do one of the following:
Use sp_diskdefault to specify a default device other than the master device. For
information about sp_diskdefault, see the Reference Manual.
•
Modify each sybsyntax installation script that you plan to execute to
specify a different device, as explained in the following section.
Installing sybsyntax
For each sybsyntax installation script you want to execute:
1
Determine the type (raw partition, logical volume, operating system file,
and so on) and location of the device where you plan to store the sybsyntax
database. You will need to provide this information later.
2
Make a copy of the original script. Be sure you can access this copy, in
case you experience problems with the edited script.
122
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Use a text editor to edit the script, if necessary, to change the default device
from the master device to the device created in step 1. For information on
the default device, see “Default device for the sybsyntax database” on
page 122.
•
Comment out the following section, which specifies the default
device:
/* create the database, if it does not exist */
if not exists (select name from sysdatabases
where name = "sybsyntax")
begin
/* create the sybsyntax table if it doesn’t exist */
/* is the space left on the default database
devices > size of model? */
if (select sum (high-low +1) from sysdevices where status
& 1 = 1) - (select sum(size) from sysusages, sysdevices
where vstart >= sysdevices.low
and vstart <= sysdevices.high
and sysdevices.status &1 = 1) >
(select sum(sysusages.size) from sysusages
where dbid = 3)
begin
create database sybsyntax
end
else
begin
print "There is not enough room on the default
devices to create the sybsyntax database."
return
end
end
•
After you have commented out this entire section, add a line like this
to the script:
create database sybsyntax on device_name
where device_name is the name of the device where you want to
install sybsyntax.
4
Execute the script with a command like the following:
isql -Usa -Ppassword -Sservername <
$SYBASE/$SYBASE_ASE/scripts/ins_syn_sql
where sa is the user ID of the System Administrator, password is the
System Administrator’s password, and servername is the Adaptive Server
where you plan to install the database.
Configuration Guide
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing online help for Transact-SQL syntax
If you have set the DSQUERY environment variable to the servername,
you can replace the server name with $DSQUERY.
5
To ensure that you have installed the sybsyntax database and that it is
working correctly, use isql to log in to the server on which you installed the
database, and execute sp_syntax. For example:
isql -Usa -Ppassword -Sservername
1> sp_syntax "select"
2> go
Adaptive Server displays a list of commands that contain the word or word
fragment “select.”
124
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Sybase system
API component in interfaces file
described 56
Arabic character sets 85
asynchronous I/O (AIO)
enabling 38, 39, 40
HP driver 38, 39
audit system 113
audit trail
overview 113
system audit tables 114
3
Symbols
::= (BNF notation)
in SQL statements xiv
, (comma)
in SQL statements xiv
{} (curly braces)
in SQL statements xiv
() (parentheses)
in SQL statements xiv
[ ] (square brackets)
in SQL statements xiv
device for 114
global options 114
A
accented letters 13, 91
Adaptive Server
character set, changing 83
character sets 89
client communications with 49
conversions between, and clients 89
customizing features 47
recommended database device size
tables for tracking 114
9
auditinit utility
database device requirements
default character set 83
default configuration 47, 48
default sort order 83
error log path 106
language, changing 83
naming in interfaces file 56
shutting down 24
9
Backup Server
starting from UNIX command line 18
Backup Server, default, for Adaptive Server 48
binary sort order 91
BNF notation in SQL statements xiii, xiv
Bourne shell 29
brackets. See square brackets [ ]
buffer specifications 15
sort order 83
starting from UNIX command line 18
starting with operating system 20
start-up script 22
adding a server, LDAP 76
address component in interfaces files
TCP protocol entry 57
administrator
operating system
3
Configuration Guide
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
netstat 43, 44
no -a 44
ps 44, 45
setenv 30
setperm_all 34
time 44, 45
C
C shell 29
case sensitivity
in SQL xv
changing
character sets 83, 97
languages 97
sort order 97
character devices
improving I/O performance on 38, 39
character sets 89
communications between client and Adaptive Server
49
accented letters in 13
changing 83, 84, 97
client selection of 84
code conversions and 89
configuring 99
converting between 89
databases and 90
default 83
configurations
See also syntax
in a heterogeneous environment 89
sort orders and 90
U.S. English 13
conversions, Unicode character 85
