Owner's
Manual
WARNING
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
20-1200
Patent(s) pending
MADE IN CHINA
CAUTION:
Weight on this product should not exceed 250 lbs.
Product May Vary Slightly
From Pictured.
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service Number
1 (800) 375-7520
2008, 03
2008 Stamina Products, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
CALL US FIRST
THANK YOU FOR PURCHASING THE
Studio Tower
To help you get started, we have pre-assembled most of your
Studio Tower at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
With regular workouts you will be getting your body into shape
and on your way to achieving a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Thursday, 7:30 A.M. - 5:00 P.M. Central Time.
Friday, 8:00 A.M. - 3:00 P.M. Central Time.
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for choosing the Studio Tower . We
Although Stamina constructs its products with the
take great pride in producing this quality product and finest materials and uses the highest standards of
hope it will provide many hours of quality exercise to manufacturing and quality control, there can
make you feel better, look better and enjoy life to its sometimes be missing parts or incorrectly sized
fullest.
parts. If you have any questions or problems with
Yes, it's a proven fact that a regular exercise the parts included with your Studio Tower , please
program can improve your physical and mental do not return the product. Contact us FIRST!
health. Too often, our busy lifestyles limit our time
and opportunity to exercise. The Studio Tower
If a part is missing or defective, please call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
provides a convenient and simple method to begin Service Staff is available to assist you from 7:30A.M.
your assault on getting your body in shape and to 5:00 P.M. (Central Time) Monday through Thursday
achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
If you would like to contact us online, go to our
below and familiarize yourself with the parts that are website at www.staminaproducts.com and access the
labeled.
Customer Service section.
Read this manual carefully before using the Studio
Tower .
Be sure to have the name and model number of
the product available when you contact us.
Push-Thru Spring
Eyebolt
Top Beam
Arm Springs
Wooden Barre
Securing Strap
Spring Pin
Leg Springs
Securing Knob
Right Slider
Push-Thru
Left Upright
Safety Strap
Locking Pin
Bar
Right Upright
Roll-Down Bar
Locking Pin
Locking Pin
Warning Label
Locking Knob
Main Cushion
Handle Strap
Hand Strap
Wheel Cap
Base Cushion
Outer Cover
Base Frame
Extension Cushion
Main Frame
Round Stand
Hand Strap
Extension Frame
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY :
4
Allen Wrench (6mm)
Combination Wrench
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUIPMENT WARNING & NOTICE LABELS
This chart is provided to help identify the warning & notice labels on the Studio Tower . Please take a
moment to familiarize yourself with all of the warning & notice labels.
Label is larger than actual size
W1
WARNING LABEL(63)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers, the
ends of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the
length of the bolts and screws.
3/16"
1/4"
1
5/16"
3/8"
1/2
1/2"
INCHES
0
0
1/2
1/2
2
3
1/2
4
1/2
5
1/2
6
in.
mm.
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
length
MILLIMETERS
6
8
10
12
NOTICE: The length of all bolts and screws except those with flat heads is
measured from below the head to the end of the bolt or screw.
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.
length
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
Part No. and Description
Qty
45
Screw, Round Head (M4 x 20mm)
4
47
48
49
50
Bolt, Button Head (M8 x 1.25 x 50mm)
Bolt, Button Head (M8 x 1.25 x 55mm)
Bolt, Button Head (M8 x 1.25 x 60mm)
Bolt, Button Head (M8 x 1.25 x 70mm)
2
2
4
4
55
56
Acorn Nut (M8 x 1.25)
4
8
Nylock Nut (M8 x 1.25)
Washer (M8)
59
61
62
12
4
Arc Washer (M8)
Lock Washer (M8)
6
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
Loop
Loop
STEP 1: Note the correct position of the holes and loops on the LEFT UPRIGHT(7) and RIGHT UPRIGHT(9)
in the illustration above. The holes face away from the BASE CUSHION(4) and the loops face to the outside.
