Owner's
Manual
!
WARNING
Exercise can present a
health risk. Consult a
physician before beginning
any exercise program with
this equipment. If you feel
faint or dizzy, immediately
discontinue use of this
equipment. Serious bodily
injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur
if all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
securely tightened prior to
each use. Follow all safety
instructions in this manual.
When calling for parts or
service, please specify
the following number:
Product May Vary Slightly From Pictured.
Model#: A150-335
CAUTION:
Weight on this product should not exceed 250 lbs.
This Product is Distributed Exclusively by
STAMINA PRODUCTS
MADE IN TAIWAN
2040 N. Alliance, Springfield, MO 65803
Customer Service
2011 Stamina Products, Inc.
2011, 06
©
1 (800) 375-7520
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Us First
1C(8us0t0om)3er7S5e-r7v5ic2e0
THANK YOU FOR PURCHASING THE
AVARI® Conversion II Rower Recumbent Bike
To enact your warranty, please register your product
by going to register.staminaproducts.com
To help you get started, we have pre-assembled most of your
AVARI® Conversion II Rower Recumbent Bike at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
With regular workouts, you will be getting your body into shape
and be on your way to achieving a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.
Friday, 8:00 A.M. - 3:00 P.M., Central Time.
ONLINE
TELEPHONE
FAX
MAIL
CUSTOMER SERVICE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
CUSTOMER SERVICE
Fax: (417) 889-8064
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
T h a n k y o u f o r c h o o s i n g t h e AVA R I ®
Although Stamina constructs its products with
Conversion II Rower Recumbent Bike. We take the finest materials and uses the highest standards
great pride in producing this quality product and of manufacturing and quality control, there can
hope it will provide many hours of quality exercise sometimes be missing parts or incorrectly sized
to make you feel better, look better, and enjoy life parts. If you have any questions or problems with
to its fullest.
the parts included with your AVARI® Conversion
It's a proven fact that a regular exercise program II Rower Recumbent Bike, please do not return
can improve your physical and mental health. the product. Contact us FIRST!
Too often, our busy lifestyles limit our time and
If a part is missing or defective, please go to
opportunity to exercise. The AVARI® Conversion staminaproducts.com to the Services section and
II Rower Recumbent Bike provides a convenient order the part needed, or call us toll free at 1-800-
and simple method to begin your assault on getting 375-7520 (in the U.S.). Our Customer Service Staff
your body in shape and achieving a happier and is available to assist you from 7:30 A.M. to 5:00 P.M.
healthier lifestyle.
(Central Time) Monday through Thursday and 8:00
Before reading further, please review the A.M. to 3:00 P.M. (Central Time) on Friday.
drawing below and familiarize yourself with the
parts that are labeled.
Be sure to have the name and model number of
the product available when you contact us.
Read this manual carefully before using the
AVARI® Conversion II Rower Recumbent Bike.
Meter
Meter Post
Handlebar
Top Cover
Right Cover
Crank Cover
Tension Knob
Right Pedal Strap
Right Pedal
Pulse Sensor Plate
Seat
Front Stabilizer
Back Cushion
Seat Carriage
Rail
Endcap
Foot Pedal
Main Frame
Handrail
Caution Label
Endcap
Rear Support
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY :
Phillips Screwdriver
Adjustable Wrench
Adjustable Wrench
Allen Wrench (6mm)(2 Wrenches Included)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUIPMENT WARNING, CAUTION & NOTICE LABELS
This chart is provided to help identify the warning, caution, and notice labels on the AVARI®
Conversion II Rower Recumbent Bike. Please take a moment to familiarize yourself with all of the
warning, caution, and notice labels.
Label is larger than actual size
C1 CAUTION LABEL(115)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers or
the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to
check the length of the bolts and screws.
3/16"
1/4"
5/16"
3/8"
1/2"
INCHES
0
0
1/2
1
1/2
2
1/2
3
1/2
4
1/2
5
1/2
6
in.
mm.
