Swann Security Camera SW111 WIP User Manual
IP-3G ConnectCam 1000™  
Wireless Network Camera  
SW211-WIP  
USER MANUAL  
Version 1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
This Software User Guide provides detailed instructions on  
operating Ultra View, a customized software application with a  
user-friendly interface allowing you to access and control your  
camera(s). You can connect up to 16 cameras to monitor different  
places and record events for each camera. With Ultra View, you  
can also change some basic settings of the camera, such as  
schedule profiles and motion detecting. In addition, if your camera  
supports advanced features, such as audio or pan/tilt function,  
you can use these functions through the control panels of Ultra  
View.  
To use Ultra View, you must install it on to your computer. It is  
recommended to use a high performance computer if you want to  
connect multiple cameras simultaneously. The following provides  
suggested system requirements:  
Platform: Microsoft® Windows® 2000/XP/Vista.  
Hardware Requirement:  
1 camera connected: Intel Pentium III 800MHz; 512MB RAM  
2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB  
RAM  
5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM  
9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB  
RAM  
Resolution: 1024x768 or above  
NOTE When you use Ultra View to record video clips, store the  
recorded files to an exclusive hard disk drive in your  
computer to ensure there will be sufficient storage space.  
- 2 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
INSTALLATION  
Firstly, insert the Installation CD-ROM into your CD drive to  
initiate the Auto-Run program. The Auto-Run screen provides the  
following options:  
z Quick Guide  
z Advanced Guide  
z Software Manual  
z IP Finder  
z Install Software  
z Browse  
z Exit  
To begin installation:  
1. Click Install Software and then select Ultra View. The setup  
wizard appears to help you complete the installation step-by-  
step.  
NOTE To use Ultra View, you must have Microsoft .NET  
Framework 2.0 installed in the computer. The setup wizard  
will detect it and, if the program is not installed yet, ask you  
to install it during the process of installing Ultra View.  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2. When the welcome screen appears, click Next.  
3. Click Browse to select the destination location to install the  
software or click Next to use the default settings.  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Click Next again to confirm installation. The setup wizard  
starts to install the software and the progress bar indicates  
the installation is proceeding.  
5. When installation is complete, click Close.  
- 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING ULTRA VIEW  
To launch the program  
This section describes the user interface and operating  
instructions of Ultra View. To launch the program, click Start >  
Programs > UltraView > UltraView; the main screen will appear  
as below:  
NOTE Please set the resolution to 1024x768 or above on your  
computer while using Ultra View; otherwise, the display  
screen may be distorted.  
- 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Item features  
The following describes the function of each item on the main  
screen:  
„
CONTROLS Panel  
- SETTING: Click to enter the Setting screen of Ultra View.  
Click again to return to the main screen of Ultra View.  
- PLAY: Click to play the recorded video file using the media  
player on the computer (for example, Windows Media  
Player by default).  
- LOCK: Click to lock the camera controls. Click again to  
resume controls for the camera. If you have set ID and  
Password in SETTING > Account, you will be asked to  
enter the required information to unlock.  
- ALL RECORD: Click to start recording video clips using all  
connected cameras. Click again to stop recording and save  
the files in the computer. When you connect only one  
camera, this button’s function is the same as the RECORD  
button.  
TIP By default, the ID and Password boxes are “blank.” Click  
SETTING > Account to change the ID and password of  
lock/unlock function.  
- 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
„
VIEW SELECTION Panel  
- View mode buttons: Ultra View provides multiple view  
modes, including 1/4/9/16 windows and Full screen mode.  
- SCAN: When you connect multiple cameras, click this  
button to display the video views as the main window in  
turn.  
- PREV: When you connect multiple cameras, click this  
button to switch the video view to the previous camera.  
- NEXT: When you connect multiple cameras, click this  
button to switch the video view to the next camera.  
TIP To set the time interval of scanning, click SETTING >  
Other and then adjust the time from 1 to 10 seconds in the  
Time interval of scan option.  
- 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
„
CAMERA Panel  
- TRIGGER OUT: Click to turn on the trigger out connector  
of the camera. This button is available only when the  
connected camera supports the trigger out connector,  
which is used to control the external device connected to  
the camera, such as a light.  
- SNAPSHOT: Click to capture a still image using the  
selected camera and save the file in the computer.  
- RECORD: Click to start recording a video clip using the  
selected camera. Click again to stop recording and save  
the file in the computer.  
- TALK: Click to speak out through the camera. This button  
is available only when the connected camera supports 2-  
way audio function.  
- LISTEN: Click to receive the on-site sound and voice from  
the camera.  
- 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
„
SYSTEM Panel  
This panel displays the current date and time.  
„
PAN-TILT CONTROL Panel (optional)  
When you connect a pan/tilt camera, the system will detect  
the camera’s function automatically and the PAN-TILT  
CONTROL buttons will become functional. Otherwise, these  
buttons are displayed as grayed out buttons.  
- Direction/Home buttons: Click these buttons to adjust the  
camera’s viewing angle to Up (  
) / Down (  
) / Left-Down (  
).  
) / Left  
) /  
(
) / Right (  
) / Left-Up (  
Right-Up (  
) / Right-Down (  
Click the Home button (  
) to return the camera to the  
default position.  
- SWING: If you have saved two or more positions for the  
selected camera, click this button to control the camera  
swinging from one position to another position.  
- 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
„
Video View Window and Camera List  
Video View Window  
Camera List  
- Video View Window: This window displays the video view  
of the selected camera, which can be divided into 4/9/16  
windows according to your selection in VIEW SELECTION  
panel.  
