RM.406
Professional DJ Mixer
:
:
:
L
R
A
B
A
B
A
B
A
B
OWNER’S MANUAL
STANTON MAGNETICS, Inc.
©2004 Stanton Magnetics, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Congratulations and thank-you for purchasing the latest addition to the grow-
ing Stanton family. Sporting a new attitude, and a fresh, modern look, the
RM.406 is a 4-channel, rackmount mixer loaded with features and innova-
tions giving club and mobile DJs a complete, powerful, yet simple tool to mix,
create, and perform their best. 1/4" and 1/8" headphone outputs, XLR, RCA,
and 1/4" Master and Zone outputs, plus plenty of inputs, including three Mic
inputs, and a separate 1/8" jack for connecting portable devices such as
iPodsTM, ensure the utmost in flexibility. The RM.406 even goes a step further
by adding an FX Loop, Booth, and Subwoofer outputs. Colored, backlit
knobs, adjustable Crossfader curve, separate LED level indicators, gain and
3-band EQs on every channel with a fully assignable Crossfader, offer
increased control and functionality. Thoughtfully designed and engineered to
give you the most intuitive and instinctual experience possible, the RM.406
delivers all these features in a logical layout with quality components, all at
an affordable price.
Stanton's revolutionary Superior Sound Technology (SST™) also gives the
RM.406 exceptional sound quality with audio specifications rivaling mixers
costing up to four times as much. Developed from the ground up by a team
of seasoned audio professionals who have designed world class profession-
al recording studio and broadcast mixers, working hand in hand with experi-
enced and respected DJs, SST™ delivers a dynamic range better than 110
dB through ultra low-noise circuitry with a lower total harmonic distortion
(THD) than other mixers in its class. Glass epoxy PC boards, surface mount
technology, and faders that don't bleed add to the superior construction stan-
dards. This equates to a cleaner, more transparent sound, allowing your
music to be heard the way it was meant to. We’re proud to bring you the new
look, feel and sound of Stanton.
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.406 Top Panel (FUNCTIONS)
The controls and functions of the RM.406 are grouped in alphabetical sec-
tions (clockwise from upper right corner) for your reference and then listed
numerically for more detail.
G
H
:
:
:
A
B
C
L
R
A
B
A
B
A
B
A
B
D
F
E
Section A:
Section B:
Section C:
Section D:
Section E:
Section F:
Output Meters
FX Controls
Output Controls
Cue Controls
Crossfader Controls
MP3 / Aux In
Section G:
Section H:
Mic Controls
Channel Controls
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.406 Top Panel (FUNCTIONS)
Section A: Output Meters
1
2
A
1. Meter Switch: Switches the display of the Level Meter (#2) between
Master or Zone output signals.
2. Level Meter: Displays the left and right Master or Zone output level of the
mixer. Red indicates clipping.
Section B: FX Controls
3
4
5
B
3. Send Level: Controls the output level (send volume) of the FX Loop when
a channel’s effects send (#40) is activated.
4. Return Level: Controls the input level (return volume) of the FX Loop when
a channel’s effects send (#40) is activated [external effects processor
required.]
5. FX Return: Toggles the effects loop ON / OFF. When on, the signal sent
and returned through the FX Loop will be audible through the Master Output.
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.406 Top Panel (FUNCTIONS)
Section C: Output Controls
6
7
8
C
L
R
11
10
9
6. Master Level: Controls the overall output level of the audio signal sent
through the Master connectors (see Output Connections.)
7. Stereo/Mono Switch: Switches the Master output between a stereo or
mono signal. Mono mode can be used to accommodate some large PA sys-
tems. It can also be engaged in the event of a sudden loss of stereo
signal in phonograph cartridge connections [Stereo = UP position.]
8. Zone Level: Controls the output level of the audio signal sent through the
Zone connectors (see Output Connections.)
