QUICK START GUIDE
We’ve included this convenient Quick start guide to show you basic functions and techniques that will help you quickly master DVR.
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
INTRO
INTRODUCTION
REMOTE CONTROLLER
FRONT PANEL
2P
3P
4P
REAR PANEL
5~6P
OPERATION
OSD
8P
DISPLAY / SEQUENCE
PRIVACY / MUTE / AUDIO
RECORD
9P
10P
11P
SEARCH
BACKUP
12~14P
14P
PTZ
15~16P
17~18P
19~22P
RS-232 / ALARM
REMOTE VIEWER
SETUP
MENU DIAGRAM
23P
1. BASIC SETTING
RECORDING SCHEDULE
CAMERA REGISTRATION
AUDIO
25P
26P
26P
27P
27P
HDD
PRE-POST RECORDING
2. INTERNET & NETWORK
NETWORK CONNECTION
SERVICE PORT & DDNS
UPDATE SERVER
28P
28P
29P
3. DISPLAY
ADJUSTMENT
OSD
30P
30P
31P
SEQUENCE
4. SYSTEM
INFORMATION & UPDATE
DATE/TIME
31P
32P
32P
33P
SYSTEM LOG
SHUTDOWN
5. PASSWORD & PARAMETER
PASSWORD
33P
34P
PARAMETER
6. TECHNICAL SETTING
PTZ & RS-485
35P
35P
36P
36P
37P
37P
EVENT
ALARM INPUT
MOTION ALARM OUTPUT
REMOTE CONTROLLER
ETC.
APPENDIX
SPECIFICATIONS 38P
TROUBLESHOOTING 39P
1
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT INTRODUCTION
A.I. DVR is an ideal cost-effective CCTV solution for smallscale surveillance systems.
Easy to install and use, the A.I. DVR performs 5 actions simultaneously.
- Monitors 8 or 16 cameras
- Records video in MPEG-4 format with audio
- Control sensor & alarm functions
- Advanced search
- Transmits data over the network
Sophisticated search functions help the user easily find a desirable record.
A.I. DVR can control PTZ cameras through the 485 serial ports.
And A.I. DVR can control sensor & alarm functions through the 232 serial ports.
Remote monitoring and searching with Microsoft® Internet Explorer™ makes it
stand out from the multitude of other DVRs.
SENSOR & ALARM
TV MONITOR
NETWORK
PC
(REMOTEVIEWER)
REMOTE
CONTROLLER
AUDIO
(SPEAKER & MIC)
VGA
CAMERA
2
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR
User’s Manual
Battery
Remote Controller
Power Cord
NOTICE
If anything is missing from the package, please notify the shop you purchased DVR from.
DIRECTION BUTTONS
- Move cursor
BACKSPACE - Delete character
DOT - Input dot/Auto Focus
Enter the camera setup
NOTICE
Make sure that insert the batteries. (‘AAA’Type × 2ea)
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT PANEL
RECORDING - Start / Stop recording manually
DISPLAY - Change screen mode
SEQUENCE - Sequence On/Off
OSD - OSD On/Off
MUTE - Sound On/Off
EJECT - Eject a CD from CD-ROM
LED - Power/HDD/CD-RW/Network
SEARCH MODE CONTROL - Playback recorded data
LIVE/SEARCH - Change Live/Search Mode
MENU - Enter/Exit the setup menu or sub-menu
DIRECTION BUTTONS - Move cursor
ENTER - Confirm selection or Setting
REMOTE CONTROLLER SIGNAL RECEIVER
NUMBER BUTTONS - Input numbers or Channel
FUNCTION/BACKSPACE - Enter/Exit the PTZ mode or Delete character/number
CD-R/RW & DVD-R/RW
USB CONNECTOR - USB mouse & USB Storage device
NOTICE
The specification or design of product is subject to change without notice.
When USB 1.1 device (12 Mbps) is inserted to DVR, beep sounds 1 time.
When USB 2.0 device (480 Mbps) is inserted to DVR, beep sounds 2 times.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR PANEL (8 CHAN-
2
9
AUDIO/MIC
10
ALARM IN & OUT
5
RESET
RS-485
CAMERA × 8
6
RS-232
1
CAMERA CONNECTION
7
POWER CONNECTION
& POWER SWITCH
8
3
4
USB MOUSE
NETWORK
VGA MONITOR
1
2
Camera Connection
Connect the CCD cameras to VIDEO IN on the rear panel of the DVR.
Audio connection
Connect a microphone to AUDIO IN 1 & 2 and speaker to AUDIO OUT on the rear panel
of DVR. Audio input and output should be amplified, since the DVR does not have an
embedded amplifier.
3
4
VGA Monitor Connection
Connect the VGA monitor to the VGA on the rear panel of the DVR.
Network Connection
Connect the Normal LAN cable, connected to the network, to the network RJ-45
connector on the rear panel of the DVR.
5
6
RS-485 Connection
Connect the cable to RS-485 connector on the rear panel of the DVR.
RS-232 Connection
Connect the cable to RS-232 connector on the rear panel of the DVR.
7
Power Connection & Power Switch
Connect the power cord to the MAIN POWER connector on the rear panel of the DVR.
The DVR is booted up when Power Switch turns on.
8
9
USB Connection
Connect the USB mouse or USB storage to the USB port on the rear panel of the DVR.
TV Monitor Connection
If you want to use a TV monitor, connect the TV cable to VIDEO OUT on the rear panel of
the DVR. But you may not see almost OSD on TV monitor.
10
Alarm In & Alarm Out
Connect the sensor and alarm to the Alarm In & OUT on the rear panel of the DVR.
11 Reset (ID & PW reset)
RESET button is only used to restore ID & PW to factory defaults.To initialize DVR’s ID &
PW, press the RESET button with a straight clip for about 3 seconds.When it is reset
completely, the ID & PW reset message will displayed on the screen.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR PANEL (16
9
UT
10
ALARM IN & OUT
RESET
CAMERA × 16
6
5
RS-232
RS-485
1
CAMERA CONNECTION
7
POWER CONNECTION
& POWER SWITCH
8
3
4
2
USB MOUSE
NETWORK
AUDIO/MIC
VGA MONITOR
1
Camera Connection
Connect the CCD cameras to VIDEO IN on the rear panel of the DVR.
Audio connection
2
Connect a microphone to AUDIO IN 1 & 2 and speaker to AUDIO OUT on the rear panel
of DVR. Audio input and output should be amplified, since the DVR does not have an
embedded amplifier.
3
4
VGA Monitor Connection
Connect the VGA monitor to the VGA on the rear panel of the DVR.
Network Connection
Connect the Normal LAN cable, connected to the network, to the network RJ-45
connector on the rear panel of the DVR.
5
6
RS-485 Connection
Connect the cable to RS-485 connector on the rear panel of the DVR.
RS-232 Connection
Connect the cable to RS-232 connector on the rear panel of the DVR.
7
Power Connection & Power Switch
Connect the power cord to the MAIN POWER connector on the rear panel of the DVR.
