Owner's Manual
! WARNING !
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
55-1539A
STAMINA PRODUCTS
CAUTION: 1. Weight on this product should not exceed 300 lbs.
MADE IN CHINA
2. Class H equipment: This equipment is for home
use only. It is not for commercial use.
Product May Vary Slightly
From Pictured.
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service
1 (800) 375-7520
2008, 06
2008 Stamina Products, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
CALL US FIRST
1(C8u0s0to)m3er7S5e-r7vi5ce20
THANK YOU FOR PURCHASING THE
Therapy Inversion System
To help you get started, we have pre-assembled most of your
Therapy Inversion System at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
With regular workouts you will be getting your body into shape
and be on your way to achieving a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.
Friday, 8:00 A.M. - 3:00 P.M., Central Time.
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for choosing the Therapy Inversion
Although Stamina constructs its products with the
System. We take great pride in producing this quality finest materials and uses the highest standards of
product and hope it will provide many hours of quality manufacturing and quality control, there can
exercise to make you feel better, look better, and sometimes be missing parts or incorrectly sized
enjoy life to its fullest.
parts. If you have any questions or problems with
It's a proven fact that a regular exercise program the parts included with your Therapy Inversion
can improve your physical and mental health. Too System, please do not return the product. Contact
often, our busy lifestyles limit our time and opportunity us FIRST!
to exercise. The Therapy Inversion System
If a part is missing or defective, please call us toll
provides a convenient and simple method to begin free at 1-800-375-7520 (in the U.S.). Our Customer
your assault on getting your body in shape and Service Staff is available to assist you from 7:30A.M.
achieving a happier and healthier lifestyle.
to 5:00 P.M. (Central Time) Monday through Thursday
Before reading further, please review the drawing and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
below and familiarize yourself with the parts that are
labeled.
If you would like to contact us online, go to our
Read this manual carefully before using the Therapy Customer Service section.
Inversion System. Be sure to have the name and model number of the
product available when you contact us.
Nylon Bed
Handrail
Handrail
Right Pivot Arm
Right Protective
Cover
Height
Locking Knob
Rear Frame
Adjustment Beam
Lever
Foam Pad
Buckle Strap
Warning Label
Footrest
Bumper
Round Stand
Heel Holder
Front Frame
THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY :
Wrench
Combination Wrench
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUIPMENT WARNING & NOTICE LABELS
This chart is provided to help identify the warning & notice labels on the Therapy Inversion System.
Please take a moment to familiarize yourself with all of the warning & notice labels.
Label is larger than actual size
W1
WARNING LABEL(61)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers, the
ends of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the
length of the bolts and screws.
3/16"
1/4"
1
5/16"
3/8"
1/2
1/2"
INCHES
0
0
1/2
1/2
2
3
1/2
4
1/2
5
1/2
6
in.
mm.
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
length
MILLIMETERS
6
8
10
12
NOTICE: The length of all bolts and screws except those with flat heads is
measured from below the head to the end of the bolt or screw.
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.
length
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
Part No. and Description
Qty
43
44
Bolt, Hex Head (M6 x 1 x 42mm)
Bolt, Hex Head (M6 x 1 x 47mm)
1
1
45
46
Bolt, Hex Head (M8 x 1.25 x 15mm)
Bolt, Hex Head (M8 x 1.25 x 25mm)
2
2
48
49
Nylock Nut (M6 x 1)
Nylock Nut (M8 x 1.25)
1
4
50
51
52
53
Washer (M6)
Washer (M8)
Large Washer (M8)
Large Washer (M6)
3
6
2
2
54
67
Bolt, Round Head (M6 x 1 x 10mm)
2
1
Lock Washer (M6)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please call
R
L
The bracket
needs to
point
toward
the footrest.
The bracket needs to
point toward the footrest.
STEP 1
Unfold the BASE ASSEMBLY to an upright position by moving the FRONT FRAME(1) away from REAR
FRAME(2). Then push down on the middle of the two FOLDING LINKAGES(3) until they are fully locked
down.
STEP 2
There is a "L" decal on the LEFT PIVOT ARM(5), and a "R" decal on the RIGHT PIVOT ARM(6). Slide the
bottom of the LEFT and RIGHT PIVOT ARMS(5, 6) into the brackets located at each side of the MAIN
FRAME(4). Align the hole on the arm with the peg on the bracket, and insert the peg into the hole to lock the
PIVOT ARMS(5, 6) in position. Then secure the PIVOT ARMS(5, 6) on the pegs with ROUND HEAD
BOLTS(M6x1x10mm)(54) and LARGE WASHERS(M6)(53).