9. Booth Level: Controls the output level of the audio signal sent through the
Booth Output connectors (see Output Connections.)
10. Master Pan: Controls left/right signal balance of the Master Output (#6.)
11. Crossover LED: When lit, this indicates that the Crossover is active (for
setting the Crossover see Output Connections.)
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.406 Top Panel (FUNCTIONS)
Section D: Cue Controls
12
13
14
D
17
16
15
12. Cue FX: Sends the effected signal from the FX Loop to the Headphone Cue for
monitoring (see Section-B.) This allows DJs to hear what the FX Loop sounds like,
before sending it to the Master Outputs.
13. Split Cue: Controls how the CUE will be heard in the headphones. In the "stereo"
position, the pre-selected Cue (#41) will be heard as a stereo signal in the head-
phones (full stereo audio signal in both ears.) In "split" position, the pre-selected Cue
(#41) will be heard on one side of the headphones, while the Master Output (#6) sig-
nal is heard on the other side (different audio signals in each ear.)
14. Headphone Output 1: Connection for 1/4 inch headphone (phono-jack.)
Recommended headphone impedance is 32-200 ohms for maximum volume.
15. Headphone Output 2: Connection for 1/8 inch headphone (mini-jack.)
Recommended headphone impedance is 32-200 ohms for maximum volume.
16. Cue Level: Controls the overall headphone output level of both output jacks. It is
recommended headphones with an impedance rating of 200 ohms or less be used for
maximum volume.
17. Cue Pan: This controls the blend of audio signals that can be heard in the head-
phones. In the left-most “Cue” position, only channels selected by the Cue Assign
switches (#41) will be heard. In the right-most “Master” position, ony signals being
sent to the Master Output (#6) will be heard in the headphones. Any setting in-
between provides a mix of both Cue and Master signals. This gives DJs the flexibili-
ty to choose how they wish to monitor audio signals, based on personal preference
and technique.
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.406 Top Panel (FUNCTIONS)
Section E: Crossfader Controls
18
19
20
21
E
18. Fader Start (A): Activates this side (A) of the Crossfader (#19) for use with com-
ponents with the Fader Start feature. Moving the crossfader away from the left-most
position will cause the device (CD / Turntable) to start playing. This allows DJs to
activate a device by using the fader as if they were pressing Play. [Fader Start com-
patible device (CD / Turntable) is required. Fader Start cables need to be connect-
ed between the device and the appropriate input channel on the rear of the mixer.]
19. Crossfader: Controls the audio signal that is sent to the Outputs (Section C.)
When the Crossfader is in the left-most position (A), only the channel(s) set to (A)
on their Crossfader Assign switch (#43) will be sent to the Outputs. When the
Crossfader is in the right-most position (B), only the channel(s) set to (B) on their
Crossfader Assign switch (#43) will be sent to the Outputs. This allows DJs to fade
(mix) or cut (scratch) between different audio signals. When the Crossfader is
somewhere in between the two extremes, a “blend” or “mix” between two signals
occurs. [Note: if NO line channel(s) have been set to either A or B (using #43) then
the Crossfader is bypassed. Also, if the appropriate Channel Fader (Line Fader)
(#42) is set to zero, no sound will be output.]
20. Fader Start (B): Activates this side (B) of the Crossfader (#19) for use with com-
ponents with the Fader Start feature. Moving the crossfader away from the right-
most position will cause the device (CD / Turntable) to start playing. This allows DJs
to activate a device by using the fader as if they were pressing Play. [Fader Start
compatible device (CD / Turntable) is required. Fader Start cables need to be con-
nected between the device and the appropriate input channel on the rear of the
mixer.]
