INSTRUCTION
MANUAL
550 Line Color Dome Camera
Focus Free
CVC6146SCSFF
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
Rev. 6/9/10
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
3
Contents
Precautions
4
5
Sefety Instructions
SPECIFICATIONS
6
7
8
General Features
Menu Set Up
▶Menu Set Up
▶Lens Set Up
▶Exposure
▶Back Light
▶D-WDR
▶White Bal.
▶Day & Night
▶3DNR
10
11
12
14
17
18
19
20
21
▶Special
◈Camera Title
◈D - Effect
◈Motion
◈Privacy
◈Sync
21
24
26
27
28
28
◈Return
▶Adjust
▶Reset
▶Exit
28
29
29
30
Trouble Shooting
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Do not install the camera in
extreme temperature conditions.
Do not install the camera under
unstable lighting conditions.
Do not touch the front lens of the
camera.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to provide
ventilation when operating under high
temperatures.
Severe lighting change or flicker can
cause the camera to work improperly.
This is one of the most important parts of the
camera. Be careful not to leave
fingerprints on the lens cover.
Never keep the camera pointed
directly at strong light.
Do not drop the camera or subject
it to physical shocks.
Do not expose the camera to
radioactivity.
It can cause malfunctions to occur.
Severe lighting change or flicker can
cause the camera to work improperly.
If exposed to radioactivity the CCD
will fail.
NOTE
* If the camera is exposed to
spotlight or object reflecting strong light, smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Sefety Instructions
Precautions for use
◑
◑
◑
◑
◑
◑
This camera should be installed by qualified personnel only
There are no user serviceable parts inside
Do not disassemble this camera other than to make initial adjustments
Use a UL approved regulated 24 volt AC or 12 volt DC power supply
Use appropriate low voltage power cable to prevent fire or electrical shock
Please insure that your installation area can support the weight of the camera
Please handle this camera carefully :
◑
Do not use a strong or abrasive detergent when cleaning the camera
◑
Do not install near cooling or heating device
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
550 Line color dome camera
Focus free AI Motorized zoom Lens(2.8-10mm)
Focus Free
■
CVC6146SCSFF
0.00001LUX
x256
550
SPECIFICATIONS
MODEL
CVC6146SCSFF
1/3" SONY Super HAD CCD
Sensor
NTSC=811(H) * 508(V) / PAL=795(H) * 595(V)
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)
2:1 Interlace
Internal / Line Lock
Available
BLC / HSBLC / Off Selectable
550TV Lines(Color), 600TV Lines(B/W)
52dB (AGC Off, Weight On)
0.00001Lux(Sens-Up * 256)
ATW / AWB / Manual / AWC → SET
AUTO (1/50sec, 1/60sec ~ 1/120,000sec)
Off / Auto(Selectable limit *2 ~ *256)
High, Middle, Low, Off Selectable
Off/On (1~50 Level Adjustable)
Indoor / Outdoor / Off
On/Off (4 Zone, Alarm Output)
On/Off (8 Zone)
Off / Mirror / V-Rev / Rotate
On/Off
0~31’(Level Adjustable)
Color /BW /Auto
On(*32) / Off
256 Point (Even 128 Point, ODD 128 Point)
DC 12V
DC 12V 250mA
Focus free AI Motorized zoom Lens(2.8-10mm)
14~122ºF RH 95% Max
Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D
Backlight
Resolution
S/N (Y signal)
Min. Illumination
White Balance
Electronic Shutter Speed
Sense-Up
Gain Control
3 DNR
D-WDR
Motion Detection
Privacy
Mirror
Freeze
Sharpness
D&N Selection
Digital Zoom
Blemish Compensation
Power
Power Consumption
Lens
Operating Temperature/Humidity
Storage Temperature/Humidity
Dimension
-4~140ºF RH 95% Max
5.47"(W) * 3.82"(H) * 5.47"(D)
1.54 lb
Weight
Download from Www.Somanuals.com. All Manuals Search And Download.
