Sunbeam Blood Pressure Monitor 7689 User Manual

AUTOMATIC WRIST  
BLOOD PRESSURE  
MONITOR  
One piece, one step  
Model  
7689  
Important Notes:  
Only a physician is qualified to interpret  
changes in your blood pressure. This device is  
not intended to replace regular medical exami-  
nations. It is recommended that your physician  
review your procedure for using this monitor.  
Never make adjustments to your medication  
unless it is the advice of a physician.  
Please read this manual carefully before using  
this device. This Blood Pressure Monitor is  
intended for use by adults only. Children should  
not use this monitor unless it is under the  
supervision of an adult.  
Please read these instructions carefully before  
using this Blood Pressure Monitor.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Helpful information  
What is Blood Pressure?  
Blood pressure is the force that blood exerts on  
the arteries. This force is constantly changing as  
the heart beats. When the heart contracts, blood  
pressure reaches its highest value. This is called  
systolic blood pressure. When the heart relaxes  
between beats, the value of blood pressure is  
lower. This is called the diastolic blood pressure.  
The unit of measure for blood pressure is the mil-  
limeter of mercury, abbreviated  
For example, an individual’s blood pressure may  
be measured as 120  
(systolic) and 80  
(diastolic). This would be spoken as “120  
over 80” and written as  
Remember  
that blood pressure varies throughout the day.  
Food intake, smoking, time of day, stress, level  
of exercise and many other factors can affect it.  
Typical daily blood pressure fluctuations  
(Example:  
male)  
What is High Blood Pressure?  
Hypertension, or high blood pressure, is a condi-  
tion where an individual’s blood pressure  
Download from Www.Somanuals.com. All Manuals Search And Download.  
remains high over a long period of time.  
Untreated, hypertension can cause many seri-  
ous medical problems including strokes and  
heart attacks. To control hypertension, the  
American Heart Association recommends that  
you not smoke, reduce fat and salt intake, main-  
tain proper weight, exercise and get regular  
physical check-ups.  
Why Is It Important to Measure Your Blood  
Pressure at Home?  
Having your blood pressure taken at the doctor’s  
office may cause you to become nervous, thus  
artificially raising your reading. Having the ability  
to take your blood pressure at home makes it easy  
to record a log of your daily readings. This will  
help you gain a greater understanding of your  
blood pressure reading and the factors that effect  
it. Be sure that you share your information with  
your physician.  
Hints for Accurate Measurement  
1) Relax and try to remain still for 5 to 10 min-  
utes before a measurement.  
2) Remove shirts or other tight-fitting garments  
on the wrist (for example wristwatches) and  
upper arm before applying the wrist cuff.  
3) Refrain from eating, smoking, and drinking  
(especially alcoholic beverages) before a  
measurement since these activities can  
affect your blood pressure.  
4) Remember that blood pressure varies contin-  
uously throughout the day. Try to take your  
Download from Www.Somanuals.com. All Manuals Search And Download.  
blood pressure at  
time each day.  
5) Do not be concerned with the results of one  
measurement. Many measurements, record-  
ed over a long period of time, will provide a  
better indication of your blood pressure.  
6) Please relax for 5 to 10 minutes before taking  
another measurement.  
7) Many factors can affect your blood pressure  
such as exercising, eating, talking, moving,  
nervousness, environment and temperature  
changes. Emotional stress can cause an  
increase in blood pressure. Daily fluctuations  
of 25 to 50  
are common.  
Using a Wrist Unit  
Taking your blood pressure at the wrist may  
give different readings than from the upper arm  
as is done in most doctor offices. Because of  
the location of measurement and differences in  
arterial diameters, a healthy person may see a  
maximum difference oft/- 10  
in both  
systolic and diastolic measurements, versus  
those taken with an arm unit with cuff.  
Please note: Some individuals with hypertension,  
diabetes, kidney disorders, arteriosclerosis or  
poor circulation may see a significant difference  
in blood pressure readings taken from the wrist  
as compared to readings from the upper arm. It  
is recommended that you consult with your  
physician concerning the use of this monitor.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Correct Method of Measurement  
To obtain the most accurate blood pressure  
measurement, please follow these important,  
directions.  
l
Be seated in a chair with back support.  
