PRESENTER UNIT
PR921-24-A
SPECIFICATION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1. GENERAL DESCRIPTION ................................................................................................................ 1
1.1
Model Name Display Directions ............................................................................................. 1
2. PRINTER CONFIGURATION ........................................................................................................... 2
3. PAPER SPECIFICATIONS (HEAT SENSITIVE PAPER)............................................................. 3
4. PRESENTER SPECIFICATIONS...................................................................................................... 4
4.1
4.2
4.3
4.4
4.5
Basic Operations ...................................................................................................................... 4
Operating Sequence ................................................................................................................. 4
Paper Detector General Specifications .................................................................................... 8
Presenter Motor General Specifications .................................................................................. 9
Connector ............................................................................................................................... 10
5. EXTERNAL SPECIFICATIONS ..................................................................................................... 12
6. AMBIENT SPECIFICATIONS......................................................................................................... 15
7. RELIABILITY SPECIFICATIONS ................................................................................................. 16
8. SETTING PAPER............................................................................................................................... 17
8.1
8.2
Setting Paper .......................................................................................................................... 17
Using the Accessories (Weight Shaft and Loop Guide) ........................................................ 18
9. RECOVERING FROM ERRORS (PAPER JAMS) ....................................................................... 21
10.PRECAUTIONS REGARDING OUTER COVER DESIGNS ...................................................... 23
11.MAINTENANCE ................................................................................................................................ 25
12.OTHER PRECAUTIONS .................................................................................................................. 26
12.1 Precautions in Handling ......................................................................................................... 26
12.2 Precautions Relating to Safty ................................................................................................. 26
Download from Www.Somanuals.com. All Manuals Search And Download.
1. GENERAL DESCRIPTION
The PR921 is a paper (receipts, etc.) discharging device that uses a built-in thermal printer system employed
in electronic devices such as game machines, ATM and unmanned information kiosk terminals, etc.
This model carries a paper (receipts, etc.) recovery function after discharge, as a standard.
1.1 Model Name Display Directions
P R 9 2 1 - 2 4 - A
1
2
3
4
5
6
1
PR : Presenter
9 : 900 Series
2
3
4
5
6
2 : No cutter, horizontal discharge
1 : Standard (Used with TMP)
24 : DC 24 V Specifications
A : Sold Separately
– 1 –
Download from Www.Somanuals.com. All Manuals Search And Download.
2. PRINTER CONFIGURATION
The presenter mechanism is composed of the following devices.
Presenter Mechanism
Drive Unit
Detector
PF Roller
Paper Detector 1 (Reflective Photo-interrupter)
Paper Detector 2 (Reflective Photo-interrupter)
Paper Detector 3 (Reflective Photo-interrupter)
– 2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
3. PAPER SPECIFICATIONS (HEAT SENSITIVE PAPER)
±
±
(1) Paper Width : 79.5 0.5 mm to 111.5 0.5 mm
(2) Allowable Sheet Length : 75 to 300 mm
(3) Recommended Heat Sensitive Paper : According to product specifications for TMP942-24-A.
(4) Paper Thickness : 0.065 mm to 0.150 mm
(5) Shaft Core Diameter : When paper thickness is Min. 0.065 mm to 0.10 mm
Shaft core inner diameter: Min. 25.4 ±1 mm;
Shaft core outer diameter: Min. 31.4 ±1 mm
When paper thickness is Min. 0.10 mm to 0.15 mm
Shaft core inner diameter: Min. 50.8 ±1 mm;
Shaft core outer diameter: Min. 56.8 ±1 mm
(6) Paper Curl Direction : Set the paper so that the printing side is facing the outside when taken up
on the roll.
Note 1: Paper jams can occur if paper outside of the specifications describe above is use.
(7) Non-printing Region on Back Side :
25 mm
Center of presenter paper discharge outlet
10 mm
The front side of the
paper is the printing surface.
Paper discharge direction
Paper back side
Non-printing region (Back side)
79 mm
(Minimum paper width)
112 mm
(Maximum paper width)
Note 2: When using paper outside of the specifications describe above, the paper
detector(sensor) may mis-detect the paper or may not detect the paper at all.