General Features
Digital
Noise
Reduction
3D Filtering Method of Newly Advanced DNR Function
3D-DNR
Newly developed 3D filtering enhances Digital Noise reduction at low light levels. 3D Filtering of
the Video Signal Optimises the Signal to Noise ratio, giving vastly improved low light visivility
and a powerful Sens-Up function (up to 256 times magnification).
☞
550
550TV Lines
Horizontal
Resolution
The combination of a Sony Super HAD CCD image sen-sor and DNR DSP provides an excellent
resolution of 550 TV lines.
☞
WDR
Digital
D-WDR(Digital Wide Dynamic Range)
Wide Dynamic Range
D-WDR is a powerful and ultra advanced technology that captures cleaner and superior high
Resolution pic-tures even where images appear dark because there is a strong back light present.
☞
BLC
High Spotlight BLC Function
Backlight
Compensation
High Spotlight BLC Function is Especially Effective to Read the Number Plate of the Vehicles in
the Street or Parking Lot at Night Time. Especially Users Can Adjust and Select the Special
Required Area to Observe the Target Object Under the Strong Spots of Light Exist.
☞
Minimum
Illumination
Illumination
0.00001 Lux
With an Incredibly Minimum Illumination of Amazing 0.00001Lux can Capture Good Images Even in Extremely
Low Light Conditions and Related Noises are Significantly Reduced by the Ultra Advanced DNR(Digital Noise
Reduction) Technology.
☞
Disk Saving Effects
DISK SAVING
Advanced 3DNR technology improves picture quality and saves hard drive space, as less
noise means much smaller file sizes - much smaller than standard CCTV camera images.
☞
Additional Functions
OSD
OSD - On Screen Display menu with multi-Language support.
☞
Privacy Masking - 8 zones, Sens-Up - x256 times, Digital Zoom - x32
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Set-Up
SET UP MENU
DEFAULT SET
MENU
LENS
DC / MANUAL
DC : LEVEL (0 ~100 Adjustable)
SHUTTER : FLK/ 1/60 / 1/250, 1/500, 1/2000, 1/5000,
1/10000, 1/100000
BRIGHTNESS (0 ~100 Adjustable)
AGC : OFF / LOW / MIDDLE/ HIGH
SENS-UP : x2~ x256 Level Selectable
BLC : OFF / BLC (GAIN : LOW, MIDDLE, HIGH/ DEFAULT :
LEFT/RIGHT, WIDTH, TOP/
SHUTTER
BRIGHTNESS
AGC: ---
SENS-UP
BLC
EXPOSURE
BOTTOM, HEIGHT, RTURN) /
D-WDR
HSBLC (LEVEL : RANGE 1~8 Selectable/ DEFAULT :
LEFT/RIGHT, WIDTH, TOP/BOTTOM,
HEIGHT, RETURN)
RETURN
D-WDR : OFF / INDOOR/ OUTDOOR
RETURN
ATW/ AWB/ MANUAL(R Gain : 0 ~100 Level Selectable,
B Gain : 0 ~100 Level Selectable)
/ AWC SET
WHITE BAL.
DAY / NIGHT.
