INSTRUCTION
MANUAL
Intense-IR Camera
CVC5815DNV / CVC5815DNVW
CVC5915DNV / CVC5915DNVW
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
Rev. 6/9/10
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
3
4
5
Contents
Precautions
Sefety Instructions
Menu Set Up
▶OSD Control Button
▶Set Up Menu
▶Menu Set Up
▶Lens
8
9
12
13
14
16
▶Exposure
▶Back Light
▶White Bal.
▶Day & Night
▶3DNR
19
20
22
23
▶Special
◈Camera Title
◈D - Effect
◈Motion
◈Privacy
◈Defect
23
26
28
29
30
▶Adjust
▶Reset
▶Exit
31
32
32
33
Trouble Shooting
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Do not install the camera in
extreme temperature conditions.
Do not install the camera under
unstable lighting conditions.
Do not touch the front lens of the
camera.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to provide
ventilation when operating under high
temperatures.
Severe lighting change or flicker can
cause the camera to work improperly.
This is one of the most important parts of the
camera. Be careful not to leave
fingerprints on the lens cover.
Never keep the camera pointed
directly at strong light.
Do not drop the camera or subject
it to physical shocks.
Do not expose the camera to
radioactivity.
It can cause malfunctions to occur.
Severe lighting change or flicker can
cause the camera to work improperly.
If exposed to radioactivity the CCD
will fail.
NOTE
* If the camera is exposed to
spotlight or object reflecting strong light, smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Sefety Instructions
Precautions for use
◑
◑
◑
◑
◑
◑
This camera should be installed by qualified personnel only
There are no user serviceable parts inside
Do not disassemble this camera other than to make initial adjustments
Use a UL approved regulated 24 volt AC or 12 volt DC power supply
Use appropriate low voltage power cable to prevent fire or electrical shock
Please insure that your installation area can support the weight of the camera
Please handle this camera carefully :
◑
Do not use a strong or abrasive detergent when cleaning the camera
◑
Do not install near cooling or heating device
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Intense - IR Hood Camera
DC Auto Iris Varifocal Lens(2.8mm-12mm) / IR LED Built-in 35pcs
CVC5815DNV
■
■
CVC5815DNVW
600TV Lines
DC Auto Iris Varifocal
Lens(2.8mm-12mm)
True Day/Night Capability
ICR-IR Cut Filter Removable
850nm IR LEDs * 35pcs
Heater 4EA
IR LED's 35EA & Heater's 4EA
SPECIFICATIONS
MODEL
CVC5815DNV / CVC5815DNVW
1/3" SONY Super HAD ll CCD
Sensor
NTSC=811(H) * 508(V) / PAL=795(H) * 595(V)
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)
2:1 Interlace
Internal / Line Lock(Option)
Available
Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D
OFF / HSBLC / BLC Selectable
600TV Lines
Backlight
Resolution
52dB (AGC Off, Weight On)
0.000006 Lux(IR LED ON)
ATW / AWB / Manual / AWC →SET
AUTO (1/50sec, 1/60sec ~ 1/100,000sec)
Off / Auto(Selectable limit *2 ~ *256)
High, Middle, Low, Off Selectable
Off/On (1~50 Level Adjustable)
Indoor / Outdoor / Off
On/Off (4 Zone)
On/Off (8 Zone)
Off / Mirror / V-Rev / Rotate
On/Off
0~31’(Level Adjustable)
S/N (Y signal)
Min. Illumination
White Balance
Electronic Shutter Speed
Sense-Up
Gain Control
3 DNR
D-WDR
Motion Detection
Privacy
Mirror
Freeze
Sharpness
Color /BW/ Auto/ EXT
On(*32) / Off
Auto:128 Point / Manual:4 Point
4EA
D&N Selection
Digital Zoom
Blemish Compensation
Heater
DC 12V / AC24V(Dual Voltage)
DC 12V 450mA(CDS OFF,Heater ON) / 950mA(CDS ON,Heater ON)
Heater ON Adj:500~950mA
AC 24V 170mA(CDS OFF,Heater ON) / 330mA(CDS ON,Heater ON)
Heater ON Adj:200~330mA
DC Auto Iris Varifocal Lens(2.8mm-12mm)
20m
-10˚C ~ +50˚C. RH 95% Max.
-20˚C ~ +60˚C. RH 95% Max.
88mm(W) * 105mm(H) * 222mm(D)
1600g
Power
Power Consumption
Lens
IR Distance
Operating Temperature/Humidity
Storage Temperature/Humidity
Dimension
Weight
Download from Www.Somanuals.com. All Manuals Search And Download.
