®
Owner´s Manual
®
STEREO
Models 9319, 9320
SOUND PERFORMANCE LABORATORY
Download from Www.Somanuals.com. All Manuals Search And Download.
Forword
3
4
4
5
Contents
Introduction
Operation safety
Connections
Applications
Studio
6
Tape - duplication
7
Broadcast
7
Sound reinforcement
Video & film post production
8
8
First steps
9
The control elements of the STEREO VITALIZER
11
11
11
11
12
13
14
15
15
15
16
17
VITALIZER ACTIVE
PEAK
BASS
MID-HI TUNE
PROCESS
HARMONICS
SURROUND PROCESSOR IN
STEREO WIDTH
Power supply
Specifications
Warranty
Dear customer,
Foreword
Thank you for the confidence you have shown towards SPL electronics
GmbH by purchasing the SPL STEREO VITALIZER, one of the most powerful
and creative signal processors currently available. The STEREO VITALIZER is a
first-rate sound processor with exemplary performance, excellent work-
manship and unrivalled sound quality.
Please study this owner´s manual carefully so that you can make the
most of the wide range of possible applications offered by the STEREO
VITALIZER and to ensure ease of operation.
We have tried to write this manual in such a way that it is easy to under-
stand, with as clear a layout as the complexity of such a sophisticated
product allows. The manual is divided into two columns throughout. The
main column contains a detailed description whilst the margin contains
headings and summarized information.
We wish you every success and unlimited enjoyment with your new
STEREO VITALIZER.
SOUND PERFORMANCE LABORATORY
SPL electronics GmbH
STEREO
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The STEREO VITALIZER is an equalizer concept which makes use of scientific
psychoacoustic technology to process audio signals. The unique combina-
tion of dynamic equalizers, amplitude-controlled phase correction and
harmonic filtering in the STEREO VITALIZER opens up a whole new listening
dimension by adapting the sound pattern to the non-linearities of the
human ear.
Introduction
The STEREO VITALIZER gives the mid frequencies accurate transparency
with a soft, unobtrusive sound. The treble and harmonics range is
reworked with broadband shelving filters, which focus on achieving a
smooth, silky sound pattern. High frequencies are livened up without them
sounding hard or agressive. The STEREO VITALIZER uses a newly developed
filter network to process the low frequency range. The bass is accentuated
without any risk of emphasizing the lower mid frequencies unnaturally.
You can choose between a dry, percussive bass (TIGHT) or a punchy, soft and
very deep sound character (SOFT). The result is a pleasanter and livelier
sound pattern with an unrivalled wealth of detail. The STEREO VITALIZER is
especially designed to serve the needs in mastering, cutting and post
production work. Used on complete mixes, the STEREO VITALIZER will perform
the same task as those esoteric and costly equalizers often used for audio
sweetening but with far greater tonal flexibility and at a much lower cost.
The STEREO VITALIZER may also be teamed up with a single-ended noise
reduction system to provide the ultimate, low-cost post production clean-
up system for treating old masters which are often tonally dull as well as
noisy. You will be amazed by how transparent and powerful almost every
audio signal sounds after it has been processed with the STEREO VITALIZER!
In 1993 the »Golden Ear«
Award was presented to SPL
by Europe´s biggest HiFi-
magazine »Audio«.
In 1994 the »Stage Design«
Award was presented to SPL
by the »Artist« magazine for
the exceptionally perfor-
mance on stage.
The housing of the STEREO VITALIZER has the standard 19" EIA format and
occupies 1 unit (1 U = 44 mm) in your rack. When installing the unit in a
19"-rack, the rear side of the unit needs some support, especially in a
touring case. The STEREO VITALIZER should not be installed near units which
produce strong magnetic fields or extreme heat. Do not install the STEREO
VITALIZER directly above or below power amplifiers or digital processors. If
possible, the STEREO VITALIZER should be placed in an »analog rack« where
the majority of (or all) the equipment installed is analog. This eliminates
problems which could result from interfering high-frequency signals such as
clock frequencies, MIDI or SMPTE control signals.
Operation safety
Important security
advices
-please read them carefully!
Check that the voltage details quoted on the back panel are the same as
your local mains electricity supply (Model 9320 only). Use a minus (-)
screwdriver to set the voltage selector to the voltage for the area in which
the unit will be used. Never cover up the ventilation slots on the top of the
unit. If, during operation, the sound is interrupted or indicators no longer
illuminate, or if abnormal odor or smoke is detected, or if water is spilled
on the unit, immediately disconnect the power cord plug and contact your
dealer or Authorized Service Center.
