Speco Technologies Security Camera CVC6246IHR User Manual

INSTRUCTION  
MANUAL  
650Line Intensifier3™ Series  
HT7246IHR / HT7247IHR / HT7250IHR  
(Weatherproof Dome Camera with Chameleon™ Cover)  
HTINTB8 / HTINTB9 / HTINTB10  
(Weatherproof Bullet Camera with mount plate)  
HTINTD8 / HTINTD9 / HTINTD10  
(Weatherproof Dome Camera)  
HT647HRTP  
(Miniature Weatherproof Dome Camera with Chameleon™ Cover)  
CVC6246IHR  
(Indoor Wall & Ceiling Mount Dome Camera)  
HTINTT5  
(Traditional Box type Camera)  
Speco Technologies is constantly developing product improvements.  
We reserve the right to modify product design and specifications without notice and without incurring any obligation.  
Rev. 6/9/10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Do not install the camera in  
extreme temperature conditions.  
Do not install the camera under  
unstable lighting conditions.  
Do not touch the front lens of the  
camera.  
Only use the camera under conditions  
where temperatures are between  
-10°C and +50°C. Be especially careful to provide  
ventilation when operating under high  
temperatures.  
Severe lighting change or flicker can  
cause the camera to work improperly.  
This is one of the most important parts of the  
camera. Be careful not to leave  
fingerprints on the lens cover.  
Never keep the camera pointed  
directly at strong light.  
Do not drop the camera or subject  
it to physical shocks.  
Do not expose the camera to  
radioactivity.  
It can cause malfunctions to occur.  
Severe lighting change or flicker can  
cause the camera to work improperly.  
If exposed to radioactivity the CCD  
will fail.  
NOTE  
* If the camera is exposed to  
spotlight or object reflecting strong light, smear or blooming may occur.  
* please check that the power satisfies the normal specification before  
connecting the camera.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
650 Line Intensifier3  
(Weatherproof Dome Camera with Chameleon™ Cover)  
DC Auto Iris Varifocal Lens 2.8-12mm / 9-22mm / 5-50mm  
HT7246IHR (2.8-12mm)  
HT7247IHR (9-22mm)  
HT7250IHR (5-50mm)  
SPECIFICATIONS  
MODEL  
HT7246IHR / HT7247IHR / HT7250IHR  
1/3” Sony Super HAD ll CCD  
NTSC, PAL  
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)  
2:1 Interlace  
Internal  
650TV Lines  
CDS OFF: 0.15 Lux, CDS ON: 0.00002 Lux  
More than 52dB  
CVBS: 1.0Vp-p / 75Ω  
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)  
Available  
On / Off (Level adjustable)  
BLC / HLC / OFF  
Color / BW / AUTO  
Low / High / Off  
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)  
Auto / Off (Selectable x2 ~ x512)  
On / Off (8 Programmable Zones)  
On / Off (12 Programmable Zones)  
On / Off (Level adjustable)  
On / Off (x1 ~ x16)  
On / Off  
On / Off (Level adjustable)  
On / Off  
Image Pick-Up Device  
TV System  
Total Pixels  
Effective Pixels  
Scanning Frequency  
Scanning System  
Synchronization  
Resolution  
Minimum Illumination  
S/N Ratio  
Video Output  
Electronic Shutter Speed  
OSD  
WDR  
BLC  
Day & Night  
Gain Control  
White Balance  
Intensify  
Motion Detection  
Privacy Masking  
SPECO DNR  
Digital Zoom  
DIS (Digital Image Stabilization)  
Sharpness  
Flip / Mirror  
Power Supply  
Power Consumption  
Lens  
DC 12V / AC24V(Dual Voltage)  
DC 12V 250mA / AC24V 100mA  
DC Auto Iris Varifocal Lens 2.8-12mm / 9-22mm / 5-50mm  
14~122ºF RH 95% Max  
-4~140ºF RH 95% Max  
5.1" Dia * 3.1"H  
Operational Temp.  
Storage Temp.  
Dimension  
Weight  
1 lb  
Download from Www.Somanuals.com. All Manuals Search And Download.  
650 Line Intensifier3  
(Weatherproof Bullet Camera with mount plate)  
DC Auto Iris Varifocal Lens 2.8-12mm / 5-50mm / 9-22mm  
HTINTB8 / HTINTB8W  
(2.8-12mm)  
HTINTB9 / HTINTB9W  
(5-50mm)  
HTINTB10 / HTINTB10W  
(9-22mm)  
SPECIFICATIONS  
MODEL  
HTINTB8 / HTINTB9 / HTINTB10  
1/3” Sony Super HAD ll CCD  
NTSC, PAL  
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)  
2:1 Interlace  
Internal  
650TV Lines  
CDS OFF: 0.15 Lux, CDS ON: 0.00002 Lux  
More than 52dB  
CVBS: 1.0Vp-p / 75Ω  
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)  
Available  
On / Off (Level adjustable)  
BLC / HLC / OFF  
Color / BW / AUTO  
Low / High / Off  
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)  
Auto / Off (Selectable x2 ~ x512)  
On / Off (8 Programmable Zones)  
On / Off (12 Programmable Zones)  
On / Off (Level adjustable)  
On / Off (x1 ~ x16)  
On / Off  
On / Off (Level adjustable)  
On / Off  
Image Pick-Up Device  
TV System  
Total Pixels  
Effective Pixels  
Scanning Frequency  
Scanning System  
Synchronization  
Resolution  
Minimum Illumination  
S/N Ratio  
Video Output  
Electronic Shutter Speed  
OSD  
WDR  
BLC  
Day & Night  
Gain Control  
White Balance  
Intensify  
Motion Detection  
Privacy Masking  
SPECO DNR  
Digital Zoom  
DIS (Digital Image Stabilization)  
Sharpness  
Flip / Mirror  
Power Supply  
Power Consumption  
Lens  
DC 12V / AC24V(Dual Voltage)  
DC 12V 250mA / AC24V 100mA  
DC Auto Iris Varifocal Lens 2.8-12mm / 5-50mm / 9-22mm  
14~122ºF RH 95% Max  
-4~140ºF RH 95% Max  
3.46"(W) * 3.43"(H) * 11.22"(D)  
3 lbs  
Operational Temp.  