STEP 3
Attach the MAIN FRAME(4) onto the REAR FRAME(2) by sliding the slots in the ends of the PIVOT ARMS
(5, 6) into the slots on the REAR FRAME(2). Secure the PIVOT ARMS(5, 6) in the slots by screwing the
HEX BOLTS(M8x1.25x15mm)(45), WASHERS(M8)(51), LARGE WASHERS(M8)(52), and NYLOCK
NUTS(M8x1.25)(49) onto the brackets on the REAR FRAME(2).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 4
Attach the FOOTREST(13) onto the HEIGHTADJUSTMENT BEAM(12) with the ADJUSTMENT KNOB(24).
NOTE:
The four adjustment holes in the FOOTREST(13) allow the FOOTREST(13) to be attached in four
different positions. Start with one of the center positions and adjust if necessary. Use the outer
position if users are taller than average. Use the inner position if users are shorter than average.
STEP 5
Insert the HEEL HOLDER TUBE(17) through the hole on the HEIGHT ADJUSTMENT BEAM(12) and
secure with HEX BOLT(M6x1x47mm)(44), WASHERS(M6)(50), and NYLOCK NUT(M6x1)(48). Place a
HEEL HOLDER BRACKET(18) onto a HEEL HOLDER(19), then slide them onto HEEL HOLDER TUBE(17)
together. Repeat on other side.
STEP 6
Insert the OUTER PAD TUBE(15) through the hole on the LEVER(56). Insert the INNER PAD TUBE(14)
into the OUTER PAD TUBE(15). Align the holes on the INNER PAD TUBE(14), OUTER PAD TUBE(15),
and LEVER(56), then bolt them together with HEX BOLT(M6x1x42mm)(43), LOCK WASHER(M6)(67),
and WASHER(M6)(50). Slide the FOAM PADS(16) onto the INNER and OUTER PAD TUBES(14, 15).
WARNING: The PAD TUBES(14, 15) must be assembled with the ends pointed downward as shown. The
ends must be pointed downward to properly secure the users feet in place during inversion.
Improper assembly will allow the user's feet to come loose and the user will fall from the inversion
table.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
A.
Buckle
B.
C.
1.
2.
Buckle
STEP 7
Install the HEIGHT ADJUSTMENT BEAM(12) into MAIN FRAME(4) by pulling the SPRING PIN(22) on the
MAIN FRAME(4) and inserting the HEIGHT ADJUSTMENT BEAM(12) as shown. For added safety, thread
the SECURING KNOB(23) into the back side of the MAIN FRAME(4).
Do not use the Therapy Inversion System until you have verified your height setting. Failure
to use the proper height setting can result in difficulty recovering from the decline position. See
HEIGHT ADJUSTMENT instructions on page 11.
WARNING:
STEP 8
Attach the NYLON STRAP(31) onto the BUCKLE on the end of the BUCKLE STRAP(32) by inserting the
end of the strap up through the bottom of the buckle, as shown in the illustration 1.
STEP 9
Hook the end of the NYLON STRAP(31) onto the loop on the back of the MAIN FRAME(4). Hook the end of
the BUCKLE STRAP(32) onto the loop on the FRONT FRAME(1).
NOTE:
The NYLON STRAPS are used to control the decline angle of the Therapy Inversion System. For
a steeper decline angle, lengthen the straps. For a lessor decline angle, shorten the straps. Make sure
these NYLON STRAPS are tight in the buckle and check the decline angle before using the Therapy
Inversion System.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
Nylon Bed
(10) Handrail
Shaft
(10) Handrail
RIGHT
Shaft
LEFT
STEP 10: Slide the LEFT and RIGHT PROTECTIVE COVERS(26, 27) onto each side of the BASE
ASSEMBLY. Make sure the SHAFTS on the FRONT FRAME(1) poke out through the hole on the
PROTECTIVE COVERS(26, 27).
Do not secure the PROTECTIVE COVERS(26, 27) to the FOLDING LINKAGES(3) with the
NOTE:
SECURING STRAPS on the covers until STEP 12.
