Integrated Refrigeration Design Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
INTEGRATED REFRIGERATION
Integrated Refrigeration
With custom front panels and hardware, Sub-Zero invented
integrated columns, tall and drawer models that disappear
into the decor. Integrated units fit flush with other cabinets,
making integrated refrigeration as practical and beautiful in
the master suite, bar or theatre room as in the kitchen.
KEY FEATURES
•
•
•
•
•
Custom front panels and hardware allow for infinite
design options.
Point-of-use refrigeration that can be placed anywhere in
the home.
Dual refrigeration; two compressors preserve food’s
goodness in self-contained compartments.
Energy efficient; many models are ENERGY STAR®
qualified.
Drawer models are Star-K certified—column and tall
models are Star-K compliant with harness kit.
INTEGRATED MODELS
IC-27R
IC-27FI
700TR
700TFI
700TCI
736TFI
736TCI
700BR
700BF(I)
700BC(I)
736TR
subzero.com/specs
|
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTEGRATED REFRIGERATION
Specifications
Overall Dimensions
COLUMN
INTERIOR CAPACITY
COLUMN
IC-27R
IC-27FI
R CU FT (L)
F CU FT (L)
27" (686)
14"(356)
24" (610)
16.3 (462)
15.7 (445)
TALL
R CU FT (L)
F CU FT (L)
5
(41)
1 /8"
700TR
700TFI
700TCI
736TR
736TFI
736TCI
15.5 (439)
15.3 (433)
5.1 (144)
10.2 (289)
20.9 (592)
9
21.5 (609)
7.1 (201)
78 /16"
(1995)
13.3 (377)
DRAWER
700BR
700BF(I)
700BC(I)
R CU FT (L)
F CU FT (L)
81"
(2057)
5.3 (150)
TO TOP OF
OPENNG
5.1 (144)
2.1 (59)
2.9 (82)
SHIPPING WEIGHT
COLUMN
LB (KG)
IC-27R, IC-27FI,
360 (163)
TALL
LB (KG)
360 (163)
480 (218)
700TR, 700TFI, 700TCI
736TR, 736TFI, 736TCI
3
9 /4"(248)
DRAWER
LB (KG)
700BR, 700BF(I), 700BC(I)
190 (86)
4"
1
HEIGHT DIMENSIONS /2"(13)
(102)
IMPORTANT NOTE: Overall dimensions do not include
panels or handles. Dimensions will vary with panel
thickness.
24"
(610)
5
4 /8"
(117)
1
25 /2"
(648)
4
|
Sub-Zero Customer Care 800.222.7820
Download from Www.Somanuals.com. All Manuals Search And Download.
INTEGRATED REFRIGERATION
Overall Dimensions
TALL
DRAWER
3
(10)
W
24" (610)
27" (686)
24" (610)
/8"
14"(356)
13
(21)
/16"
1
13 /4"
(337)
1
(13)
/2"
1
34 /2"
(876)
1
10 /4"
9
(260)
78 /16"
(1995)
3
20 /8"
(518)
3
80"
(2032)
9 /4" (248)
TO TOP OF
OPENNG
3
(10)
4"
/8"
1
HEIGHT DIMENSIONS /2"(13)
(102)
1
13 /4"
1
(13)
/2"
(337)
24"
1
34 /2"
(610)
1
(876)
10 /4"
(260)
3
20 /8"
(518)
3
9 /4"
(248)
1
4"
19 /2"
1
HEIGHT DIMENSIONS /2"(13)
(102)
(495)
7
25 /8" (657)
24"
(610)
A
1
19 /2"
B
(495)
TALL
MODEL
W
A
B
700TR, 700TFI, 700TCI
736TR, 736TFI, 736TCI
27" (686)
36" (914)
45/8" (117) 251/2" (648)
7" (178) 341/2" (876)
subzero.com/specs
|
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTEGRATED REFRIGERATION
Opening Dimensions
INTEGRATED MODELS
OPENING DIMENSIONS
COLUMN
W
H
IC-27R, IC-27FI
27" (686)
81" (2057)
25" (635)
OPENING
DEPTH
TALL
W
27" (686)
36" (914)
H
80" (2032)
80" (2032)
700TR, 700TFI, 700TCI
736TR, 736TFI, 736TCI
DRAWER
W
H
TOP VIEW
700BR, 700BF(I), 700BC(I)
27" (686)
341/2" (876)
The depth of each integrated model is 24" (610). Allow for
panel thickness when planning the finished opening depth.
DUAL INSTALLATION
When installing two units side by side in a dual installa-
tion, the opening width is the width of the two units added
together. A dual installation kit will be required for this instal-
lation. If a dual installation kit is not specified, a minimum
2" (51) filler strip is required between units.
H
W
OPENING
HEIGHT
OPENING WIDTH
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the find a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
IMPORTANT NOTE: Due to a more robust hinge on the 36"
unit, if a 27" tall unit is installed next to a 36" unit, the door
panels will align but interior face frames will not. This is only
apparent when both doors are open. Refer to the illustration
below.