21. Crossfader Curve: Controls the shape of the Crossfader (#19) curve. When
the knob is turned all the way to the left “Fade” setting, the action of the Crossfader
becomes a long, smooth curve (used primarily for mixing or blending.) When the
knob is turned all the way to the right “Cut” setting, the action of the Crossfader
becomes an extremely sharp curve (used primarily for scratching and cutting.) TIP:
This is a gradual control knob, therefore DJs can place the fader where they want
the audio to increase and use this curve control to set (fine tune) the curve point and
the way the Crossfader responds to movement.
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.406 Top Panel (FUNCTIONS)
Section F: MP3/Aux In
22
F
22. MP3 / Aux. Input: This 1/8" Mini-jack (3.5 mm) input was designed for
easy access and connectivity to a variety of portable devices (portable MP3
/ mini-disc / CD players / iPods.) Use this input instead of having to re-wire
the back panel of the mixer or use adapters.
Section G: Mic Controls
G
23
24
26
25
27
28
29
30
31
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Section G: Mic Controls (continued)
23. Mic-1 XLR Input: Primary connection for a standard balanced (XLR)
microphone.
24. Mic-2 XLR Input: Secondary connection for a standard balanced (XLR)
microphone.
25. Mic-1 1/4" Input: Primary connection for a standard unbalanced (1/4")
microphone.
26. Mic-2 1/4" Input: Secondary connection for a standard unbalanced (1/4")
microphone.
27. Mic-1 Level: Controls the output level (volume) of Microphone 1 only.
28. Mic-2 Level: Controls the output level (volume) of Microphone 2 only.
29. Mic EQ (HIGH): Controls High frequency equalization for BOTH micro-
phones (+10/-10 dB.) [Note: Any changes made to EQ settings will affect the
overall output level of the microphones].
30. Mic EQ (MID): Controls Mid frequency equalization for BOTH micro-
phones (+10/-10 dB.) [Note: Any changes made to EQ settings will affect the
overall output level of the microphones].
31. Mic EQ (LOW): Controls Low frequency equalization for BOTH micro-
phones (+10/-10 dB.) [Note: Any changes made to EQ settings will affect the
overall output level of the microphones].
32. Send FX: Turns the FX send ON / OFF for all microphones, and routes
the Microphone signal to the FX Send bus (#3) (for use with external effects
processor / FX Loop.)
33. Mic Selector: Turns the mic(s) On or Off and activates the automatic
Talk-over circuit. When activated, the automatic talk-over circuit reduces the
music output allowing the mic to appear louder than the master audio signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.406 Top Panel (FUNCTIONS)
Section H: Channel Controls (each channel has its own controls which
are duplicated for channels 1-4)
H
34
35
36
37
38
39
40
41
42
43
A
B
34. Input selector switch: Selects phono or line input for the corresponding
channel. This is a three way switch allowing input from only one device at a
time (Phono or either of two Line level inputs (for connections in rear panel of
mixer, see Sections N-R.)
35. Channel EQ (HIGH): Controls High frequency equalization of correspon-
ding channel (+9/-64 dB.) [Note: -64dB = complete KILL of frequency. Any
changes made to EQ settings will affect the overall output level of this chan-
nel]
36. Channel Gain: Controls the input level (GAIN) of the corresponding
channel. This control is Pre-EQ. Gain levels will differ between various types
of devices (such as turntables or CD players) or different types of media. The
Channel Gain allows DJs to compensate for these differences in order to
maintain consistent sound levels between different pieces of music, as well
as consistency between the different mixer channels. Be aware that turning
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.406 Top Panel (FUNCTIONS)
Section H: Channel Controls (continued)
this setting too high may result in a loss of sound quality (distortion.) [Note:
For best results set this control in the number 7 (2 O'Clock) position for unity
gain. If further adjustment is needed, this is a good reference point.]
37. Channel EQ (MID): Controls Mid frequency equalization of correspon-
ding channel (+9/-64 dB.) [Note: -64dB = complete KILL of frequency. Any
changes made to EQ settings will affect the overall output level of this chan-
nel]
38. Channel Input Meter: Displays the input level of this channel. The input
level is determined by the Channel Gain controls (see #36.) Red indicates
clipping.