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
length
MILLIMETERS
6
8
10
12
NOTICE: The length of all bolts and screws, except those with flat
heads, is measured from below the head to the end of the bolt
or screw. Flat head bolts and screws are measured from the
top of the head to the end of the bolt or screw.
length
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
Part No. and Description
Qty
81
84
Carriage Bolt (M8 x 1.25 x 70mm)
Screw, Round Head (M5 x 18mm)
2
1
94
114
Bolt, Button Head (M8 x 1.25 x 15mm)
Bolt, Button Head (M8 x 1.25 x 12mm)
3
4
95
96
97
Bolt, Hex Head (M6 x 1 x 15mm)
Bolt, Hex Head (M6 x 1 x 30mm)
Bolt, Hex Head (M8 x 1.25 x 16mm)
4
4
4
101
102
103
Bolt, Hex Head (M10 x 1.5 x 85mm)
Bolt, Hex Head (M10 x 1.5 x 95mm)
Bolt, Hex Head (M10 x 1.5 x 125mm)
1
1
1
104
105
Nylock Nut (M8 x 1.25)
Nylock Nut (M10 x 1.5)
2
3
109
Large Washer (M8 x ø23 )
2
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at [email protected], or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
NOTE: Don’t remove or damage the DECAL(111) located on the top of the MAIN FRAME(1). The
DECAL(111) is for preventing the SENSOR WIRE(29) and the PULSE CONNECTION WIRE(75)
from dropping into the MAIN FRAME(1).
STEP 1: There is an “R” decal on one end of the FRONT STABILIZER(2).Attach the FRONT STABILIZER
(2) to the MAIN FRAME(1) with the “R” decal end at right side and secure with CARRIAGE BOLTS
(M8x1.25x70mm)(81) and NYLOCK NUTS(M8x1.25)(104).
STEP 2: Insert the STOPPER TUBE(48) through the MAIN FRAME(1) and secure with BUTTON HEAD
BOLT(M8x1.25x15mm)(94).
NOTE: The PEDAL STRAPS(47) are pre-assembled and attached to the FOOT PEDALS(46). The pedal
and strap assembly for the left side has an “L” decal. The pedal and strap assembly for the right
side has an “R” decal.
STEP 3: Insert the PEDAL SHAFT(44) through the MAIN FRAME(1). Place the RIGHT FOOT
PEDAL ASSEMBLY(46R) onto the right end of the PEDAL SHAFT(44) and place the LEFT FOOT
PEDAL ASSEMBLY(46L) onto the left end. Secure the FOOT PEDALS with BUTTON HEAD BOLTS
(M8x1.25x15mm)(94) and LARGE WASHERS(M8)(109) at both ends of the PEDAL SHAFT(44).
NOTE: You need to use two Allen Wrenches to tighten the BUTTON HEAD BOLTS(M8x1.25x15mm)(94)
at both ends of the PEDAL SHAFT(44) at the same time.
R
L
R
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 4
Attach the SUPPORT BRACKET(60) to the RAIL(52) with HEX BOLTS(M8x1.25x16mm)(97). Press the
NUT CAPS(79) onto NYLOCK NUT(M10x1.5)(105) and HEX BOLT(M10x1.5x75mm)(100).
STEP 5
Attach the RAIL(52) to the MAIN FRAME(1) by sliding the RAIL PIVOT(49) into the bracket on the MAIN
FRAME(1) and securing with HEX BOLT(M10x1.5x125mm)(103) and NYLOCK NUT(M10x1.5)(105).
Press the NUT CAPS(79) onto HEX BOLT(M10x1.5x125mm)(103) and NYLOCK NUT(M10x1.5)(105).
STEP 6
Connect the lower end of the SUPPORT TUBE(56) to the MAIN FRAME(1) with HEX BOLT(M10x1.5x85mm)
(101) and NYLOCK NUT(M10x1.5)(105). Press the NUT CAPS(79) onto HEX BOLT(M10x1.5x85mm)
(101) and NYLOCK NUT(M10x1.5)(105).
STEP 7
Attach the REAR SUPPORT(62) to the REAR SUPPORT BRACKET(61) located on the RAIL(52) with
HEX BOLT(M10x1.5x95mm)(102) and NYLOCK NUT(M10x1.5)(105). Lock the REAR SUPPORT(62) in
position with the PULL PIN(63). Press the NUT CAPS(79) onto HEX BOLT(M10x1.5x95mm)(102) and
NYLOCK NUT(M10x1.5)(105).