Only clean your STEREO VITALIZER with a soft, lint-free cloth. Use only stan-
dard cleaning agents. Never use alcohol or paint thinner, because they may
damage the finish.
STEREO
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before connecting the STEREO VITALIZER switch the power off at all
connected units.
Connections
The STEREO VITALIZER is available in two version up to autumn 1995:
Version 1:
Version 2:
unbalanced jack version (mono-1/4“ jacks wired tip hot)
professional version with unbalanced (switching mono-
1/4“jacks wired tip hot) and electronically balanced
(3-pole XLR wired pin 2 hot) connectors. (Unbalanced
connections are preferred; XLR´s may remain connected)
From autumn 1995 only version 2 will be available.
Insert your STEREO VITALIZER into the Master-Inserts or Sub-Groups
Inserts of the console!
Never connet the STEREO VITALIZER between console and amplifier! Each
fader movement will result in a tonal change of the STEREO VITALIZER-effect,
as the input sensitivity is varied. Furthermore, impedance problems might
cause additional noise.
A switch on the rear panel sets the input operating level for both chan-
nels. Two positions are available: The LOW-position indicates that the input
sensitivity of the STEREO VITALIZER is low, which means high level signals can
be processed at this position. Conversely, the HIGH-position is used for low
level signals, as the input sensitity is high.
The unit may be run hotter if desired by switching the level setting from
the HIGH to the LOW working level with the proviso that the PEAK LEDs on
the front panel are not regularly flashing. This will achieve processing at a
lower input sensitivity and will result in a more intensely processed sound.
Conversely, in order to achieve milder processing, the switch may be set
from LOW to HIGH.
Should the need arise to use the XLR connectors in an unbalanced
system, pin 3 of both the input and output connectors should be grounded.
Note that unbalancing the output in this way will cause a level increase of
6dB. Follow the diagram below:
The Pin assignment of the XLR-connectors is Pin 2 = hot (+).
Inputs
Outputs
balanced
unbalanced
balanced
unbalanced
Pin
wiring:
1 = Ground
2 = hot (+)
3 = cold (-)
STEREO
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1. The most obvious application of the STEREO VITALIZER is to process a
final mix, either while mixing or during post-production prior to cutting.
Insert your STEREO VITALIZER into the master-inserts of your console or right
in between a playback and a recording unit.
Applications:
Studio
It is important to use full-range monitors to assess the effect of any bass
processing in and out of circuit in order to appreciate just how much
processing has been added; the brain soon acclimates to changes in timbre
and it is easy to overdo it! If in doubt, refer frequently to known recordings
played through the same monitor system.
Do not connect the STEREO VITALIZER between master-outputs and
amplifier. The major disadvantage of this connection is the varying input
sensitivity with each fader movement.
When patching the STEREO VITALIZER into the sub-groups or master-breaks
of the console, note if the master breaks are switched »pre« or »post«
fader. They should best be switched »pre« fader, so that a variation of the
master fader does not affect the input level of the STEREO VITALIZER. The
effect level and the treated sound will then remain unchanged.
Application 1:
The STEREO VITALIZER inserted into
the Master-Inserts of the console.
2.
Another popular stereo application is the processing of existing
master tapes during post-production such as when reprocessing archive
material for CD release.
If a single-ended noise reduction system is used to clean up the original,
the STEREO VITALIZER can make a significant contribution in restoring the
high end detail that invariably suffers during such treatment. In many
cases, the restored master can be made to sound appreciably better than
the original.
Application 2:
The STEREO VITALIZER inserted
between Noise-Reduction and
Recorder to improve archived
recordings.
STEREO
6
Download from Www.Somanuals.com. All Manuals Search And Download.
In the field of electronic music, the STEREO VITALIZER can be used to add
new range and depth to samplers and synthesizers and also to further
process existing effects such as delay and reverberation. Even budget
instruments and processors with limited audio bandwidths can be made
sound full-bodied and detailed.
If you want to use a compressor in the master chain after the console, use
your STEREO VITALIZER after the compressor. You can then be sure that the
STEREO VITALIZER will receive a level-corrected signal which helps him to
even operate more precise. If you use the STEREO VITALIZER before the
compressor negative side-effects such as pumping even could be emphasized.
