Sub Zero Refrigerator ICBBI 30U User Manual
INTERNATIONAL DESIGN GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
3
subzero.com/specs  
Built-In Refrigeration. For the built-in line, Sub-Zero designers and engineers took a fresh look at everything, inside  
and out. Exterior refinements include redesigned grilles and lower-profile hinges. Inside, new technology in food preserva-  
tion makes the built-in line nothing short of revolutionary.  
BUILT-IN MODELS  
914 mm  
914 mm  
762 mm  
914 mm  
2134  
mm  
2134  
mm  
ICBBI-36R  
ICBBI-36F  
ICBBI-30U  
ICBBI-36U  
914 mm  
1067 mm  
1067 mm  
1219 mm  
1219 mm  
2134  
mm  
ICBBI-36S  
ICBBI-42S  
ICBBI-42SD  
ICBBI-48S  
ICBBI-48SD  
KEY FEATURES  
•
•
•
•
Three distinct design approaches: overlay, flush inset  
and stainless steel.  
•
•
Advanced air purification system.  
Crisper and deli drawers form a lower-temperature  
zone for produce and meats.  
Handle options coordinate with handles of Wolf  
cooking products.  
•
•
Flip-up grille provides easy access for quick routine  
maintenance.  
Dual refrigeration; two compressors preserve food’s  
goodness in two sealed compartments.  
All models are Star-K certified.  
Energy efficient.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
4
Built-In Models  
All Refrigerator / All Freezer Models  
SPECIFICATIONS  
OVERALL DIMENSIONS  
Interior Capacity  
R (L)  
F (L)  
914 mm  
610 mm  
ALL REFRIGERATOR / ALL FREEZER MODELS  
ICBBI-36R  
ICBBI-36F  
662  
640  
OVER-AND-UNDER MODELS  
ICBBI-30U  
ICBBI-36U  
362  
451  
116  
149  
SIDE-BY-SIDE MODELS  
2134  
mm  
ICBBI-36S  
ICBBI-42S  
ICBBI-42SD  
ICBBI-48S  
346  
455  
453  
533  
531  
227  
227  
230  
270  
274  
1873  
mm  
ICBBI-48SD  
Shipping Weight  
kg  
ALL REFRIGERATOR / ALL FREEZER MODELS  
ICBBI-36R  
ICBBI-36F  
191  
184  
OVER-AND-UNDER MODELS  
ICBBI-30U  
ICBBI-36U  
210  
234  
HEIGHT DIMENSIONS 13 mm  
102 mm  
606 mm  
SIDE-BY-SIDE MODELS  
ICBBI-36S  
ICBBI-42S  
ICBBI-42SD  
ICBBI-48S  
244  
264  
276  
286  
298  
606  
mm  
ICBBI-48SD  
432  
mm  
946  
mm  
60 mm  
MODELS ICBBI-36R AND ICBBI-36F  
Shipping weights and overall dimensions are based on  
stainless steel models. For flush inset applications, add  
13 mm to door clearance dimensions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
5
subzero.com/specs  
Over-and-Under Models  
OVERALL DIMENSIONS  
762 mm  
610 mm  
914 mm  
610 mm  
2134  
mm  
2134  
mm  
1289  
mm  
1289  
mm  
584  
mm  
584  
mm  
HEIGHT DIMENSIONS 13 mm  
HEIGHT DIMENSIONS 13 mm  
606 mm  
606 mm  
102 mm  
102 mm  
606  
mm  
606  
mm  
368  
mm  
432  
mm  
600  
mm  
600  
mm  
796  
mm  
946  
mm  
60 mm  
60 mm  
MODEL ICBBI-30U  
MODEL ICBBI-36U  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
6
Side-by-Side Models  
OVERALL DIMENSIONS  
914 mm  
610 mm  
1067 mm  
610 mm  
2134  
mm  
2134  
mm  
1873  
mm  
1873  
mm  
HEIGHT DIMENSIONS 13 mm  
HEIGHT DIMENSIONS 13 mm  
606 mm  
606 mm  
102 mm  
102 mm  
606  
mm  
606  
mm  
216  
mm  
260  
mm  
222  
mm  
318  
mm  
565  
mm  
668  
mm  
60 mm  
60 mm  
MODEL ICBBI-36S  
MODELS ICBBI-42S AND ICBBI-42SD  
Overall dimensions are based on stainless steel models.  
For flush inset applications, add 13 mm to door clearance  
dimensions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
7
subzero.com/specs  
Side-by-Side Models  
OVERALL DIMENSIONS  
1219 mm  
610 mm  
2134  
mm  
1873  
mm  
HEIGHT DIMENSIONS 13 mm  
606 mm  
102 mm  
606  
mm  
248  
mm  
356  
mm  
762  
mm  
60 mm  
MODELS ICBBI-48S AND ICBBI-48SD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
8
Built-In Models  
STANDARD INSTALLATION  
TOP VIEW  
610 mm  
OPENING  
DEPTH  
610 mm  
OPENING DEPTH  
2127 mm  
OPENING  
HEIGHT  
A
OPENING WIDTH  
SIDE VIEW  
FRONT VIEW  
IMPORTANT NOTE: If two units are installed side by side,  
refer to pages 21–22 for dual standard installations.  
Opening Width  
A
902 mm  
746 mm  
902 mm  
902 mm  
ICBBI-36R and ICBBI-36F  
ICBBI-30U  
Stainless steel models are ready to install out of the box.  
ICBBI-36U  
ICBBI-36S  
ICBBI-42S and ICBBI-42SD  
ICBBI-48S and ICBBI-48SD  
1054 mm  
1206 mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
9
subzero.com/specs  
Planning Information  
ELECTRICAL REQUIREMENTS  
PLUMBING REQUIREMENTS  
International models from the factory designed without a  
transformer require a 220-240 V AC, 50/60 Hz electrical  
supply, fused at the correct rating for the unit. If required  
by local or national codes, the power cord can be easily  
replaced using the power inlet device.  
For built-in models with an automatic ice maker, the water  
supply line should be located within the shaded area  
shown in the illustrations. The water supply line should be  
connected to the house supply with an easily accessible  
shut-off valve between the supply and the unit. Do not use  
self-piercing valves. A saddle valve kit (4200880) is avail-  
able through your authorized Sub-Zero dealer. The water  
line must not interfere with installation of the anti-tip  
brackets.  
For all built-in models, the electrical supply should be  
located within the shaded area shown in the illustration.  
Follow local codes and ordinances when installing the  
receptacle. A separate circuit servicing only this appliance  
is required. A ground fault circuit interrupter (GFCI) is not  
recommended and may cause interruption of operation.  
IMPORTANT NOTE: A reverse osmosis system can be  
used provided there is constant water pressure of 2.1 bar  
to 6.9 bar supplied to the unit at all times.  
Electrical Requirements  
Plumbing Requirements  
Power Supply  
Circuit Breaker  
Receptacle  
220-240 V AC, 50/60 Hz  
10 amp  
Water Supply Line  
6.35 mm OD copper line  
2.1–6.9 bar  
Water Pressure  
3-prong grounding-type  
Excess Water Line for Connection  
914 mm  
FRONT VIEW  
13 mm  
BACK WALL  
178  
mm  
E
457 mm  
152  
mm  
152  
mm  
457 mm  
152  
mm  
1918 mm  
FROM  
FLOOR  
76 mm  
FLOOR  
FRONT VIEW  
TOP VIEW  
Location of electrical supply.  
Location of water supply—  
rear.  
Location of water supply—  
bottom.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
Overlay Panels  
10  
If you and your client have ordered an overlay model, you  
will be adding panels and handles to give the unit a more  
custom look. The overlay panel design option is available  
for all built-in overlay models. For exact door panel dimen-  
sions, refer to overlay panel specifications on the following  
pages.  
The illustrations provide a cross section view of the three-  
panel assembly, showing placement of the trim and a rear  
view of the three-panel assembly with critical dimensions,  
standard for all built-in models.  
Overlay grille panels for the panel grille match the design  
of the overlay door panels. Dimensions for the grille panel  
are listed in the overlay panel specifications on the follow-  
ing pages.  
IMPORTANT NOTE: Overlay models can be used in an  
overlay or a flush inset application. Be aware that the  
application specified will affect panel sizes, rough opening  
dimensions and installation.  
IMPORTANT NOTE: When installing two units in a side-by-  
side application, refer to pages 21–22 for dual standard  
installations. Be aware that rough opening dimensions are  
different for this application.  
The overlay design allows decorative panels to cover the  
door trim for a more seamless appearance that blends  
with the design of the room. The most common way to  
achieve this look is to work with three panels—the decora-  
tive overlay panel, which is typically 19 mm, a 3 mm  
spacer panel and a 6 mm backer panel. Depending on  
your cabinet manufacturer, this could also be one panel  
routed for different dimensions.  
Do not exceed overlay panel dimensions, as this could  
cause damage to panels and the Sub-Zero unit.  
Regardless of the physical construction of the panels  
(three-panel assembly or routed panel), you will need to  
follow the overlay panel specifications on the following  
pages for exact sizing and panel placement to ensure a  
proper fit.  
OVERLAY  
PANEL  
SPACER  
PANEL  
SPACER PANEL  
OVERLAY PANEL  
BACKER PANEL  
TRIM  
BACKER  
PANEL  
Overlay Panel Requirements  
MAX WEIGHT PER PANEL  
All Overlay Models  
Grille Panel  
23 kg  
6 kg  
8 mm min  
3 mm  
19  
6
mm  
3
MIN PANEL THICKNESS  
mm  
typical  
mm  
All Overlay Panels  
16 mm  
Panel assembly cross section. Panel assembly rear view.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
11  
subzero.com/specs  
Overlay Panels  
H
H
H
W
ICBBI-30U / ICBBI-36U  
Model ICBBI-30U  
Model ICBBI-36U  
REFRIGERATOR  
Overlay Panel  
Spacer Panel  
Backer Panel  
W
762 mm  
740 mm  
756 mm  
H
1273 mm  
1253 mm  
1268 mm  
REFRIGERATOR  
Overlay Panel  
Spacer Panel  
Backer Panel  
W
914 mm  
892 mm  
908 mm  
H
1273 mm  
1253 mm  
1268 mm  
FREEZER  
W
762 mm  
740 mm  
756 mm  
H
483 mm  
459 mm  
475 mm  
FREEZER  
W
914 mm  
892 mm  
908 mm  
H
483 mm  
459 mm  
475 mm  
Overlay Panel  
Spacer Panel  
Backer Panel  
Overlay Panel  
Spacer Panel  
Backer Panel  
GRILLE  
W
762 mm  
740 mm  
756 mm  
H
235 mm*  
211 mm  
227 mm  
GRILLE  
W
914 mm  
892 mm  
908 mm  
H
235 mm*  
211 mm  
227 mm  
Overlay Panel  
Spacer Panel  
Backer Panel  
Overlay Panel  
Spacer Panel  
Backer Panel  
*Panel height may be increased by 13 mm to hide upper main  
frame. For more information, refer to the built-in panel config-  
urator at subzero.com/trade/panels.  