(100) BOLT
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
NOTE: Be careful not to damage the PULSE SENSOR WIRE(73) or PULSE COIL WIRE(74) during
assembly steps 8, 9, and 10.
STEP 8
Attach the HANDRAIL(70) to the SEAT CARRIAGE(64) with BUTTON HEAD BOLTS(M8x1.25x12mm)
(114).
STEP 9
Attach the SEAT(68) to the SEAT CARRIAGE(64) with HEX BOLTS(M6x1x15mm)(95). Attach the BACK
CUSHION(69) onto the SEAT CARRIAGE(64) with HEX BOLTS(M6x1x30mm)(96).
STEP 10
Turn the knob of the SPRING PIN(67) counterclockwise and lock the knob in the release position, refer to
the inset drawing. Slide the SEAT CARRIAGE ASSEMBLY(64) into the RAIL(52).
Press the RAIL CAP(55) into the back end of the RAIL(52). Insert the STOPPER BOLT(54) through the
RAIL(52) and RAIL CAP(55) to bolt them together with the STOPPER(53). Please verify that the other
STOPPER BOLT(54) at the front end of RAIL(52) was assembled at the factory.
Release
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 11
NOTE: The RIGHT PEDAL(41) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(41) has
right hand threads and is tightened by turning clockwise. The LEFT PEDAL(39) has L stamped on
the end of the pedal shaft. The LEFT PEDAL(39) has left hand threads and is tightened by turning
counterclockwise.
Thread the RIGHT PEDAL(41) into the RIGHT CRANK(37) located inside the CRANK COVER(35) as
shown. Tighten the pedal securely. Select the RIGHT PEDAL STRAP(42) which has R marked on the
bottom side of the strap. Snap the three hole end onto the inside edge of the RIGHT PEDAL(41). Snap the
other end onto the outside edge of the RIGHT PEDAL(41) with the R mark on the bottom of the RIGHT
PEDAL STRAP(42). Select adjustment holes which allow your foot to be easily removed from the pedals.
Repeat on the left side in order to attach the LEFT PEDAL(39) to the LEFT CRANK(36) and snap the LEFT
PEDAL STRAP(40) onto the LEFT PEDAL(39).
STEP 12
Refer to the inset drawing. Plug the PULSE SENSOR WIRE(73) into the socket of PULSE COIL WIRE(74)
located on the SEAT CARRIAGE(64). Plug the PULSE COIL WIRE(74) into the socket of PULSE
CONNECTION WIRE(75) located on the bracket on the MAIN FRAME(1).
Socket
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 13
Insert the SENSOR WIRE(29) and PULSE CONNECTION WIRE(75) into the bottom end of METER
POST(31) and pull them out of the top of the METER POST(31). Pull the HANDLEBAR(25), twist the
STRAP(21) and slide the strap thru the gap into the hole in the bottom of the METER POST(31). Slide the
METER POST(31) onto the MAIN FRAME(1) and secure with SCREW(M5x18mm)(84).
STEP 14
Install two AA batteries into the METER(30), the batteries are not included. See page 13 for detailed
battery installation instructions. Plug the SENSOR WIRE(29) and PULSE CONNECTION WIRE(75) into
the METER(30) and push the excess wires back into the METER POST(31). Place the METER(30) on the
plate on the METER POST(31), then slide it down to lock in position.
NOTE: Please be careful not to damage the Sensor Wires when attaching the METER(30).
Gap
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP INSTRUCTIONS
Place the AVARI® Conversion II Rower Recumbent Bike in the area where it will be used. It is
recommended that the AVARI® Conversion II Rower Recumbent Bike be placed on an equipment
mat. The AVARI® Conversion II Rower Recumbent Bike is approximately 77 inches long x 23 inches
wide x 33.5 inches tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 8.5 feet
long is required for safe operation of the AVARI® Conversion II Rower Recumbent Bike. Make sure
that adequate space is available for access to and passage around the AVARI® Conversion II Rower
Recumbent Bike.
LEVELING: Adjust the location of AVARI® Conversion II Rower Recumbent Bike so the bike sits on
the floor without rocking.