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
4. PRESENTER SPECIFICATIONS
4.1 Basic Operations
a. Paper is not discharged from the printer while printing.
b. After printing is completed, the presenter roller rotates to discharge the paper.
c. The roller stops when the detector has detected the trailing edge of the paper.
(Paper discharge completed)
d. The next print job can be started by the user removing the paper from the printer.
e. The recovery command or a timer can be used to recover the paper if it is not removed.
4.2 Operating Sequence
Presenter Inlet
Sensor 1
Paper Feed Direction
Presenter Outlet
Recovery
Direction
Sensor 3 Sensor 2
PF Roller
Sensor 1: Sensor for detecting leading edge and trailing edge of paper.
Sensor 2: Sensor for detecting leading edge of paper.
Sensor 3: Sensor for determining recovery
(63.6 mm)
7.8 mm
4.9 mm
30. 6 mm
13.1 mm
7.2 mm
Paper Position
Sensor 2
Sensor 3
Presenter Outlet
Sensor 1
Presenter Inlet
PF Roller
– 4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
(1) Paper is discharged and the trailing edge of the paper is stopped in front of the PF roller.
Presenter Inlet
Presenter Outlet
Paper Position
200 ms
CW
DC Motor
2
4
CCW
Terminal Shorted and
Motor Stopped
ON
Sensor 1
1
OFF
ON
Sensor 2
OFF
3
Sensor 3
No Discrimination
1 Sensor 1 detects leading edge of paper and sensor 1 turns ON.
2 Sensor 1 turns ON, DC motor starts rotating clockwise.
3 Sensor 2 detects leading edge of paper and sensor 2 turns ON.
4 Sensor 2 turns ON, DC motor is braked for 200 ms and stopped.
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
(2) Paper Discharge Until Paper Trailing Edge is Stopped Before PF Roller
Presenter Inlet
Presenter Outlet
Paper Position
200 ms
CW
5
8
DC Motor
CCW
Terminal Shorted and
Motor Stopped
7
ON
6
Sensor 1
OFF
ON
Sensor 2
OFF
Sensor 3
No Discrimination
5 DC motor rotates clockwise by the paper discharge instruction.
6 Sensor 1 detects trailing edge of paper and sensor 1 turns OFF.
7 Sensor 1 turns OFF, paper is fed 1.2 mm.
8 After feeding paper 1.2 mm, DC motor is braked for 200 ms and stopped.
Note:
The amount of time required for feeding paper 1.2 mm in step 7, above, is logically 4 ms
with a paper discharge speed of 300 m/s.
– 6 –
Download from Www.Somanuals.com. All Manuals Search And Download.
(3) Paper Recovery Operation
If the sensor 2 and sensor 3 detection signals are ON after a determined amount of time has passed,
the paper recovery operation is performed.
Presenter Outlet
Presenter Inlet
Paper Position
1 s
200 ms
CW
DC Motor
9
12
CCW
Terminal Shorted and
Motor Stopped
ON
Sensor 1
OFF
ON
11
Sensor 2
OFF
ON
10
Sensor 3
OFF
26 ms
Sensor 3 turns OFF, then, if sensor 2 turns OFF,
it is determined that the paper has been
recovered. Under all other conditions, it is
considered that paper has been pulled out.
9 DC motor rotates counterclockwise by the paper recovery instruction.
0 Sensor 3 detects trailing edge of paper and sensor 3 turns OFF.
A Sensor 2 detects trailing edge of paper and sensor 3 turns OFF.
B 1 second after sensor 2 turns OFF, DC motor is braked for 200 ms and stopped.
Note:
The distance between sensor 2 and sensor 3 is 7.8 mm. Therefore, the amount of time
required for sensor 2 to turn OFF after sensor 3 turns OFF is 26 ms. It is necessary to
enable detection in that amount of time.
– 7 –
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 Paper Detector General Specifications
The paper detector is composed of a reflective sensor and generates a set/reset signal.