Attach the LEFT UPRIGHT(7) and the RIGHT UPRIGHT(9) to the BASE FRAME(3) by inserting the BUTTON
HEAD BOLTS(M8x1.25x70mm)(50) and ARC WASHERS(M8)(61) from top, and secure with WASHERS(M8)
(59) and NYLOCK NUTS(M8x1.25)(56) from bottom. Do not tighten the bolts until STEP 5.
STEP 2: Note the correct position of the loops on the LEFT SLIDER(8) and RIGHT SLIDER(10) in the
illustration above. The loops face to the outside.
Pull the SPRING PIN(12) then slide the RIGHT SLIDER(10) onto the RIGHT UPRIGHT(9). Release the
SPRING PIN(12) so it catches in one of the adjustment holes and locks the RIGHT SLIDER(10) in place.
Repeat with the LEFT SLIDER(8) and LEFT UPRIGHT(7). Position the LEFT and RIGHT SLIDERS(8,10)
so they are the same distance from the top of the LEFT and RIGHT UPRIGHTS(7,9).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 3
Attach the WOODEN BARRE(13) to the LEFT and RIGHT SLIDERS(8, 10) with BUTTON HEAD BOLTS
(M8x1.25x55mm)(49), LOCK WASHERS(M8)(62), and ACORN NUTS(M8x1.25)(55). Do not tighten the
bolts until STEP 5.
STEP 4
Note the correct position of the holes and EYEBOLTS(23) on the TOP BEAM(22) in the illustration above.
Insert the TOP BEAM(22) into the LEFT and RIGHT UPRIGHTS(7, 9) and secure with the SECURING
KNOBS(25).
STEP 5
Tighten the BUTTON HEAD BOLTS(M8x1.25x60mm)(49) to secure the WOODEN BARRE(13).
Tighten the BUTTON HEAD BOLTS(M8x1.25x70mm)(50) to secure the LEFT and RIGHT UPRIGHT(7,9).
STEP 6
Attach the OUTER COVER(15) and INNER COVER(14) to the RIGHT UPRIGHT(9) with ROUND HEAD
SCREWS(M4x20mm)(45). Repeat on other side.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 7
STEP 8
STEP 7
Refer to illustration step 7. Place the MAIN FRAME(1) with the cushion side face down. Attach the
EXTENSION FRAME(5) to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x55mm)(48),
WASHERS(M8)(59), and NYLOCK NUTS(M8x1.25)(56).
STEP 8
Refer to illustration step 8. Unfold the EXTENSION FRAME(5) from the MAIN FRAME(1) and turn the
cushion side face up. Attach the MAIN FRAME(1) to the BASE FRAME(3) with BUTTON HEAD BOLTS
(M8x1.25x50mm)(47), WASHERS(M8)(59), and NYLOCK NUTS(M8x1.25)(56).
Lock the MAIN FRAME(1) and the BASE FRAME(3) together with the LOCKING KNOBS(19).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
The safety and integrity designed into the Studio Tower can only be maintained when the Studio Tower
is regularly examined for damage and wear. Special attention should be given to the following:
1. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
2. Worn or damaged components should be replaced immediately or the Studio Tower removed from
service until repair is made.
3. Verify that the WARNING LABEL(63) is present and legible. Replace the WARNING LABEL(63) if it is
missing or damaged.
4. Inspect the WOODEN BARRE(13) for cracks or other damage. Replace the WOODEN BARRE(13) if it
is damaged.
5. Check the condition of the SAFETY STRAP(37). Replace the strap if damaged or worn.
6. Check the condition of the SPRINGS(34, 35, 36). Replace the springs that are damaged.
7. Check the HAND STRAPS(21) for damage. Replace damaged parts.
8. Check the FOAM SLEEVE(29), and SPRING SLEEVE(33) and replace if damaged or worn.
9. Check the CUSHIONS(2, 4, 6) and replace if it is damaged or worn.
10. Only Stamina Products supplied components shall be used to maintain/repair the Studio Tower .
11. Keep your Studio Tower clean by wiping with an absorbent cloth after use.
OPERATIONAL INSTRUCTIONS
WOODEN BARRE ADJUSTMENT
To adjust the height of the WOODEN BARRE(13). Turn
the SPRING PINS(12) on the LEFT and RIGHT SLIDERS
(8, 10) counter clockwise until the knob portion can be
pulled. Pull both SPRING PINS(12) at the same time and
slide the SLIDERS(8, 10) up or down to adjust. Release
the SPRING PINS(12) to lock the SLIDERS(8, 10) in the
desired adjustment holes. Rotate the SPRING PINS(12)
clockwise to lock the SLIDERS(8, 10) securely.