MOVING: The AVARI® Conversion II Rower Recumbent Bike has a pair of MOVING WHEELS(76)
on the FRONT STABILIZER(2). Grasp the RAIL CAP(55) to move the AVARI® Conversion
II Rower Recumbent Bike.
Equipment Mat
(not included)
FUNCTION INSPECTION:
Visually inspect the AVARI® Conversion II Rower Recumbent Bike to verify that assembly is as shown
in the above illustration. Check the function of the AVARI® Conversion II Rower Recumbent Bike by
turning the crank slowly through one complete revolution to verify that the drive train functions properly.
Adjust the TENSION KNOB(27) and verify that it functions properly.
CAUTION: Locate and read the CAUTION LABEL(115) on the AVARI® Conversion II Rower
Recumbent Bike. Make sure that all users read the CAUTION LABEL(115) before using the
product.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
Pedal movement or push the MODE button.
POWER ON:
POWER OFF:
Automatic shut off after 4 minutes of inactivity.
MODE BUTTON: Press and release to select functions.
Press and hold for three seconds to reset
all functions to zero, except ODOMETER.
FUNCTIONS:
Automatically scans SPEED, DISTANCE,
TIME, ODOMETER, CALORIE, and PULSE
in sequence with a change every six seconds.
Press and release the MODE button until the
arrow points to “SCAN”.
SCAN:
Displays the current speed, from zero to 999.9 Mile/Hr.
Displays distance, from the time the meter is turned on, to 999.9 miles.
Displays the time, from 1 sec. up to 99:59 minutes.
SPEED:
DISTANCE:
TIME:
ODOMETER: Displays the total accumulated distance you have traveled, from zero to 999.9 miles. The
total accumulated distance is retained when the meter is turned off.
Displays the calorie consumption, from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
Displays your pulse rate in beats per minute. To display pulse, select the PULSE MODE
and grasp the pulse sensors on the handlebars, one in each hand. The heart icon will
begin flashing when the ELECTRONIC METER senses your pulse. Your pulse will be
displayed approximately five (5) seconds after the heart icon is displayed. If the heart icon
does not appear, relax your grip or change your grip on the pulse sensors.
CALORIE:
PULSE:
NOTE: 1. The function mark “M” in bottom-right on the LCD display means the electronics reading is
in Miles. A “K” indicates Kilometers. To change the function mark from “M” to “K” or “K”
to “M”, press the MODE button and hold it down for five seconds until the second beep.
2. The meter will shut off automatically after 4 minutes of inactivity. All function values will
be kept. Press the MODE button and hold it down for three seconds to reset all functions
to zero, except ODOMETER.
3. The ODOMETER will be reset to zero after batteries are removed for battery replacement
or storage of the unit.
AA Batteries
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the meter.
2. The meter operates with two AA batteries, the batteries are not
included. Refer to the illustration to install or replace the batteries.
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
3. Rechargeable batteries are not recommended.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
RECUMBENT BIKE MODE AND ROWER MODE
Your AVARI® Conversion II Rower Recumbent Bike can be used in the Recumbent Bike mode or
the Rower mode. When the SPRING PIN(67) locks the SEAT ASSEMBLY to the RAIL(52), the AVARI®
Conversion II Rower Recumbent Bike is in the Recumbent Bike mode. When the SPRING PIN(67) is
in the Release position, the SEAT ASSEMBLY is not locked to the RAIL(52) and the AVARI® Conversion
II Rower Recumbent Bike is in the Rower mode.
RECUMBENT BIKE MODE: Pull the knob on
the SPRING PIN(67), turn it clockwise and release
the knob to allow it to lock the seat in position. Sit
on the seat and pedal with the PEDALS(39, 41).
ROWER MODE: Pull the knob on the SPRING
PIN(67) and turn it counterclockwise to lock it in the
release position. Refer to the inset drawing. This will
allow the SEAT ASSEMBLY to slide freely on the
RAIL(52). To work out, sit on the seat, secure your
feet in the FOOT PEDALS(46) with the PEDAL
STRAPS(47) and pull on the HANDLEBAR(25).
NOTE: If the FRONT STABILIZER(2) raises off the
floor during use, adjust the STAND(43) to a
higher position. The STAND(43) is located
on the bottom of the MAIN FRAME(1).