Grille panel dimensions listed are for a standard 2134 mm  
finished height. For a 2108 mm finished height, subtract 25  
mm from grille panel height dimensions. For a 2235 mm  
finished height, add 102 mm to height dimensions. A 2108  
mm or 2235 mm panel grille must be ordered to accept a  
2108 mm or 2235 mm custom panel. Width dimensions do  
not vary.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
12  
Overlay Panels  
H
H
H
H
A
B
W
W
W
W
ICBBI-36S / ICBBI-42S / ICBBI-48S  
ICBBI-48SD  
Model ICBBI-36S  
Models ICBBI-48S and ICBBI-48SD  
REFRIGERATOR  
Overlay Panel  
Spacer Panel  
Backer Panel  
W
H
REFRIGERATOR  
Overlay Panel  
Spacer Panel  
Backer Panel  
W
730 mm  
708 mm  
724 mm  
H
510 mm  
487 mm  
503 mm  
1772 mm  
1751 mm  
1767 mm  
1772 mm  
1751 mm  
1767 mm  
FREEZER  
W
398 mm  
376 mm  
392 mm  
H
1772 mm  
1751 mm  
1767 mm  
FREEZER  
W
483 mm  
460 mm  
476 mm  
H
1772 mm  
1751 mm  
1767 mm  
Overlay Panel  
Spacer Panel  
Backer Panel  
Overlay Panel  
Spacer Panel  
Backer Panel  
GRILLE  
W
914 mm  
892 mm  
908 mm  
H
235 mm*  
211 mm  
227 mm  
GRILLE  
W
H
235 mm*  
211 mm  
227 mm  
Overlay Panel  
Spacer Panel  
Backer Panel  
Overlay Panel  
Spacer Panel  
Backer Panel  
1219 mm  
1197 mm  
1213 mm  
ICBBI-48SD  
W
149 mm  
A
H
316 mm  
B
Dispenser Cut-Out  
Model ICBBI-42S  
Cut-Out Location  
51 mm  
732 mm  
REFRIGERATOR  
Overlay Panel  
Spacer Panel  
Backer Panel  
W
637 mm  
614 mm  
630 mm  
H
1772 mm  
1751 mm  
1767 mm  
*Panel height may be increased by 13 mm to hide upper main  
frame. For more information, refer to the built-in panel config-  
urator at subzero.com/trade/panels.  
FREEZER  
W
424 mm  
402 mm  
418 mm  
H
1772 mm  
1751 mm  
1767 mm  
Overlay Panel  
Spacer Panel  
Backer Panel  
Grille panel dimensions listed are for a standard 2134 mm  
finished height. For a 2108 mm finished height, subtract 25  
mm from grille panel height dimensions. For a 2235 mm  
finished height, add 102 mm to height dimensions. A 2108  
mm or 2235 mm panel grille must be ordered to accept a  
2108 mm or 2235 mm custom panel. Width dimensions do  
not vary.  
GRILLE  
W
1067 mm  
1045 mm  
1060 mm  
H
235 mm*  
211 mm  
227 mm  
Overlay Panel  
Spacer Panel  
Backer Panel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
13  
subzero.com/specs  
Flush Inset Application  
It is necessary to consider the following points when  
planning for a flush inset application:  
FLUSH INSET INSTALLATION  
WITH 19 mm PANEL  
STANDARD INSTALLATION  
•
•
•
The flush inset depth is 56 mm deeper than the  
standard opening.  
610 mm  
OPENING  
DEPTH  
610 mm  
OPENING  
DEPTH  
665 mm  
FLUSH  
INSET  
The flush inset width is 64 mm wider than the  
standard opening.  
DEPTH  
The flush inset height is 6 mm higher than the  
standard opening.  
TOP VIEW  
TOP VIEW  
56 mm  
32 mm  
•
•
Panel widths increase to achieve the flush inset look.  
You must allow a 13 mm reveal around the perimeter of  
the unit and grille to allow for proper door swing and  
airflow.  
Standard installation.  
Flush inset installation.  
IMPORTANT NOTE: The flush inset application is not a  
separate model. This is an overlay unit in a flush installa-  
tion. The same model is used in an overlay or flush inset  
application.  
Rough opening dimensions for the flush inset application  
assume the use of a 19 mm decorative panel. The illustra-  
tions at right show the difference between standard and  
flush inset installations.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
14  
Built-In Models  
FLUSH INSET INSTALLATION  
TOP VIEW  
665 610 mm  
665 610 mm  
TOP VIEW  
CLEAT  
mm  
DEPTH  
mm  
OPENING  
DEPTH  
FLUSH  
INSET  
DEPTH  
TO CLEAT  
FLUSH  
INSET  
DEPTH  
TO CLEAT  
32  
UNIT WITH  
19 mm PANEL  
CLEAT  
mm  
76 mm  
typical  
DETAIL A  
56 mm  
56 mm  
6 mm  
32 mm  
CLEAT  
Detail A  
610 mm  
DEPTH TO CLEAT  
56  
mm  
665 mm  
FLUSH INSET DEPTH  
76 mm  
typical  
CLEAT  
SHADED  
AREA  
MUST BE  
FINISHED  
102  
mm  
2127  
mm  
HEIGHT  
A
610 mm  
OPENING  
DEPTH TO  
CLEAT  
TO CLEAT  
32  
WIDTH TO CLEAT  
32  
mm  
mm  
2134  
B
56 mm  
mm  
FLUSH INSET WIDTH  
FLUSH  
INSET  
HEIGHT  
32 mm  
Detail B  
DETAIL B  
SIDE VIEW  
FRONT VIEW  
IMPORTANT NOTE: Dimensions assume a 19 mm panel  
thickness.  
Flush Inset Opening Widths  
ICBBI-30U  
A
B
746 mm  
902 mm  
902 mm  
1054 mm  
1206 mm  
813 mm  
IMPORTANT NOTE: If two units are installed side by side,  
refer to pages 23–27 for dual flush inset installations.  
ICBBI-36U  
965 mm  
965 mm  
ICBBI-36S  
ICBBI-42S  
1118 mm  
1270 mm  
ICBBI-48S and ICBBI-48SD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
Flush Inset Panels  
15  
subzero.com/specs  
The flush inset application allows decorative panels on the  
front of the unit to be flush with surrounding cabinetry and  
is available for all built-in overlay models. For exact panel  
dimensions, refer to flush inset panel specifications on the  
following pages.  
The illustration below provides a rear view of the three-  
panel assembly with critical dimensions, standard for all  
built-in models.  
IMPORTANT NOTE: The inside edges of the rough opening  
as well as the sides and a portion of the back side of the  
decorative panels will need to be finished, as they will be  
exposed when the doors are open.  
The flush inset design allows decorative panels to cover  
the door trim for a seamless appearance that blends with  
the design of the room. The most common way to achieve  
this look is to work with three panels—the decorative flush  
inset panel, which is typically 19 mm, a 3 mm spacer  
panel and a 6 mm backer panel. Depending on your  
cabinet manufacturer, this could also be one panel routed  
for different dimensions.  
IMPORTANT NOTE: For flush inset panels thicker than  
19 mm, a 90° door stop may be required to prevent inter-  
ference with adjacent cabinets. Refer to the full-scale tem-  
plates at the end of this section.  
IMPORTANT NOTE: When installing two units side by side  
in a flush inset application, refer to pages 23–27 for dual  
flush inset installations. Be aware that rough opening  
dimensions, panel sizes and offsets are different for this  
application.  
Regardless of the physical construction of the panels  
(three-panel assembly or routed panel), you will need to  
follow the flush inset panel specifications on the following  
pages for exact sizing and panel placement to ensure a  
proper fit.  
FLUSH INSET  
PANEL  
SPACER  
PANEL  
Do not exceed flush inset panel dimensions, as this  
could cause damage to panels and the Sub-Zero unit.  
BACKER  
PANEL  
Flush Inset Panel Requirements  
MAX WEIGHT PER PANEL  
All Flush Inset Models  
Grille Panel  
23 kg  
6 kg  
19  
6
mm  
3
mm  
typical  
mm  
MIN PANEL THICKNESS  
All Flush Inset Panels  
16 mm  
Three-panel assembly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
16  
Flush Inset Panels  
PANEL OFFSETS  
TOP VIEW  
TOP VIEW  
DOOR / DRAWER / GRILLE  
Illustrations A–F provide panel offsets and reveals for all  
built-in models in a flush inset application. Refer to the  
chart below for reference to the illustrations relating to  
your specific model.  
DOOR  
DOOR  
BACKER  
SPACER  
CABINETRY  
For additional information on model-specific panel reveals,  
visit the specification library section of our website,  
subzerotrade.com.  
FLUSH INSET PANEL  
8 mm  
8 mm  
3 mm  
13  
mm  
16  
6 mm  
mm  
REVEAL  
Panel Offsets  
Illus.  
Illus. A  
Illus. B  
OVER-AND-UNDER  
Door / Drawer / Grille Sides  
Grille Top  
A
C
D
E
F
CABINETRY  
Grille Bottom / Door Top  
Door Bottom / Drawer Top  
Drawer Bottom  
8
13 mm  
mm  
GRILLE  
4
mm  
3
SIDE-BY-SIDE  
mm  
GRILLE  
8
13 mm  
Doors (hinge) / Grille Sides  
Doors (handle) Sides  
Grille Top  
A
B
C
D
F
mm  
DOOR  
2
mm  
8
Grille Bottom / Door Top  
Door Bottom  
mm  
SIDE VIEW  
SIDE VIEW  
Illus. C  
Illus. D  
DOOR /  
DRAWER  
8
mm  
2
mm  
DOOR  
16 mm  
8
mm  
DRAWER  
4
mm  
8
mm  
2
SIDE VIEW  
SIDE VIEW  
mm  
Illus. E  
Illus. F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
17  
subzero.com/specs  
Flush Inset Panels  
H
H
H
W
ICBBI-30U / ICBBI-36U  
Model ICBBI-30U  
Model ICBBI-36U  
REFRIGERATOR  
Flush Inset Panel  
Spacer Panel  
W
787 mm  
740 mm  
756 mm  
H
1273 mm  
1253 mm  
1268 mm  
REFRIGERATOR  
Flush Inset Panel  
Spacer Panel  
W
940 mm  
892 mm  
908 mm  
H
1273 mm  
1253 mm  
1268 mm  
Backer Panel  
Backer Panel  
FREEZER  
W
787 mm  
740 mm  
756 mm  
H
483 mm  
459 mm  
475 mm  
FREEZER  
W
940 mm  
892 mm  
908 mm  
H
483 mm  
459 mm  
475 mm  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
GRILLE  
W
787 mm  
740 mm  
756 mm  
H
235 mm  
211 mm  
227 mm  
GRILLE  
W
940 mm  
892 mm  
908 mm  
H
235 mm  
211 mm  
227 mm  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
Grille panel dimensions listed are for a standard 2134 mm  
finished height. For a 2108 mm finished height, subtract 25  
mm from grille panel height dimensions. For a 2235 mm  
finished height, add 102 mm to height dimensions. A 2108  
mm or 2235 mm panel grille must be ordered to accept a  
2108 mm or 2235 mm custom panel. Width dimensions do  
not vary.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
18  
Flush Inset Panels  
H
H
H
H
A
B
W
W
W
W
ICBBI-36S / ICBBI-42S / ICBBI-48S  
ICBBI-48SD  
Model ICBBI-36S  
Models ICBBI-48S and ICBBI-48SD  
REFRIGERATOR  
Flush Inset Panel  
Spacer Panel  
W
522 mm  
487 mm  
503 mm  
H
REFRIGERATOR  
Flush Inset Panel  
Spacer Panel  
W
743 mm  
708 mm  
724 mm  
H
1772 mm  
1751 mm  
1767 mm  
1772 mm  
1751 mm  
1767 mm  
Backer Panel  
Backer Panel  
FREEZER  
W
411 mm  
376 mm  
392 mm  
H
1772 mm  
1751 mm  
1767 mm  
FREEZER  
W
495 mm  
460 mm  
476 mm  
H
1772 mm  
1751 mm  
1767 mm  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
GRILLE  
W
940 mm  
892 mm  
908 mm  
H
235 mm  
211 mm  
227 mm  
GRILLE  
W
H
235 mm  
211 mm  
227 mm  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
1245 mm  
1197 mm  
1213 mm  
DISPENSER (ICBBI-48SD)  
W
149 mm  
A
H
316 mm  
B
Cut-Out  
Model ICBBI-42S  
Cut-Out Location  
51 mm  
732 mm  
REFRIGERATOR  
Flush Inset Panel  
Spacer Panel  
W
649 mm  
614 mm  
630 mm  
H
1772 mm  
1751 mm  
1767 mm  
Grille panel dimensions listed are for a standard 2134 mm  
finished height. For a 2108 mm finished height, subtract 25  
mm from grille panel height dimensions. For a 2235 mm  
finished height, add 102 mm to height dimensions. A 2108  
mm or 2235 mm panel grille must be ordered to accept a  
2108 mm or 2235 mm custom panel. Width dimensions do  
not vary.  