Application 3:
The STEREO VITALIZER inserted
between Compressor und
Recorder.
Tape duplication is often made at high speed resulting in a deterioration
of the high frequency spectrum of the copies. By processing the output
from the source machine, additional brightness can be added to compen-
sate for deficiencies in the copying system. It may also be necessary to
modify the bass end as many high speed systems fail to reproduce the bass
end of the spectrum faithfully. In both areas, the STEREO VITALIZER is both
effective and simple to set up.
Tape -
Duplication
Real-time duplication is getting more and more popular. In that applica-
tion the STEREO VITALIZER offers the same advantages as described under
»Studio« and »Video & Film Post Production«.
The STEREO VITALIZER is perfectly suited to the production of radio jingles,
commercials and station idents. Because of the psychoacoustic nature of
the processing, the treated signal will appear louder, closer, brighter and
more intelligible than whatever was played immediately beforehand, thus
creating a powerful impact.
Broadcast
In commercial radio, the STEREO VITALIZER can be used to process the
entire on-air signal helping the radio station stand out from the competi-
tion. The integral surround processor can also be used to create a wider
stereo spread which is important when most of the audience are listening
on systems with a narrow speaker geometry such as is the case with in-car
sound and portable stereo music systems.
STEREO
7
Download from Www.Somanuals.com. All Manuals Search And Download.
In live performance or in club installations, the STEREO VITALIZER is a
powerful ally in maintaining speech intelligibility under difficult conditions.
It is also of great benefit in systems designed to play recorded music
because the illusion of loudness can be maintained at lower absolute SPLs.
This could be particularly beneficial with the introduction of new noise
level legislation. On the subjective side, the STEREO VITALIZER helps produce
a detailed, tight sound, even from indifferent speaker systems giving an
improvement in perceived audio quality.
Sound
Reinforcement
The STEREO VITALIZER can be of great value when mixing under time-pres-
sure. You can almost leave the onboard EQs flat and create the FOH sound
with the STEREO VITALIZER in the master inserts.
As in other areas, the STEREO VITALIZER can be used to sharpen and enri-
chen dialogue, even when the microphone placement is less than optimum
as is often the case when filming due to the need to keep the mic out of
shot. Music soundtracks benefit in the ways already described for audio-
only applications and the fact that the STEREO VITALIZER is so quick to set up
can save a lot of wasted time spent tuning multi-band equalizers.
Video & Film
Post Production
Time-compressed audio can also be treated to restore the lack of timbre
so often caused by such intensive processing. This is particularly valid in the
case of vocal narratives as even a relatively small amount of time-
compression or expansion can dramatically compromise the sound quality.
On the post production work on Spike Lee´s "Malcom X" movie the voice
of Denzel Washington playing Malcolm X was treated with the VITALIZER
for dramatical reasons:
"We wanted to make sure that there was a dramatic quality difference
between the voice-over and the sync dialog," Fleischman adds, offering a
mixer´s view. "You try to find a balance between two center mics then
balance that with whatever you´re using from left-right pair. We then
treated it with the SPL VITALIZER, a psychoacoustic equalizer. It brings a lot
more presence to the upper end of the spectrum and a very deep low end
so that the voice sounds full."
Mix Magazine, December 1992
STEREO
8
Download from Www.Somanuals.com. All Manuals Search And Download.
When setting up the STEREO VITALIZER for the first time, it is wise to
approach the controls in a specific order to avoid confusion and to achieve
positive results right from the start. Use a CD as source.
First steps
Set-up positions:
-
-
-
-
-
BASS to zero (center position)
HARMONICS to MIN (counter clockwise)
MID-HI TUNE to 3,5 kHz (center position)
PROCESS to MIN (counter clockwise)
STEREO EXPANDER to min (counter clockwise)
1. Press the ACTIVE switch. There is no audible change in the sound at
this stage.
2. Slowly move the PROCESS control in from the extreme left. You will
find that there is no audible change in the sound until the MIN position (ca.
11 o'clock). That is just how it should be. All frequencies from 3.5 kHz
(initial setting MID-HI TUNE) are only raised with increasing intensity above
this point. First set the PROCESS control at 3 o'clock. The bass range is not yet
influenced at this point.
3. The next step is to shift the BASS control from the zero position to
both sides. Watch out for the differing bass sounds nuances.
Turn to the right: The bass sounds tight and dry.
Turn to the left: The bass sounds soft and round.