Storage Temp.  
Dimension  
Weight  
Download from Www.Somanuals.com. All Manuals Search And Download.  
650 Line Intensifier3  
(Weatherproof Dome Camera)  
DC Auto Iris Varifocal Lens 2.8-12mm / 5-50mm / 9-22mm  
HTINTD8 / HTINTD8W  
(2.8-12mm)  
HTINTD9 / HTINTD9W  
(5-50mm)  
HTINTD10 / HTINTD10W  
(9-22mm)  
SPECIFICATIONS  
MODEL  
HTINTD8 / HTINTD9 / HTINTD10  
1/3” Sony Super HAD ll CCD  
NTSC, PAL  
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)  
2:1 Interlace  
Internal  
650TV Lines  
CDS OFF: 0.15 Lux, CDS ON: 0.00002 Lux  
More than 52dB  
CVBS: 1.0Vp-p / 75Ω  
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)  
Available  
On / Off (Level adjustable)  
BLC / HLC / OFF  
Color / BW / AUTO  
Low / High / Off  
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)  
Auto / Off (Selectable x2 ~ x512)  
On / Off (8 Programmable Zones)  
On / Off (12 Programmable Zones)  
On / Off (Level adjustable)  
On / Off (x1 ~ x16)  
On / Off  
On / Off (Level adjustable)  
On / Off  
Image Pick-Up Device  
TV System  
Total Pixels  
Effective Pixels  
Scanning Frequency  
Scanning System  
Synchronization  
Resolution  
Minimum Illumination  
S/N Ratio  
Video Output  
Electronic Shutter Speed  
OSD  
WDR  
BLC  
Day & Night  
Gain Control  
White Balance  
Intensify  
Motion Detection  
Privacy Masking  
SPECO DNR  
Digital Zoom  
DIS (Digital Image Stabilization)  
Sharpness  
Flip / Mirror  
Power Supply  
Power Consumption  
Lens  
DC 12V / AC24V(Dual Voltage)  
DC 12V 250mA / AC24V 100mA  
DC Auto Iris Varifocal Lens 2.8-12mm / 5-50mm / 9-22mm  
14~122ºF RH 95% Max  
-4~140ºF RH 95% Max  
5.51"(W) * 4.37"(H) * 5.51"(D)  
3.08 lbs  
Operational Temp.  
Storage Temp.  
Dimension  
Weight  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
650 Line Intensifier3  
(Miniature Weatherproof Dome Camera with Chameleon™ Cover)  
3.6mm Fixed Board Lens  
HT647HRTP (3.6 Fixed Board Lens)  
SPECIFICATIONS  
MODEL  
HT647HRTP  
1/3” Sony Super HAD ll CCD  
NTSC, PAL  
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)  
2:1 Interlace  
Internal  
650TV Lines  
CDS OFF: 0.15 Lux, CDS ON: 0.00002 Lux  
More than 52dB  
CVBS: 1.0Vp-p / 75Ω  
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)  
Available  
On / Off (Level adjustable)  
BLC / HLC / OFF  
Color / BW / AUTO  
Low / High / Off  
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)  
Auto / Off (Selectable x2 ~ x512)  
On / Off (8 Programmable Zones)  
On / Off (12 Programmable Zones)  
On / Off (Level adjustable)  
On / Off (x1 ~ x16)  
On / Off  
On / Off (Level adjustable)  
On / Off  
Image Pick-Up Device  
TV System  
Total Pixels  
Effective Pixels  
Scanning Frequency  
Scanning System  
Synchronization  
Resolution  
Minimum Illumination  
S/N Ratio  
Video Output  
Electronic Shutter Speed  
OSD  
WDR  
BLC  
Day & Night  
Gain Control  
White Balance  
Intensify  
Motion Detection  
Privacy Masking  
SPECO DNR  
Digital Zoom  
DIS (Digital Image Stabilization)  
Sharpness  
Flip / Mirror  
Power Supply  
Power Consumption  
Lens  
DC 12V  
DC 12V 250mA  
3.6mm Fixed Board Lens  
14~122ºF RH 95% Max  
-4~140ºF RH 95% Max  
4.33"(W) * 3.23"(H) * 4.33"(D)  
1.54 lbs  
Operational Temp.  
Storage Temp.  