Backer Panel  
FREEZER  
W
437 mm  
402 mm  
418 mm  
H
1772 mm  
1751 mm  
1767 mm  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
GRILLE  
W
1092 mm  
1045 mm  
1060 mm  
H
235 mm  
211 mm  
227 mm  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
19  
subzero.com/specs  
Dispenser  
MODEL ICBBI-48SD  
For overlay and flush inset models, mounting placement of  
the refrigerator door handle must assure proper access to  
the glasswell and adequate clearance under the handle.  
The handle placement illustration shows the relation of the  
refrigerator door handle to the glasswell bezel on stainless  
steel models.  
The refrigerator door panel must include a cut-out to  
accommodate the dispenser glasswell and bezel. The  
thickness of the panel in this area can range from 6 mm to  
a maximum of 29 mm.  
IMPORTANT NOTE: Regardless of the thickness of the  
panel for model ICBBI-48SD, you must plan for a flat  
landing area for the decorative bezel surrounding the  
glasswell area. The illustration to the right provides exact  
bezel dimensions. Refer to the appropriate panel specifi-  
cations page for exact cut-out location. This landing area  
can be accomplished in a number of different ways.  
16 mm  
2 mm  
One option (flush) is to rout the panel so the bezel will be  
flush with rails and stiles. You must rout a space to  
accommodate the height and width of the bezel. The  
width of the stile immediately to the left of the bezel must  
be 44 mm. Do not cut the entire stile to this dimension.  
160 mm  
25  
mm  
3 mm  
RADIUS  
GLASSWELL  
HANDLE  
51 mm  
The other option (proud) shows a boxed out landing area  
for the bezel using stiles and rails to create this space. In  
this application, the bezel will sit proud of the stiles and  
rails. The total thickness of the panels at this level must  
not exceed 29 mm.  
327  
mm  
Handle placement.  
Dispenser dimensions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
20  
Side Panels  
Side panels can be used with every design application.  
When planning for side panels with the installation of a  
built-in model, you need to be aware of the space configu-  
ration to achieve a pleasing fit. Depending on the exact  
panel you are using with your unit, the height of the panel  
may vary.  
IMPORTANT NOTE: If you have a model ICBBI-30U or  
ICBBI-36U, extra routing will be necessary to prevent the  
panel from hitting the refrigerator lower hinge plate.  
When installing a built-in unit with a custom side panel, an  
accessory kit (7003407) is required. Stainless steel and  
white enamel side panels are also available through your  
authorized Sub-Zero dealer.  
IMPORTANT NOTE: The use of side panels may change  
the width of your rough opening.  
The side panel will need to be a minimum of 610 mm deep  
and 13 mm thick. Refer to the illustrations below for side  
panel dimensions. Routing will be necessary so that the  
side panel fits flush against the side of the unit.  
610 mm  
FRONT  
OF SIDE  
PANEL  
25 mm  
48 mm  
3 mm  
ROUT TO 3 mm  
13 mm  
48 mm  
25 mm  
MAIN  
FRAME  
SIDE PANEL  
ROUTING  
2134  
mm  
Routing detail.  
108 mm  
ROUT TO  
5 mm  
(OVER-AND-UNDER  
MODELS)  
146  
mm  
521  
mm  
102 mm  
OPTIONAL  
TOE KICK  
CUT-OUT  
67 mm  
Side panel dimensions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
21  
subzero.com/specs  
Dual Installation  
STANDARD APPLICATION  
Dual Installation Panel Requirements  
MAX WEIGHT PER PANEL  
All Models  
Dual Wide Grille Panel  
Two overlay or stainless steel units may be placed side by  
side in a dual installation. Some standard applications will  
require a dual installation kit, available through your  
authorized Sub-Zero dealer. If you are installing two units  
side by side in a flush inset application, refer to page 23.  
23 kg  
12 kg  
MIN PANEL THICKNESS  
Overlay and Flush Inset Panels  
16 mm  
A custom filler strip can be used between two units in an  
overlay or stainless steel design application. It is recom-  
mended that the filler strip be at least 51 mm wide to  
prevent condensation between the units. Be sure to add  
the filler strip width to your rough opening width. Refer to  
the full-scale template on page 32.  
Dual installations without a filler strip can only be accom-  
plished using two units with opposite hinges as shown in  
illustration A below. The dual installations shown in illus-  
trations B and C require a filler strip.  
IMPORTANT NOTE: For the application shown in illustra-  
tion A, a dual installation accessory kit is required. Refer to  
page 27 for information on dual installation kits.  
FILLER STRIP REQUIRED  
WITHOUT FILLER STRIP  
FILLER STRIP REQUIRED  
Illus. A  
Illus. B  
Illus. C  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
22  
Dual Installation  
STANDARD INSTALLATION  
TOP VIEW  
610 mm  
OPENING  
DEPTH  
TWO UNITS WITH  
19 mm PANEL  
610 mm  
OPENING DEPTH  
2127 mm  
OPENING  
HEIGHT  
A
OPENING WIDTH  
SIDE VIEW  
FRONT VIEW  
IMPORTANT NOTE: A dual installation kit will be required  
Opening Widths  
A
for this installation.  
Two 762 mm Models  
1518 mm  
Stainless steel models are ready to install out of the box.  
762 mm and 914 mm Models  
Two 914 mm Models  
1670 mm  
1822 mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
23  
subzero.com/specs  
Dual Installation  
FLUSH INSET APPLICATION  
Dual Installation Panel Requirements  
MAX WEIGHT PER PANEL  
All Models  
Dual Wide Grille Panel  
Installing two built-in models side by side in a flush inset  
application will require adjustments to the dimensions of  
your finished rough opening, panel sizes and panel offsets.  
It will also require a dual installation kit, available through  
your authorized Sub-Zero dealer.  
23 kg  
12 kg  
MIN PANEL THICKNESS  
Flush Inset Panels  
16 mm  
Dual installations without a filler strip can only be accom-  
plished using two units with opposite hinges as shown in  
illustration A below. The dual installations shown in illus-  
trations B and C require a filler strip. Refer to the full-scale  
template on page 33. Illustration A is the only application  
that will accommodate the dual wide grille.  
IMPORTANT NOTE: The application shown in illustration A  
can only be achieved by installing dual flush inset panels.  
Failure to install dual flush inset panels will cause the  
handle side of the panels to collide when closing. In this  
application a dual installation accessory kit is also  
required.  
Dual flush inset panels and dual installation kits are avail-  
able through your authorized Sub-Zero dealer. Refer to  
pages 25–26 for dual flush inset panel specifications and  
page 27 for information on dual installation kits.  
FILLER STRIP REQUIRED  
FILLER STRIP REQUIRED  
WITHOUT FILLER STRIP  
Illus. A  
Illus. B  
Illus. C  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
24  
Dual Installation  
FLUSH INSET INSTALLATION  
TOP VIEW  
665 610 mm  
mm  
DEPTH  
TO CLEAT  
665 610 mm  
TOP VIEW  
CLEAT  
FLUSH  
INSET  
DEPTH  
mm  
OPENING  
DEPTH  
FLUSH  
INSET  
DEPTH  
32 mm  
TWO UNITS WITH  
19 mm PANEL  
CLEAT  
TO CLEAT  
76 mm  
typical  
DETAIL A  
56 mm  
56 mm  
6 mm  
CLEAT  
32 mm  
610 mm  
DEPTH TO CLEAT  
Detail A  
56  
mm  
665 mm  
FLUSH INSET DEPTH  
76 mm  
typical  
CLEAT  
SHADED  
AREA  
MUST BE  
FINISHED  
2127  
mm  
102  
mm  
HEIGHT  
A
TO CLEAT  
32  
WIDTH TO CLEAT  
32  
mm  
mm  
610 mm  
OPENING  
DEPTH TO  
CLEAT  
2134  
B
mm  
FLUSH INSET WIDTH  
FLUSH  
INSET  
HEIGHT  
56 mm  
32 mm  
Detail B  
DETAIL B  
SIDE VIEW  
FRONT VIEW  
IMPORTANT NOTE: Dimensions assume a 19 mm panel  
thickness. A dual installation kit will be required for this  
installation.  
Opening Widths  
Two 762 mm Models  
A
B
1581 mm  
1734 mm  
1886 mm  
1518 mm  
1670 mm  
1822 mm  
762 mm and 914 mm Models  
Two 914 mm Models  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
25  
subzero.com/specs  
Dual Installation  
FLUSH INSET PANEL OFFSETS  
TOP VIEW  
TOP VIEW  
DOOR / DRAWER / GRILLE  
When installing two built-in models side by side in a flush  
inset application, you must decrease the width of the dec-  
orative flush inset panels by 13 mm. Adjustments to the  
panel offsets will also need to be made. These adjust-  
ments are needed to achieve a proper fit and to ensure the  
panels do not collide when closing. Panel dimensions in  
the chart below have been adjusted to reflect the  
decrease in panel dimensions.  
DUAL  
TRIM  
DOOR  
DOOR  
BACKER  
SPACER  
CABINETRY  
FLUSH INSET PANEL  
8 mm  
8 mm  
3 mm  
13  
mm  
16  
6 mm  
mm  
REVEAL  
IMPORTANT NOTE: If a filler strip is not used, dual instal-  
lations can only be accomplished using two units with  
opposite hinges.  
Illus. A  
Illus. B  
Illustrations A–F provide panel offsets and reveals for all  
built-in models in a flush inset application. Refer to the  
chart below for reference to the illustrations relating to  
your specific model. All reveals are 13 mm unless other-  
wise specified.  
CABINETRY  
8
13 mm  
mm  
GRILLE  
4
mm  
3
mm  
GRILLE  
8
13 mm  
mm  
For additional information on model-specific panel reveals,  
visit the specification library section of our website,  
subzerotrade.com.  
DOOR  
2
mm  
8
mm  
SIDE VIEW  
SIDE VIEW  
Panel Offsets  
Illus.  
Illus. C  
Illus. D  
OVER-AND-UNDER  
Doors (hinge) / Drawer / Grille Sides  
Doors (handle) Sides  
Grille Top  
A
B
C
D
E
F
DOOR /  
DRAWER  
8
Grille Bottom / Door Top  
Door Bottom / Drawer Top  
Drawer Bottom  
mm  
2
mm  
DOOR  
16 mm  
8
mm  
DRAWER  
4
mm  
8
Do not exceed flush inset panel dimensions, as this  
mm  
2
could cause damage to panels and the Sub-Zero unit.  