You should perform these hearing tests on appropriate »full-range«
monitors because near-field monitors normally cannot reproduce the deep
bass generated by the STEREO VITALIZER in its entirety. Decide on a bass
sound of the desired amplitude.
4. Now start varying MID-HI TUNE. The original setting is 3.5 kHz. Turn
to the right: The programme material sounds brighter and gets more mids
from about 1.5 kHz. The impression you hear is the reverse of the poten-
tiometer scaling: the lower the frequency, the brighter and clearer sounds
the programme material. This is because the MID-HI TUNE control sets a
starting frequency above which all frequencies are processed. If this star-
ting frequency is lowered, the frequency spectrum included in processing
increases. The programme material then sounds brighter and clearer.
Turning the control to the left shifts the starting frequency from 3.5 kHz
to higher frequencies. The programme material then sounds increasingly
dull, because fewer and fewer frequencies are being included in the
process, the higher the frequencies become. The setting you choose is a
matter of personal taste.
STEREO
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5. A section within the STEREO VITALIZER with one of the most decisive
influences on the sound is PROCESS control. If you continue to turn the
PROCESS control up, more of the signal is added to the BASS and MID-HI TUNE
sections whilst dominant mid frequencies are reduced according human
hearing at the same time. The below sections contain more detailed infor-
mation on this aspect. Familiarize yourself with the sound changes before
deciding on the setting which sounds best.
Firteps
6. We shall now turn our attention to the HARMONICS control. Note the
improved detail in the high frequency range, the further you turn the
control in. In practice, values between 4 and 6 have proved to be the most
common.
The HARMONICS are accentuated by the STEREO VITALIZER with equalizer
technology, unlike other procedures. Previously, so-called »Exciters«,
devices to generate harmonic tones, produced their harmonics with the aid
of a generator which mainly added type K3 and type K5 distortions to the
signal (odd harmonics of 3rd and 5th order). The familiar disadvantages of
this principle are as follows: although odd harmonics do add to the brilli-
ance of the audio signal to a significant degree, they tend to be somewhat
sharp, which leeds to hearing fatigue for listeners. Another pitfall is that the
distortions added were not part of the original signal.
The STEREO VITALIZER accentuates the harmonics which are also part of the
original signal! The HARMONICS filters are designed in such a way that even
and odd harmonics (K2, K3, K4, K5...) are accentuated equally. This makes
the processed signal more natural with a soft, silky-sounding top-end.
Once you have selected the setting for the HARMONICS control you can sit
back to listen to the new sound image.
7. Finally, activate the SURROUND PROCESSOR turn up the STEREO WIDTH
control to the 12h-position and note the soft spreading stereo image.
8. Switch VITALIZER ACTIVE off to return to the original signal. If you now
say »I don't believe that« or »Booh«, you belong to the overwhelming
majority of those people who have ever heard a VITALIZER. It was this sound
impression which led to VITALIZER technology winning awards like the
»Golden Ear« from Europe's biggest »Audio« magazine for the most inno-
vative product in 1993.
STEREO
10
Download from Www.Somanuals.com. All Manuals Search And Download.
The control
5
4
7
3
elements of the
STEREO VITALIZER®
2
6
8
1
The VITALIZER ACTIVE function switches the STEREO VITALIZER on or off. The
status LED indicates that the STEREO VITALIZER has been activated.
The VITALIZER ACTIVE function is a relais-hard-bypass function. In the event
of a power failure the STEREO VITALIZER is automatically switched to hard-
bypass (power failure safety).
Vitalizer
Active
1
To increase the operational safety of the monitor loudspeakers you
should not switch the STEREO VITALIZER on or off at high monitor volume. At
high amplitudes inside the filter, there may be residual charges on the swit-
ching contacts which may be discharged when you switch over. These may
become apparent as audible click sounds. If applicable, reduce or mute the
monitor loudspeakers before switching on or off.
The input stages of the STEREO VITALIZER are equipped with PEAK LEDs
which light up around 3 dB before the effect signal path is potentially over-
driven. Make sure that the PEAK LEDs only light up briefly, if at all. It is
essential to avoid the PEAK LEDs being lit up for any length of time. If they
do so, reduce the input level or switch from LOW to HIGH on the rear of the
unit.
