DVR4-Alert™ Plus
4CH Digital Video Recorder
SW242-DAL / SW244-DAO
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Recording
6.1
6.2
6.3
Start Recording.................................................................................. 12
Stop Recording.................................................................................. 13
Recording Time on Hard Drive ......................................................... 13
7. Playback................................................................................................. 14
8. USB Programming................................................................................ 15
8.1 PC Viewer Program............................................................................ 15
8.2
8.3
Program Buttons................................................................................. 15
PC Backup.......................................................................................... 16
9. Specifications......................................................................................... 17
10. Appendix
10.1 System Connection Diagram............................................................. 18
10.2 DVR Accessories (included) ............................................................. 18
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
Chapter 1: DVR Features
z 4 Channel BNC Camera Inputs
z 1 Channel BNC Video Output
z Video Format: NTSC / PAL
z Motion Detection with Sensitivity and Area Settings
z Time Schedule Recording / Motion Triggered Recording
z One ATA-100 (IDE) Hard Disk Interface
z USB 2.0 Back up to computer
z Remote Control & Removable Hard Drive Tray
Chapter 2: Overview
IR Receiver
2.1 Front Panel
Finger Hole
Removable HDD Tray
HDD Lock
Stop
REC
CH1
CH2
CH3
CH4
Quad
Channel 1
Channel 2
Channel 3
Channel 4
Quad View
Rewind
Stop Playing/Recording
Record
Menu/Esc
SEL/Edit
Up
Enter / exit setup menu
Confirm Selection / Edit
Move up / left cursor
Move down / right cursor
Power indicator
REW
Down
Pause
Play
PWR
HDD
Pause
Playback Video
Fast Forward
Hard disk drive indicator
FWD
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
2.2 Rear Panel
1 BNC video output
4 BNC Video Inputs
Power Supply Input
USB
Fan
Grounding Terminal
2.3 Remote Control
CH1
CH2
CH3
CH4
Quad
Select or enlarge Channel #1
Select or enlarge Channel #2
Select or enlarge Channel #3
Select or enlarge Channel #4
Quad View (4 Camera View)
Rewind
Playback Recording
Forward
Record
Pause
Stop recording / playback
Enter or exit setup menu
Move up / left cursor
Select / modify item
Move down / right cursor
Not Used
Menu
SEL
PTZ
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
3.1 Installing Hard Drive
1. Unplug the power supply. Never install or uninstall HDD when DVR is on.
2. Pull the HDD tray from the unit using the finger hole.
3. Connect the power cord and data cable to hard disk drive.
Make sure the HDD is set to be MASTER according to the hard drive manual.
The 4 pin connection is the DC power cable for HDD, and the wider cable is the standard
hard drive IDE type connection.
4. Firmly insert the HDD tray into DVR body.
5. Lock the HDD tray.
Lock the caddy by turning the key clockwise.
If you need to unlock the tray, turn the key counter-clockwise.
CAUTION:
1. If HDD tray is not locked, the DVR system may not function properly.
2. Do not remove the HDD tray while the DVR is on.
3.2 Connecting Camera and Monitor
There are 4 camera inputs and 1 video output with BNC connectors (Refer to
2.2 Rear Panel).
3.3 Connecting the Power Supply
Please only use the power adapter supplied with the DVR. The standard power
supplied to the DVR is DC 12 Volt, 3.0 Amp.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
Chapter 4: Starting the DVR
4.1 Detecting Installed Hard Drive
After connecting the power, the system
will boot-up and detect the installed hard
drive.
Checking HDD ……
MASTER…
On the screen it will show the hard drive
information. If no hard drive is detected,
check that the HDD is set to master and the
tray is locked.
4.2 Recovering Lost Data
RECOVER HDD?
A power failure can cause data to be lost,
however the DVR system will automatically
recover lost data after power is reconnected.
04811-101735
(SELECT)YES/(MENU)NO
4.3 Restore Recording Feature
If a power error occurs during
recording process, the system will
automatically resume recording after
power is reconnected.