39. Channel EQ (LOW): Controls Low frequency equalization of correspon-
ding channel (+9/-64 dB.) [Note: -64dB = complete KILL of frequency. Any
changes made to EQ settings will affect the overall output level of this chan-
nel]
40. Send FX: Turns the effect send ON / OFF for this channel. This switch
routes the audio signal to the effects send bus (#3), for use with external
effects processor / FX Loop (see Section B.)
41. Cue (assign): Selects the channel to be monitored via headphone Cue
(Section D.)
42. Channel Fader (Line Fader): Controls the output level of the correspon-
ding channel. This control is Post-EQ and when NOT using Crossfader
Assign (#43) the signal is sent directly to the master output.
43. Crossfader Assign (A-B- BYPASS): Controls where the audio signal for
this channel will be sent; either to the Crossfader (#19) or to Master Output
(#6.) When set to A, this channel will be assigned to the left side of the
Crossfader; When set to B, this channel will be assigned to the right side of
the Crossfader. When set to BYPASS, the Crossfader will be bypassed alto-
gether and the audio is sent straight from the Line Fader (#42) to the Master
Output (Section C.) [Note: This allows the DJ to mix with or without using the
Crossfader].
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.406 Rear Panel (FUNCTIONS)
K
L
I
J
M
N
O
P
Q
R
Section I:
Section J:
Section K:
Section L:
Section M:
Section N:
Section O:
Section P:
Section Q:
Section R:
Power
Master Output
FX (Send & Return)
Zone Output
Sub Output
RCA Outputs
Channel 4 Inputs
Channel 3 Inputs
Channel 2 Inputs
Channel 1 Inputs
Section I: Power
I. Power Switch & Connection: This is the ON / OFF power switch for the
entire mixer. Only use the supplied adaptor (18v AC 1A) or one authorized
by a Stanton dealer or our service department (make sure the AC cable is
properly secured by the screw connection.) In order to protect the RM.406
and any equipment connected to it, make sure the unit is off before connect-
ing the power or making any other connections. In addition, make sure all
volumes are turned all the way down prior to following the proper power on/off
sequence. When turning on your system, turn the RM.406 on first, followed
by the rest of your equipment. When turning your system off, turn off the
RM.406 last.
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.406 Rear Panel (FUNCTIONS)
Section J: Master Output
J. Master Output Connection: These Right & Left XLR connections are
used for the Master Output signal. Volume levels for this output are controlled
by the section C front panel controls. NOTE: The TRIM knob sets the maxi-
mum volume allowed for this output (be sure it is set properly.) It should be
used in conjunction with the Master Fader (#6) as well as individual Gain
(#36) and Channel Faders (#42) when establishing optimal overall output for
the RM.406 and the sound system it is connected to. It is recommended to
consult an audio professional during this process.
Section K: Effects/FX
K. Send & Return Connections: These Right & Left 1/4 inch connections
are used for creating an FX loop (using an external effect processor.) Send
is an Output, Return is an Input and both levels are controlled by #’s 3, 4 & 5
(section C) front panel controls.
Section L: Zone Output
L. Zone Connection: These Right & Left output connections are used for a
secondary Master / Zone. Volume level for this output is controlled by the
section C front panel controls. Generally, this is used to send sound to anoth-
er part of the sound system (such as another room), or another completely
independent sound system.
Download from Www.Somanuals.com. All Manuals Search And Download.
RM.406 Rear Panel (FUNCTIONS)
Section P: Channel 3 Inputs
P. Channel 3 Input Connections:
This group of connections are ALL
inputs which are only routed to channel 3 (select input using section H, (#34)
from top panel.) Only two lines (L3, L7) and one phono (PH3) OR CD can be
used as inputs here (the select switch located here toggles between PH3 /
CD.) The 1/8” connection is used only for connecting devices with the Fader
Start feature with the appropriate cables (to activate Fader Start for this chan-
nel see Section E) NOTE: Line inputs are used to connect to line level
sources such as CD players, samplers, tape players, etc. Phono inputs are
used to connect to turntables. Mic inputs connect directly to microphones. To
prevent potential circuit damage, never connect a line level source to phono
inputs.
