Display System
Owners Manual
Customer Service Center
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
Model
89226
REQUIRED TOOLS AND MATERIALS:
WARNING!
• 2 Capable Adults
• (2 each) Wrenches and/or
Socket Wrenches and
Sockets.
READ AND UNDERSTAND
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.
• 2 Stepladders
7/16"
1/2"
9/16"
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO PROPERTY.
AND/OR
• Phillips Screwdriver
7/16"
1/2"
9/16"
IMPORTANT!
To ensure prompt and correct handling of any problems, or to answer any questions, please
contact the Sample and Display Technician at 1-800-558-5234.
© COPYRIGHT 2006 by SPALDING
09/06
ID# M890001
1
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST (See Hardware Identifier)
Item Qty. Part No. Description
Item Qty. Part No. Description
1
2
2
1
200318 Bracket, Reinforcement S/J
200503 P/S Cover
17
18
2
2
203795 Nut, 3/8-16 Special S/J
203796 T-bolt, 3/8-16 x 5"
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2
2
3
3
12
1
12
1
12
2
6
200520 Screw, #8 x 3/4", Flat Head, Phillips
200533 Spacer, Mounting
990062 Pole, 3.5"
201344 Plastic Knob
201611 Bolt,Hex-Flange, 5/16-18 x 3"
202795 NBA Sticker
203063 Lock Nut, 3/8-16 Nylon Insert
203157 Bolt, Carriage, 5/16-18 x 2.25"
203100 Nut, Hex-Flange 5/16-18 Whiz Lock
203231 Bolt, Carriage, 5/16-18 x 3.5"
203294 Bolt, U, Round, 3/8-16 x 3.5"
203309 Washer
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
1
4
1
3
2
1
4
1
1
1
1
1
3
1
1
203798 Bolt, Hex 5/16-18 x 1.5"
204290 Net
206219 Pole Cap, 3"
207103 Pole Cap, 3.5"
900033 Bracket, S/J
900060 Pole, 3"
Rim
900253 Bracket, Pole Mount, No Tools
206987 Wedge
909256FR Board, 48", Fan, Viper
90925901 Board, 44", Fan, Evolution, NT
909602FR Board, 44", Fan, Zone Attack
912006 Extension Arm
4
2
2
203470 Washer, Flat, S/J
203472 Spring
979235FR Board, 48", SFA, Titanium II
902319 Bracket, Reinforcement, No Tools
HARDWARE IDENTIFIER (Bolts and Screws)
Item #3 (2)
Item #7 (12)
Item #19 (1)
Item #10 (1)
Item #12 (2)
Item #18 (2)
HARDWARE IDENTIFIER (Nuts, Washers & Springs)
Item #11 (12)
Item #9 (12)
Item #17 (2)
Item #14 (4)
Item #16 (2)
Item #15 (2)
09/06
ID# M890001
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Install display boards in the marked locations. Each mounting location consists of a mounting pole stub with
the following dimensions: Height = 8”, O.D. = 3 3/8”, I.D. = 3 1/8” (arrows indicate direction the board is
facing).
Display Stand - Top View
3-1/2"
3"
Corner “4”
80602
Corner “3”
61259
Corner “2”
73256
Corner “1”
9H235A
3-1/2"
3-1/2"
Display boards will be mounted as follows:
Corner Location 1: 9H235A
• 48” SFA Board
• Titanium II Logo
• Black Slam Jam Goal with Cover
• Use extension arm for assembly
Corner Location 2: 73256
• 48” Fan Recycled Board
• Viper Logo
• Black Slam Jam Goal
• Use extension arm for assembly
Corner Location 3: 61259
• 44” Fan Recycled Board
• Evolution Logo
• Black Standard Goal
• No Tools, E3 Elevator System
Corner Location 4: 80602
• 44” Fan Recycled Board
• Zone Attack Logo
• Black Standard Goal
• Use extension arm for assembly
ID# M890001
09/06
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Slide the 3" diameter end of the display pole (24)
inside the pole sleeve.
1.
Secure the display pole by sliding the display
wedge (27) into position as shown. To lock the
display pole in place, tighten the hex-bolt (19).
24
24
27
19
At corner location 1, 2 and 4 slide
the 3-1/2" diameter end of the
display pole (5) outside the mounting
stubs.
2.
