C O M M E R C I A L
®
SANDBLASTER SBN
Low NO Commercial Gas Water Heater
x
80% Thermal Efficiency
Front, Top or Rear Water Connections
State Water Heaters’ Sandblaster is the original Self-Cleaning commercial gas water heater, with
a proven design that automatically reduces sediment buildup, the number one threat to any water
heater’s life expectancy and energy-efficiency.
Hydro Cannon Self-Cleaning Device
Complies with SCAQMD Rule 1146.2
Southern California and Texas Apporved
The new computer designed Hydro Cannon self-cleaning device
injects cold water into the tank under pressure and then uses a
venturi action to create self-cleaning turbulence. Self-Cleaning
action keeps sediment in suspension, and keeps it moving, so it
does not get a chance to settle down. Sediment that would
otherwise build up in the tank is harmlessly carried out when hot
water is drawn. With reduced sediment buildup, Sandblaster
commercial water heaters retain their rated efficiency longer,
last longer, and help keep water heating costs down!
3-Year or Optional 5-Year Tank Warranty.
Low NO – Complies with SCAQMD Rule 1146.2. Southern Califorina
x
and Texas Approved.
ASME Constructionavailable on 200,000 thru 500,000 Btu sizes.
Induced Draft Built-In Blower – Blower is built into the top cover, factory
mounted and wired. No draft hood or barometric damper required.
Hydro Cannon Self-Cleaning Feature – New computer designed device
automatically reduces harmful sediment buildup inside the tank. Sandblaster® SBN™ stays
energy-efficient, so it saves money throughout its life.
Foam insulation– Reduces heat loss over 2-1/2 times more effectively than
standard fiberglass.
CSA Certified and ASME Rate T&P Relief valve
Factory-installed Energy Cut-Off (“ECO”) safety switch.
Tank Inspection Port for easy access to tank interior on all models.
Maximum Hydrostatic Working Pressure: 160 psi.
Three Water Connection Options – Inlet and outlet connections are located
on the top, front and rear offering installation flexibility (Hydro Cannon device on front
connection only).
– Design certified by the Underwriter’s
Fully Tested for Safety and Performance
Anodes – Long lasting stainless steel core anodes.
Laboratory for 180°F hot water service. Meets rigid requirements of the National Sanitation
Foundation when equipped with optional leg kit. Certified for use on combustible flooring.
Meets or exceeds the thermal efficiency and/or standby loss requirements of the U.S.
Department of energy and current addition of ASHRAE/IESNA 90.1.
On/Off Power Switch – Eliminates the need
to wire a separate electrical connection box.
Intermittent Ignition Device – Eliminates
standing pilot and provides flame failure response
in less than one second.
Options:
– Kit #9003425205.
– Leg Kit for UL Sanitation to Meet NSF 5
Glass Lined Tank – Glass is applied after the
complete tank has been assembled to give a
seamless barrier against corrosion by hot water.
– Manifold Kits for Multiple Gas Heater Installations:
Dual Manifold Kit #9003426205
Triple Manifold Kit #3003427205
Quad Manifold Kit #3003428205
For more information on Sandblaster® contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365-0024 Toll-free USA
SCGSS000407 August 2008R
197285_SCGSS000407.indd
1
8/15/08 8:57:36 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|