3-067-104-11 (2) GB
Video Cassette
Recorder
Operating Instructions
PAL
SLV-X9G
© 2001 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
63 Playing/searching at various speeds
65 Setting the recording duration time
66 Synchronized Recording
68 Checking/changing/cancelling
timer settings
70 Recording stereo and bilingual
programmes
72 Searching using the Smart Search
function
74 Storing, searching and deleting
programme information (Smart
Search Plus)
79 Searching using the index function
80 Adjusting the picture
consumption
4 Index to parts and controls
9 Step 1 : Unpacking
10 Step 2 : Setting up the remote
commander
14 Step 3 : Connecting the VCR
20 Step 4 : Setting up the VCR with
the Auto Set Up function
VCR
30 Selecting a language
31 Presetting channels
34 Changing/disabling programme
positions
39 Setting the clock
43 Setting your personal code
83 Changing menu options
86 Connecting to a VCR or stereo
system
88 Basic editing
45 Playing a tape
47 Recording TV programmes
51 Recording TV programmes using
the Dial Timer
89 Audio dubbing
56 Recording TV programmes using
the VIDEO Plus+ system
60 Recording TV programmes using
the timer
90 Troubleshooting
94 Specifications
95 Index
Back Cover
Quick Start Guide
Table of contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Index to parts and controls
Refer to the pages indicated in parentheses ( ) for details.
Front panel
B Tape compartment
M
DIAL TIMER (51)
P AUTO SET UP/RF (Radio
Frequency) CHANNEL button (20)
Q SYNCHRO REC (Synchronized
Recording) button (66)
R t LINE-2 L (left) o R (right)
How to open the jack cover
1 Press the bottom of the cover.
2 Hook your finger on the top edge of the
cover and pull it open.
Index to parts and controls
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Display window
STEREO NICAM
SYNCHRO
VIDEO VPS SPLP OPC
PDC EP STB
TV
RR
J OPC (Optimum Picture Control)
indicator (81)
E
(smartlink) indicator (16)
N Time counter/clock/line/programme
G VPS (Video Programme System)/
PDC (Programme Delivery Control)
indicator (58)
continued
Index to parts and controls
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
E i LINE-1 (TV)
F
(audio out) R/D (right) L/G (left)
jacks (19)
C AERIAL IN
ANTENNE ENTREE connector (14)
G STB CONTROL
D AERIAL OUT
ANTENNE SORTIE connector (14)
Index to parts and controls
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote commander
F SP (Standard Play)/LP (Long Play)
button (47)
G
1
4
7
2
5
8
0
3
6
9
M FF (fast-forward)/, button
*FASTEXT buttons (for TV)
continued
Index to parts and controls
7
Download from Www.Somanuals.com. All Manuals Search And Download.
M [TV] / [VIDEO] remote control switch
a TV power on/TV mode select
Q ./> INDEX SEARCH
buttons* (79)
1
4
7
2
5
8
0
3
6
9
c/C Teletext page access buttons
W
*FASTEXT buttons (for TV)
Index to parts and controls
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 : Setting up the remote commander
Inserting the batteries
Insert two R6 (size AA)
batteries by matching the + and
– on the batteries to the
diagram inside the battery
compartment.
Insert the negative (–) end first,
then push in and down until the
positive (+) end clicks into
position.
Using the remote
commander
Remote sensor
You can use this remote
commander to operate this
VCR and a Sony TV. Buttons
on the remote commander
marked with a dot (•) can be
used to operate your Sony TV.
If the TV does not have the
symbol near the remote sensor,
this remote commander will
not operate the TV.
[TV] /
[VIDEO]
1
4
7
2
5
8
0
3
6
9
To operate
the VCR
Set [TV] / [VIDEO] to
[VIDEO] and point at the remote sensor at the VCR
a Sony TV
[TV] and point at the remote sensor at the TV
Setting up the remote commander
10
Download from Www.Somanuals.com. All Manuals Search And Download.
?/1
WIDE
/
a
AUDIO MONITOR
FASTEXT buttons
DISPLAY
t TV/VIDEO
1
4
7
2
5
8
0
3
6
9
Programme
number
buttons
-/--
PROG +/–/
c/C
2 +/–
TV control buttons
To
Press
Set the TV to standby mode
Select an input source: aerial in or line in
Select the TV’s programme position
?/1
t TV/VIDEO
Programme number buttons,
-, PROG +/–
continued
Setting up the remote commander
11
Download from Www.Somanuals.com. All Manuals Search And Download.
To
Press
Adjust the volume of the TV
Switch to TV (Teletext off)
Switch to Teletext
2 +/–
a (TV)
/ (Teletext)
AUDIO MONITOR
FASTEXT buttons
Select the sound
Use FASTEXT
Call up the on-screen display
Change the Teletext page
DISPLAY
c/C
Switch to/from wide mode of a Sony wide TV (For WIDE
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery together with an old one.
• Do not use different types of batteries together.
• Some buttons may not work with certain Sony TVs.
Controlling other TVs with the remote commander
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the following table, set the appropriate manufacturer’s code
number.
1 Set [TV] / [VIDEO] at the top of the remote commander to [TV].
Hold down ?/1, and enter your TV’s code number using the programme
number buttons. Then release ?/1.
2
Now you can use the following TV control buttons to control your TV:
?/1, t TV/VIDEO, programme number buttons, - (ten’s digit),
PROG +/–, 2 +/–, a (TV), / (Teletext), FASTEXT buttons, WIDE*,
MENU*, M/m/</,*, and OK*.
* These buttons may not work with all TVs.
Setting up the remote commander
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until
you find the one that works with your TV.
To switch to wide mode, see the footnotes below this table for the applicable
code numbers.
Manufacturer
Sony
Code number
Manufacturer
Panasonic
Philips
Code number
01*1, 02
17*1, 49
06*1, 07*1, 08*1
Akai
68
Ferguson
Grundig
Hitachi
JVC
52
Saba
12, 13
22, 23
25
10*1, 11*1
Samsung
Sanyo
24
33
Sharp
29
Loewe
Mivar
45
Telefunken
Thomson
Toshiba
36
43*2
38
09, 70
NEC
66
15, 16, 69*3
Nokia
*1 Press WIDE to switch the wide picture mode on or off.
*2 Press WIDE, then press 2 +/– to select the wide picture mode you want.
*3 Press WIDE. The menu appears on the TV screen. Then, press M/m/</, to
select the wide picture you want and press OK.
Tip
• When you set your TV’s code number correctly while the TV is turned on, the TV
turns off automatically.
Notes
• If you enter a new code number, the code number previously entered will be
erased.
• If the TV uses a different remote control system from the one programmed to work
with the VCR, you cannot control your TV with the remote commander.
• When you replace the batteries of the remote commander, the code number may
change. Set the appropriate code number every time you replace the batteries.
Setting up the remote commander
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 : Connecting the VCR
If your TV does not have a Scart (EURO-AV) connector
AERIAL IN
AERIAL OUT
Mains lead
to mains
AERIAL IN
Aerial cable (supplied)
: Signal flow
Disconnect the aerial cable from
AERIAL
ANTENNE
1
your TV and connect it to
AERIAL IN on the rear panel of
the VCR.
IN
ENTREE
OUT
SORTIE
AERIAL
Connect AERIAL OUT of the
VCR and the aerial input of your
TV using the supplied aerial cable.
ANTENNE
2
3
IN
ENTREE
OUT
SORTIE
Connect the mains lead to the mains.
Note
• When you connect the VCR and your TV only with an aerial cable, you have to
Connecting the VCR
14
Download from Www.Somanuals.com. All Manuals Search And Download.
If your TV has a Scart (EURO-AV) connector
AERIAL IN
i LINE-1
(TV)
AERIAL OUT
Mains lead
to mains
AERIAL IN
Aerial cable (supplied)
Scart
(EURO-AV)
: Signal flow
Scart cable (not supplied)
Disconnect the aerial cable from
your TV and connect it to
AERIAL IN on the rear panel of
the VCR.
AERIAL
ANTENNE
1
2
IN
ENTREE
OUT
SORTIE
AERIAL
Connect AERIAL OUT of the
VCR and the aerial input of your
TV using the supplied aerial cable.
ANTENNE
IN
ENTREE
OUT
SORTIE
Connect LINE-1 (TV) on the VCR
and the Scart (EURO-AV)
connector on the TV with the
optional Scart cable.
3
4
This connection improves picture
and sound quality. Whenever you
want to watch the VCR picture,
press t TV/VIDEO to display
the VIDEO indicator in the
display window.
Connect the mains lead to the mains.
Note
• If the TV is connected to the LINE-1 (TV) connector, setting the RF channel to
OFF is recommended. In the OFF position, only the signal from the aerial is
continued
Connecting the VCR
15
Download from Www.Somanuals.com. All Manuals Search And Download.
About the SMARTLINK features
If the connected TV complies with
SMARTLINK, MEGALOGIC*1,
EASYLINK*2, Q-Link*3, EURO
VIEW LINK*4, or T-V LINK*5, this
VCR automatically runs the
SMARTLINK function after you complete the steps on the previous page
(the
indicator appears in the VCR’s display window when you turn on the
TV). You can enjoy the following SMARTLINK features.
• Preset Download
You can download your TV tuner preset data to this VCR and tune the
VCR according to that data in Auto Set Up. This greatly simplifies the
Auto Set Up procedure. Be careful not to disconnect the cables or exit the
Auto Set Up function during the procedure.
• TV Direct Rec
49.
• One Touch Play
With One Touch Play, you can start playback automatically without turning
• One Touch Menu
You can turn on the VCR and TV, set the TV to the video channel, and
display the VCR’s on-screen display automatically by pressing MENU on
the remote commander.
• One Touch Timer
You can turn on the VCR and TV, set the TV to the video channel, and
display the timer recording menu (the TIMER METHOD menu, the
TIMER menu, or the VIDEO Plus+ menu) automatically by pressing
TIMER on the remote commander.
You can set which timer recording menu is displayed using TIMER
• Automatic Power Off
You can have the VCR turn off automatically, if the VCR is not used after
you turn off the TV.
*1 “MEGALOGIC” is a registered trademark of Grundig Corporation.
*2 “EASYLINK” is a trademark of Philips Corporation.
*3 “Q-Link” is a trademark of Panasonic Corporation.
*4 “EURO VIEW LINK” is a trademark of Toshiba Corporation.
*5 “T-V LINK” is a trademark of JVC Corporation.
Note
• Not all TVs respond to the functions above.
Connecting the VCR
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to your TV and Set-Top Box (STB)
If your STB does not have a Scart (EURO-AV) connector
Aerial cable (not supplied)
STB
STB
AERIAL IN
CONTROL
STB controller’s
side view
(supplied)
AERIAL OUT
iLINE-1 (TV)
AERIAL IN
Aerial cable (supplied)
Scart
(EURO-AV)
Scart cable* (not supplied)
: Signal flow
* If your TV does not have a Scart (EURO-AV) connector, the Scart cable connected
to the VCR is not required.
continued
Connecting the VCR
17
Download from Www.Somanuals.com. All Manuals Search And Download.
If your STB has a Scart (EURO-AV) connector
The illustration below shows an example of connecting the STB to LINE-3 IN. In this
Scart cable (supplied with
STB
the STB)
STB
CONTROL
tLINE-3 IN
STB controller’s
Side view
(supplied)
AERIAL IN
iLINE-1
(TV)
AERIAL OUT
AERIAL IN
Aerial cable
Scart
(supplied)
(EURO-AV)
Scart cable (not supplied)
: Signal flow
You can watch programmes from the Set-Top Box connected to this VCR on your TV
even when the VCR is turned off using the Line Through function. When you turn on
the STB, this VCR automatically sends the signal from the STB to the TV without
turning itself on.
1 Set POWER SAVE to OFF or PARTIAL in the OPTIONS-2 menu.
2 Turn off the VCR.
To watch a programme from the STB, turn on the STB and the TV.
Note
• You cannot watch programmes from your STB on the TV while recording unless
you record a programme from your STB.
Connecting the VCR
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional connections
To a stereo system
You can improve sound
quality by connecting a
stereo system to the
R/D L/G
R/D
LINE IN
L/G jacks as shown on the
right.
Audio cable (not supplied)
: Signal flow
To use the Line Through
function when
connecting to video
equipment other than a
Set-Top Box
t LINE-3 IN
LINE OUT
Using the Line Through
function, you can watch
programmes from other
equipment connected to this
VCR on the TV even when
the VCR is turned off. When
you turn on the other
Scart cable (not supplied)
: Signal flow
equipment, this VCR automatically sends the signal from the other
equipment to the TV without turning itself on.
Connect the other equipment to the LINE-3 IN connector as shown
above.
1
2 Set POWER SAVE to OFF or PARTIAL in the OPTIONS-2 menu.
3 Turn off the VCR.
To watch a programme, turn on the other equipment and the TV.
Note
• You cannot watch programmes on the TV while recording unless you are recording
a programme from other equipment.
Connecting the VCR
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set
Up function. With this function, you can set the TV channels, guide
channels for the VIDEO Plus+ system, RF cheannel, and VCR clock
automatically.
AUTO SET UP
AUTO
SET UP
Hold down AUTO SET UP on the VCR for more than three
seconds.