CAUTION: Always verify that the SPRING PIN(67)
is in the correct position before you
begin your workout.
Release
SEAT ADJUSTMENT
Proper seat adjustment is important for Recumbent Bike mode.
1. Pull the knob on the SPRING PIN(67) and slide the SEAT ASSEMBLY forward or backward to adjust the
seat. Release the knob on the SPRING PIN(67) and make sure it is inserted into one of the adjustment
holes in the RAIL(52).
2. Sit on the seat and place your feet on the
pedals. You should be able to move through
a complete pedal stroke without locking your
knees or shifting your hips on the seat. The seat
is too close to the pedals if you have more than
a slight bend in your knees at the bottom of the
pedal stroke. The seat is too far from the pedals
if you have to completely straighten your knees
at the bottom of the pedal stroke. Refer to the
illustrations below.
WARNING: Do not attempt to adjust the seat while
you are on the AVARI® Conversion II
Rower Recumbent Bike.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB(27) clockwise. To
decrease the load, turn the TENSION KNOB(27) counterclockwise.
There are eight levels for the load adjustment.
NOTE: The load will increase as you pedal faster.
MAINTENANCE
The safety and integrity designed into the AVARI® Conversion II Rower Recumbent Bike can only be
maintained when the AVARI® Conversion II Rower Recumbent Bike is regularly examined for damage
and wear. Special attention should be given to the following:
1. Adjust the TENSION KNOB(27) and verify that the Magnetic System provides tension. The Magnetic
System should provide many years of use.
2. Clean the roller tracks in the RAIL(52) with an absorbent cloth.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten
loose nuts and bolts.
4. Verify that the CAUTION LABEL(115) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(115) if it is missing or damaged.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components shall be replaced immediately or the AVARI® Conversion II Rower
Recumbent Bike removed from service until repair is made.
7. Only Stamina Products supplied components shall be used to maintain/repair the AVARI® Conversion
II Rower Recumbent Bike.
8. Keep your AVARI® Conversion II Rower Recumbent Bike clean by wiping it off with an absorbent
cloth after use.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE
1. To store the AVARI® Conversion II Rower Recumbent Bike, simply keep it in a clean dry place.
2. To avoid damage to the electronics, remove the battery before storing the AVARI® Conversion II
Rower Recumbent Bike for one year or more.
3. Move the AVARI® Conversion II Rower Recumbent Bike with the MOVING WHEELS(76) on
the FRONT STABILIZER(2). Grasp the RAIL CAP(55) to move the AVARI® Conversion II Rower
Recumbent Bike. Do not use the Seat to move the AVARI® Conversion II Rower Recumbent Bike.
The Seat will move and the Seat Carriage may pinch your hand or fingers.
4. The minimum folded dimensions of the AVARI® Conversion II Rower Recumbent Bike are
approximately 33.2 inches long x 23 inches wide x 58.2 inches tall. Please measure your AVARI®
Conversion II Rower Recumbent Bike if exact dimensions are needed.
5. Follow the illustrated process below to fold the AVARI® Conversion II Rower Recumbent Bike.
a. Adjust and lock the seat in position with at least one adjustment hole visible in front of the seat.
NOTE: This will prevent the seat from damaging the covers.
b. Remove the PULL PIN(63) and swing the REAR SUPPORT(62) toward the front.
NOTE: This will allow you to pull out the RELEASE KNOB(59) easily.
c. Pull out the RELEASE KNOB(59) and fold up the RAIL(52). Make sure the RAIL(52) is locked securely
in folded position by RELEASE KNOB(59).
d. Lock the REAR SUPPORT(62) in folded position with the PULL PIN(63).
A
D
C
Grasp Here
To Move
B
UNFOLD THE AVARI® Conversion II Rower Recumbent Bike
a. Pull out the RELEASE KNOB(59) and unfold the RAIL(52). Make sure the RAIL(52) is locked securely
in the unfolded position by RELEASE KNOB(59).
b. Remove the PULLPIN(63) and swing the REAR SUPPORT(62) backward, then lock the REAR SUPPORT
(62) in position with the PULL PIN(63).