Section Q: Channel 2 Inputs
Q. Channel 2 Input Connections: This group of connections are ALL inputs
which are only routed to Channel 2 (select input using section H, (#34) from
top panel.) Only two lines (L2, L6) and one phono (PH2) OR CD can be input
here (the select switch located here toggles between PH2 / CD). The 1/8”
connection is used only for connecting devices with the Fader Start feature
with the appropriate cables (to activate Fader Start for this channel see
Section E) NOTE: Line inputs are used to connect to line level sources such
as CD players, samplers, tape players, etc. Phono inputs are used to connect
to turntables. Mic inputs connect directly to microphones. To prevent poten-
tial circuit damage, never connect a line level source to phono inputs.
Section R: Channel 1 Inputs
R. Channel 1 Input Connections: This group of connections are ALL inputs
which are only routed to Channel 1 (select input using section H, (#34) from
top panel.) Only one line (L1) and one phono (PH1) can be input here. The
“GND” connections are used only for phono inputs which require a Ground
cable and can be used for any phono input on any channel. NOTE: Line
inputs are used to connect to line level sources such as CD players, sam-
plers, tape players, etc. Phono inputs are used to connect to turntables. Mic
inputs connect directly to microphones. To prevent potential circuit damage,
never connect a line level source to phono inputs.
Download from Www.Somanuals.com. All Manuals Search And Download.
Application Example
This is a typical setup you’ll find in many nightclubs: 2 turntables, 2 CD play-
ers, plus a microphone for the DJ. Here’s how you would set up your equip-
ment with the RM.406:
1. Be sure all equipment is powered “OFF” and all of theRM.406’s Channel
faders and Level knobs are at minimum volume.
2. Connect the turntables to the Phono inputs of Channels 1 and 4. Be sure
the rear-panel toggle switch for Channel 4 is set to “PH2” or you won’t hear
anything. To avoid hum, don’t forget to connect the ground wires to the
grounding terminals.
3. Connect the CD players to the inputs of Channels 2 and 3. (if your CD play-
er supports fader start connect applicable cables)
4. If your CD players support Fader Start, connect the mini-cables and set the
Fader Start switches to “ON”.
5. Depending on the type of cable you have, connect your microphone to the
Mic1, 2, or 3 (1/4” / XLR) input.
6. Connect the Master Output jacks to the club’s power amp, EQ or
crossover. Then connect your monitor amp to the Booth output. If you have a
separate amp for a particular area of the club, connect this amp to the Zone
outputs.
7. If you wish to use an effects processer (sold separately) connect the appro-
priate cables from the send output connecters of the mixer to the IN on your
processer. Then connect appropriate cabless from the OUT of your process-
er to the RETURN on the rear connections of the mixer.
8. Set the Input Selectors on the front panel to the appropriate inputs for each
channel.
9. Power everything up and carefully adjust the input levels using the Input
Gain knobs and Mic Level knob.
10 Slowly raise the Channel faders, Master fader, Booth level, Zone level and
Mic level as appropriate and start mixing!
Download from Www.Somanuals.com. All Manuals Search And Download.
Superior Sound Technology
The audio quality of the RM.406 is nothing short of revolutionary for DJ mix-
ers in its price class. The RM.406 was designed by Stanton’s new product
development team, seasoned audio professionals who have designed world
class professional recording studio and broadcast mixers and product man-
agers who are working DJs and work closely with some of the world’s most
respected DJs. They have taken their knowledge and experience to create
the RM.406, a DJ mixer with superior audio quality and unprecedented value.