Intense - IR Hood Camera
DC Auto Iris Varifocal Lens(5mm-50mm) / IR LED Built-in 35pcs
CVC5915DNV
■
■
CVC5915DNVW
600TV Lines
DC Auto Iris Varifocal
Lens(5mm-50mm)
True Day/Night Capability
ICR-IR Cut Filter Removable
850nm IR LEDs * 35pcs
Heater 4EA
IR LED's 35EA & Heater's 4EA
SPECIFICATIONS
MODEL
CVC5915DNV / CVC5915DNVW
1/3" SONY Super HAD ll CCD
Sensor
NTSC=811(H) * 508(V) / PAL=795(H) * 595(V)
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)
2:1 Interlace
Internal / Line Lock(Option)
Available
Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D
OFF / HSBLC / BLC Selectable
600TV Lines
Backlight
Resolution
52dB (AGC Off, Weight On)
0.000006 Lux(IR LED ON)
ATW / AWB / Manual / AWC →SET
AUTO (1/50sec, 1/60sec ~ 1/100,000sec)
Off / Auto(Selectable limit *2 ~ *256)
High, Middle, Low, Off Selectable
Off/On (1~50 Level Adjustable)
Indoor / Outdoor / Off
On/Off (4 Zone)
On/Off (8 Zone)
Off / Mirror / V-Rev / Rotate
On/Off
0~31’(Level Adjustable)
Color /BW/ Auto/ EXT
On(*32) / Off
Auto:128 Point / Manual:4 Point
4EA
DC 12V / AC24V(Dual Voltage)
DC 12V 450mA(CDS OFF,Heater ON) / 950mA(CDS ON,Heater ON)
Heater ON Adj:500~950mA
S/N (Y signal)
Min. Illumination
White Balance
Electronic Shutter Speed
Sense-Up
Gain Control
3 DNR
D-WDR
Motion Detection
Privacy
Mirror
Freeze
Sharpness
D&N Selection
Digital Zoom
Blemish Compensation
Heater
Power
AC 24V 170mA(CDS OFF,Heater ON) / 330mA(CDS ON,Heater ON)
Heater ON Adj:200~330mA
Power Consumption
DC Auto Iris Varifocal Lens(5mm-50mm)
20m
-10˚C ~ +50˚C. RH 95% Max.
-20˚C ~ +60˚C. RH 95% Max.
88mm(W) * 105mm(H) * 222mm(D)
1600g
Lens
IR Distance
Operating Temperature/Humidity
Storage Temperature/Humidity
Dimension
Weight
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Control Button
1. Type A, Type B, Type C of OSD button could be used when it needs to
OSD control.
2. Type D is extra Option (wired Remote controller)
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set Up the camera menu
●
Setup Menu
;ͶͿΆ
ͳͺ΅ͿͶ΄΄͙͑͡ί͑͢͡͡ͲΕΛΦΤΥΒΓΝΖ͚
΄Ͷ΅͑Ά͑;ͶͿΆ
͵ͶͷͲΆͽ΅͑΄Ͷ΅
͵ʹ
Ͷ΅
ͶͿ͵
ͽͶͿ΄
Ͷ΅ΆͿ
;ͲͿΆͲͽ
ͲΆ΅ͧͦ͑͢͢͝͠͡͝͠͡͝ͷͽͼ͑ͣͦ͑ͦ͑͑ͣ͑ͦ͢͢͢͢͢͢͝͠͡͝͠͡͡͝͠͡͡͡͝͠͡͡͡͝͠͡͡͡͝
͑͢͢͢͢͠͡͡͡͡͝͠͡͡͡͡͡͝Ωͣͦͧ͑͝Ωͣͩ͑͢͝Ωͧͥ͑͝Ωͤͣ͑͝Ωͧ͑͢͝Ωͩ͑͝Ωͥ͑͝Ωͣ
΄Ά΅΅Ͷ
ͷͷ
ͽΈ͑