A
B
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
How you begin your exercise program depends on your physical condition. If you have been inactive for
several years or are severely overweight, start slowly and increase your workout time gradually. Increase
your workout intensity gradually by monitoring your heart rate while you exercise.
Remember to follow these essentials:
Have your doctor review your training and diet programs.
Begin your training program slowly with realistic goals that have been set by you and your physician.
Warm up before you exercise and cool down after you work out.
Take your pulse periodically during your workout and strive to stay within a range of 60% (lower
intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity, and
build up to higher intensity as you become more aerobically fit.
If you feel dizzy or lightheaded you should slow down or stop exercising.
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise
so you don't tire too quickly.
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table
below. For effective aerobic exercise, your heart rate should be maintained at a level between 60%
and 90% of your maximum heart rate. If just starting an exercise program, work out at the low end of
your target heart rate zone. As your aerobic capacity improves, gradually increase the intensity of your
workout by increasing your heart rate.
Measure your heart rate periodically during your workout by stopping the
exercise but continuing to move your legs or walk around. Place two or
three fingers on your wrist and take a six second heartbeat count. Multiply
the results by ten to find your heart rate. For example, if your six second
heartbeat count is 14, your heart rate is 140 beats per minute. A six second
wrist pulse
count is used because your heart rate will drop rapidly when you stop
exercising. Adjust the intensity of your exercise until your heart rate is at the
proper level.
Target Heart Rate Zone Estimated by Age*
Target Heart Rate Zone
(55%-90% of Maximum Heart Rate)
Average Maximum
Heart Rate 100%
Age
20 years
25 years
30 years
35 years
40 years
45 years
50 years
55 years
60 years
65 years
70 years
110-180 beats per minute
107-175 beats per minute
105-171 beats per minute
102-166 beats per minute
99-162 beats per minute
97-157 beats per minute
94-153 beats per minute
91-148 beats per minute
88-144 beats per minute
85-139 beats per minute
83-135 beats per minute
200 beats per minute
195 beats per minute
190 beats per minute
185 beats per minute
180 beats per minute
175 beats per minute
170 beats per minute
165 beats per minute
160 beats per minute
155 beats per minute
150 beats per minute
* For cardiorespiratory training benefits, the American College of Sports Medicine recommends
working out within a heart rate range of 55% to 90% of maximum heart rate. To predict the
maximum heart rate, the following formula was used: 220 - Age = predicted maximum heart rate
17
Download from Www.Somanuals.com. All Manuals Search And Download.
WARM-UP and COOL-DOWN
The purpose of warming up is to prepare your body for exercise and to minimize injuries.
Warm-Up
Warm up for two to five minutes before strength training or aerobic exercising. Perform activities that
raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging,
jumping jacks, jump rope, and running in place
Stretching while your muscles are warm after a proper warm-up and again after your
Stretching
strength or aerobic training session is very important. Muscles stretch more easily at these times
because of their elevated temperature, which greatly reduces the risk of injury. Stretches should be held
for 15 to 30 seconds. Do not bounce.
Suggested Stretching Exercises
Lower Body Stretch
Place feet shoulder-width
apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs.
Floor Stretch
While sitting on the floor,
open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds.
DO NOT BOUNCE!
When the pull on the back of
the legs lessens, gradually
try a lower position.
DO NOT BOUNCE!
Do this stretch 10 times.
Repeat the stretch with the
left leg.
Bent Torso Pulls
Bent Over Leg Stretch
Stand with feet shoulder-
width apart and lean forward
as illustrated. Using the
arms, gently pull the upper
body towards the right leg.
Let the head hang down.
DO NOT BOUNCE!
While sitting on the floor,
have legs apart, one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent, and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.
Hold the position a minimum
of 10 seconds. Repeat
pulling the upper body to
the left leg. Do this stretch
several times slowly.
Remember to always check with your physician before starting any exercise program.