SIDE VIEW  
SIDE VIEW  
mm  
Illus. E  
Illus. F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
26  
Dual Installation—Flush Inset Panels  
H
H
H
W
ICBBI-30U / ICBBI-36U  
ICBBI-30U  
ICBBI-36U  
REFRIGERATOR  
Flush Inset Panel  
Spacer Panel  
W
775 mm  
740 mm  
756 mm  
H
1273 mm  
1253 mm  
1268 mm  
REFRIGERATOR  
Flush Inset Panel  
Spacer Panel  
W
927 mm  
892 mm  
908 mm  
H
1273 mm  
1253 mm  
1268 mm  
Backer Panel  
Backer Panel  
FREEZER  
W
775 mm  
740 mm  
756 mm  
H
483 mm  
459 mm  
475 mm  
FREEZER  
W
927 mm  
892 mm  
908 mm  
H
483 mm  
459 mm  
475 mm  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
GRILLE  
W
775 mm  
740 mm  
756 mm  
H
235 mm  
211 mm  
227 mm  
GRILLE  
W
927 mm  
892 mm  
908 mm  
H
235 mm  
211 mm  
227 mm  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
Grille panel dimensions listed are for a standard 2134 mm  
finished height. For a 2108 mm finished height, subtract 25  
mm from grille panel height dimensions. For a 2235 mm  
finished height, add 102 mm to height dimensions. Width  
dimensions do not vary.  
For dual wide grilles, refer to page 27.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
27  
subzero.com/specs  
Dual Installation Kit  
INSTALLATION WITH DUAL WIDE GRILLE  
INSTALLATION WITH INDIVIDUAL GRILLES  
This kit will replace the existing grilles that ship with the  
units and span the entire width of both units. The kit  
includes a 6 mm center trim strip (required for proper  
installation of the dual wide grille), heater, dual kickplate  
and mounting hardware. Dual wide grilles are available for  
all built-in models and design applications. The overlay  
dual installation kit with grille will accept overlay and dual  
flush inset panels. For dual wide grille panel dimensions,  
refer to the panel specifications below for your design  
application. Grille panel dimensions listed are for a  
standard 2134 mm finished height.  
This kit is available for those who choose to utilize the  
individual grilles that ship with each unit. The kit includes a  
6 mm filler strip (which fills the reveal between the units  
and grilles), heater and mounting hardware. This dual  
installation kit is not required if a custom filler strip is used.  
The filler strip should be a minimum of 51 mm wide. Refer  
to the full-scale template on page 32 for more information.  
Dual Wide Grille—Overlay  
TWO 762 mm MODELS  
Overlay Panel  
Spacer Panel  
W
1530 mm  
1508 mm  
1524 mm  
H
235 mm  
211 mm  
227 mm  
Backer Panel  
762 mm AND 914 mm MODELS  
Overlay Panel  
Spacer Panel  
W
1683 mm  
1661 mm  
1676 mm  
H
235 mm  
211 mm  
227 mm  
Backer Panel  
TWO 914 mm MODELS  
Overlay Panel  
Spacer Panel  
W
1835 mm  
1813 mm  
1829 mm  
H
235 mm  
211 mm  
227 mm  
Backer Panel  
Dual Wide Grille—Flush Inset  
TWO 762 mm MODELS  
Flush Inset Panel  
Spacer Panel  
W
1556 mm  
1508 mm  
1524 mm  
H
235 mm  
211 mm  
227 mm  
Backer Panel  
762 mm AND 914 mm MODELS  
Flush Inset Panel  
Spacer Panel  
W
1708 mm  
1661 mm  
1676 mm  
H
235 mm  
211 mm  
227 mm  
Backer Panel  
TWO 914 mm MODELS  
Flush Inset Panel  
Spacer Panel  
W
1861 mm  
1813 mm  
1829 mm  
H
235 mm  
211 mm  
227 mm  
Backer Panel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
Accessories  
28  
These optional accessories are available through your  
authorized Sub-Zero dealer. For local dealer information,  
visit the find a showroom section of our website,  
subzero.com.  
STANDARD HANDLES  
Refer to the chart below for standard handle lengths  
and the stud spacing of tubular and pro handles used on  
built-in models.  
•
Flush inset front panels in stainless steel with handle  
options.  
Standard Handles  
Length Stud Spacing  
FULL-HEIGHT DOOR  
Tubular Handle  
Pro Handle  
•
•
•
Side panels in stainless steel and white enamel.  
Grilles for a 2108 mm or 2235 mm finished height.  
1622 mm  
1146 mm  
1114 mm  
1114 mm  
ICBBI-30U AND ICBBI-36U DOOR  
Tubular Handle  
Pro Handle  
1124 mm  
952 mm  
921 mm  
921 mm  
Tubular and pro handles to match the style of Wolf  
ovens and ranges.  
ICBBI-30U DRAWER  
Tubular Handle  
Pro Handle  
•
•
Dual installation kits with and without dual wide grille.  
Retrofit kits for use with 600 series panels.  
633 mm  
447 mm  
414 mm  
414 mm  
ICBBI-36U DRAWER  
Tubular Handle  
Pro Handle  
770 mm  
597 mm  
567 mm  
567 mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
29  
subzero.com/specs  
Overlay Panel Thickness  
FULL-SCALE TEMPLATE  
Overlay and flush inset panels must be a minimum of 16  
mm thick to support mounting the handle. Panel thickness  
does not include backer and spacer panel. Mount handle  
close to the opening edge of the door.  
DEPTH OF TUBULAR  
AND PRO HANDLES  
25  
51  
mm  
76  
mm  
mm  
32 mm PANEL  
25 mm PANEL  
19 mm PANEL  
3 mm SPACER PANEL  
6 mm BACKER PANEL  
DOOR  
PANEL THICKNESS  
OVERLAY AND FLUSH INSET APPLICATIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
30  
Overlay Application  
FULL-SCALE TEMPLATE  
606 mm  
OVERALL WIDTH OF UNIT  
TO REAR OF UNIT  
0 mm  
6 mm  
13 mm  
19 mm  
25 mm  
32 mm  
38 mm  
44 mm  
51 mm  
57 mm  
63 mm  
70 mm  
76 mm  
83 mm  
89 mm  
25 mm THICK  
PANEL  
19 mm THICK  
OVERLAY PANEL  
(TYPICAL)  
6 mm BACKER  
PANEL  
0 mm  
25 mm  
DOOR OPENING 90°  
TOP VIEW  
SCALE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
31  
subzero.com/specs  
Flush Inset Application  
610 mm  
TO BACK WALL  
FULL-SCALE TEMPLATE  
For panels thicker than 19 mm,  
a 90° door stop may be required  
to prevent interference with  
adjacent cabinets.  
32 mm  
56 mm  
ASSUMES  
19 mm  
FLUSH INSET  
PANEL  
THICKNESS  
25 mm THICK  
PANEL  
19 mm THICK  
FLUSH INSET PANEL  
(TYPICAL)  
6 mm BACKER  
PANEL  
0 mm  
25 mm  
DOOR OPENING 110°  
TOP VIEW  
SCALE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
32  
FILLER STRIP  
32 mm  
APPROX PROFILE OF  
STAINLESS STEEL WRAPPED  
DOOR AND HANDLE  
DOOR  
CLOSED  
DOOR  
OPEN 110°  
Dual Installation—Standard  
FULL-SCALE TEMPLATE  
Typical overlay or stainless steel dual  
installation with filler strip at maximum  
110° door opening. Depending on panel  
thickness, a 90° door stop may be  
required.  
0 mm  
25 mm  
STANDARD  
TOP VIEW  
SCALE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Refrigeration  
33  
subzero.com/specs  
FILLER STRIP  
38 mm  
13 mm  
PROFILE OF 19 mm FLUSH INSET PANEL  
DOOR  
CLOSED  
AND TUBULAR HANDLE  
DOOR  
OPEN 110°  
Dual Installation—Flush Inset  
FULL-SCALE TEMPLATE  
Typical flush inset dual installation with  
filler strip at maximum 110° door  
opening. Depending on panel thickness,  
a 90° door stop may be required.  
0 mm  
25 mm  
FLUSH INSET  
TOP VIEW  
SCALE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRO 48 Refrigeration  
34  
PRO 48 Refrigeration. Freshness finds unmistakable expression in the Sub-Zero PRO 48. A 363 kg monument to  
food preservation—equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like its bold  
exterior, is crafted of stainless steel. The PRO 48 is available with or without a glass door and may be either built in or  
freestanding.  
PRO 48 MODELS  
KEY FEATURES  
•
Can be used freestanding or installed as a standard or  
flush built-in application.  
1219 mm  
1219 mm  
•
•
•
Handles coordinate with handles of Wolf ranges.  
Stainless steel interior as well as exterior.  
Dual refrigeration system enhanced with triple evapora-  
tors allow independent control of storage conditions in  
refrigerator cabinet and drawer compartments.  
2134  
mm  
2134  
mm  
•
•
Exterior temperature display.  
Flip-up grille provides easy access for quick routine  
maintenance.  
ICB648PRO  
ICB648PROG  
•
Star-K certified.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRO 48 Refrigeration  
35  
subzero.com/specs  
PRO 48 Models  
OVERALL DIMENSIONS  
1219 mm  
657 mm  
2134  
mm  
1070  
mm  
775  
mm  
102 mm  
HEIGHT DIMENSIONS 13 mm  
767 mm  
606  
mm  
368  
mm  
533 mm  
SPECIFICATIONS  
781  
mm  
Capacity / Weight  
INTERIOR CAPACITY  
R (L)  
F (L)  
ICB648PRO and ICB648PROG  
520  
332  
SHIPPING WEIGHT  
ICB648PRO  
ICB648PROG  
KG  
390  
397  
60 mm  
MODELS ICB648PRO AND ICB648PROG  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRO 48 Refrigeration  
36  
PRO 48 Models  
STANDARD AND FLUSH BUILT-IN INSTALLATIONS  
TOP VIEW  
OPENING  
DEPTH  
OPENING  
DEPTH  
OPENING  
HEIGHT  
OPENING  
WIDTH  
SIDE VIEW  
FRONT VIEW  
IMPORTANT NOTE: For standard built-in installations, the  
face frame of the unit will extend 51 mm beyond cabinetry.  
In flush built-in installations, the front of the face frame will be  
flush with surrounding cabinetry.  
Opening Dimensions  
Opening Width  
Standard  
1206 mm  
2127 mm  
610 mm  
Flush  
1219 mm  
2137 mm  
660 mm  
Opening Height  
Opening Depth  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRO 48 Refrigeration  
Planning Information  
37  
subzero.com/specs  
PRO 48 models can be used freestanding or installed as a  
standard or flush built-in application. For standard built-in  
installations, the face frame of the unit will extend 51 mm  
beyond cabinetry. In flush built-in installations, the front of  
the face frame will be flush with surrounding cabinetry.  
PLUMBING REQUIREMENTS  
PRO 48 models come with an automatic ice maker. The  
water supply line should be located within the shaded area  
shown in the illustration below. The water supply line  
should be connected to the house supply with an easily  
accessible shut-off valve between the supply and the unit.  
Do not use self-piercing valves. A saddle valve kit  
(4200880) is available through your authorized Sub-Zero  
dealer. The water line must not interfere with installation of  
the anti-tip brackets.  
