3-062-324-11 (1)
Video Cassette
Recorder
Operating Instructions
The SmartFile function in this model meets the requirements of EU, EFTA,
Central and Eastern Europe
PAL NTSC 4.43
SLV-SF990G
©2000 Sony Corporation
Chlorine free paper
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Getting Started
4
5
Step 1 : Unpacking
Step 2 : Setting up the remote commander
11 Step 3 : Connecting the VCR
18 Step 4 : Tuning your TV to the VCR
21 Step 5 : Setting up the VCR with the Auto Set Up function
22 Step 6 : Setting the clock
26 Step 7 : Setting the Set-Top Box
33 Selecting a language
34 Presetting channels
37 Setting/changing the station names
39 Changing/disabling programme positions
43 Setting your personal code
Basic Operations
SmartFile function
45 Playing a tape
80 About the SmartFile function
48 Recording TV programmes
82 Recording using the SmartFile
function
52 Recording TV programmes using the
VIDEO Plus + system
87 Selecting and playing a programme
57 Setting the timer manually
88 Checking the contents of a tape
90 Labelling a recorded programme and
tape
98 Registering the contents of a
recorded tape in the SmartFile label
Additional Operations
60 Playing/searching at various speeds
62 Setting the recording duration time
63 Synchronized Recording
100 Protecting a recorded programme
65 Checking/changing/cancelling timer
102 Erasing the data of an unwanted
settings
programme
67 Recording stereo and bilingual
Additional Information
104 Troubleshooting
110 Specifications
programmes
69 Searching using the index function
70 Adjusting the picture
111 Index to parts and controls
116 Menu chart
Back cover
72 Changing menu options
Editing
75 Connecting to a VCR or stereo
Index
system
77 Basic Editing
78 Audio dubbing
Table of contents 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1 : Unpacking
Check that you have received the following items with the VCR
:
• Remote commander
• Set-Top Box controller
• SmartFile labels
• R6 (size AA) batteries
• Aerial cable
4
Unpacking
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 : Setting up the remote commander
Inserting the batteries
Insert two R6 (size AA) batteries
by matching the + and – on the
batteries to the diagram inside the
battery compartment.
Insert the negative (–) end first,
then push in and down until the
positive (+) end clicks into
position.
Using the remote commander
You can use this remote
commander to operate this VCR
and a Sony TV. Buttons on the
remote commander marked with a
dot (•) can be used to operate your
Sony TV. If the TV does not have
Remote sensor
g
the
symbol near the remote
sensor, this remote commander
will not operate the TV.
[TV] / [VIDEO]
1
4
7
2
5
8
0
3
6
9
To operate
the VCR
Set [TV] / [VIDEO] to
[VIDEO] and point at the remote sensor on the VCR
a Sony TV
[TV] and point at the remote sensor on the TV
continued
Setting up the remote commander 5
Download from Www.Somanuals.com. All Manuals Search And Download.
?/1
Menu
buttons
AUDIO MONITOR
FASTEXT buttons
1
4
7
2
5
8
0
3
6
9
Programme
number
buttons
t TV/VIDEO
–/– –
DISPLAY
WIDE
PROG +/–
c/C
a
/
2 +/–
TV control buttons
To
Press
Set the TV to standby mode
Select an input source: aerial in or line in
Select the TV’s programme position
?/1
t TV/VIDEO
Programme number buttons,
–/– –, PROG +/–
Adjust the TV’s volume
Switch to TV (Teletext off)
Switch to Teletext
2 +/–
a (TV)
/ (Teletext)
AUDIO MONITOR
FASTEXT buttons
Select the sound
Use FASTEXT
6
Setting up the remote commander
Download from Www.Somanuals.com. All Manuals Search And Download.
To
Press
DISPLAY
Call up the on-screen display
Change the Teletext page
Operate the TV menu
c/C
Menu buttons
Switch to/from wide mode of a Sony wide TV (For other WIDE
manufactures’ wide TVs, see “Controlling other TVs with
the remote commander”.)
Notes
•
•
With normal use, the batteries should last about three to six months.
If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
•
•
•
Do not use a new battery with an old one together.
Do not use different types of batteries together.
Some buttons may not work with certain Sony TVs.
Setting the COMMAND MODE switch
To control the Sony VCRs with
this remote commander, set
COMMAND MODE on the
remote commander to the same
position as the one on the VCR.
Usually, it is set to VTR3. Change
the position as shown below to
control other Sony VCRs :
COMMAND
MODE
1
4
7
2
5
8
0
3
6
9
VTR1 : For Sony Betamax
format VCRs
VTR2 : For Sony 8mm
format VCRs
VTR3 : For Sony VHS
format VCRs
continued
Setting up the remote commander 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling other TVs with the remote commander
The remote commander is preprogrammed to control non-Sony TVs. If your TV is
listed in the table below, set the appropriate manufacturer’s code number.
Set TV/VIDEO at the top of the remote commander to TV.
1
Hold down ?/1, and enter your TV’s code number(s) using the programme
2 number buttons.Then release ?/1.
Now you can use the following TV control buttons to control your TV:
?/1, TV/VIDEO, programme number buttons, –/– – (ten’s digit), PROG +/–,
2 +/–, a (TV), / (Teletext), FASTEXT buttons, WIDE*, MENU*, CURSOR
M*/m*/<*/,*, and OK*.
* These buttons may not work with all TVs.
Tip
•
When you set your TV’s code number correctly while the TV is turned on, the TV turns off
automatically.
8
Setting up the remote commander
Download from Www.Somanuals.com. All Manuals Search And Download.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find
the one that works with your TV.
To switch to wide mode, see the footnotes below this table for the applicable code
numbers.
Manufacturer
Sony
Code number
Manufacturer
Nokia
Code number
01*1, 02, 03, 04, 05
15, 16, 69*3
Aiwa
32
Nordmende
Orion
35, 42
Akai
68
47, 48
17*1, 49
Blaupunkt
Brionvega
C.G.M
Colonad
Dual
10, 21
Panasonic
Philips
06*1, 07*1, 08*1
40
09
Phonola
Pioneer
Saba
18, 19
26
03
44
12, 13
22, 23
25
Emerson
Fenner
Ferguson
Goldstar
Grundig
Hitachi
Hyper
03, 04
Samsung
Sanyo
30, 31
52
Schneider
Seleco
46
03, 04, 17
14
10*1, 11*1
Sharp
29
24
Siemens
Sinudyne
TEAC
39
31
37
Inno-Hit
Irradio
41
67
20
Telefunken
Thomson
Toshiba
36
15, 16, 69*3
43*2
38
ITT
JVC
33
Loewe
45
White
34
Westinghouse
27*1, 28*1, 50*1, 51*1
Mitsubishi
Mivar
09
66
NEC
*1
Press WIDE to switch to the wide picture mode you want.
*2
*3
Press WIDE, then press 2 +/– to select the wide picture mode you want.
Press WIDE. The menu appears on the TV screen.Then, press CURSOR M/m/</, to
select the wide picture you want and press OK.
continued
Setting up the remote commander 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
If the TV uses a different remote control system from the one programmed to work with the
VCR, you cannot control your TV with the remote commander.
•
•
If you enter a new code number, the code number previously entered will be erased.
If you remove the batteries of the remote commander for more than a few minutes, the code
number may be reset to 01 (Sony). In this case, reset the appropriate code number.
10 Setting up the remote commander
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 : Connecting the VCR
We recommend connecting your VCR to your TV using a Scart (EURO-
AV) cable. You must still connect your VCR to your TV with an aerial
cable as well.
If you use the Scart (EURO-AV) cable for connecting, you will improve
the picture and sound quality playback of your VCR and make the set up
easier.
•
•
Connection to your TV with an aerial cable only, see page 14.
Connection to your TV and Set-Top Box, see page 15.
Connection to your TV with a Scart (EURO-AV) connector
AERIAL IN
iLINE-1
AERIAL OUT
(TV)
Mains lead
to mains
AERIAL IN
Aerial cable (supplied)
Scart
(EURO-AV)
Scart (EURO-AV) cable
(not supplied)
: Signal flow
Disconnect the aerial cable from your
TV and connect it to AERIAL IN on
the rear panel of the VCR.
1
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
Connect AERIAL OUT of the VCR
and the aerial input of your TV using
the supplied aerial cable.
AERIAL
2
ANTENNE
IN
ENTREE
OUT
SORTIE
continued
Connecting the VCR 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect LINE-1 (TV) on the VCR
and the Scart (EURO-AV) connector
on the TV with the optional EURO-
AV cable.
3
4
(
)
LINE-1 TV
(
)
LIGNE-1 TV
This connection improves picture and
sound quality.Whenever you want to
watch the VCR picture, press t TV/
VIDEO to display the VIDEO
indicator in the display window.
Connect the mains lead to the mains.
You can now tune your TV to the VCR (see page 18).
Notes
•
If the TV is connected to the LINE-1 (TV) connector, setting the RF channel to OFF is
recommended (see page 20). In the OFF position, only the signal from the aerial is output
through the AERIAL OUT connector.
•
For a correct SmartLink connection, you will need a Scart cable which the 21 pins are
completely connected (for example a Sony cable reference VMC-2121HG). Please refer to
your TV’s instruction manual as well for this connection.
12 Connecting the VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
About the SMARTLINK features
If the connected TV complies with
SMARTLINK, NexTView Link,
MEGALOGIC*1, EASYLINK /
CinemaLink*2, Q-Link*3 or T-V
LINK*4 , you can use the
AUO T U
SMARTLINK
OPC
P
H
M
S
SMARTLINK function after you complete the steps on the previous page (the SMARTLINK
indicator appears in the VCR’s display window when you turn on the TV).You can enjoy the
following SMARTLINK features.
• Preset Download
You can download your TV tuner preset data to this VCR and tune the VCR according to that
data in Auto Set Up. This greatly simplifies the Auto Set Up procedure. Be careful not to
disconnect the cables or exit the Auto Set Up function during the procedure.
See “Setting up the VCR with the Auto Set Up function” on page 21.
• TV Direct Rec
You can easily record what you are watching on the TV (other than tapes being played on this
VCR). For details, see “Recording what you are watching on the TV (TV Direct Rec)” on
page 51.
• One Touch Play
With One Touch Play, you can start playback automatically without turning on the TV. For
details, see “Starting playback automatically with one button (One Touch Play)” on page 47.
• One Touch Menu
You can turn on the VCR and TV, set the TV to the video channel, and display the VCR’s on-
screen display automatically by pressing MENU on the remote commander.
• One Touch Timer
You can turn on the VCR and TV, set the TV to the video channel, and display the timer
recording menu (the TIMER METHOD menu, the TIMER menu or the VIDEO Plus + menu)
automatically by pressing
TIMER on the remote commander. You can set which timer
recording menu is displayed using TIMER OPTIONS in the OTHER OPTIONS menu (see
page 74).
• Automatic Power off
You can have the VCR turn off automatically, if the VCR is not used for about 1 minute, after
you turn off the TV.
• NexTView Download
You can easily set the timer by using the NexTView Download function on your TV. Please
refer to your TV’s instruction manual.
*1
“MEGALOGIC” is a registered trademark of Grundig Corporation.
“EASYLINK /CinemaLink” is a trademark of Philips Corporation.
“Q-Link” is a trademark of Panasonic Corporation.
“T-V LINK” is a trademark of JVC Corporation.
*2
*3
*4
Note
•
Not all TVs respond to the functions above.
continued
Connecting the VCR 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to your TV with an aerial cable only
AERIAL IN
AERIAL OUT
Mains lead
AERIAL IN
to mains
Aerial cable (supplied)
: Signal flow
Disconnect the aerial cable from your
TV and connect it to AERIAL IN on
the rear panel of the VCR.
1
2
3
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
Connect AERIAL OUT of the VCR
and the aerial input of your TV using
the supplied aerial cable.
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
Connect the mains lead to the mains.
You can now tune your TV to the VCR (see page 18).
14 Connecting the VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to your TV and Set-Top Box (STB)
If you don’t use a STB, skip to page 18.
If your STB has a Scart (EURO-AV) connector
The illustration below shows an example of connecting the STB to LINE-4 IN. In this case, set
the STB CONNECTION setting to LINE-4 (see page 26).
Scart cable (supplied with
the STB)
STBcontroller
STB Control
Side view
(supplied)
AERIAL
STB
IN
tLINE
iLINE-
- 4 IN
AERIAL
OUT
1 (TV)
AERIAL IN
Aerial cable (supplied)
Scart
(EURO-AV)
Scart cable (not supplied)
: Signal flow
You can watch programmes from the Set-Top Box connected to this VCR on your TV even
when the VCR is turned off using the Line Through function. When you turn on the STB, this
VCR automatically sends the signal from the STB to the TV without turning itself on.
Connect the STB to the LINE-4IN connector as shown above.
1
Set POWER SAVE to OFF in the OTHER OPTIONS menu.
2
Turn off the VCR.
3
To watch a programme from the STB, turn on the STB and the TV.
For details, see page 26.
Note
•
You cannot watch programmes from your STB on the TV while recording unless you record
a programme from your STB.
continued
Connecting the VCR 15
Download from Www.Somanuals.com. All Manuals Search And Download.
If your STB does not have a Scart (EURO-AV) connector
Set the STB CONNECTION setting to RF (see page 26).
Aerial cable
(not supplied)
STB
Control
STB
controller
Side view
(supplied)
AERIAL
IN
STB
AERIAL
OUT
iLINE-
1 (TV)
AERIAL IN
Aerial cable (supplied)
Scart
(EURO-AV)
Scart cable* (not supplied)
: Signal flow
* If your TV doesn’t have a Scart (EURO-AV) connector, the Scart cable connected to the
VCR is not required.
16 Connecting the VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional connections
To a stereo system
You can improve sound quality by
connecting a stereo system to the AUDIO
OUT R/L jacks as shown on the right.
AUDIO OUT
R/L
LINE IN
Audio cable (not supplied)
To a TV that has phono type audio/
video input jacks (only if you don’t
connect the VCR and your TV using a
Scart (EURO-AV) connector)
This additional connection improves picture
and sound quality. Connect the TV as shown
on the right using a commercially available
connecting cable like the Sony VMC-810. If
your TV has only one audio input jack, use a
connecting cable like the Sony VMC-
910MS.
LINE-2 OUT
LINE IN
VMC-810 cable (not supplied)
Connecting the VCR 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4 : Tuning your TV to the VCR
If you have connected your VCR to the TV with an aerial
cable only
?/1
RF CHANNEL
g
PROGRAM +/–
•
Turn on your TV and press ?/1 (on/standby) to turn on the VCR.
1
2
Pull down the drop down panel.
Press briefly RF CHANNEL on the VCR.
AUTO SET UP
RF CHANNEL
The factory-preset RF (Radio Frequency) channel appears in the display
window..
SMARTLINK
PDC
H
M
S
Turn on your TV and select an unused programme position for the VCR
picture (for ex. programme position "0").
3
This programme position will be referred to as the video channel (for
watching your VCR on the TV) after tuning is completed.
18 Tuning your TV to the VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
Tune in the programme position you have
selected (for ex. programme position "0")
until the picture shown on the right appears
clearly on the TV screen (background must
be green).
4
5
SONY VIDEO CASSETTE RECORDER
Refer to your TV manual for tuning
instructions.
If the picture does not appear clearly, see
“To obtain a clear picture from the VCR”
below.
Press RF CHANNEL.
AUTO SET UP
RF CHANNEL
You have now tuned your TV to the VCR. From now on, whenever you
want to play a tape, set the TV to the video channel (for ex. programme
position "0").
You can now set your VCR with the Auto Set Up function (see page 21).
To check if the TV tuning is correct
Set the TV to the video channel (for ex. programme position "0") and press
PROGRAM +/– on the VCR. If the TV screen changes to a different programme each
time you press PROGRAM +/–, the TV tuning is correct.
To obtain a clear picture from the VCR
If the screen does not appear clearly in step 5 above, press PROGRAM +/–, so that
another RF channel appears.Then tune the TV to the new RF channel until a clear
picture appears.
continued
Tuning your TV to the VCR 19
Download from Www.Somanuals.com. All Manuals Search And Download.
If you have connected your VCR to the TV with a Scart
(EURO-AV) connector and an aerial cable as well
In order to avoid any interferences with existing broadcasts, we recom-
mend you to set RF channel to the OFF position.
RF CHANNEL
g
PROGRAM +/–
•
Turn on your TV and press ?/1 (on/standby) to turn on the VCR.
1
2
Pull down the drop down panel.
Press briefly RF CHANNEL on the VCR.
AUTO SET UP
The factory-preset RF (Radio Frequency) channel appears in the display
window.
RF CHANNEL
SMARTLINK
PDC
H
M
S
Press PROGRAM +/- until the OFF indication appears in the display
window. The RF channel is then switched off.
-
PROGRAM +
TRACKING
3
SMARTLINK
PDC
H
M
S
The picture shown below appears clearly on the TV screen (background
must be green).
SONY VIDEO CASSETTE RECORDER
Press RF CHANNEL again.
You can now set your VCR with the Auto Set Up function (see page 21).
AUTO SET UP
RF CHANNEL
4
Note
•
If in step 3 the green screen does not appear, select the "AV/EXTERNAL" source on your TV
(please refer to your TV instruction manual).
