Magnetic Elliptical
Owner's Manual
!
WARNING
Exercise can present a
health risk. Consult a
physician before beginning
any exercise program with
this equipment. If you feel
faint or dizzy, immediately
discontinue use of this
equipment. Serious bodily
injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur
if all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
securely tightened prior to
each use. Follow all safety
instructions in this manual.
When calling for parts or
service, please specify
the following number:
Product May Vary Slightly From Pictured.
Model#: A550-090
CAUTION:
Weight on this product should not exceed 250 lbs.
This Product is Distributed Exclusively by
STAMINA PRODUCTS
MADE IN CHINA
2040 N. Alliance, Springfield, MO 65803
Customer Service
2012 Stamina Products, Inc.
2012, 08
©
1 (800) 375-7520
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Us First
1C(8us0t0om)3er7S5e-r7v5ic2e0
THANK YOU FOR PURCHASING THE
AVARI® Magnetic Elliptical
To enact your warranty, please register your product
by going to register.staminaproducts.com
To help you get started, we have pre-assembled most of your
AVARI® Magnetic Elliptical at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
With regular workouts, you will be getting your body into shape
and be on your way to achieving a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.
Friday, 8:00 A.M. - 3:00 P.M., Central Time.
ONLINE
TELEPHONE
FAX
MAIL
CUSTOMER SERVICE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
CUSTOMER SERVICE
Fax: (417) 889-8064
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for choosing the AVARI® Magnetic
Although Stamina constructs its products with
Elliptical. We take great pride in producing this the finest materials and uses the highest standards
quality product and hope it will provide many hours of manufacturing and quality control, there can
of quality exercise to make you feel better, look sometimes be missing parts or incorrectly sized
better, and enjoy life to its fullest.
parts. If you have any questions or problems with
It's a proven fact that a regular exercise program the parts included with your AVARI® Magnetic
can improve your physical and mental health. Elliptical, please do not return the product.
Too often, our busy lifestyles limit our time and Contact us FIRST!
opportunity to exercise. The AVARI® Magnetic
Elliptical provides a convenient and simple
method to begin your journey of getting your body
in shape and achieving a happier and healthier
lifestyle.
Before reading further, please review the
drawing below and familiarize yourself with the
parts that are labeled.
If a part is missing or defective, please go to
staminaproducts.com under the Service section
and order the part needed, or call us toll free
at 1-800-375-7520 (in the U.S.). Our Customer
Service Staff is available to assist you from 7:30
A.M. to 5:00 P.M. (Central Time) Monday through
Thursday and 8:00 A.M. to 3:00 P.M. (Central
Time) on Friday.
Read this manual carefully before using the
AVARI® Magnetic Elliptical.
Be sure to have the name and model number of
the product available when you contact us.
Meter
Pulse Sensor
Stationary Handlebar
Right Handlebar
Tension Knob
Left Handlebar
Pivoting Arm
Upright
Pivoting Arm
Main Frame
Front Stabilizer
Endcap
Right Cover
Pedal Arm Connector
Leveling Cap
Pedal Arm
Left Pedal Cap
Left Cover
Crank
Warning Label
Rear Stabilizer
THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY :
Wrench
Allen Wrench (6mm)
Allen Wrench (8mm)
Combination Wrench
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUIPMENT WARNING, CAUTION & NOTICE LABELS
This chart is provided to help identify the warning, caution, and notice labels on the AVARI®
Magnetic Elliptical. Please take a moment to familiarize yourself with all of the warning, caution, and
notice labels.
Label is larger than actual size
W1 WARNING LABEL(78)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers or
the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to
check the length of the bolts and screws.
3/16"
1/4"
5/16"
3/8"
1/2"
INCHES
0
1/2
1
1/2
2
1/2
3
1/2
4
1/2
5
1/2
6
in.
mm.