Rest your arm on a table so the cuff is at the  
same level as your heart.  
l
l
l
Use the storage case or similar item to sup-  
port the forearm. (see diagram A)  
Place both feet on the ground.  
Storage Case  
Diagram A  
IMPORTANT: The wrist cuff must be at the  
same level as your heart, or accurate measure-  
ment will not be possible. (Your heart is located  
slightly below your left armpit).  
Getting to Know Your Wrist Unit  
Model No. 7689  
D
‘Button  
Accessories:  
ON/OFF Button
Start Button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storage Case  
A
Preparation Before Taking a Measurement  
Battery Installation/Replacement  
1) Slide the battery cover  
off in the direction of  
the arrow.  
2) Install or replace the  
two AA batteries, noting  
the proper orientation  
of positive (t) and neg-  
ative (-) terminals of  
the batteries in the  
battery compartment.  
Alkaline batteries are  
recommended.  
3) Replace the battery  
cover.  
4) If the Low Battery Symbol appears on the  
display, replace both batteries.  
5) Remove the batteries if the unit will not be  
used for an extended period of time.  
How to Apply the Wrist Cuff  
(These directions are for either right or left hand  
measurements.)  
1) With your palm side up,  
apply the cuff so that the  
cuff’s edge should be  
approximately  
to  
inch from your palm. You  
can use the width of your  
forefinger as a simple  
way to measure the dis-  
tance between the cuff  
Download from Www.Somanuals.com. All Manuals SeDaricahgArnadmDowBnload.  
and palm. (diagram  
5
Do not apply wrist unit  
on top of a shirt sleeve.  
Wrap the cuff snugly  
around your wrist and  
attach using the fas-  
tener. The top and bot-  
tom edges of the cuff  
should be tightened  
evenly around your  
wrist. (diagram C)  
Diagram C  
Any gap between the  
wrist and cuff will  
affect the result of  
measurement.  
The fabric cuff can be  
folded down for ease  
of viewing the display.  
(diagram  
Diagram D  
Taking a Measurement  
Please review the previous sections on proper  
placement of the cuff and proper arm position.  
1) After the cuff has been properly placed on  
either the right or left wrist, press the ON/OFF  
button. All display symbols will appear  
momentarily. Note: The low battery symbol  
will also appear at this time. This does not  
indicate a low battery unless the low battery  
symbol remains on continuously.  
2) After the display reads  
button.  
press the START  
3) The cuff will automatically inflate to an appropri-  
ate pressure, and will then begin to slowly deflate  
Downloaasd friotmtWakwews.Stohmeanmuaelas.scuormem. Aelnl tMaTnhueals cSuefaf rcwh iAllndbDeowqnuloitead.  
snug for a short while; this is normal. Try to remain  
relaxed, refrain from talking, and be as still as pos-  
sible during the measurement Note: If the unit  
determines that the initial inflation pressure was  
insufficient, it will re-inflate to a higher pressure.  
4) After the measurement cycle is finished, the  
unit will release any remaining air in the cuff.  
The systolic and diastolic pressure will be dis-  
played for 5 seconds and then be replaced by  
the pulse rate. The blood pressure reading and  
pulse rate will then be displayed alternately.  
For any reason you feel a need to end a meas-  
urement, just press the ON/OFF button to turn  
off the monitor and release the cuff pressure.  
If during a measurement the power drops to an  
insufficient level, the monitor will end the meas-  
urement and display the low battery symbol.  
Please replace the batteries and repeat the  
measurement.  
If the monitor cannot detect your pulse, it will  
end the measurement attempt. Wait a few min-  
utes, make sure that the cuff is positioned prop-  
erly, and try again.  
The monitor will automatically shut off 3 minutes  
following a reading, or it can be turned off man-  
ually by pressing the ON/OFF button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memory Function  
Memory Input  
Your Sunbeam Wrist Blood Pressure Monitor has  
a memory feature. When a valid measurement is  
made, the reading data (systolic, diastolic and  
pulse rate) will be stored in the memory auto-  
matically as soon as the unit is turned off,  
automatically shuts off, or when another  
measurement is initiated. The monitor has the  
capacity to store 14 readings, and also computes  
an average of all memory readings. When more  
than 14 readings are taken and recorded to  
memory, the oldest ones will be lost.  