Absolute Maximum Rating (at 25°C)
Items
Reverse Voltage
Symbol
VR
Rating
Units
V
6
Forward Current
IF
50
mA
mW
V
Tolerance Loss
PD
75
35
Voltage Between Collector - Emulator
Collector Current
VCE0
IC
20
mA
mW
mW
°C
Collector Loss
PC
75
Total Tolerance Loss
Operating Temperature
Storage Temperature
* Soldering Temperature
* Soldering Time: Within 5 seconds
Ptot
Topt
Tstg
Tsol
100
-25 to +85
-40 to +100
260
°C
°C
Electrical Characteristics (at 25°C)
Item
Symbol
VF
Conditions
MIN
TYP
1.2
MAX
Units
V
Forward Voltage
Reverse Current
IF = 20 mA
VR = 3 V
1.4
10
IR
µm
Dark Current
ICEO VCE = 20 V
1
100
nA
Optical Current
IC
IF =20 mA, VCE =5V
1.0
3.0
500
150
150
mA
nA
µs
* 1 Leaked Current
Response Time (Rise)
Ileak IF =20 mA, VCE = 5V
VCE=2V, IC=100 µA
RL =1000Ω,D =4mm
(*2)
tr
tf
50
50
Response Time (Fall)
µs
*1: No reflective material.
*2: D is the thickness of the reflective mirror glass.
– 8 –
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 Presenter Motor General Specifications
Model:
Mabuchi Motor FK-180SH
24.0 V
Rated Voltage:
Voltage Range for Use: 21.6 V to 26.4 V (24.0 V ±10%)
Peak Current:
Approximately 1.0 A (24 VDC, 25°C)
Average Current:
Approximately 0.2 A (24 VDC, 25°C, including at startup.)
Current (A)
Time (T)
Usage Temperature Range: -15°C to +60°C
No Load Current:
Max. 30 mA
±
No Load Revolutions:
Rated Load Current:
Rated Load Revolutions:
Direction of Rotation:
6600 850 rpm
Max. 110 mA
±
5000 650 rpm
At Discharge: CW (Clockwise direction when looking from the motor output
shaft.)
At Recovery: CCW (Counterclockwise when looking from the motor
outputshaft.)
DC Motor Drive
Speed Control:
Drive and Control: Voltage (24.0 V) is applied to the DC motor when stopped to start it.
Brake Control: Stops by shorting terminals. Shorting time is 200 ms.
None
Paper Discharge Speed: 300 mm/sec
Note 1: The above paper discharge speed reflects the value for recommended paper (thickness
of 65 mm) and a receipt length of 75 mm.
Note 2: The above paper discharge speed varies according to the environment of use (tempera-
ture, humidity, power voltage fluctuations, etc.).
– 9 –
Download from Www.Somanuals.com. All Manuals Search And Download.
4.5 Connector
4.5.1 Paper Detector and Motor
Connector 2
Connector 2
Presenter Intermediate Board
Pin #8: GND
Black
8
8
7
6
5
8
7
6
5
Pin #7: Sensor 3
+
Black
Black
Black
Black
Black
Black
White
Detection signal
7
6
5
DC Motor
Pin #6: Motor(+)
-
Pin #5: Motor(
-)
330 Ω
330 Ω
330 Ω
Sensor PCB
Sensor 3
Pin #4: Sensor 2
Detection signal
4
4
3
2
1
4
3
2
1
Pin #3: GND
3
2
1
GP2S40J
Pin #2: Sensor 1
Detection signal
Sensor PCB
Sensor 2
Pin #1: +3.3 V
GP2S40J
350 mm
Sensor PCB
Sensor 1
Connector 1
GP2S40J
Connector No.
Connector 1
Connector 2
Manufacturer and Model No.
Corresponding Connectors
JST S 8B-PH-K-S (Side Type) JST PHR-8 (Housing)
JST PHR-8 (Housing) JST S 8B - PH - K - S (Side Type)
(Post standard with base)
JST B 8B - PH - K - S (Top Type)
(Post standard with base)
JST S 8B - PH - KL (Side Type)
(Post low check type with base)
JST B 8B - PH - KL (Top Type)
(Post low check type with base)
JST S 8B - PH - SM2 - TB (Side Type)
(Post with surface mount type base:with support bracket)
JST B 8B - PH - SM2 - TB (Top Type)
(Post with surface mount type base: withsupport bracket)
– 10 –
Download from Www.Somanuals.com. All Manuals Search And Download.