0
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
length
MILLIMETERS
6
8
10
12
NOTICE: The length of all bolts and screws, except those with flat
heads, is measured from below the head to the end of the bolt
or screw. Flat head bolts and screws are measured from the
top of the head to the end of the bolt or screw.
length
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
Part No. and Description
Qty
13
Shoulder Bolt (ø15.9x77mm, M10x1.5 threaded)
2
19
Carriage Bolt (M8 x 1.25 x 60mm)
4
55
67
Bolt, Button Head (M8 x 1.25 x 25mm)
Bolt, Button Head (M8 x 1.25 x 15mm)
6
3
62
63
Bolt, Button Head (M6 x 1 x 40mm)
Bolt, Button Head (M8 x 1.25 x 45mm)
4
4
37
Arc Washer (M8)
6
46
60
68
Washer (ø10 x ø19 x 2mm thick)
Washer (M10 x ø21 x 1.5mm thick)
Washer (M8)
2
2
7
57
Acorn Nut (M8 x 1.25)
4
33
47
72
Nylock Nut (M6 x 1)
Nylock Nut (M10 x 1.5)
Thin Nylock Nut (M8 x 1.25 x 6mm thick)
4
4
4
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at [email protected], or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the FRONT STABILIZER(4), the shorter stabilizer with the ENDCAPS(52), to the front of the
MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x60mm)(19), WASHERS(M8)(68), and ACORN
NUTS(M8x1.25)(57).
STEP 2
Attach the REAR STABILIZER(77), the stabilizer with the LEVELING CAPS(18), to the MAIN FRAME(1)
with CARRIAGE BOLTS(M8x1.25x60mm)(19), WASHERS(M8)(68), and ACORN NUTS(M8x1.25)(57).
NOTE:You can adjust the LEVELING CAPS(18) on the REAR STABILIZER(77) to keep the AVARI®
Magnetic Elliptical stable.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 3
Refer to the inset drawing and the illustration below to connect the TENSION KNOB(8) to the TENSION
CABLE(17) and assemble the UPRIGHT(2):
1. Set the TENSION KNOB(8) at position “8”, so the CABLE END extends out of the METAL FITTING
as far as possible. Connect the CABLE END of the TENSION KNOB(8) to the HOOK on the end of the
TENSION CABLE(17).
2. Pull on the Cable of the TENSION KNOB(8) firmly so that enough cable is available to allow the METAL
FITTING to go through the slot in the top of the BRACKET.
3. Insert the METAL FITTING into the hole at the end of the slot in the BRACKET.
4. Adjust the TENSION KNOB(8) and verify that the HOOK moves when the TENSION KNOB(8) is adjusted.
5. Connect the EXTENSION WIRE(58) to the SENSOR WIRE(38).
6. InserttheUPRIGHT(2)intotheMAINFRAME(1)andsecurewithBUTTONHEADBOLTS(M8x1.25x25mm)
(55) and ARC WASHERS(M8)(37).
Metal Fitting
Cable End
1
Hook
Bracket
2
3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 4
Place a SPACER(61) on each side of the SHAFT on the UPRIGHT(2). Slide the PIVOTING ARMS(71)
onto the SHAFT on the UPRIGHT(2) on both sides and secure with SECURING CAPS(49), WASHERS
(ø10xø19x2mm thick)(46), and NYLOCK NUTS(M10x1.5)(47).
STEP 5
Slide the lower end of the PIVOTING ARM(71) into the bracket on the PEDAL ARM(9), and secure with
the SHOULDER BOLT(ø15.9x77mm, M10x1.5 threaded)(13), WASHER(M10xø21x1.5mm thick)(60),
and NYLOCK NUT(M10x1.5)(47). Refer to the Section View. Make sure the shoulder of the SHOULDER
BOLT(ø15.9x77mm, M10x1.5 threaded)(13) is fully gone through the holes of the bracket on the PEDAL
ARM(9) before tightening the NYLOCK NUT(M10x1.5)(47). Repeat to attach the opposite side.