5
09/06
ID# M890001
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Corner Location 1: STEEL FRAME ACRYLIC BACKBOARD ASSEMBLY
Display Stand - Top View
31
11
11
3-1/2"
3"
Corner “4”
80602
Corner “3”
61259
32
4
Corner “2”
73256
Corner “1”
9H235A
4
3-1/2"
3-1/2"
18
Insert “T” bolt (18) through Slam Jam bracket (23) as shown.
Secure Slam Jam bracket (23), extension arm (31) and
mounting spacers (4) assemblies to backboard using bolt (7 )
and nut (11) as shown.
1.
2.
23
7
Attach board assembly to pole.
32
WARNING!
TWO CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY
AND/OR PROPERTY DAMAGE.
22
9
9
9
13
ID# M890001
09/06
6
Download from Www.Somanuals.com. All Manuals Search And Download.
• Fit rim (25) securely into bracket (23) as shown.
NOTE:
Tighten nut (17) until flush
with end of "T" bolt (18) as
shown here.
3.
• Install reinforcement bracket (1) onto “T” bolt (18) as shown.
• Install spring (16) onto “T” bolt (18) as shown.
• Install special nut (17) and washer (15) onto “T” bolt (18).
25
17
18
NOTE:
15
Peel protective
23
film from surface
16
of acrylic
backboard prior to
use.
1
Apply logo label (8) to rim cover (2).
Attach cover (2) to rim using
screws (3).
4.
5.
3
25
2
2
8
09/06
ID# M890001
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Corner Location 2: 48” FAN MOLDED PLASTIC BOARD ASSEMBLY
11
Display Stand - Top View
31
3-1/2"
3"
Corner “4”
80602
Corner “3”
61259
28
Corner “2”
73256
Corner “1”
9H235A
3-1/2"
3-1/2"
Insert “T” bolt (18) through Slam Jam bracket
(23) as shown.
Secure Slam Jam bracket (23) and extension
arm (31) to backboard using bolt (7) and nut
(11) as shown.
1.
2.
18
23
18
Tighten completely.
7
7
Attach board assembly to pole.
28
WARNING!
TWO CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY
AND/OR PROPERTY DAMAGE.
22
9
9
9
13
ID# M890001
09/06
8
Download from Www.Somanuals.com. All Manuals Search And Download.
• Fit rim (25) securely into bracket (23) as shown.
3.
• Install reinforcement bracket (1) onto “T” bolt (18) as shown.
• Install spring (16) onto “T” bolt (18) as shown.
• Install special nut (17) and washer (15) onto “T” bolt (18).
NOTE:
Tighten nut (17) until
flush with end of
"T" bolt (18) as
shown here.
25
17
18
15
1
16
23
09/06
ID# M890001
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Corner Location 3: 44" FAN MOLDED PLASTIC BOARD ASSEMBLY
Pole bracket will need to be lightly pressed into
1.
Display Stand - Top View
backboard ribbing. Be sure to press completely into
place. Attach rim (25) to backboard and pole bracket
(26) with knob (6), reinforcement bracket (1), and
carriage bolt (10) as shown. Tighten knob
completely.
3-1/2"
3"
Corner “4”
80602
Corner “3”
61259
WARNING!
KNOB MUST BE TIGHTENED
COMPLETELY AND CHECKED
FOR TIGHTNESS BEFORE
EACH USE.
29
Corner “2”
73256
Corner “1”
9H235A
6
33
3-1/2"
3-1/2"
25
NOTE:
BOARD STYLE
MAY VARY.
26
PRESS BRACKET (26)
INTO PLACE HERE
10
Attach board assembly to pole with carriage
bolts (12) and knobs (6) as shown. Install pole
cap (21) as shown.
2.
21
6
6
12
24
ID# M890001
09/06
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Corner Location 4: 44" FAN MOLDED PLASTIC BOARD ASSEMBLY
Display Stand - Top View
11
11
31
3-1/2"
3"
Corner “4”
80602
Corner “3”
61259
30
Corner “2”
73256
Corner “1”
9H235A
3-1/2"
3-1/2"
Attach rim (25) to backboard (30) and
extension arm (31) with bolts (7), washers (14)
and nuts (11).
1.
2.
14
25
14
Tighten completely.
7
Attach board assembly to pole.
30
WARNING!
TWO CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY
AND/OR PROPERTY DAMAGE.
22
9
13
9
09/06
ID# M890001
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|