20 Tuning your TV to the VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set Up
function.With this function, you can set the language for the on-screen display, TV
channels, guide channels for the VIDEO Plus + system, and VCR clock
automatically.
Before you start ...
•
Turn on the set -top box if it is connected to the VCR only by the aerial cable and not to the
Scart cable.
AUTO SET UP
g
PROGRAM +/–
Hold down AUTO SET UP on the VCR for more than 3 seconds.
AUTO SET UP
RF CHANNEL
The VCR automatically turns on, and starts searching for all of the
receivable channels and presets them in the appropriate order for your local
area.
E
SMARTLINK
C
P
H
M
S
If you use the SMARTLINK connection, the Preset Download function
starts and the SMARTLINK indicator flashes in the display window during
download.
After the search or download is complete, the current time appears in the
display window for any stations that transmit a time signal.
To cancel the Auto Set Up function
Press AUTO SET UP.
Notes
•
Do not cancel the Auto Set Up function during step 3. If you do, repeat Auto Set Up from the
beginning.
•
When you operate the Auto Set Up function, some of the settings (VIDEO Plus +, timer
etc...) will be reset. In this case, you have to set them again.
Setting up the VCR with the Auto Set Up function 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6 : Setting the clock
You must set the time and date on the VCR to
use the timer recording features properly.
If the VCR clock was not set in the Auto Set
Up procedure, you need to set it manually.
MENU
OK
The Auto Clock Set function works only if a
station in your area is broadcasting a time
signal. If the Auto Set Up function did not set
the clock correctly for your local area, try
another station for the Auto Clock Set
function.
CURSOR
M/m/</,
1
4
7
2
5
8
0
3
6
9
Setting the clock manually
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
Press MENU, then press CURSOR M/m
to highlight SETTINGS and press OK.
SETTINGS
MENU
1
SET - TOP BOX
TUNER
CLOCK
LANGUAGE
TV GUIDE PAGE
RETURN
CURSOR
OK
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m to highlight
CLOCK, then press OK.
CLOCK
2
AUTO ADJUST
OFF
CURSOR
MANUAL ADJUST
1
. 1 . 2 0 0 0
SAT
0 : 0 0
OK
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m to highlight
MANUAL ADJUST, then press OK.
CLOCK
3
AUTO ADJUST
OFF
CURSOR
OK
MANUAL ADJUST
1
. 1 . 2 0 0 0
SAT
0 : 0 0
SELECT
SET
:
:
CONFIRM : OK
EXIT : MENU
22 Setting the clock
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CURSOR M/m to set the date.
CLOCK
4
5
AUTO ADJUST
OFF
CURSOR
MANUAL ADJUST
28 . 1 . 2 0 0 0
FRI
0 : 0 0
SELECT
SET
:
:
CONFIRM : OK
EXIT : MENU
Press CURSOR , to highlight the
month and set the month pressing
CURSOR M/m.
CLOCK
CURSOR
AUTO ADJUST
OFF
MANUAL ADJUST
2 8 . 9 . 2 0 0 0
THU
0 : 0 0
SELECT
SET
:
:
CONFIRM : OK
EXIT : MENU
Set the year, hour, and minutes in
sequence, pressing CURSOR , to
highlight the item to be set, and press
CURSOR M/m to select the digits.
CLOCK
6
7
AUTO ADJUST
OFF
CURSOR
MANUAL ADJUST
2 8 . 9 . 2 0 0 0
THU
1 8 : 0 0
The day of the week is set automatically.
SELECT
SET
:
:
CONFIRM : OK
EXIT : MENU
Press OK to confirm the setting and start
the clock.
OK
CLOCK
AUTO ADJUST
OFF
MANUAL ADJUST
2 8 . 9 . 2 0 0 0
THU
1 8 : 0 0
SELECT
SET
:
: OK
EXIT : MENU
Press MENU to exit the menu.
MENU
8
Tip
•
To change the digits while setting, press CURSOR < to return to the item to be changed,
and select the digits pressing CURSOR
/
M m
.
Note
•
The menu disappears automatically if you don’t proceed for more than a few minutes.
continued
Setting the clock 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the station for the Auto Clock Set function
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
MENU
OK
CURSOR
M/m/</,
1
4
7
2
5
8
0
3
6
9
Press MENU, then press CURSOR M/m
to highlight SETTINGS and press OK.
MENU
1
2
3
SETTINGS
SET - TOP BOX
TUNER
CLOCK
LANGUAGE
TV GUIDE PAGE
RETURN
CURSOR
OK
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m to highlight
CLOCK, then press OK.
CLOCK
CURSOR
OK
AUTO ADJUST
OFF
AUTO ADJUST is highlighted.
MANUAL ADJUST
1
. 1 . 2 0 0 0
SAT
0 : 0 0
SELECT
SET
:
: OK
EXIT : MENU
Press OK.
OK
CLOCK
AUTO ADJUST
ON
OFF
CLOCK PROGRAM
MANUAL ADJUST
2 8 . 9 . 2 0 0 0
THU
1 8 : 0 0
SELECT
:
CONFIRM : OK
EXIT : MENU
24 Setting the clock
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CURSOR M/m to highlight ON,
then press OK.
4
5
CLOCK
CURSOR
OK
AUTO ADJUST
ON
1
CLOCK PROGRAM
MANUAL ADJUST
2 8 . 9 . 2 0 0 0
AAB
THU
THU
THU
1 8 : 0 0
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR m to highlight CLOCK
PROGRAM, then press OK.
CLOCK
CURSOR
OK
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
2 8 . 9 . 2 0 0 0
1
AAB
1 8 : 0 0
SELECT
:
CONFIRM : OK
EXIT : MENU
Press CURSOR M/m until the
programme position of the station that
carries the time signal appears.
6
7
CLOCK
CURSOR
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
2 8 . 9 . 2 0 0 0
2
CDE
1 8 : 0 0
If the VCR does not receive the time
signal from any station, AUTO ADJUST
returns to OFF automatically.
SELECT
CONFIRM : OK
:
EXIT : MENU
Press MENU to exit the menu.
MENU
Tips
•
To change the digits while setting, press CURSOR < to return to the item to be changed,
and select the digits using CURSOR M/m.
•
If you set AUTO ADJUST to ON, the Auto Clock Set function is activated whenever the
VCR is turned off. The time is adjusted automatically by making reference to the time signal
from the station whose programme position is displayed in the “CLOCK PROGRAM” row.
If you do not need the Auto Clock Set function, select OFF.
Note
The menu disappears automatically if you don’t proceed for more than a few minutes.
•
Setting the clock 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 7 : Setting the Set-Top Box
If you did not connect a Set-Top Box (STB),
skip this step.
Before you start…
MENU
OK
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Connect the STB controller, remove the
protection sticker on the STB controller
and place it on top of the STB, so that it
hangs out over the infrared receptor on the
front of the STB (see page 15).
CURSOR
M/m/</,
Programme
number
1
4
7
2
5
8
0
3
6
9
buttons
STB
Press MENU, then press CURSOR M/m
to highlight SETTINGS and press OK.
MENU
SETTINGS
1
SET - TOP BOX
TUNER
CLOCK
LANGUAGE
TV GUIDE PAGE
RETURN
CURSOR
OK
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m to highlight SET-
TOP BOX, then press OK.
SET - TOP BOX
2
3
STB CONNECTION
RETURN
OFF
CURSOR
OK
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m/</, to
highlight STB CONNECTION and
press OK.
SET - TOP BOX
CURSOR
OK
OFF
RF
LINE2
LINE3
LINE4
STB CONNECTION
RETURN
SELECT
:
CONFIRM : OK
EXIT : MENU
26 Setting the Set-Top Box
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you connect the STB using the aerial
cable :
Press CURSOR M/m/</, to select RF
and press OK.
SET - TOP BOX
4
CURSOR
OK
STB CONNECTION
TUNER BRAND NO .
PROGRAMME NO .
RETURN
RF
- - -
0 6
Press CURSOR M/m/</, to highlight
PROGRAMME NO. and press OK. Enter
the appropriate number using CURSOR
M/m and press OK.
SELECT
SET
:
: OK
EXIT : MENU
• If you connect the STB using the Scart
(EURO-AV) cable :
Press CURSOR M/m/</, to select
LINE-4 and press OK.
SET - TOP BOX
STB CONNECTION
TUNER BRAND NO.
RETURN
LINE4
- - -
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m/</, to highlight
TUNER BRAND NO. and press OK.
Enter the appropriate number using the
programme number buttons. Refer to the
table on the next page. Press OK.
MENU
5
SET - TOP BOX
STB CONNECTION
TUNER BRAND NO .
PROGRAMME NO .
RETURN
RF
1 2 3
0 6
CURSOR
OK
SELECT
SET
:
: OK
EXIT : MENU
Press MENU to exit the menu.
1
4
7
2
5
8
0
3
6
9
Notes
•
If your VCR is connected to the STB by the aerial cable, enter the programme number of the
VCR corresponding to the channel where you have set up the STB output in step 4.
•
•
It is recommended to connect your STB to the LINE-4 connector.
For some STB, in order to avoid any conflict between the STB controller and the VCR
remote commander, be careful not to point the remote commander towards the STB and the
VCR at the same time.
•
You cannot watch programmes from your STB on the TV while recording unless you record
a programme from your STB.
continued
Setting the Set-Top Box 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Set-Top Box brand number
To control the STB, enter the appropriate number corresponding to your STB brand.
Some STBs may not operate at all with this VCR.
STB brand
Code numbers
STB brand
Code numbers
ABC
ABsat
Akai
Alba
025, 028
134, 843
526
Brunor
420
Bush
078, 102, 265
BT
526, 679, 721
102, 265, 373, 432,
466, 526, 624
Cabletime
Cambridge
Camundosat
Canal+
172, 282, 388, 459
267, 355, 526
Allantide
Amstrad
344
104
091, 224, 263, 349,
472, 520, 686, 700
864
Canal Satellite
Channel Master
CityCom
Clyde
864
Andover
Ankaro
Anttron
Arcon
Armstrong
Asat
555
373
228, 231, 380, 530
194, 432
283, 379
254
829
097
CME
091, 119, 184, 211
CNT
531
384
Comtec
Connexions
Conrad
277
AST
332, 361, 362
119, 384, 529
104, 407, 469
618
Astra
Astro
184, 369, 531, 559,
595
Contec
377
Audio Ton
Avalon
Axis
375
Cryptovision
Crown
611
407
254
377, 380
Cyrus
211
Birmingham Cable 287
Communications
Daewoo
D-box
384
734
British Telecom
Barcom
014, 116
DDC
373
228
Best
228, 380
184
Blaupunkt
Boca
254, 524, 840
343
Brain Wave
British Sky
858, 013, 012
Broadcasting
28 Setting the Set-Top Box
Download from Www.Somanuals.com. All Manuals Search And Download.
STB brand
Code numbers
STB brand
Code numbers
Diskxpress
DNT
228
Grundig
G-Sat
151, 184, 339, 474,
582, 761, 540
211, 407, 469
279, 470
690
194
Drake
Harting und Helling 344
Dynasat
Echostar
EEC
Hinari
194
181, 407, 465
344
Hirschmann
184, 344, 407, 408,
409, 513, 584, 592,
683, 764
EIF
428, 685
344
Hitachi
Houston
Humax
Huth
466
679
059
Einhell
Elta
375
Emanon
Emme Esse
Engel
432
231, 254, 375, 528,
600, 805
708
461
HyperVision
Ikusi Allsat
Imperial
IRTE
630
Eurodec
Europa
Ferguson
535, 537
708
379
265, 496
620
078, 194, 347, 625,
722
ITS
632
Fidelity
Finlux
263, 686
ITT
119, 183
014, 025, 287
343
119, 355, 408, 425,
466, 525
Jerrold
Johansson
JOK
Fraba Sat
Fracarro
France Telecom
Freecom
FTE
596
060
721
462
JSR
375
346, 432, 745
277, 342, 422
JVC
526, 582
Kathrein
103, 134, 184, 211,
342, 369, 453, 491,
515, 564, 592, 633,
636
Fuba
183, 228, 308, 309,
380, 407, 425, 428,
432, 720
Key West
König
805
Galaxis
375, 377, 844, 845
103, 183, 184
342, 346
184
Galaxisat
GEC
332
097
864
346
582
346
Kosmos
Kreiselmeyer
Kyostar
La Sat
Gold Box
Goldstar
Gooding
Grothusen
432
435, 475, 524, 531,
618
Lasat
833
continued
Setting the Set-Top Box 29
Download from Www.Somanuals.com. All Manuals Search And Download.
STB brand
Code numbers
STB brand
Code numbers
Lenco
346, 384, 422, 432,
461
Orbit
361, 362
596
Orbitec
Oxford
Pace
Lion
364
355
Lupus
380
078, 194, 339, 347,
466, 802, 806, 858
Luxor
119, 183, 584
Macab
535, 597
043
Pal
848
Magnavox
Manhattan
Maranz
Maspro
Matsui
Palcom
Palladium
Panasonic
Panda
308, 309
582
466, 531
211
225
103, 339, 347, 761
355, 582
864
466
Philips
630, 144, 211, 339,
466, 474, 582, 721,
761, 864
MediaSat
Mediamarkt
Memphis
Micro Technology
Minerva
Mintec
254
Phoenix
377
377
Phonotrend
Pioneer
799
344
155, 271, 544, 864
582
ProVision
Promax
595
466
496
224
014
589
MNet
030
Prosat
Morgan’s
Multistar
Muratto
Navex
254, 524, 840
342, 475
346
PTT Telecom
PVP Stereo Visual
Matrix
Pyxis
842
343
Quadral
Radiola
Radix
RFT
373, 530, 639
211
NEC
189
Neusat
703, 845
231
407, 893, 764
211, 231, 552
Newhaus
Next-Wave
Nikko
743
Saba
265, 347, 364, 531,
586, 701, 720, 745
371
Nokia
034, 692, 119, 183,
339, 408, 425, 466,
584, 734, 832
Sabre
466
Sagem
Sakura
Salora
Samsung
831
Nordmende
Oceanic
283, 373, 625
597
377
119, 183, 210
283
30 Setting the Set-Top Box
Download from Www.Somanuals.com. All Manuals Search And Download.
STB brand
Code numbers
STB brand
Code numbers
SAT
332, 361, 362, 472
Thorens
Tonna
TPS
597
679
831
Satbox
Satcom
Satec
386
224
194, 339
283
Triad
332, 344, 346, 361,
362
Satmaster
SatPartner
Triasat
425
343, 346, 432, 513,
531, 703, 720, 745
Tristar
277
Schwaiger
Scientific Atlanta
Seemann
SEG
194, 515
Tudi
297
019, 028, 288
407, 589, 637
380, 432, 529, 753
184
Uniden
205, 803, 842
377
Unisat
United Cable
Unitor
014
Siemens
228, 343
184, 525, 582
344, 364, 529
211
Skymaster
Sony
530, 639
Universum
Vector
286, 289, 293, 650,
715
Ventana
Videoway
VisiCable+
Vortec
Stella
104
261
STVI
428
492
STS
167
432
Sunstar
Tandberg
Tantec
Tatung
TechniSat
524, 805
VTech
332, 473, 771
362, 701
116
742
Vtech
308, 309, 347, 466
156
Westminster
272, 273, 331, 420,
469, 552, 559, 596
Teco
384
Telecom
Telefunken
Teleka
104
432
254, 624, 683
435
Telemax
Teleservice
Televes
292
596
Tensai
632
Thomson
466, 864
continued
Setting the Set-Top Box 31
Download from Www.Somanuals.com. All Manuals Search And Download.
STB brand
Code numbers
STB brand
Code numbers
Wevasat
Winersat
Wisi
344
343
XSat
134, 900
900
Xcom Multimedia
Zehnder
184, 332, 362, 383,
407, 417, 418, 426,
466, 647, 649, 701
332, 342, 531, 829
011, 536
805
Zenith
Zwergnase
Wolsey Gene
555
Note
•
To check if the brand number is entered correctly or not, press STB repeatedly to display
"STB" in the display window then enter a three digit number with the programme number
buttons. If the STB responds, you have enterred the correct brand number.
32 Setting the Set-Top Box
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a language
If you prefer an on-screen lanuage other than
English, use the on screen display to select
another language.
MENU
OK
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
CURSOR
M/m/</,
1
4
7
2
5
8
0
3
6
9
Press MENU, then press CURSOR M/m
to highlight SETTINGS and press OK.
MENU
SETTINGS
1
2
SET - TOP BOX
TUNER
CLOCK
LANGUAGE
TV GUIDE PAGE
RETURN
CURSOR
OK
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m to highlight
LANGUAGE, then press OK.
LANGUAGE
ENGLISH
NEDERLANDS
DANSK/NORSK
SVENSKA
SUOMI
EΛΛHNIKA
TÜRKÇE
CURSOR
OK
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
PORTUGUÊS
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m/</, to highlight the desired language, then press
OK.
3
4
CURSOR
OK
Press MENU to exit the menu.
MENU
Note
•
The menu disappears automatically if you don’t proceed for more than a few minutes.
Selecting a language 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting channels
If some channels could not be preset using
the Auto Set Up function, you can preset
them manually.
