Dome Camera
CVC624WDR
200 New Highway
Amityville, NY 11701
631-957-8700
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Package Contents
Precautions
4
5
Camera Installation
6-7
Features
8
9
OSD Menu Tree
OSD Menu Details
10-12
Troubleshooting
Specifications
13-14
15
Dimensions
Warranty
16
17
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PACKAGE CONTENTS
Please make sure that the following items are included
in the package:
1 CVC624WDR Camera
2 Mounting Screws
1 Video Test Connector
Please leave this manual with the end-user for future
reference.
COMPATIBILITY
“A” type Box
DFM Series
Electrical Box is not included in the package but
Is compatible with the camera
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
•
•
•
THIS CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED
PERSONNEL
TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE
PROPER POWER CABLE
DO NOT CLEAN THE DOME COVER WITH AN ABRAISIVE
CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR
TISSUE TO CLEAN THE DOME COVER
•
THERE ARE NO USER-SERVICEABLE PARTS INSIDE.
PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN
TO MAKE INITIAL ADJUSTMENTS
•
•
•
•
PLEASE USE A UL APPROVED REGULATED 12 VOLT DC
POWER SUPPLY
PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE
TO PREVENT FIRE OR ELECTRICAL SHOCK
PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
SUPPORT THE WEIGHT OF THE CAMERA
PLEASE HANDLE THIS CAMERA CAREFULLY:
- DON’T USE A STRONG OR ABRASIVE DETERGENT WHEN
CLEANING THE CAMERA.
- DON’T EXPOSE THE CAMERA TO DIRECT SUN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500 mA)
Power Input :RED
Center : (+)
DC 12V Power Supply
2. CONNECT VIDEO CABLE
-CONNECT BNC CABLE TO THE BNC JACK.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA INSTALLATION
MECHANICAL
(2) JOY STICK
(1) Vari-focal Lens
(3) Video Test Terminal
(1) VARI-FOCAL LENS
Adjust between TÅÆW (TELE ÅÆ WIDE) to set the
angle (focal length). Set the focus by adjusting 쏒N
NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED
INTO POSITION THROUGH THE USE OF "LOCKING HANDLES".
(2) JOY STICK
TO SET THE OSD (ON SCREEN DISPLAY) , PRESS THE JOY
STICK FOR ONE SECOND AND SET AS DESCRIBED
IN THE MANUAL
(3) VIDEO TEST TERMINAL
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
1. Superior Wide Dynamic Image Quality
It has very Wide Dynamic Range by using the Pixim ORCA Chip Set.
Film-like colors are achieved under various Light conditions even in
High Dynamic range scenes , Dynamic Range achieves a maximum
of 120dB.
Each pixel is processed independently to get clear and usable
images.
3. OSD control
Every function is controlled by OSD menu
- Automatic white balance
- Automatic gain control (max 60dB)
- Slow shutter, AGC on/off
- Line lock phase control
- Lens type control
- Auto exposure control
540 lines of horizontal resolution and 460 lines of vertical resolution.
** Pixim and Digital Pixel System are registered trademarks of
Pixim, Inc.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD MENU TREE
SPECO MAIN MENU
PRESETS
DEFAULT / INDOOR / OUTDOOR / CUSTOM
SET UP ID
DISPLAY ID : (OFF / ON)
CAMERA ID : 8 CHARACTER
ID POSITION : (UP-LEFT
/
UP-CENTER / UP-RIGHT
DOWN-LEFT
/
DOWN-RIGHT)
LENS SELECT
WDR
DC
MANUAL
AUTO
OFF
MANUAL : (WDR BIAS Range -20 to 20 / WDR RANGE 0 to 36)
WB CONTROL
ATW(Range 2K~11K)
AWB
MANUAL (Range 2K ~11K)
LOW LIGHT
SPECIAL
SLOW SHUTTER : (SHUTTER LIMIT Range OFF~X32
AUTO D/N
/
AGC CONTROL Range 0 to 60)
VIDEO : (NTSC / PAL)
FLIP : (OFF / ON)
SYNC : (L,LOCK / INT / INT2)
BACK LIGHT : (OFF / ON : BACK LIGHT ZONES)
RESOLUTION : (NORMAL / HIGH / C_NORMAL / C_HIGH)
COLOR MODE : (COLOR / B/W)
SHARPNESS : ON (Range -8 to 8) / OFF
EXIT MENU
EXIT NO CHANGE
SAVE NEW AND EXIT
RESTORE FACTORY SETTING
RELEASE VERSION
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD MENU DETAILS
1. OSD MENU ENTER / EXIT
A. OSD MENU ENTER
• Push Center Key for 2 seconds
B. OSD MENU EXIT
• Press EXIT Menu from Main Menu
• If Pressing Set Key for 2 seconds from Main Menu appears.
In this case, just press Set Key.
C. 'SAVE' and 'QUIT‘
• Left or Right Key - Selecting Menu
• Up or Down Key - Returning to Menu
1. Press the SET key to access the main setup mode.
2. Select the desired feature using the UP or Down key.
RIGHT key.
2. MAIN MENU
A. PRESETS
• DEFAULT : Optimized for normal scenes
• INDOOR : Optimized for indoor scenes with windows and/or
glass door to capture details both indoors and outdoors.