Shoulder
Bracket
SECTION VIEW
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 6
There is a “L” decal on the LEFT HANDLEBAR(3), and a “R” decal on the RIGHT HANDLEBAR(5). Insert
the LEFT HANDLEBAR(3) into the PIVOTING ARM(71) on the left side and secure with BUTTON HEAD
BOLTS(M6x1x40mm)(62) and NYLOCK NUTS(M6x1)(33). Repeat on the right side.
STEP 7
There is a “L” decal on the LEFT PEDAL CAP(30), and a “R” decal on the RIGHT PEDAL CAP(31).
Attach the LEFT PEDAL CAP(30) to the PEDAL ARM(9) on the left side with BUTTON HEAD
BOLTS(M8x1.25x45mm)(63) and NYLOCK NUTS(M8x1.25)(72). Repeat on the right side.
NOTE: The LEFT and RIGHT PEDAL CAPS(30, 31) have a raised lip on three sides. Attach the LEFT
and RIGHT PEDAL CAPS(30, 31) to the PEDAL ARMS(9) so that the side without the raised lip
is on the outside.
R
L
R
L
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 8
To assemble the STATIONARY HANDLEBAR(10), run the PULSE SENSOR WIRES(64) through the hole
on the UPRIGHT(2) and through the opening on the top. Attach the STATIONARY HANDLEBAR(10) to
the UPRIGHT(2) with BUTTON HEAD BOLTS(M8x1.25x15mm)(67) and WASHERS(M8)(68).
STEP 9
Install two AA batteries into the METER(15), the batteries are not included. See page 14 for detailed
battery installation instructions. Plug the EXTENSION WIRE(58) and PULSE SENSOR WIRES(64) into
the METER(15), and push the excess wires back into the UPRIGHT(2). Slide the METER(15) onto the top
of the UPRIGHT(2).
NOTE: Be careful not to damage the wires when attaching the METER(15) to the UPRIGHT(2).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP INSTRUCTIONS
Place the AVARI® Magnetic Elliptical in the area where it will be used. It is recommended that the AVARI®
Magnetic Elliptical be placed on an equipment mat. The maximum operation dimensions of the AVARI®
Magnetic Elliptical are approximately 46.9 inches long x 22 inches wide x 59.1 inches tall. (These dimensions
may vary up to one inch.) Make sure that adequate space is available for access to move around and
emergency dismount from the AVARI® Magnetic Elliptical. A minimum of 20 inches on at least one side
and 20 inches either behind or in front of the AVARI® Magnetic Elliptical is required for safe operation.
LEVELING: Adjust the LEVELING CAPS(18) on the REAR STABILIZER(77) so the AVARI® Magnetic
Elliptical sits on the floor without rocking. Remove and reposition the LEVELING CAPS(18)
on the REAR STABILIZER(77) to level the AVARI® Magnetic Elliptical.
MOVING: The AVARI® Magnetic Elliptical must be lifted to be moved. Two people are required to
grasp the Pivoting Shaft area and the REAR STABILIZER(77), lift and move.
Grasp here
Grasp here
Equipment Mat
FUNCTION INSPECTION:
Visually inspect the AVARI® Magnetic Elliptical to verify that assembly is as shown in the above illustration.
Check the function of the AVARI® Magnetic Elliptical, stand on the PEDAL CAPS(30, 31) and place your
hands at a comfortable position on the HANDLEBARS(3, 5). Slowly move the crank through one complete
revolution to verify that the drive train functions properly. Adjust the TENSION KNOB(8) and verify that it
functions properly and the resistance changes.
CAUTION: Locate and read the WARNING LABEL(78) on the AVARI® Magnetic Elliptical. Make sure
that all users read the WARNING LABEL(78) before using the product.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB(8) clockwise. To
decrease the load, turn the TENSION KNOB(8) counterclockwise.
There are eight levels for the load adjustment.
NOTE: The load will increase as you pedal faster.