Dimension  
Weight  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
650 Line Intensifier3  
(Indoor Wall & Ceiling Mount Dome Camera)  
DC Auto Iris Varifocal Lens 2.8-12mm  
CVC6246IHR / CVC6246IHRW  
(2.8-12mm)  
SPECIFICATIONS  
MODEL  
CVC6246IHR  
1/3” Sony Super HAD ll CCD  
NTSC, PAL  
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)  
2:1 Interlace  
Internal  
650TV Lines  
CDS OFF: 0.15 Lux, CDS ON: 0.00002 Lux  
More than 52dB  
CVBS: 1.0Vp-p / 75Ω  
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)  
Available  
On / Off (Level adjustable)  
BLC / HLC / OFF  
Color / BW / AUTO  
Low / High / Off  
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)  
Auto / Off (Selectable x2 ~ x512)  
On / Off (8 Programmable Zones)  
On / Off (12 Programmable Zones)  
On / Off (Level adjustable)  
On / Off (x1 ~ x16)  
On / Off  
On / Off (Level adjustable)  
On / Off  
Image Pick-Up Device  
TV System  
Total Pixels  
Effective Pixels  
Scanning Frequency  
Scanning System  
Synchronization  
Resolution  
Minimum Illumination  
S/N Ratio  
Video Output  
Electronic Shutter Speed  
OSD  
WDR  
BLC  
Day & Night  
Gain Control  
White Balance  
Intensify  
Motion Detection  
Privacy Masking  
SPECO DNR  
Digital Zoom  
DIS (Digital Image Stabilization)  
Sharpness  
Flip / Mirror  
Power Supply  
Power Consumption  
Lens  
DC 12V  
DC 12V 250mA  
DC Auto Iris Varifocal Lens(2.8mm-12mm)  
14~122ºF RH 95% Max  
-4~140ºF RH 95% Max  
Operational Temp.  
Storage Temp.  
Dimension  
5.47"(W) * 3.82"(H) * 5.47"(D)  
1.54 lbs  
Weight  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
650 Line Intensifier3  
(Traditional Box type Camera)  
C&CS Mount Lens  
HTINTT5 (C&CS Mount Lens)  
SPECIFICATIONS  
MODEL  
HTINTT5  
1/3” Sony Super HAD ll CCD  
NTSC, PAL  
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)  
2:1 Interlace  
Internal  
650TV Lines  
CDS OFF: 0.15 Lux, CDS ON: 0.00002 Lux  
More than 52dB  
CVBS: 1.0Vp-p / 75Ω  
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)  
Available  
On / Off (Level adjustable)  
BLC / HLC / OFF  
Color / BW / AUTO  
Low / High / Off  
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)  
Auto / Off (Selectable x2 ~ x512)  
On / Off (8 Programmable Zones)  
On / Off (12 Programmable Zones)  
On / Off (Level adjustable)  
On / Off (x1 ~ x16)  
On / Off  
On / Off (Level adjustable)  
On / Off  
Image Pick-Up Device  
TV System  
Total Pixels  
Effective Pixels  
Scanning Frequency  
Scanning System  
Synchronization  
Resolution  
Minimum Illumination  
S/N Ratio  
Video Output  
Electronic Shutter Speed  
OSD  
WDR  
BLC  
Day & Night  
Gain Control  
White Balance  
Intensify  
Motion Detection  
Privacy Masking  
SPECO DNR  
Digital Zoom  
DIS (Digital Image Stabilization)  
Sharpness  
Flip / Mirror  
Power Supply  
Power Consumption  
Lens  
DC 12V / AC24V(Dual Voltage)  
DC 12V 250mA / AC24V 100mA  
DC Auto Iris Varifocal Lens(2.8mm-12mm)  
14~122ºF RH 95% Max  
-4~140ºF RH 95% Max  
2.2"(W) * 2.5"(H) * 4"(D)  
0.88 lb  
Operational Temp.  
Storage Temp.  
Dimension  
Weight  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA INSTALLATION  
jvuulj{Gwv~lyGjhislG  
XUG~oluG|zpunGXYG}vs{zGkjGOŠ–•š›ˆ•›G–“›ˆŽŒG\WWG”hPG  
w–žŒ™Gp•—œ›Gaylk  
jŒ•›Œ™GaGORP  
kjGXY}Gw–žŒ™Gzœ——“  
YUG~oluG|zpunGY[G}vs{zGhjGO[WG}–“›Gh”—šP  
ylkORP  
hjGY[}  
ishjraOTP  
w–žŒ™Gzœ——“  
ZUGjvuulj{G}pklvGjhislG  
T jvuulj{GiujGjhislG{vG{olGiujGqhjrUG  
[UGjvuulj{Gh“ˆ™”G–œ›—œ›GOyŒ“ˆ G–œ›—œ›P  
T j–••ŒŠ›GORGSGjvtPG–™Gw–š›ŒGˆŠ›ˆ›–•Gˆ•‹GOTUGjvtPG–™G  
uŒŽˆ›ŒGˆŠ›ˆ›–•G–GlŸ›Œ™•ˆ“Gh“ˆ™”GkŒŠŒGžŒ•Gt–›–•G  
kŒ›ŒŠ›–•GšG˄vu˅G•G›ŒGŠˆ”Œ™ˆU  
R
w–š›ŒGh“ˆ™”GkŒŠŒG  
jvtG  
uŒŽˆ›ŒGh“ˆ™”GkŒŠŒ  
T
h“ˆ™”Gvœ›—œ›G  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
1
2
Contents  
Safety Instructions  
FEATURES  
3
4
FEATURES  
5
Camera Menu Set Up  
1. Preset Mode  
5
5
2. Menu Set Up  
5
3. Lens Setting  
6
4. Exposure Setting  
5. White Balance Setting  
6. WDR Setting  
7
8
9
7. Backlight Setting  
8. SPECO DNR Setting  
9. Day/Night Setting  
10. Special Setting  
11. RETURN Setting  
Trouble Shooting  
10  
11  
12  
16  
17  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
Precautions for use  
This camera should be installed by qualified personnel only  
There are no user serviceable parts inside  
Do not disassemble this camera other than to make initial adjustments  
Use a UL approved regulated 24 volt AC or 12 volt DC power supply  
Use appropriate low voltage power cable to prevent fire or electrical shock  
Please insure that your installation area can support the weight of the camera  
Please handle this camera carefully :  
Do not use a strong or abrasive detergent when cleaning the camera  
Do not install near cooling or heating device  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Now with “PRESETS”  
PRESETS (Outdoor, Indoor, Elevator, Lobby, Hallway & Low Light)  
Used for a quick and easy setup for the installation environment.  