Ͳʹ
;ͺ͵͵ͽͶ
ͺ
ͷͷ
΄ͶͿ΄Ͷ͞Ά͙Ωͣ͑ί͑Ωͣͦͧ͑ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ͚
΄ͶͿ΄Ͷ͞Ά
ͲΆ΅
ͷͷ
Ͷ΅
ͶͿ͵
Ͷ΅ΆͿ
ͽΈ
ͲͺͿ
;ͺ͵͵ͽͶ
ͺ
΄ͺ΅ͺͿ
΄ͺͶ
ͳͽʹ
ͲͶͲ
ͲͲͺͿ
͵ͶͷͲΆͽ΅
Ͷ΅ΆͿ
ͽͶ·Ͷͽ
Ͷ΅
ͳͽʹ
ͶͿ͵
ͶΉ΄ΆͶ
͡ίͩ͑΄ΖΝΖΔΥΒΓΝΖ
Ͳͽͽ͑͵ͲΊ
Ϳͺ΅͑ͿͽΊ
΄ͺ΅ͺͿ
΄ͺͶ
;͵Ͷ
΄ͳͽʹ
ͲͶͲ
ͲͲͺͿ
͵ͶͷͲΆͽ΅
Ͷ΅ΆͿ
Ͷ΅
ͶͿ͵
ͽΈ͞ͽͶ·Ͷͽ͙͑͑͡ίͦ͑͢ͲΕΛΦΤΥΒΓΝΖ͚
ͺ͞ͽͶ·Ͷͽ͙͑͑͡ίͦ͑͢ͲΕΛΦΤΥΒΓΝΖ͚
ͺͿ͵
Ͷ΅
Ͷ΅ΆͿ
ͶͿ͵
͵͞Έ͵
ͽΈ͞ͽͶ·Ͷͽ͙͑͑͡ίͦ͑͢ͲΕΛΦΤΥΒΓΝΖ͚
ͺ͞ͽͶ·Ͷͽ͙͑͑͡ίͦ͑͢ͲΕΛΦΤΥΒΓΝΖ͚
Ά΅͵
Ͷ΅
Ͷ΅ΆͿ
ͶͿ͵
ͷͷ
Ͷ΅
ͶͿ͵
Ͷ΅ΆͿ
Ͳ΅Έ
ͲΈͳ
ͲΈʹͯ͞΄Ͷ΅
ͳͽΆͶ͙͑͑͡ί͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ͚
Ͷ͵͙͑͑͡ί͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ͚
Έͺ΅Ͷ͑ͳͲͽ
;ͲͿΆͲͽ
Ͷ΅
Ͷ΅ΆͿ
ͶͿ͵
ͺͿ͵
Ά΅͵
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ʹͽ
ͲΆ΅
ͶΉ΅
͵ͶͽͲΊ͙͑͑͡ίͧͤ͑ͲΕΛΦΤΥΒΓΝΖ͚
͵ͯ͞Ϳ͙Ͳʹ͚͙͑ͥͩ͑ίͣͩ͑͡ͲΕΛΦΤΥΒΓΝΖ͚
Ϳͯ͞͵͙Ͳʹ͚͙͑͑͡ίͧ͑͢͡ͲΕΛΦΤΥΒΓΝΖ͚
Ͷ΅͑
Ͷ΅ΆͿ
ͶͿ͵
͵ͲΊ͠Ϳͺ΅
ͳΆ΄΅
Ϳ͠ͷͷ
Ϳ
ͲͺͿ
ͲͶͲ
ͳ͠Έ
ͺ͑΄;Ͳ΅
Ͷ΅ΆͿ͙͑Ͷ΅͠ͶͿ͵͚
ͷͷ
ͽͶ·Ͷͽ͙͑ͲͿͶ͑͑͡ί͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ͚
Ϳ
Ͷ΅
Ͷ΅ΆͿ
ͤ͵Ϳ
ͶͿ͵
ͷͷ
ʹͲ;͑΅ͺ΅ͽͶ
Ϳ͠ͷͷ
ͷͶͶͶ
Ϳ͠ͷͷ
;ͺ
·͞ͷͽͺ
΅Ͳ΅Ͷ
ͷͷ
;ͺ
͵͞;͙͑Ω͑͢ί͑Ω͚ͤͣ
ͲͿ͙͑͑͢͞͡͡ί͚͑͢͡͡
΅ͺͽ΅͙͑͑͢͞͡͡ί͚͑͢͡͡
Ͷ΅ΆͿ͙͑Ͷ΅͠ͶͿ͵͚
͵͞ͶͷͷͶʹ΅
͵͞;
Ϳ
ͿͶ͑͟ͺ;ͲͶ
Ͷ΅ΆͿ
Ϳ͠ͷͷ
Ͷ΅
ͶͿ͵
ʹͲ;͑ͺ͵
ͺ͵͑͵ͺ΄ͽͲΊ
ͳͲΆ͵Ͳ΅Ͷ
Ͷ΅ΆͿ
Ϳ͠ͷͷ
΄ͥͩͦ
͙΅ͺͿ͚
Ͷ΅
ͶͿ͵
ͲͶͲ͑΄ͶͽͶʹ΅͙͑ͲͶͲ͑͢ί͑ͲͶͲ͚ͥ
΄ͺ΅ͺͿ
ͲͶͲ͑͵ͺ΄ͽͲΊ
΄ͺͶ
΄ͶʹͺͲͽ
ͲͲͺͿ
Ϳ
;΅ͺͿ
΄ͶͿ΄ͺ΅ͺ·ͺ΅Ί͙͑͑͡ί͚͑ͥ͡
;΅ͺͿ͑·ͺͶΈ
Ͷ΅ΆͿ
Ϳ͠ͷͷ
Ͷ΅
ͶͿ͵
ͷͷ
Ϳ
ͲͶͲ͑΄ͶͽͶʹ΅
ͲͶͲ͑͵ͺ΄ͽͲΊ
΄ͺ΅ͺͿ
΄ͺͶ
ͲͲͺͿ
ͺ·ͲʹΊ
ʹͽ
Ͷ΅ΆͿ
Ͷ΅
ͶͿ͵
ͷͷ
ͺͿ΅
ͽ͠ͽ
΄ΊͿʹ
͙΅ͺͿ͚
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
΄ͶͿ΄Ͷ͞Ά͙͑Ωͥ͑ί͑Ω͚ͧͥ
͵ͺͷͷͶͶͿʹͶ͙͑͑͢ί͚ͧ
΄΅Ͳ΅
͵ͶͷͶʹ΅
Ͷ΅
ͶͿ͵
Ͷ΅ΆͿ
Ͷ΅
ͶͿ͵
Ͷ΅ΆͿ
͑͡ίͤ͑͢ͽΖΧΖΝ͑ͲΕΛΦΤΥΒΓΝΖ
ͽͶ·Ͷͽ͙͑͑͡ί͚ͧͤ
΄ͲͿͶ΄΄
ͳͽΆͶ͑ͲͺͿ͙͑͑͡ί͚͢͡͡
Ͷ͵͑ͲͺͿ͙͑͑͡ί͚͢͡͡
ʹ΅
Ͷ΅
ͶͿ͵
Ͷ΅ΆͿ
Ͳ;;Ͳ͙͑Ά΄Ͷ͑ί͚͑͢͟͡͡
ͽͶ·Ͷͽ͙͑͑͡ί͚ͧͤ
ͳͽΆͶ͑ͲͺͿ͙͑͑͡ί͚͢͡͡
Ͷ͵͑ͲͺͿ͙͑͑͡ί͚͢͡͡
ͽʹ͵
;Ϳͺ΅
Ͳ͵ͻΆ΄΅
Ͷ΅
ͶͿ͵
Ͷ΅ΆͿ
Ͳ;;Ͳ͙͑Ά΄Ͷ͑ί͚͑͢͟͡͡
ͽͶ·Ͷͽ͙͑͑͡ί͚ͧͤ
ͳͽΆͶ͑ͲͺͿ͙͑͑͡ί͚͢͡͡
Ͷ͵͑ͲͺͿ͙͑͑͡ί͚͢͡͡
Ά΄Ͷ
Ͷ΅
ͶͿ͵
Ͷ΅ΆͿ
Ͷ΅
Ͷ΅ΆͿ
ͶͿ͵
Ͷ΄Ͷ΅
Ͷ΅
ͷͲʹ΅Ί
Ͷ΅ΆͿ
Ͷ΄Ͷ΅
ͶΉͺ΅
ͶͿ͵
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Set Up
Menu items can be selected by using the OSD buttons of the camera
1. Press the Set Up button.
* The Set Up menu will be displayed on the monitor.
SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
ATW
COLOR
ON
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
2. Move and select the required function using the Up and Down button.