EXERCISE WORKOUT
To start using the AVARI® Magnetic Elliptical simply stand on the foot pedals with the front of your shoes
close to the front edge of the pedal cap. Place your hands at a comfortable position on the handlebars.
Simply move your highest foot forward and follow the natural path of the machine.
Start on a load level that is comfortable to familiarize yourself with the machine. Once you are comfortable,
start adjusting the load level to achieve the workout desired.
Forward and Reverse
The AVARI® Magnetic Elliptical can be used in the forward and reverse direction to vary the muscles that
you work out. This will also vary your workout, helping you to stay motivated. To change directions, simply
slow the pedals down until they stop, and switch directions.
Load Level Adjustment
The load level of AVARI® Magnetic Elliptical can be changed at any time during your workout. Adjusting
your load level will allow you to increase or decrease your intensity level.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
Pedal movement or push the MODE button.
POWER ON :
POWER OFF :
Automatic shut off after four minutes of
inactivity.
MODE BUTTON:
Press to select display functions, include SCAN, TIME, SPEED,
DISTANCE, CALORIES, ODOMETER, RPM, and PULSE.
Press and hold for three seconds to reset all functions to zero,
except ODOMETER.
QUICK
START
MODE
FUNCTIONS:
SCAN: Automatically scans each function of TIME, SPEED, DISTANCE, CALORIES, ODOMETER,
RPM, and PULSE in sequence with change every six seconds. Press and release the
MODE button until the arrow points to “SCAN”.
TIME: Displays the time from one second up to 99:59 minutes.
SPEED: Displays the current speed from zero to 999.9 miles per hour.
DISTANCE: Displays the distance from zero to 999.9 miles.
CALORIES: Displays the calorie consumption from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
ODOMETER: Displays the total accumulated distance you have traveled from zero to 9999 miles. The
total accumulated distance is retained when the meter is turned off.
RPM: Displays crank RPM (revolutions per minute) from zero to 9999 rpm.
PULSE: Displays your pulse rate in beats per minute. To display pulse, select the PULSE mode
and grasp the pulse sensors on the handlebar, one in each hand. The heart symbol
“
“ will begin flashing when the meter senses your pulse. Your pulse will be displayed
approximately five (5) seconds after the heart symbol is displayed. If the heart symbol
does not appear, relax your grip or change your grip on the pulse sensors.
NOTE: The meter will shut off automatically after four minutes of inactivity. All function values will
be reset to zero, except ODOMETER. The ODOMETER will be reset to zero after batteries
are removed for battery replacement or storage of the unit.
AA Batteries
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the meter.
2. The meter operates with two AA batteries, the batteries are not
included. Refer to the illustration to install or replace the batteries.
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
3. Rechargeable batteries are not recommended.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE
1. To store the AVARI® Magnetic Elliptical, simply keep it in a clean dry place.
2. The minimum rest dimensions of the AVARI® Magnetic Elliptical are approximately 39.8 inches
long x 22 inches wide x 59.8 inches tall. These dimensions may vary. Please measure your AVARI®
Magnetic Elliptical if exact dimensions are needed.
3. Lift the AVARI® Magnetic Elliptical from the Pivoting Shaft area and REAR STABILIZER(2) to move.
Two people are required to move the AVARI® Magnetic Elliptical.
4. To avoid damage to the electronics, remove the batteries before storing the AVARI® Magnetic
Elliptical for one year or more.
MAINTENANCE
The safety and integrity designed into the AVARI® Magnetic Elliptical can only be maintained when
the AVARI® Magnetic Elliptical is regularly examined for damage and wear. Special attention should
be given to the following:
1. Adjust the TENSION KNOB(8) and verify that it functions properly and the resistance changes.
2. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
3. Verify that the WARNING LABEL(78) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement WARNING LABEL(78) if it is missing or damaged.
4. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5. Worn or damaged components shall be replaced immediately or the AVARI® Magnetic Elliptical
removed from service until repair is made.
6. Only Stamina Products supplied components shall be used to maintain/repair the AVARI® Magnetic
Elliptical.