650TVL Resolution  
Horizontal resolution of 650 TV lines is achieved by using a  
SONY Super-HAD CCD with 410,000 pixels, and a custom DSP  
yielding pictures with a high S/N ratio.  
INTENSIFIER 3  
More Powerful Performance in low light condition.  
High quality Pictures to be captured in very low light condition.  
WDR  
More Powerful WDR in strong back lighting.  
Your camera allows you to get a clear image.  
SPECO DNR  
The Intensifier camera has a DSP chip that can remove image  
noise efficiently showing clean images in low light conditions.  
HLC (High Light Compensation)  
This function reverses bright spots in the picture (such as  
headlights). This enables the entire system to do a better job of  
resolving and displaying grayscale information such as a  
license plate.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Motion Detection with Alarm Output  
Built in motion detector with adjustable areas of coverage will  
Send a signal to an external alarm device when motion is detected.  
PRIVACY MASK  
It also has the ability to mask up to 8 areas of the picture where  
Viewing is not desired. Each zone can be independently  
programmed via the OSD  
STABILIZER  
This function removes image jitter that is caused by vibrations in  
the building and reduces the amount of hard drive space.  
DIGITAL ZOOM  
The picture could be enlarged by this function in digital.  
DAY/NIGHT  
The Intensifier camera can show color pictures in all lighting  
conditions, or you can have it automatically switch to a B/W  
picture in low light conditions  
OSD  
All camera functions are menu driven for easy use.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preset Mode  
SPECO TECH  
1.PRESET MODE INDOOR  
2.MAIN SETUP  
3.EXIT  
RESET  
1. Preset : INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY / ELEVATOR.  
- Used for a quick and easy setup for the installation environment.  
Menu Setup  
1. Press the Function Setup switch.  
- Main setup menu is displayed on the monitor screen.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.WDR  
5.BACKLIGHT  
6.SPECO DNR  
7.DAY/NIGHT  
8.SPECIAL  
9.RETURN  
ATW  
OFF  
OFF  
ON  
AUTO  
SAVE  
2. Select a desired function using the Function Setup switch.  
- Place the cursor over a desired item.  
3. Set up a selected item by using the Function Setup switch.  
4. To finish the setting, select 'RETURN' and press the Function Setup switch.  
NOTE  
■ An item with the  
icon also has sub menus. To select a sub menu, select an item  
with the icon and press the Function Setup switch.  
■ An item with the - - - icon is unavailable due to function settings.  
Lens Setting  
Using this function, you can control the screen brightness.  
1. When the SETUP menu screen is displayed, select 'LENS' by using  
the Function Setup switch so that the arrow indicates 'LENS'.  
2. DC : You can adjust the minimum shutter and maximum value of ESC  
shutter mode.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
ATW  
3. THE Lens mode has sub menu items as listed below.  
- BRIGHTNESS : Adjusts the video brightness.  
-
FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the  
Focus Settings mode under each lens menu. Activate the Focus Settings  
mode, adjust the lens focus, and then deactivate the settings mode.  
NOTE  
■ If color rolling occurs when using a DC lens, set Shutter to Fixed (---).  
Exposure Setting  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
ATW  
1. When the SETUP menu screen is displayed, select 'EXPOSURE' by  
using the Function Setup Switch.  
2. Select a desired mode using the Function Setup switch.  
EXPOSURE SETUP  
1.BRIGHTNESS  
2.SHUTTER  
3.AGC  
4.INTENSIFY  
5.RETURN  
25  
- - -  
HIGH  
OFF  
◆ SHUTTER : You can select either auto or manual shutter.  
* --- : Shutter speed is fixed at 1/60sec(1/50sec)  
* ESC : Select this to control the shutter speed automatically. If ESC is  
selected, the shutter speed is automatically controlled depending  
on the ambient illumination of the subject.  
* MANUAL : You can control shutter speed manually.  
(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)  
* A.FLK : Select this when you see picture flicker, this can happen when the  
frequency of the local lighting clashes with the camera.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
■ When the SHUTTER is set to MANUAL or A.FLK mode, INTENSIFY will be disabled.  
AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen  
- but the higher the noise.  
* OFF : Deactivates the AGC function.  
* LOW : Allows automatic gain control from 5.3dB to 32dB.  
* HIGH : Allows automatic gain control from 5.3dB to 37dB.  
INTENSIFY : When it is night or dark, the camera automatically detects the  
light level and maintains a clear picture if this mode is activated.  