The VCR automatically turns on, and starts searching for all of the
receivable channels and presets them in the appropriate order for
RF CHANNEL
your local area.
If you want to change the order of the channels or disable unwanted
If you use the SMARTLINK connection, the Preset Download
function starts and the
during download.
indicator flashes in the display window
After the search or download is complete, the current time appears
in the display window for any stations that transmit a time signal. If
To cancel the Auto Set Up function
Press AUTO SET UP.
Notes
• If you cancel the Auto Set Up function, repeat the step above.
• Whenever you operate the Auto Set Up function, some of the settings (VIDEO
Plus+, timer, etc.) will be reset. If this happens, you have to set them again.
Setting up the VCR with the Auto Set Up function
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 : Tuning your TV to the VCR
If your TV does not have a Scart (EURO-AV) connector
Follow the steps below so that your TV will properly receive the video
signals from your VCR.
RF CHANNEL
PROGRAM +/–
Press RF CHANNEL on the VCR lightly.
AUTO
SET UP
1
The currently set RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
RF CHANNEL
Turn on your TV and select a programme position for the VCR
picture.
2
This programme position will now be referred to as the video
channel.
Tune the TV to the same channel
shown in the VCR display window so
that the picture on the right appears
3
SONY VIDEO CASSETTE RECORDER
clearly on the TV screen.
Refer to your TV manual for TV
tuning instructions.
If the picture does not appear clearly,
continued
Tuning your TV to the VCR
21
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO
Press RF CHANNEL.
4
SET UP
You have now tuned your TV to the VCR. Whenever you want to
play a tape, set the TV to the video channel.
RF CHANNEL
To check to see if the TV tuning is correct
Set the TV to the video channel and press PROGRAM +/– on the VCR. If
the TV screen changes to a different programme each time you press
PROGRAM +/–, the TV tuning is correct.
To obtain a clear picture from the VCR
If the screen does not appear clearly in step 3 above, press PROGRAM +/–
so that another RF channel appears. Then tune the TV to the new RF
channel so that a clear picture appears.
If your TV has a Scart (EURO-AV) connector
RF CHANNEL
PROGRAM +/–
AUTO
Press RF CHANNEL on the VCR lightly.
1
2
SET UP
The currently set RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
RF CHANNEL
PROGRAM
Press PROGRAM +/– to set the RF channel to OFF, and press RF
CHANNEL again.
AUTO
SET UP
RF channel set up is complete.
RF CHANNEL
Tuning your TV to the VCR
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6 : Setting the Set-Top Box
If you did not connect a Set-Top Box (STB), skip this step.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Connect the STB controller, remove the protection sticker on the STB controller and place it
on top of the STB, so that it hangs out over the infrared receptor on the STB front (see page
17).
• Refer to “Index to parts and controls” for button locations.
Press MENU, then press M/m to
highlight SETTINGS and press OK.
SETTINGS
1
MENU
SET-TOP BOX
TUNER
CLOCK
LANGUAGE
RETURN
PLAY
OK
SELECT
SET
:
: OK
EXIT : MENU
Press M/m to highlight SET-TOP
BOX, then press OK.
SET-TOP BOX
2
3
STB CONNECTION
RETURN
OFF
PLAY
OK
SELECT
SET
:
: OK
EXIT : MENU
Press M/m/</,, to highlight STB
CONNECTION and press OK.
SET-TOP BOX
STB CONNECTION
RETURN
OFF
RF
LINE3
PLAY
OK
SELECT
:
CONFIRM: OK
EXIT : MENU
continued
Setting the Set-Top Box
23
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you connect the STB using the
aerial cable:
Press M/m/, to select RF and
press OK.
SET-TOP BOX
4
STB CONNECTION
STB BRAND NO.
PROGRAMME NO.
RETURN
RF
---
06
PLAY
OK
Press M/m to highlight
PROGRAMME NO. and press
OK. Enter the appropriate number
using M/m and press OK.
SELECT
SET
:
: OK
EXIT : MENU
• If you connect the STB using the
Scart (EURO-AV) cable:
Press M/m/, to select LINE3 and
press OK.
SET-TOP BOX
STB CONNECTION
STB BRAND NO.
RETURN
LINE3
---
SELECT
SET
:
: OK
EXIT : MENU
Press M/m, to highlight STB
SET-TOP BOX
5
BRAND NO. and press OK. Enter
the appropriate number using the
programme number buttons, then
25 for Set-Top Box brand number.
STB CONNECTION
STB BRAND NO.
PROGRAMME NO.
RETURN
RF
123
06
PLAY
OK
1
4
7
2
5
8
0
3
6
9
SELECT
SET
:
: OK
EXIT : MENU
Press MENU to exit the menu.
MENU
Notes
• If your VCR is connected to the STB by the aerial cable, enter the programme
number of the VCR corresponding to the channel where you have set up the STB
output in step 4.
• You cannot watch programmes from your STB on the TV while recording unless
you record a programme from your STB.
• It is recommended to connect your STB to the LINE-3 IN connector.
• For some STB, in order to avoid any conflict between the STB controller and the
VCR remote commander, be careful not to point the remote commander towards
the STB and the VCR at the same time.
• If POWER SAVE is set to FULL, you cannot watch or record programmes from
your STB during standby mode. Set POWER SAVE in the OPTIONS-2 menu to
OFF or PARTIAL.
Setting the Set-Top Box
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Set-Top Box brand number
To control the STB, enter the appropriate number corresponding to your
STB brand.
Some STBs may not operate at all with this VCR.
STB brand
ABC
Code numbers
025, 028
STB brand
Blaupunkt
Boca
Code numbers
184
ABsat
Akai
134, 843
254, 524, 840
526
Brain Wave
343
858
Alba
102, 265, 373,
432, 466, 526,
624
British Sky
Broadcasting
Brunor
Bush
420
Allantide
Amstrad
344
078, 102, 265
526, 679, 721
091, 224, 263,
349, 472, 520,
686, 700
BT
Cabletime
172, 282, 388,
459
Andover
Ankaro
555
Cambridge
Camundosat
Canal+
267, 355, 526
228, 231, 380,
530
104
864
864
373
829
097
Anttron
Arcon
Armstrong
Asat
194, 432
283, 379
254
Canal Satellite
Channel Master
CityCom
384
AST
332, 361, 362
119, 384, 529
Clyde
Astra
CME
091, 119, 184,
211
Astro
184, 369, 531,
559, 595
CNT
531
Audio Ton
Avalon
Axis
375
Comtec
Connexions
Conrad
277
407
104, 407, 469
377, 380
287
618
377
611
254
211
384
Birmingham
Cable
Communications
Contec
Cryptovision
Crown
British Telecom
Barcom
014, 116
228
Cyrus
Daewoo
Best
228, 380
continued
Setting the Set-Top Box
25
Download from Www.Somanuals.com. All Manuals Search And Download.
STB brand
D-box
Code numbers
STB brand
Galaxisat
GEC
Code numbers
734
332
097
864
346
582
346
DDC
373
Diskxpress
DNT
228
Gold Box
Goldstar
Gooding
Grothusen
Grundig
211, 407, 469
279, 470
690
Drake
Dynasat
Echostar
EEC
181, 407, 465
344
151,184, 339,
474, 582, 761,
540
EIF
428, 685
344
G-Sat
194
344
Einhell
Elta
Harting und
Helling
375
Hinari
194
Emanon
Emme Esse
Engel
432
Hirschmann
184, 344, 407,
408, 409, 513,
584, 592, 683,
762
708
461
Eurodec
Europa
Fenner
Ferguson
535, 537
708
Hitachi
Houston
Humax
Huth
466
679
059
728
078, 194, 347,
625, 722
231, 254, 375,
528, 600, 805
Fidelity
Finlux
263, 686
HyperVision
Ikusi Allsat
Imperial
IRTE
630
119, 355, 408,
425, 466, 525
379
Fraba Sat
Fracarro
France Telecom
Freecom
FTE
596
265, 496
620
060
462
ITS
632
346, 432, 745
277, 342, 422
874
ITT
119, 183
014, 025, 287
343
Jerrold
Johansson
JOK
FTE Humax
Fuba
183, 228, 308,
309, 380, 407,
425, 428, 432,
720
721
JSR
375
JVC
526, 582
Galaxis
375, 377, 844,
845
Setting the Set-Top Box
26
Download from Www.Somanuals.com. All Manuals Search And Download.
STB brand
Code numbers
STB brand
Multistar
Muratto
Navex
Code numbers
Kathrein
103, 134, 184,
211, 342, 369,
453, 491, 515,
564, 592, 633,
636
342, 475
346
343
NEC
189
Key West
König
805
Neusat
703, 845
231
103, 183, 184
342, 346
184
Newhaus
Next-Wave
Nikko
Kosmos
Kreiselmeyer
Kyostar
743
371
432
Nokia
692, 034, 119,
183, 339, 408,
425, 466, 584,
734, 832
La Sat
435, 475, 524,
531, 618
Lasat
833
Nordmende
Oceanic
Orbit
283, 373, 625
597
Lenco
346, 384, 422,
432, 461
Lion
364
361, 362
596
Lupus
380
Orbitec
Oxford
Pace
Luxor
119, 183, 584
535, 597
043
355
Macab
078, 194, 339,
347, 466, 802,
806, 858
Magnavox
Manhattan
Maranz
Maspro
466, 531
211
Pal
848
Palcom
Palladium
Panasonic
Panda
308, 309
582
103, 339, 347,
761
225
Matsui
355, 582
864
466
MediaSat
Mediamarkt
Memphis
Philips
630, 144, 211,
339, 466, 474,
582, 721, 761,
864
254
377
Micro
344
Technology
Phoenix
377
799
Minerva
Mintec
MNet
582
Phonotrend
Pioneer
589
155, 271, 544,
864
030
ProVision
Promax
595
466
Morgan’s
254, 524, 840
continued
Setting the Set-Top Box
27
Download from Www.Somanuals.com. All Manuals Search And Download.
STB brand
Prosat
Code numbers
STB brand
Code numbers
496
224
014
Sony
286, 289, 293,
650, 715
PTT Telecom
Stella
104
PVP Stereo
Visual Matrix
STVI
428
Pyxis
842
STS
167
Quadral
Radiola
Radix
RFT
373, 530, 639
211
Sunstar
Tandberg
Tantec
524, 805
742
407, 893, 764
211, 231, 552
308, 309, 347,
466
Tatung
156
Saba
265, 347, 364,
531, 586, 701,
720, 745
TechniSat
272, 273, 331,
420, 469, 552,
559, 596
Sabre
466
Teco
384
Sagem
Sakura
Salora
Samsung
SAT
831
Telecom
Telefunken
Teleka
104
377
432
119, 183, 210
283
254, 624, 683
435
Telemax
Teleservice
Televes
Tensai
332, 361, 362,
472
292
Satbox
386
596
Satcom
Satec
224
632
194, 339
283
Thomson
Thorens
Tonna
466, 864
597
Satmaster
SatPartner
343, 346, 432,
513, 531, 703,
720, 745
679
TPS
831
Triad
332, 344, 346,
361, 362
Schwaiger
194, 515
Scientific Atlanta 019, 028, 288
Triasat
Tristar
425
Seemann
SEG
407, 589, 637
277
380, 432, 529,
753
Tudi
297
Uniden
Unisat
205, 803, 842
Siemens
184
377
014
Skymaster
530, 639
United Cable
Setting the Set-Top Box
28
Download from Www.Somanuals.com. All Manuals Search And Download.
STB brand
Unitor
Code numbers
228, 343
184, 525, 582
344, 364, 529
211
STB brand
Winersat
Wisi
Code numbers
343
Universum
Vector
184, 332, 362,
383, 407, 417,
418, 426, 466,
647, 649, 701
Ventana
Videoway
VisiCable+
Vortec
Wolsey Gene
XSat
555
261
134, 900
900
492
Xcom
Multimedia
432
VTech
332, 473, 771
362, 701
116
Zehnder
332, 342, 531,
829
Vtech
Westminster
Wevasat
Zenith
011, 536
805
344
Zwergnase
Note
• To check if the brand number is entered correctly or not, press STB repeatedly to
display “STB” in the display window then enter a three digit STB channel number
with the programme number buttons. If the STB responds, you have enterred the
correct brand number.
Setting the Set-Top Box
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a language
If you prefer an on-screen language other than English, use the on-screen display to
select another language.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
Press MENU, then press M/m to
highlight SETTINGS and press OK.
SETTINGS
1
MENU
SET-TOP BOX
TUNER
CLOCK
LANGUAGE
RETURN
PLAY
OK
SELECT
SET
:
: OK
EXIT : MENU
Press M/m to highlight LANGUAGE,
then press OK.
LANGUAGE
2
ENGLISH
NEDERLANDS
DANSK / NORSK
SVENSKA
PLAY
OK
DEUTSCH
FRANÇAIS
ITALIANO
SUOMI
ESPAÑOL
PORTUGUÊS
SELECT
SET
:
: OK
EXIT : MENU
Press M/m/</, to highlight the desired language, then press OK.
3
4
PLAY
OK
Press MENU to exit the menu.
MENU
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you do not proceed for more than a few
minutes.
Selecting a language
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting channels
If some channels could not be preset using the Auto Set Up function, you can preset
them manually.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
Press MENU, then press M/m to
highlight SETTINGS and press OK.
