Manual
Model 9629
Dual-channel De-Esser
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Foreword ............................................................................................................................. 3
Thanks .................................................................................................................................. 3
Introduction ...................................................................................................................... 4
Installation & Security Advices ..................................................................................... 4
Connections ...................................................................................................................... 5
Control Elements
S-Reduction ....................................................................................................................... 6
Auto Threshold ................................................................................................................. 6
Male/Female ...................................................................................................................... 7
Active ................................................................................................................................... 7
Power Supply .................................................................................................................... 7
Specifications .................................................................................................................... 8
Warranty .............................................................................................................................. 9
Notes ....................................................................................................................................10
Foreword
Dear customer,
congratulations on purchasing the SPL Auto Dynamic De-Esser. You have
decided to use a high performance tool which sets you in the position to
have faster success and a better sound quality in your music productions.
As a typical SPL unit the Auto Dynamic De-Esser combines exemplary
specifications and high manufacturing standard with excellent sound
quality to provide you a precious component for studio and P.A. purposes.
Please read this manual carefully to ensure you have all the information you
need to use the Auto Dynamic De-Esser.
We wish you every success with the Auto Dynamic De-Esser.
Your Sound Performance Lab Team
Thanks
I would like to start with my thanks to all our staff who created what is to be
described here.The importance of their exceptional qualification and talents
can´t be overestimated. But the biggest thanks I owe their unbelievable
engagement, creativity and productivity in realizing our projects.
Our products are often tested and compared in many publications and by
our customers themselfs and constantly valued with best results.
I would like to pass on this broad appreciation to those, who deserve it –
my excellent colleagues.
Hermann Gier
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The Auto-Dynamic De-Esser is a highly specialized audio tool. It is used to
reduce S-frequency of speakers and singers. It should perform without
disturbing natural character and timbre of the voice.This is not an easy task.
SPL has developed a new circuit design that combines ease of use with
natural sounding and effective performance.
How do traditional De-Essers work?
Traditional De-Essers use compressor-technology. The control elements are
a threshold control and a frequency control. The threshold sets the level at
which de-essing starts and the frequency control sets the center frequency
of a frequency band that is usually up to 3-4 kHz wide. Any S-frequency
within that band causes the compressor to compress the entire frequency
band. As a result the voice speaks through the noise or lisps.
How does SPL’s Auto Dynamic De-Esser work?
The Auto Dynamic De-Esser utilizes a new circuit design that “scans” the
frequency spectrum and automatically hones in on S-frequencies. Only
these narrow-band frequencies are processed and adjacent frequencies are
left untouched. The Auto Dynamic De-Esser reduces S-frequencies by
feeding a phase inversed signal of the detected narrow band S-frequency
back into the signal path. The S-frequency is cancelled out. Therefore the
quality of De-Essing is significantly improved – the result is neutrality to the
sound and an unobtrusive but very effective mode of operation. There are
almost no negative side effects on the timbre and character of the voice,
even while using a high intensity of S-Reduction.
Installation & Security Advices
The housing of the Auto Dynamic DeEsser has the standard 19"-EIA format
and occupies 1U (44.45 mm) in your rack. When installing the unit in a 19"-
rack, the rear side of the unit needs some support, especially in a touring
case.
The Auto Dynamic DeEsser should not be installed directly above or below
power amplifiers or near units which produce strong magnetic fields or
extreme heat.
Check that the voltage details quoted on the back panel are the same as
your local mains electricity supply. Use a minus (-) screwdriver to set the
voltage selector to the appropriate value.
Never cover up the ventilation slots on the top of the unit. If, during opera-
tion, the sound is interrupted or indicators no longer illuminate, or if
abnormal odor or smoke is detected, or if liquids are spilled on the unit,
immediately disconnect the power cord plug and contact your dealer.
Only clean the Auto Dynamic DeEsser with a soft, lint-free cloth.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Switch off power of all units to be connected before you connect the Auto
Dynamic De-Esser.
