en
SUUNTO COMBOS AND
MECHANICAL
INSTRUMENTS
ASSEMBLY INSTRUCTIONS
Combo Consoles I Console Compasses SK-8
Depth Gauge SM-16 I Pressure Gauge SM-36
wnload from Www.Somanuals.com. All Manuals Search And Downlo
SUUNTO COMBO CONSOLES
The Suunto combo consoles for recreational use allow you to create a
personal console according to your own specific needs. Analog gauges,
dive computers and compasses fit together like building blocks.
Suunto console compasses
The Suunto SK-8 is available in two models, each with northern and
sothern hemisphere balancing options. The SK-8 Console Mount, front
attaches to the top of the combo module or the Cobra dive computer.
The SK-8 Console Mount, back attaches to the back side of the combo
module.
Suunto mechanical gauges
There are four Suunto SM-16 depth gauge models: 45 m, 70 m, 150 ft
and 230 ft.
There are two Suunto SM-36 pressure gauge models: 300 bar and 4000
psi.
Adding SM-16 and SM-36 guages to combos always requires a CB-In-
Line module.
1
wnload from Www.Somanuals.com. All Manuals Search And Downlo
SK-8
CB-TWO
+
=
CB-ONE
+
CB-DOUBLE
SK-8
CB-TWO-IN-LINE
SK-8
+
CB-DOUBLE-IN-LINE
CB-THREE-IN-LINE
CB-IN-LINE
=
+
CB-ONE
+
SK-8
2
wnload from Www.Somanuals.com. All Manuals Search And Downlo
1
2
3
(3)
5
4
(5)
1. CB-ONE module front cover with SM-36 pressure gauge in place
(see section CB-ONE Module assembly)
2. CB-IN-LINE module front cover
3. CB-end piece or SK-8 Console Mount, front compass (optional)
4. CB-IN-LINE module back cover with instrument
5. CB-ONE module back cover or SK-8 Console Mount, back
compass (optional)
3
wnload from Www.Somanuals.com. All Manuals Search And Downlo
CB-ONE MODULE ASSEMBLY
The CB-ONE Module is designed to fit the Suunto SM-36 analog
pressure gauges.
Before assembling the CB-ONE module the hose cover needs to be
fitted on the pressure hose. The hose cover ensures that the SM-36
pressure gauge fits properly on the CB-ONE module.
If the Suunto Quick Release is used, see section ‘CB-ONE module
assembly with Quick Release.’
After attaching the hose cover the pressure hose and gauge are
assembled on the CB-ONE front cover according to the picture.
After the pressure gauge is in place, the CB-ONE back cover (or
alternatively the CB-71/SK-8 Console Mount, back compass) is attached
with four screws.
4
wnload from Www.Somanuals.com. All Manuals Search And Downlo
CB-ONE MODULE ASSEMBLY WITH QUICK RELEASE
If the Suunto Quick Release is used, the hose cover should be attached
on the high pressure hose below the female end of the Quick Release.
The male end is attached to the pressure gauge which is then fitted
onto the CB-ONE front cover as shown below.
CB-IN-LINE MODULE ASSEMBLY
The CB-IN-LINE module fits the Suunto Vyper, Vyper Air, HelO2 and
Zoop dive computers or the SM-16 depth gauge.
The Vyper locks into place on the IN-LINE module back cover. For the
other instruments, lugs on the back cover aid alignment.
5
wnload from Www.Somanuals.com. All Manuals Search And Downlo
SUUNTO ZOOP NOVO AND VYPER NOVO
COMBO MOUNT ASSEMBLY
The combo mount for Suunto Zoop Novo and Vyper Novo locks into
place on the IN-LINE module back cover.
6
wnload from Www.Somanuals.com. All Manuals Search And Downlo
BEFORE USE
Depth gauge
Before diving, check the position of the depth indicating pointer.