MENU
OK
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
CURSOR
M/m/</,
1
4
7
2
5
8
0
3
6
9
PROG +/–
Press MENU, then press CURSOR M/m
to highlight SETTINGS and press OK.
MENU
SETTINGS
1
SET - TOP BOX
TUNER
CLOCK
LANGUAGE
TV GUIDE PAGE
RETURN
CURSOR
OK
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m to highlight
TUNER, then press OK.
TUNER
PROG.
AAB
1
2
3
CURSOR
OK
CHANNEL SET
AFT
FINE TUNING
RETURN
C
1 2
ON
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m to highlight
CHANNEL SET.
TUNER
PROG.
AAB
1
CHANNEL SET
AFT
FINE TUNING
RETURN
C
1 2
CURSOR
OK
ON
SELECT
SET
:
: OK
EXIT : MENU
34 Presetting channels
Download from Www.Somanuals.com. All Manuals Search And Download.
Press PROG +/– to select the programme
position.
Selected programme
position
PROG
4
5
TUNER
PROG.
4
CHANNEL SET
AFT
C
1 2
ON
FINE TUNING
RETURN
SELECT
SET
:
: OK
EXIT : MENU
Press OK to highlight the channel
number row, then press CURSOR M/m to
start tuning.
TUNER
PROG.
2 7 TUV
4
CURSOR
OK
CHANNEL SET
AFT
C
ON
FINE TUNING
RETURN
The VCR starts searching for a channel
and displays the first one it finds on the
TV screen. Press CURSOR M/m
repeatedly until the channel you want is
displayed.
SELECT
:
CONFIRM : OK
EXIT : MENU
The channels are scanned in the
following order:
• UHF B21 - B69
If you know the number of the channel you want, press the programme
number buttons. For example, for channel 05, first press “0” and then
press “5.”
OK
Press OK.
6
7
8
To allocate another channel to another programme position, repeat steps 4
and 5.
Press MENU to exit the menu.
MENU
continued
Presetting channels 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Disabling unwanted programme positions
After tuning the TV channels, you can disable unused programme positions. The
disabled positions will be skipped later when you press the PROG +/– buttons.
You can also disable unwanted programme positions using the CHANNEL LIST
menu (see page 39).
In step 5 above, press programme number button “0” twice to display the number
1 “00” beside CHANNEL SET.
Press OK to confirm the setting, then MENU to exit the menu.
2
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels
clearly. If, the picture is not clear, you may also use the manual tuning function.
Press PROG +/– or the programme number buttons to select the programme
1 position for which you cannot obtain a clear picture.
Press MENU, then select SETTINGS and press OK.
2
Select TUNER, then press OK.
3
Select FINE TUNING.
4
The fine tuning meter appears.
TUNER
PROG.
2 7 TUV
4
Selected programme
position
CHANNEL SET
AFT
C
FINE TUNING
RETURN
SET
:
EXIT : MENU
Press CURSOR </, to get a clearer picture, then press MENU to exit the
5 menu.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Tip
If you want to return to the previous menu, highlight RETURN and press OK.
•
Note
•
The menu disappears automatically if you don’t proceed for more than a few minutes.
36 Presetting channels
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting/changing the station names
You can also set and change station names as
you like (up to 5 characters). The set station
names are displayed on the TV screen when
you change the programme position on the
VCR.
MENU
OK
CURSOR
M/m/</,
Before you start…
1
4
7
2
5
8
0
3
6
9
• Turn on the VCR and the TV.
• Set the TV to the video channel.
Press MENU, then press CURSOR M/m
to highlight LISTS and press OK.
MENU
1
LISTS
CHANNEL LIST
TIMER LIST
RETURN
CURSOR
OK
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m to highlight
CHANNEL LIST, then press OK.
CHANNEL LIST
2
3
PROG
CH
NAME
AAB
CDE
CURSOR
OK
1
2
3
4
5
C
C
C
C
C
1 2
0 3
5 6
2 7
0 9
FGH
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
CLEAR
EXIT : MENU
Press CURSOR M/m to highlight the row
on which you want to set or change the
station name.
CHANNEL LIST
CURSOR
PROG
CH
NAME
AAB
CDE
1
2
3
4
5
C
C
C
C
C
1 2
0 3
5 6
2 7
0 9
To display other pages for programme
positions 6 to 60, press CURSOR M/m
repeatedly.
FGH
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
CLEAR
EXIT : MENU
continued
Setting/changing the station names 37
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you want to set the station name,
press CURSOR , twice to highlight
the station name column only.
• If you don’t want to set the station
name, go to step 7.
CHANNEL LIST
4
5
CURSOR
PROG
CH
NAME
AAB
1
2
3
4
5
C
C
C
C
C
1 2
0 3
5 6
2 7
0 9
CDE
FGH
SELECT A CHARACTER
NEXT
CONFIRM
:
:
: OK
EXIT : MENU
Enter the station name.
CHANNEL LIST
CURSOR
1 Press CURSOR M/m to select a
character.
PROG
CH
NAME
1
2
3
4
5
C
C
C
C
C
1 2
0 3
5 6
2 7
0 9
AAB
CDE
L
Each time you press CURSOR M, the
character changes as shown below.
At Bt ... t Z t a t b t...
t z t 0 t 1 t ... t 9 t
(symbols) t(blank space) t A
FGH
SELECT A CHARACTER
NEXT
PREVIOUS
:
:
:
EXIT : MENU
2 Press CURSOR, to set the next character.
The next space is highlighted.
To correct a character, press CURSOR < until the character you want
to correct is highlighted, then reset it.
You can set up to 5 characters for the station name.
To change or to set the station name of another station, repeat steps 2 to 4.
6
7
Press OK to confirm the setting.
OK
CHANNEL LIST
PROG
CH
1 2
0 3
5 6
2 7
0 9
NAME
AAB
CDE
LMO
1
2
3
4
5
C
C
C
C
C
FGH
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
CLEAR
EXIT : MENU
MENU
Press MENU to exit the menu.
8
Note
•
The menu disappears automatically if you don’t proceed for more than a few minutes.
38 Setting/changing the station names
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing/disabling programme positions
After setting the channels, you can change
the programme positions as you like. If any
programme positions are unused or contain
MENU
OK
unwanted channels, you can disable them.
Before you start…
CURSOR
M/m/</,
• Turn on the VCR and the TV.
• Set the TV to the video channel.
1
4
7
2
5
8
0
3
6
9
Changing programme positions
Press MENU, then press CURSOR M/m
to highlight LISTS and press OK.
MENU
1
LISTS
CHANNEL LIST
TIMER LIST
RETURN
CURSOR
OK
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m to highlight
CHANNEL LIST, then press OK.
2
CHANNEL LIST
CURSOR
OK
PROG
CH
NAME
AAB
CDE
1
2
3
4
5
C
C
C
C
C
1 2
0 3
5 6
2 7
0 9
FGH
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
CLEAR
EXIT : MENU
continued
Changing/disabling programme positions 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CURSOR M/m to highlight the row
on which you want to change the
programme position, then press
CURSOR ,.
3
4
5
CHANNEL LIST
CURSOR
PROG
CH
NAME
AAB
CDE
LMO
1
2
3
4
5
C
C
C
C
C
1 2
0 3
5 6
2 7
0 9
FGH
To display other pages for programme
positions 6 to 60, press CURSOR M/m
repeatedly.
SELECT
SET STATION NAME
CONFIRM
:
:
: OK
EXIT : MENU
Press CURSOR M/m until the selected
channel row moves to the desired
programme position.
CHANNEL LIST
CURSOR
PROG
CH
NAME
LMO
AAB
1
2
3
4
5
C
C
C
C
C
5 6
1 2
0 3
2 7
0 9
CDE
The selected channel is inserted at the
new programme position and the
intermediate channels are displaced to fill
the gap.
FGH
SELECT
SET STATION NAME
CONFIRM
:
:
: OK
EXIT : MENU
Press OK to confirm the setting.
OK
To change the programme position of another station, repeat steps 3 to 5.
Press MENU to exit the menu.
6
7
MENU
40 Changing/disabling programme positions
Download from Www.Somanuals.com. All Manuals Search And Download.
Disabling unwanted
programme positions
After presetting channels, you can disable
unused programme positions.The disabled
positions will be skipped later when you
press the PROG +/– buttons.
MENU
OK
CURSOR
M/m/</,
1
4
7
2
5
8
0
3
6
9
CLEAR
Press MENU, then press CURSOR M/m
to highlight LISTS, and press OK.
MENU
1
2
LISTS
CHANNEL LIST
TIMER LIST
RETURN
CURSOR
OK
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m to highlight
CHANNEL LIST, then press OK.
CHANNEL LIST
CURSOR
PROG
CH
NAME
AAB
CDE
1
2
3
4
5
C
C
C
C
C
1 2
0 3
5 6
2 7
0 9
FGH
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
CLEAR
EXIT : MENU
continued
Changing/disabling programme positions 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CURSOR M/m to highlight the row
which you want to disable.
3
4
CHANNEL LIST
CURSOR
PROG
CH
NAME
AAB
CDE
LMO
1
2
3
4
5
C
C
C
C
C
1 2
0 3
5 6
2 7
0 9
FGH
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
CLEAR
EXIT : MENU
Press CLEAR.
CLEAR
CHANNEL LIST
The selected row will be cleared as
shown on the right.
PROG
CH
1 2
0 3
NAME
AAB
CDE
1
2
3
4
5
C
C
C
C
2 7
0 9
FGH
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
CLEAR
EXIT : MENU
Repeat steps 3 and 4 for any other programme positions you want to
disable.
5
6
Press MENU to exit the menu.
MENU
Notes
•
•
The menu disappears automatically if you don’t proceed for more than a few minutes.
Be sure to select the programme position you want to disable correctly. If you disable a
programme position by mistake, you need to reset that channel manually.
42 Changing/disabling programme positions
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting your personal code
This VCR is equipped with a security
function that assures quick identification of
your set in case of a robbery. Just enter the
Personal Code to personalize your set. Once
you enter your personal code, you can check
it any time but can never change it.
OK
CURSOR
M/m/</,
CLEAR
1
4
7
2
5
8
0
3
6
9
Before you start…
• Turn on your TV and set it to the video
channel.
• Remove the tape in the VCR if there is one
inserted.
• Turn off the VCR.
X
?/1
g
Hold down first X (pause), hold on ?/1
(on/standby) simultaneously on the VCR
for more than 3 seconds.
SECURITY FUNCTION
1
•
PERSONAL CODE
– – – – – – – – – – –
The VCR automatically turns on, and the
on-screen display appears on the TV
screen.
SELECT
SET
:
:
CONFIRM : OK
EXIT : MENU
Press CURSOR M/m/</, to enter your
personal code.
SECURITY FUNCTION
2
CURSOR
OK
PERSONAL CODE
WB – 1 5 7 8 – – – –
1 Press CURSOR M/m to select a
character.
SELECT
SET
:
:
2 Press CURSOR, to set the next
character.
CONFIRM : OK
EXIT : MENU
The next space is highlighted.
To correct a character, press CURSOR
</, until the character you want to
correct is highlighted, then reset it.
You can set up to 11 characters for your
personal code.
continued
Setting your personal code 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Press OK.
SECURITY FUNCTION
OK
3
PERSONAL CODE
WB – 1 5 7 8 – – – –
A confirmation screen appears.
FINAL CONFIRM
CANCEL
: OK
: CLEAR
EXIT : MENU
OK
If the displayed personal code is correct, press OK to confirm the setting
and to return to the normal display.
4
5
If the displayed personal code is wrong, press CLEAR to cancel the code
and re-enter it restarting from step 2.
CLEAR
Press ?/1 (on/standby) to turn off the VCR.
•
Checking your personal code
After setting the personal code number of your VCR, you can check the setting.
Holding down first X (pause), hold down ?/1 (on/standby) for more than 3
1 seconds.
The VCR automatically turns on, and the entered personal code appears on the
TV screen.
SECURITY FUNCTION
PERSONAL CODE
WB – 1 5 7 8 – – – –
EXIT : MENU
Press OK to exit the menu.
2
44 Setting your personal code
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Playing a tape
Z EJECT
CLEAR
1
4
7
2
5
8
0
3
6
9
DISPLAY
m REW
M FF
X PAUSE
H PLAY
x STOP
NTSC PB
Turn on your TV and set it to the video channel.
Insert a tape.
1
2
The VCR turns on and starts playing
automatically if you insert a tape with its
safety tab removed.
Press H PLAY.
3
PLAY
When the tape reaches the end, it will rewind automatically.
continued
Playing a tape 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional tasks
To
Press
Stop play
x STOP
Pause play
X PAUSE
Resume play after pause
Fast-forward the tape
Rewind the tape
Eject the tape
X PAUSE or H PLAY
M FF during stop
m REW during stop
Z EJECT
To play an NTSC-recorded tape
Set NTSC PB at the rear of the VCR according to the colour system of your TV.
When your TV is
PAL only
Set NTSC PB to
ON PAL TV
PAL and NTSC
NTSC 4.43
To use the time counter
Press CLEAR at the point on the tape that you want to find later. The counter in the
display window resets to “0:00:00.” Search for the point afterwards by referring to
the counter.
C
VIDEO
P
H
M
S
To display the counter on the TV screen, press
DISPLAY.
Notes
•
•
•
The counter resets to “0:00:00” whenever a tape is reinserted.
The counter stops counting when it comes to a portion with no recording.
Depending on your TV, the following may occur while playing an NTSC-recorded tape:
– The picture becomes black and white.
– The picture shakes.
– No picture appears on the TV screen.
– Black streaks appear horizontally on the TV screen.
– The colour density increases or decreases.
•
If you playback a tape in LP or EP mode with the NTSC system, the sound is heard in
monaural.
46 Playing a tape
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting playback automatically with one button (One
Touch Play)
If you use the SMARTLINK connection, you can turn on the VCR and the TV, set the
TV to the video channel, and start playback automatically with one button.
Insert a tape.
1
The VCR automatically turns on.
If you insert a tape with its safety tab removed, the TV turns on and switches to
the video channel. Playback starts automatically.
Press H PLAY.
2
The TV turns on and switches to the video channel automatically. Playback
starts.
Tip
•
When there already is a tape in the VCR, the VCR and the TV turn on, the TV is set to the
video channel, and playback starts automatically in one sequence when you press H PLAY.
Note
When you use the One Touch Play function, leave the TV on or in the standby mode.
•
Playing a tape 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes
1
4
7
2
5
8
0
3
6
9
COUNTER/REMAIN
DISPLAY
STB
t TV/VIDEO
INPUT SELECT
PROG +/–
SP/LP
z REC
x STOP
Turn on your TV and set it to the video channel.
To record from a decoder or other source, turn it on.
1
2
Insert a tape with its safety tab in place.
48 Recording TV programmes
Download from Www.Somanuals.com. All Manuals Search And Download.
• To record a normal channel.
Press PROG +/– until the programme position number you want appears
in the display window.
PROG
3
SP
VIDEO
PDC
H
M
S
• To record a video source from the LINE-1 (TV) or LINE-4 (Scart)
connector, or the LINE-2 IN or LINE-3 IN jacks. Press INPUT SELECT
until L1, L2, L3 or L4 appears in the display window.
INPUT
SELECT
SP
VIDEO
PDC
H
M
S
STB
• To select a channel for your Set-Top Box.
Press STB. The STB indicator lights up in the display window. Then
enter a three digit STB channel number with the programme number
buttons.
1
2
5
8
0
3
6
9
4
7
SP
VIDEO
STB
PDC
H
M
S
Press SP/LP to select the tape speed, SP or LP.
SP/LP
4
5
LP (Long Play) provides recording time twice as long as SP. However, SP
(Standard Play) produces better picture and audio quality.
SP
LP
OPC
VIDEO
PDC
H
M
S
Press z REC to start recording.
The recording indicator lights up red in the display window.
REC
Recording
indicator
LP
VIDEO
PDC
H
M
S
To stop recording
Press x STOP.
continued
Recording TV programmes 49
Download from Www.Somanuals.com. All Manuals Search And Download.
To check the remaining time
Press
DISPLAY. With the display on, press COUNTER/REMAIN to check the
remaining time. Each time you press COUNTER/REMAIN, the time counter and the
remaining time appear alternately. The
indicator indicates the remaining time..
1H46M
SP
0 : 0 0 : 2 2
Time counter
Remaining time
In order to get an accurate remaining time indication, be sure the TAPE LENGTH
item in the TAPE OPTIONS menu is set according to the tape type you use (see page
73).
To watch another TV programme while recording
Press t TV/VIDEO on the remote commander to turn off the VIDEO indicator
1 in the display window.
Select another programme position on the TV.
2
To protect a recording
To prevent accidental erasure, break off the safety
tab as illustrated. To record on a tape again, cover
the tab hole with adhesive tape.
You can also protect a recording by using the
SmartFile function (see page 100).
Tips
Safety tab
•
To select a programme position, you can use the
programme number buttons on the remote
commander. For two-digit numbers, press the –/– –(ten’s digit) button followed by the
programme number buttons.
•
•
The display appears on the TV screen indicating information about the tape, but the
information won’t be recorded on the tape.
If you don’t want to watch TV while recording, you can turn off the TV.
When using a decoder or other source, make sure to leave it on.