* Move the arrow indicator Up or Down to select the desired feature by pressing
the Up or Down button.
SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
ATW
COLOR
ON
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Change menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After Changing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.
NOTE
* Move to the available submenu by moving
arrow to desired feature.
* Submenu is not available when this symbol is display "- - - -"
Lens
1. Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen.
2. Select the desired lens type by pressing the Left or Right button.
SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
ATW
COLOR
ON
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC:DC Auto Iris Lens
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
* When DC is selected, the brightness can be adjusted. The brightness control
range is 1 ~ 100.
Lens
BRIGHTNESS
RETURN
100
3. Press the RETURN to return to the SETUP menu.
Exposure
This function is used to select Automatic or Manual shutter speed control.
1. On the Set Up menu screen select EXPOSURE by using the Up or Down button.
2. Select the desired shutter mode by pressing the Left or Right button.
SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
ATW
COLOR
ON
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
* FLK : Select FLK mode when flickering occurs; caused by the unmatched frequency of electric lights.
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPOSURE
SHUTTER
AGC
SENS-UP
BLC
AUTO
MIDDLE
AUTO
OFF
D-WDR
RETURN
OFF
RET
NOTE
*Shutter: Select Shutter using the Up or Down button, you can adjust the shutter speed
from 1/60, FLK, 1/250~1/100,000.
→FLK: Select FLK mode if flickering occurs; caused by the unmatched frequency of electric
light. If select FLK mode, sense-up does not operate.
* AGC(AUTO GAIN CONTROL):
A higher gain increases brightness but also increases any noise.
OFF : Deactivates the AGC function
LOW : Sets automatic gain control to LOW.
MIDDLE : Sets automatic gain control to MIDDLE.
HIGH : Sets automatic gain control to HIGH
* SENS - UP:
At night and/or in dark conditions, the Sens-Up mode can be selected to desired value from x2 ~ x256.