SETTINGS
1
MENU
SET-TOP BOX
TUNER
CLOCK
LANGUAGE
RETURN
PLAY
OK
SELECT
SET
:
: OK
EXIT : MENU
Press M/m to highlight TUNER, then
press OK.
2
TUNER
PROG.
AAB
1
PLAY
OK
CHANNEL SET
AFT
C
2 1
ON
FINE TUNING
RETURN
SELECT
SET
:
: OK
EXIT : MENU
• PROG
Press PROG +/– to select the
programme position.
Selected programme
position
3
TUNER
PROG.
AAB
4
CHANNEL SET
AFT
C
2 1
ON
FINE TUNING
RETURN
SELECT
SET
:
: OK
EXIT : MENU
continued
Presetting channels
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to highlight CHANNEL
SET, then press OK.
TUNER
4
5
PROG.
2 1 AAB
4
CHANNEL SET
AFT
FINE TUNING
RETURN
C
PLAY
OK
SELECT
:
CONFIRM : OK
EXIT : MENU
Press M/m repeatedly until the channel you want is displayed.
The channels appear in the following
order:
PLAY
OK
TUNER
PROG.
4
CHANNEL SET
AFT
C
2 7
FINE TUNING
RETURN
• UHF B21 – B69
If you know the number of the channel
you want, press the programme
number buttons. For example, for
channel 5, first press “0” and then
press “5.”
1
4
7
2
5
8
0
3
6
9
SELECT
:
CONFIRM : OK
EXIT : MENU
To preset another programme position, repeat steps 3 through 5.
Press MENU to exit the menu.
6
7
MENU
Presetting channels
32
Download from Www.Somanuals.com. All Manuals Search And Download.
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. However, if the picture is not clear, you may also use the
manual tuning function.
Press PROG +/– or the programme number buttons to select the
programme position for which you cannot obtain a clear picture.
1
2 Press MENU, then select SETTINGS and press OK.
3 Select TUNER, then press OK.
4 Select FINE TUNING, then press OK.
The fine tuning meter appears.
TUNER
PROG.
4
Selected programme
position
CHANNEL SET
AFT
C
2 7
FINE TUNING
RETURN
SET
:
EXIT : MENU
5 Press </, to get a clearer picture, then press MENU to exit the menu.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Notes
• The menu disappears automatically if you do not proceed for more than a few
minutes.
• When adjusting FINE TUNING, the menu may become difficult to read due to
interference from the picture being received.
Presetting channels
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing/disabling programme positions
After setting the channels, you can change the programme positions as you like. If
any programme positions are unused or contain unwanted channels, you can disable
them.
You can also change the station names. If the station names are not displayed, you can
enter them manually.
Changing programme positions
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
Press MENU, then press M/m to
highlight LISTS and press OK.
LISTS
MENU
1
CHANNEL LIST
TIMER LIST
RETURN
PLAY
SELECT
SET
:
: OK
OK
EXIT : MENU
EXIT : MENU
EXIT : MENU
Press M/m to highlight CHANNEL
LIST, then press OK.
CHANNEL LIST
2
3
PROG
CH
NAME
AAB
PLAY
OK
1
2
3
4
5
C
C
C
C
C
2 1
3 3
5 6
2 7
3 9
CDE
FGH
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
CLEAR
Press M/m to highlight the row which
you want to change the programme
position, then press ,.
CHANNEL LIST
PROG
CH
NAME
AAB
CDE
PLAY
OK
1
2
3
4
5
C
C
C
C
C
2 1
3 3
5 6
2 7
3 9
To display other pages for programme
positions 6 to 60, press M/m
repeatedly.
FGH
SELECT
SET STATION NAME
CONFIRM
:
:
: OK
Changing/disabling programme positions
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m until the selected channel
row moves to the desired programme
position.
CHANNEL LIST
4
5
PROG
CH
NAME
CDE
PLAY
OK
1
2
3
4
5
C
C
C
C
C
3 3
5 6
2 1
2 7
3 9
AAB
FGH
The selected channel is inserted at the
new programme position and the
intermediate channels are displaced to
fill the gap.
SELECT
SET STATION NAME
CONFIRM
:
:
: OK
EXIT : MENU
Press OK to confirm the setting.
PLAY
OK
To change the programme position of another station, repeat steps 3
through 5.
6
7
Press MENU to exit the menu.
MENU
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you do not proceed for more than a few
minutes.
Disabling unwanted programme positions
After presetting channels, you can disable unused programme positions. The disabled
positions will be skipped later when you press the PROG +/– buttons.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
Press MENU, then press M/m to
highlight LISTS, and press OK.
LISTS
MENU
1
CHANNEL LIST
TIMER LIST
RETURN
PLAY
SELECT
SET
:
: OK
OK
EXIT : MENU
continued
Changing/disabling programme positions
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to highlight CHANNEL
LIST, then press OK.
CHANNEL LIST
2
3
4
PROG
CH
NAME
AAB
CDE
PLAY
OK
1
2
3
4
5
C
C
C
C
C
2 1
3 3
5 6
2 7
3 9
FGH
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
CLEAR
EXIT : MENU
EXIT : MENU
EXIT : MENU
Press M/m to highlight the row which
you want to disable.
CHANNEL LIST
PROG
CH
NAME
AAB
PLAY
OK
1
2
3
4
5
C
C
C
C
C
2 1
3 3
5 6
2 7
3 9
CDE
FGH
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
CLEAR
Press CLEAR.
CHANNEL LIST
CLEAR
The selected row will be cleared as
shown on the right.
PROG
CH
2 1
3 3
NAME
AAB
CDE
1
2
3
4
5
C
C
C
C
2 7
3 9
FGH
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
CLEAR
Repeat steps 3 and 4 for any other programme positions you want to
disable.
5
6
Press MENU to exit the menu.
MENU
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Notes
• The menu disappears automatically if you do not proceed for more than a few
minutes.
• Be sure to select the programme position you want to disable correctly. If you
disable a programme position by mistake, you need to reset that channel manually.
Changing/disabling programme positions
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the station names
You can change or enter the station names (up to 5 characters). The VCR must
receive channel information (for instance, SMARTLINK information) for station
names to appear automatically.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
Press MENU, then press M/m to
highlight LISTS and press OK.
LISTS
MENU
1
CHANNEL LIST
TIMER LIST
RETURN
PLAY
SELECT
SET
:
: OK
OK
EXIT : MENU
Press M/m to highlight CHANNEL
LIST, then press OK.
CHANNEL LIST
2
PROG
CH
NAME
AAB
CDE
PLAY
OK
1
2
3
4
5
C
C
C
C
C
2 1
3 3
5 6
2 7
3 9
FGH
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
CLEAR
EXIT : MENU
EXIT : MENU
EXIT : MENU
Press M/m to highlight the row which
you want to change or enter the station
name, then press ,.
CHANNEL LIST
3
4
PROG
CH
NAME
AAB
PLAY
OK
1
2
3
4
5
C
C
C
C
C
2 1
3 3
5 6
2 7
3 9
CDE
FGH
To display other pages for programme
positions 6 to 60, press M/m
repeatedly.
SELECT
:
:
SET STATION NAME
CONFIRM
: OK
Press ,.
CHANNEL LIST
PROG
CH
NAME
AAB
CDE
PLAY
OK
1
2
3
4
5
C
C
C
C
C
2 1
3 3
5 6
2 7
3 9
FGH
SELECT A CHARACTER
NEXT
:
:
CONFIRM
: OK
continued
Changing/disabling programme positions
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter the station name.
CHANNEL LIST
5
1 Press M/m to select a character.
Each time you press M, the
PROG
CH
NAME
CAB
CDE
PLAY
OK
1
2
3
4
5
C
C
C
C
C
2 1
3 3
5 6
2 7
3 9
character changes as shown below.
A t B t … t Z t a t b t …
t z t 0 t 1 t … t 9 t
(symbols) t (blank space) t A
FGH
SELECT A CHARACTER
NEXT
CONFIRM
:
:
: OK
EXIT : MENU
2 Press , to set the next character.
The next space is highlighted.
To correct a character, press </, until the character you want
to correct is highlighted, then reset it.
You can set up to 5 characters for the station name.
Press OK to confirm the new name.
Press MENU to exit the menu.
6
7
PLAY
OK
MENU
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Notes
• The menu disappears automatically if you do not proceed for more than a few
minutes.
• If you enter a symbol in step 5, it will appear as a blank space in the display
window.
Changing/disabling programme positions
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
You must set the time and date on the VCR to use the timer features properly. If the
VCR clock was not set in the Auto Set Up procedure, you need to set it manually.
The Auto Clock Set function works only if a station in your area is broadcasting a
time signal. If the Auto Set Up function did not set the clock correctly for your local
area, try another station for the Auto Clock Set function.
Setting the clock manually
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
Press MENU, then press M/m to
highlight SETTINGS and press OK.
MENU
SETTINGS
1
2
3
SET-TOP BOX
TUNER
CLOCK
LANGUAGE
RETURN
PLAY
OK
SELECT
SET
:
: OK
EXIT : MENU
Press M/m to highlight CLOCK, then
press OK.
CLOCK
PLAY
OK
AUTO ADJUST
OFF
CLOCK PROGRAM
MANUAL ADJUST
1 . 1 . 2 0 0 1
MON
0 : 0 0
SELECT
SET
:
: OK
EXIT : MENU
Press M/m to highlight MANUAL
ADJUST, then press OK.
CLOCK
PLAY
OK
AUTO ADJUST
OFF
CLOCK PROGRAM
MANUAL ADJUST
1
.
1 . 2 0 0 1
MON
0 : 0 0
SELECT
SET
:
:
CONFIRM : OK
EXIT : MENU
continued
Setting the clock
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Press M/m to set the day.
CLOCK
4
5
6
7
8
PLAY
OK
AUTO ADJUST
OFF
CLOCK PROGRAM
MANUAL ADJUST
2 8
.
1 . 2 0 0 1
SUN
FRI
FRI
FRI
0 : 0 0
SELECT
SET
:
:
CONFIRM : OK
EXIT : MENU
Press , to highlight the month and
set the month pressing M/m.
CLOCK
PLAY
OK
AUTO ADJUST
OFF
CLOCK PROGRAM
MANUAL ADJUST
2 8
.
9 . 2 0 0 1
0 : 0 0
SELECT
SET
:
:
CONFIRM : OK
EXIT : MENU
Set the year, hour, and minutes in
sequence, pressing , to highlight the
item to be set, and press M/m to select
the digits.
CLOCK
AUTO ADJUST
OFF
PLAY
OK
CLOCK PROGRAM
MANUAL ADJUST
2 8
.
9 . 2 0 0 1
1 8 : 0 0
The day of the week is set
automatically.
SELECT
SET
:
:
CONFIRM : OK
EXIT : MENU
Press OK to start the clock.
CLOCK
AUTO ADJUST
OFF
PLAY
OK
CLOCK PROGRAM
MANUAL ADJUST
2 8
.
9 . 2 0 0 1
1 8 : 0 0
SELECT
SET
:
: OK
EXIT : MENU
Press MENU to exit the menu.
MENU
Tips
• To change the digits while setting, press < to return to the item to be changed, and
select the digits by pressing M/m.
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you do not proceed for more than a few
minutes.
Setting the clock
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the station for the Auto Clock Set function
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
Press MENU, then press M/m to
highlight SETTINGS and press OK.
SETTINGS
1
2
3
4
MENU
SET-TOP BOX
TUNER
CLOCK
LANGUAGE
RETURN
PLAY
OK
SELECT
SET
:
: OK
EXIT : MENU
Press M/m to highlight CLOCK, then
press OK.
CLOCK
AUTO ADJUST
ON
1
PLAY
OK
CLOCK PROGRAM
MANUAL ADJUST
2 8 . 9 . 2 0 0 1
AAB
AUTO ADJUST is highlighted.
FRI
FRI
FRI
1 8 : 0 0
SELECT
SET
:
: OK
EXIT : MENU
Press OK.
CLOCK
AUTO ADJUST
ON
OFF
PLAY
OK
CLOCK PROGRAM
MANUAL ADJUST
2 8
.
9 . 2 0 0 1
1 8 : 0 0
SELECT
:
CONFIRM : OK
EXIT : MENU
Press M/m to highlight ON, then press
OK.
CLOCK
AUTO ADJUST
ON
1
PLAY
OK
CLOCK PROGRAM
MANUAL ADJUST
2 8 . 9 . 2 0 0 1
AAB
1 8 : 0 0
SELECT
SET
:
: OK
EXIT : MENU
continued
Setting the clock
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Press m to highlight CLOCK
PROGRAM, then press OK.
CLOCK
5
6
7
AUTO ADJUST
PLAY
OK
CLOCK PROGRAM
MANUAL ADJUST
1
AAB
2 8
.
9 . 2 0 0 1
FRI
1 8 : 0 0
SELECT
:
CONFIRM : OK
EXIT : MENU
Press M/m repeatedly until the
programme position of the station that
carries a time signal appears.
CLOCK
AUTO ADJUST
PLAY
OK
CLOCK PROGRAM
MANUAL ADJUST
2
CDE
2 8
.