4.5.2 Example Circuit
B8B-PH-K-S
7
TA8428K
3
HS601
1
VDD: 3.3V
+
VCC
VCC
47U_35V
1
2
5
6
PRM1
PRM2
IN1 OUTA
IN2 OUTB
M
-
6
M+
GND
4
8
2
4
7
GND
SIG 1
SIG 2
SIG 3
10K
VDD: 3.3V
M-GND
HS601
0R
4.7K
3
PRS0
GND
R
R
R
VDD: 3.3V
4.7K
PRS1ADJ
VDD: 3.3V
10K
M-GND
HA1 7339
VDD: 3.3V
3
-
+
2
68K
C
PRS1
0.1U
1
12
2
10K
10K
10K
0R
0R
0R
VDD: 3.3V
VR_4.7K
GND
0.022U
3
4.7K
GND
GND
GND
GND
GND
VDD: 3.3V
4.7K
PRS2ADJ
10K
HA1 7339
VDD: 3.3V
1
-
+
68K
C
PRS2
0.1U
1
2
VDD: 3.3V
VR_4.7K
GND
3
4.7K
GND
VDD: 3.3V
4.7K
PRS3ADJ
10K
HA1 7339
VDD: 3.3V
14
-
+
68K
C
PRS3
0.1U
1
2
VDD: 3.3V
VR_4.7K
GND
3
4.7K
GND
Note:
Parts marked with an asterisk are not mounted.
– 11 –
Download from Www.Somanuals.com. All Manuals Search And Download.
5. EXTERNAL SPECIFICATIONS
(1) External Dimensions
See Figure 5-1
(2) Weight:
285 ±10g (Excluding peripheral devices)
(3) External View
See Figure 5-2
– 12 –
Download from Www.Somanuals.com. All Manuals Search And Download.
✵✶✲✹
✼
✹✻
✻✹
✻
Unit: mm
Figure 5-1
– 13 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 5-2
– 14 –
Download from Www.Somanuals.com. All Manuals Search And Download.
6. AMBIENT SPECIFICATIONS
(1) During Operation
Ambient Test (For Evaluation)
Room Temperature :
23°C at 50% RH
High Temperature :
50°C
High Temperature/High Humidity : 37°C at 85% RH
Low Temperature :
Specifications
Temperature :
Humidity :
0°C
0°C to 50°C
10% to 80% RH (No condensation)
However, 80% RH assumes 34°C.
(2) At Storage
Storage Test (At Evaluation)
High Temperature Storage :
Low Temperature Storage :
Humidity at Storage :
Specifications
60°C at 96 Hr
-20°C at 96 Hr
40°C at 90% RH
Temperature :
-20°C to 60°C
Humidity :
10% to 90% (No condensation)
However, high temperature/high humidity of 40°C at 90%
(with no condensation) is considered the worst values.
– 15 –
Download from Www.Somanuals.com. All Manuals Search And Download.
7. RELIABILITY SPECIFICATIONS
(1) Life
Presentation System: 1 million times
Note 1: If not using our recommended paper type, reliability cannot be guaranteed. Therefore,
you should always use the recommended paper type.
Note 2: This reliability is guaranteed for receipt lengths of 100 mm or less.
(2) Vibrations/Shocks from Drops (In the order of drop, vibrations)
1 Drop Shock Test
Height of Drop :
1 angle, 3 corners: 85 cm
6 surfaces: 100 cm
Direction of Drop :
Number of Drops :
Packing Status :
1 angle; 3 corners; 6 surfaces
Once each time (total of 10 drops)
Minimum Packing Status
2 Vibration Test
Direction of Vibration :
Vibration Frequency :
Sweep Time :
XYZ
10 Hz to 55 Hz to 10 Hz
1 minute
Vibration Acceleration Speed : 0.3 to 9.3 G
Charging Time :
Packing Status :
Total Vibrations :
One Direction Two Hours (Total Six Hours)
Minimum Packing Status
Constant at 1.54 mm
– 16 –
Download from Www.Somanuals.com. All Manuals Search And Download.