The Auto Dynamic De-Esser is fitted with both XLR-connectors and TRS
stereo jacks for balanced operation, though the jacks may be used with
unbalanced connections simply by plugging in mono jack-plugs. The level
difference that normally occurs when a balanced input or output is used
unbalanced is automatically compensated for.
Should the need arise to use the XLR connectors in an unbalanced system,
pin 3 of the XLRs should be grounded. Inserting a mono jack also unbalances
the XLRs.
Both output stages operate in parallel, so it is possible to connect two diffe-
rent destination units simultaneously, for example to record to two different
media at the same time or split the output between a mixer and effects
processor. However, only one type of input (jack or XLR) should be
connected at a time – the Auto Dynamic De-Esser is not intended to be used
as a mixer!
To ensure optimal signal quality, SPL has developed a new hybrid-compo-
nent balanced input/output stage using all laser-trimmed resistors with a
tolerance of 0.01%. This approach has resulted in an exceptionally high
CCMR (common mode rejection): 100dB at 1kHz and 80dB at 10kHz. As a
precaution, before connecting the Auto Dynamic De-Esser switch off power
of the unit and of all units to be connected.
Rear panel
Balanced XLR and TRS stereo jack I/Os (+6 dB)
Voltage selector: 230 V/50 Hz or 115 V/60 Hz
GND Lift switch, CSA/UL approved 3-pole power plug
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Elements
1
2 3 4
S-Reduction controls the intensity of the de-essing effect. The LED-display
shows the gain reduction of S-frequencies in a range between 0dB to -20dB
in 2dB steps.
1
S-Reduction
S-REDUCTION adjustments between 3 and 7 have proven to create best
results in practical applications.
AUTO-THRESHOLD activates a new function that automatically readjusts the
threshold when the input gain varies due to varying distances of the speaker
to the microphone. The de-essing remains on a constant level when Auto
Threshold is activated (status-LED illuminated).
2
Auto-Threshold
Especially with untrained speakers or in live applications the distance to
the microphone sometimes varies dramatically. De-essers operating with
common compressor technology change their de-essing intensity with
varying input levels. As a de-esser should be used right after the microphone
preamplifier and in front of a compressor/limiter, common de-essers
produce negative side effects on the vocals such as speaking through the
nose or lisping.
The Auto Threshold function gets rid of all these problems. No matter how
much the input level varies, the de-essing is proportionally the same and a
following compressor/limiter works better and more efficient.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Elements
The Male/Female-switch lets you select two different operation modes: The
female mode is chosen when the switch is pressed and the status-LED illu-
minates. The automatic S-frequency recognition is set to the characteristics
of female voices. The opposite position of the button switches to the male
mode. The S-frequency recognition is then set to the characteristics of male
voices. However, it may sometimes be necessary to use the MALE mode and
female vocals and vice versa. The selection of this switch is largely depen-
ding on the character of the S-frequency.
3
Male/Female
The center frequency of the bandwidth where the Auto Dynamic De-Esser
looks for S-frequencies is located at 6 kHz for male voices and around 7 kHz
for female voices.
ACTIVE switches each channel in and out of processing. In order to minimize
switching noise and transients the circuitry is switched in and out after the
balancing stages.
4
Active
The POWER switch activates the relay-hard-bypass circuitry, which is also
activated when a power failure occurs on the primary or secondary side of
the power supply.
Power Supply
Special care has gone into the design of the power supply of the Auto
Dynamic De-Esser because the power supply is the heart of any electronic
system, and the better it is, the better the whole system works. In an audio
system, this translates into better sound quality, lower noise and lower
distortion.The power supply is based around a specifically produced 15VA
torroidal transformer and is designed to minimize induced hum and noise
due to the lack of an air-gap.
The primary voltage may be selected between 230 V/50 Hz and 115V/60Hz
by means of a recessed slide switch on the rear panel. A rear-panel ground-
lift switch is fitted for use where ground loops are causing hum problems.