STEP 11: Attach the LINKAGE(7) onto the LEFT HANDRAILASSEMBLY(8) with the LOCKING KNOB(11).
Slide the LEFT HANDRAILASSEMBLY(8) onto the SHAFT in the FRONT FRAME(1) and secure in position
with the LOCKING KNOB(11). Repeat on other side.
STEP 12: Attach the LINKAGES(7) onto the LEFT and RIGHT PIVOT ARMS(5, 6) with BOLTS
(M8x1.25x25mm)(46), WASHERS(M8)(51), and NYLOCK NUTS(M8x1.25)(49). DO NOT OVER TIGHTEN
THE BOLTS. Pull the PROTECTIVE COVERS(26, 27) down until the bottom of the covers are slightly lower
than the FOLDING LINKAGES(3). Secure the PROTECTIVE COVERS(26, 27) to the FOLDING LINKAGES
with the SECURING STRAPS on the covers.
NOTE:
When the PROTECTIVE COVERS(26, 27) are assembled correctly the FOLDING LINKAGES(3)
should not be visible.
STEP 13: Verify that the handlebars function correctly before using the Therapy Inversion System.
Move the Nylon Bed on the MAIN FRAME(4) backward toward the inverted position. The HANDRAILS(10)
must move forward as the MAIN FRAME(4) moves backward. If the HANDRAILS(10) do not move forward
check ASSEMBLY STEPS 2, 11, and 12.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
GENERAL PRECAUTIONS
1. Do not use the Therapy Inversion System alone. Always have a helper available in case assistance is
needed in recovering from the decline position.
2. Make sure that the FOAM PADS(16) and HEEL HOLDERS(19) are holding your feet securely.
3. Make sure that the HEIGHT ADJUSTMENT BEAM(12) is properly set for your height.
4. Make sure that the HEIGHT ADJUSTMENT BEAM(12) is held securely by both the SPRING PIN(22)
and the SECURING KNOB(23).
5. Make sure that there is enough room for the bed to rotate completely.
HEIGHT ADJUSTMENT
The Therapy Inversion System is a very sensitive balance device. It responds to very slight changes in
weight distribution. It is very important to make sure that the height adjustment is adjusted properly. Use the
following procedure to set the height adjustment and balance the Therapy Inversion System.
Adjust the NYLON STRAPS to restrict
movement to approximately 15 degrees
beyond the horizontal position. The nylon
straps should not allow the Therapy
Inversion System to go into the full inversion
position while you are setting the height
adjustment.
1.
Loosen the SECURING KNOB(23) under the
MAIN FRAME(4).
Pull the SPRING PIN(22) and use the
SCALE DECAL(20) to set the HEIGHT
ADJUSTMENT BEAM(12).
2.
3.
Tighten the SECURING KNOB(23).
Mount the machine.
Lock your ankles into the FOAM PADS(16)
and HEEL HOLDERS(19).
4.
5.
6.
Lie back with your hands at your sides.
Slowly raise your hands to your chest.
7.
8.
9. If your feet are higher than your head, dismount and try a taller setting. If you do not rotate to a position
close to level, dismount and try a shorter setting.
NOTE: The Therapy Inversion System should return to the upright position when your hands are below
your waist. If it does not, use a taller setting.
HANDRAILS
The Therapy Inversion System features a set of Handrails for added convenience and safety. The Handrails
are connected to the bed with linkages so that pulling on the Handrails will move the bed away from the
inverted position toward the upright position.
1. Pull the Handrails to pull yourself to the upright position from any degree of inversion. If you wish to
return to the upright position and the bed is not moving or moving too slowly, grasp and pull the Handrails
until you return to the upright position.
2. Grasp the Handrails to control the speed of inversion or stop the inversion.
WARNING: Make sure that the Handrails are functioning properly before going into full inversion.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
Button
HEEL HOLDER USE AND ADJUSTMENT
1. Place your feet on the FOOTREST(13) with your ankles between the
HEEL HOLDERS(19) and FOAM PADS(16).
2. The HEIGHT ADJUSTMENT BEAM(12) includes a LEVER(56) to grip
and release your feet. Pull the LEVER(56) toward you until your ankles
are securely held between the HEEL HOLDERS(19) and FOAM
PADS(16).
3. To release your feet or relax the grip, pull the lever toward you slightly
and press the button on the end of the lever.