50 Recording TV programmes
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
If a tape has portions recorded in both PAL and NTSC systems, the time counter reading will
not be correct. This discrepancy is due to the difference between the counting cycles of the
two video systems.
•
You cannot watch a PAY-TV/Canal Plus programme while recording another PAY-TV/Canal
Plus programme.
•
•
The remaining time is intended for rough measurement only.
The remaining time will be displayed for only about 30 seconds after the tape starts playback.
Recording what you are watching on the TV (TV Direct
Rec)
If you use the SMARTLINK connection, you can easily record what you are
watching on the TV (other than tapes being played on the VCR).
Insert a tape with its safety tab in place.
1
Press z REC while you are watching a TV programme or external source.
2
The VCR automatically turns on, then the TV indicator lights up and the VCR
starts recording what you are watching on the TV.
Tips
•
The TV indicator appears in the display window after you press z REC in some situations
such as:
– when you are watching a source connected to the TV’s line input, or
– when the TV tuner preset data for the programme position is different from the data preset
in the VCR tuner.
•
•
If there already is a tape with its safety tab in place in the VCR, the VCR automatically turns
on and starts recording what you are watching on the TV when you press z REC.
You can turn the TV Direct Rec function ON and OFF in the OTHER OPTIONS menu (see
page 74).
Notes
•
•
You cannot record what you are watching using this method when the VCR is in the
following modes : pause, timer standby, tuner preset, Auto Set Up, and recording. You also
cannot record using this method when the tape’s safety tab is removed, the tape is at the end
or the tape is stopped at a programme protected by SmartFile.
When the TV indicator is lit in the display window, do not turn off the TV nor change the TV
programme position. When the TV indicator is not lit, the VCR continues recording the
programme even if you change the TV programme position on the TV.
Recording TV programmes 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes using the
VIDEO Plus + system
The VIDEO Plus + system is a feature that
?/1
simplifies programming the VCR to make
timer recordings. Just enter the PLUSCODE
NO. listed in the TV programme guide. The
date, times, and programme position of that
programme are set automatically. You can
preset up to eight programmes at a time.
TIMER
OK
CURSOR
M/m/</,
1
4
7
2
5
8
0
3
6
9
Before you start…
• Check that the VCR clock is set to the
correct time and date.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
Programme
number
buttons
CLEAR
SP/LP
• Turn on your TV and set it to the video
channel.
• If you insert a tape with the SmartFile
function, make sure the total recording
time doesn’t overlap the protected
programme. For details about the
SmartFile function, see page 80.
x STOP
• Set TIMER OPTIONS to VIDEO Plus +
or VARIABLE in the OTHER OPTIONS
menu (see page 74).
52 Recording TV programmes using the VIDEO Plus + system
Download from Www.Somanuals.com. All Manuals Search And Download.
Press
TIMER.
TIMER
1
• When you set TIMER OPTIONS to
VARIABLE:
TIMER METHOD
STANDARD
VIDEO Plus +
The TIMER METHOD menu appears
on the TV screen. Press CURSOR
M/m to select VIDEO Plus +, then
press OK.
CURSOR
OK
SELECT
SET
:
: OK
EXIT : MENU
2 8 . 9 THU
• When you set TIMER OPTIONS to
VIDEO Plus +:
The VIDEO Plus +, menu appears on
the TV screen.
VIDEO Plus +
PLUSCODE NO.
– – – – – – – – –
SET
:
0–9
EXIT : MENU
Press the programme number buttons to
enter the PLUSCODE NO.
VIDEO Plus +
2
1
4
7
2
3
6
9
2 8 . 9 THU
PLUSCODE NO.
1 2 4 6 – – – – –
5
8
0
If you make a mistake, press CLEAR and
re-enter the correct number.
CLEAR
SET
CONFIRM : OK
CANCEL CLEAR
:
0–9
:
EXIT : MENU
continued
Recording TV programmes using the VIDEO Plus + system 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Press OK.
3
TIMER
2 8 . 9 THU
CURSOR
OK
The date, start and stop times, programme
position, tape speed, and VPS/PDC setting
appear on the TV screen.
DATE
TIME
2 0 : 0 0 2 1 : 0 0
PROG.
AAB
TODAY
SP / LP
LIST
SP
VPS / PDC
OFF
If “– –” appears in the “PROG.”
SELECT
:
:
:
(programme) column (this may happen for
local broadcasts), you have to set the
appropriate programme position manually.
SET
CANCEL
CLEAR
EXIT : MENU
• To select a terrestrial channel.
Press CURSOR M/m to select the desired programme position.
• To select a video source from the LINE-1 (TV) or LINE-4 IN connector,
or the LINE-2 IN or the LINE-3 jacks.
Press INPUT SELECT to select the desired video source.
• To select a satellite channel
Press STB. “STB ---” appears in the PROG position on the TV screen.
Then enter a three digit channel number with the number buttons.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
For details about the VPS/PDC function, see “Timer recording with VPS/
PDC signals” on page 55.
CLEAR
CURSOR
If the information is incorrect, press CLEAR to cancel the setting.
If you want to change the date, tape speed,
and the VPS/PDC function setting:
4
TIMER
2 8 . 9 THU
DATE
TODAY
TIME
PROG.
AAB
2 0 : 0 0 2 1 : 0 0
1 Press CURSOR </, to highlight the
SP / LP
LIST
SP
VPS / PDC
OFF
item you want to change.
2 Press CURSOR M/m to reset it.
SELECT
:
:
:
SET
CANCEL
CLEAR
EXIT : MENU
• To record the same programme every
day or the same day every week, see
“Daily/weekly recording” on page 55.
• To use the VPS/PDC function, set VPS/PDC to ON. For details about the
VPS/PDC function, see “Timer recording with VPS/PDC signals” on
page 55.
• To change the setting, press MENU, and highlight LIST, then select
TIMER LIST and press OK. Then enter the new timer setting and press
OK.
CLEAR
MENU
If the information is not correct, press CLEAR to cancel the settings.
Press MENU to exit the menu.
5
54 Recording TV programmes using the VIDEO Plus + system
Download from Www.Somanuals.com. All Manuals Search And Download.
Press ?/1 to turn off the VCR.
6
The
indicator appears in the display window and the VCR stands by for
recording.
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 4 above, press CURSOR m to select the recording pattern. Each time you
press CURSOR m, the indication changes as shown below. Press CURSOR M to
change the indication in reverse order.
TODAY t SUN-SAT (Sunday to Saturday) t MON-SAT (Monday to
Saturday) t MON-FRI (Monday to Friday) t SAT (every Saturday) .....
t MON (every Monday) t SUN (every Sunday) t 1 month later
t (dates count down) t TOMORROW t TODAY
Timer recording with VPS/PDC signals
Some broadcast systems transmit VPS (Video Programme System) or PDC
(Programme Delivery Control) signals with their TV programmes. These signals
ensure that your timer recordings are made regardless of broadcast delays, early
starts, or broadcast interruptions (when the VPS or PDC indicator in the display
window is lit).
In step 4 above, press CURSOR M/m to turn on/off the VPS/PDC indication after you
set the recording date. If you do not want to set the VPS/PDC function, turn off the
VPS/PDC indication.
You can also use the VPS/PDC function for a source connected to the LINE-1 (TV)
and LINE-4 IN (Scart) connectors, or the LINE-2 IN or LINE-3 IN jacks.
To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press ?/1. The
indicator
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR after
using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings (see “Setting the timer manually” on page 57).
• Watch another TV programme.
continued
Recording TV programmes using the VIDEO Plus + system 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
•
To set the programme position with a two digit number, press –/– – (ten’s digit) button
followed by the programme number button.
•
To set the programme position, you can also use the PROG +/– or programme number
buttons.
•
•
To set the tape speed, you can also use the SP/LP button.
When you are recording a programme in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to the LP mode.
Note that some interference will appear on the picture at the point the tape speed is changed.
If you want to keep the same tape speed, set AUTO LONG PLAY to OFF in the TAPE
OPTIONS menu (see page 72).
•
To check, change, or cancel the programme setting, press CURSOR </, to choose LIST,
then press OK after step 4. For details, see step 3 in “Checking/changing/cancelling timer
settings on page 65.
Notes
•
When setting the timer with VPS/PDC signals, enter the start and stop times exactly as
indicated in the TV programme guide, otherwise the VPS/PDC function won’t work and the
recording won’t start.
•
If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC
signals, the VCR will start recording at the set time without using the VPS/PDC function.
•
•
The
indicator flashes in the display window when you press ?/1 with no tape inserted.
The VPS/PDC function is automatically set to OFF for the timer recording of a satellite
programme.
•
When you set TIMER OPTIONS to STANDARD in the OTHER OPTIONS menu, the
VIDEO Plus + menu does not appear on the TV screen. Select VIDEO Plus + or
VARIABLE.
56 Recording TV programmes using the VIDEO Plus + system
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the timer manually
If the VIDEO Plus + system is not available
in your area, follow the instructions below to
set the timer to record programmes.
?/1
TIMER
Before you start…
• Check that the VCR clock is set to the
OK
CURSOR
correct time and date.
M/m/</,
1
4
7
2
5
8
0
3
6
9
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• To record from a decoder or other source,
turn it on.
Programme
number
buttons
STB
• Turn on your TV and set it to the video
channel.
INPUT
SELECT
• If you insert a tape with the SmartFile
function, make sure the total recording
time doesn’t overlap the protected
programme. For details about the
SmartFile function, see page 80.
• Set TIMER OPTIONS to STANDARD or
VARIABLE in the OTHER OPTIONS
menu (see page 74).
x STOP
continued
Setting the timer manually 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Press
TIMER.
TIMER
1
• When you set TIMER OPTIONS to
VARIABLE:
TIMER METHOD
STANDARD
VIDEO Plus +
The TIMER METHOD menu appears
on the TV screen. Press CURSOR M/
m to select STANDARD, then press
OK.
CURSOR
SELECT
SET
:
OK
: OK
EXIT : MENU
• When you set TIMER OPTIONS to
STANDARD:
The TIMER menu appears on the TV
screen.
TIMER
2 8 . 9 THU
DATE
TIME
PROG.
– –
TODAY
SP / LP
LIST
– – : – – – – : – –
SP
VPS / PDC
OFF
SELECT
:
:
:
SET
CANCEL
CLEAR
EXIT : MENU
Set the date, start and stop times,
programme position, tape speed, and
VPS/PDC function:
2
TIMER
2 8 . 9 THU
CURSOR
DATE
. 1 0
TIME
1 0 : 0 0 1 1 : 3 0
PROG.
CDE
2
SP / LP
LIST
LP
VPS / PDC
ON
1 Press CURSOR , to highlight each
item in turn.
INPUT
SELECT
SELECT
:
:
:
SET
2 Press CURSOR M/m to set each item.
CANCEL
CLEAR
EXIT : MENU
To correct a setting, press CURSOR <
to return to that setting and reset it.
• To record the same programme every day or the same day every week,
see “Daily/weekly recording” on page 59.
STB
• To use the VPS/PDC function, set VPS/PDC to ON. For details about
the VPS/PDC function, see “Timer recording with VPS/PDC signals”
on page 55.
• To record from a decoder or other source connected to the LINE-1 (TV)
or LINE-4 IN connectors, the LINE-2 IN or the LINE-3 IN jacks, press
INPUT SELECT to display “L1,” “L2,” “L3”or “L4” in the “PROG.”
position.
1
4
7
2
5
8
0
3
6
9
• To record from the STB, press STB to display “STB---” in the PROG
position and enter a three digit number with the programme number
buttons.
Press MENU to exit the menu.
MENU
3
58 Setting the timer manually
Download from Www.Somanuals.com. All Manuals Search And Download.
Press ?/1 to turn off the VCR.
4
The indicator appears in the display window and the VCR stands by for
recording.
To record from a decoder or other sources, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 2 above, press CURSOR m to select the recording pattern. Each time you
press CURSOR m, the indication changes as shown below. Press CURSOR M to
change the indication in reverse order.
TODAY t SUN-SAT (Sunday to Saturday) t MON-SAT (Monday to
Saturday) t MON-FRI (Monday to Friday) t SAT (every Saturday) .....
t MON (every Monday) t SUN (every Sunday) t 1 month later
t (dates count down) t TOMORROW t TODAY
Tips
•
To set the programme position, you can also use the PROG +/– or programme number
buttons.
•
•
To set the tape speed, you can also use the SP/LP button.
When you are recording a programme in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to the LP mode.
Note that some interference will appear on the picture at the point the tape speed is changed.
If you want to keep the same tape speed, set AUTO LONG PLAY to OFF in the TAPE
OPTIONS menu (see page 72).
•
Even if you set TIMER OPTIONS to VIDEO Plus + in the OTHER OPTIONS menu, you
can set the timer manually. Press MENU to select TIMER, then go to step 2.
Notes
•
When setting the timer with VPS/PDC signals, enter the start and stop times exactly as
indicated in the TV programme guide, otherwise the VPS/PDC function won’t work and the
recording won’t start.
•
•
•
If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC
signals, the VCR will start recording at the set time without using the VPS/PDC function.
The VPS/PDC function is automatically set to OFF for the timer recording of a satellite
programme.
The
indicator flashes in the display window when you press ?/1 with no tape inserted.
Setting the timer manually 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Operations
Playing/searching at various speeds
1
4
7
2
5
8
0
3
6
9
M FF
JOG
H
m REW
m
M
Shuttle ring
Playback options
Operation
During stop, press MFF or mREW.
Fast-forward or rewind
View the picture during fast-
forward or rewind
During fast-forward, hold MFF down. During rewind, hold mREW
down.
Rewind and start play
During stop, hold m (rewind) down on the VCR and press H
(playback) on the VCR then release both.
60 Playing/searching at various speeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the shuttle ring
With the shuttle ring, you can operate a variety of playback options. There are two
ways for using the shuttle ring, normal mode and jog mode.
To use the shuttle ring in normal mode.
During playback or pause, turn the shuttle ring clockwise or anticlockwise. Each
change in the shuttle ring position changes the playback mode, and the corresponding
mark appears on the TV screen for a few seconds in the following way if the on-
screen display function is on :
Double speed
High speed
Normal speed
(Initial speed)
Playback mode:
X 2
Mark on the TV screen:
Slow motion
in reverse
Pause
Slow motion
High speed
in reverse
Normal speed
in reverse
X 1
Doublespeed
in reverse
X 2
_
_
To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enter the jog mode. The JOG button lights up. If you change to the jog
mode during any playback mode, the playback pauses so you can see a still picture.
Each change in the shuttle ring position shifts the picture one frame. To shift frames
in reverse, turn the shuttle ring anticlockwise. The frame shift speed depends on the
speed you turn the shuttle ring. To resume normal mode, press JOG again. The JOG
button turns off.
To resume normal playback
Press H (playback).
Tip
•
Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both TRACKING buttons (+/–) at the same time.
Notes
•
•
•
The playback sound is muted during the operations in the above table.
In the LP mode, noise may appear or there may be no colour.
If the playback mode mark doesn’t appear on the TV screen, press
DISPLAY.
Playing/searching at various speeds 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the recording duration time
After you start recording in the normal way,
you can have the VCR stop recording
automatically after a specified duration.
z REC
While recording, press z REC.
1
The
indicator appears in the display window.
SP
VIDEO
PDC
Press z REC repeatedly to set the duration.
2
Each press advances the time in increments of 30 minutes.
Normal recording
0:30
1:00
5:30
6:00
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
To extend the duration
Press z REC repeatedly to set a new duration.
To cancel the duration
Press z REC repeatedly until the
indicator disappears and the VCR returns to
normal recording mode.
To stop recording
To stop the VCR while recording, press x STOP.
Note
•
You cannot display the current tape time in the display window when setting the recording
duration.
62 Setting the recording duration time
Download from Www.Somanuals.com. All Manuals Search And Download.
Synchronized Recording
You can set the VCR to automatically record programmes from equipment such as a
programmable Set Top Box by connecting the equipment to the LINE-4 IN
connector. The connected equipment must have a timer function for this feature to
work.
When the connected equipment turns on, the VCR also automatically turns on and
starts recording a programme from LINE-4 IN.
How to connect for Synchronized Recording.
Connect the LINE-4 IN of the VCR to the TV Scart connector of the Set-Top Box.
Then connect the LINE-1 (TV) connector to the TV.
Scart cable (not supplied)
TV Scart connector
Programmable
Set -Top Box
i LINE-1
t LINE-4 IN
(TV)
Scart (EURO-AV)
Scart cable (not supplied)
: Signal flow
continued
Synchronized Recording 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording programmes using
the Synchronized Recording
function
Before you start…
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
1
4
7
2
5
8
0
3
6
9
INPUT
SELECT
PROG +/-
SYNCHRO REC
SP/LP
g
Set the timer on the STB to the time of the programme you want to record, then
1 turn it off.
Press SP/LP to select the tape speed on the VCR.
2
Hold down SYNCHRO REC for more than two seconds.
3 The SYNCHRO REC indicator lights up on the front panel and the VCR stands
by for recording.
The VCR automatically turns on and starts recording when it receives an input
signal from the STB.
The VCR automatically stops recording when the tape reaches the end or when
the STB stops transmitting an input signal.
To cancel the Synchronized Recording function
Press SYNCHRO REC. The SYNCHRO REC indicator turns off.
To stop recording
Press x STOP while recording.