- Camera List: This list displays the information of the  
connected camera(s).  
- 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To add a camera  
1. Click SETTING in the CONTROLS panel to display the  
Setting screen.  
2. Click Add New Camera.  
- 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3. In the pop-up Add New Camera dialog window, you can:  
z Select the Search tab if you are not sure of the camera’s  
IP address. Click Search camera to search the available  
camera within the network. Once the camera is found and  
is shown in the list, select it and click Add Camera.  
z Select the Input tab to add a camera by entering its IP  
address directly. Enter the camera’s IP address (default:  
192.168.0.30) and Port (default: 80), and then click Add  
Camera.  
- 13 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Enter the User name and Password for the camera, and then  
click OK. The connected camera will be displayed in the  
Camera List.  
5. Click SETTING to return to the Video View Window. The  
video view of the selected camera will now be displayed.  
- 14 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To remove a camera  
1. Click SETTING in the CONTROLS panel to display the  
Setting screen.  
2. Select a camera from the list and click Delete Camera.  
Select a camera  
To link to the Web page of the camera  
Click SETTING > Camera List > Camera Configuration and  
then Link web page to launch the Web browser that displays live  
view image and Web Configuration of the selected camera.  
- 15 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To record video  
Ultra View provides three methods to record video clips; one is to  
click the RECORD/ALL RECORD button to record manually; the  
second is to record by motion detection; the third is to set the  
recording schedule in Setting > Recording Configuration >  
Schedule Recording Configuration.  
z
Manual recording  
Click RECORD/ALL RECORD and it starts recording. Click  
the button again to stop.  
z
Trigger recording by motion detection  
When the motion detection function of the selected camera  
is enabled, you can configure the camera to start recording  
triggered by the motion detected. Click SETTING > Motion  
Configuration, and then select the Recording option to  
enable the selected camera to record by motion detection.  
- 16 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
z
Schedule recording  
This recording method will work after you have completed  
the required settings in Schedule Recording  
Configuration. The recording schedule can be defined by  
Dates or Days.  
- Dates: First, select the camera from the pull-down list.  
Then, click Add to set the Start/Stop date and time and  
then click OK to add the recording schedule to the list.  
Click Apply to save the settings.  
Select a camera  
- 17 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- Days: First, select the camera from the pull-down list and  
select Days tab. Then, select the weekday from the day  
buttons and then set the time period. Click Apply to save  
the settings.  
Select a camera  
To configure the recording settings  
To configure the recording settings, including the storage folder  
and storage options, click SETTING > Recording Configuration.  
z
Recording File Path: To change the destination folder to  
save the recorded video file, click Browse under the  
Recording File Path box to assign a new folder.  
z
Each Recording File Size: This option allows you to select  
from 20 to 200 MB so that the video will be recorded as  
another file automatically when the recording file reaches  
the specified size limit.  
- 18 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
z
z
Reserved HDD space for each camera: This option  
allows you to set to reserve the storage space on the hard  
disk drive for the recording of each camera. Before setting  
the reserve space on the hard disk drive, you can check the  
available storage space that is displayed in the HDD Free  
space field.  
Enable Recycle Recording: Click on the camera number  
to clear the files when the unreserved space of the hard  
disk drive is full.  
- 19 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To playback the recorded video  
The recorded video clips are saved ro your computer, and can be  
played using the media player on the computer, such as Windows  
Media Player. To start playback, simply click the PLAY button on  
the CONTROLS panel, and the following dialog screen will  
appear, allowing you to select the file to playback.  
Select the recorded video file under the [camera] path and then  
click Open to launch the media player to playback.  
NOTE If your player on the computer doesn’t have the video  
codec to playback the recorded video. You can download  
video codecs from  
http://www.xvid.org/downloads.15.0.html  
- 20 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To set up motion detection options  
When the motion detection function of the selected camera is  
enabled, you can set the Motion Options by selecting Alarm,  
Recording, Send e-Mail, and Trigger Out under SETTING >  
Motion Configuration.  
z
Alarm: Select Beep or Music to alert you for the motion  
detected. When you select Music, you can customize the  
sound by clicking Browse and then selecting your favorite  
music (*.wav or *.mp3 file) in the computer.  
z
z
Recording: Select this option to enable the camera to  
record by motion detected.  
Send e-Mail: Select this option so that the system will be  
able to send an email to the specified receiver. Once the  
option is selected, you have to complete the required  
information in SETTING > Motion Configuration > Email  
Configuration.  
- 21 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
- Mail Server: Enter the mail server address. For example,  
mymail.com.  
- Mail From: Enter an email address of the user who will  
send the email. For example, [email protected].  
- Mail To: Enter the email address of the user who will  
receive the email.  
- User Name: Enter the user name to login the mail server.  
- Password: Enter the password to login the mail server.  
- Subject: Enter a subject for the notification email.  
z
Trigger Out: If the selected camera supports Trigger Out  
connector, select this option to enable the Trigger Out  
function.  
- 22 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
Click SETTING > About to display the information of the software  
application.  
- 23 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Sennheiser Radio EK 3041 U User Manual
Sharp Projection Television XG P10XU User Manual
Sharp Stereo System CP S10H User Manual
Soleus Air Electric Heater HM4 15R 01 User Manual
Sony Home Theater System 3 283 040 111 User Manual
Sony Home Theater System DAV DZ10 User Manual
Sony MP3 Player TCS 30D User Manual
Sony Network Router 2140847 User Manual
Sony Projector VPH V20U User Manual
Southbend PDAs Smartphones SB1263 User Manual