HTD8SCS Series
540 Line Color Dome Camera
Wall & Ceiling Mountable
Please read this manual thoroughly before operation and keep
it handy for further reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Package Contents
3
Precautions
4
Camera Installation
Internal Components
5-6
7
Features
OSD
8
9
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Your Camera
10
10
SET UP
SET UP LENS
10
10
10
BACK LIGHT
AUTO GAIN (AGC)
WHITE BALANCE
CAMERA TITLE
MIRROR
11
11
12
12
12
DAY/NIGHT/SYNC
MOTION DETECTION
PRIVACY
12
13
GAMMA
13
13
RESET
ADJUST
13
EXIT
Specifications
Dimensions
Warranty
14
15
16
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PACKAGE CONTENTS
•
Please make sure that the following items are included
in the package:
1 CAMERA & Easy Mount Plate
ACCESSORIES:
4 MOUNTING SCREWS
4 SET SCREWS
1 RUBBER CABLE CAP
1 VIDEO TEST LEAD
1 WRENCH
Please leave this manual with the end-user for future
reference.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
•
•
•
•
•
•
THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY
QUALIFIED PERSONNEL
TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE
PROPER POWER CABLE
PLEASE USE AN APPROVED REGULATED 12 VOLT DC
POWER SUPPLY LIKE THE SPECO PSW-5
PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE
TO PREVENT FIRE OR ELECTRICAL SHOCK
PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
SUPPORT THE WEIGHT OF THE CAMERA
PLEASE HANDLE THIS CAMERA CAREFULLY:
- DON’T USE A STRONG OR ABRASIVE DETERGENT WHEN
CLEANING THE CAMERA.
- DO NOT EXPOSE THE CAMERA TO DIRECT SUN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA INSTALLATION
1. Assembly
Easy Mount Plate
Rubber Cap used when cables
go through the mount
Mounting Screws (4ea)
SET Screws (2ea)
Camera Base
Camera Body
OSD Joystick &
Video Test Connector
Focus & Zoom Controller
Front Case
SET Screws (2ea)
Outer Housing
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA INSTALLATION
2. Compatibility
7246WMT
CVC-TPEXT “A” type Box
“B” type Box
BCP(Using 7246WMT)
[CVCTPLATE Hole Description]
Hole 1 : 7246WMT / CVCTPEXT
Hole 2 : Electrical Box “A” type
Hole 3 : Electrical Box “B” type
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERNAL COMPONENTS
Video Test Terminal
OSD Joystick Switch
UP
SET
RIGHT
LEFT
DOWN
on the screen. Move the Joy Stick up, down, left & right to
control the OSD functions.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
BLC
When the image is in front of strong background lighting,
your camera allows you to get a clear image.
High Resolution
Horizontal resolution of 540 TV lines is
achieved by using a SONY Double Speed CCD with
410,000 pixels, yielding pictures with a high S/N ratio.
OSD
All camera functions are menu driven for easy use.
ELECTRONIC DAY/NIGHT
The camera can show color pictures in all lighting
conditions, or you can have it automatically switch to a B/W
Motion Detection
Built in motion detector with adjustable areas of coverage will
flash a warning on the screen when motion is detected.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating your camera
OSD Function
LENS
DC
MANUAL
FLK
SHUTTER
AUTO
FIXED
MANUAL
BLC
OFF
ON
AGC
OFF
ON
WHITE BAL.
ATW
AWB
FIXED
MANUAL
FUNCTION
RETURN
CAMERA ID
ON
OFF
OFF
MIRROR
ON
DAY / NIGHT
COLOR
AUTO
B/W
MOTION DET
ON
OFF
OFF
PRIVACY
ON
GAMMA
0.05~1.00
LANGUAGE
ENGLISH
RESET
USER
한국어
汉语
漢語
日本語
ADJUST
CONTRAST
SHARPNESS
CB_GAIN
CR_GAIN
RETURN
RETURN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating your camera – SETUP
1) LENS
<DC / MANUAL>
Selects Lens Type.
2) SHUTTER
<AUTO / FLK / FIXED / MANUAL
>
Adjusts shutter settings.
Flicker-less mode (FLK) reduces on-screen flickering.
Electronic Shutter Control (AUTO) adjusts brightness level on screen.