8. SETTING PAPER AND USING THE ACCESSORIES
8.1 Setting Paper (See Figure 8-1)
1) Cut the leading edge of paper to be set straight across the end.
2) Insert the paper straight along the paper mounted thermal mechanism and between the presenter paper
guide and paper holder.
±0.5 mm
111.5
±0.5 mm
79.5
Paper Holder
Paper Guide
Paper Eject Direction
Figure 8-1
– 17 –
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2 Using the Accessories (Weight Shaft and Loop Guide)
• Paper thickness: Min. 0.065 to Max. 0.10 mm. (See Figure 8-2)
1) No shaft is used so fasten the 3 hooks in the 3 positions on the rear guide so that they do not get lost.
2) Fasten the loop cutter to the cutter with the 2 accessory screws.
1. Position the loop guide and cutter in positioners 1 and 2.
2. Tighten the screw next to the positioner 1.
3. While pulling the next loop guide in the direction of the arrow, tighten the screw next to the
positioner 2 so that it does not flow therebetween the cutter (see Fig. 8-3)
1
2
Paper Holder
3
Hook
Hook
Screw TAT 3-6 CT-FL
Shaft
Rear Guide
Hook
Screw TAT 3-6 CT-FL
Cutter
Loop Guide
Positioner 2
Positioner 1
Figure 8-2
– 18 –
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Rotate the paper holder and set after checking that it does not interfere with the loop guide.
Note:
Floating therebetween the cutter can occur because of deformation in the loop guide
caused by sudden environmental changes. (See fig. 8-3) If that should occur, follow the
directions above for the mounting of the loop guide and remount it so that it does not
float.
[ If Floating Occurs Between the Loop Guide and Cutter ]
Cutter
Loop Guide
Figure 8-3
– 19 –
Download from Www.Somanuals.com. All Manuals Search And Download.
• Paper thickness: Min. 0.10 to Max. 0.15 mm. (See Figure 8-4)
1) Fasten the shaft with the left and right hooks positioned on the Paper Holder.
2) Check that the shaft is securely fastened to the Paper Holder hooks to set it.
Note 1: The 2 positions of the Paper Holder should be adjusted for the thickness of the record-
ing paper, the length thereof and the environment of use.
Note 2: The loop guide is not used, so store it so that it will not get lost.
Paper Holder
1
Hook
Hook
Shaft
2
3
Figure 8-4
– 20 –
Download from Www.Somanuals.com. All Manuals Search And Download.
9. RECOVERING FROM ERRORS (PAPER JAMS)
Remove jammed paper according to the directions shown in Figure 9-1 and 9-2 to recover from non-recov-
erable paper jams. When doing so, always verify that the power has been turned OFF.
(Procedure 1)
1) Rotate the knob in the clockwise or counterclockwise direction.
2) Remove the jammed sheet from where it is easiest to remove.
(Paper inlet, discharge outlet, of the lower recovery space)
Jammed Paper
Inlet
Rotate
Discharge Outlet
Remove jammed paper
from the lower space.
Knob
Figure 9-1
– 21 –
Download from Www.Somanuals.com. All Manuals Search And Download.
(Procedure 2: When Paper Cannot be Removed with Procedure 1)
1) Remove the screws on both sides of the presenter, shown in the figure below.
2) Rotate the rear guide and remove the jammed paper.
3) After removing the jammed paper, reverse the procedure 2), then fasten the screws in their original
positions.
Note:
When fastening the screws in procedure 3), be careful not to pinch the wires shown in
the figure below.
Rear Guide
Rear Guide
Rotate
Rotate
Wires
Screw: TAT 2.6 FC-06.0 FP
Screw: TAT 2.6 FC-06.0 FP
Left side
Right side
Figure 9-2
– 22 –
Download from Www.Somanuals.com. All Manuals Search And Download.
10. PRECAUTIONS REGARDING OUTER COVER DESIGNS
To prevent jams at the presenter discharge outlet, consider designing the casing so that recording paper does
not enter between the presenter unit and the case.