Memory Recall  
To recall your last reading, press the MEMORY  
button. A “1” will appear in the lower right hand  
corner of the display which represents the  
newest memory reading. When the memory but-  
ton is pressed again, the display will show  
which represents the second newest reading,  
and so on. The memory will recall up to 14 pre-  
vious readings. When the letter “A” appears in  
the display, the average value of your systolic,  
diastolic and pulse rate based on the memory  
readings is shown.  
Memory Erase  
When the batteries are taken out of the monitor,  
all records of readings saved in memory will be  
erased. NOTE: When taking a measurement,  
the MEMORY button is inactive.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Indication: Cuff pressure  
reaches 330  
Cause:  
Twisted bladder  
inside of the cuff.  
Correction: Make sure that  
the bladder  
lays flat within  
the cuff.  
Indication: Displays “Err’:  
cuff pressure  
releases and  
pressure  
displays.  
Cause:  
Excessive arm  
movement or  
talking during  
measurement.  
Correction: Press Start  
button to  
measure  
again while  
keepinq still.  
Indication: Could not obtain  
pulse rate.  
Cause:  
Cuff was loosely  
applied, extremely  
weak pulse  
or arrhythmia.  
Correction: Reapply cuff and  
measure aaain.  
Batteries are-exhausted.  
Replace with new alkaline  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AA batteries.  
Troubleshooting  
Problem  
Nothing appears in  
display  
Recommended Action  
l
Make sure that the  
batteries are properly  
installed (Battery  
polarity matches the  
indications in the  
battery case.)  
Check that the cuff is  
positioned properly.  
Go over the  
l
l
No measurement  
occurs  
measurement  
procedure again.  
Check if the wrist  
is positioned properly.  
Remain seated during  
the entire measurement  
period.  
Hold your arm so that  
the cuff is level with  
your heart during  
measurement.  
l
l
Blood pressure  
readings are  
too high or low  
l
l
Refrain from hand and  
body movements  
during measurement.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (cont.)  
Problem  
Blood pressure  
readings  
are variable  
Recommended Action  
Your blood pressure  
can fluctuate  
l
considerably through  
out the day.  
l
All of the following  
factors can influence  
your blood pressure:  
Emotional state  
2) Daily activities or  
exercise  
3) Smoking  
4) Drinking alcoholic  
beverages  
5) Eating  
Taking certain  
medications  
Care and Maintenance  
and  
Only clean the monitor with a soft, dry cloth.  
Do not use solvents or other petroleum based  
liquids.  
Keep the unit out of locations with high tem-  
peratures, high humidity and direct sunlight.  
Keep sharp objects away from the cuff.  
Remove the batteries if the monitor will not  
be used for extended periods of time.  
NOTE: Removing the batteries will erase  
all readings in memory.  
Do not stretch or twist the wrist cuff.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Care and Maintenance (cont.)  
Cleaning and storage  
l
Do not press the START button without the  
cuff around your wrist.  
l
Do not disassemble or modify the monitor or  
the wrist cuff.  
Do not drop or subject the monitor to strong  
mechanical shock.  
l
7 6 8 9  
Measurement Location  
Wrist  
LCD size 40.5 x 33 mm  
7 x 12 mm  
Display  
Digit size  
Measurement type  
Inflate System  
Oscillometric  
Automatic, with Fuzzy Logic  
pressure level determination  
Pressure:  
0
300  
Measurement range  
Accuracy  
Pulse: 30 190  
Cuff Pressure:  
Pulse rate:  
3
5%  
Performance: Designed  
to meet  
SP-10 standards  
Auto air-release valve  
Velcro fastener with  
spring support  
Exhaust  
cuff  
14 readings with average  
calculation.  
Memory  
Operation Environment  
Less than 85% relative  
humidity  
Storage Environment  
-10” C to  
C
Less than 95% relative  
humidity  
2
“AA” batteries  
Power Source  
Dimension  
Weight  
81x72x33.5 mm  
approx. 250 grams with  
batteries.  