9 . 2 0 0 1
FRI
1 8 : 0 0
If the VCR does not receive a time
signal from any station, AUTO
ADJUST returns to OFF
automatically.
SELECT
:
CONFIRM : OK
EXIT : MENU
Press MENU to exit the menu.
MENU
Tips
• If you set AUTO ADJUST to ON, the Auto Clock Set function is activated
whenever the VCR is turned off. The time is adjusted automatically by making
reference to the time signal from the station whose programme position is
displayed in the “CLOCK PROGRAM” row. If you do not need the Auto Clock
Set, select OFF.
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you do not proceed for more than a few
minutes.
Setting the clock
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting your personal code
For identification, you can enter a
personal code into the VCR. Once you
enter your personal code, you can
confirm it any time but can never
change it. Please make a note of the
code to quote to the police if your VCR
is stolen.
?/1
X
Before you start...
• Turn on your TV and set it to the video channel.
• If there is a tape in the VCR, remove it.
• Turn off the VCR.
Hold down X (pause) and ?/1 (on/
standby) on the VCR simultaneously
for more than three seconds.
SECURITY FUNCTION
1
2
PERSONAL CODE
– – – – – – – – – – –
SELECT
SET
:
:
CONFIRM : OK
EXIT : MENU
Enter your personal code.
SECURITY FUNCTION
1 Press M/m to select a character.
Each time you press M, the character
changes as shown below.
PLAY
OK
PERSONAL CODE
WB–1 5 7 8 – – – –
A t B t … t Z t 0 t 1 t …
t 9 t (blank space) t -
(hyphen) t A
SELECT
SET
:
:
CONFIRM : OK
EXIT : MENU
2 Press , to set the next character.
The next space is highlighted.
To correct a character, press </, until the character you want to
correct is highlighted, then reset it.
You can set up to 11 characters for your personal code.
Press OK.
A confirmation screen appears.
SECURITY FUNCTION
3
PLAY
OK
PERSONAL CODE
WB–1 5 7 8 – – – –
FINAL CONFIRM
CANCEL
: OK
CLEAR
:
EXIT : MENU
continued
Setting your personal code
43
Download from Www.Somanuals.com. All Manuals Search And Download.
If the displayed personal code is correct, press OK.
4
PLAY
OK
If the displayed personal code is wrong, press CLEAR and continue
from step 2.
CLEAR
To confirm your personal code
While the VCR is turned off and there is no tape in the VCR, hold down X
(pause) and ?/1 (on/standby) on the VCR simultaneously for more than
three seconds. The entered personal code appears on the TV screen. Press
any button to enter normal viewing mode.
Note
• The menu disappears automatically if you do not proceed for more than a few
minutes.
Setting your personal code
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Playing a tape
Before you start...
• Refer to “Index to parts and controls” for button locations.
Turn on your TV and set it to the video channel.
1
Insert a tape.
2
The VCR turns on and starts playing
automatically if you insert a tape with
its safety tab removed.
Press H PLAY.
3
When the tape reaches the end, it will rewind automatically.
PLAY
OK
Additional tasks
To
Press
Stop play
x STOP
Pause play
X PAUSE
Resume play after pause
Fast-forward the tape
Rewind the tape
Eject the tape
X PAUSE or H PLAY
M FF during stop
m REW during stop
Z EJECT
To use the time counter
Press CLEAR at the point on the tape that you want to find later. The
counter in the display window resets to “0:00:00.” Search for the point
afterwards by referring to the counter.
VIDEO
SP
OPC
To display the counter on the TV screen, press
DISPLAY.
continued
Playing a tape
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• The counter resets to “0:00:00” whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
• The time counter does not appear on the TV screen when using an NTSC-recorded
tape.
• Depending on your TV, the following may occur while playing an NTSC-recorded
tape:
–The picture becomes black and white.
–The picture shakes.
–No picture appears on the TV screen.
–Black streaks appear horizontally on the TV screen.
–The colour density increases or decreases.
• If you play back a tape in LP or EP mode with the NTSC system, the sound
becomes monaural.
• While setting the menu on the TV screen, buttons for playback on the remote
commander do not function.
Starting playback automatically with one button (One
Touch Play)
If you use the SMARTLINK connection, you can turn on the VCR and the
TV, set the TV to the video channel, and start playback automatically with
one button.
1 Insert a tape.
The VCR automatically turns on.
If you insert a tape with its safety tab removed, the TV turns on and
switches to the video channel. Playback starts automatically.
2 Press H PLAY.
The TV turns on and switches to the video channel automatically.
Playback starts.
Tip
• When there already is a tape in the VCR, the VCR and the TV turn on, the TV is
set to the video channel, and playback starts automatically in one sequence when
you press H PLAY.
Note
• When you use the One Touch Play function, leave the TV on or in the standby
mode.
Playing a tape
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes
Before you start...
• Refer to “Index to parts and controls” for button locations.
Turn on your TV and set it to the video channel.
1
Insert a tape with its safety tab in place.
2
• To record a normal channel, press PROG +/– until the programme
position number you want appears in the display window.
• PROG
3
VIDEO
SP
OPC
INPUT SELECT
• To record from a decoder or other source connected to one or
more of the LINE inputs, press INPUT SELECT until the
connected line appears in the display window.
VIDEO
SP
OPC
STB
1
4
7
2
5
8
0
3
6
9
• To record from the Set-Top Box, press STB. The STB indicator
lights up in the display window. Then enter a three digit STB
channel number with the programme number buttons.
VIDEO
SP
OPC
STB
Press SP/LP to select the tape speed, SP or LP.
SP / LP
4
LP (Long Play) provides recording time twice as long as SP.
However, SP (Standard Play) produces better picture and audio
quality.
VIDEO
LP OPC
continued
Recording TV programmes
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Press z REC to start recording.
REC
5
The recording indicator lights up red in the display window.
VIDEO
LP OPC
Recording indicator
To stop recording
Press x STOP.
To check the remaining time
Press
DISPLAY. With the display on, press COUNTER/REMAIN to
check the remaining time. Each time you press COUNTER/REMAIN, the
time counter and the remaining time appear alternately. The
indicates the remaining time.
indicator
SP
0 : 0 0 : 2 2
1 : 4 6
Time counter
Remaining time
In order to get an accurate remaining time indication, be sure TAPE
LENGTH in the OPTIONS-1 menu is set according to the tape type you use
To watch another TV programme while recording
Press t TV/VIDEO to turn off the VIDEO indicator in the display
window.
1
2 Select another programme position on the TV.
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on the
same tape again, cover the tab hole with
adhesive tape.
Safety tab
Recording TV programmes
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
• To select a programme position, you can use the programme number buttons on the
remote commander. For two-digit numbers, press the - (ten’s digit) button
followed by the programme number buttons.
• If you connect additional equipment to a LINE connector or jack, you can select
the input signal using the INPUT SELECT or PROG +/– buttons.
• The
DISPLAY information appears on the TV screen indicating information
about the tape, but the information will not be recorded on the tape.
• If you do not want to watch TV while recording, you can turn off the TV.
Notes
• The
motion playback.
DISPLAY information does not appear during still (pause) mode or slow-
DISPLAY information will not appear while playing an NTSC-recorded
• The
tape.
• If a tape has portions recorded in both PAL and NTSC systems, the time counter
reading will not be correct. This discrepancy is due to the difference between the
counting cycles of the two video systems.
• When you insert a non-standard commercially available tape, the remaining time
may not be correct.
• The remaining time is intended for rough measurement only.
• About 30 seconds after the tape begins playback, the tape remaining time will be
displayed.
• The station name may not appear if the VCR does not receive station name
information signals.
Recording what you are watching on the TV (TV Direct
Rec)
If you use the SMARTLINK connection, you can easily record what you are
watching on the TV (other than tapes being played on the VCR).
1 Insert a tape with its safety tab in place.
Press z REC while you are watching a TV programme or external
source.
2
The VCR automatically turns on, then the TV indicator lights up and the
VCR starts recording what you are watching on the TV.
continued
Recording TV programmes
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
• The TV indicator appears in the display window after you press z REC in some
situations such as:
–when you are watching a source connected to the TV’s line input, or
–when the TV tuner preset data for the programme position is different from the
data in the VCR tuner preset.
• If there is a tape with its safety tab in place in the VCR, the VCR automatically
turns on and starts recording what you are watching on the TV when you press
z REC.
• You can turn the TV Direct Rec function ON and OFF in the OPTIONS-2 menu
Notes
• You cannot record what you are watching using this method when the VCR is in
the following modes; pause, timer standby, tuner preset, Auto Set Up, and
recording.
• When the TV indicator is lit in the display window, do not turn off the TV nor
change the TV programme position. When the TV indicator is not lit, the VCR
continues recording the programme even if you change the TV programme
position on the TV.
Recording TV programmes
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes using the Dial
Timer
The Dial Timer function allows you to
x
make timer recordings of programmes
without turning on your TV. Set the
recording timer to record up to eight
programmes, including settings made with
other timer methods, that will be broadcast
within the next month. The recording start
time and recording stop time can be set at
one minute intervals.
?/1
DIAL TIMER
PROGRAM +/–
X
Before you start...
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording
time.
• Refer to “Index to parts and controls” for button locations.
Press
DIAL TIMER.
DIAL TIMER
1
“DATE” and “TODAY” appear alternately in the display window.
If the date and time are not set, “DAY” will appear. See step 2 in the
following section, “To set the clock” to set the date and time.
VIDEO
SP
OPC
VIDEO
SP
OPC
Turn
DIAL TIMER to set the recording date.
DIAL TIMER
2
VIDEO
SP
OPC
continued
Recording TV programmes using the Dial Timer
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Press
DIAL TIMER.
DIAL TIMER
3
“START” and the current time appear alternately in the display
window.
VIDEO
SP
OPC
VIDEO
SP
OPC
Turn
DIAL TIMER to set the recording start time.
DIAL TIMER
PROGRAM
4
5
You can set the recording start time in 15 minute intervals or adjust
the time in one minute intervals by pressing the PROGRAM +/–
buttons.
VIDEO
SP
OPC
Press
DIAL TIMER.
DIAL TIMER
“STOP” and the recording stop time appear alternately in the
display window.
VIDEO
SP
OPC
VIDEO
SP
OPC
Turn
DIAL TIMER to set the recording stop time.
DIAL TIMER
PROGRAM
6
You can set the recording stop time in 15 minute intervals or adjust
the time in one minute intervals by pressing the PROGRAM +/–
buttons.
VIDEO
SP
OPC
Recording TV programmes using the Dial Timer
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Press
DIAL TIMER.
DIAL TIMER
7
8
The programme position or station name appears in the display
window.
VIDEO
SP
OPC
Turn
DIAL TIMER to set the programme position.
DIAL TIMER
VIDEO
SP
OPC
To record from another source connected to one or more of the
LINE inputs, turn DIAL TIMER or press INPUT SELECT to
display the connected line in the display window.
INPUT SELECT
To record from the Set-Top Box, turn
DIAL TIMER or press
PROGRAM +/– until the STB channel number you want appears in
the display window. You can change the channel one channel at a
time by turning
DIAL TIMER, or 100 channels at a time by
pressing PROGRAM +/–.
Press
DIAL TIMER to complete the setting.
DIAL TIMER
9
“OK” appears in the display window for about five seconds.
The
indicator appears in the display window and the VCR stands
by for recording.
To record from another source, leave the connected equipment
switched on.
To return to the previous step
To return to the previous step, press the PROGRAM + and – buttons on the
VCR at the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press x STOP.
continued
Recording TV programmes using the Dial Timer
53
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The
indicator
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
To set the clock
DIAL TIMER so that “CLOCK” appears in the display window.
1 Turn
Press
DIAL TIMER.
“DAY” appears in the display window.
2
DIAL TIMER to set the day.
3 Turn
Press
DIAL TIMER.
“MONTH” appears in the display window.
4
Turn and press
DIAL TIMER to set the month, and then the year.
5
After you set the year, “CLOCK” appears in the display window again.
DIAL TIMER to set the hour and minute.
6 Turn and press
When you have finished setting the time, press
DIAL TIMER to start
7
the clock.
Tips
• To cancel a Dial Timer setting, press x (stop) on the VCR while you are making
the setting.
• The programme is recorded in the current tape speed mode. To change the tape
speed, press SP/LP before you complete the setting in step 9.
• When you are recording a programme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed
to the LP mode. Note that some interference will appear on the picture at the point
the tape speed is changed. If you want to keep the same tape speed, set AUTO
Recording TV programmes using the Dial Timer
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• If eight programmes have already been set using the VIDEO Plus+ system or the
TIMER menu, “FULL” appears in the display window for about five seconds.
• The
indicator flashes in the display window when you complete the setting in
step 9 with no tape inserted.
• If you set the clock using the Auto Clock Set function and AUTO ADJUST is set to
ON, the clock will adjust itself to the incoming time signal regardless of
adjustments made with the Dial Timer. Be sure you have set the Auto Clock Set
correctly.
• The station name may not appear if the VCR does not receive station name
information signals.
About the Demonstration Mode
The Dial Timer function has a Demonstration Mode that allows the user, such as a
salesperson, to enter more than eight examples of timer settings when demonstrating
the use of the Dial Timer. It cancels the FULL notice which appears if eight
programmes have already been set. Do not use the Demonstration Mode for making
timer recordings. Doing so may cause the settings to be inaccurate.