create database command, system tables created by
master interfaces files with dscp utility 58
.cshrc file 29
charsets directory 91, 94
about the 95
Chinese character sets 86
client interfaces files
difference between client and server versions 52
heterogeneous 53
homogeneous 53
5
clients
Adaptive Server communications with 49
applications and locales.dat file 96
conversion between, and server 89
default character set 84
DSQUERY and 60
file servers 61
code conversion
between character sets 89
collating sequences. See sort orders 90
comma (,)
in SQL statements xiv
commands
data translation 81
database devices
disk init 10
iostat 44
maxfiles 34
maxfiles_lim 34
master
5
preparing raw partitions for 10
sybsyntax 122
126
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
sybsystemdb
5
dsedit utility 12
sysprocsdev 5, 6
databases 90
creating master interfaces files with 58
DSLISTEN environment variable
DSQUERY environment variable
client connections and 60
described 51
3
4
dbccdb
7
devices 109
master 5, 6
model
sample 6, 7
5
naming in 61
sizes of 13
specifications 13
sybsecurity
sybsystemprocs 6, 13
tempdb
7
5
enabling asynchronous I/O 38, 39, 40
environment variables
dataserver utility 27
dbcc checkstorage, database for
dbcc error messages 45
7
DSLISTEN
LD_LIBRARY_PATH
3
dbccdb database
7
4
debug service type 56
Dec-Kanji character set 89
default
4
SYBASE
4
character set for Adaptive Server 83
character set, changing 83
character sets installed by 83
language for Adaptive Server 83
language, changing 83
sort order 83
SYBASE_ASE
SYBASE_FTS
SYBASE_OCS
4
4
4
SYBASE_SYSAM
configuring 106
error logging
configuring 106
4
delay_interval component in interfaces files 56
device component in interfaces files 57
devices
files 109
dictionary sort orders 91
Scandinavian 92
ESPs. See extended stored procedures (ESPs)
Spanish 92
directories xv
extended stored procedures (ESPs)
charsets 91, 95
localization 94
run control 22
directory schema, LDAP 73
disk init command 10
displaying current file descriptors 34
documentation
Adaptive Server translated 82
dscp utility 12
file descriptors
displaying current 34
file servers 61
files
.cshrc 29
creating master interfaces files with 58
dsedit
.login 29
.profile 29
common.loc 95
adding an LDAP server 76
Configuration Guide
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
device files 109
IBM RS/6000
locales.dat 95
localization 82
hardware error messages 42
iostat command 44
localized error messages (.loc) 95
runserver 19
monitoring systems 44
netstat command 44
shared memory 27
sort order definition (.srt) files 90
netstat -v command 44
network protocol 56
no -a command 44
French sample database
ps command 44
time command 44
timeout period 41
vmstat command 44
installation directory, Sybase xv
interfaces file 11
G
German sample database
7
clients, used by 49
H
hardware error messages 42
IBM RS/6000 42
UNIX 42
creating master files with dsedit 58
creating, for beginners 58
default location 50
Hebrew character sets 87
heterogeneous environments 84, 89
described 53
interfaces files and 53
homogeneous environments
described 53
interfaces files and 53
host component in interfaces files 56
host name
described 49
device component 57
ether placeholder 56
determining 56
HP-UX
homogeneous environments and 51
host component 56
netstat command 43
network protocol 56
ps command 44
location 50
sar command 43
loghost placeholder 59
master service type 56
multiple network listeners 59
multiple networks 51, 59
network component 56
port component 57
time command 44
timeout period 41
vmstat command 43
I
protocol component 56
I/O monitoring 43
128
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
query port backup configuration 62
query service type 56
retry_attempt component 56
servername component 56
service_type component 56
spaces in 55
tab characters in 55
unique elements in entries 59
used by clients 51
LD_LIBRARY_PATH environment variable
LDAP
4
access restrictions 70
adding a server 76
defined 69
directory definitions 71
directory schema 73
enabling 74
multiple directory services 77
sample entry 72
international systems
support for 81
Sybase support for 81
interpubs sample database
iostat command
specifying in libtcl.cfg 73
versus the interfaces file 70
LDAP libraries
environment variables 75
location of 75
LDAP server
7
IBM RS/6000 44
Sun Solaris 44
ldapurl
defined 74
example 74
keywords 75
J
Japanese sample database
LIBPATH environment variable
format of 74
4
jpubs sample database
location of 74
K
purpose of 73
libtcl*cfg
KEEPALIVE option, TCP/IP 41
password 78
listener service 52
locales directory 94
locales.dat file 95
L
language Modules 82
language modules 93
default 47
localization 81
localization support 47
login
installing new 93
localization files 82
memory requirements for 98
languages
root
sa
3
changing 97
3
error reporting in specific 95
selecting message 93
translation support 81
Latin character sets 86
superuser
sybase
3
3
.login file 29