Notes
•
•
This function may not work with some types of Set-Top Boxes.
If the settings for timer recording and Synchronized Recording overlap, the proramme that
starts first has priority and the second programmme starts recording only after the first
programme has finished.
•
The Auto Clock Set function does not work while the VCR stands by for Synchronized
Recording.
64 Synchronized Recording
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking/changing/cancelling timer
settings
Before you start…
?/1
• Turn on your TV and set it to the video
channel.
MENU
OK
CURSOR
M/m/</,
1
4
7
2
5
8
0
3
6
9
CLEAR
Press ?/1 to turn on the VCR.
1
2
Press MENU, then press CURSOR M/m to highlight LISTS and press OK.
continued
Checking/changing/cancelling timer settings 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CURSOR M/m to highlight TIMER LIST,
3 then press OK:
TIMER LIST
2 8 . 9 THU
VPS
DATE
TIME
PROG.
AAB
FGH
AAB
I J K
CDE
– –
PDC
TODAY
2 0 : 0 0 2 1 : 0 0
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
SP
LP
SP
LP
LP
–
MON
3 0 . 9
SUN
–
FRI
• If you want to change or cancel a setting, go
on to the next step.
• If you do not need to change or cancel the
settings, press MENU, then turn off the VCR
to return to recording standby.
6 : 3 0
7 : 0 0
VPS
PDC
2 . 1 0
1 0 : 0 0 1 1 : 3 0
– – . – –
– – . – –
– – . – –
RETURN
– : – –
– : – –
– : – –
– : – –
– : – –
– : – –
– –
–
– –
–
SELECT
SET
CANCEL
:
: OK
:
CLEAR
EXIT : MENU
Press CURSOR M/m to select the setting you
TIMER
4 want to change or cancel, then press OK.
2 8 . 9 THU
DATE
TIME
1 0 : 0 0 1 1 : 3 0
PROG.
CDE
2 . 10
SP / LP
LIST
The selected setting appears in the TIMER
menu.
SP
VPS / PDC
ON
SELECT
:
:
:
SET
CANCEL
CLEAR
EXIT : MENU
• To change the setting, press CURSOR </, to highlight the item you want
to change, and press CURSOR M/m to change it.
• To cancel the setting, press CLEAR.
5
6
Press MENU.
If any settings remain, turn off the VCR to return to recording standby.
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
Programme 1
Programme 2
about 20 seconds
will be cut off
Programme 1
Programme 2
about 20 seconds will be cut off
Tip
•
In step 5 above, you can check the TIMER LIST by selecting LIST and pressing OK. Press
MENU to exit the TIMER LIST.
66 Checking/changing/cancelling timer settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording stereo and bilingual
programmes
In NICAM system
This VCR receives and records stereo and bilingual programmes based on the
NICAM system (the NICAM indicator appears). When a stereo or bilingual
programme is received, the STEREO indicator appears in the display window.
To record a NICAM programme, HIFI AUDIO in the AUDIO OPTIONS menu
should be set to NICAM (initial setting). To check the menu setting, see page 73 for
details.
To select the sound while recording
Press AUDIO MONITOR to select the sound you want.
Stereo programme
To listen to
Stereo
On-screen display
STEREO
Display window
STEREO
Standard sound*
No indicator
No indicator
*
Usually the mixed sound of left and right channels (monaural)
Bilingual programme
To listen to
Main
On-screen display
MAIN
Display window
STEREO
Sub
SUB
STEREO
Main and sub
Standard sound*
MAIN/SUB
No indicator
STEREO
No indicator
*
Usually the main sound (monaural)
Selecting the sound during playback
Press AUDIO MONITOR to select the sound you want.
To listen to
On-screen display
Display window
Stereo/main and sub (left and STEREO
right channels)
STEREO
Left channel/main
Right channel/sub
Standard sound
LCH
STEREO
RCH
STEREO
No indicator
No indicator
continued
Recording stereo and bilingual programmes 67
Download from Www.Somanuals.com. All Manuals Search And Download.
How sound is recorded on a video tape
The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the
main track along with the picture. Monaural sound is recorded onto the normal audio
track along the edge of the tape.
Stereo
Bilingual
Usually mixed
left/right channels
Usually main sound
Normal audio track
(monaural)
Hi-fi audio track
(main track)
Stereo sound
(left/right channels)
Main (left channel)
Sub (right channel)
Notes
•
•
•
•
To listen to playback sounds in stereo, you must use the EURO-AV or AUDIO OUT
connections.
When you play a tape recorded in monaural, the sound is heard in monaural regardless of the
AUDIO MONITOR setting.
If the AUDIO MONITOR button does not function, check that AUDIO MIX in the AUDIO
OPTIONS menu is set to OFF (see page 73).
If HIFI AUDIO is set to STANDARD, the standard sound will be recorded on both the hi-fi
and normal audio tracks. Pressing AUDIO MONITOR will not change the sound.
68 Recording stereo and bilingual programmes
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching using the index function
The VCR marks the tape with an index signal
at the point where each recording begins. Use
these signals as references to find a specific
recording. The VCR can search up to 99
index signals ahead or behind the current
position.
1
4
7
2
5
8
0
3
6
9
./>
INDEX
SEARCH
Insert an indexed tape into the VCR.
1
Press ./> INDEX SEARCH repeatedly to
2 specify how many index signals ahead or behind
you want to search :
INDEX
SEARCH
2
• To search ahead, press > INDEX
SEARCH.
• To search backwards, press . INDEX
SEARCH.
The VCR starts searching and the index number
on the TV screen counts down to zero. Playback
starts automatically from that point.
To stop searching
Press x STOP.
Note
•
No index signal will be added when recording starts from recording pause. However, an
index signal will be marked if you change the programme position during recording pause.
Searching using the index function 69
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape (the indicator
flashes in the display window, then goes off),
distortion may occur if the tape was recorded in poor
condition. In this case, manually adjust the tracking.
During playback, press TRACKING +/– to display
the tracking meter. The distortion should disappear
as you press one of the two buttons (the indicator
lights up). To resume automatic tracking
TRACKING
Tracking meter
adjustments, eject the tape and re-insert it.
To set the tracking to the centre position, press
TRACKING + and – buttons at the same time.
About the Reality Regenerator (RR) function
The Reality Regenerator (RR) function automatically restores the picture to its
original quality during playback.
To use the RR function, press
REALITY REGENERATOR button.
The REALITY REGENERATOR
indicator lights up. You can set RR to
g
HIGH or NORMAL in the VIDEO
OPTIONS menu (see page 72).
To turn it off, press REALITY
REALITY REGENERATOR
REGENERATOR. The REALITY
REGENERATOR indicator lights off.
About the Optimum Picture Control (OPC) function
The Optimum Picture Control (OPC) function
automatically improves recording and playback
quality by adjusting the VCR to the condition of the
video heads and tape. To maintain better picture
VIDEO OPTIONS
OPC
ON
OFF
NORMAL
NORMAL
EDIT
SHARPNESS
RR
RETURN
quality, we recommend that you set OPC to ON in
the VIDEO OPTIONS menu (with the OPC
indicator in the display window lit). For details, see
page 72.
SELECT
SET
:
: OK
EXIT : MENU
OPC playback
The OPC function automatically works on all types of tapes, including rental tapes
and tapes that were not recorded with OPC.
70 Adjusting the picture
Download from Www.Somanuals.com. All Manuals Search And Download.
OPC recording
Whenever you insert a tape and start recording for the first time, the VCR adjusts to
the tape using the OPC function (the OPC indicator flashes rapidly). This adjustment
is retained until the tape is ejected.
To deactivate the OPC function
Set OPC to OFF in the VIDEO OPTIONS menu. The OPC indicator in the display
window turns off.
Notes
•
You can adjust the tracking for an NTSC-recorded tape but the tracking meter won’t be
displayed.
•
With the Auto Long Play function ON, the OPC function will work only in SP mode. If the
tape speed automatically switches from SP to LP, the OPC function turns off. However, if the
entire programme is recorded in LP mode, the OPC function will work.
•
There is a delay of about ten seconds before the VCR actually starts recording while the VCR
analyses the tape. To avoid the delay, first set the VCR to recording pause (the OPC indicator
flashes slowly) and press z REC to have the VCR analyse the tape (the OPC indicator
flashes rapidly) and return to recording pause. After the OPC indicator stops flashing, press
X PAUSE to start recording immediately. If you want to start recording quickly without
using the OPC function, first set the VCR to recording pause (the OPC indicator flashes
slowly) and press X PAUSE to start recording.
Adjusting the picture 71
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing menu options
Press MENU, then select OPTIONS and press
OPTIONS
1 OK.
VIDEO OPTIONS
AUDIO OPTIONS
TAPE OPTIONS
OTHER OPTIONS
RETURN
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m to highlight the kind of option to change, VIDEO
2 OPTIONS, AUDIO OPTIONS, TAPE OPTIONS or OTHER OPTIONS, then
press OK.
Press CURSOR M/m to select the option, then press OK to enter the pop up
3 menu.
Press CURSOR M/m to select the desired setting, then press OK.
4
Press MENU to exit the menu.
5
VIDEO OPTIONS menu
VIDEO OPTIONS
Initial settings are indicated in bold print.
OPC
ON
EDIT
OFF
SHARPNESS
RR
RETURN
NORMAL
NORMAL
SELECT
SET
:
: OK
EXIT : MENU
Menu option
Set this option to
OPC
• ON to switch on the OPC (Optimum Picture Control) function
and improve picture quality.
•
•
OFF to switch off OPC.
EDIT
ON to minimize picture deterioration when editing.
• OFF to turn off EDIT.
LOW to playback a poor quality tape.
• NORMAL to playback an average quality tape.
HIGH to playback a good quality tape.
• NORMAL for normal everyday use.
SHARPNESS
•
•
RR
•
HIGH for well-used video tapes such as rented tapes. Select this
option when NORMAL does not improve the picture quality.
For details, see page 70.
Note
•
When you playback with the EDIT function ON, the OPC and the SHARPNESS functions
don’t work.
72 Changing menu options
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO OPTIONS menu
Initial settings are indicated in bold print.
AUDIO OPTIONS
AUDIO MIX
HIFI AUDIO
RETURN
OFF
NICAM
SELECT
SET
:
: OK
EXIT : MENU
Menu option
Set this option to
AUDIO MIX
•
ON to listen to the hi-fi and normal audio tracks at the same
time. The AUDIO MONITOR button will not function.
• OFF to listen to the hi-fi and normal audio tracks separately.
Select the sound using the AUDIO MONITOR button.
For details, see page 67.
HIFI AUDIO
•
STANDARD to record standard sound on the hi-fi audio track.
• NICAM to record NICAM broadcasts on the hi-fi audio track.
For details, see page 67.
Note
•
If you eject the tape, AUDIO MIX is automatically set to OFF.
TAPE OPTIONS menu
Initial settings are indicated in bold print.
TAPE OPTIONS
AUTO LONG PLAY
TAPE LENGTH
RETURN
OFF
E180
SELECT
SET
:
: OK
EXIT : MENU
Menu option
Set this option to
AUTO LONG PLAY
•
ON to automatically record from SP (Standard Play) to LP
(Long Play) when the tape length is not long enough.
• OFF to normally record in SP (Standard Play).
TAPE LENGTH
• E180 to use an E-180 or shorter tape type.
•
•
•
E195 to use an E-195.
E240 to use an E-240.
E300 to use an E-300.
continued
Changing menu options 73
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER OPTIONS menu
OTHER OPTIONS
Initial settings are indicated in bold print.
BUZZER
DIMMER
ON
OFF
POWER SAVE
TIMER OPTIONS
TV DIRECT REC
RETURN
OFF
VARIABLE
ON
SELECT
SET
:
: OK
EXIT : MENU
Menu option
Set this option to
BUZZER
• ON to output a beep sound.
•
OFF to deactivate it.
DIMMER
•
ON to make the display window dim.
• OFF to make it brighter.
POWER SAVE
•
ON to turn off the indicators in the display window to save the
VCR power.
• OFF to turn on the indicators in the display window while the
VCR is standing by.
TIMER OPTIONS
• VARIABLE to display the TIMER METHOD menu for
selecting STANDARD or VIDEO Plus + when pressing the
TIMER button.
•
STANDARD to display only the TIMER menu when pressing
the TIMER button.
VIDEO Plus + to display only the VIDEO Plus + menu when
pressing the TIMER button.
•
For details, see page 52 and 57.
TV DIRECT REC
• ON to activate the TV Direct Rec function.
•
OFF to deactivate it.
Note
•
When you set a timer recording or a synchronized recording, the indicators in the display
window remain on, even though POWER SAVE is set to ON.
74 Changing menu options
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Connecting to a VCR or stereo system
How to connect to record on your VCR
Connect the line outputs of the other VCR to the LINE IN connector or jacks of your
VCR. Refer to the examples A and B and choose the connection that best suits your
VCR.
Example A
Your VCR (Recorder)
TV
t LINE-4 IN
Other VCR (Player)
Scart
(EURO-AV)
VMC-2121HG Scart cable (not supplied)
: Signal flow
Example B
TV
Your VCR (Recorder)
g
LINE-2 IN
Other VCR (Player)
LINE OUT
VMC-820 audio/video cable
(not supplied)
: Signal flow
continued
Connecting to a VCR or stereo system 75
Download from Www.Somanuals.com. All Manuals Search And Download.
How to connect to a stereo system
Connect the LINE-2 IN AUDIO L/R jacks on your VCR to the audio output jacks on
the stereo system using the RK-C510HG audio cable (not supplied).
Notes
•
•
•
Make sure you connect the plugs to jacks of the same colour.
If the other VCR is a monaural type, leave the red plugs unconnected.
If you connect your VCR to both the LINE IN and LINE OUT jacks of the other VCR, select
the input correctly to prevent a humming noise.
•
If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-2106HG cable
instead and connect the cable to the line out jacks of the other VCR.
Tip
•
You can also use the LINE-4 IN connector or the LINE-3 IN jacks instead.
76 Connecting to a VCR or stereo system
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Editing
z
(when recording on your VCR)
g
Before you start editing...
X
• Turn on your TV and set it to the video
channel. Press INPUT SELECT to display
“L2” (or “L3” or “L4”) in the display
window.
VIDEO OPTIONS
OPC
EDIT
ON
ON
NORMAL
NORMAL
SHARPNESS
RR
RETURN
• Press SP/LP to select the tape speed, SP or
LP.
SELECT
SET
:
: OK
• On your VCR, set EDIT to ON in the
VIDEO OPTIONS menu to display
“EDIT” in the display window. If the other
VCR has a similar feature, activate this one
as well.
EXIT : MENU
Insert a source tape with its safety tab removed into the other (playback) VCR.
1 Search for the point to start playback and set it to playback pause.
Insert a tape with its safety tab in place into your (recording) VCR. Search for
2 the point to start recording and press X (pause).
Press z (record) on your VCR to set it to recording pause.
3
To start editing, press the X (pause) buttons on both VCRs at the same time.
4
To stop editing
Press the x (stop) buttons on both VCRs.
Tip
•
To cut out unwanted scenes while editing, press X (pause) on your VCR when an unwanted
scene begins. When it ends, press X (pause) again to resume recording.
Note
If you start editing following the procedure above, the VCR won’t start recording with the
•
OPC function. To record a tape with the OPC function, press z (record) again during
recording pause in step 3 so the VCR analyses the tape. Then, press X (pause) after the
OPC indicator stops flashing to start recording. If you press X (pause) before the OPC
indicator stops flashing, the OPC function is cancelled.
Basic Editing 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio dubbing
This feature lets you record over the normal
audio track. The monaural sound previously
recorded is replaced while the original hi-fi
sound remains unchanged. Use this feature
to add commentary to a tape that you have
recorded with a camcorder.
CLEAR
Before you start…
• Turn on the TV and set it to the video
channel
1
4
7
2
5
8
0
3
6
9
AUDIO DUB
X PAUSE
Insert a source tape into the stereo system (or the playback VCR). Search for the
1 point to start playback and set it to playback pause.
Insert a prerecorded tape with its safety tab in place into your (recording) VCR.
2 Search for the end of the section to be replaced and press X PAUSE.
Press CLEAR to reset the counter to “0H00M00S.”
3
Rewind the prerecorded tape to the beginning of the section to be replaced.
4
The VCR enters pause mode.
Press AUDIO DUB.
5
The
indicator appears in the display window.
To start editing, press the X PAUSE buttons on your VCR and the stereo system
6 (or other VCR) at the same time.
When the counter reaches “0H00M00S,” audio dubbing stops automatically.
To stop while editing
Press x (stop) on this VCR and the stereo system (or other VCR).
78 Audio dubbing
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
•
After you use this feature, the audio in playback mode is automatically set to monaural.
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON in the AUDIO OPTIONS menu (see page 73). Use this
feature to listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is
set to ON, the AUDIO MONITOR button does not function. Note that by mixing both
hi-fi and normal audio, some echo may appear.
Remember to reset AUDIO MIX to OFF after playing the tape.
Note
•
If you eject the tape, AUDIO MIX is automatically set to OFF.