Come hear the difference!
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Line Inputs.................................................................................7 x 2 (RCA) , -10 dBV / >10 kOhm
1 (1/8” stereo mini-jack), 10 dBV / >10kOhm
Phono / CD Inputs...................................2 x 2 (RCA), -46 dBV / -10 dBV / 47 kOhm / >10 kOhm
Phono..............................................................................1 x 2 (RCA), -46 dBV (Phono) / 47 kOhm
Phono / Mic Input..................................1 x 2 (RCA), -46 dBV (Phono) 1 x (_ inch)–46 dBV (Mic)
Mic Input..................................................................................1 (XLR or 1/4”) -46 dBV / 2.4 kOhm
Master Outputs............................................................2 (XLR) balanced/ 1 x 2 (RCA) unbalanced,
-2 dBu balanced / -10 dBV unbalanced
Zone Outputs................................................................2 (1/4”) balanced /1 x 2 (RCA) unbalanced
-2 dBu balanced/ -10 dBV unbalanced
Booth Outputs.............................................................................1 x 2 (RCA) unbalanced /-10 dBV
Sub Outputs.............................................................................................1 (XLR) balanced/ -2 dBu
Record Output............................................................................1 x 2 (RCA) unbalanced / -10 dBV
Headphone Output...........................................1(1/4 inch), 1 (1/8 inch) greater than 32 Ohm load
Frequency Response.............................................................................20 Hz to 20 kHz +/- 1.5 dB
EQ Mic...........................................................................................3 band +10 dB (Baxandall Type)
Channel.......................................................................3 band +9 dB/kill (18 dB/octave DJ EQ)
Noise Floor
Line in to Unbalanced Output...........................................................................................< -92 dBV
Line In to Balanced Output................................................................................................< -88 dBu
Crosstalk*
Line to Phono Line to Line....................................................................................< -88 dB at 1 kHz
Phono to Line........................................................................................................< -88 dB at 1 kHz
Fader Kill (Channel and Crossfader)....................................................................< -90 dB at 1 kHz
Max Output Level:
(Unity Gain- Line Input)...................................................................................+18 dBV Unbalanced
+24 dBu Balanced Outputs
S/N Ratio Line
(Ref to Max. Level)DynamicRange....................................................................................> 110 dB
T.H.D+N...............................................................................................................< 0.015% at 1 kHz
Sub Woofer Output.......................................................................12 dB/octave Linkwitz-Riley Type
80 Hz to 320 Hz
Dimensions (LxWxD).........18.9 in. x 8.7 in. x 5.3 in. (48 cm. x 22 cm. x 13.3 cm.) 5U rack
spaces
* Input without signal terminated with dummy plug.
REPLACEMENT PARTS
Faders:
Crossfader: CF404
Power Supply:
110v PS16US (North & Central America and parts of South America)
220v PS16EU (Europe, Parts of Asia and South America and Rest of World)
240v PS16UK (U.K.)
To replace the cross or channel faders, follow step 1 of the cleaning instructions. Replacement
parts are available from Stanton or your local Stanton dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem / Symptom
No Sound
Possible Cause/ Solution
Is the power on? Check the power switch. Make
sure the channels are assigned properly to the
crossfaders. Make sure INPUT GAIN is turned up
and output level control is turned up. Depending
on the input, check the rear panel selector
switches. Check the top panel channel selector
switches.
No Sound- Master
Output (Booth and
Zone are OK)
Make sure that MASTER TRIM on the rear
panel is turned up.
Do the headphones work with the CUE pan in the
PROGRAM position but not PFL? If so, make
sure that the channel PFL switches are engaged.
Check the CUE LEVEL control.
No Sound
Headphones
Signal level is low
even with the
faders and input
level controls
turned up.
Check to make sure the talk switch is NOT
engaged on the microphone input.
Check to make sure that the microphone levels
are turned all of the way down if a microphone is
not being used.