SIDE VIEW
FRONT VIEW
736TCI
Face frame alignment.
6
|
Sub-Zero Customer Care 800.222.7820
Download from Www.Somanuals.com. All Manuals Search And Download.
INTEGRATED REFRIGERATION
Electrical
Plumbing
The electrical supply must be located within the shaded
area shown in the illustration and chart below. A separate
circuit, servicing only this appliance is required. A ground
fault circuit interrupter (GFCI) is not recommended and may
cause interruption of operation.
The water supply line should be located within the shaded
area shown in the illustrations below. The water supply line
should be connected to the house supply with an easily
accessible shut-off valve. Do not use self-piercing valves.
The water supply line must not interfere with installation of
the anti-tip bracket.
The electrical outlet must be positioned with the grounding
prong to the right of the thinner blades.
A reverse osmosis system can be used provided there is
constant water pressure of 20–100 psi (1.4–6.9 bar) supplied
to the unit at all times. A copper line is not recommended
for this application.
Installation must comply with all applicable electrical codes.
ELECTRICAL REQUIREMENTS
Electrical Supply
Service
115 VAC, 60 Hz
15 amp
Installation must comply with all applicable plumbing codes.
PLUMBING REQUIREMENTS
Receptacle
3-prong grounding-type
Water Supply
1/4" OD copper, braided
stainless steel or PEX tubing
ELECTRICAL SUPPLY LOCATION
Pressure
20–100 psi (1.4–6.9 bar)
27" (686)
MODEL
A
13" (330)
171/2" (445)
Excess Line for Connection
27" Model
36" Model
WATER SUPPLY LOCATION
MODEL
A
9" (229)
131/2" (343)
27" Model
36" Model
LEFT SIDE
OF OPENING
1
1 /2" (38)
1
2 /2"
(64)
A
BACK WALL
RIGHT SIDE
OF OPENING
1
4 /2"
6"
(114)
(152)
FLOOR
1
A
2 /2"
(64)
1
/4" (6)
1
A
2 /2"
(64)
3" (76)
Electrical supply location.
RIGHT SIDE
OF OPENING
FLOOR
3
/4" (19)
Water supply location (rear).
Water supply location (bottom).
subzero.com/specs
|
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INTEGRATED REFRIGERATION
Custom Panels
For integrated models, custom door panels and handle
hardware must be provided. Refer to the panel requirements
chart and integrated panel dimensions.
INTEGRATED PANEL DIMENSIONS
The thickness of the custom panel can vary. A minimum
5/8" (16) thick panel is required, but the thickness can be
increased provided it does not exceed the weight limit. The
depth of each integrated model is 24" (610). Allow for panel
thickness when planning the finished opening depth. Refer
to the full-scale template on page 11.
7
3
76 /8"
45 /8"
(1953)
(1153)
9
13 /16"
(345)
CAUTION
11
When using a 3/4" (19) or thicker panel with a reveal less
than 1/4" (6), panel may cause damage to the unit when
door is opened to 105°. Use the built-in 90° door stop.
16 /16"
(424)
W
W
W
Column
Tall
Drawer
CAUTION
As reveals between cabinetry and the unit decrease,
severe finger pinching can occur while door is closing.
Typical panel dimensions are based on an 81" (2057) finished
height for column models, 80" (2032) for tall models and
341/2" (876) for drawer models, with a 4" (102) toe kick and
1/8" (3) reveals. Panel dimensions must be adjusted accord-
ingly for all other installations. Refer to the illustration for
panel heights and the chart below for panel widths.
Finish all sides of custom panels. They will be visible when
the door/drawer is open.
D-style handles are recommended. Door handles must be
located near the edge of the panel opposite the hinge and
should be centered top to bottom. Drawer handles must
be located near the top edge of each panel. Stainless steel
tubular and pro handles are available through an authorized
Sub-Zero dealer. For local dealer information, visit the find a
showroom section of our website, subzero.com.
PANEL WIDTH
MODEL
W
263/4" (679)
353/4" (908)
27" Model
36" Model
DUAL INSTALLATION
PANEL REQUIREMENTS
For dual installations, refer to the illustration for panel
heights and the chart below for panel widths.
PANEL WEIGHT
Column
27" Tall (door)
36" Tall (door)
MAX
65 lb (29 kg)
40 lb (18 kg)
53 lb (24 kg)
PANEL WIDTH
MODEL
W
PANEL WEIGHT
27" Drawer
36" Drawer
MAX
13 lb (6 kg)
16 lb (7 kg)
27" Model
36" Model
2613/16" (681)
3513/16" (910)
PANEL THICKNESS
MIN
All Panels
5/8" (16)
8
|
Sub-Zero Customer Care 800.222.7820
Download from Www.Somanuals.com. All Manuals Search And Download.
INTEGRATED REFRIGERATION
Custom Panels
DOOR PANEL HEIGHT
TOE KICK CLEARANCE
The height of the custom door panel can extend beyond the
typical panel height, provided it does not exceed the weight
limit. Refer to the illustration below.