NOTE:
Always make sure that the SLIDERS(8,10) are adjusted
so the barre is parallel with the mat.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
SET-UP FOR THE PUSH-THRU BAR
NOTE: a. There are three adjustment holes in the LEFT and RIGHT UPRIGHTS(7, 9) that allow you to
attach the PUSH-THRU BAR(26) at one of three different heights.
b. Refer to the inset drawing. Push down the button on the "T" end of the LOCKING PIN(30) to
release the steel ball on the other end of the pin. Then you can insert the LOCKING PIN(30) into
the adjustment hole. Push the button to remove the pin.
c. Always make sure SAFETY STRAP(37) is connected when the PUSH-THRU BAR(26) is in use.
d. Always use SECURING STRAP(32) to keep the PUSH-THRU BAR(26) in a secure position
when not in use.
1. Attach the PUSH-THRU BAR(26) to one of the adjustment holes in the UPRIGHTS(7, 9) with two
LOCKING PINS(30).
2. Attach the SECURING STRAP(32) to the EYEBOLT(23) on the top of the TOP BEAM(22). For some
exercises, the PUSH-THRU BAR(26) should be up and secured in position with the SECURING STRAP
(32).
3. The PUSH-THRU BAR(26) can be used as a footbar for some exercises. Attach the PUSH-THRU BAR(26)
to the lowest adjustment holes in the UPRIGHTS(7, 9) with two LOCKING PINS(30). Lock the PUSH-
THRU BAR(26) and UPRIGHTS(7, 9) together with two LOCKING PINS(30).
Button
This bar can be used
as a footbar.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
TO USE THE ACCESSORIES:
PUSH-THRU BAR(26)
When doing exercises that require the spring resistance to come from above the bar, attach the PUSH-
THRU SPRING(34) to the loop on the upper side of the PUSH-THRU BAR(26) with the DOUBLE ENDED
CLIP(38). Attach the other end of the PUSH-THRU SPRING(34) to one of the loops on the TOP BEAM(22)
with the LINK(31). Refer to illustration A.
A.
B.
When doing exercises that require the spring resistance to
come from below the bar, attach the PUSH-THRU SPRING(34)
to the loop on the underside of the PUSH-THRU BAR(26) with
the DOUBLE ENDED CLIP(38). Attach the other end of the
PUSH-THRU SPRING(34) to one of the loops on the
UPRIGHTS(7, 9) with the LINK(31). Be sure that the SAFETY
STRAP(37) is always connected to the PUSH-THRU BAR(26)
when in use. Refer to illustration B.
CAUTION !
When using the PUSH-THRU SPRING(34) from below, you
must hook the spring to the loops on the UPRIGHTS(7, 9) with
the LINK(31) and make sure the SAFETY STRAP(37) is
connected. Ensure that the SPRING SLEEVE(33) which covers
the PUSH-THRU SPRING(34) is moved over the lower part of
the spring to avoid pulling the user's hair or clothing.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
TO USE THE ACCESSORIES: (continued)
SAFETY STRAP(37)
Refer to the illustration. The SAFETY STRAP(37) must be used
as follows:
When using the PUSH-THRU BAR(26) with the PUSH-THRU
SPRING(34) attached from below for bottom load exercises,
attach the SAFETY STRAP(37) to another side of the tower
from the spring. Connect one end of the strap to one of the
EYEBOLTS(23) on the TOP BEAM(22) with the LINK(31).
Connect the other end of the strap to the loop on the PUSH-
THRU BAR(26) with the LINK(31).
Loop
NOTE:
There are three D rings on each end of the SAFETY
STRAP(37). Connect the SAFETY STRAP(37) with differentD
rings to set the PUSH-THRU BAR(26) in different position.