The DVR is booted up when Power Switch turns on.
8
9
USB Connection
Connect the USB mouse or USB storage to USB port on the rear panel of the DVR.
TV Monitor Connection
If you want to use a TV monitor, connect the TV cable to VIDEO OUT on the rear panel of
the DVR. But you may not see almost OSD on TV monitor.
10
Alarm In & Alarm Out
Connect the sensor and alarm to the Alarm In & OUT on the rear panel of the DVR.
11 Reset (ID & PW reset)
RESET button is only used to restore ID & PW to factory defaults.To initialize DVR’s ID &
PW, press the RESET button with a straight clip for about 3 seconds.When it is reset
completely, the ID & PW reset message will displayed on screen.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Convention used in this
This manual is a setup and maintenance guide that can be used for refer-
ence when setting up the unit and for troubleshooting when a problem
occurs. Only authorized personnel should attempt to repair this unit.
This manual explains about 16 channels DVR.
It differs as several functions and screen comparing with 8 channels DVR.
For example, the number of screen, button and sequence etc.
Manufactory reserves the right to make changes to the product repre-
sented by this manual without notice.
The following text, symbol marks and special messages throughout this
guide:
WARNING
Text set off in this manner indicates that failure to follow
directions could result in bodily harm or loss of life.
CAUTION
Text set off in this manner indicates that failure to follow
directions could result in damage to equipment or loss
of information.
NOTICE
Text set off in this manner indicates topics of interests
that can help the user understand the product better.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
How to display DVR information On Screen Display(OSD)
To toggle between the all OSD display mode and all OSD hide modes, press the
OSD
button on the remote controller or the OSD
button on the front panel.
‰ Live Mode (Black)
‰ Search Mode : Normal (Green)
Sequence
Mute
Disk Space
Date/Time
Mute
Date/Time
Disk Space
: Audio Off & Recording Off
: Audio On & Recording Off
: Audio Off & Recording On
: Audio On & Recording On
Playback Control
Current Mode
Audio out
Control
‰ Backup Mode (Orange)
‰ Smart Search Mode (Magenta)
Start Date/Time
End Date/Time
Disk Space
Date/Time
Mute
Playback Control
Current Mode
Audio out
Control
Playback Control
Disk Space
Audio out
Control
Current Mode
NOTICE
Whenever press the OSD
will be changed as follow.
button or OSD double-click by a mouse, OSD position
Bottom of the screen Hidden Mid.
Middle of the screen
→
Top of the screen
→
→
→
‰ Mouse context menu
This context menu will be appeared when you press the MENU
button on
the remote controller or the MENU button
on the mouse.
on the front panel or right-click
Change screen mode
Move the Next Group at 1, 4, 9Ch
screen mode
Display the screen to regular sequence
Sound On/Off
Go to PTZ mode for control of PTZ
Go to Setup Menu
Go to Search mode
Go to the Statistics search menu
Go to the Smart search menu
Go to the Event search menu
Go to the beginning of recorded data
Go to the end of recorded data
Go to the Backup menu
Go to Live mode
<Live mode>
<Search mode>
NOTICE
All OSD may not display on TV monitor which is connected to VIDEO OUT.
TABLE 1.
MOVE
Press the direction
Press the direction
Use the mouse
SELECT
Press the enter
DEVICE
REMOTE CONTROLLER
FRONT PANEL
button
button
buttons
buttons
Press the enter
Left-click
MOUSE
8
Download from Www.Somanuals.com. All Manuals Search And Download.
How to display each channel & multichannel (DISPLAY)
It takes about 20 seconds to initialize the DVR after input power.
Once the DVR completes the initializing process, it will display the live video on
the connected VGA monitor.
Press the camera channel number
~
buttons on the remote controller
or channel number buttons on the front panel.
~
To change display mode:
REMOTE CONTROLLER
FRONT PANEL
MOUSE
Press the DISPLAY
Press the DISPLAY
Right-click and select
button
button
Change Disp. on context menu
NOTICE
Whenever you press the DISPLAY button or click the
Change disp., it will change screen
mode in a cycle. starting from the current screen mode.
NOTICE
Click the
Next Group button in 1, 4, 9 channel screen mode to change channel group within
the group.
How to rotate monitoring channels (SEQUENCE)
In the sequence mode, each channel is displayed on the screen for the preset
period of time.
To enable/disable sequence mode:
REMOTE CONTROLLER
FRONT PANEL
MOUSE
Press the SEQUENCE
button
button
Press the SEQUENCE
Right-click and select Sequence in context menu in Live mode
NOTICE
When sequence mode is ‘On’, icon
will be appeared on OSD.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
How to hide monitoring channels for privacy
<Privacy screen mode>
Go to SETUP menu(1.BASIC SETTING - CAMERA REGISTRATION) to do
setting the private protection.
Press the MENU
button and then press
+
button on the
remote controller.
Select ‘On’ in a privacy tab of the channel which you want to set up.
Monitoring channels will not be shown on the screen. But the video can
be recorded and played in the search mode.
How to turn sound On /Off (MUTE)
When you press the MUTE
button on the front panel or right-click and click
button on the remote controller or the MUTE
Mute menu on the context
menu, you can turn sound on or off via speaker.When mute mode is active,
icon will be appeared on OSD.
To turn sound on/off:
Press the MUTE
button
button
REMOTE CONTROLLER
FRONT PANEL
MOUSE
Press the MUTE
Right-click and select
Mute in context menu
How to record audio
‰ Audio Recording
If it is set to “RECORDING - On” in menu setting, SETUP menu (1.BASIC
SETTING - AUDIO) the audio can be recorded with video recording and a
red speaker
icon will be appeared on the live screen.The setting of audio
recording is only possible in the SETUP menu.
For more detail, See SETUP manual (1.BASIC SETTING - AUDIO).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
How to record monitoring channels
All channels are recorded automatically when you use DVR at first time. If you
want to change the recording schedule, you can change it in the SETUP
menu(1.BASIC SETTING - RECORDING SCHEDULE).
There are four ways for recording; Schedule recording, PANIC recording, Motion
Event recording and Alarm Input recording. (6.TECHNICAL SETTING -
ALARM INPUT)
NOTICE
This image will be displayed on video channel when DVR cannot receive
video signal.
‰
Schedule Recording
You can select that the recording channel, day, time, image quality, REC mode
and number of frame for recording. For more detail, See SETUP manual
(1.BASIC SETTING - RECORDING SCHEDULE).
‰ PANIC (EMERGENCY RECORDING)
When an emergency situation occurs, by pressing the PANIC
button on the
remote controller or REC
button on the front panel, you can record pre -
recorded image and the video on all cameras regardless of recording schedule
manually.
To start or stop panic recording manually:
Press the PANIC
button
REMOTE CONTROLLER
Press the REC
button
FRONT PANEL
NOTICE
On time laps recording mode, icon displayed on channel.
On all event(motion, alarm input) recording mode, icon displayed on channel.
On panic recording mode, icon displayed on each channel and icon is
flicker on screen. Panic recording can not be controlled with a mouse.