To activate the Demonstration Mode
Press X (pause) on the VCR while turning the
DIAL TIMER. “DEMO”
appears in the display window for a few seconds.
To cancel the Demonstration Mode
Turn the power off and unplug the mains lead. Although the Demonstration
Mode is cancelled, the timer settings entered while using the Demonstration
Mode will remain. Be sure to manually cancel the timer settings before you
use the Dial Timer or any other timer method after reconnecting the mains
Recording TV programmes using the Dial Timer
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes using the
VIDEO Plus+ system
The VIDEO Plus+ system is the feature that simplifies programming the VCR to
make timer recordings. Just enter the PlusCode number listed in the TV programme
guide. The date, times, and programme position of that programme are set
automatically. You can preset a total of eight programmes, including settings made
with other timer methods.
Before you start…
• Check that the VCR clock is set to the correct time and date.
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording
time.
• Turn on your TV and set it to the video channel.
84).
• Refer to “Index to parts and controls” for button locations.
Press TIMER.
TIMER
1
• When you set TIMER OPTIONS
TIMER METHOD
to VARIABLE:
The TIMER METHOD menu
STANDARD
VIDEO Plus+
PLAY
appears on the TV screen. Press
M/m to select VIDEO Plus+, then
OK
press OK.
SELECT
SET
:
: OK
EXIT : MENU
• When you set TIMER OPTIONS
to VIDEO Plus+:
The VIDEO Plus+ menu appears
on the TV screen.
VIDEO Plus+
2 8 . 9 FRI
PLUSCODE NO.
– – – – – – – – –
SET
:
0–9
EXIT : MENU
Press the programme number
buttons to enter the PlusCode
number.
VIDEO Plus+
1
4
7
2
5
8
0
3
6
9
2 8 . 9 FRI
2
PLUSCODE NO.
1 2 4 6 – – – – –
If you make a mistake, press
CLEAR and re-enter the correct
number.
SET
CONFIRM : OK
CANCEL CLEAR
:
0–9
CLEAR
:
EXIT : MENU
Recording TV programmes using the VIDEO Plus+ system
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Press OK.
TIMER
2 8 . 9 FRI
3
DATE
TIME
PROG.
3 5
The date, start and stop times,
programme position or station name,
tape speed, and VPS/PDC setting
appear on the TV screen.
PLAY
OK
TODAY
SP / LP
LIST
1 9 : 0 0 2 0 : 0 0
SP
VPS / PDC
OFF
SELECT
:
:
:
INPUT SELECT
SET
• If “– –” appears in the “PROG.”
(programme) column (this may
happen for local broadcasts), you
CANCEL
CLEAR
EXIT : MENU
STB
have to set the appropriate programme position manually.
Press M/m to select the desired programme position.
• To record from another source connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line
in the “PROG.” position.
• To record from the Set-Top Box, press STB to display “STB---” in
the “PROG.” position. Then, enter a three digit STB channel
number with the programme number buttons.
1
4
7
2
5
8
0
3
6
9
CLEAR
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
If you want to change the date, tape
speed, and the VPS/PDC setting:
TIMER
2 8 . 9 FRI
4
5
DATE
TODAY
TIME
PROG.
3 5
PLAY
OK
1 9 : 0 0 2 0 : 0 0
1 Press </, to highlight the item
SP / LP
LIST
SP
VPS / PDC
ON
you want to change.
2 Press M/m to reset it.
SELECT
:
:
:
SET
CANCEL
CLEAR
• To record the same programme
every day or the same day every
• To use the VPS/PDC function, set VPS/PDC to ON.
EXIT : MENU
Press MENU to exit the menu.
MENU
continued
Recording TV programmes using the VIDEO Plus+ system
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Press ?/1 to turn off the VCR.
6
The indicator appears in the display window and the VCR stands
by for recording.
To record from another source, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 4 above, press m to select the recording pattern. Each time you press
m, the indication changes as shown below. Press M to change the indication
in reverse order.
TODAY t SUN-SAT (Sunday to Saturday) t MON-SAT (Monday to
Saturday) t MON-FRI (Monday to Friday) t SAT (every Saturday) .....
t MON (every Monday) t SUN (every Sunday) t 1 month later t
(dates count down) t TOMORROW t TODAY
Timer recording with VPS/PDC signals
Some broadcast systems transmit VPS (Video Programme System) or PDC
(Programme Delivery Control) signals with their TV programmes. These
signals ensure that your timer recordings are made regardless of broadcast
delays, early starts, or broadcast interruptions (when the VPS or PDC
indicator in the display window is lit).
To use the VPS/PDC function, set VPS/PDC to ON in step 4 above. You can
also use the VPS/PDC function for a source connected to one or more of the
LINE inputs.
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The indicator
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
Recording TV programmes using the VIDEO Plus+ system
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the programme position with a two digit number, press - (ten’s digit)
button followed by the programme number buttons.
• To set the line input video source, you can also use the PROG +/– buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed
to the LP mode. Note that some interference will appear on the picture at the point
the tape speed is changed. If you want to keep the same tape speed, set AUTO
• To check, change, or cancel the programme setting, press </, to choose LIST,
Notes
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit
VPS/PDC signals, the VCR will start recording at the set time without using the
VPS/PDC function.
• The
indicator flashes in the display window when you press ?/1 with no tape
inserted.
• When you set TIMER OPTIONS to STANDARD in the OPTIONS-2 menu, the
VIDEO Plus+ menu does not appear on the TV screen. Select VIDEO Plus+ or
VARIABLE.
• The VPS/PDC function is automatically set to OFF for the timer recording of a
programme from your Set-Top Box.
• The station name may not appear if the VCR does not receive station name
information signals.
Recording TV programmes using the VIDEO Plus+ system
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes using the timer
You can preset a total of eight programmes, including settings made with other timer
methods.
Before you start…
• Check that the VCR clock is set to the correct time and date.
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording
time.
• Turn on your TV and set it to the video channel.
84).
• Refer to “Index to parts and controls” for button locations.
TIMER
Press TIMER.
1
• When you set TIMER OPTIONS
TIMER METHOD
to VARIABLE:
The TIMER METHOD menu
STANDARD
VIDEO Plus+
PLAY
appears on the TV screen. Press
M/m to select STANDARD, then
OK
press OK.
SELECT
SET
:
: OK
EXIT : MENU
2 8 . 9 FRI
• When you set TIMER OPTIONS
to STANDARD:
The TIMER menu appears on the
TIMER
DATE
TIME
PROG.
– –
TODAY
SP / LP
LIST
– – : – – – – : – –
SP
VPS / PDC
OFF
TV screen.
SELECT
:
:
:
SET
CANCEL
CLEAR
EXIT : MENU
Recording TV programmes using the timer
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the date, start and stop times,
programme position or station name,
tape speed, and VPS/PDC function:
TIMER
2 8 . 9 FRI
2
DATE
TIME
PROG.
3 5
PLAY
OK
TODAY
SP / LP
LIST
1 9 : 0 0 2 0 : 0 0
SP
VPS / PDC
OFF
1 Press , to highlight each item in
turn.
INPUT SELECT
SELECT
:
:
:
SET
2 Press M/m to set each item.
To correct a setting, press < to
return to that setting and reset.
CANCEL
CLEAR
EXIT : MENU
STB
• To record the same programme every day or the same day every
• To use the VPS/PDC function, set VPS/PDC to ON. For details
1
4
7
2
5
8
0
3
6
9
• To record from another source connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line
in the “PROG.” position.
• To record from the Set-Top Box, press STB to display “STB---” in
the “PROG.” position. Then, enter a three digit STB channel
number with the programme number buttons.
Press MENU to exit the menu.
3
4
MENU
Press ?/1 to turn off the VCR.
The indicator appears in the display window and the VCR stands
by for recording.
To record from another source, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 2 above, press m to select the recording pattern. Each time you press
m, the indication changes as shown below. Press M to change the indication
in reverse order.
TODAY t SUN-SAT (Sunday to Saturday) t MON-SAT (Monday to
Saturday) t MON-FRI (Monday to Friday) t SAT (every Saturday) .....
t MON (every Monday) t SUN (every Sunday) t 1 month later t
(dates count down) t TOMORROW t TODAY
continued
Recording TV programmes using the timer
61
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The indicator
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
Tips
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the programme position with a two digit number, press - (ten’s digit)
button followed by the programme number buttons.
• To set the line input video source, you can also use the PROG +/– buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed
to the LP mode. Note that some interference will appear on the picture at the point
the tape speed is changed. If you want to keep the same tape speed, set AUTO
• Even if you set TIMER OPTIONS to VIDEO Plus+ in the OPTIONS-2 menu, you
can set the timer manually. Press MENU to select TIMER, then go to step 2.
• To check, change, or cancel the programme setting, press </, to choose LIST,
Notes
• When setting the timer with VPS/PDC signals, enter the start and stop times
exactly as indicated in the TV programme guide. Otherwise, the VPS/PDC
function will not work.
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit
VPS/PDC signals, the VCR will start recording at the set time without using the
VPS/PDC function.
• The
indicator flashes in the display window when you press ?/1 with no tape
inserted.
• The VPS/PDC function is automatically set to OFF for the timer recording of a
programme from your Set-Top Box.
• The station name may not appear if the VCR does not receive station name
information signals.
Recording TV programmes using the timer
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Operations
Playing/searching at various speeds
Before you start…
• Refer to “Index to parts and controls” for button locations.
Playback options
Operation
View the picture during
fast-forward or rewind
During fast-forward, hold down M FF/M. During rewind,
hold down m REW/m.
Play at high speed
• During playback, press M FF or m REW on the remote
commander.
• During playback, hold down M FF/M or m REW/m.
When you release the button, normal playback resumes.
Play at twice the normal
speed
During playback, press ×2.
Play in slow motion
Play frame by frame
During playback, press y SLOW.
During pause, press M FF or m REW on the remote
commander. Hold down M FF or m REW to play one
frame each second.
Rewind and start play
During stop, press H (play) on the VCR while holding down
m on the VCR.
To resume normal playback
Press H PLAY.
Using the shuttle ring
JOG
With the shuttle ring, you can
operate a variety of playback
options. There are two ways for
using the shuttle ring, normal mode
and jog mode.
Shuttle ring
continued
Playing/searching at various speeds
63
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or anticlockwise.
Each change in the shuttle ring position changes the playback mode in the
following way.
Pause
Slow motion
Slow motion
in reverse
Normal speed
in reverse
Normal speed
(Initial speed)
Double speed
in reverse
Double speed
High speed
High speed in
reverse
To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enter the jog mode. The JOG button lights up. If you change to
the jog mode during any playback mode, playback pauses so you can see a
still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The
frame shift speed depends on the speed you turn the shuttle ring.
To resume normal mode, press JOG again. The JOG button turns off.
Tip
• Adjust the picture using the PROGRAM +/– buttons on the VCR if:
–Streaks appear while playing in slow motion.
–Bands appear at the top or bottom while pausing.
–The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
Notes
• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.
• If the playback mode mark does not appear on the TV screen, press
DISPLAY.
Playing/searching at various speeds
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the recording duration time
After you have started recording in the normal way, you can have the VCR stop
recording automatically after a specified duration.
Before you start…
• Refer to “Index to parts and controls” for button locations.
1 While recording, press z REC.
The indicator appears in the display window.
VIDEO
SP
OPC
2 Press z REC repeatedly to set the duration time.
Each press advances the time in increments of 30 minutes.
Normal recording
0:30
1:00
5:30
6:00
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
To extend the duration
Press z REC repeatedly to set a new duration time.
To cancel the duration
Press z REC repeatedly until the indicator disappears and the VCR
returns to the normal recording mode.
To stop recording
To stop the VCR while recording, press x STOP.
Note
• You cannot display the current tape time in the display window when setting the
recording duration time.
Setting the recording duration time
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Synchronized Recording
You can set the VCR to automatically record programmes from equipment
such as a Set-Top Box by connecting the equipment to the LINE-3 IN
connector. The connected equipment must have a timer function for this
feature to work.
When the connected equipment turns on, the VCR also automatically turns
on and starts recording a programme from LINE-3 IN.
How to connect for Synchronized Recording
Connect the LINE-3 IN connector of the VCR to the TV Scart connector of
the Set-Top Box. Then connect the LINE-1 (TV) connector to the TV.
Scart cable (not supplied)
Set-Top Box, etc.
TV Scart
connector
t LINE-3 IN
i LINE-1 (TV)
Scart cable (not supplied)
Scart (EURO-AV)
: Signal flow
Recording programmes using the
Synchronized Recording function
SYNCHRO REC
Before you start...
• Insert a tape with its safety tab in place. Make
sure the tape is longer than the total recording
time.
• Refer to “Index to parts and controls” for
button locations.
Synchronized Recording
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Press INPUT SELECT or PROG +/– to display “L3” in the display
window.
Set the timer on the connected equipment to the time of the programme
you want to record, then turn it off.
1
2
3 Press SP/LP to select the tape speed.
4 Hold down SYNCHRO REC for more than two seconds.
The SYNCHRO indicator appears in the display window and the VCR
stands by for recording.