ROLL-DOWN BAR(39)
The ROLL-DOWN BAR(39) attaches via the ARM SPRINGS
(35) to the EYEBOLTS(23) on the TOP BEAM(22) between
the two UPRIGHTS(7,9) with the LINKS(31). Attach the ARM
SPRINGS(35) to the ROLL-DOWN BAR(39) with the DOUBLE
ENDED CLIPS(38). Be sure the links and clips are completely
closed and secure.
ARM SPRINGS(35)
Attach ARM SPRINGS(35) to eyebolts at desired height with the LINKS(31). Attach the other ends of the
springs to the HAND STRAPS(21) with the DOUBLE ENDED CLIPS(38). Ensure the links and clips are
completely closed and secured.
LEG SPRINGS(36)
Attach LEG SPRINGS(36) to eyebolts at desired height with the LINKS(31). Attach the other ends of the
springs to the HAND STRAPS(21) with the DOUBLE ENDED CLIPS(38). Ensure the links and clips are
completely closed and secured.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE
1.
Store the Studio Tower in a clean, dry place.
WARNING:
When folding or unfolding the Studio Tower , keep all children away from the Studio Tower
and make sure your hands are clear of any folding or pinch point.
2.
Follow these steps and refer to the illustration to fold the Studio Tower for easy storage.
a. Move any attached accessories to the back side of the tower so the mats can fold up against the
WOODEN BARRE(13).
b. Remove the LOCKING KNOBS(19) to unlock the MAIN FRAME(1).
c. With one hand on one of the HANDLE STRAPS(20) on the MAIN CUSHION(2), and one hand on the
EXTENSION FRAME(5), slowly lift the MAIN FRAME(1) and EXTENSION FRAME(5). The
EXTENSION FRAME(5) will fold down against the MAIN FRAME(1) as you lift.
d. When both frames are in the most vertical position possible, parallel to the LEFT and RIGHT
UPRIGHTS(7,9), secure the MAIN FRAME(1) to the LEFT and RIGHT UPRIGHTS(7,9) with the
LOCKING KNOBS(19).
3.
To move the Studio Tower , it must be folded. While standing on the BASE CUSHION(4) side of the
folded Studio Tower , grasp the TOP BEAM(22) with one hand, place your foot against the BASE
CUSHION(4), and hold the LEFT or RIGHT UPRIGHT(7,9) with your other hand. Pull the top of the
Studio Tower toward you while holding the base steady with your foot until the wheels come in contact
with the floor. Then roll the Studio Tower while holding the TOP BEAM(22) and LEFT or RIGHT
UPRIGHT(7,9) to steady and guide the Studio Tower
UNFOLD THE Studio Tower
a. Remove the LOCKING KNOBS(19) from the UPRIGHTS(7, 9).
b. With one hand on one of the HANDLE STRAPS(20) on the MAIN CUSHION(2), and one hand on the
EXTENSION FRAME(5), slowly unfold and lower the MAIN FRAME(1) and EXTENSION FRAME(5).
c. Lock the MAIN FRAME(1) to the BASE FRAME(3) with the LOCKING KNOBS(19).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
MODEL 20-1200
WARRANTY
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on parts and upholstery and 5 years
on the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL
NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO ABUSE, MISUSE, ALTERATION OF
ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAIR, REPLACEMENT,
SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED BY STAMINA PRODUCTS,
INC.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase and
a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield
Missouri, USA, 65801-1071 or call us at 1 (800) 375-7520. If the defect is covered under this limited
warranty, you will be requested to return the product or part to us for free repair or replacement at our option.
NO ACTION FOR BREACH OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE
(1) YEAR AFTER THE DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED.
NO ACTION FOR BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE
(1) YEAR AFTER DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not
transferable. IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED
WARRANTY OR ANY IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE
EXCLUSIVE REMEDY AVAILABLE TO YOU. In the event that the purchaser makes any claim under this
limited warranty or any implied warranty, the Warrantor reserves the right to require the product to be returned
for inspection, at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of
the enclosed warranty registration card is not required for warranty coverage, but is merely a way of
establishing the date and place of purchase.