USING THE INVERSION TABLE
1. Start by lying fully back on the bed with your hands at your side, or resting on your thighs.
2. Keeping your hands close to your body begin to raise your arms slowly allowing the table to rotate
backward. Stop, or lower your arms to control the downward rotation of the table.
3. Raise your arms until they are over your head. At this point, the inversion table will be as far back as it
can go.
4. As you get more comfortable with the use, rock the bed slowly by moving your arms up and down slowly.
5. A gentle swinging motion will alternately put your spine in traction and compression. This rhythmic type
of traction is used by many hospitals and doctors to treat certain back problems.
6. It is recommended that the inversion table be used for five or ten minutes each morning, and again each
evening.
7. Return to the upright position by slowly moving your hands back down to your thighs.
1.
3.
2.
4.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
SUGGESTIONS FOR USE
1. Begin slowly; invert only 15-20 degrees to begin with. Stay inverted only as long as you are comfortable.
Return upright slowly.
2. Make gradual changes: increase the angle only if it is comfortable. Increase the angle only a few degrees
at a time. Increase the time of use 1-2 minutes up to ten over a period of weeks. Add stretching and light
exercise only after you are comfortable with inversion.
3. Watch your body: come up slowly, dizziness after a session means you came up to fast. Wait a while
after eating before using table. If you get nauseous, do not fight it, come up as soon as you feel queasy.
4. Keep moving: movement while inverted encourages blood, lymph, and spinal fluid circulation and aids in
alignment of bones and organs. Movement may be accomplished by either rhythmic traction or light
exercise. Do not exercise strenuously while inverted. Limit partial inversion without movement to one or
two minutes. Limit full inversion with no movement to only a few seconds.
5. Invert regularly: we recommend two or three times a day depending upon your current condition. Try to
schedule it for the same times each day.
A.
B.
C.
LOCKING THE BED
When the inversion table rotates past the vertical inverted position the bed becomes locked, and will not
return to the upright position in the usual way. The locked position allows you to hang straight upside-down
completely free of the bed. This position allows you to enjoy all of the benefits of a handstand, with none of
the discomforts, as shown in illustration A. It also allows you to do exercises such as the waistband, as
shown in illustration B.
To get into the locked position, if necessary, adjust the HEIGHT ADJUSTMENT BEAM(12) shorter, and
then mount and use normally. When your arms are completely extended above your head, the bed will
rotate all the way to the locked position.
CAUTION: You must understand how to recover from the fully inverted position before using the fully
inverted position. Read the RECOVERY FROM LOCKED POSITION section below BEFORE
using the fully inverted position.
RECOVERY FROM LOCKED POSITION
To recover from the locked position, simply grab the HANDRAILS and pull on them while pushing back on
the HEEL HOLDERS(19) with your legs. If you can not reach the HANDRAILS, then you can still recover by
grabbing the back of the bed with one hand, the REAR FRAME(2) with the other, and pulling your hands
together, as shown in illustration C.
MAINTENANCE INSTRUCTIONS
The safety level of the Therapy Inversion System can be maintained only if it is examined regularly for
damage and wear.
1. Check the warning label, nylon strap, strap buckle, pivot arms, nylon bed, heel holders, foam pads, and
spring pin for damage and wear.
