DEHUMIDIFIER
MODELS: SD-30E / SD-40E / SD-60E
INSTRUCTION MANUAL
Please read these instructions thoroughly and
keep it in a safe place for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU USE YOUR DEHUMIDIFIER, PLEASE READ THIS INSTRUCTION
MANUAL CAREFULLY.
FUNCTIONS
1. Prevents mold growth on clothing, cupboards, doors and drawers.
2. Prevents condensation on ceiling, walls and windows.
3. Dehumidifying is effective on moisture sensitive items like musical instruments, cameras,
computers, etc.
4. Removes dampness from bookshelves and closets.
SAFETY NOTES
1. Do not connect unit to any damaged AC electrical socket.
2. Ensure removable covers and containers are correctly fitted before switching on unit.
3. Always switch unit off when not in use and before unplugging.
4. Do not use in the following locations:
Next to or near a heat source (radiator, heater, dryer, etc.)
Area where oil or water is likely to splash.
Under direct sunlight.
Near a bath, shower or swimming pool.
In a greenhouse.
5. Never insert your finger or other foreign objects into grills or openings. Take special care to
warn children of these dangers.
6. Allow unit to stand upright for at least 24 hours before initial operation and after moving or
tilting the unit. Store the unit upright to maintain the compressor in proper working condition.
7. Always unplug the unit before cleaning and maintenance.
8. Do not cover the unit and it air inlets/outlets.
9. Do not spray insecticides or any other flammable sprays on the machine.
10. Do not spray water on the unit.
11. There are no user serviceable parts. Should the unit or supply cord become damaged,
contact the manufacture immediately.
12. Empty the water tank before moving the dehumidifier.
13. This unit is equipped with auto-defrosting, which operates when the evaporator generates
frost. This function ensures continuous operation when the temperature is down to 41F.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
NAME OF PARTS
CONTROL PANEL
1. POWER Button: Press once to turn unit ON, unit will begin operating in dehumidifying mode
at original factory setting (60%RH). Press again to turn unit OFF.
2. CONTINUOUS Button: When unit is in operation, press this button to set CONTINUOUS
DEHUMIDIFYING mode.
3. TURBO Button: Press this button to set unit in high fan speed.
4. NORMAL Button: Press this button to set unit in low fan speed.
5. POWER Indicator: Will flash slowly when power is connected at the socket (initial power).
Indicator lights up when unit is turned ON and dark if unit is OFF.
6. CONTINUOUS Indicator: Lights up when CONTINUOUS DEHUMIDIFYING mode is
selected.
7. FULL Indicator: Lights up when bucket is full, unit will stop operating.
8. HUMITIDY + Button: Press this button to increase the humidity setting. Range of
adjustment is from 35% ~ 80% RH.
9. HUMIDITY - Button: Press this button to decrease the humidity setting. Range of
adjustment is from 80% ~ 35% RH.
10. TURBO Indicator: Lights up when TURBO button is pressed, unit will run in high fan speed.
11. NORMAL Indicator: Lights up when NORMAL button is pressed, unit will run in low fan
speed.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
MODEL
SD-30E
SD-40E
40 pints per day
115V / 60Hz
52.A
SD-60E
Dehumidifying Capacity
Power Supply
Current
30 pints per day
60 pints per day
4.5A
6.8A
780W
Power Consumption
490W
560W
5 ~ 32C / 41 ~ 89F
13 ~ 35C / 55 ~ 95F
Working Environment
25% RH and above
Water Tank Volume
Net Weight
5 liters / 11 pints
10 liters / 21 pints
55lbs
32lbs
33lbs
Dimension
13.4 L x 10 W x 19.9 H in.
13.4 L x 10 W x 19.88 H in.
** Capacity will vary according to actual room ambient temperature and humidity conditions.
INSTALLATION
Place the dehumidifier on a flat surface and in a location where the air inlets and outlets will not
be obstructed. Do not install underneath desks or inside cupboards, as this will restrict the
airflow. Keep unit at least 40 inches away from televisions and radios as the unit may disrupt the
image or sound. Maintain a minimum clearance of 20cm (7.5 in.) to the front and rear of unit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
Operating Conditions:
This unit is designed to operate with a working environment between 41 ~ 90F.
If the unit has been switched off, please wait 3 minutes before switching on again. If
switched on immediately, allow 3 minutes for unit to resume correct operation.
