Triple video docking station for laptops
USB3DOCKH2DP
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the latest information, technical specifications, and support for
this product, please visit www.startech.com/USB3DOCKH2DP
Manual Revision: 06/02/2015
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction............................................................................................1
Packaging contents.................................................................................................................................. 1
System requirements............................................................................................................................... 1
Product diagram ....................................................................................2
Front view .................................................................................................................................................... 2
Rear view...................................................................................................................................................... 2
About USB 3.0 and USB 3.1 Gen 1 .......................................................3
About installation ..................................................................................3
Install the driver......................................................................................................................................... 3
Install the hardware.................................................................................................................................. 3
About the docking station ports .........................................................4
Charge a device ......................................................................................4
Charge an iPad with a 30-pin dock connector ............................................................................... 4
Configure a display device....................................................................4
Use DisplayLink to configure a display device ............................................................................... 4
About the display options ....................................................................5
Use Mac OS to configure a display device ....................................................................................... 6
Use Mac OS to change the display mode......................................................................................... 6
Use Mac OS to change the primary display..................................................................................... 6
Supported video resolutions ...............................................................7
Technical support...................................................................................8
Warranty information............................................................................8
Instruction Manual
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Packaging contents
•
•
•
•
1x triple video laptop docking station
1x USB 3.0 host cable
1x universal power adapter (NA/EU/UK/AU)
1x instruction manual
System requirements
•
•
•
USB-enabled host computer system with an available USB 3.0 port
Available AC electrical outlet
DisplayPort™ and HDMI® enabled display(s) with cables as desired (for additional
external displays)
•
•
•
•
Windows® 7 (32-bit and 64-bit)
Windows 8 (32-bit and 64-bit)
Windows 8.1 (32-bit and 64-bit)
Mac OS®10.8 and later (tested up to 10.10)
Note: If you connect the docking station to a USB 2.0 host port or if you use a USB 2.0
host connection cable, performance may be limited.
Operating system requirements are subject to change. For the latest requirements,
please visit www.startech.com/USB3DOCKH2DP
Instruction Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Product diagram
Front view
3.5mm TRRS headset port
(audio and microphone)
USB 3.0 fast-charge and
sync port
Rear view
Microphone
input
Power
switch
USB 3.0
ports
USB 3.0
host port
HDMI
port
RJ45
port
Audio
output
DC input
port
DisplayPort 1
DisplayPort 2
Security
lock port
Instruction Manual
2
Download from Www.Somanuals.com. All Manuals Search And Download.
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard offers speeds up to 5
Gbps.
About installation
Depending on the version of operating system that you’re currently running and
whether your network connection is active, the docking station might install
automatically or download the proper drivers when the dock is connected to an
available USB port on the host system.
If you receive a prompt to automatically install the driver, complete the on-screen
instructions to complete the installation.
Install the driver
USB3DOCKH2DP.
2. Click the Support tab.
3. Click the driver file and complete the on-screen instructions to download the file.
4. Browse to the location of the driver file that you downloaded and do one of the
following:
If the operating system that you’re using is a version of Windows, run the
DisplayLink “exe” install file.
If the operating system that you’re using is a version of Mac OS, run the
DisplayLink “dmg” install file.
5. Follow any on-screen instructions to complete the driver installation process.
Note: You may be asked to restart your host laptop(s) to complete the installation.
Install the hardware
1. Select the appropriate regional clip for your region and connect the power adapter
to an AC electrical outlet.
2. Connect the power adapter to the DC input on the docking station.
3. Attach the provided USB 3.0 cable to the USB 3.0 port on the docking station and
then to an available USB 3.0 port on the host laptop.
5. Connect your DisplayPort and/or HDMI displays to the corresponding ports on the
docking station.
6. As necessary, connect any other devices to the docking station, including an RJ45
network connection, USB peripherals, a headset, speakers, or microphones.
Instruction Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
About the docking station ports
The four USB ports located at the back of the docking station are standard USB 3.0
throughput ports. When the docking station is connected to a host laptop, these ports
provide a trickle charge to a selection of devices.
The side USB 3.0 port is compliant with Battery Charging Specification Revision 1.2 (BC
1.2), which means that you can use the port to connect and charge a device faster than
a traditional standard USB 3.0 port.
This side USB 3.0 port can fast-charge a connected device, even when the docking
station isn’t connected to a host laptop. When the docking station is connected to a
host laptop, the side USB 3.0 port functions as a Charging Downstream Port (CDP),
which has simultaneous charge and sync capabilities.
Charge a device
If you’re only using the side USB 3.0 port to charge a device, a connection to a host
laptop isn’t required.
•
To charge a device, connect a device to the USB 3.0 port located on the side of the
docking station.
Note: The side USB 3.0 port can only fast-charge connected devices that comply to
USB Battery Charging Specification Revision 1.2.