ATW
COLOR
AUTO/B/W COLOR/EXT
AUTO : DELAY (0~63) / S-LEVEL(0~100)/ E-LEVEL(0~100)
RESET
3D-DNR
ON
ON (RANGE : 0 ~100 Level Selectable) / OFF
SPECIAL
Refer to the next page
SHARPNESS
BLUE
SHARPNESS : (RANGE : 0 ~ 31 Level Adjustable)
BLUE : (RANGE : 0 ~ 100 Level Adjustable)
RED : (RANGE : 0 ~ 100 Level Adjustable)
RETURN
ADJUST
RED
RETURN
RESET
EXIT
FACTORY
Save the SETUP Menu and exit
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Menu
SPECIAL MENU
DEFAULT SET
MENU
CAMERA TITLE
D - EFFECT
OFF
ON
ON / OFF
FREEZE / MIRROR/ D-ZOOM/ GAMMA/ NEG. IMAGE
AREA SELECT : AREA 1
MOTION
ON
AREA DISPLAY : ON / OFF
LEFT / RIGHT : 0 ~ 100 Level Adjustable
WIDTH : 0 ~ 100 Level Adjustable
TOP / BOTTOM : 0 ~ 100 Level Adjustable
HEIGHT : 0 ~ 100 Level Adjustable
SENSITIVITY : 0 ~ 40 Level Adjustable
RETURN
AREA SELECT : AREA 1
PRIVACY
ON
AREA DISPLAY : ON / OFF
LEFT / RIGHT : 0 ~ 100 Level Adjustable
WIDTH : 0 ~ 100 Level Adjustable
TOP / BOTTOM : 0 ~ 100 Level Adjustable
HEIGHT : 0 ~ 100 Level Adjustable
COLOR : Selectable in 15 Color
RETURN
SYNC
INT
RETUEN
END
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Set Up
Menu items can be selected by using the OSD buttons of the camera
1. Press the Set Up button.
* The Set Up menu will be displayed on the monitor.
SETUP
LENS
DC
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
ATW
COLOR
ON
SPECIAL
ADJUST
RESET
EXIT
2. Move and select the required function using the Up and Down button.
* Move the arrow indicator Up or Down to select the desired feature by pressing
the Up or Down button.
SETUP
LENS
DC
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
ATW
COLOR
ON
SPECIAL
ADJUST
RESET
EXIT
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Changing menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After completing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.
NOTE
* Move to the available submenu by moving
arrow to desired feature.
* Submenu is not available when this symbol is display "- - - -"
Lens
1. Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen.
2. Select the desired lens type by pressing the Left or Right button.
SETUP
LENS
DC
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
ATW
COLOR
ON
SPECIAL
ADJUST
RESET
EXIT
DC:DC Auto Iris Lens
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
* When DC is selected, the brightness can be adjusted. The brightness control
range is 1 ~ 100.
Lens
BRIGHTNESS
RETURN
100
3. Press the RETURN to return to the SETUP menu.
Exposure
This function is used to select Automatic or Manual shutter speed control.
1. On the Set Up menu screen select EXPOSURE by using the Up or Down button.
2. Select the desired shutter mode by pressing the Left or Right button.
SETUP
LENS
DC
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
ATW
COLOR
ON
SPECIAL
ADJUST
RESET
EXIT
* FLK : Select FLK mode when flickering occurs; caused by the unmatched frequency of electric lights.
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPOSURE
SHUTTER
BRIGHTNESS
SENS-UP
BLC
FLK
- - - -
HIGH
AUTO
BLC
D-WDR
RETURN
OFF
NOTE
* To produce better results with FLK, do not use it in conjunction with the WDR
mode in the BACKLIGHT menu.
* Desired shutter speed can be selected by user 1/60, 1/250, 1/500, 1/2000, 1/5000,
1/0000, 1/100000, FLK .
* Brightness just can operate when selected the Manual mode(Option), When
selected DC mode, brightness will be disabled .
* AGC(AUTO GAIN CONTROL):
A higher gain increases brightness but also increases any noise.
OFF : Deactivates the AGC function
LOW : Allows automatic gain control to LOW.
MIDDLE : Allows automatic gain control to MIDDLE.
HIGH : Allows automatic gain control to HIGH
* SENS - UP:
At night and/or in dark conditions, the Sens-Up mode can be selected desired value from x2 ~ x256.
* FLK : Select FLK mode when flickering occurs; caused by the unmatched frequency of electric lights.
SENS-UP
SENS-UP
RETURN
x 2
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
* RETURN:
Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.