Do not connect unit to a multiple socket outlet with other electrical appliances.
Select a suitable location, with easy access to an electrical outlet.
Plug the unit into an 115V~ 60Hz electrical socket with earth connection.
Make sure the water tank is correctly fitted or unit will not operate.
Turning the unit ON or OFF:
1. Plug the cord to a proper power requirement. The unit’s computer system will have a self-
check. If normal, POWER indicator will flash at 0.5Hz. Press the POWER button to start
operation. Unit will begin to operate at 60% humidity setting, press + or – to change humidity
setting.
2. Press CONTINUOUS button to run in continuous dehumidifying mode. In continuous mode,
+ or – buttons are disabled.
3. Press POWER button again to turn off unit. You do not need to unplug the cord except when
unit will not be used for a long period of time.
OPERATION
Water Tank:
When water tank is full, unit will stop operating and FULL indicator light will flash.
Never remove the water tank while unit is in operation.
Grip the left and right handles securely and carefully pull straight out. Do not place tank on
the floor, as the bottom of the tank is not even and will tilt. Empty the water and gently push
the tank all the way in. Ensure the tank is correctly positioned.
The unit will re-start when the tank is restored in its correct position.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Continuous Drainage:
Remove the plastic cover located at the rear of the unit.
Push the drain hose into the drain hole (see image below)
Remove the water tank and securely attach the drain hose to the connector (see image
below)
The hose should be smooth and without bends or kinks.
Place the end of the hose to a suitable drainage facility.
MAINTENANCE
Important!
Be sure to unplug the unit before cleaning.
Do not use petrol, thinners or other chemical agents to clean the unit as this may damage
the unit.
Do not wash the unit directly under water. The electrical components inside may be
damages and cause the unit to become unsafe.
Air Filter
Clean the air filter at least once every two weeks to prevent impaired performance.
Pull the air filter out as shown in Fig. A.
Wash the air filter with clean water and allow dry completely.
Replace cleaned filter as shown in Fig. C.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Housing
Use a soft, clean cloth to wipe the surface. Do not use water as this may cause an electrical
fault or shock hazard.
Water Tank
Wash the tank using warm water and neutral detergent. Rinse and allow dry, replace when dry.
Power Cord
Wrap the cord and bundle it with a band.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
BEFORE COTACTING THE MANUFACTURER, PLEASE CHECK THE FOLLOWING
POSSIBILITIES.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Switch power ON
Restore power cord
Re-position water tank
Empty water tank
After defrosting, unit will
dehumidify again
Power is OFF
Power cord is unplugged
Water tank not fitted correctly
Water tank is full
Unit fails to operate
Defrosting
Blocked air filter
Wash nylon filter
Close windows and doors
Remove obstacles
Reposition unit
Performance decreased
Unit is noisy
Room windows and doors are open
Obstacles in air outlet or inlet
Unstable setting of unit
Blocked filter
Wash nylon filter
The following displays indicate an error or problem:
Display code
Problem
What to do
Unit will automatically restart
after defrosting
Empty the tank
Turn off unit and contact
Sunpentown.
P1
P2
E1
Defrosting starts
Water tank is full
Humidity sensor is off or short-
circuit
Temperature sensor is off or
short-circuit
Turn off unit and contact
Sunpentown.
E2
If you still cannot solve the problem after trying the above, unplug unit and contact
Sunpentown Int’l Inc.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Guarantee
If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of
purchase, it will be repaired free of charge.
This guarantee is subject to the following terms:
Sunpentown must be notified of the fault.
Proof of purchase must be presented to Sunpentown’s nominated representative.
The warranty will be void if the product if modified, misused or repaired by an unauthorized person.
The warranty after repair will not be extended beyond the original one-year period.
All replacement parts will be new or reconditioned.
Parts, which are replaced, become the property of Sunpentown.
The warranty applies for the use of the product in the USA only.
What is NOT COVERED:
Warranty does not include freight charges.
Incidental or consequential damage caused by possible defects with this product.
Damage to product caused by improper power supply voltage, accident, fire, floods or acts of nature.
Failure of product resulting from unauthorized modifications to the product.
Improper installation or failure to perform the necessary maintenance.
This GUARANTEE is in addition to your Statutory Rights
SUNPENTOWN INTERNATIONAL INC.
21415 Baker Parkway, City of Industry, CA 91789-5236
909-468-5288
Fax:909-468-5279
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|