The VCR automatically turns on and starts recording when it receives an
input signal from the connected equipment.
The VCR automatically stops recording when the tape reaches the end or
when the connected equipment stops transmitting an input signal.
To cancel the Synchronized Recording function
Press SYNCHRO REC. The SYNCHRO indicator disappears.
To stop recording
Press x STOP while recording.
Notes
• This function may not work with some types of Set-Top Box.
• Some TVs or other equipment with timer functions will automatically turn off if no
operation is performed within a certain amount of time. In this case, the
Synchronized Recording also stops automatically.
• When the connected equipment turns on while the SYNCHRO indicator is
appeared, recording starts automatically.
• If the settings for timer recording and Synchronized Recording overlap, the
programme that starts first has priority and the second programme starts recording
only after the first programme has finished.
• The Auto Clock Set function does not work while the VCR stands by for
Synchronized Recording.
Synchronized Recording
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking/changing/cancelling timer
settings
Before you start…
• Turn on your TV and set it to the video channel.
• Refer to “Index to parts and controls” for button locations.
1 Press ?/1 to turn on the VCR.
2 Press MENU, then press M/m to highlight LISTS and press OK.
Press M/m to highlight TIMER LIST, then
press OK:
TIMER LIST
2 8 .
PROG.
3 5
AAB
CDE
FGH
I J K
– –
9
FRI
VPS
PDC
3
DATE
TODAY
3 0 . 9
TIME
1 9 : 0 0 2 0 : 0 0
2 0 : 0 0 2 1 : 0 0
1 0 : 0 0 1 1 : 3 0
1 4 : 0 0 1 5 : 0 0
SP
LP
LP
LP
SP
–
VPS
PDC
2 . 1 0
• If you want to change or cancel a
setting, go on to the next step.
MON
–
FRI
SUN
6 : 3 0
7 : 0 0
– : – –
– – . – –
– : – –
RETURN
• If you do not need to change or cancel
the settings, press MENU, then turn off
the VCR to return to recording standby.
SELECT
SET
:
: OK
:
CANCEL
CLEAR
EXIT : MENU
2 8 . 9 FRI
Press M/m to select the setting you want
to change or cancel, then press OK.
TIMER
4
DATE
2 . 1 0
TIME
1 0 : 0 0 1 1 : 3 0
PROG.
CDE
The selected setting appears in the
TIMER menu.
SP / LP
LIST
LP
VPS / PDC
ON
SELECT
:
:
:
SET
CANCEL
CLEAR
EXIT : MENU
5 • To change the setting, press </, to highlight the item you want to
change, then press M/m to reset it.
• To cancel the setting, press CLEAR.
6 Press MENU to exit the menu.
If any settings remain, turn off the VCR to return to recording standby.
Checking/changing/cancelling timer settings
68
Download from Www.Somanuals.com. All Manuals Search And Download.
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes
start at the same time, the programme listed first in the menu has priority.
Programme 1
Programme 2
about 20 seconds
will be cut off
Programme 1
Programme 2
about 20 seconds will be cut off
Tip
• In step 6 above, you can check the TIMER LIST by selecting LIST and pressing
OK. Press MENU to exit the TIMER LIST.
Checking/changing/cancelling timer settings
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording stereo and bilingual
programmes
In NICAM system
This VCR receives and records stereo and bilingual programmes based on
the NICAM system (The NICAM indicator appears). When a stereo or
bilingual programme is received, the STEREO indicator appears in the
display window.
To record a NICAM programme, HIFI AUDIO in the OPTIONS-1 menu
page 84 for details.
To select the sound while recording
Press AUDIO MONITOR to select the sound you want.
Stereo programmes
To listen to
Stereo
On-screen display
STEREO
Display window
STEREO
Standard sound*
No indicator
No indicator
* Usually the mixed sound of left and right channels (monaural)
Bilingual programmes
To listen to
Main
On-screen display
MAIN
Display window
STEREO
Sub
SUB
STEREO
Main and sub
Standard sound*
MAIN/SUB
No indicator
STEREO
No indicator
* Usually the main sound (monaural)
Recording stereo and bilingual programmes
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the sound during playback
Press AUDIO MONITOR to select the sound you want.
To listen to
On-screen display
Display window
Stereo/main and sub
STEREO
STEREO
(left and right channels)
Left channel/main
Right channel/sub
Standard sound
LCH
STEREO
RCH
STEREO
No indicator
No indicator
How sound is recorded on a video tape
The VCR records sound onto two separate tracks. Hi-fi audio is recorded
onto the main track along with the picture. Monaural sound is recorded onto
the normal audio track along the edge of the tape.
Stereo
Bilingual
Usually mixed
Usually main sound
left/right channels
Normal audio track
(monaural)
Hi-fi audio track
(main track)
Stereo sound
(left/right channels)
Main (left channel)
Sub (right channel)
Notes
• To listen to playback sounds in stereo, you must use the Scart or AUDIO OUT
connections.
• When you play a tape recorded in monaural, the sound is heard in monaural
regardless of the AUDIO MONITOR setting.
• If the AUDIO MONITOR button does not function, check that AUDIO MIX in the
Recording stereo and bilingual programmes
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching using the Smart Search
function
If you record multiple programmes on a tape, you can use the Smart Search function
to see what has been recorded on your tape. You can see information such as date,
time, and programme position of the programmes recorded. You can also start
playback directly from the selected programme using the SMART SEARCH screen.
All programmes are listed on the screen, regardless of how the programme was
recorded.
cleared.
Before you start…
• Turn on your TV and set it to the video channel.
• Refer to “Index to parts and controls” for button locations.
After recording, press ?/1 to turn on the
VCR.
1
2 Press SMART SEARCH.
SMART SEARCH
1 8 0 MIN.
PROG.
3 5
FGH
AAB
I J K
DATE
2 8 . 9
2 9 . 9
3 0 . 9
1 . 1 0
TIME
1 9 : 0 0 2 0 : 0 0
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
Press M/m/</, to select the programme
3
you want to start viewing.
6 : 3 0
7 : 0 0
BLANK TIME
3 0 MIN.
SELECT
SET
:
: OK
SAVE
:
SMART SEARCH
4 Press OK.
SMART SEARCH
1 8 0 MIN.
The VCR starts searching, and playback
starts automatically from the beginning of
NOW SEARCHING
the selected programme.
To stop searching
Press x STOP.
To exit the SMART SEARCH screen
Press MENU.
Searching using the Smart Search function
72
Download from Www.Somanuals.com. All Manuals Search And Download.
To record in a blank space
SMART SEARCH
1 8 0 MIN.
PROG.
FGH
Blank space on the tape will appear as a blank
row in the SMART SEARCH screen. Select
the last blank row in step 3, then press OK.
The VCR rewinds/fast-forwards the tape to
the beginning of the blank space, then stops.
Start recording. Note that “BLANK TIME”
and the remaining time indication only refers
to the length of the last blank space.
DATE
TIME
2 9 . 9
3 0 . 9
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
AAB
1 . 1 0
6 : 3 0
7 : 0 0
I J K
BLANK TIME
3 0 MIN.
SELECT
SET
:
: OK
SAVE
:
SMART SEARCH
Tips
• You can store information for up to 24 programmes on a single list.
• While recording, you can display the SMART SEARCH screen using the SMART
SEARCH button. If you decide to stop recording, press MENU to make the
SMART SEARCH screen disappear first. Then press x STOP.
• You can have the player recall the data of the last cassette used to record
Notes
• You cannot use this function unless the clock is set.
• Depending on the tape, the total or remaining time may not appear correctly.
• If many short programmes are recorded on a tape, multiple programmes may be
included in a single block. In this case, only the latest programme information will
appear in the SMART SEARCH screen.
• Blank time is measured from the end of the last recorded programme to the end of
the tape. However, if you eject the tape and then make a new recording on the
same tape, the original recorded programme(s) is displayed as a blank space.
• The station name may not appear if the VCR does not receive station name
information signals.
• If you start recording a programme “D” from the middle of a previously recorded
programme “A” and into another previously recorded programme “B,” the Smart
Search information for the second programme “B,” which is recorded over, is
deleted.
Originally recorded programmes
A
B
C
Recording the programme “D” over the programme “A” and “B”
A
D
C
Searching using the Smart Search function
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing, searching and deleting
programme information (Smart Search
Plus)
You can store programme information, such as the recording date and time, and
programme position, for a maximum of four tapes. You can select a programme and
start playback, by recalling the information directly from the Smart Search Plus
screen.
Storing the programme information
You can store programme information for a maximum of four tapes. Before recording
a programme, select a memory bank number from the list on the SMART SEARCH
screen.
The unit will not memorize the memory bank number for each cassette. Note the
number you assigned to each cassette.
Before you start...
• Turn on your TV and set it to the video channel.
• Refer to “Index to parts and controls” for button locations.
1 Insert a cassette for recording.
The VCR automatically turns on.
2 Press SMART SEARCH.
SMART SEARCH -RECALL-
RECALL
1
2
3
4
The SMART SEARCH -RECALL-
screen appears.
DATE
2 9 . 9
3 0 . 9
1 . 1 0
TIME
PROG.
FGH
AAB
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
6 : 3 0
7 : 0 0
I J K
RECALL is highlighted and the data for
the last cassette used to record
programmes appears.
SELECT
SET
:
: OK
EXIT
: SMART SEARCH
Press </, to select a memory bank
number.
SMART SEARCH -RECALL-
3
RECALL
DATE
1
2
TIME
3
4
PROG.
Note the memory bank number on the
cassette.
NO DATA
To cancel the process, press SMART
SEARCH.
SELECT
SET
:
: OK
EXIT
: SMART SEARCH
4 Press OK.
5 Start recording.
The information about the recorded programme will be stored on the
selected memory number.
Storing, searching and deleting programme information (Smart Search Plus)
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
• The SMART SEARCH screen will not appear before recording starts and
programme information is stored, even if you press SMART SEARCH.
To assign a memory number after recording
After recording a programme, you can store the programme information as a new
memory before ejecting the cassette. However, you cannot add the memory on the
existed memory bank number. To store the memory as additional, select the memory
bank number before.
1 Press ?/1 to turn on the VCR.
2 Press SMART SEARCH.
SMART SEARCH
1 8 0 MIN.
PROG.
FGH
AAB
I J K
DATE
2 9 . 9
3 0 . 9
1 . 1 0
TIME
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
6 : 3 0
7 : 0 0
BLANK TIME
3 0 MIN.
SELECT
SET
:
: OK
SAVE
:
SMART SEARCH
3 Press SMART SEARCH again.
The SMART SEARCH -SAVE- screen
appears.
SMART SEARCH -SAVE-
CANCEL
1
2
3
4
DATE
2 9 . 9
3 0 . 9
1 . 1 0
TIME
PROG.
FGH
AAB
I J K
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
6 : 3 0
7 : 0 0
SELECT
SET
:
: OK
EXIT
:
SMART SEARCH
Press </, to select a memory bank
number.
SMART SEARCH -SAVE-
4
CANCEL
1
2
3
4
DATE
2 9 . 9
3 0 . 9
1 . 1 0
TIME
PROG.
FGH
AAB
I J K
Select the memory bank number with no
information or the memory bank number
to be deleted.
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
6 : 3 0
7 : 0 0
SELECT
SET
:
: OK
To cancel the process, select CANCEL.
EXIT
:
SMART SEARCH
5 Press OK.
To exit the SMART SEARCH screen
Press SMART SEARCH.
Note
• If you select a number that is already contains programmes, the old programme
information is cleared and the new programme information is stored.
continued
Storing, searching and deleting programme information (Smart Search Plus)
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for programme information stored on the memory bank
number
You can start playback of the recorded programme after calling the programme
information from the four memory bank numbers.
Before you start...
• Turn on your TV and set it to the video channel.
1 Insert the cassette for which you want to use the memory bank number.
The VCR automatically turns on.
2 Press SMART SEARCH.
SMART SEARCH -RECALL-
RECALL
1
2
3
4
The SMART SEARCH -RECALL-
screen appears.
DATE
2 . 1 0
4 . 1 0
TIME
1 8 : 0 0 1 9 : 0 0
2 1 : 3 0 2 3 : 0 0
PROG.
CDE
I J K
SELECT
SET
:
: OK
EXIT
:
SMART SEARCH
Press </, to select the memory bank
number for the inserted cassette.
SMART SEARCH -RECALL-
3
RECALL
1
2
3
4
DATE
2 9 . 9
3 0 . 9
1 . 1 0
TIME
PROG.
FGH
AAB
I J K
The programme information contained in
the selected memory bank number
appears.
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
6 : 3 0
7 : 0 0
SELECT
:
SET
: OK
When you selected wrong memory bank
number, eject the cassette and repeat steps
from step 1.
ERASE
:
CLEAR
EXIT
:
SMART SEARCH
4 Press OK.
Memory bank number
The selected memory bank number
appears on the SMART SEARCH screen.
SMART SEARCH
1 8 0 MIN.
PROG.
FGH
2
DATE
TIME
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
2 9 . 9
3 0 . 9
AAB
1 . 1 0
6 : 3 0
7 : 0 0
I J K
BLANK TIME
3 0 MIN.
