PEXESAT32
PEXSAT32
Instruction Manual
PCI Express Serial ATA
Adapter Card
2-Port SATA 6Gbps PCI Express
eSATA Controller Card
2-Port SATA 6Gbps PCI Express
SATA Controller Card
Manual Revision:07/12/2010
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction..................................................................... 1
Packaging Contents.....................................................................1
System Requirements.................................................................1
PEXESAT32 View........................................................................2
PEXSAT32 View ..........................................................................2
Installation....................................................................... 3
Hardware Installation...................................................................3
Driver Installation.........................................................................4
Verifying Installation.....................................................................5
How to Use ...................................................................... 6
RAID Configuration......................................................................6
Specifications.................................................................. 7
Technical Support........................................................... 8
Warranty Information...................................................... 8
Download from Www.Somanuals.com. All Manuals Search And Download.
i
Introduction
The StarTech.com 2-Port PCI Express 6Gbps eSATA or SATA
Controller Cards offers simple connectivity between a host computer
system and eSATA or SATA revision 3.0 devices. A cost-effective
solution for connecting high RPM hard drives and Solid State Drives
(SSD), which in turn allows for easier data backups and archiving. With
full support for SATA revision 3.0 hard drives and data transfer speeds
of up to 6 Gbps, as well as backwards support for SATA revision 2.0
(3.0 Gbps) devices, the adapter card features a native PCI Express
single chip design that provides enhanced compatibility, reliability and
performance.
Packaging Contents
• 1 x PEXESAT32 controller card
or
1 x PEXSATA32 controller card
• 1 x Low Profile bracket
• 1 x Driver Installation CD
• 1 x Instruction Manual
System Requirements
• PCI Express enabled computer system with available slot
• Microsoft® Windows® XP/Server 2003/Vista/Server 2008 R2/7
(32/64-bit), or Linux®
Download from Www.Somanuals.com. All Manuals Search And Download.
1
PEXESAT32 View
PEXSAT32 View
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Installation
WARNING! PCI Express cards, like all computer equipment, can be
severely damaged by static electricity. Be sure that you are properly
grounded before opening your computer case or touching your PCI
Express card. StarTech.com recommends that you wear an anti-static
strap when installing any computer component. If an anti-static strap
is unavailable, discharge yourself of any static electricity build-up by
touching a large grounded metal surface (such as the computer case)
for several seconds. Also be careful to handle the PCI Express card by
its edges and not the gold connectors.
Hardware Installation
1. Turn your computer off and any peripherals connected to the
computer (i.e. Printers, external hard drives, etc.). Unplug the power
cable from the rear of the power supply on the back of the computer.
2. Remove the cover from the computer case. See documentation for
your computer system for details.
3. Locate an open PCI Express slot and remove the metal cover plate
on the rear of the computer case (Refer to documentation for your
computer system for details.). Note that this card will work in PCI
Express slots of additional lanes (i.e. x4, x8 or x16 slots).
OPTIONAL: if installing the card into a low profile system, remove the
full height bracket on the card and replace with the included low profile
bracket.
4. Insert the card into the open PCI Express slot and fasten the bracket
to the rear of the case.
OPTIONAL: if connecting external LED indicators to the card, connect
the 2x4-pin header on the card to the LEDs.
5. Place the cover back onto the computer case.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
6. Insert the power cable into the socket on the power supply and
reconnect all other connectors removed in Step 1.
Driver Installation
Windows XP/Server 2003/Vista/Server 2008 R2
1. After installing the card into the computer system, boot up the
computer.
2. Once logged into Windows, the Hardware/Driver installation wizard
should appear. Insert the Driver Installation CD into the CD/DVD
drive when prompted.
3. Windows should automatically start to search the CD for the
appropriate drivers. This may take several minutes.
4. Once Windows has located the drivers and installed them, the card
should be ready for use.
Windows 7
No driver installation is required for Windows 7, as the controller card is
natively supported, so the drivers are already installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Verifying Installation
Windows XP/Server 2003/Vista/Server 2008 R2/7
From the main desktop, right-click on “My Computer” (“Computer”
in Vista or later), then select “Manage”. In the new Computer
Management window, select Device Manager from the left window
panel.
Under the “SCSI and RAID Controllers” category (“Storage Controllers”
in Vista or later), should be a “Marvell 91xx” device. Right-click on the
device and select “Properties” to make sure it is installed and working
correctly.
For Windows 7, if using the native drivers, the card will instead be listed
under the “IDE ATA/ATAPI Controller” category as a “Standard AHCI”
device.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
How to Use
RAID Configuration
To setup a RAID array using the drives connected to the SATA
controller card, the BIOS level configuration menu must be accessed.
To access the configuration menu, during POST (computer startup),
the status display for the controller card will display. When prompted,
pressing [CTRL] + [m] will enter the configuration menu. From the
configuration menu, the detected drives can be configured into any of
the supported RAID modes by following the on screen prompts.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Specifications
PCI Express rev 2.0*
(x1 connector)
Bus Interface
SATA rev 3.0
2 x 7-pin eSATA (PEXESAT32)
2 x 7-pin SATA (PEXSAT32)
Marvell 9128
Connectors
Chipset ID
Maximum Data Transfer Rate
RAID Support
SATA: 6Gbps
0, 1, JBOD (single)
Operating Temperature
Storage Temperature
Humidity
5°C ~ 50°C (41°F ~ 122°F)
-25°C ~ 70°C (-13°F ~ 158°F)
15 ~ 90% RH
Windows XP/Server 2003/Vista/
Server 2008 R2/7 (32/64-bit),
Linux
Compatible Operating
Systems
* PCI Express 2.0 compliant card slots support 5 Gbps transfer rates, while PCI Express 1.x
card slots only support 2.5 Gbps.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Technical Support
StarTech.com’s lifetime technical support is an integral part of our
commitment to provide industry-leading solutions. If you ever need
our comprehensive selection of online tools, documentation, and
downloads.
Warranty Information
This product is backed by a lifetime warranty.
In addition, StarTech.com warrants its products against defects in
materials and workmanship for the periods noted, following the initial
date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion.
The warranty covers parts and labor costs only. StarTech.com does
not warrant its products from defects or damages arising from misuse,
abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA
LLP (or their officers, directors, employees or agents) for any damages
(whether direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid
for the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
StarTech.com has been making “hard-to-find easy” since 1985,
providing high quality solutions to a diverse IT and A/V customer
base that spans many channels, including government, education
and industrial facilities to name just a few. We offer an unmatched
selection of computer parts, cables, A/V products, KVM and Server
Management solutions, serving a worldwide market through our
locations in the United States, Canada, the United Kingdom and
Taiwan.
our products and to access exclusive interactive tools such as the
Cable Finder, Parts Finder and the KVM Reference Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
|