Configuration Guide
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
netstat command
M
machine component in interfaces files 57
master
IBM RS/6000 44
Sun Solaris 44
interfaces file 51, 58
service type 56
master database
network protocols
5
master device 5, 9
HP-UX 56
IBM RS/6000 56
Sun Solaris 56
TCP/IP 11
maxfiles kernel parameters 34
maxfiles_lim kernel parameters 34
mbuf pools 44
messages
hardware errors 42
messages, selecting language for 93
model database
Monitor Server
UnixWare 56
5
network support
default configuration for 48
monserver command 20
starting from UNIX command line 18
starting with operating system 20
DSQUERY and 61
multiple 51
monitoring
I/O 43
network status 43, 44
operating system resources 43
virtual memory usage 43
monitoring systems
IBM RS/6000 44
NCR 44
monserver command 20
multiple directory services
LDAP 77
operating system
administrator
3
multiple installations
resources 43
starting servers with 20
affecting interfaces files 53
creating one interfaces file for 51, 58
multiple networks
interfaces files and 51
interfaces files for 59
parentheses ()
in SQL statements xiv
partition map
avoiding damage to 10
password encryption
for libtcl*.cfg 78
N
named pipes
default pipe 48
naming requirements for servers 56
NCR
pwdcrypt 78
PATH environment variable
4
monitoring systems 44
130
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
paths, error log 106
permissions 34
roman8 character set 83
run control directory 22
required in environment variables 29
restoring of 34
PID. See process identification
platforms, supported vii
platform-specific locale names 95
port component in interfaces files 57
port numbers and interfaces files 59
PPID. See parent process identification
privileges 10
sar command
HP-UX 43
procedure specifications 15
procedures, Sybase extended stored
process identification (PID) 27
.profile file 29
maintenance 45
sample maintenance 45
start-up 21, 22
protocol
security. See auditing
component in interfaces files 56
SPX 56
TCP/IP 56
ps command
naming requirements 56
service types
HP-UX 44
IBM RS/6000 44
listener 52
Sun Solaris 45
master 56
pubs2 sample database
pubs3 sample database
pwdcrypt
6
6
query 52, 56
service_type component in interfaces file 56
setenv command 30
setperm_all command 34
shared memory files 27
shells
password encryption 78
Bourne 29
C
29
Q
Shift-JIS character set 89
shutdown command 25, 26
size
query port backup configuration 62
query service type 52, 56
query specifications 14
sybsystemprocs database, minimum required for
upgrade 13
slloc utility 91
See System Management Interface Tool
R
raw block devices
changing 83
See character devices
sort order
raw partitions
default for Adaptive Server 83
Sort orders
availability of 10
minimum size for database devices 10
referential integrity constraint 15
retry_attempts component in interfaces files 56
changing 84
letter case in 91
Configuration Guide
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
sort orders 90
sybsystemprocs database
symbols
6
binary 91
changing 97
character sets and 90
databases and 90
in SQL statements xiii, xiv
syntax conventions, Transact-SQL xiii
sysprocsdev device
definition files 90
dictionary 91
minimum size for
purpose of 5, 6
9
spaces in interfaces files 55
Spanish dictionary sort orders 92
SPX network protocol 11, 56
square brackets [ ]
in SQL statements xiv
srt files 90
system audit tables 114
system databases
where stored
9
System Management Interface Tool (SMIT) 40
system procedures, storage location of
srvbuild utility 12
starting servers
from UNIX command line 18
with operating system 20
startserver utility 20
start-up script 21
table specifications 14
TCP/IP 41, 56
stty settings 33
Sun Solaris
iostat command 44
netstat command 44
network protocol 56
ps command 45
tempdb database
5
time command
time command 45
timeout period 42
vmstat command 44
sundiag system diagnostic tool 43
supported platforms vii
IBM RS/6000 44
Sun Solaris 45
TLI protocol 56
translated messages
system 82
SYBASE environment variable
4
$SYBASE environment variable as default server name
59
Sybase globalization support 81, 94, 97
Sybase installation directory xv
SYBASE_ASE environment variable
SYBASE_FTS environment variable
SYBASE_OCS environment variable
SYBASE_SYSAM environment variable
sybsecurity
database 7, 114
device 7, 9
sybsyntax database 121
sybsystemdb
4
4
4
4
UNIX
hardware error messages 42
network protocol 56
UnixWare
network protocol 56
us_english language 83
user connections 34
device for
purpose of
9
5
132
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
user-defined message 107
utilities
slloc 91
V
vmstat command
HP-UX 43
IBM RS/6000 44
W
Windows Sockets
X
XP Server
default configuration 48
XP Server, starting 17
xp_cmdshell command 17
Configuration Guide
133
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
134
Adaptive Server Enterprise
Download from Www.Somanuals.com. All Manuals Search And Download.
|