ELECTRICAL REQUIREMENTS  
International models from the factory designed without a  
transformer require a 220-240 V AC, 50/60 Hz electrical  
supply, fused at the correct rating for the unit. If required  
by local or national codes, the power cord can be easily  
replaced using the power inlet device.  
IMPORTANT NOTE: A reverse osmosis system can be  
used provided there is constant water pressure of 2.4 bar  
to 8.3 bar supplied to the unit at all times.  
For PRO 48 models, the electrical supply should be  
located within the shaded area shown in the illustration  
below. Follow local codes and ordinances when installing  
the receptacle. A separate circuit, servicing only this appli-  
ance, is required. A ground fault circuit interrupter (GFCI)  
is not recommended and may cause interruption of opera-  
tion.  
Plumbing Requirements  
Water Supply Line  
6.35 mm OD copper line  
2.4–8.3 bar  
Water Pressure  
Excess Water Line for Connection  
914 mm  
Electrical Requirements  
Power Supply  
Circuit Breaker  
Receptacle  
220-240 V AC, 50/60 Hz  
10 amp  
3-prong grounding-type  
152  
mm  
132  
76 mm  
mm  
FRONT VIEW  
FLOOR  
FRONT VIEW  
178  
mm  
E
152  
mm  
Location of water supply.  
1918 mm  
FROM  
FLOOR  
Location of electrical supply.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRO 48 Refrigeration  
38  
Accessories  
These optional accessories are available through your  
authorized Sub-Zero dealer. For local dealer information,  
visit the find a showroom section of our website,  
subzero.com.  
•
Freestanding kit, which contains two stainless steel  
side panels and top lid.  
•
•
Stainless steel side panel.  
Refrigerator drawer dividers for compartmentalized  
storage.  
•
•
•
Stainless steel slide-out refrigerator bin.  
Dozen egg container.  
90° door stop.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Refrigeration  
39  
subzero.com/specs  
Integrated Refrigeration. With custom cabinet fronts and hardware, Sub-Zero invented integrated drawers and tall  
units that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration as practical  
and beautiful in the master suite, bar or theatre room as in the kitchen.  
INTEGRATED MODELS  
KEY FEATURES  
•
•
•
Custom cabinet fronts and hardware allow for  
infinite design options.  
686 mm  
686 mm  
Point-of-use refrigeration that can be placed  
anywhere in the home.  
2032  
mm  
2032  
Dual refrigeration; two compressors preserve  
mm  
food’s goodness in self-contained compartments.  
•
•
Energy efficient.  
Drawer model is Star-K certified.  
ICB700TR  
ICB700TCI  
914 mm  
914 mm  
2032  
mm  
2032  
mm  
686 mm  
876  
mm  
ICB700BR  
ICB736TR  
ICB736TCI  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Refrigeration  
40  
Overall Dimensions  
686 mm TALL MODELS  
914 mm TALL MODELS  
686 mm  
356 mm  
610 mm  
914 mm  
610 mm  
356 mm  
21  
mm  
33  
mm  
1995  
mm  
1976  
mm  
2032  
mm  
TO TOP OF  
OPENNG  
2032  
mm  
TO TOP OF  
OPENNG  
10  
10  
mm  
mm  
13  
13  
337 mm  
260 mm  
337 mm  
260 mm  
mm  
mm  
876  
mm  
876  
mm  
518  
mm  
518  
mm  
248  
mm  
248  
mm  
102  
mm  
102  
mm  
HEIGHT DIMENSIONS 13 mm  
HEIGHT DIMENSIONS 13 mm  
610  
mm  
610  
mm  
117  
mm  
178  
mm  
495  
mm  
648  
mm  
495  
mm  
876  
mm  
DIMENSIONS WILL VARY WITH PANEL THICKNESS  
DIMENSIONS WILL VARY WITH PANEL THICKNESS  
MODELS ICB700TR AND ICB700TCI  
MODELS ICB736TR AND ICB736TCI  
Overall dimensions do not include panels or handles.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Refrigeration  
41  
subzero.com/specs  
Overall Dimensions  
Capacity and Weight  
DRAWER MODELS  
Interior Capacity  
R (L)  
F (L)  
143  
686 mm TALL MODELS  
ICB700TR  
ICB700TCI  
686 mm  
610 mm  
10  
439  
288  
mm  
914 mm TALL MODELS  
ICB736TR  
ICB736TCI  
590  
378  
13  
337 mm  
mm  
200  
876  
mm  
686 mm DRAWER MODEL  
ICB700BR  
149  
260 mm  
518  
mm  
Shipping Weight  
kg  
163  
218  
86  
248 mm  
ICB700TR and ICB700TCI  
ICB736TR and ICB736TCI  
ICB700BR  
102  
mm  
HEIGHT DIMENSIONS 13 mm  
610  
mm  
495  
mm  
657 mm  
DIMENSIONS WILL VARY WITH PANEL THICKNESS  
MODEL ICB700BR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Refrigeration  
42  
Opening Dimensions  
INTEGRATED MODELS  
IMPORTANT NOTE: The depth of each integrated model is  
610 mm from the front of the unit to its back. Your design may  
necessitate moving the unit back or cabinets forward to  
achieve a flush fit. This will require a minimum rough opening  
depth of 635 mm.  
TOP VIEW  
635 mm  
OPENING  
DEPTH  
635 mm  
OPENING DEPTH  
B
A
OPENING  
HEIGHT  
OPENING WIDTH  
SIDE VIEW  
FRONT VIEW  
Opening Dimensions  
ICB700TR, ICB700TCI  
ICB736TR, ICB736TCI  
ICB700BR  
A
B
686 mm  
914 mm  
686 mm  
2032 mm  
2032 mm  
876 mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Refrigeration  
Electrical Requirements  
43  
subzero.com/specs  
International models from the factory designed without a  
transformer require a 220-240 V AC, 50/60 Hz electrical  
supply, fused at the correct rating for the unit. If required  
by local or national codes, the power cord can be easily  
replaced using the power inlet device.  
Electrical Requirements  
Power Supply  
220-240 V AC, 50/60 Hz  
10 amp  
Circuit Breaker  
Receptacle  
3-prong grounding-type  
The electrical supply should be located within the shaded  
area shown in the illustrations. Follow local codes and  
ordinances when installing the receptacle. A separate  
circuit, servicing only this appliance, is required. A ground  
fault circuit interrupter (GFCI) is not recommended and  
may cause interruption of operation.  
IMPORTANT NOTE: It is critical that the electrical outlet be  
located within the shaded area shown so it does not inter-  
fere with installation of the anti-tip bracket. It must be  
flush with the back wall and positioned with the grounding  
prong to the right of the thinner blades.  
POSITION OUTLET WITH  
GROUNDING PRONG  
TO THE RIGHT  
POSITION OUTLET WITH  
GROUNDING PRONG  
TO THE RIGHT  
64 mm  
64 mm  
445 mm  
330 mm  
114  
mm  
114  
mm  
E
E
FLOOR  
FLOOR  
6
6
mm  
mm  
FRONT VIEW  
FRONT VIEW  
686 mm models.  
914 mm models.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Refrigeration  
Plumbing Requirements  
44  
For integrated models with an automatic ice maker, the  
water supply line should be located through the floor or  
back wall, within the shaded area shown in the illustra-  
tions. The water supply line should be connected to the  
house supply with an easily accessible shut-off valve  
between the supply and the unit. Do not use self-piercing  
valves. A saddle valve kit (4200880) is available through  
your authorized Sub-Zero dealer.  
343  
mm  
BACK  
WALL  
152  
mm  
38  
mm  
64 mm  
64 mm  
343 mm  
76 mm  
FLOOR  
19  
IMPORTANT NOTE: It is critical that the water line be  
located within the shaded area shown so it does not inter-  
fere with installation of the anti-tip bracket.  
mm  
FRONT VIEW  
TOP VIEW  
914 mm models.  
An in-line filter is required when water conditions have a  
high sediment content. The ice maker operates on  
constant water pressure between 1.4 bar and 6.9 bar.  
Plumbing Requirements  
Water Supply Line  
6.35 mm OD copper line  
1.4–6.9 bar  
IMPORTANT NOTE: In some cases, a reverse osmosis  
water filter system may not be able to maintain the  
minimum pressure consistently.  
Water Pressure  
Excess Water Line for Connection  
686 mm  
229  
mm  
BACK  
WALL  
152  
mm  
38  
mm  
64 mm  
64 mm  
229  
mm  
76 mm  
FLOOR  
FRONT VIEW  
19  
mm  
TOP VIEW  
686 mm models.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Refrigeration  
45  
subzero.com/specs  
Cabinetry Applications  
FRAMELESS CABINETRY  
679 mm  
PANEL WIDTH  
908 mm  
PANEL WIDTH  
A
A
1153  
mm  
1153  
mm  
2029  
mm  
2029  
mm  
A
A
A
A
345  
mm  
345  
mm  
876  
mm  
424  
mm  
424  
mm  
102 mm  
4" (102)  
686 mm  
FINISHED OPENING  
914 mm  
FINISHED OPENING  
ALL REVEALS (A) ARE 3 mm.  
686 mm MODELS  
914 mm MODELS  
TALL AND DRAWER MODELS  
TALL MODELS  
Panel dimensions are based on a 3 mm reveal. A reveal of up  
to 6 mm is possible with adjustments to panel dimensions.  
Typical Panel Dimensions  
686 mm MODELS  
Door  
Top Drawer  
Bottom Drawer  
W
H
1153 mm  
345 mm  
424 mm  
679 mm  
679 mm  
679 mm  
914 mm MODELS  
Door  
Top Drawer  
Bottom Drawer  
W
908 mm  
908 mm  
908 mm  
H
1153 mm  
345 mm  
424 mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Refrigeration  
46  
Cabinetry Applications  
DOOR PANEL HEIGHT  
TOE KICK CLEARANCE  
The height of the door panel can extend beyond the  
typical panel height, provided you do not exceed the panel  
weight limit. The illustration below shows how the panel  
may be extended and what you need to consider to finish  
the area behind the door panel.  
The toe kick clearance can vary with the height of the  
panel. You must keep a minimum space of 102 mm clear  
below the bottom edge of the panel for proper venting. In  
addition, any decorative base molding must be removable  
to clean the condenser and for service.  
IMPORTANT NOTE: The decorative valance used to finish  
the area behind the door panel must stay behind the front  
plane of the finished molding.  
635 mm TO WALL  
INTEGRATED UNIT  
(SIDE VIEW)  
38  
mm  
DECORATIVE VALANCE  
CANNOT EXTEND BEYOND  
THE FRONT OF THE MOLDING  
3 mm  
3 mm  
HEIGHT  
OF PANEL  
KICKPLATE/GRILLE  
CAN BE ADJUSTED  
FORWARD  
OVERALL  
HEIGHT  
DOOR  
PANEL  
DECORATIVE VALANCE  
KICKPLATE/GRILLE  
REMOVABLE MOLDING  
BASE MOLDING  
MUST BE  
REMOVABLE  
HINGE  
MINIMUM  
HEIGHT  
102 mm TO 229 mm  
FROM FLOOR  
635 mm TO WALL  
TYPICAL  
HEIGHT  
OF DOOR  
PANEL  
INTEGRATED UNIT  
(SIDE VIEW)  
67 mm TO 102 mm  
UPPER VALANCE  
KICKPLATE/GRILLE AREA  
TALL MODELS  
ALL INTEGRATED MODELS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Refrigeration  
Cabinetry Applications  
47  
subzero.com/specs  
Integrated refrigeration is compatible with virtually any  
style and look of cabinetry. These models can be used  
with framed as well as frameless cabinetry. Because of the  
precise application and the look you may want to achieve,  
keep the following considerations in mind:  
IMPORTANT NOTE: The inside edges of the rough opening  
as well as the sides and a portion of the backside of the  
decorative panels will need to be finished, as they will be  
exposed when the doors are open.  