2
3
Peak
Bass
The BASS control is responsible for the »colour« of the bass sound your
signal is to have. If you move the BASS control to the right, you get a drier,
percussive bass sound, known as TIGHT. As a result of this, on the right-
hand side of the scaling points, there are squares which increase in size, in
line with increased intensity. They symbolize the contoured »TIGHT« bass
sound.
If the BASS control is moved from the centre position (0) to the left, the
bass sound becomes very deep, soft and warm. This sound is known as
SOFT. This is symbolized with round scaling points which also increase in
size as the intensity increases.
The further the BASS control is shifted to the right or left of the centre
position, the more intensive the bass sound in question. However, PROCESS
must be positioned to the right of the MIN setting for the bass to be
audible.
You can always hear the original (dry) bass if the BASS control is in a
centre position.
STEREO
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The PROCESS control determines the processing ratio between the set
bass sound colour and the original signal. This results in varying bass
sound structures: if you combine high bass amplification on the BASS
control with a lower PROCESS value, you get a different bass structure than
with a lower bass amplification combined with a higher PROCESS value.
Choosing the best solution is a matter of personal taste and also depends
on the type of original signal involved.
Fig.1:
The dotted line shows
frequency responses for a
soft Bass (SOFT) at
Crolments
maximumPROCESS and a
MID-HI TUNE of 3.5 kHz.
The solid line shows the
phase response, which
always drifts only a few
degrees if the amplitude is
increased.
Fig. 2:
The dotted line shows
frequency responses for a
hard Bass(TIGHT) at
maximum PROCESS and a
MID-HI TUNE of 3.5 kHz.
The solid line shows the
phase response whichhas a
phase relation of -180° at
50 Hz, but otherwise also
drifts only by a few degrees
at increasing amplitudes.
The MID-HI TUNE control is used to set the starting frequency of the
broad-band shelving filter. In line with the setting of PROCESS control, all
frequencies above this value right through to the end of the audio range
are processed.
Mid-Hi Tune
4
The control range of the MID-HI TUNE control is between 1 kHz (extreme
right) and 20 kHz (extreme left). In practice, common settings vary
between 3.5 kHz and 8 kHz.
As the human ear perceives the range between 1 kHz and 3 kHz parti-
cularly clearly, at all volumes between 0 and 120 phon it makes sense to
adapt this frequency range. You might feel inclined to say "Yes, but I do that
with my graphic EQ as well". The main difference is that the graphic EQ
really reduces the effective loudness of the frequency, i.e. cuts out the
STEREO
12
Download from Www.Somanuals.com. All Manuals Search And Download.
appropriate frequencies, thus changing the spectral content of the original
signal. The STEREO VITALIZER , however, relies on a more subtle method of
amplitude-depending phase shifting. This does not involve altering the
spectral composition of the signal but it does maintain the subjective
impression of loudness. Moreover, graphic equalizers produce comb-filter
effects because of the interaction between adjacent filters, when broad-
band frequencies are raised. The MID-HI TUNE filter can raise the broad-
band spectrum with a very linear frequency response, without colouring
the signal.
Above the MID-HI TUNE value set, the STEREO VITALIZER filters create a
linear increase, i.e. one that is adapted to the human ear. This compensates
any inability of our hearing as regards perceiving frequencies ranging
between 5 kHz and 10 kHz. The MID-HI TUNE filter works with a wide
bandwidth and always sounds musical, never »bell-like«. Gradually go
down from 20 kHz (extreme left) to lower frequencies. The further down
you go, the brighter the sound image becomes, as an increasing number of
frequencies are included in the process.
Crolments
The MID-HI TUNE control can also be used to tone down excessively
sharp-sounding material, by setting frequencies of 10 kHz or higher, and
setting the PROCESS control on MAX. Seeing as the PROCESS control is also
responsible for deleting dominant mid frequencies, all frequencies are
gradually reduced down to the application frequency, in conjunction with
high starting frequencies of the MID-HI TUNE control.
Fig. 3:
Five frequency responses are
shown for the MID-HI TUNE
filter at max. PROCESS value
and BASS at 0.
1. 1 kHz
2. 2 kHz
3. 3,5 kHz
4. 8 kHz
5. 20 kHz
The PROCESS control determines the ratio between BASS and MID-HI TUNE
to the original signal. The HARMONICS control is not affected by the PROCESS
control.
Process
5
The PROCESS control also determines the damping intensity of dominant
mid frequencies. This allows rapid adaptation to the loudness curves
(Fletcher-Munson curves, curves of equal loudness).