‰ Motion event Recording
Set recording mode to MOTION on SETUP menu (1.BASIC SETTING -
RECORDING SCHEDULE).
Select MOTION AREA on SETUP menu (1.BASIC SETTING -
CAMERA REGISTRATION).
Recording will be started when the motion occurs at set area.
For more detail, See SETUP manual (1.BASIC SETTING -
CAMERA
REGISTRATION).
WARNING
It is user’s responsibility to determine whether audio recording is legal for their site.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
How to playback recorded video (Normal Search)
In the playback mode you can playback the video at various speeds and forward
or reverse direction.
To search the archive of recorded video, press the LIVE/SEARCH
on the remote controller or the LIVE/SEARCH button on the front panel or
select Go search by a mouse on context menu.
button
‰ To toggle between monitoring mode and playback mode:
Press the LIVE/SEARCH
button
button
REMOTE CONTROLLER
FRONT PANEL
Press the LIVE/SEARCH
Right-click and select
Right-click and select
Go Search on context menu /
Go Live on context menu
MOUSE
To display in full screen mode for each screen during playback, press the
DISPLAY button or channel number buttons.
~
Whenever press the channel number or double-click a channel by a mouse,
display image will be changed is to original size and full size.
The button table related with playback operation is as follows:
FUNCTION
REMOTE CONTROLLER
USE MOUSE
FRONT PANEL
Toggle between playback
and live monitoring mode
Go Search
Go Live
Playback at normal speed
Reverse playback
Forward playback
Pause
Playback previous frame
(every 4 seconds)
Playback next frame
(every 4 seconds)
NOTICE
Whenever you press the reverse and forward button, the playback speed will be faster.(3 steps)
NOTICE
This image will be displayed on video channel when DVR does not have recorded
video data.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How to search recorded video (Advanced Search)
There are three ways in advanced search: STATISTICS SEARCH, SMART SEARCH, and EVENT
SEARCH.
‰ STATISTICS SEARCH
This STATISTICS shows the total size of recorded data by
time, week and month. Size of recorded file is proportional
with frequency of motion. Comparing with these charts, you
can search the video by date and time.
Move cursor select date and time.
The bar on the upper chart shows size of recorded
files by time.
Select a time bar you want to search.
Search time can be set by manual.
CUMULATIVE ANALYSIS shows size of total data on the HDD by period by time, week or month.
Select one category.
NOTICE
– recorded data(blue) /
–selected position(black) /
-cursor position(bright blue)
The descriptions of moving cursor or settings see the TABLE 1 (8 Page) of front page.
‰ SMART SEARCH
SMART SEARCH allows user to play fast only recorded
data of selected area where a motion was detected.
Select a date on calendar and set channel time
To set motion detection areas, drag mouse or
right-click on the scene. Or move cursor and
press ENTER
button with the remote
controller. Select OK button to apply changes.
NOTICE
SHOW MOTION DETECTION
- Areas where motion is detected are in Cyan boxes on search screen.
SHOW REGION OF INTEREST
- Areas where you set as a region of interest are in Green boxes on search screen.
The descriptions of moving cursor or settings see the TABLE 1 (8 page) of front page.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
‰ EVENT SEARCH
DVR records several events with the date and time.
All lists are displayed in the EVENT SEARCH screen.
Select a date on calendar and set channel and time.
Select a list of events.Then the recorded file with
events plays on the screen.
NOTICE
The description of moving cursor or settings see the TABLE 1 (8 page) of front page.
How to backup recorded video
Context menu will be appeared when you press MENU
button on a remote
controller or press MENU
button on a front panel or Right-click on a mouse
at Search mode selects BACKUP in context menu.
Orange OSD will be appeared on the screen.
You only need to search data that you want to backup.You can switch channel
with Direction
You can change display mode with DISPLAY
If you press the ENTER button on a remote controller or click BACKUP
buttons or Channel
~
buttons.
button.
ICON
on the right bottom of the screen, screen will be converted to
BACKUP mode.
Select
Backup
Click
When you search recorded data at upper screen, time
interval, channels and display mode will be applied to
BACKUP menu. If you want to change items (eg.Time,
Channels), you can change it on BACKUP menu.
Channels in gray color will not be backed up.You can
select channels to add or remove for backup in video
selection tab.
You can also backup audio.
(1 channel or 2 channel or 1 & 2 channels)
Choose a media type for your backup.
(USB storage device or CD)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How to connect & control PTZ
The RS-485 connector can be used to control PTZ(Pan,Tilt, Zoom) cameras. Con-
nect TRX+ / TRX- of the control system to the TRX+ / TRX- (respectively) of the
DVR.
Connect PTZ camera to RS-485 at the rear panel of DVR.
NOTICE
Due to specification of camera is various flowing manufacturer, please refer to the manual of
camera for more detailed information about connecting and setting PTZ cameras.
PTZ-CAMERA
PTZ MODE
The DVR can control multiple cameras that have Pan,Tilt and Zoom function.
There are three ways to control the PTZ mode using mouse, remote controller and
Direction
buttons on front panel of DVR.
You can only enter PTZ mode at “FULL SCREEN MODE” for one channel.
You can’t enter PTZ mode at 4/9/16CH viewer mode.
Move Presset 001
Zoom In
Focus Near
Focus Far
Camera Setup OSD
Setup
Zoom Out
Auto Focus
Camera setup
Context menu
Input Preset No.
Enter : Move Preset
‰ By mouse
Right-click the mouse at channel which you want to control PTZ camera.
Select PTZ Mode on the context menu.
Move the pointer to the end of the screen.
The triangle
icon will be appeared on screen.
Click the icon to move camera
You can control Zoom In/Out via mouse wheel.
When you click Fn on screen or press
to SET MODE.
Fn button on the remote controller, you can enter
When you want to exit PTZ mode, select
PTZ mode exit on the context menu.
‰ By Remote controller or Front panel buttons
Please change display mode to 1 channel full screen mode (want to control channel).
Press the channel number.
Press the
Fn button to enter PTZ mode.
buttons on the remote controller or on the front panel.
To control press the Direction
When you press the MENU button, context menu will be displayed.
When you press the OSD button, camera’s setting information will be displayed on screen.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MODE
During PTZ mode, you can enter the SET MODE using Fn button.You can set up PTZ cameras and Pre-set
positions at the SET MODE.
To enter SET MODE, please press Fn button on remote controller or front panel or click the Fn icon on the
screen.
NOTICE
To use MOVE PRESET and CLEAR PRESET function, you must set one pre-set position at least
at SET PRESET mode.
‰ MOVE PRESET
You can move the camera to the Pre-set position at this menu.You can choose the Pre-set number using
←,→button on the remote controller, ←,→ button on the front panel or -,+ icon on the screen.To move
the camera, please press the enter button or click MOVE PRESET icon on the screen.
‰ CLEAR PRESET
You can delete the pre-set positions at this menu.You can choose the Pre-set number using ←,→ button
on the remote controller, ←,→ button on the front panel or -,+ icon on the screen.To delete the Pre-set
position, please press the enter button or click CLEAR PRESET icon on the screen.