NOTE
* Pressing the SET button in AUTO mode allows adjustment of image brightness
by increasing or decreasing the shutter speed (x2 ~x258).
* The higher the level, the brighter the image becomes, but it is possible that an
after image (ghosting) could appear.
* When SENS-UP is activated the increased magnification can induce noise and
pixelation; this is quite normal.
Back Light(BLC)
This camera provides intelligent light level control to overcome even strong backlight conditions.
1. Move the arrow indicator to BACKLIGHT using the Up or Down button on the SETUP menu screen.
2. Select the desired level by using the Left or Right button.
EXPOSURE
SHUTTER
BRIGHTNESS
AGC
SENS-UP
BLC
1/60
- - - -
LOW
- - - -
BLC
OFF
D-WDR
RETURN
* OFF : BLC function does not operate.
* BLC : Users can select and define a specific area in a scene, and view the area clearly.
* HSBLC : When there are simultaneous brightness & dark image areas HSBLC makes both distinct.
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
BLC ON
BLC OFF
3. Select a mode using the Left and Right buttons then press the SET button.
Select BLC to adjust the desired BLC area and GAIN level.
* GAIN : Adjust the BLC sensitivity by selecting LOW, MIDDLE or HIGH.
* DEFAULT : Press the Default to back to the factory default when input the wrong data .
① Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
BLC
GAIN
LOW
DEFAULT
LEFT / RIGHT
WIDTH
7
8
7
8
TOP / BOTTOM
HEIGHT
RETURN
② Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
③ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
* Move the arrow indicator to RETURN and press the Set Up button after complete the BLC area set to
return to EXPOSURE menu.
4. Select HSBLC(High Suppress Backlight Compensation) by using the Left and Right buttons then press the
Set Up button to set up the desired HSBLC area and GAIN level.
HSBLC OFF
HSBLC ON
* LEVEL : Adjust the HSBLC sensitivity by selecting between 0~8.
* DEFAULT : Press the Default to return to the factory default when input the wrong data .
① Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
HSBLC
LEVEL
8
DEFAULT
LEFT / RIGHT
WIDTH
7
8
7
8
TOP / BOTTOM
HEIGHT
RETURN
② Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
③ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
D-WDR(digital WDR)
This camera provides intelligent light level control to overcome even strong backlight conditions.
1. Move the arrow indicator to D-WDR using the Up or Down button on the EXPOSURE menu screen.
2. Select the desired feature by using the Left or Right button.
EXPOSURE
SHUTTER
BRIGHTNESS
AGC
SENS-UP
BLC
1/60
- - - -
LOW
- - - -
BLC
OFF
D-WDR
RETURN
* D-WDR : When there are simultaneous brightness & dark image areas WDR makes both distinct and can
be selected desired feature between OUTDOOR and INDOOR.
* OFF : D-WDR function does not operate.
* RETURN: Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
White Balance
The White Balance function is used to control the “on-screen” color.
1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the Left or Right button.
SETUP
LENS
DC
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
ATW
COLOR
ON
SPECIAL
ADJUST
RESET
EXIT
* There are three user selectable White Balance settings available.
* ATW : (Auto Tracking White Balance)
Normal setting; when the color temperature range is from 1,800˚K to 10,500˚K. (Ex: a fluorescent lamp or outdoors)
* AWB : The White Balance is automatically adjusted in a specific environment.
* AWC → SET : To obtain the best results press the SET button while the camera is focused onto white
paper. If the environment, and/or light source changes, the White Balance will require re-adjustment.
* MANUAL : Used for fine adjustment of White Balance. Set White Balance first using ATW or AWC then
change to MANUAL and press SETUP button. Increase or decrease the value of R-Gain(Red) and
B-Gain(Blue) while monitoring the color of the image.
WHITE BAL MANUAL
BLUE
- - - - - - - -100
- - - - - - - -100
RED
RETURN
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Day / Night
Picture can be displayed in either color or black and white.