Audio dubbing 79
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartFile function
About the SmartFile function
SmartFile allows you to view the contents of your video tape (recording date,
channel, name etc.) on the TV screen. It is no longer necessary to rewind, fast-
forward, or playback a tape to find out what is recorded on it. You can also locate and
start playback of a specific programme or find the place from which you want to start
recording by using this list. Programme data is stored in the memory of the SmartFile
label attached to the tape.
The following functions are possible using SmartFile :
Recording using the SmartFile function (page 82)
To use the SmartFile function, attach the SmartFile
label to the tape. If you record a programme on a
tape with a SmartFile label, the contents will appear
on the SmartFile search list. With the SmartFile list,
you can also easily find the beginning of the
available recording space.
SmartFile search list
2 . 8 . 00 - 10 . 10 . 00
BLANK TIME
PAGE 1
SP 1H 55M
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
SP 0H 30M
30 .
FILMS
9
SAT
7 : 00 PROG .32
SP 1H 30M
START
SELECT
END
:
SEARCH : OK
EXIT : MENU
Selecting and playing a programme (page 87)
To playback a recorded programme, select the programme you want to watch using
the SmartFile search list. The VCR locates the programme and playback starts
automatically.
Checking the contents of a tape (page 88)
When you bring the SmartFile label close to the
SMARTFILE sensor on the VCR, a summary of
the recorded programmes appears in the SmartFile
check list. It is not necessary to insert the tape into
the VCR and press H PLAY to find out what is
g
recorded on it. This feature allows you to easily
find the programme you want to watch, or to
quickly find a tape with enough recording space.
SmartFile check list
2 . 8 . 00 - 10 . 10 . 00
PAGE 1
BLANK TIME
SP 1H 55M
10 . 10 SPORTS FESTIVAL
1 . 10 NEWS SEVEN
30 .
22 .
10 .
2 .
9
9
9
9
SAT
FRI 1 2 : 00 SARU
9 : 00
7 : 00 PROG .32
SUN
STB098
SAT 2 3 : 00 STB
NEXT
:
EXIT : MENU
80 About the SmartFile function
Download from Www.Somanuals.com. All Manuals Search And Download.
Labelling a recorded programme and tape (page 90)
You can attach an electronic "label" to the video tape and its programmes on the
SmartFile list. Labelling the recorded programmes enables you to find a programme
easily when you want to play it back. If TV guide pages are available in the Teletext,
recorded programmes are labelled automatically. Also, once you label a programme
which you set to record regularly (i.e everyday, same day of the week), the VCR
recognizes the label and will automatically label all future recordings of the same
programme.
Registering the contents of a recorded tape in the
SmartFile label (page 98)
You can register programmes recorded on a tape in the memory of a new SmartFile
label.
Protecting a recorded programme (page 100)
You can protect a recorded programme from accidental over-recording or erasure.
Erasing the data of an unwanted programme (page 102)
By erasing a programme from the SmartFile list, the VCR will record over the
unwanted programme.
Running a demonstration
This VCR can give a demonstration
g
of the various SmartFile functions.
To run a demonstration, turn on the
VCR and hold the SMARTFILE
SMARTFILE
button for 3 seconds while no tape is
inserted. To stop the demonstration,
press any key.
About the SmartFile function 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording using the SmartFile function
To use the SmartFile function, attach the SmartFile label to the spine of the cassette.
If you record a programme for more than 20 minutes in LP mode and 11 minutes in
SP mode on a tape with a SmartFile label, programme data, such as the name, date
and channel, is automatically stored in the memory of the SmartFile label. Some
stations may not offer this service.
Attaching the SmartFile label to the cassette
To use the SmartFile function, attach the supplied
SmartFile label to the cassette. Remove any stains
or dirt from the surface of the spine of the tape.
Then, holding both edges of the SmartFile label so
that it doesn’t bend, attach it along the guide line
to the spine of the cassette. This tape is henceforth
SMARTFILE SENSOR
referred to as a SmartFile tape.
Note on the purchase of SmartFile labels
•
If you want to order additional SmartFile labels, contact your nearest Sony service facility.
Notes
•
The SmartFile label is equipped with a memory chip. The memory chip may be damaged and
cannot be used when you:
- twist or fold the SmartFile label.
- remove the SmartFile label and re-attach it to a tape.
- attach more than one SmartFile label to a tape.
- attach metal, or sticker which has metal, to the SmartFile label.
- write too strongly on the SmartFile label using a ballpoint pen or similar sharp instrument.
- disassemble or remodel a label.
•
•
Do not leave the SmartFile label in a place subject to excessive dust or dirt, direct sunlight,
humidity, mildew, strong magnetism or near heat sources.
If you attach the SmartFile label to a tape shorter than an E-30, the SmartFile function may
not work correctly.
82 Recording using the SmartFile function
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a programme on the SmartFile tape
When recording a programme on the
SmartFile tape, no matter what method you
use to record the programme (normal
recording, Video Plus+ recording, etc.),
programme data (date, name, channel,
recording start time , etc.) is stored in the
memory of the SmartFile label. The
SmartFile label can contain data for up to 12
programmes. When the number of stored
programmes goes over 12, the oldest
programme data is erased from the
SmartFile list. However, a programme
which lasts less than about 20 minutes in LP
mode or about 11 minutes in SP mode
cannot be stored in the memory. When you
record a programme on a SmartFile tape
which already contains programme data,
see “Recording after locating the Blank
Time space” on page 85.
OK
SMARTFILE
CURSOR
M/m/</,
1
4
7
2
5
8
0
3
6
9
Before you start…
• Turn on your TV and set it to the video channel
• Check that the VCR clock is set to the correct time and date.
Insert a SmartFile tape with its safety tab in place.
1 The SmartFile indicator lights up.
Press SMARTFILE.
PAGE 1
SP 1H 55M
2 The SmartFile search list appears on the TV
BLANK TIME
screen.
START
END
Use CURSOR M to select BLANKTIME and press OK. The VCR starts
3 searching for the longest blank part of the tape. The SmartFile search list
disappears.
You can now start recording a programme.
Tip
•
You can protect a recorded programme from accidental over-recording or erasure (see page
100).
Note
If you press the PAUSE button one or more times during recording, thereby creating short
•
lengths of recorded time between such pauses, programme data may not be stored in the
SmartFile label.
continued
Recording using the SmartFile function 83
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the information of a recorded programme
Press SMARTFILE. The SmartFile search list appears. The recording day of the
week, start time, programme position, date, name, recording time and tape speed
appear on the list.The longest space which doesn’t have any programme data (Blank
Time space) appears as "BLANK TIME":
Initial and latest dates of
use for this SmartFile tape
Recording start time
2 . 8 . 00 - 10 . 10 . 00
BLANK TIME
PAGE 1
SP 1H 55M
Remaining time
Programme position *
Date
30 .
9
SAT
7 : 00
CCB
SP 1H 30M
Day of the week
Recording time
Tape speed
Estimated position
of the recorded
programme
START
END
SELECT
:
SEARCH : OK
EXIT : MENU
Station name*
* When the station name is not available, the programme position is displayed
instead.
Tip
•
You can manually name a recorded programme and select the category. You can also name
the SmartFile tape.
Notes
•
If you don’t set the clock or the clock isn’t set to the correct time and date, the recording start
time won’t be stored correctly on the Smartfile list. Also, the programme label won’t be
stored correctly if the TV guide page information of Teletext is not set correctly (see page
91).
•
•
When you set the AUTO LONG PLAY option to ON in the TAPE OPTIONS menu, and the
tape speed automatically changes from SP to LP during recording, the VCR displays the
entire recording time converted to SP mode in the SmartFile list.
The recording time length in the SmartFile list is an estimation and may be slightly different
from the actual recorded time length.
84 Recording using the SmartFile function
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording after locating the Blank Time space
The SmartFile function identifies not only
the largest amount of available blank space,
but also recorded material that doesn’t have
corresponding programme data stored in the
SmartFile label. The longest available
OK
recording space (including programmes that
are not stored on the SmartFile label) is
SMARTFILE
CURSOR
M/m/</,
1
4
7
2
5
8
0
3
6
9
referred to as "Blank Time space". You can
locate the beginning of the Blank Time
space for recording. If there is a recorded
programme after the Blank Time space, the
VCR will record over on that programme
unless you stop recording. If there is a
programme you want to prevent from being
recorded over or erased, protect that
SP/LP
programme before you start recording
another programme see page 100.
Before you start…
• Turn on your TV and set it to the video
channel.
Insert a SmartFile tape with its safety tab in place.
1 The SMARTFILE indicator lights up on the VCR.
Press SMARTFILE.
2 . 8 . 00 - 10 . 10 . 00
BLANK TIME
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
SP 0H 30M
PAGE 1
SP 1H 55M
2 The SmartFile search list appears on the TV
screen. The Blank Time space appears in the
"BLANK TIME" row.
The Blank Time space also appears in the
display window.
30 .
FILMS
9
SAT
7 : 00 PROG .32
SP 1H 30M
START
SELECT :
END
SEARCH : OK
EXIT : MENU
Press CURSOR M repeatedly to select BLANK TIME.
3
4
Press SP/LP to select the tape speed, SP or LP.
2 . 8 . 00 - 10 . 10 . 00
BLANK TIME
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
SP 0H 30M
PAGE 1
LP 3H 50M
The BLANK TIME changes according to the
selected tape speed. Select a tape speed that
matches the length of the programme you want
to record.
30 .
FILMS
9
SAT
7 : 00 PROG .32
SP 1H 30M
START
SELECT
END
:
SEARCH : OK
EXIT : MENU
continued
Recording using the SmartFile function 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Press OK.
2 . 8 . 00 - 10 . 10 . 00
PAGE 1
5
The VCR goes to the beginning of the Blank
Time space and stops.
NOW SEARCHING
START
END
Press PROG +/– to select the programme position you want to record.
6
7
Press z REC to start recording.
Notes
•
You may not be able to locate the beginning of the Blank Time space correctly in the step 4
above when :
- the SmartFile tape contains one or more short length (less than about 20 minutes in the LP
mode and about 11 minutes in the SP mode) programmes for which programme data is not
stored in the SmartFile label.
- the SmartFile tape is damaged or dirty.
- the SmartFile tape has a portion recorded in the NTSC system.
•
If a newly recorded programme overlaps a stored programme, the stored programme
information is erased from the SmartFile list as shown below when :
- the remaining length of the stored programme becomes less than about 20 minutes in the LP
mode and about 11 minutes in the SP mode.
- the stored programme is over-recorded for more than 20 minutes in the LP mode and about
11 minutes in the SP mode.
necessary portion
unnecessary portion
Stored programme
Newly recorded
programme
or
or
20 minutes in the LP mode
11 minutes in the SP mode
86 Recording using the SmartFile function
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and playing a programme
You can automatically locate and start
playback of a programme recorded on the
SmartFile tape. Select a programme in the
SmartFile search list. The SmartFile search
list can contain up to 12 programmes.
OK
SMARTFILE
CURSOR
M/m/</,
1
4
7
2
5
8
3
6
9
Before you start…
• Turn on your TV and set it to the video channel.
Insert a SmartFile tape.
1 The SMARTFILE indicator lights up on the VCR.
Press SMARTFILE.
2 . 8 . 00 - 10 . 10 . 00
BLANK TIME
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
SP 0H 30M
PAGE 1
SP 1H 55M
2 The SmartFile search list appears on the TV
screen.
30 .
FILMS
9
SAT
7 : 00 PROG .32
SP 1H 30M
START
SELECT :
END
SEARCH : OK
EXIT : MENU
Press CURSOR M/m to select a programme.
2 . 8 . 00 - 10 . 10 . 00
BLANK TIME
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
SP 0H 30M
PAGE 1
3
SP 1H 55M
Press CURSOR M/m repeatedly to turn the
pages.
30 .
FILMS
9
SAT
7 : 00 PROG .32
SP 1H 30M
START
SELECT
END
:
SEARCH : OK
EXIT : MENU
Press OK.
4
The VCR starts searching for the beginning of the selected programme.
Playback starts automatically from that point.
To stop searching
Press x STOP.
Note
•
You may not be able to locate the beginning of the selected programme correctly when :
- the SmartFile tape contains one or more short length (less than about 20 minutes in the LP
mode and about 11 minutes in SP mode) programmes for which programme data is not stored
in the SmartFile label.
- the SmartFile tape is damaged or dirty.
- the SmartFile tape has a portion recorded in the NTSC system.
Selecting and playing a programme 87
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the contents of a tape
You can display the programme data list of
a SmartFile tape on the TV screen. It is not
necessary to insert the tape into the VCR.
This feature allows you to quickly find a
specific programme or to find a tape with
enough recording space. The SmartFile
check list can contain up to 12 programmes.
SmartFile sensor
g
Before you start…
• Turn on your TV and set it to the video
CURSOR M/m
channel.
• Turn on your VCR.
Hold the label side of the SmartFile tape close to
1 the SmartFile sensor.
Slowly bring the center of the label within 3 cm
of the SmartFile sensor.
g
There is a short beep, the SMARTFILE indicator
lights up on the VCR, and the SmartFile check
list appears. The BLANK TIME space also
appears in the display window.
2 . 8 . 00 - 10 . 10 . 00
BLANK TIME
10 . 10 SPORTS FESTIVAL
1 . 10 NEWS SEVEN
PAGE 1
SP 1H 55M
30 .
22 .
10 .
2 .
9
9
9
9
SAT
FRI 1 2 : 00 SARU
9 : 00
7 : 00 PROG .32
SUN
STB098
SAT 2 3 : 00 STB
NEXT
:
EXIT : MENU
AUTO SET UP
SMARTLINK SPEP
OPC
LP
STEREO
TV NICAM
VIDEO
VPS
PDC
DNR
BL
EDIT
H
M
S
Press CURSOR M/m to turn the pages.
2 . 8 . 00 - 10 . 10 . 00
BLANK TIME
PAGE 2
2
3
SP 1H 55M
31 .
2 .
8
8
24HOURS TV
GOLF
BACK
:
EXIT : MENU
Press MENU to exit the SmartFile check list.
88 Checking the contents of a tape
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
If you press any button other than SP/LP or CURSOR M/m, the SmartFile check list
disappears.
•
Notes
•
You cannot display the SmartFile check list while :
- you display the SmartFile list of a different SmartFile tape inserted into the VCR.
- you display any other menu.
•
•
If the SmartFile check list doesn’t appear on the TV screen, try drawing the SmartFile tape at
least 5 cm away from the SmarFile sensor, then bring it back to within 3 cm of the sensor.
The menu disappears automatically if you don’t proceed for more than a few minutes.
Checking the contents of a tape 89
Download from Www.Somanuals.com. All Manuals Search And Download.
Labelling a recorded programme and tape
Some broadcast systems ensure a Teletext
service in which the complete programmes
Tape title
and their data (title, date, channel, recording
MY VIDEO TAPE
BLANK TIME
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
PAGE 1
SP 1H 55M
start time etc.) are stored day by day. A TV
guide page corresponds to each day of the
week. When recording a programme, the
VCR automatically takes the label
information from the Teletext pages and
stores it in the SmartFile label. The TV guide
page numbers depend entirely on the
broadcast itself and may be subject to
change. If so, you may have to set those TV
guide page numbers manually in the TV
GUIDE PAGE menu.
Category
Programme
label
START
SELECT
END
:
SEARCH : OK
EXIT : MENU
Setting the TV guide page number
Before you start…
• Turn on your TV and set it to the video
channel.
MENU
OK
CURSOR
M/m/</,
1
2
5
8
0
3
6
9
Programme
number
buttons
4
7
CLEAR
PROG +/–
90 Labelling a recorded programme and tape
Download from Www.Somanuals.com. All Manuals Search And Download.
Select the programme position for which you want to set or change the TV guide
1 page.
Press MENU, then press CURSOR M/m to highlight SETTINGS and press OK.
2
Press CURSOR M/m to highlight TV GUIDE
SETTINGS
3 PAGE and press OK.
SET - TOP BOX
TUNER
CLOCK
LANGUAGE
TV GUIDE PAGE
RETURN
• The TV guide page numbers appear
automatically when the VCR detects them
(P301).
SELECT
SET
:
• If the VCR does not detect them (P---), you
have to set the appropriate TV guide page
number manually.
: OK
EXIT : MENU
PROG . 5
TV GUIDE PAGE
SUN
MON
TUE
WED
THU
FRI
P - - -
P - - -
P - - -
P - - -
P - - -
P - - -
P - - -
SAT
SELECT
SET
:
: OK
EXIT : MENU
Press CURSOR M/m to select the TV guide
4 page number you want to modify and press OK.
TV GUIDE PAGE
PROG . 5
SUN
MON
TUE
WED
THU
FRI
P - - -
P - - -
P - - -
P - - -
P - - -
P - - -
SAT
SET
:
0–9
CONFIRM : OK
CANCEL
:
CLEAR
EXIT : MENU
Press the programme number buttons to enter
5 the TV guide page number and press OK to
TV GUIDE PAGE
PROG . 5
SUN
MON
TUE
WED
THU
FRI
P 3 0 1
confirm the setting.
P - - -
P - - -
P - - -
P - - -
P - - -
P - - -
If you make a mistake, press CLEAR to re-enter
the correct number.
SAT
SELECT
SET
:
: OK
EXIT : MENU
To set or change another TV guide page number, repeat steps 3 and 4 above.
Press MENU to exit the menu.
