Thank you for purchasing our product
.
Please read this User’s Manual before
using the product
without notice.
.
Changes may be made
VM15LCD, VM17LCD, VM19LCD
LCD MONITOR
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
type plug has two blades and a third grounding prong.
● This monitor is designed to operate on 100-240V AC supply. Do not
connect too many appliances to the same outlet as this can cause electric
shock.
4
3
EANING
MOUNTING
● Unplug the unit from the wall outlet before cleaning.
● Do not use liquid or aerosol cleaners. Use a dry soft lint-free cloth for
cleaning. If the dust is persistent, wipe with a slightly damp cloth.
● Place the monitor on a secure table or have it properly mounted to the
wall. Do not hang anything on the monitor.
Caution: The wall mount must bear a minimum of five times the monitor’s
net weight without causing damage. To mount your monitor to the wall,
you will need to remove the base before attaching the wall mount.
SERVICE
● Use only the power source and connections appropriate for the monitor as
indicated on the marking label.
A. Place the monitor face down on a surface that is soft, yet strong enough
to hold the monitor.
● If the power cord or plug is damaged, liquid has been spilled,
objects have fallen into the apparatus, apparatus has been exposed to
rain or moisture, does not operate manually, or has been dropped, the
product needs servicing.
B. Use a screwdriver to remove the screws from the four holes on each side
of the bottom of the monitor’s base (only use with base)
C. Make sure all cables are already connected to the monitor.
D. Follow the directions included with the wall mount to mount the monitor
to the wall.
INACTIVE
● Unplug the monitor when unused for long periods of time.
VENTILATION
● Never cover or block the ventilation slits in the monitor. Ventilation slits
are provided to prevent the temperature from rising. A minimum distance
of at least 10 cm should be maintained around the unit for sufficient
ventilation.
● Never insert any foreign object, metal or liquid into the ventilation slits, as
this could result in fire or electric shock.
● Do not install the DVR or other equipment too close to the monitor.
Keep equipment at least 30 cm away from the monitor.
WATER AND MOISTURE
● The monitor should not be exposed to dripping or splashing. No
objects filled with liquids should be placed on the monitor.
● Do not use the monitor near water.
● Do not touch the monitor or cable with wet hands as this may cause
electric shock or damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
5
6
1. Rear interface
2. Connection under various signal input mode
（Ⅰ）Connecting with PC, DVR at VGA
This connection allows you to connect to a PC or DVR. Connect one end
of a 15-pin monitor cable to the VGA VIDEO jack on the monitor and the
other end to the PC or the DVR's video output jack. Note, if your PC's
video output isn't 15-pin, you'll need an adapter that can connect to a 15-
pin monitor cable.
Connect your audio cable.
Explanation of connectors
Connect a 3.5 mm stereo mini pin cable (sometimes referred to as 1/8"
stereo mini pin) to the PC AUDIO jack on the back of the monitor and the
other end to the Audio Output jack on the PC or DVR.
Viewing the PC or DVR
1. Plug in the monitor and the PC, if they aren't already plugged in.
2. Turn on the monitor and the PC.
3. Repeatedly press the SOURCE button to switch the display channel
until you see VGA displayed at the top of the monitor's screen. To go
back to viewing AV video, press the SOURCE button to enter AV mode.
This section describes the jacks on the back panel of your monitor. There
are several ways to connect devices.
DC12V: Use only the power supply included with the monitor
DVI: Connect with detachable DVI cable
Remark: DVI cable is for Dual mode use only.
VGA: Connect your computer, or other device with a VGA output, to this
jack using a 15 pin D-sub cable.
PC AUDIO IN: (Stereo mini jack) Use to obtain sound when a PC is
connected to the VGA jack. Use a 3.5 mm stereo mini pin cable
(sometimes referred to as 1/8” stereo mini pin) to connect a PC to your
monitor.