1. Select DAY / NIGHT using the Up or Down button on the SETUP menu screen.
SETUP
LENS
DC
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
ATW
COLOR
ON
SPECIAL
ADJUST
RESET
EXIT
2. Select the desired mode using the Left and Right buttons.
* COLOR : The picture is always displayed in color.
* BW : The White Balance is automatically adjusted in a specific environment.
* AUTO : The mode is automatically switches to color in normal conditions and switches to B/W mode when
ambient illumination is low. To set the switching time or speed in AUTO mode, press the SET button.
DAY NIGHT AUTO
DELAY
- - - - - - - - 63
- - - - - - - -100
- - - - - - - -100
S - LEVEL
E - LEVEL
RETURN
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select the desired mode and set the values by using the Left or Right button .
* DELAY : The range can be adjusted between 0 ~ 63.
* S - LEVEL : The start level can be adjusted between 0 ~ 100.
* E - LEVEL : The end level can be adjusted between 0 ~ 100.
3DNR
3DNR is used to reduce the level of background noise in a low luminance environment.
1. Move the arrow indicator to 3DNR by using the Up and Down button.
SETUP
LENS
DC
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
ATW
COLOR
ON
SPECIAL
ADJUST
RESET
EXIT
2. Select whether or not to activate 3DNR by using the Left and Right buttons.
* ON: Activates 3DNR - Digial noise reduction can be adjusted between 0 ~ 100.
* OFF: Deactivates 3DNR - noise is not reduced.
3DNR
LEVEL
- - - - - - - -100
RETURN
* Select RETURN by using the Up or Down button to return to Set Up menu.
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Special
1. When the SETUP menu screen is displayed, select SPECIAL using the Up and Down buttons.
SETUP
LENS
DC
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
ATW
COLOR
ON
SPECIAL
ADJUST
RESET
EXIT
2. Select one of the mode using the Up and Down button.
SPECIAL
1. CAM TITLE OFF
2. D - EFFECT
3. MOTION OFF
4. PRIVACY OFF
5. SYNC OFF
OFF
OFF
OFF
OFF
6. RETURN
1. CAM TITLE : When input, the Camera ID is displayed on the monitor.
1-1) Move the arrow indicator to CAMERA ID using the Up or Down button on the SETUP menu screen.
1-2) Set to ON using the Left or Right button.
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
* When CAMERA TITLE is set to OFF, the CAMERA TITLE is not displayed on the monitor.
3) Press the SETUP button.
CAMERA TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
▷
→ ← ↑ ↓ ( ) -
ㅡ _ □ / = & : ~ , .
← →
C L R
P O S
E N D
1-4) The CAMERA TITLE can be up to 15 alphanumeric characters in length.
① Move the cursor to choose an alphanumeric character.
CAMERA TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
▷
→ ← ↑ ↓ ( ) -
ㅡ _ □ / = & : ~ , .
← →
C L R
P O S
E N D
② Choose a character in displayed range A~Z, a~z, 0~9 using the Up, Down, Left and Right buttons.
③ Select the desired character by pressing the SETUP button.
- The cursor moves to the next position, after character input, by pressing the SETUP button.
④ Repeat the above steps until the Camera ID has been created.
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
* In cases where the wrong Camera ID has been input........
Move the cursor to CLR and press SETUP button to erase characters from left to
right, and repeat the above steps to input the characters again.
1-5) To select the position where the Camera ID should be displayed on the screen.
① Move the cursor to POS and press the SET button.
CAMERA TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
▷
→ ← ↑ ↓ ( ) -
ㅡ _ □ / = & : ~ , .
← →
C L R
P O S
E N D
② Created camera ID is displayed.
(Factory default position)
CAM1
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
③ Select a new position by using the four
directional button, Press the SET button to
confirm the position.
CAM1
2) D - EFFECT
Move the cursor to D-EFFECT and press the SET button to set the other image functions.
