Trayless SATA Drive Bay
5.25" Trayless SATA Hot Swap Drive Bay
HSB100SATBK
Instruction Manual
Actual product may vary from photo
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruction Manual
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruction Manual
Introduction
Thank you for purchasing a StarTech.com trayless SATA hard drive bay. Now, you can
enjoy a truly portable storage solution, with the ability to insert and remove a bare SATA
drive without having to mount it in a drive tray or drawer.
Features
• Innovative design requires no internal caddy, saving space and allowing better hard
disk heat dissipation
• 10000+ Insertion rating - drive tray is designed to withstand the friction created by
removing and re-inserting the drive tray more than 10000x
• Fits all 3.5” Serial ATA hard disk drives
• Internal rubber cushioning helps eliminate vibration and damage to the hard disk
Before You Begin
System Requirements
• An available 5.25” drive bay
• 3.5” SATA hard drive
Contents
• 5.25" Trayless SATA Hot Swap Drive Bay
• Manual
• Screws (4)
• Keys (2)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruction Manual
Installation
To ensure a quick and easy installation, please read through this section before
attempting to install this device.
WARNING: Hard drives require careful handling, especially when being transported. If
you are not careful with your hard disk, it may result in lost data. Always handle your
hard drive with caution.
WARNING: Hard drives, like all computer equipment can also be severely damaged by
static electricity. Be sure that you are properly grounded before opening your computer
case or touching any components. StarTech.com recommends that you wear an anti-
static strap when installing any computer equipment. If an anti-static strap is unavailable,
discharge yourself of any static electricity build-up by touching a large grounded metal
surface (such as the computer case) for several seconds.
WARNING: Do not bump, jar, or drop the device. Do not disconnect any cables or power
sources while the hard drive is active. This can result in data loss and possible damage
to the hard drive. Always make sure that your hard drive is fully spun down before
removing the device.
Installing the removable drive frame in the computer
1. Open your computer case. In most designs, the case is opened by removing two or
three screws at the rear of the case and then sliding the covering side panel backward
until it comes free. If your case is a tower style, ensure that you remove the panel that
will expose the top of the computer's motherboard. This is generally the left-side panel.
There are many different case designs, however, so if you are unsure of how to open
your particular case, consult the user manual for your case or contact your local
computer store for help.
2. Remove the cover of an empty drive bay.
3. Insert the drive frame into the bay through the empty slot, pushing inwards until the
screw holes from the frame are aligned with the holes provided by the drive bay.
4. Secure the frame in the drive bay by inserting and tightening the screws provided, into
the holes of the drive bay, and the newly inserted frame.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruction Manual
5. Connect the SATA power cable and the SATA data cables to the appropriate ports
provided on the back of the rear panel of the drive frame.
SATA Data and
power ports
Installing the hard drive into the drive frame
1. Pull the spring lock to open the front door.
2. Position the hard drive near the entry of the frame, with the label of the hard drive
facing up, and the rear panel of the hard drive aimed towards the inside of the
computer.
3. Gently push the drive into the frame until the locking arm begins to close.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruction Manual
4. Secure the drive in the frame by continuing to close the locking arm. Gently apply
pressure to the locking arm, until you hear the ‘click’ of the spring lock.
5. Optional: To lock the drive in the frame, insert the key provided into the keyhole at the
front of the drive bay. Turn the key 90° to the right, and remove the key.
Removing the hard drive from the drive frame
1. If you opted to lock the drive in place, insert the key into the keyhole. Turn the key 90°
to the left, and remove the key.
2. Gently, but firmly open the locking arm until it is out of the path of the hard drive
removal.
3. Once the locking arm is open, slowly pull the hard drive out of the frame.
4. Return the locking arm to the secured position.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruction Manual
Specifications
Form Factor
Serial ATA
Dimensions
184 x 149 x 42 (mm)
SATA, SATA II
Interface
Operating temperature
Insertion rating
0° - 55°C
10000 insertions/removals
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide
industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
Warranty Information
This product is backed by a one-year warranty. In addition, StarTech.com warrants its
products against defects in materials and workmanship for the periods noted, following
the initial date of purchase. During this period, the products may be returned for repair, or
replacement with equivalent products at our discretion. The warranty covers parts and
labor costs only. StarTech.com does not warrant its products from defects or damages
arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
officers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential
damages. If such laws apply, the limitations or exclusions contained in this statement
may not apply to you.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
About StarTech.com
StarTech.com is “The Professionals’ Source for Hard-to-Find Computer
Parts”. Since 1985, we have been providing IT professionals with the
quality products they need to complete their solutions. We offer an
unmatched selection of computer parts, cables, server management
solutions and A/V products and serve a worldwide market through our
locations in the United States, Canada, the United Kingdom and Taiwan.
and to access exclusive interactive tools such as the Parts Finder and the
KVM Reference Guide. StarTech.com makes it easy to complete almost
any IT solution. Find out for yourself why our products lead the industry in
performance, support, and value.
Revised: 27 September 2006 (Rev. A)
Download from Www.Somanuals.com. All Manuals Search And Download.
|