‰ SET PRESET
You can set the Pre-set position at this menu.You can set the number 1~255 (max 255 numbers).
You can choose the Pre-set number using ←,→ button on the remote controller, ←,→ button on the front
panel or -,+ icon on the screen.To set the Pre-set position, please press the enter button or click SET PRESET
icon on the screen.
‰ ZOOM
You can adjust the magnification at this menu.You can adjust the magnification using ←,→ button on the
remote controller, ←,→ button on the front panel or – ,+ icon on the screen. – icon corresponds to Zoom
out. + icon corresponds to Zoom in. About the available range of magnification, please refer to the manual
of the camera that you have set.
‰ FOCUS
You can adjust the Focus at this menu.You can adjust the Focus using ←,→ button on the remote control-
ler, ←,→ button on the front panel or – ,+ icon on the screen. – icon corresponds to Far. + icon corre-
sponds to Near.
‰ IRIS
You can control the IRIS of camera at this menu. Please adjust light inflow using opening IRIS or Closing IRIS.
You can adjust the IRIS by ←,→ button on the remote controller, ←,→ button on the front panel or – ,+ icon
on the screen. – icon corresponds to closing the IRIS. + icon corresponds to opening the IRIS.
‰ SPEED
You can adjust Speed of the PTZ camera at this menu.You can adjust the speed using ←,→ button on the
remote controller, ←,→ button on the front panel or – ,+ icon on the screen. – icon corresponds to speed
reduction. + icon corresponds to speed up.
NOTICE
You can enter the Camera setting mode using ←(Back space)button. About detailed information of
setting the camera, please refer to the manual of the camera. Due to the factory setting of camera is
different depending on manufacturers or products, this function might be unable to use.This malfunc-
tion is not caused by DVR.This DVR is set as Palco-D, 95 preset.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How to connect RS-232 port
Connecting to the RS-232 Port
Connect to RS-232 port with D-sub 9 pin if the external device uses RS-232 communication signal for control
or data communication. Configuring the RS-232 is same as RS-485.
For RS-232 setting, see “6.TECHNICAL SETTING –
ETC” and for more information related to RS-232
external device, refer to its manufacture’s manual.
How to use alarm input & alarm output
‰ Connecting Alarm Input & Output
SENSOR
To make connections on the alarm connector strip, press and hold the button and insert the wire in the
hole above the buttion. After releasing the button, tug gently on the wire to make certain it is connected.
To disconnect a wire, press and hold the button below the wire and pull out the wire.
When a specific alarm(sensor) signal is detected, DVR has the functions that make users to recognize the
alarm(sensor) occurrence easily: channel recording, channel or message popup, alarm output etc.
For alarm setting, see “6.TECHNICAL SETTING - ALARM INPUT”
ALARM IN 1 to 16
You can use external devices to signal the DVR to read to events.
Mechanical or electrical switches can be wired to the AI (Alarm In) and GND (Ground) connectors.
GND (Ground)
All the connectors marked GND are common.
Connect the ground side of the alarm input and/or alarm output to the GND connector.
ALARM OUT 1 to 16
The DVR can activate external devices such as buzzers or lights. Connect the device to the AO (Alarm
Out) and GND (Ground) connectors.
‰ Setting to the sensor alarm
Go to SETUP menu (6.TECHNICAL SETTING - ALARM INPUT) to do setting the alarm input.
Set RECORDING CHANNEL or IMAGE QUALITY,
MAIN CHANNEL, MESSAGE, ALARM OUTPUT,
DURATION and ACTIVE TIME to notify an alarm
(sensor) detection in this menu.
Select MESSAGE and type an alarm message using ON
SCREEN-KEYBOARD.
Select ACTIVE TIME and DURATION to set alarm
operation schedule and output time. Recording time
follows the PRE-POST EVENT RECORDING time in
BASIC SETTING menu.
At active time tab selection, active time window will be
appeared and set alarm active time in this window.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
‰ Setting to the motion alarm
Go to SETUP menu(6.TECHNICAL SETTING - MOTION ALARM OUTPUT) to do setting the motion
alarm.
When motion is detected in each camera channel during
active time, alarm output device operates for alarm
duration time.
For motion alarm output setting, see “6.TECHNICAL
SETTING - MOTION ALARM OUTPUT”
Select MOTION ALARM-ENABLE in each camera
channel to use alarm output function and set alarm output
channel, duration and active schedule.
‰ Setting to the ETC (Alarm Input method, RS-232).
Go to SETUP menu(6.TECHNICAL SETTING - ETC.) to do setting the alarm and RS-232 device.
Alarm(sensor) input method can be set either NO(NORMAL
OPEN) or NC(NORMAL CLOSE) in each channel.
NO(NORMAL OPEN) sensor method normally keeps “OFF”
state and converts to “ON” state when sensor is detected.
NC(NORMAL CLOSE) sensor method normally keeps “ON”
state and converts to “OFF” when sensor is detected.
Alarm output method can be set by High >>Low or
Low >> High in each channel.
High >> Low method converts output circuit from ON state
to OFF.
Low >> High method converts output circuit from OFF state
to ON.
For more information related to RS-232 setting, see its
manufacture’s manual.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Viewer - Overview
‰ INSTALLATION
Type the DVR’s IP address or domain name into the
address bar in Microsoft® Internet Explorer™ and press
ENTER.
When the Security warning window appears, confirm to
install the “DVR Remote Viewer”.
You should install the remote viewer component manually.
Please install DVR Remote Viewer Setup.exe.
Connect the remote viewer next time, click the shortcut
icon on desktop.
NOTICE
When WEB SERVICE PORT was set by 80 in 2. INTERNET & NETWORK - SERVICE PORT &
DDNS menus, type IP address or domain into the address bar in Microsoft® Internet Explorer™
However, when port number is not 80, you must type port number behind IP address or domain.
If your DVR is installed under firewall or internet sharing router, you should set port forwarding,
DMZ and other settings.
‰ CONNECTION
DVR IP Address or Domain
Service Port
User ID
Log In button
Password
Clic
Show DVR list
Save P/W
DVR list
Add DVR in the list
Type DVR Name
Delete DVR in the list
<Log In window>
To connect to your DVR, click the connection button. Select user ID and enter user password and port
in the login dialog box. If you want to save information of Log-In, check “save”.
If Log-in succeed, live mode window will be appeared. (Program supports 1024 × 768 resolution)
<LIVE Mode (NORMAL)>
<LIVE Mode (FULL)>
icon.
If you want to change NORMAL screen mode to FULL screen mode, click the
19
Download from Www.Somanuals.com. All Manuals Search And Download.
The button descriptions related with the remote viewer’s operation are as follows:
ON
OFF
FUNCTIONS
CONNECT / DISCONNECT
OSD
PTZ
MODE
SETUP
CAPTURE IMAGE
MIC
MUTE
AUDIO
SEQUENCE
DISPLAY MODE
NEXT GROUP
SCREEN MODE (FULL/NORMAL)
‰ SETUP
Set buffering time for stable video
When you connect the remote
viewer, you can select channel
that you want to connect.
transmission via network.