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF
TIME, INCONVENIENCE, OR ANY OTHER INDIRECT, CONSEQUENTIAL, SPECIAL OR INCIDENTAL
DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY IMPLIED WARRANTY.
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This warranty
gives you specific legal rights, and you may also have other legal rights which vary from state to state.
ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED INDURATION TO THE
DURATION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods to
disclaim or limit implied warranties and consequential and incidental damages with respect thereto. If any
such law is found to be applicable, the foregoing disclaimers and limitations of and on implied warranties and
consequential and incidental damages with respect thereto shall be disregarded and shall be deemed not to
have been made to the extent necessary to comply with such legal restriction.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT PARTS DRAWING
BACK
FRONT
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
DIAGRAM#
PART NAME
QTY
1
2
3
4
5
6
7
8
Main Frame
Main Cushion
Base Frame
Base Cushion
Extension Frame
Extension Cushion
Left Upright
Left Slider
Right Upright
Right Slider
Slider Bushing
Spring Pin
Wooden Barre
Inner Cover
Outer Cover
Wheel Cap
Base Stand
Round Stand
Locking Knob
Handle Strap
Hand Strap
Top Beam
Eyebolt
Plastic Spacer
Securing Knob
Push-Thru Bar
Push-Thru Bar Bushing
Crossing Bar
Foam Sleeve
Locking Pin
Link
Securing Strap
Spring Sleeve
Push-Thru Spring
Arm Spring
Leg Spring
Safety Strap
1
1
1
1
1
1
1
1
1
1
4
2
1
2
2
2
2
11
2
2
4
1
7
7
2
1
8
1
1
4
8
1
1
1
2
2
1
5
1
2
2
2
2
6
19
4
2
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Double Ended Clip
Roll-down Bar
Short Eyehook
Endcap (31.8mm)
Endcap (50mm)
Round Plug (60mm)
Rectangular Plug (20mm x 40mm)
Screw, Round Head (M4 x 20mm)
Screw, Flat Head (M5 x 0.8 x 8mm)
Bolt, Button Head (M8 x 1.25 x 50mm)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
DIAGRAM#
PART NAME
QTY
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
Bolt, Button Head (M8 x 1.25 x 55mm)
Bolt, Button Head (M8 x 1.25 x 60mm)
Bolt, Button Head (M8 x 1.25 x 70mm)
Bolt, Hex Head (M6 x 1 x 20mm)
Bolt, Hex Head (M6 x 1 x 55mm)
Bolt, Flat Head (M6 x 1 x 15mm)
Acorn Nut (M6 x 1)
Acorn Nut (M8 x 1.25)
Nylock Nut (M8 x 1.25)
Washer (M4)
Washer (M6)
Washer (M8)
Arc Washer (M6)
Arc Washer (M8)
Lock Washer (M8)
Warning Label
Allen Wrench (6mm)
Combination Wrench
Manual
2
4
4
11
4
4
9
4
8
4
15
12
7
4
4
1
1
1
1
Video Disc (DVD)
1
18
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX/MAIL ORDERING FORM
Please do not return the product. For your convenience, Stamina has a Customer Service Department with
a toll-free number. Should a part be missing or a defective part found, please call 1 (800) 375-7520
(in the U.S.) from 7:30A.M. to 5:00 P.M. Central Time, Monday through Thursday and 8:00A.M. to 3:00 P.M.
on Friday or fill out the fax sheet ordering form below and fax it to (417) 889-8064. Our Customer Service
Department will be able to assist you with your problem and the part will be mailed directly to your house.
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
Detach and Mail or Fax the Form Below
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Mr./Ms:
Address:
City:
Apt. #:
Zip Code:
State:
IMPORTANT: We must have your phone number in order to process the order!
Phone #: (
)
Work Phone #: (
)
Date Purchased:
Model #:
Purchased From:
IMPORTANT : Before filling out the form below make sure you have the right information.
Refer to the parts list to make sure you're ordering the right parts!
PART #
1
DESCRIPTION
QUANTITY
1
EXAMPLE:
Rear Unit Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|