* OFF : Deactivates the INTENSIFY function.  
* AUTO : Activates the INTENSIFY function.  
RETURN : Select this to save the changes in the EXPOSURE menu and return  
to the SETUP menu.  
NOTE  
■ If you press the Function Setup switch to ‘AUTO’ mode, you can adjust brightness by  
increasing or decreasing the shutter speed. (x2 ~ x512)  
■ Note that the higher the zoom level, the brighter the screen, but the more likely there  
will be a ghosting effect.  
■ It is normal for Noise, Spots and Whitish symptoms to appear in INTENSIFY mode  
when the D-ZOOM level is increased.  
White Balance (White Bal) Setting  
Use the White Balance function to adjust the screen color.  
1. When the SETUP menu screen is displayed, select 'White Bal' by using the  
Function Setup switch so that the arrow indicates 'White Bal'.  
2. Select a desired mode using the Function Setup switch.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
ATW  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
※ Select one of the following 5 modes, as appropriate for your purpose.  
ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K.  
OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K.  
(sodium light inclusion)  
INDOOR : Select this when the color temperature is between 4,500˚K and 8,500˚K.  
MANUAL : Select this to fine-tune White Balance manually. Set White Balance first  
by using the ATW or AWC mode. After that switch to MANUAL mode,  
fine-tune the White Balance and then press the Function Setup switch.  
AWC→SET : To find the optimal luminance level for the current environment, point  
the camera towards a sheet of white paper and press the Function  
Setup switch. If the environment changes, readjust it.  
NOTE  
■ White Balance may not work properly under the following conditions. In this case  
select the AWC mode.  
When the color temperature of the environment surrounding the subject is out of the  
control range (e.g. clear sky or sunset).  
When the ambient illumination of the subject is dim.  
If the camera is directed towards a fluorescent light or is installed in a place where  
illumination changes dramatically, the White Balance operation may become unstable.  
WDR Setting  
WDR illuminates darker spots of an image while retaining the same light  
level for brighter spots to even out the overall brightness of images with  
high contrast between bright and dark spots.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.WDR  
ATW  
OFF  
1. When the SETUP menu screen is displayed, select 'WDR' by using the  
switch so that the arrow indicates 'WDR'.  
2. Use the switch to change the WDR level according to the contrast  
between bright and dark areas.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Backlight Setting  
Unlike conventional cameras, the 650Line Intensifier3™ Series are designed to  
deliver a distinctive subject and background at the same time, even when the  
subject is backlight, by using the features of the proprietary W-V DSP chip.  
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using  
the Function Setup switch so that the arrow indicates 'BACKLIGHT'.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.WDR  
5.BACKLIGHT  
6.SPECO DNR  
7.DAY/NIGHT  
8.SPECIAL  
9.RETURN  
ATW  
OFF  
OFF  
ON  
AUTO  
SAVE  
2. Select a desired mode using the Function Setup switch.  
BLC : Enables a user to directly select a desired area from a picture, and to view  
the area more clearly.  
HLC (High Light Compensation) : If the scene contains extremely bright light areas  
such as; from car headlights, the light can mask out much of the on-screen detail  
LEVEL : Adjust level of the HLC function.  
-
-
-
LIMIT : Enable to change the operating condition.  
MASK COLOR/TONE : Change the color / transparency of the masking area.  
(Black, Red, Blue, Cyan, Magenta)  
-
TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced  
OFF : Not being used  
3. Select a desired mode using the Function Setup switch and press the Function Setup switch.  
Select 'BLC' to adjust the area to be enhanced then adjust the level.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLC SETUP  
HLC SETUP  
LEVEL  
TOP  
BOTTOM  
LEFT  
LOW  
38  
109  
54  
LEVEL  
LIMITS  
MIDDLE  
NIGHT ONLY  
BLACK  
MASK COLOR  
MASK TONE  
TOP  
BOTTOM  
LEFT  
1
RIGHT  
121  
5
120  
5
Press Set to Return  
RIGHT  
172  
Press Set to Return  
NOTE  
Because there can be a difference in the effectiveness of HLC according to the amount  
of light area in the screen, optimize the installation angle for the best HLC performance.  
When dark, the HLC is only activated when a bright light exceeding a specific size in  
NIGHT ONLY mode.  
The HLC is not activated in day light or when bright light is not present at night in NIGHT  
ONLY mode.  
BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.  
SPECO DNR Setting  
This function reduces the background noise in a low luminance environment.  
1. When the SETUP menu screen is displayed, select 'SPECO DNR' by using the  
Function Setup switch so that the arrow indicates 'SPECO DNR'.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.WDR  
5.BACKLIGHT  
6.SPECO DNR  
7.DAY/NIGHT  
8.SPECIAL  
9.RETURN  
ATW  
OFF  
OFF  
ON  
AUTO  
SAVE  
2. Select a desired mode using the Function Setup switch.  
OFF : Deactivates SPECO DNR. Noise is not reduced.  
ON : Activates SPECO DNR so that noise is reduced.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Set the SPECO DNR mode to 'ON' and press the Function Setup switch. Then  
you can adjust the noise reduction level.  
NOTE  
You cannot set the SPECO DNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’.  
When adjusting the noise reduction level in the SPECO DNR mode, remember that the higher  
the level set, the more the noise level will be reduced, as will the brightness of the image.  
Day/Night Setting  
You can display pictures in color or black and white.  