VIDEO INPUT (AV1/AV2 IN): Lets you connect a device that has
composite video jacks, such as a DVR or Camera
VIDEO OUTPUT (AV OUT): Composite video loop though (to another
monitor or recorder)
（Ⅱ）Connecting the Device with Video
This connection allows you to connect a device that has a Video Output,
like, a camera or DVR etc.
Note: If the device you're connecting also has Component Video jack and
you have component video cables, we recommend you use the
Component Video (Advanced) Connection instead.
Connect your video cable (BNC).
Connect a video cable to the BNC INPUT jack on the back of the monitor.
Connect your red and white audio cables.
AUDIO L and R: AV audio interface. The left audio connector is usually
white. The right audio connector is usually red.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the audio (red and white) cables to the AUDIO INPUT R and L
jacks on the back of the monitor and to the Audio Output jacks on the
DVR.
3. Make sure the video image is centered within the screen area. Use the
monitor controls to adjust the image, if necessary. Perform an Auto
Configuration first, then if you wish you can adjust the horizontal and
vertical position, contrast, and brightness to better suit your video card
and your personal preferences. Refer to Basic OSD setup for more
information on using the on-screen menu to adjust the video display.
Controls
7
8
Viewing the Picture From the Connected Device
1. Plug in the monitor and the device if they aren't already plugged in.
2. Turn on the monitor and the device you want to view, for example a
camera.
Front Controls
(a) 5 Key Series
3. Repeatedly press the SOURCE button until you see AV displayed at
the top of the monitor's screen.
Note: If the picture from the DVR is blue and your device is connected to
the VIDEO Input, you might be tuned to the wrong input. Make sure you
press Source until you see AV displayed at the top of the monitor's screen.
SOURCE MENU
-
+
POWER
1. POWER: Turn the monitor on or off.
2. SOURCE: Press this button to switch between input modes AV, DVI ,
and VGA. On-screen OSD mode, press this button (move up or down)
to select a sub menu.
3. Connecting the Monitor Cables to your Computer
Make sure all cable connections are fastened -- tighten all cable screws.
Shaking and vibration may dislodge cables that are improperly connected.
Route all wiring and cabling away from heat sources and sharp metal
edges to avoid damage.
3. MENU：Press to view the On-screen OSD of the unit. Sub-menus,
features, and settings differ according to input mode on the on-screen
display, press this button to exit from main menu, sub-menus, features
and settings.
4. Testing the Monitor
4. ＋ and －: Press ＋ button to Increase or － button to decrease volume
After connecting, turn on the power switch located at the rear (or side) of
the bezel. Before you test your monitor, make sure all cables are
connected properly and routed through the cable management system. Be
sure to tighten all cable screws. To test that the monitor is working properly:
1. Turn on your pc or DVR.
from 1-100，on-screen OSD , press ＋ or －to adjust the settings.
5. Remote indicator: red when standby mode and blue when on display.
2. Make sure the video image is displayed. If it is not, turn on your monitor.
Ensure the LED indicator is blue – red indicates power but no signal.
(b)、Choose the input source
Download from Www.Somanuals.com. All Manuals Search And Download.
I
MenuSetup
PICTURE
none or no signal will appear on the screen. Press the source button on the
monitor or remote control and the menu will appear on the screen. Then
press source to select the monitor item and press“ +/- ” to save it.
VGA: The input source from VGA terminal output.
CONTRAST: Adjusts the difference
between the light and dark areas of the
picture. (Adjustment range:0-100)
DVI: The input source from DVI terminal output.
BRIGHTNESS: Adjusts the brightness of
AV: The input source from AV or video camera terminal output.
the picture. (Adjustment range:0-100)
COLOR TEMP: Press + or － button to
go into the Color Temp sub menu. Press
the “+” button to change the color intensity
of the temperature selected (Normal,
Warm, Cool, S-RGB, User)
9
Color temp.
BASIC ON-SCREEN DISPLAY SETUP
(1) Press the MENU button to see the menu.
USER : USER-R: 0~255
USER-G: 0~255
(2) Press ＋ or － to select the menu item and press SOURCE button to
select the Sub menu.
USER-B: 0~255
.
(3) Press ＋ or － to adjust the settings.