The purpose of cooling down is to return the body to its normal, or near normal, resting
Cool-Down
state at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows
blood to return to the heart. Your cool-down should include the stretches listed above and should be
completed after each strength training session.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
MODEL A150-335
WARRANTY
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on the parts and three years on
the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL
NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE,
MISUSE, ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY
REPAIR, REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED
BY STAMINA PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health
clubs, spas, gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the
product's use is in furtherance of a profit making enterprise, and all other use which is not for personal,
family, or household purposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase
and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071,
call us at 1-800-375-7520. If the defect is covered under this limited warranty, you will be requested to
return the product or part to us for free repair or replacement at our option. NO ACTION FOR BREACH
OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER THE
DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED. NO ACTION FOR
BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER
DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not transferable. IF
ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED WARRANTY OR ANY
IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY
AVAILABLE TO YOU. In the event that the purchaser makes any claim under this limited warranty or any
implied warranty, the Warrantor reserves the right to require the product to be returned for inspection,
at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of the enclosed
warranty registration card is not required for warranty coverage, but is merely a way of establishing the
date and place of purchase.
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS
OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,
SPECIAL OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY
IMPLIED WARRANTY.
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This
warranty gives you specific legal rights, and you may also have other legal rights which vary from state
to state. ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO
THE DURATION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods
to disclaim or limit implied warranties and consequential and incidental damages with respect thereto.
If any such law is found to be applicable, the foregoing disclaimers and limitations of and on implied
warranties and consequential and incidental damages with respect thereto shall be disregarded and shall
be deemed not to have been made to the extent necessary to comply with such legal restriction.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
PART#
PART NAME
QTY
1
2
3
4
5
6
7
8
Main Frame
Front Stabilizer
Axle
1
1
1
1
1
1
2
4
2
2
1
1
1
1
1
1
1
3
3
3
1
1
1
2
1
2
1
1
1
1
1
1
1
1
2
1
1
3
1
1
1
1
1
1
2
2
2
1
1
2
1
1
2
2
1
1
1
Pulley
Strap Wheel
Connection Wheel
Free Wheel
Bearing (6004 zz)
C Ring (20mm)
Bearing Housing
V-Ribbed Belt
Idler Arm
Idler Wheel
Idler Wheel Spacer
Tension Spring
Magnetic System
Bungee Cord
Bungee Wheel
Wheel Bushing
Wheel Spacer
Strap
Strap Roller
Roller Axle
Roller Spacer
Handlebar
Foam Grip
Tension Knob
Magnet
Sensor Wire
Meter
Meter Post
Top Cover
Left Cover
Right Cover
Crank Cover
Left Crank
Right Crank
Flange Bolt (M8 x 1.25 x 25mm)
Left Pedal
Left Pedal Strap
Right Pedal
Right Pedal Strap
Stand
Pedal Shaft
Spacer
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
Foot Pedal
Pedal Strap
Stopper Tube
Rail Pivot
Pivot Bushing
Rail Connection Cap
Rail
Stopper
Stopper Bolt
Rail Cap
Support Tube
Inner Support Tube
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
PART#
PART NAME
QTY
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
Bushing
Release Knob
Support Bracket
Rear Support Bracket
Rear Support
Pull Pin
Seat Carriage
Seat Roller
Seat Roller Spacer (ø8 x ø12 x 6.5mm)
Spring Pin
Seat
Back Cushion
Handrail
Foam Grip
Pulse Sensor Plate
Pulse Sensor Wire
Pulse Coil Wire
1
1
1
1
1
1
1
4
4
1
1
1
1
2
2
1
1
1
2
4
6
8
3
2
5
2
5
1
4
12
4
4
2
1
4
2
3
4
4
8
4
1
1
1
1
1
10
5
2
2
7
2
2
1
2
1
4
1
Pulse Connection Wire
Moving Wheel
Round Endcap (60mm)
Round Plug (25mm)
Nut Cap (M10)
Carriage Bolt (M8 x 1.25 x 60mm)
Carriage Bolt (M8 x 1.25 x 70mm)
Screw, Round Head (M4 x 20mm)
Screw, Round Head (M4 x 25mm)
Screw, Round Head (M5 x 18mm)
Screw, Round Head (M5 x 0.8 x 15mm)
Screw, Round Head (M5 x 0.8 x 18mm)
Bolt, Socket Head (M5 x 0.8 x 15mm)
Bolt, Round Head (M6 x 1 x 15mm)
Bolt, Round Head (M6 x 1 x 30mm)
Bolt, Flat Head (M8 x 1.25 x 16mm)
Bolt, Flat Head (M8 x 1.25 x 25mm)
Bolt, Flat Button Head (M8 x 1.25 x 25mm)
Bolt, Button Head (M6 x 1 x 12mm)
Bolt, Button Head (M8 x 1.25 x 15mm)
Bolt, Hex Head (M6 x 1 x 15mm)
Bolt, Hex Head (M6 x 1 x 30mm)
Bolt, Hex Head (M8 x 1.25 x 16mm)
Bolt, Hex Head (M8 x 1.25 x 55mm)
Bolt, Hex Head (M10 x 1.5 x 45mm)
Bolt, Hex Head (M10 x 1.5 x 75mm)
Bolt, Hex Head (M10 x 1.5 x 85mm)
Bolt, Hex Head (M10 x 1.5 x 95mm)
Bolt, Hex Head (M10 x 1.5 x 125mm)
Nylock Nut (M8 x 1.25)
Nylock Nut (M10 x 1.5)
Flange Nut (M10 x 1.25)
Washer (M6)