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT'by using the  
Function Setup switch so that the arrow indicates 'DAY/NIGHT'.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.WDR  
5.BACKLIGHT  
6.SPECO DNR  
7.DAY/NIGHT  
8.SPECIAL  
9.RETURN  
ATW  
OFF  
OFF  
ON  
AUTO  
SAVE  
2. Select a desired mode using the Function Setup Switch according to the  
picture display you want.  
COLOR : The picture is always displayed in color.  
B/W : The picture is always displayed in black and white.  
- BURST MODE : You can turn on or off the burst  
signal on B/W mode.  
B/W MODE SETUP  
1.BURST MODE  
2.RETURN  
OFF  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTO : The mode is switched to 'Color' in a normal environment, but switches to  
'B/W' mode when ambient illumination is low. To set up the switching time for AUTO  
mode, press the Function Setup switch. You can turn on or off the burst signal on B/W  
mode.  
AUTO SETUP  
- BURST MODE : You can turn on or off the burst signal  
1.BURST MODE  
2.COLOR→B/W  
DURATION  
DWELL TIME  
3.B/W→COLOR  
DURATION  
ON  
on B/W mode.  
FAST  
3SEC  
- DURATION : You can select brightness of illumination  
about changing the day/night mode.  
- DWELLTIME : You can select the duration time about  
changing the day/night mode.  
FAST  
10SEC  
DWELL TIME  
4.RETURN  
→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40, 60s  
COLOR→B/W B/W→COLOR  
FAST  
SLOW  
2.5 lux  
1 lux  
5 lux  
10 lux  
* The day/night switching point of the  
camera can be adjusted.  
NOTE  
When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as like selecting 'COLOR'  
mode and 'AUTO' mode can not be selected.  
Special Setting  
1. When the SETUP menu screen is displayed, select 'SPECIAL' by using the  
Function Setup switch so that the arrow indicates 'SPECIAL'.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.WDR  
5.BACKLIGHT  
6.SPECO DNR  
7.DAY/NIGHT  
8.SPECIAL  
9.RETURN  
ATW  
OFF  
OFF  
ON  
AUTO  
SAVE  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Select a desired mode using the Function Setup switch.  
SPECIAL  
1.IMAGE ADJ  
2.MONITOR  
3.CAM TITLE  
4.SYNC  
OFF  
INT  
5.MOTION DET  
6.PRIVACY  
7.COMM ADJ  
8.LANGUAGE  
9.RETURN  
OFF  
OFF  
ENGLISH  
IMAGE ADJ. :  
1) When the SETUP menu screen is displayed, select 'IMAGE ADJ' by  
using the Function Setup switch so that the arrow indicates 'IMAGE ADJ'.  
2) Select a desired mode using the Function Setup switch.  
IMAGE SETUP  
1.V-REV  
2.H-REV  
3.D-ZOOM  
4.DIS  
OFF  
OFF  
5.FONT COLOR  
6.SHARPNESS  
7.RETURN  
WHITE  
ON  
* V-REV : You can flip the picture vertically on the screen.  
* H-REV : You can flip the picture horizontally on the screen.  
* D-ZOOM : You can use a digital zoom of x1 ~ x16.  
* DIS (Digital Image Stabilizer)  
:
This function mitigates any picture movement due  
to external factors such as wind.  
*
FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)  
* SHARPNESS : As you increase this value, the picture outline becomes stronger and clearer.  
Adjust this value appropriately depending on the sharpness of the picture.  
* RETURN : Select this to save the settings for the IMAGE ADJ menu and to return to the SETUP menu.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
When the V-REV or H-REV mode is enabled, the text on the screen does not flip.  
If you increase the SHARPNESS level too high, the picture may become distorted or noise  
may appear.  
MONITOR : Please change the settings value of video appropriate to your monitor.  
1) LCD : Please select this menu item when using a LCD monitor.  
2) CRT : Please select this menu item when using a CRT monitor.  
3) USER : Please use this menu item when using a monitor other than standard ones. You can  
change the gamma, PED level, and color gain in the sub menus.  
CAM TITLE : If you enter a title, the title will appear on the monitor.  
1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the  
arrow indicates 'CAM TITLE'.  
CAMERA TITLE SETUP  
2) Set it to 'ON' by using the Function Setup switch.  
A B C D E F G H I J K L M  
3) Press the Function Setup switch.  
N O P Q R S T U V W X Y Z  
a b c d e f g h i j k l m  
n o p q r s t u v w x y z  
- . 0 1 2 3 4 5 6 7 8 9  
4) Use the Function Setup switch to move to a  
desired letter and select the letter by pressing  
the Function Setup switch. Repeat this to enter  
multiple letters. You can enter up to 15 letters.  
5) Enter a title, move the cursor to 'POS' and  
press the Function Setup switch. The entered  
title appears on the screen. Select the position  
to display the title on the screen by using the  
Function Setup switch and press the Function  
Setup switch. When the position is determined,  
select 'END' and press the Function Setup switch  
to return to the SPECIAL menu.  
←→CLR  
POS  
END  
SHOP  
NOTE  
When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if  
you enter one.  
Only English is available in this mode.  
If you move the cursor to CLR and press the Function Setup switch, all the letters are  
deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function  
Setup switch. Move the cursor over the letter to be edited, move the cursor to the letter to be  
inserted and then press the Function Setup switch.  