Mixer sounds noisy
Is the Mic gain turned up? Does the microphone
require phantom power? This mixer does not
provide microphone phantom power.
Microphone doesn’t
work
In general, turn down the INPUT GAIN CONTROL.
The input signal may be too loud for the input gain
control setting that you were using. If the distortion
goes away, then you need to turn down the INPUT
GAIN CONTROL.
Sound is distorted-
Line or CD input
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem / Symptom
Possible Cause/ Solution
Only plug turntables into this input, do not plug in CD
players or other Line Level sources. Turn down the
INPUT GAIN CONTROL. Check the EQ settings.
Sound is distorted
Phono Input
Make sure you are using good shielded audio cables.
Some less expensive audio cables can be susceptible to
hum and interference. Keep your audio cables away
from AC power cables and AC transformers. Make sure
the mixer is not mounted too close to high power ampli-
fiers or lighting equipment power supplies or ballasts.
Make sure your turntables are properly grounded to the
back of the mixer if they include a grounding wire.
I hear hum.
If you are using a microphone, make sure that you are
not too close to the speakers or headphones. If you hear
feedback on the phono input, then the turntable may be
mounted to close to the speakers and/or subwoofer.
Also, make sure the turntable base is placed on a sur-
face that does not vibrate or resonate easily when the
speakers are turned up loudly.
I hear
feedback
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Stanton Magnetics, Inc. – Warranty Provision – Returns for Repairs or Replacement
Warranty
Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized dis-
tributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity
responsible for making the repair or providing the replacement, any Stanton merchandise proved
defective in material or workmanship for a period of one (1) year (three (3) years for C.D. players) fol-
lowing the date of original purchase. Exceptions to this warranty are as noted below:
The warranty for mechanical parts which are subject to wear and tear are limited to the earlier to occur
of thirty (30) days following the date of original purchase or the following number of cycles: Faders -
15,000; Rotary potentiometers - 10,000; and Switches - 10,000.
Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original ship-
ment. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not cov-
ered under this warranty.
Returns
Authorized Stanton dealers are only authorized to sell and distribute merchandise within a specific
country. All goods requiring warranty repair or replacement must be returned (freight prepaid if not
hand-delivered) to the authorized Stanton dealer from whom the merchandise was purchased and in
the same country where the merchandise was purchased. For purposes of purchases made via the
Internet, the merchandise must be returned to the authorized Stanton dealer in the country where the
authorized Stanton dealer which sold the merchandise to purchaser is located and not the authorized
Stanton dealer in the country where the purchaser is located or the country in which the merchandise
was received. Any returns to a non-authorized dealer or to an authorized Stanton dealer not in the same
country as the merchandise was intended to be sold or as set forth above will void this warranty.
To initiate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased
the merchandise, and follow such authorized Stanton dealer’s return policy.
Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the spe-
cific use or application made of the merchandise. Stanton's liability for any claim, whether based on
breach of contract, negligence, infringement of any rights of any party, or product liability, and relating
to the merchandise shall not exceed the price received by Stanton from your purchase of such mer-
chandise. In no event will Stanton be liable for any special, incidental or consequential damages
(including loss of use, loss of profit and claims of third parties) however caused, whether by the negli-
gence of Stanton or otherwise. To the extent permitted by law and except as otherwise provided above,
Stanton disclaims any express or implied warranties of merchantability or fitness for a particular pur-
pose.
The above warranty provides you with specific legal rights. You may also have additional rights, which
are subject to variation from state to state and country to country.
If there is a dispute regarding the warranty of merchandise that does not fall under the warranty condi-
tions stated above, please include a written explanation with the merchandise when returned pursuant
to the terms and conditions set forth herein.
Stanton Magnetics, Inc, 3000 SW 42 St. Hollywood, Florida 33312.
Download from Www.Somanuals.com. All Manuals Search And Download.
|