Atmospheric conditions (altitude, temperature) may cause
misalignment. Turn the adjustment screw located on the right side of
the depth gauge to align the pointer to zero. The adjustment is to be
made at the temperature of usage. Repeated unnecessary adjustments
may cause excessive wear to the seals and eventual leakage.
CAUTION!
Do not attempt to adjust the water entry port located at the left
side of gauge. Tampering with the port can cause damage to
internal components. Do not pressure test gauge in air. Always
immerse the gauge in water while pressure testing it.
Pressure gauge
The hose has an end fitting with 7/16” 20 UNF-thread. If your
regulator has a different thread size in the high pressure (HP-output)
port, ask your dealer for the correct adapter. Always inspect the
O-ring at the male thread to be sure it is clean and undamaged before
connecting it to the regulator.
Always turn your air supply on slowly. Always turn the pressure gauge
dial face away from your face when turning on the air supply.
Do not overtighten the hose at the gauge. The fitting is pressure
resistant even when tightened with fingers.
SERVICE AND CARE
The instruments must be serviced by an authorized dealer every
second year or after 200 dives (whichever comes first).
Avoid subjecting the gauges to excessive shocks such as dropping
or hitting against an immovable object. Do not subject the gauges
to pressures beyond their maximum range. Temperature extremes
can be damaging. In general, the gauges should not be exposed to
temperatures to which you would not expose yourself.
7
wnload from Www.Somanuals.com. All Manuals Search And Downlo
CAUTION: After use, rinse the gauges or the console with fresh water and
store them out of direct sunlight, in a dry place at room temperature.
CAUTION: Do not attempt to clean the gauges with anything other than
water. Use of cleaning agents or compressed air can cause permanent damage.
Inserting objects into the water entry port of the depth gauge or the pressure
relief valve opening of the pressure gauge can damage internal components.
Before prolonged storage, the instruments should be removed from
the console, rinsed with fresh water and stored separately.
CAUTION: Do not attempt to disassemble the gauges. Special tools and
training are required.
8
wnload from Www.Somanuals.com. All Manuals Search And Downlo
TECHNICAL SPECIFICATIONS
The Suunto SM-16 complies with EN 13319. The tolerances are:
At 3m
+0.8 / -0.4 m
+0.8 / -0.4 m
0.8 m
At 6m
At 9m
At 15m
At 30m
At 45m
At 60m
+1/ -1.2 m
+1/ -1.2 m
+1/ -1.5 m
+1 / -1.5 m
The Suunto SM-36 complies with EN 250. The tolerances are:
At 40 bar
At 100 bar
At 200 bar
At 300 bar
5 bar
10 bar
10 bar
10 bar
SM-16
SM-36
Operating temperature 0° to 40° C (32° to 104° F)
Operating temperature 0° to 40° C (32° to 104° F)
9
wnload from Www.Somanuals.com. All Manuals Search And Downlo
SUUNTO CUSTOMER SUPPORT
2. AUSTRALIA +61 1800 240 498
AUSTRIA
CANADA
CHINA
FINLAND
FRANCE
GERMANY
ITALY
+43 720 883 104
+1 800 267 7506
+86 010 84054725
+358 9 4245 0127
+33 4 81 68 09 26
+49 89 3803 8778
+39 02 9475 1965
+81 3 4520 9417
+31 1 0713 7269
+64 9887 5223
+7 499 918 7148
+34 91 11 43 175
+46 8 5250 0730
+41 44 580 9988
+44 20 3608 0534
+1 855 258 0900
JAPAN
NETHERLANDS
NEW ZEALAND
RUSSIA
SPAIN
SWEDEN
SWITZERLAND
UK
USA
© Suunto Oy 11/2005, 09/2006, 11/2011, 3/2015, 4/2016. All rights
reserved.
Suunto is a registered trademark of Suunto Oy.
wnload from Www.Somanuals.com. All Manuals Search And Downlo
|