The human ear perceives the audio frequency spectrum at varying sound
pressure levels very differently. Perception is by no means »linear«. The
STEREO
13
Download from Www.Somanuals.com. All Manuals Search And Download.
STEREO VITALIZER alters the frequency spectrum in such a way that the
balance is maintained between all frequency ranges even at varying
monitor volumes. For the human ear, the sound is more pleasant and
easier to perceive than the original. In other words, increasing the PROCESS
value also increases the intensity of the MID-HI TUNE filter and the BASS
filter, whilst dominant mid frequencies are damped by amplitude-
controlled phase shiftings. This improves the perception of loudness, clarity
and the bass punch, i.e. the strength and fullness of the audio signal.
Fig. 4:
The dotted line shows
frequency responses for a
soft Bass (SOFT) at varying
PROCESS and a MID-HI TUNE
of 3.5 kHz.
Crolments
The solid line shows the
phase responses, which
always drift only a few
degrees if the PROCESS inten-
sity is increased.
The diagram shows very
clearly that the mid attenua-
tion gets stronger as the
PROCESS value increases.
The STEREO VITALIZER works with steep filters and controlled changes of
the phase relationships of the harmonics to process the harmonics struc-
ture.
Harmonics
6
We consciously did without the generator principle of »Exciters«. The
STEREO VITALIZER's harmonic filter does not add any distortions to the
original signal, unlike with the generator principle. It extracts all the infor-
mation it needs from the original signal. This significantly reduces the
hearing fatigue effect on the listener. By influencing the phase relationship
in an intelligent fashion, the harmonics which have been filtered out are
emphasized with increasing addition expressed as a percentage. The effect
significantly improves the speech intelligibility and the transparency. Old
archived recordings sound fresh and silky again. The brilliance of any audio
signal can be improved without it sounding sharp.
An improved harmonic struc-
ture results in a silky top-end
with far better separation
and intelligibility.
The HARMONICS filter derives its input signal from the original signal and
the output of the MID-HI TUNE filter. If you close the PROCESS control
(extreme left), the BASS and MID-HI TUNE controls do not function any more.
You can then listen to the HARMONICS control separately.
The second potentiometer level of the MID-HI TUNE control is responsible
for the cut-off frequency of the HARMONICS filter. A variation of the MID-HI
TUNE control alters the cut-off frequency (fundamental tone) of the harmo-
nics. Both filters complement each other in an ideal fashion as they each
always process the part of the audio signal which is not being processed by
the other filter. If the MID-HI TUNE control is set at 20 kHz, the HARMONICS
STEREO
14
Download from Www.Somanuals.com. All Manuals Search And Download.
filter intervenes at low frequencies. If the MID-HI TUNE filter is at 1 kHz, the
HARMONICS filter affects higher frequencies. The characteristics of the two
filters therefore complement each other in an ideal fashion.
The IN switch switches the SURROUND PROCESSOR on or off. The status-LED
indicates, that the SURROUND PROCESSOR is activ. The IN switch works only
when the VITALIZER ACTIVE switch is activated.
Surround
Processor
In
7
In case you want to monitor the SURROUND PROCESSOR in isolation, switch
VITALIZER ACTIVE on and set the PROCESS and HARMONICS control fully counter
clockwise.
The STEREO WIDTH potentiometer controls the stereo image.
Working on estabilshed inter-channel phase principles, the STEREO WIDTH
control is be used to increase the subjective soundstage width of any stereo
source. The off-centre signals of the stereo source are detected and fed
back to the opposite channel phase inverted.
Stereo Width
8
This effect can be applied to overall mixes as well as to single instru-
ments. Very interesting is the spreading of the stereo image of overhead
mics of drum-sets or choruses or horn sections.
Based around a toroidal transformer, the integral power supply is
designed to minimize induced hum and noise due to the non existence of
an air-gap.
Power supply
On the XLR/jack-version (9320) the primary voltage may be selected
between 230V/50Hz and 115V/60Hz by means of a recessed slide switch
on the rear panel. The jack-version is set according to local requirements.
The XLR/jack-version (9320) features a rear-panel ground-lift switch
which may be used where ground loops are causing hum problems. When
the GND LIFT switch is set to off, the circuit ground is no longer connected to
the chassis ground. The power cord connector is a 3-wire, U-ground, stan-
dard IEC mains connector for a detachable power cord (enclosed).
The unbalanced jack version (9319) has a two wire power cord obviating
the need of the ground lift switch.