7. Keep your AVARI® Magnetic Elliptical clean by wiping it off with an absorbent cloth after use.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
How you begin your exercise program depends on your physical condition. If you have been inactive for
several years or are severely overweight, start slowly and increase your workout time gradually. Increase
your workout intensity gradually by monitoring your heart rate while you exercise.
Remember to follow these essentials:
Have your doctor review your training and diet programs.
Begin your training program slowly with realistic goals that have been set by you and your physician.
Warm up before you exercise and cool down after you work out.
Take your pulse periodically during your workout and strive to stay within a range of 60% (lower
intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity, and
build up to higher intensity as you become more aerobically fit.
If you feel dizzy or lightheaded you should slow down or stop exercising.
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise
so you don't tire too quickly.
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table
below. For effective aerobic exercise, your heart rate should be maintained at a level between 60%
and 90% of your maximum heart rate. If just starting an exercise program, work out at the low end of
your target heart rate zone. As your aerobic capacity improves, gradually increase the intensity of your
workout by increasing your heart rate.
Measure your heart rate periodically during your workout by stopping the
exercise but continuing to move your legs or walk around. Place two or
three fingers on your wrist and take a six second heartbeat count. Multiply
the results by ten to find your heart rate. For example, if your six second
heartbeat count is 14, your heart rate is 140 beats per minute. A six second
wrist pulse
count is used because your heart rate will drop rapidly when you stop
exercising. Adjust the intensity of your exercise until your heart rate is at the
proper level.
Target Heart Rate Zone Estimated by Age*
Target Heart Rate Zone
(55%-90% of Maximum Heart Rate)
Average Maximum
Heart Rate 100%
Age
20 years
25 years
30 years
35 years
40 years
45 years
50 years
55 years
60 years
65 years
70 years
110-180 beats per minute
107-175 beats per minute
105-171 beats per minute
102-166 beats per minute
99-162 beats per minute
97-157 beats per minute
94-153 beats per minute
91-148 beats per minute
88-144 beats per minute
85-139 beats per minute
83-135 beats per minute
200 beats per minute
195 beats per minute
190 beats per minute
185 beats per minute
180 beats per minute
175 beats per minute
170 beats per minute
165 beats per minute
160 beats per minute
155 beats per minute
150 beats per minute
* For cardiorespiratory training benefits, the American College of Sports Medicine recommends
working out within a heart rate range of 55% to 90% of maximum heart rate. To predict the
maximum heart rate, the following formula was used: 220 - Age = predicted maximum heart rate
16
Download from Www.Somanuals.com. All Manuals Search And Download.
WARM-UP and COOL-DOWN
The purpose of warming up is to prepare your body for exercise and to minimize injuries.
Warm-Up
Warm up for two to five minutes before strength training or aerobic exercising. Perform activities that
raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging,
jumping jacks, jump rope, and running in place.
Stretching while your muscles are warm after a proper warm-up and again after your
Stretching
strength or aerobic training session is very important. Muscles stretch more easily at these times
because of their elevated temperature, which greatly reduces the risk of injury. Stretches should be held
for 15 to 30 seconds. Do not bounce.
Suggested Stretching Exercises
Lower Body Stretch
Place feet shoulder-width
apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs.
Floor Stretch
While sitting on the floor,
open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds.
DO NOT BOUNCE!
When the pull on the back of
the legs lessens, gradually
try a lower position.
DO NOT BOUNCE!
Do this stretch 10 times.
Repeat the stretch with the
left leg.
Bent Torso Pulls
Bent Over Leg Stretch
Stand with feet shoulder-
width apart and lean forward
as illustrated. Using the
arms, gently pull the upper
body towards the right leg.
Let the head hang down.
DO NOT BOUNCE!
While sitting on the floor,
have legs apart, one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent, and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.
Hold the position a minimum
of 10 seconds. Repeat
pulling the upper body to
the left leg. Do this stretch
several times slowly.