As buffering set time the video
transmission is delayed.
Set Duration time (0, 1, 2, 4, 8, 15, 30, 60 Sec).
If you check “Use the sequence mode at start up”, sequence mode will be started
when you connect to the A.I. DVR.
‰ STATUS
Date/Time
DVR Name
Transmit
frames per
second
Number of connecter
Current band-
width graph
Transmission network band width
<DVR Information Window>
‰ AUDIO SETUP
You can set audio output.
(1 channel or 2 channel or 1 & 2 channels Mix)
<MUTE>
<1CH>
<2CH>
<1&2CH>
‰ PTZ CONTROL
Please change display mode to 1 channel screen mode (want to control channel).
Click the PTZ icon and you can control Camera SPEED, FOCUS, DIRECTION, AUTO FOCUS and
ZOOM at upper window.
When you want to exit PTZ mode, click
(search mode) or
,
(live mode) button.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
‰ SEQUENCE & DISPLAY MODE
When you click a DISPLAY
button and SEQUENCE
button, screen will be changed as follows:
<Default Display Mode>
NOTICE
If you want to see large screen at some mode which marks with an asterisk , please double-
click on desired channel. Large screen and small screen will be switched.
DVR Remote Viewer (Playback & Backup)
To change PLAYBACK mode, click
GO SEARCH . To return monitoring mode, click GO LIVE.
<STATISTICS MODE>
<SMART SEARCH MODE>
<EVENT SEARCH MODE>
Search process is same as DVR. For more detail see “How to search recorded video”.
Date/Time
Current Operation Mode
Rewind 1min, 5min
Forward 1min, 5min
Rewind/Forward I frame (4 Sec)
Time bar
Pause
Play
21
Download from Www.Somanuals.com. All Manuals Search And Download.
‰ HOW TO BACKUP
Searching for backup interval
Click or
Click
button
Enter Backup setting mode
If backup window appears on the screen, you can select date and
time, channels, and folder to back up.
When you click OK button, backup files will be created on this
folder(C:\XDVR).To select other backup folder, press FIND button.
If you want to play it, please double-click on file (File name: Start
Year Month Day_Time ~ EndYear Month Day_Time). Bank player
will be appeared automatically. Play process is same as search
viewer.
<BACKUP ICON>
For more detail see “How to backup recorded video”.
This context menu will be appeared when you right-click the mouse.
<BANK PLAYER>
NOTICE
Show the current mode status.
LIVE
Live Mode -------------------------------------------
Normal Search Mode -----------------------------
Smart Search Mode -------------------------------
Backup Search Mode -----------------------------
SEARCH
SEARCH
SEARCH
PC Requirement for Remote Software(Recommended)
CPU
Pentium-4 2.0G or higher
512M or higher
MEMORY
VIDEO MEMORY
RESOLUTION
LAN
128M or higher
1024*768 or higher
100MB BASE Ethernet or higher
Microsoft® Windows™ 2000, XP, 2003
Microsoft® Internet Explorer™ 6.0 or higher
O/S
BROWSER
22
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
How to move the SETUP menus
2 Press
to select a tab, then press
to enter the sub menu.
1 Press
to display
the MAIN MENU
MAIN MENU
SUB MENU
DETAIL MENU
ANOTHER SUB MENU
ANOTHER DETAIL MENU
NOTICE
Move mouse cursor on the screen where you want to set and click to select.
MOUSE FUNCTION
Left Key :To ENTER or SELECT menu or settings increase
Wheel :To scroll up or down
Right Key :To controll when view live or search mode or settings decrease
LOG IN
Administrator is given all authorities to search the archive, backup
the video and setup. Guest1~3 are given partial authority to search
the archive, backup and network connection.
Select one of users and type the password to login.
If the Administrator’s Password is null, some any users can control
DVR without login.
NOTICE
For the security purposes, set a password on SETUP menu. (5.PASSWORD & PARAMETER -
PASSWORD)
ON-SCREEN KEYBOARD
When the ON-SCREEN KEYBOARD appears, input characters
and numbers by selecting them with the ARROW buttons and
press ENTER to input it.
Change Capital/Small letter
Space
Delete all character or number
Delete character or number
Apply changes and close the ON-SCREEN KEYBOARD
.
Cancel changes and close the ON-SCREEN KEYBOARD
.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Press MENU to enter the SETUP menu. Press one more time to exit.
Recording schedule, Camera registration,
Audio, HDD, Pre-post recording.
z BASIC SETTING
Network connection, Service port & DDNS,
Update server.
z INTERNET &
NETWORK
Adjustment, OSD, Sequence.
z DISPLAY
Information & Update, Date/Time,
System LOG, Shutdown.
z SYSTEM
Password, Parameter.
z PASSWORD &
PARAMETER
PTZ & RS-485, Event, Alarm input, Motion
alarm output, Remote controller, Etc.
z TECHNICAL
SETTING
1. BASIC SETTING
RECORDING SCHEDULE
Press
buttons on remote controller to select RECORDING SCHEDULE in SETUP menu.
+
Applies same recording settings to all
cameras simultaneously.
z GLOBAL
Add
Max 16 schedules, to set recording
z EACH
settings of each camera separately.
Higher schedule number(No.) is applied
above all.
The factory default setting are 8 and 7
(NTSC), which means DVR records at the
speed of 7~8 frames per second.The
higher recording frame is set the more
natural video will be displayed on the
screen when you playback.
z FRAME SETTING
The lower recording frame is set the more
space you will save on the hard disk drive.
There are different record frame rate
settings to choose 0, 1, 2, 3, 5, 7, 8, 10, 15, 30
frame per second (NTSC).
CAUTION
If you set to ‘0’ frame, recording will be disabled even though PANIC.
So recommend setting over 1 frame.
Enabled/Disabled recording schedule.
Schedule number.
USE
No.
Select camera No. : All or 1 ~16 camera.
Select day : Every → Each Day → Mon~Fri → Mon~Sat → Sat~Sun
Select recording time : 00:00 ~ 24:00
DAY
TIME
IMAGE QUALITY
REC MODE
RES.
Select recording image quality : Normal → Good → Better(default) → Best
Select recording mode :Time Lapse(default) → Motion
Select resolution : CIF (352 × 240) → D1(720 × 480)
Add schedule of EACH camera setting.
Delete schedule of EACH camera setting.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA REGISTRATION
Press
+
buttons on remote controller to select CAMERA REGISTRATION in SETUP menu.
Edit NAME (Max 15 characters). Use the
ON-SCREEN KEYBOARD to enter a
specific camera’s name.
z
z
NAME
Select Beep On or Beep Off.
VIDEO LOSS
Beep On mode will sound a beep from an
internal buzzer if the camera signal is
removed or the camera power is off.