Power Error Detected
Restore Hard Disk (Master) OK
Restore REC Mode…………OK
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
4.4 Main Screen
When the DVR is turned on the
following display will appear with your
connected cameras:
Upper left: Percentage of hard drive
space used
Middle: Channel number (CH1 through
CH4)
Bottom right: Date and Time
Bottom left: System/recording status.
(Refer to 6.1 Start Recording)
Chapter 5: DVR Setup
＞
5.1 Setup Menu
MenuDirectory
CAMERA SELECT
RECORD SELECT
RESOLUTION
RECORD FRAME
VIDEO QUALITY
SCHEDULE SET
MISCELLANEOUS MENU
HARD DISK SET
VIDEO MODE
MAIN
MENU
AUTO RECORD
PASSWORD ENABLE
PASSWORD CHANGE
COLOR SET
TIME SET
MOTION SET
FACTORY RESET
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
MAIN MENU
CAMERA SELECT
1 2 3 4
1 2 3 4
EACH
25
[
Menu]: Push to enter system menu
RECORD SELECT
RESOLUTION
RECORD FRAME
RECORD QUALITY
SCHEDULE SET
MISCELLANEOUS MENU
HARD DISK SET
VIDEO MODE
HIGH
[ Up] and [ Down]: Move the cursor
[ SEL]: Select/modify settings
PAL
MOTION SET
FACTORY RESET
[
Menu]: Press exit/previous menu
PRESS (UP，DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
5.2 Camera Select
The DVR system can display 4
cameras at once or you can limit the
number of cameras displayed to save
HDD space.
Press [ SEL] to modify setting, or
press [CH1], [CH2], [CH3] and [CH4] to
set each channel separately.
If a channel is disabled, the system will display “OFF” on the monitor; this
channel will not be recorded. (Refer to 5.3 Record Select)
5.3 Record Select
Manually set which channels are allowed to record.
Note: If no channels are selected, an error message will appear briefly on the
screen when record is selected. “1234” indicates all cameras are set to record.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
5.4 Resolution
There are two modes of resolution for video recording:
EACH Mode:
The DVR compresses and records each video channel separately so you can
enlarge a single channel to full screen display and still be recording on all channels.
You can also record on specific channels, for example, you can turn off the record
function of CH1 and CH2 and then the system will only record video on CH3 and
CH4.
Press [CH1], [CH2], [CH3], and [CH4] enlarge relative channel to full screen
display.
In EACH Mode you can use the Auto Switch Function.
Auto Switch Function:
When the system is in live mode or recording mode, press and hold the
[QUAD] button for three (3) seconds to make each video channel enlarge to full
screen. Each camera will appear in full screen for three (3) seconds, including Quad
view. The switch will lasts until any button is pushed.
NOTE: Pushing the [ Stop] button will stop the switch feature but also may
stop the recording depending on Record Schedule Settings (5.7 Schedule Set).
QUAD Mode:
The DVR will compress and record all 4 video channels into one file however
recordings will be limited to quad view and you will be unable to view full screen
images in playback mode.
Auto Switch Function is not available in QUAD Mode.
5.5 Record Frame
Record frame indicates the frames or images recorded per second. More
frames per second gives smoother movement but uses more hard disk space.
The system default is 30fps (frames per second) for NTSC (PAL is 25fps).
This means the system will record 30 frames per second shared by the active
cameras. You can set frame rate for NTSC to 30,15,10,7,5,4,3,2,1 frames per second
(PAL is 25,12,8,6,4,3,2,1)
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
5.6 Record Quality
There are three levels of recording quality: High, Normal, and Low.
Higher quality records the best images but uses more hard drive space.
Record frame rate, record quality and available hard drive space will affect the
total recording time of the DVR system.
5.7 Schedule Set
You can preset video recording modes by Time and Motion Detection
Recording.