SYNC : In areas where the supply is at 60Hz(NTSC), 50Hz(PAL), you can synchronize  
the output phase of multiple cameras using the power synchronization function  
(Line-Lock) without using a synchronization signal generator.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- INT : Internal Synchronization Type  
- L/L : Power Synchronization Type, Line-lock  
* Press the Function Setup switch.  
* You can select a desired phase from 0 to 359 when select 'phase'.  
NOTE  
When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L type  
synchronization.  
When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.  
MOTION DET :This product has a feature  
MOTION DET  
1.SENSITIVITY  
2.AREA MODE  
3.SEL POS  
4.XPOS  
5.YPOS  
6.FILL → SET  
7.RETRUN  
that allows you to observe movement of  
objects in 8 different areas on the screen,  
and the words 'MOTION DETECTED' appear  
on the screen when movement is detected.  
Activity can be monitor more efficiently.  
1) When the SPECIAL menu screen is displayed,  
press the Function Setup switch so that the arrow  
indicates‘MOTION DET’.  
AREA1  
ON  
L-TOP  
3
5
2) Set up the mode using the Function Setup switch.  
- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high, motion  
detection sensitivity is increased to recognize even small movement.  
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.  
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.  
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.  
- YPOS : Determines the coordinate of the vertical axis for SEL POS.  
- FILL→SET : Fills in a selected MD area. The color of the area can be selected from brown,  
orange, blue, cyan, green, yellow, magenta and red.  
-
RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.  
PRIVACY : Mask an area you want to hide on the screen.  
PRIVACY AREA SETUP  
1.AREA  
2.MODE  
3.MASK COLOR  
4.MASK TONE  
5.TOP  
AREA1  
OFF  
GREEN  
1
39  
6.BOTTOM  
7.LEFT  
79  
13  
8.RIGHT  
52  
9.RETURN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1) When the SPECIAL menu screen is displayed, press the Function  
Setup switch so that the arrow indicates 'PRIVACY'.  
2) Set up the mode using the Function Setup switch.  
- AREA : You can select up to 12 PRIVACY areas.  
- MODE : Determines whether to use the area selected in the AREA.  
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray.  
- MASK TONE : Adjust the brightness of MASK COLOR.  
- TOP/BOTTOM/LEFT/RIGHT :Adjust the size and position of the selected area.  
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.  
RETURN Setting  
Select a desired RETURN mode using the Function Setup Switch.  
- SAVE : Save the current settings and RETURN the MAIN SETUP menu.  
-
NOT SAVE : Do not save the current settings and RETURN the MAIN SETUP menu.  
- RESET : Resets the camera settings to the factory defaults. Language,  
Communication and Monitor Settings are not initialized.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble Shooting  
PROBLEM  
POSSIBLE CAUSE  
Check the power cable, power supply output and video  
Northing appears on  
connection between the camera and monitor.  
the screen.  
Are the camera lens or the lens glass dirty?  
Clean the lens / glass with a soft clean cloth.  
Adjust the monitor controls, as required.  
If the camera is facing a very strong light, change  
the camera position.  
The image on the  
screen is dim.  
Adjust the lens focus.  
Adjust the contrast control of the monitor.  
The image on the  
screen is dark.  
If there is an intermediate device, correctly set the 75Ω/Hi-z.  
The camera is not  
working properly  
and the surface of  
the camera is hot.  
Check the camera is correctly connected to an appropriate  
regulated power source.  
Has MOTION DET been set to ON in the menu?  
Motion Detection  
is not activated.  
Has MD AREA been properly defined?  
The color of the  
Check the settings in WHITE BALANCE menu.  
picture is not correct.  
The image on the  
Make sure that the camera isn’t facing direct sunlight or  
screen flickers.  
fluorescent lighting. If necessary,change the camera position.  
Check that the AGC setting in the EXPOSURE menu is’t set to OFF.  
Check the EXPOSURE menu and make sure SHUTTER is set to------.  
The INTENSIFY does  
not work.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRODUCT WARRANTIES AND INFORMATION EFFECTIVE JULY 8, 2008  
POLICY, TERMS AND CONDITIONS OF SALE  
This statement of policy is in lieu of any other policy, expressed or implied, and no representative or person is authorized to assume for us any  
other liability or policy without our written consent. We cannot be held responsible for typographical errors.  
TERMS OF PAYMENT  
2%, 10 days, net 30 from invoice date of merchandise for qualified accounts or Visa/MasterCard/Amex net at time of order placement only,  
other payment discounts do not apply ($300 credit card minimum). We reserve the right to charge 1-1/2% interest per month on past  
due balances. New orders will not be shipped while there is a past due balance. We will also ship net C.O.D. or C.I.A.  
PRICING POLICY  
This price sheet reflects current published price. All prices are subject to change without notice. All items will be billed at current prices.  
CREDIT  
Companies that have not established credit with our company should allow a sufficient period of time for credit approval. Please be sure to  
provide complete credit information, bank and trade references, plus financial statements, if available with your first order. To expedite first  
shipment, a certified or bank check with the order or use of Visa/MasterCard/Amex will avoid delays, while we are checking credit and waiting  
for bank clearance.  
FREIGHT POLICY  
All shipments are F.O.B. our New York warehouse. All orders totaling $2000 or more will be shipped freight allowed to any point in zones 1,2,3,4,5  
and 1/2 freight allowed in zones 6,7,8, providing invoice is paid within 30 days from receipt of merchandise, catalogs or exceptions from regular  
pricing. All UPS and USPS shipments will be insured with insurance fee plus shipping and handling charges added to the invoice.  