Select whether to display images on the
monitoring screen for privacy. (On/Off)
PRIVACY mode doesn’t show the
monitoring video but the video can be
recorded and played in the search
mode.
You can set the motion detection area for
motion recording mode in this menu.
If you select the motion area, it converts
into the left screen.
z
z
PRIVACY
MOTION AREA
Click or drag the area you want to detect
or press enter on the remote controller.You
can SELECT/CLEAR ALL in context
menu.
And the area chosen will mark with blue
color. It records when the motion happen
in set area with recording mode. Areas that
happen to motion are cyan block.
Motion sensitivity is marked by Most →
z SENSITIVITY
Sensitive → Normal → Insensitive
NOTICE
If you set to ‘0’ frame, you can not set MOTION AREA and SENSITIVITY.
AUDIO
Press
+
buttons on remote controller to select AUDIO in SETUP menu.
If the speaker is installed, you can
z LIVE(SPEAKER)
select whether to turn sound On/Off
via speaker on live mode.
If the RECORDING is On, the audio will
be recorded with the video together.
z RECORDING
NOTICE
Audio is supported only 2 channels.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
HDD (Hard Disk Drive)
Press
+
buttons on remote controller to select HDD in SETUP menu.
Shows the used disk space on the HDD.
z DISK SPACE
If you choose Yes, DVR overwrites
previous recording when HDD is full. If
you choose No, the recording is stopped
when the HDD is full for recording.
If free space remains less than 2 Giga
byte, the disk space bar on OSD will be
changed green to red color.
z OVERWRITING
If “On” is set, it will beep when the HDD
becomes full.
z BEEP
Displays a warning message when the
DVR runs out of free space on the HDD
for recording.
z HDD WARNING
OSD
Message will be flickered on the live
screen when low disk space (less than
1.5G, about 2 second).
Recording stop message will be
flickered on the live screen when HDD
remains less under 1G.
Shows the HDD’s model name and used &
total disk space.
z
HDD INFORMATION
If you format the hard drive, it will erase all
the recorded data and log on the HDD.
z FORMAT
CAUTION
If you click FORMAT, warning window will be displayed. Once the HDD is formatted, all recorded
data, system logs and event logs will be lost.
PRE-POST RECORDING
Press
+
buttons on remote controller to select PRE-POST RECORDING in SETUP menu.
Pre recording time means the amount of
time recorded and saved before panic,
alarm and motion events occurred.Video
will be recorded from the buffer for the
set period of fixed time (4~8 Sec).
z PRE RECORDING
Post recording time is the amount of time
recorded after motion and alarm events
are finished.Video will be continuously
recorded for the set period of time after
event is finished.
z
POST RECORDING
Post recording time are 5, 10, 30 Sec, 1, 5,
10 Min.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INTERNET & NETWORK
‰ Set Network Connection and DDNS in INTERNET & NETWORK.
NETWORK CONNECTION
Press
+
buttons on remote controller to select NETWORK CONNECTION in SETUP menu.
Select either STATIC IP or DHCP.
z NETWORK TYPE
A STATIC IP address is a number (in the
form of a dotted quad) that is assigned to
a computer by an Internet service
provider (ISP) to be its permanent
address on the Internet.
Short for Dynamic Host Configuration
Protocol(DHCP), a protocol for assigning
dynamic IP addresses to devices on a
network.With dynamic addressing, a
device may have a different IP address
every time it connects to the network.
Type the IP Address when you select
STATIC IP.
z IP ADDRESS
Type the Subnet Mask when you select
STATIC IP.
z SUBNET MASK
z GATEWAY
Type the Gateway when you select
STATIC IP.
Primary DNS is used to refer the DVR’s
IP address to a preferred domain name.
z PRIMARY DNS
z SECONDARY DNS
Secondary DNS is used to refer the
DVR’s IP address for backup domain
name.
NOTICE
When you select DHCP and press APPLY button
, allocated IP information will be displayed.
SERVICE PORT & DDNS
Press
+
buttons on remote controller to select SERVICE PORT & DDNS in SETUP menu.
Type the web service port number.
(Port No: 1 ~ 65534)
z WEB SERVICE PORT
If you want to use DDNS, please select
here.
z USE DDNS
Type the DDNS Name.
z DDNS ID
Please click the CHECK ID button for
z CHECK ID
register and change settings.
NOTICE
When WEB SERVICE PORT was set by 80 in 2. INTERNET & NETWORK - SERVICE PORT &
DDNS menus, type ip address or domain into the address bar in Microsoft® Internet Explorer™
However, when port number is not 80, you must type port number behind IP address or domain.
If the registered DDNS ID is “dvr” and DDNS SERVER is “webdvr.net”, you can connect to the DVR
by entering the full domain name,“dvr.webdvr.net”, through the Microsoft® Internet Explorer™
If your DVR is installed under a firewall or internet sharing router, you should set port forwarding,
DMZ and other settings.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
UPDATE SERVER
Press
+
buttons on remote controller to select UPDATE SERVER in SETUP menu.
Type the Update server address.
z UPDATE SERVER
Recover all the settings to the original
settings by a manufacturer.
z DEFAULT
29
Download from Www.Somanuals.com. All Manuals Search And Download.
3. DISPLAY
‰ Set ADJUSTMENT, OSD and SEQUENCE in DISPLAY.
ADJUSTMENT
Press
+
buttons on remote controller to select ADJUSTMENT in SETUP menu.
Adjust BRIGHTNESS, COLOR and CONTRAST of each channel.
If you select one camera channel, it converts into this screen.
You can see and change the BRIGHTNESS, COLOR and
CONTRAST on the adjustment bar.
NOTICE
If you set ‘0’ frame at SETUP menu (1.BASIC SETTING - RECORDING SCHEDULE - FRAME
SETTING), you can not adjust this channel.
OSD
Press
+
buttons on remote controller to select OSD in SETUP menu.
Show or hide the camera name on the
z CH INFO
display monitor.
Show or hide the current date / time on
the display monitor.
z DATE/TIME
z DISK SPACE
Show or hide the disk space bar.
Show or hide the recording mode icon
on the display monitor.
z
RECORDING MODE
NOTICE
If DATE/TIME OSD is set to Off mode, audio recording and sequence icon will be hidden
together.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SEQUENCE
Press
+
buttons on remote controller to select SEQUENCE in SETUP menu.
On SEQUENCE mode, each channel is
displayed on the screen for the preset
duration. (Max. 60 Sec) And if you set to ‘0’
second, screen mode will be skipped over.
z DURATION
On SEQUENCE mode, a SEQUENCE
icon
is displayed on live screen.
Select whether to use the SEQUENCE
mode automatically when DVR starts up.
z
USE THE
SEQUENCE
MODE AT
STARTUP
NOTICE
You can not set ‘0 Sec’ all of DURATION.
You can not also set DURATION only 16 Channel mode.
4. SYSTEM
‰ Set INFORMATION & UPDATE, DATE/TIME, SYSTEM LOG and SHUT-
DOWN in SYSTEM menu.