Charge an iPad with a 30-pin dock connector
The following steps only apply to an iPad with a 30-pin connector. An iPad that uses
a Lightning connector can be charged using the USB port located on the side of the
docking station.
1. Make sure that the host laptops are not connected to the docking station.
2. Connect the iPad to the USB 3.0 port located on the side of the docking station.
Note: If you connect a host laptop to the docking station while you’re charging a first-
generation iPad, the iPad will switch to data sync mode and stop charging. To switch
back to charging mode, disconnect the host laptop and the iPad from the docking
station. Then connect the iPad to the docking station again.
Configure a display device
Use DisplayLink to configure a display device
1. Connect a display device (monitor, projector, and so on) to the docking station.
2. If necessary, to display all of the available icons, click the Show hidden icons arrow
Instruction Manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
on the toolbar.
3. Click the DisplayLink icon.
4. Click StarTech USB3DOCKH2DP.
5. In the drop-down list, click a configurable option.
Each display is configured independently from all of the connected displays.
Note: If you’re using a computer that’s running Windows 7 or Windows 8, you can also
adjust a display device on the Display Settings screen.
About the display options
The following information describes the display configurations available using the
DisplayLink utility.
Extend
Select this option to display an extension of your active Windows desktop on the
display that’s connected to the docking station. When you select this option, you can
view more applications or documents at the same time. The display is extended in the
direction it was the last time that the display was in Extend mode.
For more control, click Extend To and select one of the options. This puts the display
into Extend mode, and places the display to the right or left, above, or below the
primary display.
Mirror
Select this option to display a duplication of the primary display on the display that’s
connected to the docking station. The resolution, color depth, and refresh rate of the
primary display are replicated on the connected display.
Note: When the connected monitor uses a different specification than the primary
display, the system’s primary graphics adapter scales all of the settings to a lower
specification to maintain a uniform aspect ratio.
Extend To
Select this option to specify the physical location of the display that’s connected to the
docking station in relation to the system’s primary monitor.
Screen Resolution
Select this option to change the resolution on the display that’s connected to the
docking station.
Screen Rotation
Select this option to change the orientation in which the screen is viewed. The two
most common orientation types are portrait and landscape.
Instruction Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Set as Main Monitor
Select this option to specify the display that’s connected to the docking station as the
primary display. The primary display shows all of the system notifications, and takes
priority with applications.
Off
Select this option to disable the display that’s connected to the docking station.
Use Mac OS to configure a display device
If you’re using a computer that’s running a version of Mac OS, you can adjust a display
device in the Displays section of the Mac System Preferences menu.
Use Mac OS to change the display mode
By default, the docking station will be set up as an extended display.
•
Do one of the following:
•
•
•
To change the display to Mirror mode, on the Arrangement screen on a
display, select the Mirror Display check box.
To change the display to Extend mode, on the Arrangement screen on a
display, clear the Mirror Display check box.
To use Extended and Mirror modes simultaneously, clear the Mirror Display
check box. On the Arrangement screen, press and hold Cmd + Alt, and then
drag and drop the display that you want to mirror over the primary display
(indicated with a white bar). Repeat this step for all of the displays that you
want to mirror.
Use Mac OS to change the primary display
Changing the primary display affects where new windows appear.
•
To change which of the connected displays is the primary display, on the current
primary display, click the white menu bar and drag it to the display that you wish to
make the primary one.
Instruction Manual
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported video resolutions
The docking station supports approximately 4K video resolutions on DisplayPort 1
video output.
4K (3840x2160) resolutions can be achieved if the connected DisplayPort display offers
4K support.
See the video resolution chart below for specific configurations and supported
resolutions:
Max DisplayPort
Resolution –
Port 1
Max DisplayPort
Resolution –
Port 2
Max HDMI
Resolution
Video Output
3840x2160p (4K)
2560x1600p
DisplayPort 1 Only
(Single Display)
N/A
N/A
2560x1440p
DisplayPort 2 Only
(Single Display)
N/A
N/A
2560x1600p
N/A
N/A
HDMI Only (Single
Display)
2560x1440p
DisplayPort 1
and HDMI (Two
Displays)
3840x2160p (4K)
N/A
N/A
2560x1440p
2048x1152p
N/A
DisplayPort 2
and HDMI (Two
Displays)
2048x1152p
2560x1600p
DisplayPort 1 and
DisplayPort 2 (Two
Displays)
3840x2160p (4K)
All Displays
(DisplayPort 1,
DisplayPort 2,
HDMI)
3840x2160p (4K)
2048x1152p
2048x1152p
Note: Depending on the configuration and the supported resolutions of your
connected monitors, the docking station may support video resolutions lower than
those specified above.
Instruction Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
officers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you find the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
Download from Www.Somanuals.com. All Manuals Search And Download.
|