2. Replace damaged and worn components immediately and/or keep the equipment out of use until repairs
are complete.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT PARTS DRAWING
BACK
FRONT
14
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
DIAGRAM#
PART NAME
QTY
1
2
3
4
5
6
7
8
Front Frame
Rear Frame
Folding Linkage
Main Frame
Left Pivot Arm
Right Pivot Arm
Linkage
Left Handrail Support
Right Handrail Support
Handrail
Locking Knob
Height Adjustment Beam
Footrest
Inner Pad Tube
Outer Pad Tube
Foam Pad
1
1
2
1
1
1
2
1
1
2
4
1
1
1
1
2
1
2
2
1
2
1
1
1
1
1
1
2
1
2
1
1
1
4
2
4
2
1
1
2
4
4
1
1
2
4
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
Heel Holder Tube
Heel Holder Bracket
Heel Holder
Scale Decal
Bushing
Spring Pin
Securing Knob
Adjustment Knob
Nylon Bed
Left Protective Cover
Right Protective Cover
Foam Grip
Bumper
Hook
Nylon Strap
Buckle Strap
Hollow Cap
Round Stand
Oval Plug (20mm x 60mm)
Dome Plug (7/8")
Round Plug (1")
Square Plug (1 5/16" x 1 5/16")
Square Plug (1 1/2" x 1 1/2")
Bolt, Button Head (M6 x 1 x 40mm)
Bolt, Button Head (M6 x 1 x 8mm)
Bolt, Round Head (M6 x 1 x 50mm)
Bolt, Hex Head (M6 x 1 x 42mm)
Bolt, Hex Head (M6 x 1 x 47mm)
Bolt, Hex Head (M8 x 1.25 x 15mm)
Bolt, Hex Head (M8 x 1.25 x 25mm)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
DIAGRAM#
PART NAME
QTY
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
Bolt, Hex Head (M8 x 1.25 x 20mm)
Nylock Nut (M6 x 1)
Nylock Nut (M8 x 1.25)
Washer (M6)
2
1
8
15
14
2
2
2
1
1
1
1
1
1
1
1
1
1
Washer (M8)
Large Washer (M8)
Large Washer (M6)
Bolt, Round Head (M6 x 1 x 10mm)
Support Washer
Lever
Hand Grip
Pressing Bar
Claw
Spring
Warning Label
Wrench
Combination Wrench
Manual
Instruction Video (DVD)
Plastic Washer (M8)
Lock Washer (M6)
Acorn Nut (M6 x 1)
1
2
5
4
16
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
MODEL 55-1539A
WARRANTY
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on the parts and 5 years on the
frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT
APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE,
ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAIR,
REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED BY STAMINA
PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health clubs, spas,
gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the product's use is
in furtherance of a profit making enterprise, and all other use which is not for personal, family, or household
purposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase and
a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield
1 (800) 375-7520. If the defect is covered under this limited warranty, you will be requested to return the
product or part to us for free repair or replacement at our option. NO ACTION FOR BREACH OF THIS
LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER THE DATE THE
ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED. NO ACTION FOR BREACH OF
ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER DELIVERY OF
THE PRODUCT TO THE PURCHASER. This limited warranty is not transferable. IF ANY PART OF THE
PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTY,
THE REMEDY OF REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDYAVAILABLE TO YOU. In
the event that the purchaser makes any claim under this limited warranty or any implied warranty, the Warrantor
reserves the right to require the product to be returned for inspection, at the purchaser's expense, to the
Warrantor's premises in Springfield, Missouri. Return of the enclosed warranty registration card is not required
for warranty coverage, but is merely a way of establishing the date and place of purchase.
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,
SPECIAL OR INCIDENTALDAMAGESDUE TO BREACH OF THEABOVE WARRANTY ORANY IMPLIED
WARRANTY.
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This warranty
gives you specific legal rights, and you may also have other legal rights which vary from state to state.
ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED INDURATION TO THE
DURATION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods to
disclaim or limit implied warranties and consequential and incidental damages with respect thereto. If any
such law is found to be applicable, the foregoing disclaimers and limitations of and on implied warranties and
consequential and incidental damages with respect thereto shall be disregarded and shall be deemed not to
have been made to the extent necessary to comply with such legal restriction.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
18
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX/MAIL ORDERING FORM
Please do not return the product. For your convenience, Stamina's Customer Service Department can be
reached by email at [email protected] or toll free at 1-800-375-7520 (in the U.S.). Should a part
be missing or a defective part found, please call us from 7:30 A.M. to 5:00 P.M. Central Time, Monday
through Thursday and 8:00 A.M. to 3:00 P.M. on Friday or fill out the fax sheet ordering form below and fax
it to (417) 889-8064. Our Customer Service Department will be able to assist you with your problem and the
part will be mailed directly to your house.
TELEPHONE
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
Detach and Mail or Fax the Form Below
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Mr./Ms:
Address:
City:
Apt. #:
Zip Code:
State:
IMPORTANT: We must have your phone number in order to process the order!
Phone #: (
)
Work Phone #: (
)
Date Purchased:
Model #:
Purchased From:
IMPORTANT : Before filling out the form below make sure you have the right information.
Refer to the parts list to make sure you're ordering the right parts!
PART #
1
DESCRIPTION
QUANTITY
1
EXAMPLE:
Rear Unit Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|