INFORMATION & UPDATE
Press
+
buttons on remote controller to select INFORMATION & UPDATE in SETUP menu.
Type the DVR Name. (Max 15 characters)
Show the used Disk Space for recording.
Show the MAC Address.
z DVR NAME
z DISK SPACE
z MAC ADDRESS
z NETWORK
If you click the UPDATE button, the
firmware will be updated via network.
Update from a USB storage device.
Connect a USB storage device with
new firmware.
z USB
And press or click the UPDATE
button.
Show the Firmware Version.
z FIRMWARE
‰ How to update via network
If your DVR connect with internet, DVR will check the new firmware automatically
by periods. Updates direction message blinks on the OSD if there is firmware
to update and shortcut icon is displayed on the right bottom of the screen.
Click the icon or go to SETUP menu (4.SYSTEM - INFORMATION & UPDATE).
Then click the NETWORK UPDATE button. UPDATE will be progressed.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
‰ How to update via USB storage
Select the firmware file from the list and press or click OK button.
Once the firmware has been successfully updated, the DVR will be
rebooted to apply changes. USB storage device’s file system should
be FAT32.
Before updating, firmware files (cod-file) should be copied into a
“Firmware” folder on the USB storage device. If you connect several
USB storage devices with firmware, the DVR will only recognize of a
first connecting USB storage device.
WARNING
Please note that because updating firmware has potential risk, please do it with caution!
Do not turn off power or reset your system at this stage!
DATE/TIME
Press
+
buttons on remote controller to select DATE/TIME in SETUP menu.
Select the DATE.
z DATE
Select the DATE FORMAT.
Year/Month/Day → Day/Month/Year →
Month/Day/Year
z DATE FORMAT
Select the TIME.
z TIME
Select the TIMESERVER.
time.windows.com → time.nist.gov
z NTP TIME
SERVER
You can select TIME ZONE from a down list
menu.
z TIME ZONE
If you click UPDATE button, time will be
renewed automatically by timeserver
and GMT via internet.
z UPDATE
WARNING
If you set a date and time that is older than some of records, all data dated later than the new
date and time will be deleted.
SYSTEM LOG
Press
+
buttons on remote controller to select SYSTEM LOG in SETUP menu.
The system log records all DVR events with the date and time it
occurred:
system start and shutdown, system reboot, recording start and
end, setup changes, etc.
The events are listed from the oldest to the most recent.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
SHUTDOWN
Press
+
buttons on remote controller to select SHUTDOWN in SETUP menu.
CAUTION
If you turn the power off without shutting down the system, it can lead to data lost or cause physi-
cal damage of the HDD.
DVR will verify abnormality of HDD at next start up. So, it may take booting time longer.
5. PASSWORD & PARAMETER
‰ Set PASSWORD and PARAMETER in PASSWORD & PARAMETER menu.
PASSWORD
Press
+
buttons on remote controller to select PASSWORD in SETUP menu.
Type the current password.(Max 7 characters)
The factory default password is null.
z CURRENT
PASSWORD
Type the new password.
z NEW
PASSWORD
Type the new password once again to
confirm.
z CONFIRM
PASSWORD
Type the guest password.(Max 7 characters)
The factory default password is each guest1,
guest2 and guest3.
z GUEST
PASSWORD
Guest 1 can search, backup and connect via
network.
Guest 2 can search and connect via network.
Guest 3 can only connect via network.
NOTICE
If you forget your password, please press RESET button on the rear panel with a straight clip for
about 3 seconds.
You can not change guest authorities.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
PARAMETER
Press
+
buttons on remote controller to select PARAMETER in SETUP menu.
Load parameter saved on the USB storage.
z LOAD
PARAMETER
Save the current parameter on the USB
storage.
Configuration file “DVRParm.dat” will be
saved in the “Parm” folder on the USB
storage.
z SAVE
PARAMETER
Recover all the settings to the original
settings by a manufacturer.
z SET FACTORY
DEFAULT
NOTICE
The configuration file “DVRParm.dat” should be saved into a “Parm” folder on the USB storage to
load parameter.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
6.TECHNICAL SETTING
‰ Set PTZ & RS-485, EVENT, ALARM INPUT, MOTION ALARM OUTPUT and
REMOTE CONTROL in TECHNICAL SETTING menu.
PTZ & RS-485
Press
+
buttons on remote controller to select PTZ in SETUP menu.
Select the PTZ ID. (0 ~ 99)
z PTZ ID
Select the PROTOCOL. (Default is Pelco-D.)
z PROTOCOL
z BAUD RATE
Select the BAUD RATE. (Default is 9600.)
1200 → 2400 → 4800 → 9600 → 19200 →
38400 → 57600 → 115200
Baud rate means the speed of between the
devices.
Select 5~8 the DATA BIT. (Default is 8.)
Data bit means the number of data bit.
z DATA BIT
Select 1 or 2 the STOP BIT. (Default is 1.)
Stop bit means the number of stop bit
between data transfer.
z STOP BIT
Select the PARITY. (Default is No Parity.)
No Parity → Odd Parity → Even Parity.
Parity means the error check bit while the
data is transferring.
z PARITY
NOTICE
All of settings must be the same as the PTZ camera’s settings.
The settings is different from the camera’s models. See the PTZ camera’s manual for setting of
RS-485.
EVENT
Press
+
buttons on remote controller to select EVENT in SETUP menu.
Type the EVENT SERVER domain or IP address.
Type the domain or IP address of the computer
which used for operating CMS(Central Monitoring
System) software.
If you want to receive event message on CMS
software, you must set the same port as CMS port.
z
EVENT SERVER
2510
2510
Select the EVENT TYPE.
z EVENT TYPE
The event occurrence at the time of which it selects
to inform as the event server which it sets.
It will be available to set the time when it will
receive the event message in event type by.
Check if you want to receive event message
by E-MAIL.
Must do SETUP after check.
z EVENT
NOTIFICATION
TO E-MAIL
Type sender MAIL SERVER address.
z MAIL SERVER
If you do not type mail server address,
event message mail will be classified by spam.
z
z
USER ID & P/W Type mail account USER ID and PASSWORD.
MAIL ADDRESS Type the E-mail address to receive event message
mail.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
ALARM INPUT
Press
+
buttons on remote controller to select ALARM INPUT in SETUP menu.
Select recording Channel (1~16 Ch) and record-
ing image QUALITY.
z RECORDING
CH / QUALITY
(Normal → Good → Better → Best → No Rec).
Select Channel to display by full screen at alarm
action (1~16 Ch).
z MAIN CH
Type TEXT to show on screen at alarm action
z MESSAGE
using screen keyboard (Max 15 characters).
Select alarm OUT channel (Alarm out 1~16).
z OUT
Select alarm DURATION time (5 → 10 sec).
z DURATION
z ACTIVE TIME
Set alarm operating time.(Active time
window will be appeared.)
MOTION ALARM OUTPUT
Press
+
buttons on remote controller to select MOTION ALARM OUTPUT in SETUP menu.
Select using MOTION detect function or not.
Select alarm OUT channel (Alarm out 1~16).