(4) Press the MENU button to return to the previous menu.
1. VGA Input Mode
10
Download from Www.Somanuals.com. All Manuals Search And Download.
BASS: Adjustment range:0-100
TREBLE: Adjustment range:0-100
BALANCE: Adjusts how much audio is
sent to the left and right (-50 to +50).
The intermediate value is 0. When
indication value of balance increases
toward +50, the volume of the right and
left speaker increase and decrease. When
the indication value of balance decreases
toward -50 the volume of the right and left
speaker increase and decrease.
SLEEP-TIMER: Adjusts the amount of
time until the screen goes to sleep. (OFF,
15min, 30min, 45min, 60min)
FUNCTION
AUDIO
DLC: ON / OFF
NOISE REDUCTION:
Function unavailable
SOUND MODE: Provides special
processing through your speakers
(depending on the setting you chose as
your Sound Type). The available audio
modes are: Standard, User, Movie, Music)
AVC (Automatic Volume Control) ON & OFF
HSTART、HSIZE、VSTART、VSIZE：
Function unavailable
H-POSITION：Moves the image on
screen either left (－) or right (＋).
V-POSITION：Moves the image on
screen either up (＋) or down (－).
CLOCK：If the clock is not fine-tuned, you
may observe periodic vertical bars of
video noise on your image. These bars of
noise are usually adjusted out when an
Auto Configuration is performed. If the
bars of noise are still present, this setting
can be adjusted manually.
LANGUAGE: Lets you select your
preferred language for the menus:
(English, Chinese, German, French,
Spanish, Italian, Portuguese, and
Russian)
H-POSITION: Adjust the OSD image
horizontally by pressing the + or – buttons.
V-POSITION: Adjust the OSD image
GEOETRY
OSD
vertically by pressing the ＋ or － buttons.
DURATION:5-60
HALFTONE:0-100
PHASE：Adjusts the signal phase to
BACKLIGHT: HIGH MID LOW
improve sharpness when the image is
fuzzy.
AUTO ADJUST: Performs automatic
configuration of the Phase, Clock, vertical,
and horizontal position settings.
MEMORY RECALL: Pressing the + or －
buttons will be reset all settings to the
factory default settings.
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE: Lets you select your
preferred language for the menus:
(English, Chinese, German, French,
Spanish, Italian, Portuguese, or Russian)
OSD H-POSITION: Adjust the OSD image
horizontally by pressing the + or – buttons.
OSD V-POSITION: Adjust the OSD image
vertically by pressing the + or – buttons.
DURATION: 5-60
2. AV Input Mode
PICTURE
BRIGHTNESS: Adjusts the brightness of
the picture.
CONTRAST: Adjusts the difference
between the light and dark areas of the
picture.
HUE: -50 to +50 (only available on AV
PAL)
SATURATION: 0-100
OSD
HALFTONE: 0-100
BACKLIGHT: HIGH MID LOW
SHARPNESS: 0-100
MEM-RECALL: Pressing the + key will be
reset all settings to the factory default
settings.
COLOR TEMP: Press the “+” button to
change the color intensity of the
temperature selected (Normal, Warm,
Cool, S-RGB, User)
SCALE: Full, Normal, or Center
PICTURE MODE: User, Standard, Soft, or
Vivid
BASS- Adjustment range:0-100
TREBLE- Adjustment range:0-100
BALANCE- Adjusts how much audio is
sent to the left and right (-50 to +50).
The intermediate value is 0. When
indication value of balance increases
toward +50, the volume of the right and left
speaker increase and decrease. When the
indication value of balance decreases
toward -50 the volume of the right and left
speaker increase and decrease.
SOUND MODE: Provides special
processing through your speakers
(depending on the setting you chose as
your Sound Type). The available audio
modes are: User. Standard, Movie, and
Music.
SLEEP-TIMER: Lets you set the monitor
to turn off after a given amount of time
(OFF, 15min, 30min, 45min, 60min)
FUNCTION
AUDIO
DLC: ON / OFF
NOISE REDUCTION：（OFF、 LOW 、
HIGH）
HSTART、HSIZE、VSTART、VSIZE：
Only available under AV Mode.