D-style handles are recommended. For the cabinet door,  
handles must be located near the edge of the panel  
opposite the hinge, centered top to bottom. Locate  
handles in the top center area of the drawer panels.  
The thickness of the front panels can vary. A minimum 16  
mm thick panel is required, but the thickness can be  
increased provided the panel weight limit is not exceeded.  
IMPORTANT NOTE: The depth of each integrated model is  
610 mm from the front of the unit to its back. You must  
allow for the thickness of the panel you are applying when  
planning for the finished rough opening depth if you want  
the front panel to be flush with surrounding cabinetry. You  
may have to move the unit back into drywall or bring the  
cabinets forward to achieve a flush fit.  
Illustrations on the following pages show typical applica-  
tions of frameless and framed cabinetry. Also refer to the  
full-scale illustration at the end of this section for specifics  
on door openings.  
Panel Requirements  
TALL AND DRAWER MODELS  
686 mm Door Panel  
MAX WEIGHT  
18 kg  
Reveals between panels can vary. A reveal of 3 mm is  
typical, but reveals can be increased to up to 6 mm.  
686 mm Drawer Panel  
914 mm Door Panel  
5 kg  
24 kg  
914 mm Drawer Panel  
7 kg  
PANEL THICKNESS  
MINIMUM  
As reveals between cabinetry and the unit decrease,  
the potential exists for severe finger pinching while the  
door is closing.  
All Panels  
16 mm  
When 19 mm or thicker panels are used with a reveal of  
less than 6 mm, door panels may cause damage to the  
unit when the door is opened to the maximum 105°.  
Use the built-in 90° door stop.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Refrigeration  
Cabinetry Applications  
48  
Dual Installations  
The illustrations below show typical applications of framed  
and frameless cabinetry. Refer to the full-scale templates  
at the end of this section for specifics on door openings.  
Two integrated units may be placed side by side in a dual  
installation. Depending on the models specified, opening  
widths will be 1372 mm, 1600 mm or 1829 mm. Panel  
width dimensions will vary slightly from single installations.  
Refer to the chart below for typical panel dimensions. The  
dimensions are based on a 3 mm reveal. A reveal of up to  
6 mm is possible with adjustments to panel dimensions.  
CABINET  
INTEGRATED  
UNIT  
CABINET  
INTEGRATED  
UNIT  
Typical Panel Dimensions  
686 mm MODELS  
Door  
Top Drawer  
Bottom Drawer  
W
681 mm  
681 mm  
681 mm  
H
1153 mm  
345 mm  
424 mm  
DOOR  
PANEL  
DOOR  
PANEL  
914 mm MODELS  
Door  
Top Drawer  
Bottom Drawer  
W
910 mm  
910 mm  
910 mm  
H
1153 mm  
345 mm  
424 mm  
3 mm  
REVEAL  
3 mm  
REVEAL  
FINISHED  
OPENING  
FINISHED  
OPENING  
Framed—full overlay.  
Framed—standard overlay.  
A dual installation kit is required for installations with 51  
mm or less space between the units. Dual installation kits  
are available through your authorized Sub-Zero dealer.  
CABINET  
INTEGRATED  
UNIT  
CABINET  
DOOR  
UNIT  
IMPORTANT NOTE: If a 686 mm unit is installed next to a  
914 mm tall unit, the decorative front panels will align,  
however, the face frames will not. This is only apparent  
when both doors are open at the same time. Due to a  
more robust hinge on 914 mm units, the face frame was  
reconfigured to maintain a consistent overall panel height.  
Refer to the illustration below.  
PANEL  
DOOR  
PANEL  
3 mm  
REVEAL  
3 mm  
REVEAL  
FINISHED  
OPENING  
FINISHED  
OPENING  
Framed—beaded inset.  
Frameless cabinetry.  
Face frame alignment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Refrigeration  
49  
subzero.com/specs  
Accessories  
These optional accessories are available through your  
authorized Sub-Zero dealer. For local dealer information,  
visit the find a showroom section of our website,  
subzero.com.  
STANDARD HANDLES  
Refer to the chart below for standard handle lengths  
and the stud spacing of tubular and pro handles used on  
integrated models.  
•
•
Stainless steel front panels with handles.  
Standard Handles  
Length Stud Spacing  
Tubular and pro handles to match the style of Wolf  
ovens and ranges.  
DOOR  
Tubular Handle  
Pro Handle  
1046 mm  
1006 mm  
845 mm  
973 mm  
•
Crisper drawer with shelf assembly, deli drawer with  
shelf and crisper cover with lid for certain models.  
686 mm MODEL DRAWERS  
Tubular Handle  
Pro Handle  
614 mm  
533 mm  
413 mm  
500 mm  
•
•
Dual installation kit.  
914 mm MODEL DRAWERS  
Tubular Handle  
Pro Handle  
Harness kit for Star-K compliance.  
843 mm  
762 mm  
641 mm  
730 mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Refrigeration  
50  
INTEGRATED  
DOOR  
MAXIMUM 105° OPENING  
Maximum Door Opening  
FULL-SCALE TEMPLATE  
If the panel is thicker than 19 mm, use the built-in 90°  
door stop to prevent damage to the panel and face frame  
at the maximum door opening.  
LINE OF  
INTERFERENCE  
105° OPENING  
TOP VIEW—1/4 SCALE  
LINE OF INTERFERENCE  
MAXIMUM 105° OPENING  
3 mm MINIMUM REVEAL  
FRAMED PANEL  
19 mm  
MOUNTING BRACKET  
INTEGRATED DOOR CLOSED  
LINE OF INTERFERENCE  
SIDE MOLDING AND  
INSTALLATION HARDWARE  
0 mm  
25 mm  
SCALE  
DOOR CLOSED  
TOP VIEW—FULL-SCALE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
51  
subzero.com/specs  
Wine Storage. Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to  
ensure better wine preservation. Cherrywood-faced shelves, soft lighting, custom cabinetry if desired—Sub-Zero helps  
make a wine collection an element of beauty in the home.  
WINE STORAGE MODELS  
762 mm  
686 mm  
686 mm  
2032  
mm  
2032  
mm  
2134  
mm  
616 mm  
606 mm  
868  
mm  
864  
mm  
ICB424G  
ICB424FSG  
ICB427G  
ICB427RG  
ICBWS-30  
KEY FEATURES  
•
Integrated, overlay, flush inset and stainless steel  
design options.  
•
Two independent storage zones maintain temperature,  
humidity and UV protection.  
•
•
Full-view glass door standard on all models.  
•
•
Cherrywood shelf fronts display the wine beautifully.  
Freestanding model ICB424FSG does not require  
panels or surrounding cabinetry.  
Rust-proof metal shelves accommodate 750 ml  
bottles, half-bottles and magnums.  
•
Discreet interior lighting with illuminated display shelf.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
52  
Overall Dimensions  
UNDERCOUNTER WINE STORAGE  
606 mm  
610 mm  
864  
mm  
102 mm  
645  
mm  
60 mm  
MODEL ICB424G  
Overall dimensions are based on stainless steel panels  
and handles.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
53  
subzero.com/specs  
Overall Dimensions  
FULL-SIZE WINE STORAGE  
686 mm  
356 mm  
610 mm  
686 mm  
356 mm  
610 mm  
21  
mm  
21  
mm  
1995  
mm  
1995  
mm  
2032  
mm  
OPENING  
HEIGHT  
2032  
mm  
OPENING  
HEIGHT  
10  
mm  
337  
mm  
13  
mm  
876  
mm  
260  
mm  
518  
mm  
248  
mm  
227  
mm  
102  
mm  
102  
mm  
HEIGHT DIMENSIONS 13 mm  
HEIGHT DIMENSIONS 13 mm  
610  
mm  
610  
mm  
117  
mm  
117  
mm  
648  
mm  
495  
mm  
648  
mm  
DIMENSIONS WILL VARY WITH PANEL THICKNESS  
DIMENSIONS WILL VARY WITH PANEL THICKNESS  
MODEL ICB427G  
MODEL ICB427RG  
WITH REFRIGERATOR DRAWERS  
Overall dimensions do not include panels or handles.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
54  
Overall Dimensions  
Capacity and Weight  
FULL-SIZE WINE STORAGE  
Storage Capacity  
ICB424G  
Bottles (750 ml)  
R (L)  
46  
132  
78  
762 mm  
610 mm  
ICB427G  
ICB427RG  
150  
ICBWS-30  
147  
Shipping Weight  
ICB424G  
kg  
88  
2134  
mm  
ICB424FSG  
ICB427G  
100  
179  
186  
202  
1873  
mm  
ICB427RG  
ICBWS-30  
HEIGHT DIMENSIONS 13 mm  
606 mm  
102 mm  
606  
mm  
432  
mm  
796  
mm  
60 mm  
MODEL ICBWS-30  
Overall dimensions are based on the stainless steel model.  
For flush inset applications, add 13 mm to door clearance  
dimensions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
55  
subzero.com/specs  
Opening Dimensions  
UNDERCOUNTER WINE STORAGE  
FULL-SIZE WINE STORAGE  
TOP VIEW  
TOP VIEW  
610 mm  
OPENING  
DEPTH  
635 mm  
OPENING  
DEPTH  
610 mm  
OPENING DEPTH  
876 mm  
OPENING  
HEIGHT  
610 mm  
OPENING WIDTH  
635 mm  
OPENING DEPTH  
2032 mm  
OPENING  
HEIGHT  
686 mm  
OPENING WIDTH  
SIDE VIEW  
FRONT VIEW  
MODEL ICB424G  
SIDE VIEW  
FRONT VIEW  
MODELS ICB427G AND ICB427RG  
IMPORTANT NOTE: The depth of each integrated model is  
610 mm from the front of the unit to its back. Your design may  
necessitate moving the unit back or cabinets forward to  
achieve a flush fit. This will require a minimum rough opening  
depth of 635 mm.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
56  
Opening Dimensions  
Planning Information  
FULL-SIZE WINE STORAGE  
All wine storage models must be installed so that the door  
can open a minimum of 90° or you will have problems  
pulling the wine shelves out. For corner installations, you  
need to allow for a minimum 76 mm filler so the door can  
open to 90°. If you are using larger-handle hardware, you  
will also need to take that into account. Refer to door  
clearance specifications.  
TOP VIEW  
610 mm  
OPENING  
DEPTH  
For a maximum 90° door opening, use the door stop built  
into the hinge system of model ICB427G. A 90° door stop  
is shipped with model ICBWS-30.  
If you will be connecting the unit to a home security  
system, you must allow a minimum of 914 mm of the  
system’s wiring to be routed in the electrical area desig-  
nated for your model.  
610 mm  
OPENING DEPTH  
2127 mm  
OPENING  
HEIGHT  
746 mm  
OPENING WIDTH  
SIDE VIEW  
FRONT VIEW  
MODEL ICBWS-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
57  
subzero.com/specs  
Planning Information  
DUAL INSTALLATIONS  
Electrical Requirements  
Power Supply  
220-240 V AC, 50/60 Hz  
10 amp  
If you are installing a wine storage unit next to an existing  
Sub-Zero unit, you may have to allow for a filler strip.  