SPECIAL
1. CAM TITLE OFF
2. D - EFFECT
3. MOTION OFF
4. PRIVACY OFF
5. SYNC OFF
OFF
OFF
OFF
OFF
6. RETURN
2 -1) FREEZE : Image freezing or moving Image
D-EFFECT
1. FREEZE
2. MIRROR
3. D-ZOOM
4. GAMMA
5.. RETURN
OFF
V-FLIP
OFF
0.45
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2 -2) MIRROR : Flip the image horizontally on the screen.
D-EFFECT
1. FREEZE
2. MIRROR
3. D-ZOOM
4. GAMMA
5. RETURN
OFF
V-FLIP
OFF
0.45
* V-FLIP : Flip the image vertically on the screen.
* ROTATE : Flip the horizontal image vertically on the screen.
* OFF : Disabled.
MIRROR ON
MIRROR OFF
3) D - ZOOM: Digital zoom available, range x1 ~ x32.
PAN : The pan range can be controlled between -10 ~ + 100
TILT : The tilt range can be controlled between -10 ~ + 100
D-ZOOM
D-ZOOM
PAN
x 2.6
20
20
TILT
RETURN
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
* PAN and TILT function should be available when using the digital zoom.
2-4) GAMMA : Desired gamma values can be adjusted between 0.05 ~ 1.00.
2-5) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu.
3. MOTION
MOTION
AREA SELECT
AREA DISPLAY
LEFT / RIGHT
WIDTH
TOP / BOTTOM
HEIGHT
AREA
ON
100
100
100
100
40
SENSITIVITY
RETURN
3-1) When the special menu screen is displayed, use the Up or Down botton to access the MOTION menu.
① AREA SELECT : Determines whether the MD area selected AREA 1, 2, 3, 4.
② Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left / Right
button between the level 0 ~ 100.
③ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.
④Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right
button between the level 0 ~ 100.
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
⑤ Move the arrow indicator to select the SENSITIVITY to increase or decrease by using the Left / Right
button between the level 0 ~ 40.
RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu.
4. PRIVACY
Hide an area you want to hide on the screen.
4-1). When the SPECIAL menu screen is displayed, press the Up and Down buttons to set to PRIVACY.
SPECIAL
1. CAM TITLE OFF
2. D - EFFECT
3. MOTION OFF
4. PRIVACY OFF
5. SYNC OFF
ON
OFF
ON
OFF
6. RETURN
4-2). Set up the area mode using the 4 direction buttons.
① AREA SELECT : You can select up to 8 MD area.
PRIVACY
AREA SELECT
AREA DISPLAY
LEFT / RIGHT
WIDTH
TOP / BOTTOM
HEIGHT
AREA
ON
100
100
100
100
40
COLOR
RETURN
② AREA DISPLAY : OFF : Disabled
ON :Activates area display
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
③ Move the arrow indicator to WIDTH to make desired width of cells to increase or decrease by using the
Left / Right button between the level 0 ~ 100.
④ Move the arrow indicator to HEIGHT to make desired height of cells to increase or decrease by using the
Left / Right button between the level 0 ~ 100.
⑤ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.
⑥ Move the arrow indicator to COLOR to select the desired color of each area cells by using the Left /
Right button between the 15 different color.
RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu.
5) SYNC : INT (Internal Synchronisation)
Move the arrow indicator to RETURN after complete the setup to return to SETUP menu.
ADJUST
1. When the SETUP menu screen is displayed, select ADJUST using the Up and Down buttons.
SETUP
LENS
DC
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
ATW
COLOR
ON
SPECIAL
ADJUST
RESET
EXIT
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select the desired mode by using Up or Down button..
ADJUST
SHARPNESS
BLUE
- - - - - - - -100
- - - - - - - -100
- - - - - - - -100
RED
RETURN
SHARPNESS : Improving image clarity. The level can be adjusted to obtain an improved image. However,
when the level is set too high it can distort the image or cause noise.