6
7
continued
Labelling a recorded programme and tape 91
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
In step 4 above, enter "000" if you don’t want to use the TV guide page number for automatic
labelling. The VCR will instead store default data (date, programme position, duration etc.)
in the label.
•
•
•
Refer to the Teletext information on your TV screen to get the TV guide page number with
the programme titles and their start times.
If the Teletext TV guide has a page which always shows the programmes for the current day,
this page should be input for all days.
If you start recording more than two minutes before the programme is scheduled to start, the
correct label information may not be transferred. The VCR receives the label information two
minutes after the recording starts.
•
•
•
If you set a timer recording with VPS/PDC OFF, the title information will be transferred in
the middle of the recording.
Note that this function may not work correctly with programmes broadcast from some
stations.
If the Broadcast system updates the Teletext information at the moment recording starts, the
title on the label may not correspond to the one of the recorded programme. In this case, you
may have to manually enter the correct title using the SMARTFILE EDIT menu.
•
You cannot get the label information from sources connected to the LINE input or the
satellite channels.
92 Labelling a recorded programme and tape
Download from Www.Somanuals.com. All Manuals Search And Download.
Labelling a recorded programme manually
If Teletext data is not available, label and
select the appropriate category of the
recorded programme manually. Labelling
manually takes priority over labelling
automatically. You can also label the tape.
Up to 18 characters can be input for a
MENU
OK
programme and tape label.
CURSOR
M/m/</,
1
2
5
8
0
3
6
9
4
7
CLEAR
Before you start…
• Turn on your TV and set it to the video channel.
Insert a SmartFile tape.
1
The SMARTFILE indicator lights up on the VCR.
Press MENU and select SMARTFILE EDIT,
SMARTFILE EDIT
2 then press OK.
PAGE 1
2 . 8 . 00 - 10 . 10. 00
10 . 10 SPORTS FESTIVAL
SPORTS
1 . 10 NEWS SEVEN
SP 1H 30M
CCB
SP 1H 30M
The SMARTFILE EDIT menu appears.
30 .
FILMS
9
SAT
7 : 00 PROG .32
SP 1H 30M
SELECT
CATEGORY
TITLE
:
:
:
EXIT : MENU
Press CURSOR M/m to select a programme.
SMARTFILE EDIT
3
PAGE 1
2 . 8 . 00 - 10 . 10. 00
10 . 10 SPORTS FESTIVAL
SPORTS
1 . 10 NEWS SEVEN
SP 1H 30M
CCB
SP 1H 30M
30 .
FILMS
9
SAT
7 : 00 PROG .32
SP 1H 30M
SELECT
CATEGORY
TITLE
:
:
:
EXIT : MENU
continued
Labelling a recorded programme and tape 93
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CURSOR ,.
4
5
SMARTFILE EDIT
PAGE 1
2 . 8 . 00 - 10 . 10. 00
The cursor moves to the programme label input
position.
10 . 10 SPORTS FESTIVAL
SPORTS
1 . 10 NEWS SEVEN
SP 1H 30M
CCB
SP 1H 30M
30 .
9
FILMS
SP 1H 30M
SELECT
BACK
CONFIRM
:
:
NEXT
:
: OK
EXIT : MENU
Label the programme.
SMARTFILE EDIT
PAGE 1
2 . 8 . 00 - 10 . 10. 00
1 Press CURSOR M/m to select a character.
Each time you press CURSOR M, the
character changes as shown below.
At Bt ... t Z t special characters t
! t& t, (comma) t - (hyphen) t .
(period) t 0 t 1 ... t9 t(blank space)
You can also select a blank space by pressing
CLEAR.
10 . 10 SPORTS FESTIVAL
SPORTS
CCB
SP 1H 30M
1 . 10 NEWS SEVEN
SP 1H 30M
SP 1H 30M
30 .
9
N
FILMS
SELECT
BACK
CONFIRM
:
:
NEXT
:
: OK
EXIT : MENU
2 To set the next character, press CURSOR,.
SMARTFILE EDIT
PAGE 1
The cursor moves to the next position.
2 . 8 . 00 - 10 . 10. 00
10 . 10 SPORTS FESTIVAL
SPORTS
1 . 10 NEWS SEVEN
SP 1H 30M
CCB
SP 1H 30M
3 Repeat steps 1 and 2 to label the programme.
30 .
9
N
FILMS
SP 1H 30M
SELECT
BACK
CONFIRM
:
:
NEXT
:
: OK
EXIT : MENU
Press OK.
SMARTFILE EDIT
6
7
PAGE 1
2 . 8 . 00 - 10 . 10. 00
10 . 10 SPORTS FESTIVAL
SPORTS
CCB
SP 1H 30M
1 . 10 NEWS SEVEN
SP 1H 30M
SP 1H 30M
30 .
9
NICK & MATT
FILMS
SELECT
CONFIRM
:
: OK
EXIT : MENU
Press CURSOR M/m to select a category.
SMARTFILE EDIT
PAGE 1
2 . 8 . 00 - 10 . 10. 00
10 . 10 SPORTS FESTIVAL
Each time you press CURSOR M, the category
changes as shown below.
SPORTS
1 . 10 NEWS SEVEN
SP 1H 30M
CCB
SP 1H 30M
30 .
9
NICK & MATT
SHOW
SP 1H 30M
SPECIAL t FILMS t NEWS t SHOW
SPORTS t CHILDREN t MUSICt
ARTS t SERIES t EDUCATION t
LEISURE t SHOPPING t VARIETY t
(blank)
SELECT
:
CATEGORY
TITLE
:
:
EXIT : MENU
Press OK.
8
The programme label and a selected category are stored.
94 Labelling a recorded programme and tape
Download from Www.Somanuals.com. All Manuals Search And Download.
Press MENU to exit the menu.
9
To erase the programme label
Press CLEAR after step 3 above. The programme label is erased and the default
recording data reappears.
To erase the selected category
Press CLEAR in step 7 above. The selected category is erased and the space becomes
blank.
To label a regularly scheduled timer-recorded programme
Once you label a programme which is set to record regularly (i.e everyday, same day
of the week) in the Video Plus+ system or timer recording mode, the VCR recognizes
the label and will automatically label all future recordings of the same programme.
The set label is assigned even when an information signal containing a different
programme name, category name or other information is broadcast with the
programme. However, if you change the programme label and the category several
times, the VCR may automatically assign the set label only to the last recorded
programme for which the programme label and category were changed.
continued
Labelling a recorded programme and tape 95
Download from Www.Somanuals.com. All Manuals Search And Download.
Labelling a tape
MENU
OK
CURSOR
M/m/</,
1
4
7
2
5
8
0
3
6
9
CLEAR
Before you start…
• Turn on your TV and set it to the video channel.
Insert a SmartFile tape.
1
The SMARTFILE indicator lights up on the VCR.
Press MENU and select SMARTFILE EDIT,
SMARTFILE EDIT
2 then press OK.
PAGE 1
2 . 8 . 00 - 10 . 10. 00
10 . 10 SPORTS FESTIVAL
SPORTS
1 . 10 NEWS SEVEN
SP 1H 30M
CCB
SP 1H 30M
The SMARTFILE EDIT menu appears.
30 .
9
NICK & MATT
SHOW
SP 1H 30M
SELECT
CATEGORY
TITLE
:
:
:
EXIT : MENU
Press CURSOR M to select the tape title.
SMARTFILE EDIT
3
PAGE 1
2 . 8 . 00 - 10 . 10. 00
10 . 10 SPORTS FESTIVAL
SPORTS
1 . 10 NEWS SEVEN
SP 1H 30M
CCB
SP 1H 30M
30 .
SHOW
9
NICK & MATT
SP 1H 30M
SELECT
TITLE EDIT
:
:
EXIT : MENU
96 Labelling a recorded programme and tape
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CURSOR ,.
SMARTFILE EDIT
4
5
PAGE 1
The cursor moves to the title input position.
10 . 10 SPORTS FESTIVAL
SPORTS
1 . 10 NEWS SEVEN
SP 1H 30M
CCB
SP 1H 30M
30 .
9
NICK & MATT
SHOW
SP 1H 30M
SELECT
BACK
CONFIRM
:
:
NEXT
:
: OK
EXIT : MENU
Label the tape.
SMARTFILE EDIT
M
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
PAGE 1
1 Press CURSOR M/m to select a character.
Each time you press CURSOR M, the
SP 1H 30M
30 .
9
NICK & MATT
character changes as shown below.
SHOW
SP 1H 30M
At Bt ... t Z t special characters t
! t& t, (comma) t - (hyphen) t .
(period) t 0 t 1 ... t9 t(blank space)
SELECT
BACK
CONFIRM
:
:
NEXT
:
: OK
EXIT : MENU
You can also select a blank space by pressing CLEAR.
2 To set the next character, press CURSOR ,.
SMARTFILE EDIT
M
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
PAGE 1
The cursor moves to the next position.
3 Repeat steps 1 and 2 to label the tape.
SP 1H 30M
30 .
9
NICK & MATT
SHOW
SP 1H 30M
SELECT
BACK
CONFIRM
:
:
NEXT
:
: OK
EXIT : MENU
Press OK.
SMARTFILE EDIT
MY VIDEO TAPE
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
6 The tape title is stored.
PAGE 1
SP 1H 30M
30 .
9
NICK & MATT
SHOW
SP 1H 30M
SELECT
TITLE EDIT
:
:
EXIT : MENU
Press MENU to exit the menu.
7
To erase the tape title
Press CLEAR after step 3 above. The tape title is erased and the recording date
reappears. When you want to erase the recording date from the tape title column,
press CLEAR again.
Labelling a recorded programme and tape 97
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering the contents of a recorded
tape in the SmartFile label
The VCR will register programmes
recorded on a tape (even a non-SmartFile
recorded tape) in the memory of a new
SmartFile label by detecting the index
g
signals indicating the start of recorded
programmes. You can register up to the 12th
programme from the start of the tape. The
programmes appear from the bottom of the
screen as PROGRAM NO. 1, PROGRAM
NO.2, ... PROGRAM NO.12 in this order.
The 13th and subsequent programmes are
ignored. You can manually name the
registered programme numbers and select
the category (see page 90).
SMARTFILE GENERATOR
Before you start…
• Turn on your TV and set it to the video channel.
• Turn on your VCR.
Attach the SmartFile label to the spine of the
1 cassette as shown on the right and insert the
tape.
SMARTFILE SENSOR
Press the SMARTFILE GENERATOR button on
2 . 8 . 00 - 10 . 10 . 00
PAGE 1
2 the VCR.
SMARTFILE INDEXING IS
IN PROGRESS
A message appears indicating that the recorded
programmes are being registered. The index
signals are detected from the start of the tape,
and the registration stops when the end of the
tape is reached. The message disappears when
registration is complete.
START
END
To stop registration to the SmartFile label
Press SMARTFILE GENERATOR.
The data registered before the button is pressed remains in the SmartFile label. You
can register the programmes again by pressing SMARTFILE GENERATOR again.
98 Registering the contents of a recorded tape in the SmartFile label
Download from Www.Somanuals.com. All Manuals Search And Download.
To check the information of a registered programme
Press SMARTFILE.
The SmartFile search list appears. The registered programme number, registration
date and recording time appear in this list. Note that the registration date differs from
the recorded date.
Registration date
PAGE 1
MY VIDEO TAPE
15 . 11 PROGRAM NO.11
SP 0H 30M
15 . 11 PROGRAM NO.10
LP 2H 00M
15 . 11 PROGRAM NO.
SP 0H 45M
SP 1H 55M
Programme located in
a recorded tape
Recording time
9
Estimated position of the
registered programme
START
END
SELECT
:
SEARCH : OK
EXIT : MENU
Tips
•
The programmes recorded on the tape can be registered again in a SmartFile label that
already contains programme data. However, the recorded date and time, programme name
and information input manually (such as the programme label and category) are replaced
with "PROGRAM NO. XX".
•
If the SmartFile label contains stored programme data that includes protected programmes, a
message appears and the registration stops.
Notes
•
Programme data is not registered correctly in the SmartFile label when :
– the programme length is about 20 minutes or less in LP mode or about 11 minutes in SP
mode.
– the programme does not have an index signal or the index signal has been recorded over and
erased.
– the tape is damaged or dirty.
•
•
If you don’t set the clock or the clock isn’t set to the correct date, the registration date won’t
be stored correctly on the SmartFile list.
After you press SMARTFILE GENERATOR and start registration, registration is interrupted
if you press x STOP, H PLAY, M FF, m REW, ?/1 or ./> INDEX SEARCH.
In these cases as well, the data registered up to the point when registration was interrupted
remains in the SmartFile label.
•
•
When you set AUTO LONG PLAY to ON in the TAPE OPTIONS menu, and the tape speed
automatically changes from SP to LP during recording, the VCR displays the entire recording
time converted to SP mode in the SmartFile list.
The estimated position of the registered programmes may not be correct if many short
programmes are recorded on long tapes.
Registering the contents of a recorded tape in the SmartFile label 99
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting a recorded programme
You can protect a recorded programme from
accidental over-recording or erasure using
the SmartFile function.
When you start recording from a position
prior to the protected programme, the
recording stops automatically before the
protected programme.
CURSOR
M/m/</,
SMARTFILE
1
4
7
2
5
8
0
3
6
9
Before you start…
• Turn on your TV and set it to the video channel.
Insert a SmartFile tape.
MY VIDEO TAPE
BLANK TIME
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
PAGE 1
SP 1H 55M
1
The SMARTFILE indicator lights up on the
VCR.
SP 0H 30M
30 .
9
NICK & MATT
SHOW
SP 1H 30M
START
SELECT :
END
SEARCH : OK
EXIT : MENU
Press SMARTFILE.
2 The SmartFile search list appears on the TV screen.
Press CURSOR M/m to select the programme
MY VIDEO TAPE
BLANK TIME
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
PAGE 1
SP 1H 55M
3 you want to protect.
SP 0H 30M
30 .
9
NICK & MATT
SHOW
SP 1H 30M
START
SELECT
END
:
SEARCH : OK
EXIT : MENU
Press CURSOR,.
4 The
MY VIDEO TAPE
BLANK TIME
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
PAGE 1
indicator appears to the left of the
selected programme and the programme is now
protected.
SP 1H 55M
SP 0H 30M
30 .
9
NICK & MATT
SHOW
SP 1H 30M
START
SELECT
END
:
SEARCH : OK
EXIT : MENU
100 Protecting a recorded programme
Download from Www.Somanuals.com. All Manuals Search And Download.
Press SMARTFILE.
5
The SmartFile search list disappears.
To unlock the protected programme
Press CURSOR< in the 4 above. The indicator disappears and you can record
over this programme.
Tips
•
When you start recording from a position prior to the protected programme, the recording
automatically stops no more than about four minutes in SP mode and about eight minutes in
LP mode before the beginning of the protected programme. The BLANK TIME indicator
flashes in the display window.
•
•
If you protect a programme just after the Blank Time space, BLANK TIME is shortened by
about four minutes in SP mode and about eight minutes in LP mode.
If you try to record on a SmartFile tape containing a protected programme, a message
indicating that there is a protected programme on this tape appears on the TV screen.
Notes
•
•
When you record another programme just after a protected programme, locate the beginning
of the Blank Time space" by following the instructions in “Recording after locating the
Blank Time space‘ on page 85. Otherwise, if the recording start point overlaps the protected
programme, the VCR may over-record the protected programme.
If you insert a SmartFile tape which contains a protected programme or protect a programme
for the first time on a new tape, the VCR will analyse the position of the protected
programme for a few seconds. You cannot operate the VCR while the VCR is analysing the
tape.
•
•
•
If the SmartFile list contains 12 protected programmes, the next programme you record won’t
be stored in the SmartFile list.
When you try to turn off the VCR after setting a Video Plus+ or timer recording on the
protected programme, the VCR automatically ejects the cassette.
The protect function may not work with an NTSC-recorded tape.
Protecting a recorded programme 101
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing the data of an unwanted
programme
You can erase an unwanted programme
from the SmartFile list.
When you erase a programme from the list,
that portion of tape becomes Blank Time
space.
CURSOR
M/m/</,
SMARTFILE
1
4
7
2
5
8
0
3
6
9
CLEAR
DISPLAY
Before you start…
• Turn on your TV and set it to the video channel.
Insert a SmartFile tape.
MY VIDEO TAPE
BLANK TIME
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
PAGE 1
SP 1H 55M
1
The SMARTFILE indicator lights up on the
VCR.
SP 0H 30M
30 .
9
NICK & MATT
SHOW
SP 1H 30M
START
SELECT :
END
SEARCH : OK
EXIT : MENU
Press SMARTFILE.
2 The SmartFile search list appears on the TV screen.
Press CURSOR M/m to select a programme you
MY VIDEO TAPE
BLANK TIME
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
PAGE 1
SP 1H 55M
3 want to erase from the list.
SP 0H 30M
30 .
9
NICK & MATT
SHOW
SP 1H 30M
START
SELECT
END
:
SEARCH : OK
EXIT : MENU
102 Erasing the data of an unwanted programme
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CLEAR.
MY VIDEO TAPE
BLANK TIME
PAGE 1
SP 1H 55M
4
5
The selected programme is erased from the
SmartFile list.
10 . 10 SPORTS FESTIVAL
SPORTS
30 .