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
Washer (M8 x ø16 )
Large Washer (M8 x ø23 )
Washer (M10)
Decal
Allen Wrench (6mm)
Manual
Bolt, Button Head (M8 x 1.25 x 12mm)
Caution Label
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TO CONTACT CUSTOMER SERVICE
For your convenience, Stamina’s customer service representatives can be reached by email at customerservice@
staminaproducts.com or by phone at 1-800-375-7520 (in the U.S.). Our customer service representatives are available Monday
through Thursday from 7:30 a.m. until 5:00 p.m., and Friday 8:00 a.m. until 3 p.m. Central Time.
ONLINE
TELEPHONE
FAX
MAIL
CUSTOMER SERVICE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
CUSTOMER SERVICE
Fax: (417) 889-8064
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071 Springfield, MO. 65801-1071
Would you like to recieve email information or special offers from Stamina Products? Register at contact.staminaproducts.com
TO REGISTER YOUR PRODUCT
To enact your warranty, please register your product by going to register.staminaproducts.com. Please have your product model
number (printed on the cover of this owner’s manual) and the serial number (printed on the black and white sticker on your
product) ready.
If you don’t have internet access, you can call customer service at 1-800-375-7520, or fill out and mail the product registration
form below to Stamina Products, Inc.; P.O. Box 1071; Springfield, MO 65801-1071.
PRODUCT REGISTRATION FORM
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Model Number: ......................................................................................
Serial Number: .............................................................................................
Product Name: ..................................................................................................................................................................................................................................
Place Purchased: ..............................................................................................................................................................................................................................
Date of Purchase: ..................................................................................
Purchase Price: ............................................................................................
Last Name: ...................................................................................................
State: ................................................................ Zip Code: .................................................
First Name: ............................................................................................
City: ..................................................................
Email Address: .......................................................................................
Phone #: (
) ......................................................................................
*If yes, be sure your email address is included above.
Would you like to receive email information or special offers from Stamina Products?* ____Yes ____No
Detach and Mail or Fax the Form Above
TO ORDER PARTS
If there are missing or damaged parts, you can go to parts.staminaproducts.com and order those parts. If you have questions,
please contact customer service. Do not return the product. To order parts by mail, fill out the sheet below and fax it to
417-889-8064. The part will be mailed to your address.
Detach and Mail or Fax the Form Below
PARTS ORDER FORM
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Mr./Ms: ..............................................................................................................................................................................................................................................
Address: .....................................................................................................................................
City: .................................................................. State: ................................................................
IMPORTANT : We must have your phone number to process the order!
) ................................................................................ Work Phone #: (
Date of Purchase: ..................................................................................
Apt. #:..........................................................................
Zip Code: .................................................
Phone #: (
) .............................................................................
Model #: ............................................................................................................................................................................................................................................
Purchased From: ..............................................................................................................................................................................................................................
IMPORTANT : Before filling out the form below make sure you have the correct information.
Refer to the parts list to make sure you're ordering the right parts!
PART #
DESCRIPTION
QUANTITY
1
EXAMPLE:
1
Rear Unit Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|