• OUTDOOR : Optimized for sunny outdoor scene to capture detail
both in bright areas and shadows.
• CUSTOM : Change the value of the customer.
B. SETUP ID
• DISPLAY ID
- ON :The ID name will displayed in the monitor.
- OFF : The name will not displayed in the monitor.
• CAMERA ID : Enter up to 8 characteristic.
• ID POSITION : Select the screen position of the camera ID.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD MENU DETAILS
C. LENS
• MANUAL : Use Manual lens Only.
D. WDR
• WDR (Wide Dynamic Range) : You can adjust the desired WDR
BIAS from -20 to 20 and WDR RANGE from 0 to 36
E. WB CONTROL
• ATW (Auto Tracking White Balance) : The camera automatically
control the white balance in any environment.
• AWB (Auto White Balance) : The white balance is automatically
adjusted in a specific environment.
• MANUAL : Users can adjust the colors by adding or reducing the
WB level. You can adjust the desired WB level from 2K to 11K.
F. LOW LIGHT
• SLOW SHUTTER : Control Image brightness by adjusting shutter
Speed, You can adjust the desired shutter speed from off to X32.
- AGC : ON (You can adjust the desired AGC level from 0 to 60dB)
or OFF (Deactivate automatic gain control feature)
• AUTO D/N : AUTO DAY/NIGHT
G. SPECIAL
• VIDEO : NTSC or PAL SELECTION
• FLIP : HORIZONTAL REVERSE (OFF or ON)
• SYNC
- INTERNAL : Internal synchronization
- INTERNAL2 : Internal synchronization (Color Rolling Mode)
- LINE LOCK : Phase adjustment may be necessary in multiple
between cameras
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD MENU DETAILS
• BACK LIGHT : BACK LIGHT ADJUST or SELECT AREA
• RESOLUTION : Select Resolution of CCD or PIXIM
• COLOR MODE : COLOR or B/W SELECTION
• SHARPNESS : ON (You can adjust the desired Sharpness form -
8 to 8) or OFF
H. EXIT MENU
• EXIT NO CHANGES : No change
• RESTORE FACTORY SETTINGS : Factory default
• RELEASE VERSION
I. PREVIOUS PAGE
• PREVIOUS PAGE : Return page
s patented Digital Pixel System (DPS) technology Marks
Pixim’
a fundamental breakthrough in imaging Technology.
Building upon technology developed at Stanford University in the 1990s,
Pixim has created An image capture and processing system that provides
High-quality pictures with enhanced dynamic Range that significantly
improves image quality in Scenes consisting of both bright and dark areas.
The core invention in DPS is the inclusion of an Analog-to-digital converter
(ADC) within each pixel of the image sensor.
The ADC translates the light Signal into a digital value at the immediate
point of Capture, thus minimizing signal degradation and cross-talk in the
array and allowing for greater noise Reduction methods.
Once the data is captured in a Digital format, a variety of digital signal
processing Techniques are used for optimal image reproduction.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If you have trouble operating your camera, refer to the following
Problem
Solution
Nothing appears on
the screen.
● Check that the power cord and line connection
between the camera and monitor are correct
● Check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the
screen is dim.
● Is the lens stained with dirt? Clean your lens with
soft clean cloth.
● Set the monitor for the proper conditions.
● If the camera is exposed to too strong light
change the camera position.
Adjust the lens’ focus.
The image on the
screen is dark.
● Adjust the contrast feature of the monitor.
● If you have an intermediate device, set the
75Ω/Hi-z properly.
The camera is not
● Check that you have properly connected
working properly,
and
the camera to an appropriate power source.
the surface of the
camera is hot.
MOTION DETECTION
function is not active.
● Have you set ‘MOTION DET.’ menu to off?
● Have you set ‘MD LEVEL’ to too low?
● Have you set ‘MD AREA’ properly
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
Solution
The color of the
picture is not
proper.
● Check that you have properly set the
‘ WHITE BALANCE ’ menu
The image on the
screen flickers.
● Is the camera facing to direct sunlight or fluorescent
lighting? Change the camera position.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Signal System
Pick-up Device
NTSC
1/3 inch Pixim ORCA CMOS (Dramatic
Dynamic range sensor)
Total of pixels
742(H) x 552(V)
Horizontal Resolution
Vertical Resolution
Scanning System
Synchronization
Video Output
540 Horizontal TV Lines (color)
460 VTVL
525 Iines interlaced / 625 Iines interlaced
Internal
1.0Vp-p/75 ohm Composite
0.08Lux (DSS on) with F1.2 Lens
53dB or more
Sensitivity
S/N Ratio
Dynamic range
Shutter Speed
120dB(max), 102dB(typical)
1/60 - 1/100,000 / 1/50 - 1/100,000
2.8~12mm Vari-focal Lens
0 - 60dB
Lens
AGC Control
Joy-Stick Switch
OSD Menu Control
Voltage Requirements
Power Consumption
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
DC 12V (8V – 18V)
Max 2.7W
-14°F ~ 122°F
-4°F ~ 158°F
Under 90% Non-condensing
under 95% Non-condensing
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DIMENSIONS
* SIDE VIEW
* TOP VIEW
16
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
200 New Highway
Amityville, NY 11701
631-957-8700
Rev. 100317
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice
and without incurring any obligation.
Download from Www.Somanuals.com. All Manuals Search And Download.
|