Circuit Breaker  
Receptacle  
3-prong grounding-type  
If you are installing a model ICB427G or ICB427RG next to  
an existing integrated unit, with 51 mm or less between  
the units, an optional heater kit will need to be installed to  
prevent moisture from forming between the units. These  
optional heater kits are available through your authorized  
Sub-Zero dealer. For local dealer information, visit the find  
a showroom section of our website, subzero.com.  
FRONT VIEW  
178  
E
mm  
152  
mm  
ELECTRICAL REQUIREMENTS  
1918 mm  
FROM  
FLOOR  
International models from the factory designed without a  
transformer require a 220-240 V AC, 50/60 Hz electrical  
supply, fused at the correct rating for the unit. If required  
by local or national codes, the power cord can be easily  
replaced using the power inlet device.  
Model ICBWS-30.  
The electrical supply should be located within the shaded  
area shown in the illustration for your specific model.  
Follow local codes and ordinances when installing the  
receptacle. A separate circuit, servicing only this appli-  
ance, is required. A ground fault circuit interrupter (GFCI)  
is not recommended and may cause interruption of opera-  
tion.  
POSITION OUTLET WITH  
GROUNDING PRONG  
TO THE RIGHT  
64 mm  
51 mm  
330 mm  
394 mm  
114  
E
mm  
76 mm  
E
FLOOR  
6
mm  
FRONT VIEW  
FRONT VIEW  
Model ICB424G.  
Models ICB427G and  
ICB427RG.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
Door Panels  
58  
Overlay Panels  
Unless you are installing a stainless steel model, you will  
need to provide a frame for the glass door. If you order a  
stainless steel unit, models ICB424G, ICB424FSG and  
ICBWS-30 will be shipped with their panels and hardware  
installed. For models ICB427G and ICB427RG, optional  
stainless steel panels or custom panels will need to be  
installed.  
MODEL ICB424G  
The overlay panel applied to model ICB424G should not  
be confused with the built-in overlay panel application.  
The overlay panel will consist of just a frame and would be  
either the 16 mm or 19 mm thick panel you may be using.  
It is affixed directly to the door itself with screws through a  
series of predrilled holes in the door frame. A backer and  
spacer panel is not required.  
The glass door is designed to be exposed to room air cir-  
culation. Decorative overlays on the glass should be kept  
to a minimum. Also, rails and stiles can be increased in  
size but should not exceed the cabinet manufacturers’  
standard width and cannot exceed the overall door panel  
dimensions listed in the charts.  
Model ICB424G can be installed flush with surrounding  
cabinetry. Depending on the thickness of the overlay door  
panel, it may be necessary to install the unit so that it  
extends 6 mm beyond the front surface of surrounding  
cabinetry. This will prevent interference between the door  
panel and adjoining cabinetry at the maximum 145° door  
swing. Refer to the full-scale template at the end of this  
section.  
The back sides of rails and stiles that will be visible  
through the glass door will need to be finished. Also, the  
inside edges of the frames must be finished to match the  
front surface.  
Overlay Panels  
FREESTANDING MODEL ICB424FSG  
PANEL DIMENSIONS  
W
H
ICB424G  
603 mm  
764 mm  
Model ICB424FSG does not require any panels or sur-  
rounding cabinetry. It has a beautiful stainless steel  
exterior that is designed to be used in a freestanding  
application.  
MIN WIDTH  
Stiles and Rails  
57 mm  
5 kg  
MAX PANEL WEIGHT  
Door Frame  
MIN PANEL THICKNESS  
All Panels  
16 mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
59  
subzero.com/specs  
Integrated Panels  
MODELS ICB427G AND ICB427RG  
The height of the door panel for models ICB427G and  
ICB427RG can extend beyond the typical panel height,  
provided you do not exceed the panel weight limit. Refer  
to specifications on page 46 of the integrated section.  
The integrated full panels or frame panels for glass doors  
for these models will follow some of the identical planning  
processes used with the integrated line. The installation of  
the door panels is completely different, however. Rather  
than using the mounting hardware we used with the inte-  
grated line, door panels for both models ICB427G and  
ICB427RG will be applied with screws applied through our  
door.  
The toe kick area on model ICB427G cannot be larger  
than 152 mm, and on model ICB427RG, no larger than  
229 mm. The toe kick area for either model cannot be less  
than 102 mm.  
If you are installing an optional lock kit on models  
ICB427G or ICB427RG, you may have to order door  
panels that exceed the 2032 mm finished height. Consult  
the lock kit installation instructions and see if your panels  
will allow for an adequate installation. These instructions  
are available on our website, subzero.com.  
The drawer panels for the model ICB427RG will be applied  
using the integrated technique of mounting brackets.  
IMPORTANT NOTE: The depth of models ICB427G and  
ICB427RG is 610 mm from the front of the unit to its back.  
You must allow for the thickness of the panel you are  
applying when planning for the finished rough opening  
depth if you want the front panel to be flush with sur-  
rounding cabinetry. You may have to move the unit back  
into the drywall or bring the cabinets forward. Refer to the  
integrated section.  
Integrated Panels  
ICB427G  
W
H
Door  
679 mm  
1927 mm  
ICB427RG  
Door  
Top Drawer  
Bottom Drawer  
W
679 mm  
679 mm  
679 mm  
H
1153 mm  
345 mm  
424 mm  
Panel dimensions listed in the chart assume the models  
finish off at 2032 mm in height overall and have a 102 mm  
toe kick for the model ICB427G. If you finish off at 2134  
mm, for instance, you must add an additional 102 mm to  
the finished height of the panel and 102 mm to the top rail.  
Likewise, if you allow for a 152 mm toe kick for the model  
ICB427G, you must subtract 51 mm from the bottom rail.  
Panel Requirements  
MIN WIDTH  
Stiles  
Top Rail  
Bottom Rail (ICB427G)  
Bottom Rail (ICB427RG)  
57 mm  
95 mm  
203 mm  
76 mm  
MAX PANEL WEIGHT  
Door Frame  
Drawer Panel (ICB427RG)  
9 kg  
5 kg  
MIN PANEL THICKNESS  
All Panels  
16 mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
60  
Model ICBWS-30  
OVERLAY PANEL  
OVERLAY PANEL SPECIFICATIONS  
Overlay model ICBWS-30 can be used in an overlay or  
flush inset application. The specific application will affect  
panel sizes, opening dimensions and the installation.  
H
A
A
A
Overlay model ICBWS-30 will be shipped without handle  
hardware and with an overlay panel grille as standard  
equipment. Along with the door panel, you will need to  
provide a panel for the grille and hardware to complement  
your surrounding cabinetry.  
H
The overlay design allows the decorative panel to cover  
the door trim for a more seamless appearance. The most  
common way to achieve this look is to work with three  
panels—the decorative overlay panel, which is typically  
19 mm, a 3 mm spacer panel and a 6 mm backer panel.  
Depending on your cabinet manufacturer, this could be  
one panel routed for different dimensions. The illustrations  
below will give you a better idea of the panel construction  
and how it interacts with our frame. The size of the overlay  
panel is critical, it must fit over the door frame.  
A
W
ICBWS-30 Overlay  
DOOR  
W
762 mm  
740 mm  
756 mm  
H
Overlay Panel  
Spacer Panel  
Backer Panel  
1772 mm  
1751 mm  
1767 mm  
GRILLE  
W
762 mm  
740 mm  
756 mm  
H
235 mm  
211 mm  
227 mm  
Overlay Panel  
Spacer Panel  
Backer Panel  
IMPORTANT NOTE: Do not cover the glass door with a  
solid panel. The window cut-out edges of the overlay,  
spacer and backer panels will need to be finished, as they  
will be exposed.  
WINDOW  
W
H
1607 mm  
A
Cut-Out  
597 mm  
Location  
83 mm  
Overlay Panel Requirements  
Grille panel dimensions listed are for a standard 2134 mm  
overall height of the unit. For a 2108 mm overall height,  
subtract 25 mm from grille panel height dimensions. For a  
2235 mm overall height, add 102 mm to height dimensions.  
Width dimensions do not vary.  
MODEL ICBWS-30  
Max Panel Weight  
Min Panel Thickness  
34 kg  
16 mm  
OVERLAY  
PANEL  
SPACER  
PANEL  
SPACER PANEL  
Do not exceed overlay panel dimensions, as this could  
cause damage to panels and the Sub-Zero unit.  
OVERLAY PANEL  
BACKER PANEL  
BACKER  
PANEL  
TRIM  
DOOR FRAME  
GLASS  
8 mm min  
3 mm  
19  
6
mm  
3
mm  
typical  
mm  
Panel assembly cross section. Panel assembly rear view.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
61  
subzero.com/specs  
Model ICBWS-30  
FLUSH INSET PANEL  
FLUSH INSET PANEL SPECIFICATIONS  
Overlay model ICBWS-30 used in a flush inset application  
allows the decorative panel to cover the door trim for a  
seamless appearance. The most common way to achieve  
this look is to work with three panels—the decorative flush  
inset panel, which is typically 19 mm, a 3 mm spacer  
panel and a 6 mm backer panel. Depending on your  
cabinet manufacturer, this could be one panel routed for  
different dimensions. The illustrations below will give you a  
better idea of the panel construction and how it interacts  
with our frame. The size of the flush inset panel is critical,  
it must fit over the door frame.  
H
A
A
A
H
A
W
IMPORTANT NOTE: Do not cover the glass door with a  
solid panel. The inside edges of the rough opening as well  
as the sides and a portion of the back side of the decora-  
tive panels will need to be finished, as they will be  
exposed when the doors are open. The window cut-out  
edges of the overlay, spacer and backer panels will also  
need to be finished.  
ICBWS-30 Flush Inset  
DOOR  
W
787 mm  
740 mm  
756 mm  
H
1772 mm  
1751 mm  
1767 mm  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
GRILLE  
W
787 mm  
740 mm  
756 mm  
H
235 mm  
211 mm  
227 mm  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
IMPORTANT NOTE: For flush inset panels thicker than  
19 mm, a 90° door stop may be required to prevent inter-  
ference with adjacent cabinets.  
WINDOW  
W
H
1581 mm  
A
Cut-Out  
597 mm  
Location  
95 mm  
Flush Inset Panel Requirements  
MODEL ICBWS-30  
Max Panel Weight  
Min Panel Thickness  
34 kg  
16 mm  
Grille panel dimensions listed are for a standard 2134 mm  
overall height of the unit. For a 2108 mm overall height,  
subtract 25 mm from grille panel height dimensions. For a  
2235 mm overall height, add 102 mm to height dimensions.  
Width dimensions do not vary.  
FLUSH INSET  
PANEL  
SPACER  
PANEL  
SPACER PANEL  
FLUSH INSET PANEL  
Do not exceed flush inset panel dimensions, as this  
could cause damage to panels and the Sub-Zero unit.  
BACKER PANEL  
TRIM  
BACKER  
PANEL  
8 mm min  
19  
6
14  
mm  
3
mm  
mm  
typical  
mm  
Panel assembly cross  
section.  
Panel assembly rear view.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
62  
Model ICBWS-30  
FLUSH INSET PANEL  
DUAL INSTALLATIONS  
Illustrations A–D provide panel offsets and reveals for  
model ICBWS-30 in a flush inset application. Refer to the  
chart below for reference to the illustrations.  
When two models ICBWS-30 or a model ICBWS-30 and  
built-in unit are installed side by side, a dual installation kit  
may be required. Contact your Sub-Zero dealer for the  
proper components and installation instructions. For ques-  
tions relative to the installation, contact your Sub-Zero  
dealer. To obtain local dealer information, visit the find a  
showroom section of our website, subzero.com.  