* Select BLUE or RED to increase or decrease the value of R-Gain(RED) and B-Gain(BLUE) while monitoring
the color of the image.
RETURN :Move the arrow indicator to RETURN after complete the setup to return to SETUP menu.
RESET
Resets the camera settings to the factory defaults.
EXIT
Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu.
- 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Shooting
PROBLEM
POSSIBLE CAUSE
☞
Check the power cable, power supply output and video
Northing appears on
connection between the camera and monitor.
the screen.
☞
Are the camera lens or the lens glass dirty?
Clean the lens / glass with a soft clean cloth.
Adjust the monitor controls, as required.
If the camera is facing a very strong light, change
the camera position.
The image on the
screen is dim.
☞
☞
☞
Adjust the lens focus.
☞
☞
Adjust the contrast control of the monitor.
The image on the
screen is dark.
If there is an intermediate device, correctly set the 75Ω/Hi-z.
The camera is not
working properly
and the surface of
the camera is hot.
☞
Check the camera is correctly connected to an appropriate
regulated power source.
☞
☞
Has MOTION DET been set to ON in the menu?
Has MD AREA been properly defined?
Motion Detection
is not activated.
The color of the
☞
☞
Check the settings in WHITE BALANCE menu.
picture is not correct.
The image on the
screen flickers.
Make sure that the camera isn’t facing direct sunlight or
fluorescent lighting. If necessary,change the camera position.
☞
☞
Check that the AGC setting in the EXPOSURE menu is’t set to OFF.
Check the EXPOSURE menu and make sure SHUTTER is set to------.
The SENS-UP does
not work.
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT WARRANTIES AND INFORMATION EFFECTIVE JULY 8, 2008
POLICY, TERMS AND CONDITIONS OF SALE
This statement of policy is in lieu of any other policy, expressed or implied, and no representative or person is authorized to assume for us any
other liability or policy without our written consent. We cannot be held responsible for typographical errors.
TERMS OF PAYMENT
2%, 10 days, net 30 from invoice date of merchandise for qualified accounts or Visa/MasterCard/Amex net at time of order placement only,
other payment discounts do not apply ($300 credit card minimum). We reserve the right to charge 1-1/2% interest per month on past
due balances. New orders will not be shipped while there is a past due balance. We will also ship net C.O.D. or C.I.A.
PRICING POLICY
This price sheet reflects current published price. All prices are subject to change without notice. All items will be billed at current prices.
CREDIT
Companies that have not established credit with our company should allow a sufficient period of time for credit approval. Please be sure to
provide complete credit information, bank and trade references, plus financial statements, if available with your first order. To expedite first
shipment, a certified or bank check with the order or use of Visa/MasterCard/Amex will avoid delays, while we are checking credit and waiting
for bank clearance.
FREIGHT POLICY
All shipments are F.O.B. our New York warehouse. All orders totaling $2000 or more will be shipped freight allowed to any point in zones 1,2,3,4,5
and 1/2 freight allowed in zones 6,7,8, providing invoice is paid within 30 days from receipt of merchandise, catalogs or exceptions from regular
pricing. All UPS and USPS shipments will be insured with insurance fee plus shipping and handling charges added to the invoice.
MINIMUM OPENING ORDER $1500
We reserve the right to refuse reorders under $250. PLEASE REQUEST CONFIRMATION OF ALL FAXED PURCHASE ORDERS.
WARRANTY
We warranty all products to be free from any manufacturing or material defects.
Cameras
5 Years
1 Year
3 Years
2 Years
Lifetime
5 Years
This warranty will not extend to any products which have been subjected to misuse,
neglect, accident, or improper installation, used in violation of instructions furnished by
us; or to units which have been repaired or altered outside of the factory. This limited
warranty does not apply to broken cases, batteries, or other physically damaged parts.
