POWER SUPPLY
Reliable 400 Watt Replacement ATX
Power Supply
ATXPOWER400
Instruction Guide
* Actual product may vary from photo
Revised: June 9, 2003
The Professionals’ Source For Hard-to-Find Computer Parts
Download from Www.Somanuals.com. All Manuals Search And Download.
1
4
Product Specifications
Table of Contents
Dimensions
Output Power
Hold-Up Type
Fan Type
5.9 x 3.35 x 5.87 in. (150 x 85 x 149mm)
400W
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
< 16 ms @ full load
Sleeve bearing
Connectors
6 x 4-pin-LP4-female
2 x small-internal-power
1 x 20-pin-ATX-motherboard-adapter
1 x 4-pin extended ATX power 12V plug and Aux
plug for Pentium 4
MTBF
100,000 Hours @ 25ºC
Safety Approvals
AC INPUT
TUV, UL, CSA, CE, FCC, CB
Voltage 115V~ Current 8A
Voltage 230V~ Current 4A
Frequency 50~60Hz
DC OUTPUT
+3.3V(30A)
+5V(40A)
+12V(18A)
-5V(1A)
-12V(1A)
+5V Standby (2.5A)
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Introduction
Installation
Thank you for buying a StarTech.com 400-Watt replacement power supply. The
ATXPOWER400 is guaranteed compatible with Intel and AMD processors and designed
for an extra long-life in personal and industrial computers. This power supply ensures
stable system performance and uses an automatic temperature control fan to maintain an
optimal operating environment for heat-sensitive components.
Check the red power supply voltage switch before installation. It should be the same as
your local power voltage (115V for North America and 230V for most of the European
countries). Change the voltage setting if necessary.
1. Make sure that your system is turned off and unplugged. Disconnect the power cord
from your old power supply.
Features
2. Open the case (consult your computer’s user guide for details, if necessary).
•
Automatically detects temperature and adjusts fan speed to maintain optimal
performance
NOTE: Before completing the next step, you may want to take note of what devices are
attached to your current power supply so you know which devices need to be connected
to the new power supply and where their connectors are located.
•
•
•
•
•
Provides extra power capacity for PC servers with several hard drives
Provides the extra current required by 1 GHz and faster CPUs
Provides extra power required by leading edge 3D video accelerator cards
Provides extra current and power capacity for overclocking CPUs
3. Disconnect all power connectors from the motherboard and the peripheral devices
such as hard drives, floppy disks, etc. Make sure that there are no devices connected
to your existing power supply.
4. Remove the existing power supply from your computer case and replace it with the
new StarTech.com power supply.
Uses superior EMI/ RFI power filtration system to ensure system components receive
clean, stable power
5. Connect the power connectors to your motherboard and peripheral devices.
6. Close your computer case.
•
Backed by StarTech.com’s two-year warranty
7. Connect the power cord to the StarTech.com power supply.
WARNING! Computer parts can be severely damaged by static electricity. Be sure that
you are properly grounded before opening your computer case. StarTech.com
recommends that you wear an anti-static strap when installing any computer
component. If an anti-static strap is unavailable, discharge yourself of any static
electricity build-up by touching a large grounded metal surface (such as the computer
case) for several seconds. Also make sure that your computer is turned off and
unplugged before attempting to open your computer case.
ATXPOWER400 Connectors
Contents
This package should contain:
•
•
1 x ATXPOWER400 power supply
1 x power cord
Download from Www.Somanuals.com. All Manuals Search And Download.
|