SENS-UP
SENS-UP
RETURN
x 4
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
* RETURN:
Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.
NOTE
* Pressing the SET button in AUTO mode allows adjustment of image brightness
by increasing or decreasing the shutter speed (x2 ~x256).
* The higher the level, the brighter the image becomes, but it is possible that an
after image (ghosting) could appear.
* When SENS-UP is activated the increased magnification can induce noise and
pixelation; this is quite normal.
Back Light(BLC)
This camera witch is using 3D-DNR DSP provides intelligent light level control to overcome
even strong backlight conditions.
BLC
GAIN
AREA
DEFAULT
RETURN
MIDDLE
RET
* OFF: BLC function does not operate.
* BLC: Select LOW/MID/HIGH
User can select and define a specific area in scene and view the area clearly.
Press the "ENTER" button at the AREA menu, you can change the area like a picture 1.
Press the "ENTER" button again after area setting, you can change the area like a picture 2.
Default: Press the Default to return to factory defaults.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
POSITION
SIZE
PICTURE 1
PICTURE 2
* HSBLE: HSBLC function is especially effective for reading car number plates at the night time.
You can select and define the required observation area for the target object and ignore a strong light area.
Press the "ENTER" button at the AREA menu, you can change the position as shown in Picture 1.
Press the "ENTER" button again after area setting, you can change the position as shown in Picture 2.
Default: Press the Default to return to factory defaults.
HSBLC
LEVEL
5
MODE
ALL DAY
RET
AREA
DEFAULT
RETURN
POSITION
SIZE
PICTURE 1
PICTURE 2
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
HSBLC OFF
HSBLC ON
* D-WDR: This camera which is using 3D-DNR DSP provides intelligent light level control to overcome even
strong backlight conditions.
→OFF: D-WDR function does not operate.
When there are simultaneous bright & dark image area WDR makes them both distinct and can be selected
as OUTDOOR and INDOOR.
D-WDR
LOW-LEVEL
HIGH-LEVEL
RETURN
5
5
RET
D-WDR OFF
D-WDR ON
* RETURN: Select Return to save the changes in the EXPOSURE menu and return to the SETUP menu.
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
White Balance
The White Balance function is used to control the “on-screen” colors.
1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the Left or Right button.
SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
ATW
COLOR
ON
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
* There are three user selectable White Balance settings available.
* ATW : (Auto Tracking White Balance)
Normal setting; when the color temperature range is from 1,800˚K to 10,500˚K. (Ex: a fluorescent lamp or outdoors)
* AWB : The White Balance is automatically adjusted in a specific environment.
* AWC → SET : To obtain the best results press the SET button while the camera is focused onto white
paper. If the environment, and/or light source changes, the White Balance will require re-adjustment.
* MANUAL : Used for fine adjustment of White Balance. Set White Balance first using ATW or AWC then
change to MANUAL and press SETUP button. Increase or decrease the value of R-Gain(Red) and
B-Gain(Blue) while monitoring the color of the image.
WHITE BAL MANUAL
BLUE
40
21
RED
RETURN
RET
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Day / Night
Picture can be displayed in either colour of black and white.
1. Select DAY / NIGHT using the Up or Down button on the SETUP menu screen.
SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
ATW
AUTO
ON
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
2. Select the desired mode using the Left and Right buttons.
* COLOR : The picture is always displayed in color.
* BW : This picture is always displayed in black and white.
Select BW using the button and press the menu to activate COLOR BURST option.
IR SMART : It controls the IR LED(bright portion base), satuation is not expected.
DAY NIGHT
B/W
BURST
ON
IR SMART
RETURN
ON
RET
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
IR SMART
GAIN
10
SIZE
AREA
RETURN
RET
AREA
SMART IR OFF
SMART IR ON
→ AUTO: The mode will automatically switches to COLOR in normal condition and switches to BW mode
when ambient illumination is low.
Press the SET button to set the switching time or D→N(AGC), N→D(AGC) in AUTO mode.
DAY & NIGHT
AUTO
RET
DELAY
5
D→N(AGC)
N→D(AGC)
RETURN
170
70
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3DNR
3DNR is used to reduce the level of background noise in a low luminance environment.
1. Move the arrow indicator to 3DNR by using the Up and Down button.
SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
ATW
AUTO
ON
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
2. Select whether or not to activate 3DNR by using the Left and Right buttons.
* ON: Activates 3DNR - Digial noise reduction can be adjusted between 0 ~ 100.
* OFF: Deactivates 3DNR - noise is not reduced.
3DNR
LEVEL
50
RETURN
RET
* Select RETURN by using the Up or Down button to return to Set Up menu.
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Special
When the SETUP menu screen is displayed, select SPECIAL using the Up and Down buttons.
SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
ATW
AUTO
ON
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
Select one of the mode using the Up and Down button.