Adjust the OSD image horizontally or
vertically by pressing the “-“/ “+” button.
AVC (Automatic Volume Control)
ON & OFF
14
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3. DVI Input mode
PICTURE
LANGUAGE: Lets you select your
preferred language for the menus:
(English, Chinese, German, French,
Italian, Spanish, Portuguese, or Russian)
CONTRAST: Adjusts the difference
between the light and dark areas of the
picture.
BRIGHTNESS: Adjusts the brightness of
the picture.
OSD
H-POSITION: Adjust the OSD image
horizontally by pressing the + or – buttons.
COLOR TEMP: Press + or － button to
go into the Color Temp sub menu. Press
the “+” button to change the color intensity
of the temperature selected (Normal,
Warm, Cool, S-RGB, User)
USER:
V-POSITION: Adjust the OSD image
vertically by pressing the + or – buttons.
DURATION: 5-60
USER-R : 0~255
USER-G : 0~255
HALFTONE: 0-100
USER-B : 0~255
BACKLIGHT: HIGH MID LOW
BASS- Adjustment range:0-100
TREBLE- Adjustment range:0-100
BALANCE- Adjusts how much audio is
sent to the left and right (-50 to +50).
The intermediate value is 0. When
indication value of balance increases
toward +50, the volume of the right and
left speaker increase and decrease. When
the indication value of balance decreases
toward -50 the volume of the right and left
speaker increase and decrease.
SOUND MODE: Provides special
processing through your speakers
(depending on the setting you chose as
your Sound Type). The available audio
modes are: User, Standard, Movie, and
Music.
MEM-RECALL: Pressing the + or – key
will reset all settings back to the factory
default settings.
AUDIO
SLEEP-TIMER: Lets you set the monitor
to turn off after a given amount of time
(OFF, 15min, 30min, 45min, 60min)
FUNCTION
DLC: ON / OFF
NOISE REDUCTION:
Function unavailable
HSTART、HSIZE、VSTART、VSIZE:
Function unavailable
AVC (Automatic Volume Control) ON &
OFF
16
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model
VM15LCD VM17LCD VM19LCD
Model
VM15LCD VM17LCD
VM19LCD
Audio Inputs
Auto Adjustment
Wall Hanging
VESA Size
Stand
Stereo PC / Audio R and L
Size
15 inch
17 inch
19 inch
Yes
VESA Standard
100 x 100 mm
Aspect Ratio
4:3
Resolution (H x V) 1024 x 768
1280 x 1024
Yes (Plastic)
Colors
16.7M
Bezel
Plastic
English, Spanish, French, German,
Portuguese, Russian, Italian, and Simplified
Chinese
Viewing Angle
Viewing Lines
Contrast Ratio
H: 170º V: 160º
500 TV Lines
OSD Language
Power
20W
30W
40W
800:1
6ms
Consumption
Power Supply
OSD Control
Response Time
3D Comb Filter
with De-interlace
3D Noise
Reduction
Brightness
DC12V / 4A
Yes
Power Cord, Adapter, User’s Guide, and
2D
3D
Accessories
Audio Cable
Packaging (mm3)
(L x D x W)
410 x 142 x 410 450 x 150 x 450 480 x 165 x 500
270 cd/m2
Packaging (inch3)
(L x D x W)
16 1/8 x 5 5/8 x
16 1/8
17 3/4 x 6 x
17 3/4
18 7/8 x 6 1/2 x
19 11/16
Speakers
2 each (2.5 watts)
Composite
Inputs / Outputs
VGA
3.3 Kg
7.3 lb
4.9 Kg
10.8 lb
5.5 Kg
12.1 lb
BNC x 1 / BNC x 1
Weight (Kg / lb)
Operating Temp
Safety
32o F - 122o F
VGA x 1
DVI x 1
DVI
Energy Star, FCC-DOC, CE, RoHS
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
|