MINIMUM OPENING ORDER $1500  
We reserve the right to refuse reorders under $250. PLEASE REQUEST CONFIRMATION OF ALL FAXED PURCHASE ORDERS.  
WARRANTY  
We warranty all products to be free from any manufacturing or material defects.  
Cameras  
5 Years  
1 Year  
3 Years  
2 Years  
Lifetime  
5 Years  
This warranty will not extend to any products which have been subjected to misuse,  
neglect, accident, or improper installation, used in violation of instructions furnished by  
us; or to units which have been repaired or altered outside of the factory. This limited  
warranty does not apply to broken cases, batteries, or other physically damaged parts.  
Upon request by the customer, the company will at the customer's expense repackage  
merchandise in new cartons, replace missing accessories, and return in resalable  
condition. Unless requested, the company will replace and return all merchandise in the  
packaging in which it was received. This warranty is in lieu of all expressed warranties,  
expressed or implied, and of all obligations or liability on our part, and we  
neither assume nor authorize any representative or other person to assume for us any  
obligation or liability. In no event shall we be liable for incidental or consequential  
damages arising from the use of the product, or for any delay in the use of this product  
do to causes beyond our control. Some states do not allow limitations of how long an  
implied warranty lasts and/or do not allow the exclusion or limitation of consequential  
damages. The above limitations on implied warranty and consequential damages may  
not apply to you. This warranty gives you specific legal rights. You may have other  
rights which vary from state to state. See actual warranty statement included with  
product for limitations and exclusions where applicable. This limited warranty extends to  
products listed in the company's current price schedule.  
Monitors & IR LEDs  
DVRs / EZVR Series VDRs  
PCPro / PCL Series DVRs  
Indoor Speakers  
Outdoor/Weatherproof Speakers  
Amplifiers  
5 Years  
2 Years  
PA Horns, Microphones,  
Volume Controls  
Megaphones,  
Speaker Distribution Centers  
and Speaker Selectors  
1 Year  
Electrical Equipment Not Listed  
Above & Balance of Line  
90 Days  
RETURNS  
A written return authorization must be obtained prior to shipment. Label(s) must appear on all packages and return must be ship prepaid.  
Defective in-warranty products will be returned prepaid. Defective out-of-warranty products will be repaired at a nominal charge for parts and  
labor and returned with shipping charges added to the invoice. If you require an estimate before repair, please request.  
RETURNED GOODS POLICY  
1. RETURNS SENT WITHOUT PRIOR APPROVAL WILL NOT BE ACCEPTED. CREDIT WILL BE ISSUED UPON INSPECTION OF RETURNED UNITS.  
2. No discounted item may be returned for credit or exchange.  
3. An order of $3.00 for every $1.00 to be returned must accompany a request for return for stock adjustment.  
4. There will be a minimum charge of 15% for handling and repacking where necessary. Merchandise returned for credit or exchange with  
missing or damaged packaging or accessories will be charged accordingly. Merchandise returned for repair will be shipped back repaired  
but in the same physical condition as when received by us. If repacking or refurbishing is requested, where possible, you will be charged  
accordingly.  
5. If a credit is issued, current best quantity price or price when purchased, whichever is lower, will prevail.  
BACK ORDERS  
Products not immediately available for shipment will be back ordered and shipped as soon as available, unless we are advised to cancel back  
orders. The original order will determine basis of shipment. If the original order is freight allowed, back orders will be freight allowed. If the  
original order does not qualify for freight allowance, back orders will be shipped freight collect or shipping and handling charges added to  
the invoice.  
PROMOTIONAL MATERIAL  
Requests for nominal amounts of catalogs, brochures, promotional sheets, etc. will be supplied at no charge. Requests for bulk quantities of  
promotional materials will be billed on a cooperative 50-50 basis.  
CLAIMS  
Claims for shortage must be presented within thirty days of date of invoice. Freight damage claims and freight shortages should be filed  
directly with the carrier within seven days of receipt of shipment. No liability will be accepted for damages directly or indirectly caused from  
the use of our products or from any other cause. Our liability shall be limited to the repair and/or replacement of our products, at our option  
of found to be defective.  
NOTE: All units priced and packaged individually unless specified. Not responsible for printer errors.  
We now accept Visa/MasterCard/AMEX at time of order placement. (See terms of Payment & Credit Terms)  
For more information contact us at: Speco Technologies 200 New Highway P.O. Box 726 Amityville, N.Y. 11701-0726  
Tel. 631-957-8700 Outside Metro N.Y. 1-800-645-5516 Fax 631-957-9142 or 631-957-3880 • Web: www.specotech.com  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
200 New Highway  
Amityville, NY 11701  
631-957-8700  
1 800 645 5516  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shure Hair Dryer 27C3166 User Manual
Socket Mobile Laptop RT786 RT786EX User Manual
Sony Blu ray Player 4 145 650 111 User Manual
Sony Digital Camera 4 166 049 121 User Manual
Sony Headphones MDR EX38IP User Manual
Sony Headphones SRF HM03V User Manual
Sony Impact Driver MDS NT1 User Manual
Sony Speaker SA W303 User Manual
Sterling Plumbing Indoor Furnishings C741 User Manual
Sylvania TV DVD Combo SSL15D6 User Manual