SPECIAL
1. CAM TITLE
2. D - EFFECT
3. MOTION
OFF
OFF
OFF
4. PRIVACY
5. DEFECT
6. RETURN
RET
1. CAM TITLE : When input, the Camera ID is displayed on the monitor.
1-1) Move the arrow indicator to CAMERA ID using the Up or Down button on the SETUP menu screen.
1-2) Set to ON using the Left or Right button.
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
* When CAMERA TITLE is set to OFF, the CAMERA TITLE is not displayed on the monitor.
1-3) Press the SETUP button.
CAMERA TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
▷
→ ← ↑ ↓ ( ) -
ㅡ _ □ / = & : ~ , .
← →
C L R
P O S
E N D
1-4) The CAMERA TITLE can be up to 15 alphanumeric characters in length.
① Move the cursor to choose an alphanumeric character.
CAMERA TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
▷
→ ← ↑ ↓ ( ) -
ㅡ _ □ / = & : ~ , .
← →
C L R
P O S
E N D
② Choose a character in displayed range A~Z, a~z, 0~9 using the Up, Down, Left and Right buttons.
③ Select the desired character by pressing the SETUP button.
- The cursor moves to the next position, after character input, by pressing the SETUP button.
④ Repeat the above steps until the Camera ID has been created.
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
* In cases where the wrong Camera ID has been input........
Move the cursor to CLR and press SETUP button to erase characters from left to
right, and repeat the above steps to input the characters again.
1-5) To select the position where the Camera ID should be displayed on the screen.
① Move the cursor to POS and press the SET button.
CAMERA TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
▷
→ ← ↑ ↓ ( ) -
ㅡ _ □ / = & : ~ , .
← →
C L R
P O S
E N D
② Created camera ID is displayed.
(Factory default position)
CAM1
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
③ Select a new position by using the four
directional button, Press the SET button to
confirm the position.
CAM1
2. D - EFFECT
Move the cursor to D-EFFECT and press the SET button to set the other image functions.
D-EFFECT
FREEZE
MIRROR
D-ZOOM
RETURN
OFF
OFF
OFF
RET
2 -1) MIRROR : Flip the image horizontally on the screen.
D-EFFECT
FREEZE
MIRROR
D-ZOOM
RETURN
OFF
OFF
OFF
RET
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
* V-FLIP : Flip the image vertically on the screen.
* ROTATE : Flip the horizontal image vertically on the screen.
* OFF : Disabled.
MIRROR ON
MIRROR OFF
2-2) D - ZOOM: Digital zoom available, range x1 ~ x32.
PAN : The pan range can be controlled between -10 ~ + 100
TILT : The tilt range can be controlled between -10 ~ + 100
D-ZOOM
D-ZOOM
PAN
X 10
TILT
RETURN
RET
NOTE
* PAN and TILT function should be available when using the digital zoom.
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2-3) GAMMA : Desired gamma values can be adjusted between 0.05 ~ 1.00.
2-4) NEG. IMAGE :
ON : Activates negative image just like film
OFF : Normal image
2-5) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu.
3. MOTION
MOTION
AREA SELECT
AREA DISPLAY
SENSITIVITY
MOTION VIEW
RETURN
AREA1
ON
40
OFF
RET
POSITION
SIZE
3-1) When the special menu screen is displayed, use the Up or Down botton to access the MOTION menu.
AREA SELECT : You can select from area 1~4 position.
AREA DISPLAY) ON: Display the Motion Detected area on the screen. You can set the location and size like a picture 1,2.
SENSITIVITY: To setup the motion sensitivity. You can adjust the motion sensitivity of a movement between
level 0~40.
MOTION VIEW : If camera detects movement, the words of "MOTION DETECTION" will appear on the monitor.
RETURN : To return to the SPECIAL menu after completing the setup.
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
4. PRIVACY
Hide an area you want to hide on the screen.
4-1). When the SPECIAL menu screen is displayed, press the Up and Down buttons to set to PRIVACY.
PRIVACY
AREA SELECT
AREA DISPLAY
COLOR
AREA1
ON
15
RETURN
RET
POSITION
SIZE
4-2). Set up the area mode using the 4 direction buttons.
① AREA SELECT : You can select up to 8 MD area.
② AREA DISPLAY : OFF : Disabled
ON :Activates area displa
- 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
③ Move the arrow indicator to WIDTH to make desired width of cells to increase or decrease by using the
Left / Right button between the level 0 ~ 100.
④ Move the arrow indicator to HEIGHT to make desired height of cells to increase or decrease by using the
Left / Right button between the level 0 ~ 100.
⑤ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.
⑥ Move the arrow indicator to COLOR to select the desired color of each area cells by using the Left /
Right button to select between the 15 different color.
RETURN : Move the arrow indicator to RETURN after completing the setup to return to SPECIAL menu.