Manual mode allows you to adjust the shutter speed
from1/60~1/120,000 of a second (NTSC), or 1/50~1/100,000(PAL).
FLK is the only option available when the camera lens is set to the
recommended DC mode.
3) BLC
<ON / OFF>
Provides light level control to overcome severe
backlighting conditions.
4) AGC
<ON / OFF>
Adjusts value of AGC gain. Increase the GAIN level to brighten the
picture. (noise / distortion may develop)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
5) WHITE BAL.
<ATC / AWB / FIXED / MANUAL>
Controls color on the screen.
Select Auto Tracking White Balance (ATW) when the color
temp. is 2400°K~12000°K (for example when under a fluorescent
light or outdoors).
Manual mode allows you to increase or decrease the red
or blue factor on screen.
the white balance to your specific environment.
6) FUNCTION
(6-1) RETURN
Return to the main SETUP menu.
(6-2) CAMERA ID
<OFF / ON>
Display a name and/or
number on the monitor.
To add a camera title:
CAMERA ID : Select character by moving joystick up and
down.
C = Delete the entire name and start again.
POSITION = Position the camera title on the screen.
Push down the button to set the position.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
(6-3) MIRROR
<ON / OFF>
Produce a horizontal mirror image on screen.
(6-4) DAY / NIGHT
<AUTO / COLOR / BW>
AUTO = Automatically switches between color or black/white.
Delay – When the Day & Night function starts or stops (0~15sec)
Start Level – Set the brightness level to determine where the Day &
Night function start to operate
End Level – Set the brightness level where the Day & Night
function switches back
COLOR = Full time color mode
B/W = Full time B/W mode
(6-5) MOTION DET
<ON / OFF>
AREA = Select motion detection area.
MOTION TH = Select low luminous motion threshold value.
MOTION TRACE = Display motion trace.
(6-6) PRIVACY
<ON / OFF>
12
Download from Www.Somanuals.com. All Manuals Search And Download.
AREA SEL = Select a motion detection grid (top left, top ,right, bottom left,
bottom right) to modify.
AREA STATE = Activate or deactivate the selected grid.
LEFT/RIGHT/TOP/BOTTOM = Alter the dimensions of the selected grid.
COLOR = Select color of privacy area.
(6-7) GAMMA
<ON / USER>
Sharpen the image on screen.
Excessive sharpening may cause picture noise.
(6-8) LANGUAGE (English / 한국어 / 汉语/漢語 / 日本語)
Choose the language that should be displayed.
(6-9) RESET
Restore all factory default settings.
ADJUST
7)
Adjust level of sharpness / contrast / CB_Gain /
CR_Gain.
8) EXIT(SAVE)
Save OSD settings and exit the SETUP menu.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
ITEM
540TV Lines IR DOME CAMERA
12 Volts DC
Power Requirements
Image Sensor
1/3”, SONY SUPER HAD CCD 410,000 pixels
Effective Pixels
Maximum Aperture Ratio
Scanning System
768(H) x 494(V) (NTSC)
1 : 1.3 ~2.0
2 : 1 Interlaced 525 Lines / 60 Fields / 30 Frames
Video Output
Resolution
1.0V [p-p] NTSC Composite, 75Ω
540 TV Line
Lens Type
2.8~11MM DC Auto Iris
Back Light Compensation (BLC)
Gain Control
AUTO / OFF – Dynamically Adjustable
ON / OFF - Dynamically Adjustable
1/60 ~ 1/120,000 sec - Dynamically Adjustable
ATW / FIXED / AWB / MANUAL
0. 00Lux (48 IR LED ON)
Electric Shutter Speed
WHITE BALANCE
Min. Illumination
S/N ( Y signal)
50dB (Weight On)
Motion Detection
ON / OFF – 4 Zones
On Screen Display ( O.S.D )
PRIVACY Function
Built - in
ON / OFF (4 Programmable Zone)
-29℃ ~ +50℃ ( - 20℉ ~122℉)
Operational Temperature
Operational Humidity
30% ~90% RH
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DIMENSIONS
* FRONT VIEW
* SIDE VIEW
15
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
200 New Highway
Amityville, NY 11701
631-957-8700
Rev. 100125
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice
and without incurring any obligation.
Download from Www.Somanuals.com. All Manuals Search And Download.
|