Transformer, power cord and mains connector have VDE, UL and CSA
approvals. The fuse has a value of 200mA.
On the secondary side of the power supply, an RC combination is used to
filter out noise and hum voltages from the mains side. Both half-waves are
smoothed with 2200 µF capacitors in the positive and negative voltage
path. Both pathes are calibrated separately via trimmers, as deviations of
only a few millivolts can result in audible changes such as a diffuse sound
pattern. After the calibration stage, the current is again smoothed.
STEREO
15
Download from Www.Somanuals.com. All Manuals Search And Download.
STEREO VITALIZER Rear Panel
Specifications
Version 1
(Model 9319, unbalanced jack-version, until autumn 1995)
- unbalanced input & output stages (0 dB)
- mono-1/4inch-jacks
- 2-wire power cord
- relais-hard-bypass
Version 2
(Model 9320, unbal. jacks & bal. XLR-Version)
- balanced (+6 dB) & unbalanced (0 dB) input & output stages
- NC3 XLR-connectors and mono-1/4inch-jacks
- voltage selector: 220-240 V/50 Hz or 100-120 V/60 Hz
- detachable 3-wire, U-ground power cord
- GND-Lift switch
- relais-hard-bypass
Specifications
Frequency bandwidth
10 Hz - 100 kHz (100 kHz = -3dB)
Equalizer frequency range
15 Hz - 22 kHz
CMRR (common mode rejection)
-85dBu at 100 Hz
-76dBu at 1 kHz
-65dBu at 15 kHz
THD & N
(total harmonic distortion & noise)
0,002% at 1 kHz
0,105% at 10kHz
Signal to noise - CCIR 468
Bypass:
-96dBu
In/Effekt min: -78dBu
Input & output stages
XLR: instrumentation amplifier, electronically balanced
(differential) transformerless
nominal input level
Jack: unbalanced
+6 dB
0 dB
nominal input level
Input impedan ce (XLR, jack)
Output impedance (XLR)
Output impedance (jack)
= 20 kOhm
= 75 Ohm
< 600 Ohm
Input level selector
Peak indicators
Size
LOW (0dB) / HIGH (+8dB)
illuminate 3dB before clipping
Standard EIA 19"/1U unit,
482 x 44 x 237mm
Model 9319: 2,7kg
Model 9320: 3,0kg
Weight
STEREO
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SPL electronics GmbH (hereafter called SPL) products are warranted only in the
country where purchased, through the authorized SPL distributor in that country,
against defects in material or workmanship. The specific period of this limited
warranty shall be that which is described to the original retail purchaser by the
authorized SPL dealer or distributor at the time of purchase.
Warranty
SPL does not, however, warrant its products against any and all defects:
1) arising out of materials or workmanship not provided or furnished by SPL, or
2) resulting from abnormal use of the product or use in violation of instructions, or
3) in products repaired or serviced by other than authorized SPL repair facilities, or
4) in products with removed or defaced serial numbers, or 5) in components or
parts or products expressly warranted by another manufacturer.
SPL agrees, through the applicable authorized distributor, to repair or replace
defects covered by this limited warranty with parts or products of original or
improved design, at its option in each respect, if the defective product is shipped
prior to the end of the warranty period to the designated authorized SPL warranty
repair facility in the country where purchased, or to the SPL factory in Germany, in
the original packaging or a replacement supplied by SPL, with all transportation
costs and full insurance paid each way by the purchaser or owner.
All remedies and the measure of damages are limited to the above services. It is
possible that economic loss or injury to person or property may result from the
failure of the product; however, even if SPL has been advised of this possibility,
this limited warranty does not cover any such consequential or incidental
damages. Some states or countries do not allow the limitations or exclusion of
incidental or consequential damages, so the above limitation may not apply to
you.
Any and all warranties, express or implied, arising by law, course of dealing,
course of performance, usage of trade, or otherwise, including but not limited to
implied warranties of merchantability and fitness for particular, are limited to a
period of 1 (one) year from either the date of manufacture. Some states or coun-
tries do not allow limitations on how long an implied warranty lasts, so the above
limitations may not apply to you.
This limited warranty gives you specific legal rights, and you may also have
other rights which vary from state to state, country to country.
SPL electronics GmbH
41372 Niederkrüchten, Germany
STEREO
17
Download from Www.Somanuals.com. All Manuals Search And Download.
|