Remember to always check with your physician before starting any exercise program.
The purpose of cooling down is to return the body to its normal, or near normal, resting
Cool-Down
state at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows
blood to return to the heart. Your cool-down should include the stretches listed above and should be
completed after each strength training session.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
PART#
PART NAME
QTY
1
2
3
4
5
6
7
8
Main Frame
Upright
Left Handlebar
Front Stabilizer
Right Handlebar
Pulley
Magnetic Unit
Tension Knob
1
1
1
1
1
1
1
1
2
1
1
1
2
1
1
2
1
2
4
1
4
2
2
2
2
1
2
3
2
1
1
4
8
1
1
2
6
1
2
3
2
2
4
1
1
6
6
1
9
Pedal Arm
Stationary Handlebar
Left Cover
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Right Cover
Shoulder Bolt (ø15.9 x 77mm, M10 x 1.5 threaded)
Screw, Round Head (M5 x 0.8 x 50mm)
Meter
Handlebar Foam Tube
Tension Cable
Leveling Cap
Carriage Bolt (M8 x 1.25 x 60mm)
Pully Axle with Plate
Spacer (ø16 x ø20 x 4mm)
Crank
Screw, Round Head (M3 x 8mm)
Crank Cap
Flange Nut (M10 x 1.25)
Spacer (ø8 x ø12.5 x 10.5mm)
Bearing Nut (M17 x 1)
Washer (ø17 x ø22 x 1mm thick)
Bearing (6003RZ)
Left Pedal Cap
Right Pedal Cap
Bolt, Hex Head (M6 x 1 x 16mm)
Nylock Nut (M6 x 1)
Magnet
V-Ribbed Belt
Bolt, Button Head (M8 x 1.25 x 45mm)
Arc Washer (M8)
Sensor Wire
Foam Tube
Eyebolt (M6 x 1 x 40mm)
Tension Bracket
Nut (3/8”-26)
Nut (M6 x 1)
Idler Wheel
Idler Arm
Washer (ø10 x ø19 x 2mm thick)
Nylock Nut (M10 x 1.5)
Bolt, Button Head (M8 x 1.25 x 30mm)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
PART#
PART NAME
QTY
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
Securing Cap
Nylock Nut (M8 x 1.25)
Tension Spring
4
1
1
2
3
1
6
2
4
1
12
2
2
4
4
2
2
2
3
10
2
4
2
7
4
2
2
2
1
1
1
1
1
1
1
Endcap (ø50mm)
Screw, Round Head (M4 x 30mm)
Bolt, Button Head (M8 x 1.25 x 20mm)
Bolt, Button Head (M8 x 1.25 x 25mm)
Washer (ø16 x ø21.8 x 1mm)
Acorn Nut (M8 x 1.25)
Extension Wire
Bearing (6202z)
Washer (M10 x ø21 x 1.5mm thick, black color)
Spacer
Bolt, Button Head (M6 x 1 x 40mm)
Bolt, Button Head (M8 x 1.25 x 45mm)
Pulse Sensor Wire
Dome Plug (ø22.2mm)
Cover Cap
Bolt, Button Head (M8 x 1.25 x 15mm)
Washer (M8)
Dome Plug (ø38mm)
Screw, Round Head (M4 x 16mm)
Pivoting Arm
Thin Nylock Nut (M8 x 1.25 x 6mm thick)
Plastic Washer (M8)
Pulse Sensor
Screw, Flat Head (M4 x 16mm)
Pedal Arm Connector
Rear Stabilizer
Warning Label
Allen Wrench (6mm)
Allen Wrench (8mm)
Wrench
Combination Wrench
Manual
20
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
MODEL A550-090
WARRANTY
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on the parts and three years on
the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL
NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE,
MISUSE, ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY
REPAIR, REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED
BY STAMINA PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health
clubs, spas, gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the
product's use is in furtherance of a profit making enterprise, and all other use which is not for personal,
family, or household purposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase
and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071,
call us at 1-800-375-7520. If the defect is covered under this limited warranty, you will be requested to
return the product or part to us for free repair or replacement at our option. NO ACTION FOR BREACH
OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER THE
DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED. NO ACTION FOR
BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER
DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not transferable. IF
ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED WARRANTY OR ANY
IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY
AVAILABLE TO YOU. In the event that the purchaser makes any claim under this limited warranty or any
implied warranty, the Warrantor reserves the right to require the product to be returned for inspection,
at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of the enclosed
warranty registration card is not required for warranty coverage, but is merely a way of establishing the
date and place of purchase.