1 Gap of *1 must be a maximum of 1 mm. (See Figure 10-1)
2 The dimensions of *2 must be larger than the presenter discharge outlet (2 mm), but it should be
small enough that it does not block the paper discharge outlet.(See Figure 10-1) If it is too large,
interfering light (from the sun, etc.) will enter from outside of the apparatus from the recording
paper outlet causing the paper detectors (sensors) to mis-operate, so do not make them too large.
1) The casing for the recording paper discharge outlet should have an outlet portion established such as
*3 so that coins and clips do not fall into the casing. (See Figure 10-1)
2) Storage space for the recovery of recording paper should consider the length of the recording paper
and degree of curling to all plenty of space. It is recommended to ensure approximately 100 mm or
more space for storage depth. (See Figure 10-2)
Case
Presenter
3
*
1
*
Figure 10-1
– 23 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Mechanism
Presenter
Storage Space
Depth: Max. Approx. 100 mm
Figure 10-2
– 24 –
Download from Www.Somanuals.com. All Manuals Search And Download.
11. MAINTENANCE
Perform the following maintenance periodically.
Maintenance Periods:
Every six months or after a million lines of printing.
Location of Maintenance: Each detector and the vicinity
Content of Maintenance: Clean away and paper dust or dirt and dust adhering to the detectors in the
presenter.
Note 1:
Note 2:
Always verify that the power supply has been turned OFF when performing maintenance on
the presenter.
Remove the two screws on both sides of the presenter, as shown in Figure 11, and rotate the
rear guide upward to remove any dust and dirt on the paper detector in the presenter. After
performing maintenance, return the rear guide to its original status and tighten the screws.
When doing so, do not allow the screws to catch on the wires in the Figure 11.
Screw: TAT 2.6 FC-06.0 FP
Screw: TAT 2.6 FC-06.0 FP
Wire
Rear Guide
Rear Guide
Rotate
Rotate
Paper Detector
Left side
Right side
Figure 11-1
– 25 –
Download from Www.Somanuals.com. All Manuals Search And Download.
12. HANDLING THE PRESENTER
12.1 Precautions in Handling
1) Do not store or use the printer in locations that are dusty, oily or exposed to metallic dust.
2) Do not apply an unreasonable amount of force on the body.
(This can disfigure the frame and lead to the printer not functioning properly.)
3) Avoid sudden changes even if the ambient temperature and humidity are within standard conditions.
Allow the printer to sit in its new environment for at least 30 minutes before use in the event there has
been a sudden change.
4) Do not use the printer in an environment where condensation has formed. If condensation should form,
absolutely never turn ON the power until the condensation has dried.
5) The setup angle for the presenter should be a maximum of ±5°, as shown in Figure 12.
6) Paper transport and life cannot be guaranteed when using recording paper other than what is recom-
mended.
7) Be careful not to allow foreign matter to adhere to the recording paper.
8) Be careful not to apply an excess amount of force on the cable connectors.
9) When closing the presenter from an open state, verify that the presenter is securely locked before oper-
ating.
12.2 Precautions Relating to Safety
1) After operation is completed, the surface of the motor can be very hot, so be careful never to touch it
directly with your bare hands.
2) When the presenter is operating, never touch the rotating members, such as the gears.
3) Handle the presenter engine (the metallic portions) carefully because they can cause serious injury.
4) To perform maintenance on the presenter, always verify that the power supply has been turned OFF.
– 26 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 12
– 27 –
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRONIC PRODUCTS DIVISION
STAR MICRONICS CO., LTD.
536 Nanatsushinya,
Shimizu, Shizuoka, 424-0066 Japan
Tel : 0543-47-0112
OVERSEAS SUBSIDIARY COMPANIES
STAR MICRONICS AMERICA, INC.
1150 King Georges Post Road, Edison,
NJ 08837-3729 U.S.A.
STAR MICRONICS U.K. LTD.
Star House, Peregrine Business
Park, Gomm Road, High Wycombe,
Bucks, HP13 7DL, U.K.
Tel : 732-623-5555
Tel : 01494-471111
Fax: 0543-48-5013
Fax: 732-623-5590
Fax: 01494-473333
Please access the following URL
for the lastest revision of the manual.
Distributed by
REV. 0.01 2002.11.10
Printed in Japan, 80874475
Download from Www.Somanuals.com. All Manuals Search And Download.
|