“-” No Recording
SCHEDULE SET
“T” Time (or manual recording: Default)
TTTMMMTTTTTTMMTTTTT--MMT
│
│
│
│
│
│
│
│
│
0
3
6
9
12 15 18 21 24
“M” Motion Detection Record
[ Up] and [ Down]: To move the cursor
[ SEL]: To modify record method
Numbers along bottom indicate the 24
hours of a day
PRESS (UP，DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
For example:
If you want to record by motion detecton during 3 to 6 o’clock, set the time
points (3, 4, 5) to “M”; if you want to continuous record from 7 to 12 o’clock, set
the time points (7, 8, 9, 10, 11) to “T”.
Both of the recording methods need to be triggered by pressing the [ REC]
button. After pressing [ REC] button, if the schedule is set to “T” at that time, the
DVR will start to record immediately; if the schedule is set to be “M”, the DVR will
not record until motion (movement) is detected by system.
Force Record：
When the DVR is set to record by motion detection, the DVR will not record if
there is no motion. If you want to record immediately, please press and hold [ REC]
button for 3 to 5 seconds to begin manual recording.
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
5.8 Miscellaneous Menu-Auto Record
When this option is set to “ON”, the DVR will automatically continue with the
current Record Schedule if no actions occur for 5 minutes. If you choose “OFF”,
the DVR will not record until you press the [ REC] button.
5.9 Miscellaneous Menu-Password Enable
This DVR is equipped with password protection features. Set this feature to
“ON” to enable password protection. When this option is set to “ON”, you will be
required to enter a password if you want to stop recording or enter the menu.
System default password: Press [CH1] button six (6) times.
5.10 Miscellaneous Menu-Password Change
All keys can be used as password
PASSWORD : - - - - - -
PASSWORD : - - - - - -
PASSWORD : - - - - - -
CURRENT
NEW
key except the [ Menu] key,
which is used to exit.
CONFIRM
If you forget your password,
please refer to 5.16 Factory Reset.
5.11 Miscellaneous Menu-Color Set
HUE: 0-99
SATURATION: 0-99
CONTRAST: 0-99
BRIGHTNESS: 0-99
[ Up] and [ Down]: move the cursor
[REW]: Increase value
[FWD]: Reduce value
[CH1-CH4, QUAD]: Select channel
[
Menu]: Exit
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
5.12 Miscellaneous Menu-Time Set
TIME SET
Configure system date and time:
∨
2008/08/08 20:08:08
[ Up] and [ Down]: move the cursor
[ SEL]: modify the value
PRESS (UP,DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
[
Menu]: exit and save
5.13 Hard Disk Set
HARD DISK SET
OVERWRITE ENABLED:
OVERWRITE ENABLED
MASTER HDD SIZ
MASTER HDD USED
MASTER HDD FORMAT
SLAVE HDD SIZE
[YES]
120042MB
If you choose “YES”, recording
continues and overwrites oldest
recordings when the hard drive is full.
If you choose “NO", the
recording process will stop when the
hard drive is full.
80865MB 77%
N/A
N/A
SLAVE HDD USED
SLAVE HDD FORMAT
PRESS (UP, DOWN), ENTER
(SELECT)
PRESS (MENU)
TO EXIT
HDD SIZE:
Indicates the total capacity of the hard drive installed in the DVR.
HDD USED:
Indicates the actual space used on the hard drive and the percentage of hard
drive space used.
HDD FORMAT:
Choose this option to delete all data on a hard drive.
You will be prompted to input your password when formatting the HDD.
Note: When you install a new hard drive in the DVR, please use this function to
format the hard drive for use with the DVR.
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
5.14 Motion Set
MOTION RECORD TIME:
This number indicates how many
seconds the motion detection recording
lasts after the DVR has detected motion.
MOTION SET
MOTION RECORD TIME:
MOTION ALARM TIME:
10
OFF
MOTION ALARM TIME:
This number indicates how many
seconds the buzzer/alarm inside the DVR
will sound after the DVR has detected
motion.
MOTION SET
PRESS (UP, DOWN), ENTER
(SELECT)
PRESS (MENU)
TO EXIT
CONT: Continuous alarm until press any
key is pressed when motion detected.