Upon request by the customer, the company will at the customer's expense repackage
merchandise in new cartons, replace missing accessories, and return in resalable
condition. Unless requested, the company will replace and return all merchandise in the
packaging in which it was received. This warranty is in lieu of all expressed warranties,
expressed or implied, and of all obligations or liability on our part, and we
neither assume nor authorize any representative or other person to assume for us any
obligation or liability. In no event shall we be liable for incidental or consequential
damages arising from the use of the product, or for any delay in the use of this product
do to causes beyond our control. Some states do not allow limitations of how long an
implied warranty lasts and/or do not allow the exclusion or limitation of consequential
damages. The above limitations on implied warranty and consequential damages may
not apply to you. This warranty gives you specific legal rights. You may have other
rights which vary from state to state. See actual warranty statement included with
product for limitations and exclusions where applicable. This limited warranty extends to
products listed in the company's current price schedule.
Monitors & IR LEDs
DVRs / EZVR Series VDRs
PCPro / PCL Series DVRs
Indoor Speakers
Outdoor/Weatherproof Speakers
Amplifiers
5 Years
2 Years
PA Horns, Microphones,
Volume Controls
Megaphones,
Speaker Distribution Centers
and Speaker Selectors
1 Year
Electrical Equipment Not Listed
Above & Balance of Line
90 Days
RETURNS
A written return authorization must be obtained prior to shipment. Label(s) must appear on all packages and return must be ship prepaid.
Defective in-warranty products will be returned prepaid. Defective out-of-warranty products will be repaired at a nominal charge for parts and
labor and returned with shipping charges added to the invoice. If you require an estimate before repair, please request.
RETURNED GOODS POLICY
1. RETURNS SENT WITHOUT PRIOR APPROVAL WILL NOT BE ACCEPTED. CREDIT WILL BE ISSUED UPON INSPECTION OF RETURNED UNITS.
2. No discounted item may be returned for credit or exchange.
3. An order of $3.00 for every $1.00 to be returned must accompany a request for return for stock adjustment.
4. There will be a minimum charge of 15% for handling and repacking where necessary. Merchandise returned for credit or exchange with
missing or damaged packaging or accessories will be charged accordingly. Merchandise returned for repair will be shipped back repaired
but in the same physical condition as when received by us. If repacking or refurbishing is requested, where possible, you will be charged
accordingly.
5. If a credit is issued, current best quantity price or price when purchased, whichever is lower, will prevail.
BACK ORDERS
Products not immediately available for shipment will be back ordered and shipped as soon as available, unless we are advised to cancel back
orders. The original order will determine basis of shipment. If the original order is freight allowed, back orders will be freight allowed. If the
original order does not qualify for freight allowance, back orders will be shipped freight collect or shipping and handling charges added to
the invoice.
PROMOTIONAL MATERIAL
Requests for nominal amounts of catalogs, brochures, promotional sheets, etc. will be supplied at no charge. Requests for bulk quantities of
promotional materials will be billed on a cooperative 50-50 basis.
CLAIMS
Claims for shortage must be presented within thirty days of date of invoice. Freight damage claims and freight shortages should be filed
directly with the carrier within seven days of receipt of shipment. No liability will be accepted for damages directly or indirectly caused from
the use of our products or from any other cause. Our liability shall be limited to the repair and/or replacement of our products, at our option
of found to be defective.
NOTE: All units priced and packaged individually unless specified. Not responsible for printer errors.
We now accept Visa/MasterCard/AMEX at time of order placement. (See terms of Payment & Credit Terms)
For more information contact us at: Speco Technologies 200 New Highway • P.O. Box 726 • Amityville, N.Y. 11701-0726
Tel. 631-957-8700 Outside Metro N.Y. 1-800-645-5516 • Fax 631-957-9142 or 631-957-3880 • Web: www.specotech.com
- 31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
200 New Highway
Amityville, NY 11701
631-957-8700
1 800 645 5516
Download from Www.Somanuals.com. All Manuals Search And Download.
|