The height of the toe kick area can extend beyond the
typical toe kick height, provided it does not exceed the
dimensions in the illustration below.
25" (635) TO WALL
1
(38)
1 /2"
DECORATIVE VALANCE
CANNOT EXTEND BEYOND
THE FRONT OF THE MOLDING
1
/8"(3)
HEIGHT
OF PANEL
KICKPLATE/ GRILLE
CAN BE ADJUSTED
FORWARD
OVERALL
HEIGHT
DOOR
PANEL
DECORATIVE VALANCE
KICKPLATE/ GRILLE
1
/8"(3)
BASE MOLDING
MUST BE
REMOVABLE—
4" (102) MAX
HEIGHT
REMOVABLE MOLDING
HINGE
MINIMUM
HEIGHT
4" (102) TO 9" (229)
FROM FLOOR
25" (635) TO WALL
TYPICAL
HEIGHT
OF DOOR
PANEL
5
2 /8" (67) TO 4" (102)
Upper valance (column and tall)—side view.
Toe kick—side view.
subzero.com/specs
|
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INTEGRATED REFRIGERATION
Handle Hardware
Optional stainless steel tubular and pro handles are avail-
able through an authorized Sub-Zero dealer. For local dealer
information, visit the find a showroom section of our
website, subzero.com.
Refer to the chart below for the length and stud spacing of
standard handles for integrated models.
STANDARD HANDLES
DOOR
Tubular
Pro
LENGTH
413/16" (1046)
399/16" (1006)
STUD SPACING
331/4" (845)
385/16" (973)
27" DRAWER
Tubular
Pro
LENGTH
243/16" (614)
21" (533)
STUD SPACING
161/4" (413)
1911/16" (500)
36" DRAWER
Tubular
Pro
LENGTH
333/16" (843)
30" (762)
STUD SPACING
251/4" (641)
283/4" (730)
10
|
Sub-Zero Customer Care 800.222.7820
Download from Www.Somanuals.com. All Manuals Search And Download.
INTEGRATED REFRIGERATION
INTEGRATED
DOOR
MAXIMUM 105° OPENING
Maximum Door Opening
FULL-SCALE TEMPLATE
If the panel is thicker than 3/4" (19), use the built-in 90° door
stop to prevent damage to the panel and face frame at the
maximum door opening.
LINE OF
INTERFERENCE
105° opening—1/4 scale (top view).
LINE OF INTERFERENCE
MAXIMUM 105° OPENING
1
/
8"
(3) MINIMUM REVEAL
FRAMED PANEL
3
/
4"
(19)
MOUNTING BRACKET
INTEGRATED DOOR CLOSED
LINE OF INTERFERENCE
SIDE MOLDING AND
INSTALLATION HARDWARE
0"
1" (25)
SCALE
Door closed (top view).
subzero.com/specs
|
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Sub-Zero Residential Limited Warranty
FOR RESIDENTIAL USE
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, this Sub-Zero product warranty covers all parts and
labor to repair or replace, under normal residential use, any part of the product that proves to be defec-
tive in materials or workmanship. All service provided by Sub-Zero under the above warranty must be
performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will
be provided during normal business hours.
FULL FIVE YEAR SEALED SYSTEM WARRANTY
For five years from the date of original installation, this Sub-Zero product warranty covers all parts and
labor to repair or replace, under normal residential use, these parts that prove to be defective in materials
or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. All service provided
by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless
otherwise specified by Sub-Zero, Inc. Service will be provided during normal business hours.
LIMITED TWELVE YEAR SEALED SYSTEM WARRANTY
For twelve years from the date of original installation, Sub-Zero will repair or replace the following parts
that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all
connecting tubing. If the owner uses Sub-Zero factory certified service, the service provider will repair or
replace these parts with the owner paying for all other costs, including labor. If the owner uses non-certi-
fied service, the owner must contact Sub-Zero, Inc. (using the information below) to receive repaired or
replacement parts. Sub-Zero will not reimburse the owner for parts purchased from non-certified service
or other sources.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only to
products installed in any one of the fifty states of the United States, the District of Columbia or the ten
provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by
negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO, INC.
WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF
LAW. SUB-ZERO, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS,
IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also
have other legal rights that vary from state to state.
To receive parts and/or service and the name of Sub-Zero factory certified service nearest you, contact
Sub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website,
subzero.com, email us at [email protected] or call 800-222-7820.
*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited
60-day parts and labor warranty for cosmetic defects.
*Replacement water filters and air purification cartridges are not covered by the product warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sub-Zero, Sub-Zero & Design, Dual Refrigeration, Constant Care, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trade-
marks and service marks of Sub-Zero, Inc. Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf
Appliance, Inc. (collectively, the “Company Marks.”) All other trademarks or registered trademarks are property of their respective owners in the United States and other countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUB-ZERO, INC. P.O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820
SZIN700DG
9/2013
Download from Www.Somanuals.com. All Manuals Search And Download.
|