OFF: No alarm
MOTION SET:
SENSITIVITY:
MOTION DETECTION SET
Use [ Up] and [ Down] button to
highlight the channel you want to modify
and press [ SEL] to adjust sensitivity of
motion detection on each channel.
High (1----------9, OFF) Low
>CHANNEL
CHANNEL
CHANNEL
CHANNEL
1
2
3
4
SENSITIVITY
SENSITIVITY
SENSITIVITY
SENSITIVITY
4
4
4
4
CHANNEL
CHANNEL
CHANNEL
CHANNEL
1
2
3
4
AREA SET
AREA SET
AREA SET
AREA SET
When “OFF”, the channel will not
detect motion or trigger motion recording.
PRESS (UP, DOWN), ENTER
(SELECT)
PRESS (MENU)
TO EXIT
AREA SET:
Use [ Up] and [ Down] button to select the channel you want to modify and
press [ SEL] button to enter the sensitive area of each camera. The picture of the
selected channel is divided into 144(12*12) blocks, press [REW] to move left,
press [FWD] to move right, press[ Up] and [ Down] to move the cursor up and
down, press [ SEL] to set the highlighted block active or disabled.
When the block is transparent, it’s active or set to detect motion. When the
block is covered by a shadow, it is not active and motion will NOT be detected.
Make sure Record Schedule is set to Motion for the times required.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
5.15 Video Mode
Select NTSC (North America) or PAL (Europe/Australia) video system.
5.16 Factory Reset
Press [ SEL] button to reset the DVR to factory defaults. The DVR will
reboot and all custom settings (including password) will be restored to default.
Caution: There is no confirmation dialog box for this selection after you
press [ SEL] button.
If you have forgotten your password and would like to reset, press [Pause]
button 10 times to reset DVR to factory default. Then the default password is now:
[CH1] button 6 times.
If you are unable to stop recording, you must unplug the power supply and
remove the HDD, then reboot the DVR and press [Pause] button for 10 times.
Chapter 6: Recording
6.1 Start Recording
Press [ REC] to start recording (as set in 5.7 Schedule Set).
DVR will display system information on screen.
1
10%
3
R
R
R
R
1
3
2
4
2
4
8
6
5
7
EACH REC [M] (T) 2008/07/01 16:22:30
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
1. Hard Drive Usage (Displayed as a percentage)
2. Recording symbol (channel is currently recording)
3. Camera Number
4. Record Mode (QUAD or EACH)
5. Status (REC, Play, FF1, FF2, FF3, REW, PAUSE)
6. HDD Info. ([M] Master Hard disk)
7. Record Schedule: (T) Time or Manual Record (M) Motion Detection (-) No
Recording
8. The date and time on the DVR
6.2 Stop Recording
Press [ Stop] button to stop recording. If you have already activated the
password protection, you will be prompted to input the password.
6.3 Recording Time on Hard Drive
System
NTSC
Quality
HIGH
Frame Rate
20 K Bytes
15 K Bytes
12 K Bytes
30
58
78
97
15
117
155
194
7
1
251
332
416
1748
2330
2913
NORMAL
LOW
System
PAL
Quality
HIGH
Frame Rate
20 K Bytes
15 K Bytes
12 K Bytes
25
70
12
6
1
146
194
243
291
388
485
1748
2330
2913
NORMAL
LOW
93
117
Estimated record time based on a 120GB Hard Drive (Quad Mode) in hours:
You can calculate and estimate record hours by below formula:
120 (G Byte) × 1024 (M Byte) × 1024 (K Byte)
Divided by:
15 (Kbyte/frame) × 7 (frame/sec.) × 60 (sec.) x 60 (min.)
Estimated time would be 332 Hours.
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
Chapter 7: Playback
Press [ Play] button to play the last recording.
During playback, press the [ Menu] button to list all recorded video clips
from the hard drive. Newest video will be listed at the top.
Press [ Up] and [ Down] to move the cursor and select an event, press
[ Play] button to start playback.