4-3) SYNC : INT (Internal Synchronisation)
Move the arrow indicator to RETURN after complete the setup to return to SETUP menu.
5. DEFECT
You can eliminate white spots (defect) up to max 128 point.
SENSE-UP : To eliminate defect, set the high level of sense-up. You can set to max 64x, but 32x is best
to eliminate defect.
DIFF : You can set the size of DEFECT from 1 to 6.
START : Press the "ENTER" button, it will start to eliminate defects "PROCESSING NOW..." will be displayed
on the monitor.
In case of manual IRIS lens, you should cover the lens.
DEFECT
SENSE-UP
DIFF
START
x32
COVER THE LENS
THEN
4
PROCESSING NOW...
RETURN
RET
PRESS ENTER KEY
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST
1. When the SETUP menu screen is displayed, select ADJUST using the Up and Down buttons.
SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
ATW
AUTO
ON
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
2. Select the desired mode by using Up or Down button..
ADJUST
20
SHARPNESS
MONITOR
RETURN
LCD
RET
SHARPNESS : Improving image clarity. The level can be adjusted to obtain an improved image.
However, when the level is set too high it can distort the image or cause noise.
You can adjust from level 1 to 31, and can set to monitor function as LCD, CRT and USER.
MONITOR
LCD
0.50
MONITOR
CRT
MONITOR
USER
0.50
GAMMA
LEVEL
BLUE GAIN
RED GAIN
RETURN
LEVEL
GAMMA
LEVEL
BLUE GAIN
RED GAIN
RETURN
20
20
92
BLUE GAIN
RED GAIN
RETURN
20
20
92
20
20
92
RET
RET
RET
- 31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
RESET
Resets the camera settings to the factory defaults.
SETUP
RESET
1.LENS
DC
FACTORY
RETURN
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
RET
ATW
AUTO
ON
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
EXIT
Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu.
SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
ATW
AUTO
ON
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
- 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Shooting
PROBLEM
POSSIBLE CAUSE
☞
Check the power cable, power supply output and video
Northing appears on
connection between the camera and monitor.
the screen.
☞
Are the camera lens or the lens glass dirty?
Clean the lens / glass with a soft clean cloth.
Adjust the monitor controls, as required.
If the camera is facing a very strong light, change
the camera position.
The image on the
screen is dim.
☞
☞
☞
Adjust the lens focus.
☞
☞
Adjust the contrast control of the monitor.
The image on the
screen is dark.
If there is an intermediate device, correctly set the 75Ω/Hi-z.
The camera is not
working properly
and the surface of
the camera is hot.
☞
Check the camera is correctly connected to an appropriate
regulated power source.
☞
☞
Has MOTION DET been set to ON in the menu?
Has MD AREA been properly defined?
Motion Detection
is not activated.
The color of the
☞
☞
Check the settings in WHITE BALANCE menu.
picture is not correct.
The image on the
screen flickers.
Make sure that the camera isn’t facing direct sunlight or
fluorescent lighting. If necessary,change the camera position.
☞
☞
Check that the AGC setting in the EXPOSURE menu is’t set to OFF.
Check the EXPOSURE menu and make sure SHUTTER is set to------.
The SENS-UP does
not work.
- 33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT WARRANTIES AND INFORMATION EFFECTIVE JULY 8, 2008
POLICY, TERMS AND CONDITIONS OF SALE
This statement of policy is in lieu of any other policy, expressed or implied, and no representative or person is authorized to assume for us any
other liability or policy without our written consent. We cannot be held responsible for typographical errors.
TERMS OF PAYMENT
2%, 10 days, net 30 from invoice date of merchandise for qualified accounts or Visa/MasterCard/Amex net at time of order placement only,
other payment discounts do not apply ($300 credit card minimum). We reserve the right to charge 1-1/2% interest per month on past
due balances. New orders will not be shipped while there is a past due balance. We will also ship net C.O.D. or C.I.A.
PRICING POLICY
This price sheet reflects current published price. All prices are subject to change without notice. All items will be billed at current prices.
CREDIT
Companies that have not established credit with our company should allow a sufficient period of time for credit approval. Please be sure to
provide complete credit information, bank and trade references, plus financial statements, if available with your first order. To expedite first
shipment, a certified or bank check with the order or use of Visa/MasterCard/Amex will avoid delays, while we are checking credit and waiting
for bank clearance.
FREIGHT POLICY
All shipments are F.O.B. our New York warehouse. All orders totaling $2000 or more will be shipped freight allowed to any point in zones 1,2,3,4,5
and 1/2 freight allowed in zones 6,7,8, providing invoice is paid within 30 days from receipt of merchandise, catalogs or exceptions from regular
pricing. All UPS and USPS shipments will be insured with insurance fee plus shipping and handling charges added to the invoice.