Select alarm DURATION time (5 → 10 sec).
z
MOTION ALARM
z OUT
z DURATION
z ACTIVE TIME
Set alarm operating time.(Active time
window will be appeared.)
REMOTE CONTROLLER
Press
+
buttons on remote controller to select REMOTE CONTROLLER in SETUP menu.
Select whether to make a beep when
you press the button on the remote
controller.
z BUTTON BEEP
Enable “ID CONTROL” function to
control the selected one by using DVR
ID when several DVRs are installed in
the same place.
z ID CONTROL
Select a number of DVR ID.
z
DVR ID
If several DVRs are installed, you can control DVRs totally or selectively using one
remote controller. If the DVR has the same DVR ID, it will be controlled simultane-
ously. If you want to control a specific DVR, check the ID CONTROL and select
one DVR ID on DVR ID tab.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
‰ How to use DVR ID
Press ID
and current DVR ID number and then ENTER
button on the
remote controller.
DVR ID (1)
1
Press the number
Current DVR ID
~
button same as current DVR ID
ETC.
Press
+
buttons on remote controller to select ETC. in SETUP menu.
Select sensor action way between
NC(NORMAL CLOSE) or NO(NORMAL OPEN).
z SENSOR INPUT
z ALARM
Select alarm action way between High >> Low
or Low >> High.
Select the BAUD RATE. (Default is 9600.)
1200 → 2400 → 4800 → 9600 → 19200 →
38400 → 57600 → 115200
z BAUD RATE
Baud rate means the speed of between the
devices.
Select 5~8 the DATA BIT. (Default is 8.)
Data bit means the number of data bit.
z DATA BIT
Select 1 or 2 the STOP BIT. (Default is 1.)
Stop bit means the number of stop bit
between data transfer.
z STOP BIT
Select the PARITY. (Default is No Parity.)
No Parity → Odd Parity → Even Parity.
Parity means the error check bit while the
data is transferring.
z PARITY
37
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Compression
Data Size
H.264 Level (Professional MPEG-4 DMX-V3)
0.2KB/frame
Image Size
D1 Level (704 x 480), CIF Level (352 x 240)
8CH DVR: 8/8ch, 16 CH DVR: 16/16ch
2 CH (1.0Vpp, 75Ω, BNC)
Video Input/Output
TV Output
VGA Output
1 CH (1024 x 768)
*Can be used TV out simultaneously
Screen Split Control
Recording Frame
1,4,9,16 & Auto sequence
NTSC 120FPS / PAL 100FPS
Compression
Input/Output
G.726 (ADPCM 8KHz sampling), 32 Kbps
2CH Line In / 1CH Line Out
Sensor Input
Alarm Output
8CH DVR: 8 Programmable, 16CH DVR: 16 Programmable
8CH DVR: 8 TTL, 16CH DVR: 16 TTL
Operating System
Embedded DMX- V3 Engine Booting Time within 20 Sec
Hacking and Virus Free
HDD Storage
Backup Storage
External Control
H/W Watchdog
Network
1 Internal 3.5" EIDE HDD( Max 3 )
CD-RW/DVD-RW/USB 2.0
USB Mouse, IR Remote Controller
Auto Recovery System By Watchdog Time
LAN 10/100 Base Ethernet(RJ-45)
Serial
RS-485 (Half Duplex,Terminal Block), RS-232 (D-Sub 9)
Recording Mode
Search method
Motion Detection
Software
Continuous, Scheduled, Motion Detection, Sensor Event, Manual
Statistics, Calendar, Event Search, Smart Search,
22 x 15 Motion area block ,4 Steps sensitivity
Built-in Remote Management (Monitor, Search, Backup) Program
Dimensions (W x H x D)
Weight
430mm x 90mm x 415mm
Approx. 7.3 Kg (included with HDD)
5˚C ~ 50˚C
Operating Temperature
Operating Humidity
Power Source
20 ~ 80% RH
AC 110/220V
For the safety of users and stable operation, you should use the rated power adapter
that is provided with the package.
For clearer video, it is strongly recommended to use the shield cable under noisy
circumstances.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING(FAQ)
QUESTION
ANSWER
Check power cord connection.
Check the power source of outlet.
I can’t turn on DVR.
What is the correct jumper setting Single master without slave. Most of HDD drives
come with the jumper setting as a master without
slave so you may not need to change the jumper
setting after you purchase HDD and install it into
DVR. Check the documentation that came with your
hard drive.
for using a single hard disk drive?
DEVICE
Can I install two hard drives in DVR? Yes. DVR supports Max. 3 hard disk drives.
How can I reset DVR to the factory Select the ‘set factory default’ from “PASSWORD &
default setting?
PARAMETER/PARAMETER” in SETUP menu.
I forgot my password.What should If you forget your password, press the factory RESET
I do?
button on the rear panel with a straight clip for about
3 seconds.The default password see “PASSWORD &
PARAMETER/PASSWORD” in SETUP manual.
Can USB memory stick be used?
I see nothing after I turn on DVR.
Yes.
Check the camera input and video output connection
on DVR rear panel. If you can’t find any problem with
these connections, check whether the camera power
cable is firmly connected.
Check “PRIVACY - On” in BASIC SETTING/CAMERA
REGISTRATION menu.
VIDEO
&
AUDIO
Press OSD button with the remote controller.
Check OSD setting in “DISPLAY/OSD” SETUP menu.
I can not see OSD.
Press Mute button with the remote controller.
Check connection with audio cable.
Check the power connection of output device.
I can not hear AUDIO.
Using the Time Record and Motion Record from
“BASIC SETTING/RECORDING SCHEDULE/
RECORDING MODE” SETUP menu.
Press the PANIC button on the remote controller or
REC button on the front panel.
How do I record?
Check “BASIC SETTING/HDD/OVERWRITING-Yes”
and check “BASIC SETTING/RECORDING
SCHEDULE” in SETUP menu.
DVR is not record.
RECORDING
&
PLAYBACK
Is it possible to backup the wanted
Yes, select starting and ending time, then use the
section of video during the playback? Backup to save.
Can I record everything 24hours
7days a week without stopping?
Yes. On ‘Recording Schedule’ on the SETUP menu,
select “Time Lapse” and “Every”.
Check HDD space.
DVR stopped for recording.
Set ‘OVERWRITING-On’ in “BASIC SETTING/HDD”
SETUP menu.
How can I erase all data on the hard Select ‘FORMAT’ option on the “BASIC SETTING
disk drive?
/HDD” in SETUP menu.
Check connection between camera and DVR.
Check the power connection of camera.
Check if HDD gets full.
I hear beeping continuously at DVR.
ETC.
Confirm and change whether battery of remote
controller was consumed.
Remote controller is not work.
What does that Event mean?
Set by equal ID in case DVR and remote controller
ID do not fit each other.
For more detail. See “TECHNICAL SETTING
/REMOTE CONTROLLER” in SETUP manual.
That means Motion, Log-in,Video-loss event activity.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
NETWORK DVR
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|