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS
OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,
SPECIAL OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY
IMPLIED WARRANTY.
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This
warranty gives you specific legal rights, and you may also have other legal rights which vary from state
to state. ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO
THE DURATION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods
to disclaim or limit implied warranties and consequential and incidental damages with respect thereto.
If any such law is found to be applicable, the foregoing disclaimers and limitations of and on implied
warranties and consequential and incidental damages with respect thereto shall be disregarded and shall
be deemed not to have been made to the extent necessary to comply with such legal restriction.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TO CONTACT CUSTOMER SERVICE
For your convenience, Stamina’s customer service representatives can be reached by email at customerservice@
staminaproducts.com or by phone at 1-800-375-7520 (in the U.S.). Our customer service representatives are available Monday
through Thursday from 7:30 a.m. until 5:00 p.m., and Friday 8:00 a.m. until 3 p.m. Central Time.
ONLINE
TELEPHONE
FAX
MAIL
CUSTOMER SERVICE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
CUSTOMER SERVICE
Fax: (417) 889-8064
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071 Springfield, MO. 65801-1071
Would you like to recieve email information or special offers from Stamina Products? Register at contact.staminaproducts.com
TO REGISTER YOUR PRODUCT
To enact your warranty, please register your product by going to register.staminaproducts.com. Please have your product model
number (printed on the cover of this owner’s manual) and the serial number (printed on the black and white sticker on your
product) ready.
If you don’t have internet access, you can call customer service at 1-800-375-7520, or fill out and mail the product registration
form below to Stamina Products, Inc.; P.O. Box 1071; Springfield, MO 65801-1071.
PRODUCT REGISTRATION FORM
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Model Number: ......................................................................................
Serial Number: .............................................................................................
Product Name: ..................................................................................................................................................................................................................................
Place Purchased: ..............................................................................................................................................................................................................................
Date of Purchase: ..................................................................................
Purchase Price: ............................................................................................
Last Name: ...................................................................................................
State: ................................................................ Zip Code: .................................................
First Name: ............................................................................................
City: ..................................................................
Email Address: .......................................................................................
Phone #: (
) ......................................................................................
*If yes, be sure your email address is included above.
Would you like to receive email information or special offers from Stamina Products?* ____Yes ____No
Detach and Mail or Fax the Form Above
TO ORDER PARTS
If there are missing or damaged parts, you can go to parts.staminaproducts.com and order those parts. If you have questions,
please contact customer service. Do not return the product. To order parts by mail, fill out the sheet below and fax it to
417-889-8064. The part will be mailed to your address.
Detach and Mail or Fax the Form Below
PARTS ORDER FORM
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Mr./Ms: ..............................................................................................................................................................................................................................................
Address: .....................................................................................................................................
City: .................................................................. State: ................................................................
IMPORTANT : We must have your phone number to process the order!
) ................................................................................ Work Phone #: (
Date of Purchase: ..................................................................................
Apt. #:..........................................................................
Zip Code: .................................................
Phone #: (
) .............................................................................
Model #: ............................................................................................................................................................................................................................................
Purchased From: ..............................................................................................................................................................................................................................
IMPORTANT : Before filling out the form below make sure you have the correct information.
Refer to the parts list to make sure you're ordering the right parts!
PART #
DESCRIPTION
QUANTITY
1
EXAMPLE:
1
Rear Unit Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|