When the GND Lift switch is pressed, the circuit ground is isolated from the
chassis ground.
The detachable power cord is a standard 3-wire type fitted with an IEC
mains connector; the transformer, power cord and mains connector have
VDE, UL and CSA approvals. The fuse has a value of 200mA/230 V and
400 mA/115 V for the primary voltage.
On the secondary side of the power supply, an RC combination is used to
filter out noise and hum voltages. Both half-waves are smoothed with 2 x
1000 µF capacitors in the positive and 2 x 1000 µF capacitors in the negative
voltage supply path, and both lines use precision voltage regulators for
optimum stability. Deviations of only a few millivolts can impair audio
quality, introducing artifacts such as loss of stereo imaging or a diffuse
sound character.
Particular care has gone into the circuit layout and component choice to
minimize crosstalk between the audio circuitry and control voltages.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Input & Output
Instrumentation amplifier, electronically balanced (differential),
transformerless
Nominal input level.......................................... +6 dB
Input impedance.............................................. = 22 kOhms
Output impedance .......................................... < 600 Ohms
Max. input level ................................................. +24 dBu
Max. output level .............................................. +22,4 dBu
Minimum load ohms ...................................... 600 Ohms
Hard Bypass Relay / Power Fail Safety
Measurements
Frequency response ....................................... 20 Hz - 50 kHz
(50 kHz = -3 dB)
CCMR (common mode rejection) .............. -80 dBu @1kHz
THD & N ............................................................... 0,002% @ 1kHz
S/N CCIR 468-3 .................................................. -93 dBu
S/N A-weightened
-106 dBu
Power Supply
Torroidal transformer ..................................... 15 VA
Fuse ....................................................................... 200 mA
Ground-Lift switch .......................................... yes
Voltage selector ................................................ yes
Dimensions
Housing ............................................................... Standard EIA 19"/1U
... 482 x 44 x 237 mm
Weight.................................................................. 3,4 kg
Note: 0 dBu = 0.775 V. Subject to change without notice.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
SPL electronics GmbH (hereafter called SPL) products are warranted only in
the country where purchased, through the authorized SPL distributor in that
country, against defects in material or workmanship. The specific period of
this limited warranty shall be that which is described to the original retail
purchaser by the authorized SPL dealer or distributor at the time of
purchase.
SPL does not, however, warrant its products against any and all defects:
1) arising out of materials or workmanship not provided or furnished by SPL,
or
2) resulting from abnormal use of the product or use in violation of instruc-
tions, or
3) in products repaired or serviced by other than authorized SPL repair facili-
ties, or
4) in products with removed or defaced serial numbers, or
5) in components or parts or products expressly warranted by another
manufacturer.
SPL agrees, through the applicable authorized distributor, to repair or
replace defects covered by this limited warranty with parts or products of
original or improved design, at its option in each respect, if the defective
product is shipped prior to the end of the warranty period to the designated
authorized SPL warranty repair facility in the country where purchased, or to
the SPL factory in Germany, in the original packaging or a replacement
supplied by SPL, with all transportation costs and full insurance paid each
way by the purchaser or owner.
All remedies and the measure of damages are limited to the above
services. It is possible that economic loss or injury to person or property may
result from the failure of the product; however, even if SPL has been advised
of this possibility, this limited warranty does not cover any such consequen-
tial or incidental damages. Some states or countries do not allow the limita-
tions or exclusion of incidental or consequential damages, so the above limi-
tation may not apply to you.
Any and all warranties, expressed or implied, arising by law, course of
dealing, course of performance, usage of trade, or otherwise, including but
not limited to implied warranties of merchantability and fitness for parti-
cular, are limited to a period of 1 (one) year from either the date of manufac-
ture. Some states or countries do not allow limitations on how long an
implied warranty lasts, so the above limitations may not apply to you.
This limited warranty gives you specific legal rights, and you may also have
other rights which vary from state to state, country to country.
SPL electronics GmbH, D-41372 Niederkrüchten, Germany
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|