MINIMUM OPENING ORDER $1500
We reserve the right to refuse reorders under $250. PLEASE REQUEST CONFIRMATION OF ALL FAXED PURCHASE ORDERS.
WARRANTY
We warranty all products to be free from any manufacturing or material defects.
Cameras
5 Years
1 Year
3 Years
2 Years
Lifetime
5 Years
This warranty will not extend to any products which have been subjected to misuse,
neglect, accident, or improper installation, used in violation of instructions furnished by
us; or to units which have been repaired or altered outside of the factory. This limited
warranty does not apply to broken cases, batteries, or other physically damaged parts.
Upon request by the customer, the company will at the customer's expense repackage
merchandise in new cartons, replace missing accessories, and return in resalable
condition. Unless requested, the company will replace and return all merchandise in the
packaging in which it was received. This warranty is in lieu of all expressed warranties,
expressed or implied, and of all obligations or liability on our part, and we
neither assume nor authorize any representative or other person to assume for us any
obligation or liability. In no event shall we be liable for incidental or consequential
damages arising from the use of the product, or for any delay in the use of this product
do to causes beyond our control. Some states do not allow limitations of how long an
implied warranty lasts and/or do not allow the exclusion or limitation of consequential
damages. The above limitations on implied warranty and consequential damages may
not apply to you. This warranty gives you specific legal rights. You may have other
rights which vary from state to state. See actual warranty statement included with
product for limitations and exclusions where applicable. This limited warranty extends to
products listed in the company's current price schedule.
Monitors & IR LEDs
DVRs / EZVR Series VDRs
PCPro / PCL Series DVRs
Indoor Speakers
Outdoor/Weatherproof Speakers
Amplifiers
5 Years
2 Years
PA Horns, Microphones,
Volume Controls
Megaphones,
Speaker Distribution Centers
and Speaker Selectors
1 Year
Electrical Equipment Not Listed
Above & Balance of Line
90 Days
RETURNS
A written return authorization must be obtained prior to shipment. Label(s) must appear on all packages and return must be ship prepaid.
Defective in-warranty products will be returned prepaid. Defective out-of-warranty products will be repaired at a nominal charge for parts and
labor and returned with shipping charges added to the invoice. If you require an estimate before repair, please request.
RETURNED GOODS POLICY
1. RETURNS SENT WITHOUT PRIOR APPROVAL WILL NOT BE ACCEPTED. CREDIT WILL BE ISSUED UPON INSPECTION OF RETURNED UNITS.
2. No discounted item may be returned for credit or exchange.
3. An order of $3.00 for every $1.00 to be returned must accompany a request for return for stock adjustment.
4. There will be a minimum charge of 15% for handling and repacking where necessary. Merchandise returned for credit or exchange with
missing or damaged packaging or accessories will be charged accordingly. Merchandise returned for repair will be shipped back repaired
but in the same physical condition as when received by us. If repacking or refurbishing is requested, where possible, you will be charged
accordingly.
5. If a credit is issued, current best quantity price or price when purchased, whichever is lower, will prevail.
BACK ORDERS
Products not immediately available for shipment will be back ordered and shipped as soon as available, unless we are advised to cancel back
orders. The original order will determine basis of shipment. If the original order is freight allowed, back orders will be freight allowed. If the
original order does not qualify for freight allowance, back orders will be shipped freight collect or shipping and handling charges added to
the invoice.
PROMOTIONAL MATERIAL
Requests for nominal amounts of catalogs, brochures, promotional sheets, etc. will be supplied at no charge. Requests for bulk quantities of
promotional materials will be billed on a cooperative 50-50 basis.
CLAIMS
Claims for shortage must be presented within thirty days of date of invoice. Freight damage claims and freight shortages should be filed
directly with the carrier within seven days of receipt of shipment. No liability will be accepted for damages directly or indirectly caused from
the use of our products or from any other cause. Our liability shall be limited to the repair and/or replacement of our products, at our option
of found to be defective.
NOTE: All units priced and packaged individually unless specified. Not responsible for printer errors.
We now accept Visa/MasterCard/AMEX at time of order placement. (See terms of Payment & Credit Terms)
For more information contact us at: Speco Technologies 200 New Highway • P.O. Box 726 • Amityville, N.Y. 11701-0726
Tel. 631-957-8700 Outside Metro N.Y. 1-800-645-5516 • Fax 631-957-9142 or 631-957-3880 • Web: www.specotech.com
- 34 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- MEMO -
- 35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- MEMO -
- 36 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- MEMO -
- 37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- MEMO -
- 38 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- MEMO -
- 39 -
Download from Www.Somanuals.com. All Manuals Search And Download.
200 New Highway
Amityville, NY 11701
631-957-8700
1 800 645 5516
Download from Www.Somanuals.com. All Manuals Search And Download.
|