For additional information on panel reveals, visit the speci-  
fication library section of our website, subzerotrade.com.  
Panel Offsets  
Illus.  
MODEL ICBWS-30  
Door / Grille Sides  
Grille Top  
DUAL STANDARD INSTALLATIONS  
A
B
C
D
Two overlay or stainless steel units may be placed side by  
side in a dual installation. Some dual standard installations  
will require a dual installation kit, available through your  
Sub-Zero dealer.  
Grille Bottom / Door Top  
Door Bottom  
A custom filler strip can be used in between two units in  
an overlay or stainless steel design application. It is rec-  
ommended that the filler strip be at least 51 mm wide, to  
prevent condensation between the units. Be sure to add  
the filler strip width to your rough opening width.  
TOP VIEW  
CABINETRY  
DOOR / DRAWER / GRILLE  
13 mm  
BACKER  
SPACER  
CABINETRY  
3
mm  
GRILLE  
Dual installations without a filler strip can only be accom-  
plished using two units with opposite hinges as shown in  
illustration A below. The dual installations shown in illus-  
trations B and C require a filler strip.  
8
mm  
FLUSH INSET PANEL  
8 mm  
13  
mm  
16  
mm  
SIDE VIEW  
IMPORTANT NOTE: For the application shown in illustra-  
tion A, a dual installation accessory kit is required.  
Illus. A  
Illus. B  
DOOR /  
DRAWER  
FILLER STRIP REQUIRED  
WITHOUT FILLER STRIP  
FILLER STRIP REQUIRED  
8
mm  
GRILLE  
4
mm  
8
13 mm  
mm  
DOOR  
2
mm  
8
mm  
Illus. A  
Illus. B  
Illus. C  
2
SIDE VIEW  
mm  
SIDE VIEW  
Illus. C  
Illus. D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
63  
subzero.com/specs  
Model ICBWS-30  
DUAL FLUSH INSET INSTALLATIONS  
DUAL FLUSH INSET PANEL SPECIFICATIONS  
Installing two models ICBWS-30 or a model ICBWS-30  
and built-in unit side by side in a flush inset application will  
require adjustments to the dimensions of your finished  
rough opening, panel sizes and panel offsets. It will also  
require a dual installation kit, available through your  
Sub-Zero dealer.  
H
A
A
A
H
Dual installations without a filler strip can only be accom-  
plished using two units with opposite hinges as shown in  
illustration A below. The dual installations shown in illus-  
trations B and C require a filler strip. Illustration A is the  
only application that will accommodate the dual wide  
grille.  
A
W
IMPORTANT NOTE: The application shown in illustration A  
can only be achieved by installing dual flush inset panels.  
Failure to install dual flush inset panels will cause the  
handle side of the panels to collide when closing. In this  
application a dual installation accessory kit is also  
required.  
ICBWS-30 Dual Flush Inset  
DOOR  
W
775 mm  
740 mm  
756 mm  
H
1772 mm  
1751 mm  
1767 mm  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
GRILLE  
W
775 mm  
740 mm  
756 mm  
H
235 mm  
211 mm  
227 mm  
Flush Inset Panel  
Spacer Panel  
Backer Panel  
Dual flush inset panels and dual installation kits are avail-  
able through your Sub-Zero dealer. Refer to the illustration  
and chart for dual flush inset panel specifications.  
WINDOW  
W
H
1581 mm  
A
Cut-Out  
584 mm  
Location  
95 mm  
FILLER STRIP REQUIRED  
WITHOUT FILLER STRIP  
FILLER STRIP REQUIRED  
Grille panel dimensions listed are for a standard 2134 mm  
overall height of the unit. For a 2108 mm overall height,  
subtract 25 mm from grille panel height dimensions. For a  
2235 mm overall height, add 102 mm to height dimensions.  
Width dimensions do not vary.  
Illus. A  
Illus. B  
Illus. C  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
64  
Model ICBWS-30  
DUAL FLUSH INSET PANELS  
TOP VIEW  
TOP VIEW  
DOOR / DRAWER / GRILLE  
When installing two models ICBWS-30 or a model  
ICBWS-30 and built-in unit side by side in a flush inset  
application, you must decrease the width of the decorative  
flush inset panels by 13 mm. Adjustments to the panel  
offsets will also need to be made. These adjustments are  
needed to achieve a proper fit and to ensure the panels do  
not collide when closing. Panel dimensions in the chart  
below have been adjusted to reflect the decrease in panel  
dimensions.  
DUAL  
TRIM  
DOOR  
DOOR  
BACKER  
SPACER  
CABINETRY  
FLUSH INSET PANEL  
8 mm  
8 mm  
3 mm  
13  
mm  
16  
6 mm  
mm  
REVEAL  
IMPORTANT NOTE: If a filler strip is not used, dual instal-  
lations can only be accomplished using two units with  
opposite hinges.  
Illus. A  
Illus. B  
CABINETRY  
Illustrations A–E provide panel offsets and reveals for  
model ICBWS-30 in a flush inset application. Refer to the  
chart below for reference to the illustrations. All reveals are  
13 mm unless otherwise specified.  
8
13 mm  
mm  
GRILLE  
4
mm  
3
mm  
GRILLE  
8
13 mm  
mm  
For additional information on panel reveals, visit the speci-  
fication library section of our website, subzerotrade.com.  
DOOR  
2
mm  
8
mm  
SIDE VIEW  
SIDE VIEW  
Do not exceed the flush inset decorative panel  
dimensions. Exceeding dimensions could cause  
damage to the panels and the Sub-Zero unit.  
Illus. C  
Illus. D  
DOOR /  
DRAWER  
Panel Offsets  
Illus.  
MODEL ICBWS-30  
Doors (hinge) / Grille Sides  
Doors (handle) Sides  
Grille Top  
A
B
C
D
E
8
mm  
Grille Bottom / Door Top  
Door Bottom  
2
SIDE VIEW  
mm  
Illus. E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
65  
subzero.com/specs  
Side Panels  
Handle Hardware  
MODEL ICBWS-30  
For overlay and integrated models, handle hardware must  
be provided. Optional stainless steel tubular and pro  
handles are available through your authorized Sub-Zero  
dealer.  
When planning for side panels with the installation of the  
model ICBWS-30, you need to be aware of the space con-  
figuration to achieve a pleasing fit. Depending on the exact  
panel you are using, the height of the panel may vary.  
The door frame has numerous mounting holes on each  
side to accommodate handle hardware. Using the pre-  
drilled holes to attach the handle will provide the best  
alignment and strength.  
IMPORTANT NOTE: The use of side panels may change  
the width of your rough opening.  
When installing a model ICBWS-30 with a custom side  
panel, an accessory kit (7003407) is required. Stainless  
steel side panels are also available through your author-  
ized Sub-Zero dealer.  
IMPORTANT NOTE: Refer to the full-scale template at the  
end of this section for a profile of the door frame and  
position of the glass. Do not drill through the glass.  
The side panel will need to be a minimum of 610 mm deep  
and 13 mm thick. Refer to the illustrations below for side  
panel dimensions. Routing will be necessary so that the  
side panel fits flush against the side of the unit.  
610 mm  
FRONT  
OF SIDE  
PANEL  
25 mm  
48 mm  
3 mm  
ROUT TO 3 mm  
13 mm  
48 mm  
25 mm  
MAIN  
FRAME  
SIDE PANEL  
ROUTING  
2134  
mm  
Routing detail.  
102 mm  
OPTIONAL  
TOE KICK  
CUT-OUT  
67 mm  
Side panel dimensions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
Accessories  
66  
Door Frame Profile  
These optional accessories are available through your  
authorized Sub-Zero dealer. For local dealer information,  
visit the find a showroom section of our website,  
subzero.com.  
FULL-SCALE TEMPLATE  
The full-scale template below shows an example of the  
door frame profile for wine storage models and the rela-  
tionship to the overlay panel (rails and stiles).  
•
•
Front panels in stainless steel with handle options.  
Dimension  
A
Grilles for a 2108 mm or 2235 mm finished height for  
model ICBWS-30.  
ICB424G  
ICB427G and ICB427RG  
ICBWS-30  
25 mm  
22 mm  
24 mm  
•
•
Side panels in stainless steel and white enamel for  
model ICBWS-30.  
Tubular and pro handles to match the style of Wolf  
ovens and ranges.  
•
•
•
Door lock kits.  
Dual installation kits.  
Harness kit for Star-K compliance.  
GLASS  
STANDARD HANDLES  
Refer to the chart below for standard handle lengths and  
the stud spacing of tubular and pro handles used on wine  
storage models.  
CABINET DOOR  
PROFILE  
C
L
Standard Handles  
Length Stud Spacing  
A
A
ICB424G, ICB424FSG, ICB427RG DRAWERS  
Tubular Handle  
Pro Handle  
614 mm  
533 mm  
413 mm  
500 mm  
57 mm RAIL/STILE  
ICB427G AND ICB427RG DOOR  
Tubular Handle  
Pro Handle  
1046 mm  
1006 mm  
845 mm  
973 mm  
ICBWS-30  
DOOR FRAME PROFILE  
MODEL ICB424G SHOWN  
Tubular Handle  
Pro Handle  
1622 mm  
1147 mm  
1114 mm  
1114 mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
67  
subzero.com/specs  
Wine Shelf Wood Facing  
FULL-SCALE TEMPLATE  
Dimension  
A
ICB424G and ICB424FSG  
ICB427G and ICB427RG  
ICBWS-30  
495 mm  
532 mm  
624 mm  
For each model, the wine storage shelves have a natural  
cherrywood facing. You can replace these strips with  
wood more complementary to your design and surround-  
ing cabinetry. Refer to the full-scale template below.  
To remove the cherry strips, take the shelves out and  
remove the screws. Reverse the procedure to affix the  
new wood facing.  
IMPORTANT NOTE: If you choose to stain or seal the  
wood facing, be aware that some of these substances are  
hazardous and will damage stored wine.  
16 mm  
MAXIMUM THICKNESS  
3 mm  
38 mm  
21  
mm  
2
mm  
9 mm  
14 mm  
A (WIDTH)  
SIDE VIEW  
FRONT VIEW  
WINE SHELF WOOD FACING  
WINE STORAGE MODELS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Storage  
68  
Door Clearance  
FULL-SCALE TEMPLATE  
Model ICB424G should extend a  
minimum of 6 mm beyond the front  
surface of adjoining cabinetry to allow  
for the maximum 145° door opening.  
The unit can be installed flush with  
adjacent cabinetry, however, there is  
potential for interference with the  
panel if the door is opened past 90°.  
MODEL ICB424  
DOOR CLOSED  
13  
mm  
19 mm DOOR PANEL  
6 mm  
3 mm  
MAXIMUM DOOR  
OPENING 145°  
0 mm  
25 mm  
DOOR OPENING 145°  
TOP VIEW  
SCALE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUB-ZERO, INC.  
PO BOX 44848  
MADISON, WI 53744 USA  
SUBZERO.COM  
ISZDG 6 / 2010  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shark Carpet Cleaner S3251 User Manual
Shure Headphones PGA98H User Manual
Sony Cell Phone M2 User Manual
Sony Digital Camera CCU D50P User Manual
Sony Stereo System XA5400ES User Manual
Sony VCR GV D900 User Manual
Sony Webcam PCS G70 User Manual
Star Micronics Printer ND 10 15 User Manual
Sunwave Tech Universal Remote SRC 3000b User Manual
SVA Security Camera CRR 1104H User Manual