1. Starting time of the event
2. TIME: continuous record
3. MOTION: Motion Triggered event
5. “*” marks un-played video recording
4. FORCE: Force Record event
You can also play recorded video by searching the exact date and time as follows:
1. Press [FWD] button to change the select mode
2. Press [ Up] and [ Down] button to select date starting time or ending time
3. Press [ SEL] to edit time value
4. Press [ Play] to play the video
2008 /0 1 / 0 8
08 : 30 : 3 2 --- 2008/0 1 / 0 8
16 : 00 : 05
Search Date and Time
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
Chapter 8: USB Programming
Using the provided DVR PC Viewer software, you can connect the DVR Alert
to your PC to playback or backup footage.
8.1 PC Viewer Program
1. Insert the CD into your CD-ROM Drive
2. Open CD directory
3. Double click on the “PCViewerInstall.exe” file to install the PC Viewer software
4. Run the installed PC Viewer program
PC Viewer will detect the hard drive installed in the DVR automatically when
you connect the USB cable from DVR to PC.
8.2 Program buttons
1
2
3
4
5
6
7
8
15
10 11 12 13 14
16
17
18
9
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
Item
Remark
1. DVR event list
2. Capture picture
3. Save video clip
5. Load video file saved in PC
6. DVR Mode*
Open event list recorded in DVR
Save an image of current frame
Save DVR’s video clip to PC in .mys/.avi file
Load .mys file saved in PC
To switch working mode between PC viewer
7. PC Mode*
mode and DVR viewer mode
CH1, CH2, CH3, CH4, QUAD
8. Channel selection keys
9. Playing scroll bar
10. Fast backward
11. Previous frame
12. Play backward
13. Pause
Video progress
Play backward with fast speed
Move to previous frame
Play backward with normal speed
Pause playing
14. Play
Play forward with normal speed
Move to next frame
15. Next frame
16. Fast forward
17. Volume scroll bar
18. Exit
Play forward with fast speed
Not available for this model
Exit PC Viewer
‘ DVR Mode: play video clips saved on DVR’s HDD.
‘ PC Mode: play video clips (.mys file) saved on PC
8.3 PC Backup
Press
Press
“.mys” files.
button to open the DVR recorded event list and select an event.
to begin backup. Backup video files can be saved as “.avi” files or
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
Chapter 9: Specifications
ITEM
DESCRIPTION
NOTE
Video Format
NTSC / PAL
Operation System
Camera Input Channel
None
Stand-alone
4 channel Composite BNC
Video Output Channel
Display Frame Rate
1 channel Composite BNC
NTSC
120 frames/second
4×30 frames/second
4×25 frames/second
Quad Mode
PAL
100 frames /second
Max.30 fps (Quad)
Max.25 fps (Quad)
Each Channel =
NTSC
PAL
Recording Frame Rate
Quad Mode
NTSC
PAL
Max. 30 frames/s (Total)
Max. 25 frames/s (Total)
Recording Frame Rate
(Each Mode)
30 fps ÷ Number of Cameras
Each Channel =
25 fps ÷ Number of Cameras
Record Mode
Continuous, Time Schedule, Motion Triggered.
NTSC: 720×480
Display
PAL: 720×576
Resolution
Quad: 640×224 (total)
NTSC: 320×112, 640×224
Record
PAL : 320×136, 640×272
Each: 640×224
Low : 12K Byte
Normal: 15K Byte
High : 20K Byte
ATA -100 Interface
Motion-JPEG
Video Compression Format
(12-20K bytes/frame)
HDD Support
Over 500G Byte
120GB Hard drive @ 7 frames per second @ Normal Quality
(120×1024×1024 Kbyte) ÷ ( 7×15×60×60 ) = 332 Hours
Estimated Record Length
USB
For PC playback & backup
Included
USB 2.0
Remote Control
Method
Time、Date、Event
Search
Full Screen
Dimension ( L × W × H )
YES
250 × 235 × 38mm
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
Chapter 10: Appendix
System Connection Diagram
10.1
DVR Accessories (included)
10.2
Power Cord
Power Adaptor
User’s Manual
The shape of the plug might
be different from different
countries or regions.
Software CD
Remote Controller
USB Cable
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|