Display System
Owners Manual
Customer Service Center
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
Model
89226CA
REQUIRED TOOLS AND MATERIALS:
WARNING!
• 2 Capable Adults
• (2 each) Wrenches and/or
Socket Wrenches and
Sockets.
READ AND UNDERSTAND
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.
• 2 Stepladders
7/16"
1/2"
9/16"
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO PROPERTY.
AND/OR
• Phillips Screwdriver
7/16"
1/2"
9/16"
IMPORTANT!
To ensure prompt and correct handling of any problems, or to answer any questions, please
contact the Sample and Display Technician at 1-800-558-5234.
© COPYRIGHT 2006 by SPALDING
11/06
ID# M890021
1
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST (See Hardware Identifier)
Item Qty. Part No. Description
Item Qty. Part No. Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
2
2
2
2
2
1
8
4
8
2
10
3
4
4
200318 Bracket, Reinforcement S/J
203223 Bolt, Carriage, 5/16-18 x 1"
908379 Board Bracket
200533 Spacer, Mounting
990062 Pole, 3.5"
15
16
17
18
19
20
21
22
23
24
25
26
27
2
2
2
2
3
3
2
2
2
1
1
1
1
203470 Washer, Flat, S/J
203472 Spring
203795 Nut, 3/8-16 Special S/J
203796 T-bolt, 3/8-16 x 5"
203798 Bolt, Hex 5/16-18 x 1.5"
204290 Net
908378 Rim
201611 Bolt,Hex-Flange, 5/16-18 x 3"
205544 Bolt, 5/16-18 x 1.25"
203063 Lock Nut, 3/8-16 Nylon Insert
912006 Extension Arm
203100 Nut, Hex-Flange 5/16-18 Whiz Lock
206987 Wedge
Rim
207103 Pole Cap, 3.5"
900033 Bracket, S/J
FR908359 Pole, 2.75"
909271FR Board, 44" Rectangular, Ball on Court
919246FR Board, 44", Traditional NBA, Brown
979281FR Board, 50" Polycarbonate, Blue
203294 Bolt, U, Round, 3/8-16 x 3.5"
203309 Washer
HARDWARE IDENTIFIER (Bolts and Screws)
Item #7 (8)
Item #19 (3)
Item #2 (2)
Item #8 (4)
Item #18 (2)
HARDWARE IDENTIFIER (Nuts, Washers & Springs)
Item #11 (10)
Item #9 (8)
Item #17 (2)
Item #14 (4)
Item #16 (2)
Item #15 (2)
11/06
ID# M890021
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Install display boards in the marked locations. Each mounting location consists of a mounting pole stub with
the following dimensions: Height = 8”, O.D. = 3 3/8”, I.D. = 3 1/8” (arrows indicate direction the board is
facing).
4
3
3"
3-1/2"
65246CA
Open - No Board
77271CA
3-1/2"
66281CA
3-1/2"
1
2
Display boards will be mounted as follows:
Corner Location 1: 66281CA
• 50” Polycarbonate Backboard
• Blue Graphic
• Black Slam Jam Rim
• Use extension arm for assembly
Corner Location 2: 77271CA
• 44” Rectangle Recycled Board
• Basketball on Court Graphic
• Black Slam Jam Goal
• Use extension arm for assembly
Corner Location 3: 65246CA
• 44” Trapezoidal Recycled Board
• Evolution Logo
• Black Standard Goal
• Gooseneck Pole System
Corner Location 4: Open - No Board
ID# M890021
11/06
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Corner Location 1 & 2: POLE PLACEMENT
At corner locations 1 and 2 slide the 3-1/2" diameter end of the
1. display pole (5) outside the mounting stubs.
4
3
5
1
2
Corner Location 3: POLE PLACEMENT
At corner location 3 slide the 2.75” diameter pole end of the
display pole (24) inside the moiunting stub.
2.
Secure the display pole by sliding the display wedges (12) into
position as shown. To lock the display pole in place, tighten
the hex-bolts (19).
24
24
4
1
3
19
12
12
19
19
12
2
11/06
ID# M890021
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Corner Location 1: STEEL FRAME ACRYLIC BACKBOARD ASSEMBLY
Display Stand - Top View
10
11
11
4
3
3"
3-1/2"
65246CA
Open - No Board
27
66281CA
3-1/2"
77271CA
3-1/2"
4
4
18
1
2
Insert “T” bolt (18) through Slam Jam bracket (23) as shown.
Secure Slam Jam bracket (23), extension arm (10) and
mounting spacers (4) assemblies to backboard using bolt (7 )
and nut (11) as shown.
1.
2.
23
7
Attach board assembly to pole.
27
WARNING!
TWO CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY
AND/OR PROPERTY DAMAGE.
22
9
9
9
13
ID# M890021
11/06
6
Download from Www.Somanuals.com. All Manuals Search And Download.
• Fit rim (21) securely into bracket (23) as shown.
NOTE:
Tighten nut (17) until flush
with end of "T" bolt (18) as
shown here.
3.
• Install reinforcement bracket (1) onto “T” bolt (18) as shown.
• Install spring (16) onto “T” bolt (18) as shown.
• Install special nut (17) and washer (15) onto “T” bolt (18).
21
17
18
NOTE:
15
Peel protective
23
film from surface
16
of acrylic
backboard prior to
use.
1
Install net (20) as shown.
4.
OUTSIDE VIEW
B.
A.
C.
D.
20
21
11/06
ID# M890021
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Corner Location 2: 48” SQUARE MOLDED PLASTIC BOARD ASSEMBLY
11
Display Stand - Top View
4
3
3"
3-1/2"
10
65246CA
Open - No Board
25
66281CA
3-1/2"
77271CA
3-1/2"
1
2
Insert “T” bolt (18) through Slam Jam bracket
(23) as shown.
Secure Slam Jam bracket (23) and extension
arm (10) to backboard using bolt (7) and nut
(11) as shown.
1.
2.
18
23
18
Tighten completely.
7
7
Attach board assembly to pole.
25
WARNING!
TWO CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY
AND/OR PROPERTY DAMAGE.
22
9
9
9
13
ID# M890021
11/06
8
Download from Www.Somanuals.com. All Manuals Search And Download.
• Fit rim (21) securely into bracket (23) as shown.
3.
• Install reinforcement bracket (1) onto “T” bolt (18) as shown.
• Install spring (16) onto “T” bolt (18) as shown.
• Install special nut (17) and washer (15) onto “T” bolt (18).
NOTE:
Tighten nut (17) until
flush with end of
"T" bolt (18) as
shown here.
21
17
18
15
1
16
23
Install net (20) as shown.
4.
OUTSIDE VIEW
B.
A.
C.
D.
20
21
11/06
ID# M890021
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Corner Location 3: 44" TRAPEZOID MOLDED PLASTIC BOARD ASSEMBLY
Display Stand - Top View
4
3
3"
3-1/2"
65246CA
Open - No Board
66281CA
3-1/2"
77271CA
3-1/2"
1
2
Attach rim (6), backboard (26) and support brackets (3) to the mounting pad on the top pole using the
bottom rim mounting bolts (8) as shown.
1.
26
3
3
6
8
8
ID# M890021
11/06
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Install support bracket mounting bolts (21) as shown.
Install the top rim mounting bolts (8) as shown.
2.
3.
26
26
2
11
2
11
6
6
8
Install net (20) as shown.
4.
OUTSIDE VIEW
B.
A.
D.
C.
20
21
11/06
ID# M890021
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|