Cuff size  
77x312 mm  
Wrist  
circumference  
135 to 220 mm (approx. 5.3  
to 8.6 inches)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 2  
1 Year limited Warranty  
Sunbeam Products, Inc. “Sunbeam” warrants that  
for a period of one year from the date of purchase,  
this product will be free from defects in material  
and workmanship. Sunbeam, at its option, will  
repair or replace this product or any component of  
the product found to be defective during the war-  
ranty period. Replacement will be made with a  
new or remanufactured product or component.  
If the product is no longer available, replacement  
may be made with a similar product of equal or  
greater value. This is your exclusive warranty.  
This warranty is valid for the original retail pur-  
chaser from the date of initial retail purchase and  
is not transferable. Keep the original sales  
receipt. Proof of purchase is required to obtain  
warranty performance. Sunbeam dealers, service  
centers, or retail stores selling Sunbeam products  
do not have the right to alter, modify or any way  
change the terms and conditions of this warranty.  
This warranty does not cover normal wear of  
parts or damage resulting from any of the follow-  
ing: negligent use or misuse of the product, use  
on improper voltage or current, use contrary to  
the operating instructions, disassembly, repair or  
alteration by anyone other than Sunbeam or an  
authorized service center. Further, the warranty  
does not cover Acts of God,  
hurricanes and tornadoes.  
fire, flood,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Sunbeam shall not be liable for any incidental or  
consequential damages caused by the breach  
of any express or implied warranty. Except to  
the extent prohibited by applicable law, any  
implied warranty of merchantability or fitness  
for a particular purpose is limited in duration to  
the duration of the above warranty. Some  
states, provinces or jurisdictions do not allow  
the exclusion or limitation of incidental or con-  
sequential damages or limitations on how long  
an implied warranty lasts, so  
limita-  
tions or exclusion may not apply to you. This  
warranty gives you specific legal rights, and you  
may also have other rights that vary from state  
to state or province to province.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Obtain Warranty Service  
Take the product to an authorized Sunbeam serv-  
ice center. You can find the nearest authorized  
Sunbeam service center by calling l-800-435-1250.  
If a service center is not conveniently located,  
attach a tag to the product that includes your  
name, address, daytime telephone number and  
description of the problem. Include a copy of the  
original sales receipt. Carefully package the prod-  
uct and send either by UPS or Parcel Post with  
shipping and insurance prepaid to:  
For products purchased in the United States:  
Sunbeam Products, Inc.  
117 Central Industrial Row,  
Purvis, MS 39475  
Do not return this product to the place of purchase.  
If you have any questions regarding this warranty  
please call l-800-435-1250 or write to:  
Sunbeam Consumer Care Center  
P.O. Box 948389  
Maitland, FL 32794-8389  
0 1 9 9 9 S u n b e a m P r o d u c t s , I n c . ,  
S U N B E A M ” a n d H E A L T H A T  
its  
c o m p a n i e s , a l l r i g h t s r e s e r v e d .  
a t e r e g i s t e r e d t r a d e m a r k s o f S u n b e a m P r o d u c t s , I n c . ,  
its  
c o m p a n i e s . D i s t r i b u t e d b y S u n b e a m P r o d u c t s . I n c . ,  
F l o r i d a 3 3 4 3 1 .  
I m p a r t e d b y S u n b e a m P r o d u c t s , I n c .  
Download from Www.Somanuals.com. All Manuals Search Andi nDownload.  
M o d e l  
7689  
P. N. 103751  
P r i n t e d  
T a i w a n  

Sigma Water Heater Force Flow Heaters User Manual
Soleus Air Air Conditioner KFMHP 18 ID User Manual
Sony Camcorder HVR Z1U User Manual
Sony Camera Lens 59 User Manual
Sony Car Stereo System CDX GT500 User Manual
Sony CRT Television KV T21 KV T25 KV 2168 User Manual
Sony Ericsson Cell Phone Accessories MCA 25 User Manual
Sony Portable CD Player D C21 User Manual
Sony Speaker System SS ZX10 User Manual
SUPER MICRO Computer Server 6025B UR User Manual