SpeakerCraft Speaker 10 User Manual

OWNER’S MANUAL  
Cinema In-Wall Sub  
In-Wall Subwoofer  
|
|
Cinema Sub 12 Cinema Sub 10 Cinema Sub 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Congratulations on your purchase of the Cinema Sub In-Wall Subwoofer! The Cinema Sub will provide the excellent per-  
formance and reliability that SpeakerCraft products have been recognized for. The Cinema Sub delivers the room-filling,  
thundering bass demanded by today’s home theater systems, while remaining completely recessed in the wall behind a  
flush mounted grille. The performance of high power, floor standing subwoofers has finally come to architectural speakers.  
SpeakerCraft is the name you can trust for accurate sound reproduction.  
SYSTEM COMPONENTS  
Included in this Carton:  
• Cinema Sub Subwoofer  
• Grille  
• Paint Mask  
• Cut Out Template  
INSTALLATION OPTIONS  
• For new construction applications, we highly recommend using the AccuTune box. For installation, follow the direc-  
tions included with the unit.  
• For retrofit installation, simply cut out the drywall using the template included. Then mount the woofer assembly into the  
cutout hole. AcoustaCell is also available and is recommended for retrofit installations.  
SYSTEM DESIGN CONSIDERATIONS  
In new construction, we highly recommend using the Accutune box that matches your subwoofer. It has been designed  
to acoustically compliment the subwoofer and eliminate the acoustic problems caused by drywall, by providing a solid  
enclosure to which the subwoofer will be attached. Please contact your authorized SpeakerCraft dealer for further infor-  
mation.  
The Subwoofer should be mounted low on the wall, free from obstructions. The lower you mount it, the louder the bass will  
be.  
For retrofit applications every practical effort should be made to eliminate possible noise on or inside the wall surrounding  
this subwoofer. Steps must be taken to ensure that the wall and anything attached to the wall, in which the Cinema Sub is  
mounted, is secure. We recommend not hanging anything directly over the Cinema Sub. If there is no way around it, steps  
will need to be taken to ensure that pictures, mirrors, shelves, etc. do not vibrate on the wall. The use of rubber grommets,  
adhesive tape, extra mounting screws, or foam padding will help in these types of applications.  
In addition to our AcoustaCell system (part # ASMX3101) we recommend using acoustical spray foam instead of insulation  
in the bays that surround the Cinema Sub. The foam will be able to get into all those small gaps and will absorb most of the  
vibration from the subwoofer. If foam is not available, stuff the wall with as much insulation as possible. Using adhesive foam  
strips between the stud and drywall is also an option that could be used to help keep the drywall from vibrating on the studs.  
In addition, extra drywall screws can be used to secure the drywall to the studs.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIAGRAM 1  
Installation Overview  
STEP 1  
Cut opening  
STEP 2  
Connect wires  
STEP 4  
Insert Grille  
STEP 3  
Mount Speaker  
Please use Diagram 1 for a quick installation overview, which will be explored in greater detail throughout this manual.  
CAUTION  
• The Cinema Sub is designed to work only with the Bass Power amplifier. To insure maximum sound quality and  
performance, use this amplifier only.  
• Be sure there is enough clearance for the mounting feet.  
• Please follow the instructions below carefully. For technical inquires, please call 1-800-448-0976 or e-mail us at  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
1a.  
Cinema Sub Installation – New Construction  
Mounting the Cinema Sub subwoofer requires that you first run speaker wire (minimum 14 gauge) to the Bass Power  
amplifier’s location. For greatest flexibility of connection, use four conductor, 14 gauge wiring. After pulling the speaker  
wire from the Bass Power amplifier location, you can now hang the drywall. Carefully mark and cut out the hole for the  
subwoofer before mounting the drywall.  
NOTE: It is critical to insure that the drywall (or any wall material) is well dampened and tight to avoid vibrations.  
1b.  
Cinema Sub Installation – Retrofit  
Find the location of the studs in the wall by using a good stud finder. Locate the exact center between the studs by  
drilling a small hole as close to the center as can be determined, then, using a stiff wire (a metal coat hanger works  
well) bent to 90º, feel for both studs through the hole. By turning the wire around you should be able to determine the  
exact center between the studs.  
Once the center has been determined, use the cut-out template supplied with the subwoofer to mark and cut out the  
hole in the drywall, being sure that it is level.  
2.  
Connect Wiring:  
Make sure that the amplifier's power is unplugged when connecting any wires or cables to it. In a mono bass amplifier,  
connect the speaker wire to the woofer, using the pair of terminals that has the white dot on the support piece (see  
Diagram 2). Be sure to connect the positive wire to the red terminal (+) and the negative wire to the black terminal (-).  
NOTE: Make sure the connections are tight or they may rattle. The other end of the wire should be connected to the  
“SUB OUT” terminals on the Bass Power amplifier in the same manner.  
In the case that a stereo bass amplifier is used, four conductor 14 gauge wire should be used to connect to both pairs  
of terminals on the subwoofer.  
3. Mounting the Cinema Sub  
The Cinema Sub has been specifically designed to mount to the drywall. Make sure the mounting feet are turned  
inward to clear the opening, and insert the subwoofer into the cut-out. Position the speaker in the hole. NOTE: The flange  
of the speaker is designed to flex and conform to any small imperfections in the wall surface. Tighten the 8 screws on the  
front of the baffle enough to make the flange become snug against the drywall. As you tighten the screws, the feet will  
automatically flip into an outward position (see Diagram 3), clamping the drywall between the feet and the flange.  