SELECT
SET
:
: OK
EXIT
:
SMART SEARCH
5 Press M/m/</, to select the programme you want to start viewing.
6 Press OK.
The VCR starts searching, and playback starts automatically from the
beginning of the selected programme.
To stop searching
Press x STOP.
Storing, searching and deleting programme information (Smart Search Plus)
76
Download from Www.Somanuals.com. All Manuals Search And Download.
To exit the SMART SEARCH screen
Press SMART SEARCH.
Recalling the most recent programme information
Programme information that is not saved in one of the memory bank
numbers is erased when the cassette is ejected. The RECALL memory bank
will temporarily memorize the programme information of the last tape used
for recording in case that it is accidentally ejected.
If you re-insert the cassette in step 1 that you accidentally ejected and then
select RECALL in step 3, the data for the last tape used to record
programmes appears. Press OK and the latest information will appear on the
SMART SEARCH screen. You can then add new information to this
programme list. For an explanation about viewing programme information
If you want to erase the latest information in the RECALL memory bank,
press the SMART SEARCH button instead of the OK button in step 3 and
then close the SMART SEARCH screen. The new information will replace
all of the current information in the RECALL memory bank.
Notes
• When you insert the cassette whose information does not exist on the memory
bank number, you can not search the recorded programme.
• If you exit the SMART SEARCH screen with a memory bank number that does not
contain programme information selected, the SMART SEARCH screen will not
appear even if you press SMART SEARCH.
Deleting the programme information
You can delete the programme information stored in a memory number.
Before you start...
• Turn on your TV and the VCR.
• Set the TV to the video channel.
1 Press SMART SEARCH.
SMART SEARCH -RECALL-
RECALL
1
2
3
4
The SMART SEARCH -RECALL-
screen appears.
DATE
2 . 1 0
4 . 1 0
TIME
1 8 : 0 0 1 9 : 0 0
2 1 : 3 0 2 3 : 0 0
PROG.
CDE
I J K
SELECT
SET
:
: OK
EXIT
:
SMART SEARCH
continued
Storing, searching and deleting programme information (Smart Search Plus)
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Press </, to select the memory bank
number to delete.
SMART SEARCH -RECALL-
2
RECALL
1
2
3
4
DATE
2 9 . 9
3 0 . 9
1 . 1 0
TIME
PROG.
FGH
AAB
I J K
The programme information on the
selected memory bank number appears.
Check the information that you want to
delete.
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
6 : 3 0
7 : 0 0
SELECT
:
SET
: OK
ERASE
:
CLEAR
EXIT
: SMART SEARCH
3 Press CLEAR.
SMART SEARCH -RECALL-
RECALL
DATE
1
2
TIME
3
4
The programme information is deleted.
PROG.
NO DATA
SELECT
SET
:
: OK
EXIT
: SMART SEARCH
4 Press SMART SEARCH.
The SMART SEARCH screen disappears.
Note
• You cannot use or return the deleted information.
About the Demonstration Mode
The Smart Search Plus function has a Demonstration Mode that allows the user, such
as a salesperson, to automatically display the Smart Search Plus screens.
To activate the Demonstration Mode
While the VCR is turned on, press and hold the both x (stop) and A (eject)
buttons on the VCR for a few seconds. The demonstration will start and the
four kinds of Smart Search Plus screens will be displayed repeatedly. If you
operate the VCR, the Demonstration Mode temporarily stops. After about
five minutes, the demonstration will restart.
To cancel the Demonstration Mode
While the VCR is turned off, press and hold the both x (stop) and A (eject)
buttons on the VCR for a few seconds. You can also cancel the
Demonstration Mode if you turn the power off and unplug the mains lead.
Storing, searching and deleting programme information (Smart Search Plus)
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching using the index function
The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
1 Insert an indexed tape into the VCR.
2 Press ./> INDEX SEARCH.
• To search ahead, press > INDEX
INDEX
SEARCH.
SEARCH
• To search backwards, press .
INDEX SEARCH.
The VCR starts searching, and playback
starts automatically from that point.
To stop searching
Press x STOP.
Notes
• No index signal will be added when recording starts from recording pause.
However, an index signal will be marked if you change the programme position
during recording pause.
• When you press . INDEX SEARCH, if there is nothing recorded before the
selected index signal, playback may not start exactly at the index signal.
Searching using the index function
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape (the
indicator flashes in the display window, then
turns off), distortion may occur if the
recording is in poor condition. In this case,
manually adjust the tracking.
TRACKING
During playback, press PROGRAM +/– on
the VCR to display the tracking meter. The
distortion should disappear as you press one
of the two buttons (the indicator lights up).
Tracking meter
To resume automatic tracking adjustments, eject the tape and re-insert it.
About the Reality Regenerator (RR) function
The Reality Regenerator (RR) function automatically restores the picture to
its original quality during playback.
To use the Reality Regenerator (RR) function
1 Press MENU, then select OPTIONS and press OK.
2 Press M/m to highlight OPTIONS-2 then press OK.
Press M/m to highlight RR, then press
OK.
OPTIONS - 2
3
TIMER OPTIONS
POWER SAVE
TV DIRECT REC
RR
VARIABLE
OFF
NORMAL
HIGH
OFF
RETURN
SELECT
:
CONFIRM : OK
EXIT : MENU
4 Press M/m to set RR to NORMAL or HIGH, then press OK.
The RR indicator lights up in the display window.
5 Press MENU to return to the original screen.
To turn it off, select OFF in step 3. The RR indicator turns off in the display
window.
Adjusting the picture
80
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Optimum Picture Control (OPC) function
The Optimum Picture Control (OPC)
OPTIONS - 1
function automatically improves recording
and playback quality by adjusting the VCR to
the condition of the video heads and tape. To
maintain better picture quality, we
OPC
ON
EDIT
OFF
AUDIO MIX
HIFI AUDIO
AUTO LONG PLAY
TAPE LENGTH
RETURN
OFF
NICAM
OFF
E1 8 0
recommend that you set OPC to ON in the
SELECT
SET
:
: OK
OPTIONS-1 menu (the OPC indicator lights
EXIT : MENU
OPC playback
The OPC function automatically works on all types of tapes, including rental
tapes and tapes that were not recorded with OPC.
OPC recording
Whenever you insert a tape and start recording for the first time, the VCR
adjusts to the tape using the OPC function (the OPC indicator flashes
rapidly). This adjustment is retained until the tape is ejected.
To deactivate the OPC function
Set OPC to OFF in the OPTIONS-1 menu. The OPC indicator in the display
window turns off.
Tip
• To set tracking to the centre position, press the PROGRAM + and – buttons on the
VCR at the same time.
Notes
• You can adjust the tracking for an NTSC-recorded tape but the tracking meter will
not be displayed.
• With the Auto Long Play function on, the OPC function will work only in SP
mode. If the tape speed automatically switches from SP to LP, the OPC function
turns off. If, however, the entire programme is recorded in LP mode, the OPC
function will work.
• There is a delay of about ten seconds before the VCR actually starts recording
while the VCR analyses the tape. To avoid the delay, first set the VCR to recording
pause (the OPC indicator flashes slowly) and press z REC to have the VCR
analyse the tape (the OPC indicator flashes rapidly) and return to recording pause.
After the OPC indicator stops flashing, press X PAUSE to start recording
immediately.
If you want to start recording quickly without using the OPC function, first set the
VCR to recording pause (the OPC indicator flashes slowly) and press X PAUSE
again to start recording.
Adjusting the picture
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Reducing the VCR’s power consumption
You can turn off the indicators in the display window when the VCR is off (standby
mode) to reduce the VCR’s power consumption.
1 Press MENU, then select OPTIONS and press OK.
2 Press M/m to highlight OPTIONS-2, then press OK.
Press M/m to select POWER SAVE, then
press OK.
OPTIONS - 2
3
TIMER OPTIONS
POWER SAVE
TV DIRECT REC
RR
FULL
PARTIAL
OFF
RETURN
SELECT
:
CONFIRM : OK
EXIT : MENU
4 Press M/m to highlight the option, then press OK.
• FULL to reduce the power consumption to a minimum
• PARTIAL to reduce the power consumption
5 Press MENU to return to the original screen.
To turn on the indicators in the display window
Set POWER SAVE to OFF in step 4.
Notes
• When the VCR stands by for recording, the indicators in the display window
remain lit even when POWER SAVE is set to FULL or PARTIAL.
• If POWER SAVE is set to FULL, you cannot watch or record programmes from
Reducing the VCR’s power consumption
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing menu options
Press MENU, then select OPTIONS and
press OK.
OPTIONS
1
OPTIONS - 1
OPTIONS - 2
RETURN
SELECT
SET
:
: OK
EXIT : MENU
2 Press M/m to highlight OPTIONS-1 or OPTIONS-2, then press OK.
OPTIONS - 1
OPTIONS - 2
OPC
EDIT
ON
TIMER OPTIONS
POWER SAVE
TV DIRECT REC
RR
VARIABLE
OFF
OFF
AUDIO MIX
OFF
ON
HIFI AUDIO
NICAM
OFF
NORMAL
AUTO LONG PLAY
TAPE LENGTH
RETURN
RETURN
E1 8 0
SELECT
SET
:
SELECT
SET
:
: OK
: OK
EXIT : MENU
EXIT : MENU
3 Press M/m to select the option, then press OK.
4 Press M/m to change the setting, then press OK.
5 Press MENU to return to the original screen.
Menu choices
Initial settings are indicated in bold print.
OPTIONS-1
Menu option
Set this option to
OPC
• ON to switch on the OPC (Optimum Picture Control)
function and improve picture quality.
• OFF to switch off OPC.
EDIT
• ON to minimize picture deterioration when editing.
• OFF to turn off EDIT.
AUDIO MIX
• ON to listen to the hi-fi and normal audio tracks at the
same time. The AUDIO MONITOR button will not
function.
• OFF to listen to the hi-fi and normal audio tracks
separately. Select the sound using the AUDIO
MONITOR button.
If you press Z EJECT, AUDIO MIX will be reset to OFF.
continued
Changing menu options
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu option
Set this option to
• NICAM to record NICAM broadcasts on the hi-fi audio
HIFI AUDIO
track.
• STANDARD to record standard sound on the hi-fi audio
track.
AUTO LONG PLAY • ON to change the timer recording tape speed
automatically to the LP mode when the remaining tape
length becomes shorter than the recording time. Note
that for AUTO LONG PLAY to work correctly, the
TAPE LENGTH setting must be accurate.
• OFF to keep the set tape speed.
TAPE LENGTH
• E180 to use an E-180 or shorter type tape.
• E195 to use an E-195 type tape.
• E240 to use an E-240 type tape.
• E300 to use an E-300 type tape.
OPTIONS-2
Menu option
TIMER OPTIONS
Set this option to
• VARIABLE to display the TIMER METHOD menu for
selecting STANDARD or VIDEO Plus+ when pressing
the
• STANDARD to display the TIMER menu when pressing
the TIMER button.
• VIDEO Plus+ to display the VIDEO Plus+ menu when
pressing the TIMER button.
TIMER button.
• FULL to turn off the indicators in the display window
during standby mode to reduce the VCR’s power
PARTIAL or OFF.
POWER SAVE
• PARTIAL to turn off the indicators in the display
window to conserve the VCR’s power.
• OFF to turn on the indicators in the display window
while the VCR is standing by.
• ON to activate the TV Direct Rec function.
• OFF to deactivate it.
TV DIRECT REC
RR
• NORMAL for normal everyday use.
• HIGH for well-used video tapes such as rented tapes.
Select this option when NORMAL does not improve the
picture quality.
• OFF to switch off the RR function.
Changing menu options
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• When the VCR stands by for recording, the indicators in the display window
remain lit even when POWER SAVE is set to FULL or PARTIAL.
• With the EDIT option ON, the OPC function does not work.
Changing menu options
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Connecting to a VCR or stereo system
How to connect to record on this VCR
Connect the line outputs of the other VCR to the LINE IN connector or jacks
of this VCR. Refer to the examples A through C and choose the connection
that best suits your VCR.
Example A
Your VCR (Recorder)
TV
i LINE-1 (TV)
Other VCR (Player)
Scart
(EURO-AV)
VMC-2121HG Scart cable (not supplied)
: Signal flow
Example B
Your VCR (Recorder)
TV
t LINE-2 L o R
(open cover to connect)
LINE OUT
VMC-820HG audio/video cable (not supplied)
: Signal flow
Other VCR (Player)
Connecting to a VCR or stereo system
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Example C
Your VCR (Recorder)
TV
t LINE-3 IN
Other VCR (Player)
Scart
(EURO-AV)
VMC-2121HG Scart cable (not supplied)
: Signal flow
How to connect to a stereo system
Connect the t LINE-2 L o R jacks on this VCR to the audio output jacks
on the stereo system, using the RK-C510HG audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other
VCR, select the input correctly to prevent a humming noise.
• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-
2106HG cable instead and connect the cable to the line out jacks of the other VCR.
Connecting to a VCR or stereo system
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic editing
When recording on this VCR
Before you start editing
REC z
• Turn on your TV and set it to the video
channel.
• Press INPUT SELECT to display the
connected line in the display window.
• Press SP/LP to select the tape speed, SP or LP.
• On this VCR, set EDIT to ON in the
OPTIONS-1 menu. If the other VCR has a
similar function, turn it on as well.
X
Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press X (pause) to set it to
playback pause.
1
2
3 Press REC z on this VCR to set it to recording pause.
To start editing, press the X (pause) buttons on both VCRs at the same
time.
4
To stop editing
Press the x (stop) buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press X (pause) on this VCR when an
unwanted scene begins. When it ends, press X (pause) again to resume recording.
Note
• If you start editing following the procedure above, the VCR will not start recording
with the OPC function. To record a tape with the OPC function, press REC z
again during recording pause in step 3 so the VCR analyses the tape. Then, press
X (pause) after the OPC indicator stops flashing to start recording. If you press X
(pause) before the OPC indicator stops flashing, the OPC function is cancelled.
Basic editing
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio dubbing
This feature lets you record over the normal
audio track. The monaural sound previously
recorded is replaced while the original hi-fi
sound remains unchanged. Use this feature
to add commentary to a tape that you have
recorded with a camcorder.
AUDIO DUB
X
t LINE-2 L o R
Before you start...
• Open the t LINE-2 L o R jacks cover on the front panel and connect a playback source.
• Turn on the TV and set it to the video channel.
Insert a source tape into your stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.
Insert a prerecorded tape with its safety tab in place into this (recording)
VCR. Search for the start of the section to be replaced and press
1
2
X (pause).
The VCR enters pause mode.
3 Press AUDIO DUB.
The programme position changes to “L2,” and the indicator appears in
the display window.
To start editing, press the X (pause) buttons on this VCR and the stereo
system (or other VCR) at the same time.
4
After you use this feature, the audio in playback mode is automatically
set to monaural.
To stop editing
Press x (stop) on this VCR and the stereo system (or other VCR).
To listen to both the hi-fi and normal audio
feature to listen to dubbed audio over the original hi-fi audio. When AUDIO
MIX is set to ON, the AUDIO MONITOR button does not function.
Remember to reset AUDIO MIX to OFF after playing the tape.
Note
• If you eject the tape or turn the VCR off, AUDIO MIX is automatically set to OFF.
Audio dubbing
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest
Sony service facility.
Symptom
Remedy
The ?/1 (on/standby)
• Connect the mains lead to the mains securely.
switch does not function.
The power is turned on
but the VCR does not
operate.
• Moisture condensation has occurred. Turn the power off,
unplug the mains lead and leave the VCR to dry for over
three hours.
The VCR is plugged in
but the display window
remains dark.
page 82).
The clock has stopped
and “–:– –” appears in
the display window.
• The clock stops if the VCR is disconnected from the mains
for more than one hour. Reset the clock (and timer).
The playback picture
does not appear on the
TV screen.
• Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
• If the VCR is connected to the TV with the Scart cable,
make sure the VIDEO indicator is lit in the display
window. Use the t TV/VIDEO button on the remote
commander to light up the VIDEO indicator.
The picture is not clear.
• If your TV is connected to the VCR with both Scart and
aerial cables, make sure the RF channel is set to OFF (see
page 22).
• Existing broadcasts may interfere with the VCR. Reset the
RF channel output of your VCR.
• Adjust the tracking with the PROGRAM +/– buttons on the
VCR.
• The video heads are dirty (see the last page of
Troubleshooting). Clean the video heads using the Sony T-
25CLD, E-25CLDR, or T-25CLW video head cleaning
cassette. If these cleaning cassettes are not available in
your area, have the heads cleaned at your nearest Sony
service facility (a standard service charge will be required).
Do not use a commercially available liquid type cleaning
cassette other than Sony’s, as it may damage the video
heads.
• The video heads may have to be replaced. Consult your
local Sony service facility for more information.
The picture rolls
vertically during picture
search.
• Adjust the vertical hold control on the TV or monitor.
Troubleshooting
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
The picture has no
sound.
• The tape is defective.
• If you made A/V connections, check the audio cable
connection.
The sound is unstable or • When you play a tape with the same sound recorded on
has an echo.
both the hi-fi and normal audio tracks, make sure AUDIO
MIX in the OPTIONS-1 menu is set to OFF (see page 83).
The sound from a tape
recorded with the VCR is
not in stereo or the
STEREO indicator in the
display window is
flashing.
• Adjust the tracking.
• The video heads are dirty. Clean the video heads using the
Sony T-25CLD, E-25CLDR, or T-25CLW video head
cleaning cassette as explained above.
No TV programme
appears on the TV
screen.
• Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
• If your TV is connected to the VCR with both Scart and
aerial cables, make sure the RF channel is set to OFF (see
page 22).
• Existing broadcasts may interfere with the VCR. Reset the
RF channel output of your VCR.
• Select the correct source with the INPUT SELECT button.
Select a programme position when recording TV
programmes; select a line input when recording from other
equipment.
TV reception is poor.
• Make sure the aerial cable is connected securely.
• Adjust the TV aerial.
The tape starts playing as • The safety tab has been removed. To record on this tape,
The tape is ejected when • The safety tab has been removed. To record on this tape,
you press z REC.
Nothing happens when
• Make sure the tape is not at its end.
you press z REC.
The timer does not
operate.
• Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer recording.
• Make sure your timer settings are past the current time.
• Check that Set-Top Box is turned on.
• The clock stops if the VCR is disconnected from the mains
for more than one hour. Reset the clock and timer.
• Turn the power off and unplug the mains lead.
continued
Troubleshooting
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
The VIDEO Plus+ menu • Check that TIMER OPTIONS in the OPTIONS-2 menu is
or the TIMER menu does
not appear.
set correctly (see page 84).
The VPS/PDC function
does not operate
properly.
• Check that the clock and the date are set correctly.
• Check that the VPS/PDC time you set is the correct one
(there might be a mistake in the TV programme guide). If
the broadcast you wanted to record did not send the good
VPS/PDC information, the VCR will not start recording.
• If the reception is poor, the VPS/PDC signal might be
altered and the VCR might not start recording.
The SYNCHRO REC
button turns off while
recording or does not go
back to recording
• The tape has reached its end. Insert a new tape and press
SYNCHRO REC again.
standby mode.
The Synchronized
Recording function does
not work.
• The connected equipment was not turned off.
Turn off the connected equipment and press SYNCHRO
REC again.
• There was a power failure. Press SYNCHRO REC again.
The programme recorded • If the settings for timer recordings and Synchronized
with the Synchronized
Recording function is
incomplete.
Recording overlap, the programme that starts first has
priority and the second programme starts recording only
after the first programme has finished.
• There was a power failure. Press SYNCHRO REC again.
The Set-Top Box control • Make sure you are pointing the remote commander only at
function does not work
properly.
the remote sensor on the VCR and not at the STB sensor.
• Make sure you are pointing the STB controller at the
remote sensor on the Set-Top Box.
• Make sure the STB controller is connected securely.
• The STB tuner brand number may be deleted if you
disconnect it from the VCR. Re-enter the brand code
You cannot watch the
STB picture when the
VCR is in standby mode
or recording standby
mode.
• Check that POWER SAVE in the OPTIONS-2 menu is set
Troubleshooting
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
A tape cannot be
inserted.
• Check that a tape is not already in the tape compartment.
The remote commander • Make sure you are pointing the remote commander at the
does not function.
remote sensor on the VCR.
• Replace all the batteries in the remote commander with
new ones if they are weak.
• Make sure the [TV] / [VIDEO] remote control switch is set
correctly.
The SMARTLINK
function does not work.
• Check that your TV complies with SMARTLINK,
MEGALOGIC, EASYLINK, Q-Link, EURO VIEW
LINK, or T-V LINK.
• Make sure you use the Scart cable to connect the VCR and
your TV.
• Make sure the Scart cable is connected securely.
The tracking meter does • The recording condition of the tape is very poor and
not appear on the TV
tracking cannot be adjusted.
screen.
• The tracking meter does not appear when playing back an
NTSC-recorded tape.
You cannot control other • Set your TV’s code number. The code number may change
TVs.
when you replace the batteries of the remote commander.
The display window
becomes dim.
• The display window automatically becomes dim when the
VCR is in standby or timer recording mode.
The VCR needs to be
cleaned.
• Clean the cabinet, panel and controls with a dry, soft cloth,
or a soft cloth slightly moistened with a mild detergent
solution. Do not use any type of solvent, such as alcohol or
benzine.
Symptoms caused by contaminated video heads
• Normal picture
• Rough picture
• Unclear picture
• No picture (or
black & white
screen appears)
initial
contamination
terminal
Troubleshooting
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
t LINE-2 IN L o R
System
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Channel coverage
PAL (I)
UHF B21 to B69
RF output signal
UHF channels 21 to 69
Aerial out
Input impedance: more than 47 kilohms
R/D L/G
Phono jack (2)
75-ohm asymmetrical aerial socket
Tape speed
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
STB CONTROL
SP: PAL 23.39 mm/s (recording/
playback)
NTSC 33.35 mm/s (playback only)
LP: PAL 11.70 mm/s (recording/
playback)
Stereo mini jack (plug in power) (1)
NTSC 16.67 mm/s (playback only)
EP: NTSC 11.12 mm/s (playback only)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Fast-forward and rewind time
Approx. 1 min. (with E180 tape)
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
20 W
Inputs and outputs
1.2 W (POWER SAVE is set to FULL,
minimum)
Operating temperature
5°C to 40°C
i LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
t LINE-3 IN
Storage temperature
–20°C to 60°C
Dimensions including projecting parts and
controls
Approx. 430 × 110 × 285 mm (w/h/d)
Mass
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Approx. 4.3 kg
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Set-Top Box controller (1)
Design and specifications are subject to
change without notice.
Specifications
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
L
S
Adjusting
Language selecting 30
LP mode 47
Safety tab 48
Scart connection 15
Searching
tracking 80
Aerial hookup 14
AFT (Auto Fine Tuning) 33
Audio dubbing 89
Audio track 71
Auto Clock Set 41
Auto Long Play 84
Auto Set Up 20
at various speeds 63
using the index function 79
using the Smart Search
function 72
M
Monaural 70
Monitoring
during playback 71
during recording 70
Security function 43
Set-Top Box
setting 23
N
NICAM broadcasts 70
Normal audio track 71
C
Smart Search 72
SMARTLINK
Changing the programme
position 34
Changing the station name 37
Cleaning the video heads 90
Clock setting 39
Colour system 2
compatible colour systems 2
Connecting
O
Automatic Power Off 16
One Touch Menu 16
One Touch Timer 16
Preset Download 16
SP mode 47
OPC (Optimum Picture
Control) 81
Optional setting 83
P
PDC (Programme Delivery
Control) 58
Adjusting
Playback 45
Stereo 70
Synchronized Recording 66
to a stereo system 19
to a TV with a Scart
Counter 45
T
Timer setting 60
at various speeds 63
frame-by-frame 63
selecting the sound 71
slow motion 63
cancelling 68
changing 68
checking 68
using the Dial Timer 51
using the VIDEO Plus+
system 56
D
Power save 82
Presetting channels 31
Dial Timer 51
Disabling the programme
positions 35
R
Reality Regenerator 80
Recording 47
Adjusting
E
bilingual programmes 70
duration time 65
saving 48
stereo programmes 70
timer setting 60
using the Dial Timer 51
VIDEO Plus+ 56
what you are watching on
the TV 49
Editing 86
EP mode 46
V
VIDEO Plus+ system 56
VPS (Video Programme
System) 58
H
Hi-fi audio track 71
I
while watching another
programme 48
Index search 79
Index
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
1 Connecting the VCR
3 Tuning your TV to the VCR
RF CHANNEL
1
PROGRAM +/–
AERIAL IN
A If your TV does not have a Scart (EURO-AV)
connector
AERIAL OUT
4
1 ...Press RF CHANNEL on the VCR lightly.
3
2
2 ...Turn on your TV and select a programme
position for the VCR picture.
3 ...Tune the TV to the same channel shown in
the VCR display window so that SONY
VIDEO CASSETTE RECORDER appears
clearly on the TV screen. Refer to your TV’s
instruction manual for tuning instructions.
: Signal flow yLINE-1 (TV)
1... Connect the aerial to AERIAL IN of the VCR.
2... Connect AERIAL OUT the aerial input of your
TV using the supplied aerial cable.
4 ...Press RF CHANNEL.
3... For better picture and sound, connect LINE-1
(TV) to your TV using a Scart cable if your TV
has a Scart (EURO-AV) connector.
B If your TV has a Scart (EURO-AV) connector
1 ...Press RF CHANNEL on the VCR lightly.
4... Connect the mains lead to the mains.
2 ...Press PROGRAM +/– to set the RF channel
to OFF.
2 Using the Auto Set Up function
AUTO SET UP
3 ...Press RF CHANNEL.
Now you can operate your VCR.
You can preset channels.
Setting your personal code
For security, you can enter a personal code (up to
eleven characters), such as your post code. If your
VCR is stolen and then recovered, you can identify
your VCR using your personal code. Once you
enter the code, you can never change it. Please
make a note of the code to quote to the police if your
VCR is stolen.
Hold down AUTO SET UP on the VCR for more
than three seconds.
When all the receivable channels are preset, “SET
UP” disappears from the display window. You can
rearrange the programme position to your favourite
order (see “Changing/disabling programme
positions”).
Printed on chlorine-free 100% recycled paper.
Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|