CAUTION: Over tightening may warp the baffle, crack the drywall, cause the flange to distort, and make the grille dif-  
ficult to install.  
4.  
Inserting the Grille  
Once the Cinema Sub is in place, you can carefully push the grille into the slot on the baffle. Due to the nature of the  
system, the grill is designed to fit very tightly.  
DIAGRAM 3  
DIAGRAM 2  
Terminals  
Support Piece  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Cinema Sub 12  
Cinema Sub 10  
12" Long Throw Woofer, Treated Paper  
Cone with Butyl Rubber Surround  
10" Long Throw Woofer, Treated  
PaperCone with Butyl Rubber Surround  
Driver:  
4 ohms / per coil  
4 ohms / per coil  
Impedance:  
91 dB  
89 dB  
SPL:  
25Hz - 500Hz  
30Hz - 800Hz  
Frequency Response:  
Power Handling:  
Baffle & Grille Color:  
Dimensions H x W:  
250 watts (use the Bass Power 250 amp)  
White  
200 watts (use the Bass Power 200 amp)  
White  
141516" x 141516"  
(380mm x 380mm)  
13916" x 13916"  
(345mm x 345mm)  
1338" x 1338  
"
1218" x 1218  
"
Cut-Out Dimensions H x W:  
Weight:  
(340mm x 340mm)  
(308mm x 308mm)  
10 lbs.  
8 lbs.  
Cinema Sub 8  
Driver:  
8" Long Throw Woofer, Treated Paper  
Cone with Butyl Rubber Surround  
Impedance:  
4 ohms / per coil  
SPL:  
88 dB  
Frequency Response:  
Power Handling:  
Baffle & Grille Color:  
Dimensions H x W:  
35Hz - 1000Hz  
150 watts (use the Bass Power 150 amp)  
White  
1112" x 1112  
"
(292mm x 292mm)  
Cut-Out Dimensions H x W:  
Weight:  
10" x 10"  
(254mm x 254mm)  
6 lbs.  
In our attempt to constantly improve our products, features and specifications are subject to change without notice.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED LIFETIME WARRANTY  
SpeakerCraft Inc. warrants to the original retail purchaser only that the Cinema Sub Subwoofer will be free from defects in materials and  
workmanship, provided the speaker was purchased from a SpeakerCraft Authorized Dealer.  
Defective products must be shipped, together with proof of purchase, prepaid insured to the SpeakerCraft Authorized Dealer from whom  
they were purchased, or to the SpeakerCraft factory at the address listed on this installation instruction manual. Freight collect shipments will  
be refused. It is preferable to ship this product in the original shipping container to lessen the chance of transit damage. In any case, the risk  
or loss or damage in transit is to be borne by the purchaser. If, upon examination at the Factory or SpeakerCraft Authorized Dealer, it is deter-  
mined that the unit was defective in materials or workmanship at any time during this warranty period, SpeakerCraft or the SpeakerCraft  
Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. If this model is no  
longer available and can not be repaired effectively, SpeakerCraft, at its sole option, may replace the unit with a current model of equal  
or greater value. In some cases where a new model is substituted, a modification to the mounting surface may be required. If mounting  
surface modification is required, SpeakerCraft assumes no responsibility or liability for such modification. All replaced parts and product  
become the property of SpeakerCraft Inc. Products replaced or repaired under this warranty will be returned to the original retail purchaser,  
within a reasonable time, freight prepaid.  
This warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate pack-  
ing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, or service, repair or modification of  
the product which has not been authorized or approved by SpeakerCraft. This warranty also excludes normal cosmetic deterioration caused  
by environmental conditions. This warranty will be void if the serial number on the product has been removed, tampered with or defaced.  
This warranty is in lieu of all other expressed warranties. If the product is defective in materials or workmanship as warranted above, the purchas-  
er’s sole remedy shall be repair or replacement as provided above. In no event will SpeakerCraft be liable for any incidental or consequential  
damages arising out of the use or inability to use the product, even if SpeakerCraft Inc. or a SpeakerCraft Inc. Authorized  
Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not allow  
the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply.  
All implied warranties on the product are limited to the duration of this expressed warranty. Some states do not allow limi-  
tation on the length of an implied Warranty. If the original retail purchaser resides in such a state, this limitation does not  
apply.  
SpeakerCraft offers a variety of accessories to make your installation of this and other SpeakerCraft products easy, economical, and professional.  
Contact your authorized SpeakerCraft Dealer for more information. For technical inquires, please call 1-800-448-0976 or e-mail us at techsupport@  
speakercraft.com. We are available to assist you every weekday, except holidays, between the hours of 7:00 a.m. and 5:00 p.m. PST.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
940 Columbia Avenue, Riverside CA, 92507 | USA (800) 448 0976 Fax (951) 787 8747 International +1 951 787 0543 | www.speakercraft.com  
LIT67000  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Cash Register XE A20S User Manual
Sony Car Stereo System STR GX59ES User Manual
Sony Cassette Player XR C5080R User Manual
Sony eBook Reader PRS 300SC User Manual
Sony MP3 Player DPF D70 User Manual
Sony Speaker STR AV1000 User Manual
Sony Speaker System 369 User Manual
Speed Queen Washer AWM371W2 User Manual
Spirit Musical Instrument FOLIO SX mixer User Manual
Stiga Lawn Mower 11 3281 28 User Manual