SHOW
CCB
NICK & MATT
SP 1H 30M
9
SP 1H 30M
If you erase a programme by mistake, press
DISPLAY to make the programme reappear.
START
SELECT
END
:
SEARCH : OK
EXIT : MENU
Press SMARTFILE.
The SmartFile search list disappears.
Notes
•
You cannot erase a protected programme from the SmartFile list. You have to first unlock the
protected programme by following the instructions in “To unlock the protected
programme‘ on page 101, then erase that programme from the list.
•
•
The erased programme disappears from the SmartFile list, but it still remains on the tape.
If the remaining length of a program is about 11 minutes or less in SP mode or about 20
minutes or less in LP mode, you cannot make the programme reappear by using the
DISPLAY button.
Erasing the data of an unwanted programme 103
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Troubleshooting
If you have any questions or if your problems are not covered below, please consult your nearest
Sony service facility.
Problem summary
The following table summarizes the reference numbers for the problems you might face. In
order to solve your problem, please refer to the corresponding reference (S1=symptom1,
S2=symptom2 ...) in the right column below.
CATEGORY
Picture
REFER TO
•
•
•
while watching broadcast tuned by the TV
while watching broadcast tuned by the VCR.
while playing a tape.
S2, S6
S1, S6
S3, S4, S5
Sound
•
while playing a tape.
S7, S8, S9
Functional
•
•
•
•
•
•
•
•
•
•
•
•
Playback
S4, S9, S10
S11, S12
S13, S14
S15, S16
S17, S18, S19
S20, S21
S22
Normal recording
SmartFile
Timer recording
Synchronized Recording
Remote commander
Cleaning
Clock
S23
Power
S24, S25, S26, S27, S28
S29, S30
S31
Tape
SMARTLINK
Set-Top Box control
S32, S33
104 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
S1
The VCR picture
does not appear on
the TV screen.
t
t
Make sure the TV is set to the video channel. If you are using a
monitor, set it to video input.
If the VCR is connected to the TV with a Scart cable, make sure the
TV/VIDEO indicator is lit in the display window. Use the TV/VIDEO
key on the remote commander to light the TV/VIDEO indicator.
t
If your VCR is connected to the TV with only an aerial cable, make
sure the TV is correctly tuned to the VCR (see page 18).
S2
S3
The TV programme
is not clear or has
some interference.
t
t
If your TV is connected to the VCR with both a Scart and an aerial
cable, make sure the RF channel is set to OFF (see page 18).
If your VCR is connected to the TV with only an aerial cable, make
sure the TV is correctly tuned to the VCR (see page 18).
The playback picture
is not clear or has
some interference.
t
t
If your TV is connected to the VCR with both a Scart and an aerial
cable, make sure the RF channel is set to OFF (see page 18).
Existing broadcasts may interfere with the VCR. Reset the RF
channel output of your VCR (see page 18).
t
t
Adjust the tracking with the TRACKING +/– buttons (see page 70).
The video heads are dirty (see below). Clean the video heads using
the Sony T-25CLD, E-25CLDR, or T-25CLW video head cleaning
cassette. If these cleaning cassettes are not available in your area,
have the heads cleaned at your nearest Sony service facility (a
standard service charge will be required). Do not use a commercially
available liquid type cleaning cassette other than Sony’s, as it may
damage the video heads.
t
t
The video heads may have to be replaced. Consult your local Sony
service facility for more information.
S4
S5
The tracking meter
does not appear on
the TV screen.
The recording condition of the tape is very poor and tracking cannot
be adjusted.
The picture rolls
vertically during
picture search.
t
Adjust the vertical hold control on the TV or monitor.
Symptoms caused by contaminated video heads
• Normal picture
• Rough picture
Unclear picture
• No picture (or
black & white
screen appears)
initial
contamination
terminal
continued
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
S6
TV reception is poor.
t
t
Make sure the aerial cables are connected securely.
Adjust the TV aerial.
Sound
S7
S8
The picture has no
sound.
t
t
The tape is defective. Please use a new tape.
The sound is
unstable or has an
echo.
When you play a tape with the same sound recorded on both the hi-fi
and normal sound tracks, make sure AUDIO MIX in the AUDIO
OPTIONS menu is set to OFF (see page 73).
S9
You cannot select the
left or the right
channel while
t
t
Make sure AUDIO MIX is set to OFF in the AUDIO OPTIONS menu
(see page 73).
Make sure you are playing a hi-fi tape.
playing a tape
Playback
S10 The tape starts
playing as soon as it
t
t
This is normal. When you insert a tape with no safety tab, the VCR
starts playing automatically.
is inserted.
Normal recording
S11 The tape is ejected
when you press z
REC.
The safety tab has been removed. To record on this tape, cover the tab
hole (see page 50).
S12 Nothing happens
when you press z
REC.
t
t
Make sure the tape is not at its end.
If the BL indicator is flashing in the display window, the tape
contains a programme protected by the SmartFile function (see page
100).
SmartFile
S13 The programme label
cannot be taken
t
t
Make sure the clock and the date are set correctly.
Check the setting of the TV guide pages. Some stations may not offer
this service (see page 90).
properly.
t
If you start recording more than two minutes before the beginning of
the programme, the title on the label may not correspond to the one of
the recorded programme. Manually enter the correct title using the
SMARTFILE EDIT menu (see page 93).
t
t
If the TV reception is poor, the VCR will not be able to take the title
correctly. Manually enter the correct title using the SMARTFILE
EDIT menu (see page 93).
S14 Recording stops
If the tape contains a programme protected by the SmartFile function,
recording automatically stops before the protected programme. Use
another tape which has enough recording space.
halfway.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer recording
S15 The timer does not
t
t
Check that the clock is set.
The clock stops if the VCR is disconnected from the mains for more
than an hour. Reset the clock and the timer.
operate properly.
t
t
Check that the safety tab has not been removed.
If the timer recording overlaps a programme protected by the
SmartFile function, the recording stops halfway (see page 100).
t
t
t
t
t
The starting point of the recording overlaps a protected programme.
Make sure the tape is not at its end.
Make sure a tape has been inserted.
Make sure the current time is not already past your timer settings.
If you are recording a programme from a set top box, make sure the
set top box is turned on.
S16 The VPS/PDC
function does not
operate properly.
t
t
Check that the clock and the date are set correctly.
Check that the VPS/PDC time you set is the correct one (there might
be a mistake in the TV guide programme). If the broadcast you
wanted to record did not send the correct VPS/PDC information, the
VCR will not start recording.
t
t
If the reception is poor, the VPS/PDC signal might be altered and the
VCR might not start recording.
Synchronized
Recording
S17 The SYNCHRO
REC indicator turns
off while recording
or does not go back
to recording standby
mode.
The tape has reached its end. Insert a new tape and press SYNCHRO
REC again.
S18 The Synchronized
Recording function
does not work.
t
The connected equipment was not turned off.
Turn off the connected equipment and press SYNCHRO REC again.
There was a power failure. Press SYNCHRO REC again.
t
t
S19 The programme
recorded with the
Synchronized
If the settings for timer recordings and Synchronized Recording
overlap, the programme that starts first has priority and the second
programme starts recording only after the first programme has
finished.
Recording function
is incomplete.
t
There was a power failure. Press SYNCHRO REC again.
Remote
commander
S20 The remote
commander does not
operate.
t
t
Make sure you are pointing the remote commander at the remote
sensor on the VCR.
Replace all of the batteries in the remote commander with new ones if
they are weak.
t
t
Make sure the TV/VIDEO remote control switch is set correctly.
Make sure the COMMAND MODE switch position of the VCR
matches the remote commander’s switch.
continued
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
commander
S21 You cannot control
t
t
Set your TV’s code number. The code number may change when you
replace the batteries for the remote commander (see page 9).
your TV.
Cleaning
S22 The VCR needs to be
Clean the cabinet, panel and controls with a dry, soft cloth, or a soft
cloth slightly moistened with a mild detergent solution. Do not use
any type of solvent, such as alcohol or benzene.
cleaned.
Clock
S23 The clock has
stopped and “–:– –”
lights up in the
t
t
The clock stops if the VCR is disconnected from the mains for more
than one hour. Reset the clock and timer if needed (see page 22).
display window.
Power
S24 The ?/1 ON/
STANDBY switch
does not function.
Connect the mains lead to the mains securely.
Power
S25 The power is turned
on but the VCR does
not operate.
t
t
t
t
Moisture condensation has occurred. Turn the power off, unplug the
mains lead and leave the VCR to dry for over three hours.
S26 The tape is ejected
when you press ?/1
ON/STANDBY.
You have set a timer recording, but the tape on which you want to
record is protected (or contains protected recordings). Unlock the
protection or use another tape or replace the safety tab (see page 101).
S27 The display is not lit
when the VCR is in
The VCR is in power save mode. Set the POWER SAVE option to
OFF in the OTHER OPTIONS menu (see page 74).
STANDBY mode.
S28 POWER SAVE is set
to ON but the display
remains lit in
The display is always lit if the VCR is in timer standby mode. For
more details regarding the energy saving function, see page 74.
STANDBY mode.
Tape
S29 The tape is ejected
when you press ?/1
ON/STANDBY.
t
t
You have set a timer recording, but the tape on which you want to
record is protected (or contains protected recordings). Unlock the
protection or use another tape or replace the safety tab (see page 101).
S30 A tape cannot be
Check that a tape isn’t already in the tape compartment.
inserted.
SMARTLINK
S31 The SMARTLINK
function does not
t
t
t
Check that your TV complies with SMARTLINK, NexTView Link,
MEGALOGIC, EASYLINK/CinemaLink, Q-Link or TV-LINK.
Make sure you use a 21-pin Scart cable to connect the VCR and your
TV.
Make sure the Scart cable is connected securely. Refer to your TV
manual for instructions.
work properly.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Set-Top Box
control
S32 The Set-Top Box
Control function
does not work
t
t
Be sure to point the VCR remote commander only at the VCR’s
remote sensor and not at the STB sensor.
Be sure the STB controller is pointing at the set top box’s remote
sensor receiver.
properly.
t
t
Make sure the STB controller is connected securely.
The STB tuner brand number may be deleted if you disconnect it
from the VCR. Re-enter the brand code number corresponding to your
set top box (see page 28).
S33 You cannot watch the
STB picture when
the VCR is in
t
Make sure the POWER SAVE option is set to OFF in the OTHER
OPTIONS menu (see page 74).
standby mode or z
REC standby mode.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Output signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
System
Channel coverage
AUDIO OUT, phono jack (2)
Rated output level: 327 mVrms
Load impedance: 47 kilohms
PAL (I)
UHF B21 to B69
RF output signal
Output impedance: less than 10 kilohms
UHF channels 21 to 69
Aerial out
General
75-ohm asymmetrical aerial socket
Tape speed
Power requirements
220 – 240 V AC, 50 Hz
SP: PAL 23,39 mm/s (recording/playback)
NTSC 33,35 mm/s (playback only)
LP: PAL 11,70 mm/s (recording/playback)
Power consumption
25 W (Normal)
2, 7 W (POWER SAVE is set to ON, no decoder)
Operating temperature
5°C to 40°C
NTSC
16,67mm/s (playback only)
EP: NTSC 11,12 mm/s (playback only)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Fast-forward and rewind time
Storage temperature
–20°C to 60°C
Dimensions
Approx. 1 min. (with E180 tape)
Approx. 430 × 100 × 330 mm (w/h/d)
including projecting parts and controls
Mass
Inputs and outputs
iLINE-1 (TV)
21-pin
Approx. 4.8 kg
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
t LINE-4 IN
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
SmartFile labels (10)
Set-Top Box controller (1)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
LINE-2 IN
Design and specifications are subject to change without
notice.
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input impedance : more than 47 kilohms
LINE-3 IN
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input impedance : more than 47 kilohms
LINE-2 OUT
VIDEO OUT, phono jack (1)
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to parts and controls
Refer to the pages indicated in parentheses ( ) for details.
Front panel
g
A ?/1 (on/standby) button/indicator (6)
B SMARTFILE button (81)
C SMARTFILE sensor (88)
D CURSOR M/m buttons (88)
E Tape compartment
N COMMAND MODE Switch (7)
O AUTO SET UP (21)/
RF (Radio Frequency) CHANNEL
button (18)
P m (rewind) /M (fast-forward)
buttons (46)
Q PROGRAM/TRACKING +/– buttons
F REALITY REGENERATOR (RR)
(18), (21), (70)
indicator (70)
R REALITY REGENERATOR button (70)
S SMARTFILE indicator (88)
T Remote sensor (5)
G SYNCHRO REC indicator (64)
H Z (eject) button (46)
I SYNCHRO REC button (64)
J H (playback) button (46)
K x (stop) button (46)
U OK button
V SMARTFILE GENERATOR button
W LINE-2 IN VIDEO/AUDIO L/R jacks
L X (pause) button (46)
(75)
M z (record) button (48), (77)
continued
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Display window
SMARTLINK SPEP
OPC
LP
STEREO
TV NICAM
STB
VIDEO
VPS
PDC
BL
EDIT
H
M
S
A Timer indicator (52), (57)
I TV indicator (51)
B VPS (Video Programme System)/PDC
(Programme Delivery Control) indicator
(55)
J STEREO indicator (67)
K NICAM indicator (67)
L Time counter/clock/line/programme
C Audio Dubbing indicator (78)
position indicator (18), (46), (49)
D OPC (Optimum Picture Control)
M Remaining time indicator (50)
N Tracking indicator (70)
indicator (70)
E SMARTLINK indicator (13)
F Tape speed indicators (49)
G VIDEO indicator (49)
H STB indicator (49)
O EDIT indicator (77)
P BL (Blank Time space) indicator (88)
Q Tape/recording indicator (49)
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
A Mains lead (11), (14)
F AERIAL IN
ANTENNE ENTREE connector (11),
(14)
B LINE-3 IN
AUDIO R (right)/L (left)/VIDEO
ENTREE LIGNE-3
G AERIAL OUT
AUDIO D/G/VIDEO
ANTENNE SORTIE connector (11),
(14)
C i LINE-1 (TV)
i LIGNE-1 (TV) connector (11)
H NTSC PB (Play Back) switch (45)
D t LINE-4 IN
I LINE-2 OUT
t ENTREE LIGNE-4 connector (15)
AUDIO R/L /VIDEO
SORTIE LIGNE-2
AUDIO D/G/VIDEO (17)
E STB CONTROL
CONTROLEUR STB jack (15)
continued
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote commander
A Z EJECT button (46)
B Menu buttons (6)
MENU button
CURSOR M/m/</, buttons
OK button
1
4
7
2
5
8
0
3
6
9
C
TIMER button (52), (57)
D AUDIO MONITOR button (6), (67)
E CLEAR button (45), (52), (65)
F AUDIO DUB button* (78)
G COUNTER/REMAIN button* (50)
H Fastext button*
I Fastext button*
J t TV/VIDEO button (6)
K
DISPLAY button (50)
L WIDE button (for TV) (7)
M SP (Standard Play)/LP (Long Play)
button (48)
N z REC (record) button (48), (62), (77)
O ./> INDEX SEARCH buttons
(69)
a TV power on/TV mode select button
(for TV) (6)
/ (Teletext) button (for TV) (6)
P m REW (rewind) button (46), (60)
Q M FF (fast-forward) button (46), (60)
R H PLAY button (46), (60)
S x STOP button (46), (62)
T Shuttle ring (60)
*
FASTEXT buttons (for TV)
114
Download from Www.Somanuals.com. All Manuals Search And Download.
U TV / VIDEO remote control switch (5)
V ?/1 (on/standby) button (6), (57)
W COMMAND MODE Switch (7)
X SMARTFILE button (83)
1
4
7
2
5
8
0
3
6
9
Y Programme number buttons (6), (26)
Z STB button (26)
wj–/– –(ten’s digit) button (6), (50)
wk INPUT SELECT button (49), (57)
wl PROG (programme) +/– buttons (6), (34)
(49)
c/C Teletext page access buttons (for
TV) (7)
e; 2 (volume) +/– buttons (for TV) (6)
ea JOG button (60)
es X PAUSE button (46), (61)
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu chart
This VCR is equipped with an on-screen indication system which allows you a visual, quick and easy
selection of the different menus. For a total view of all the menus, please refer to the following chart.
TIMER
2 8 . 9 THU
DATE
TODAY
TIME
2 0 : 0 0 2 1 : 0 0
PROG.
AAB
SP / LP
LIST
SP
VPS / PDC
OFF
CHANNEL LIST
SELECT
:
:
:
PROG
CH
NAME
AAB
CDE
LMO
SET
1
2
3
4
5
C
C
C
C
C
1 2
0 3
5 6
2 7
0 9
CANCEL
CLEAR
OPTIONS
TIMER
EXIT : MENU
FGH
LISTS
OPTIONS
LISTS
SELECT
MOVE PROGRAM
ERASE PROGRAM
:
:
:
SMARTFILE EDIT
SETTINGS
CLEAR
CHANNEL LIST
TIMER LIST
RETURN
EXIT : MENU
SELECT
SET
:
TIMER LIST
: OK
2 8 . 9 THU
EXIT : MENU
VPS
PDC
DATE
TIME
PROG.
TODAY
2 0 : 0 0 2 1 : 0 0
1 4 : 0 0 1 5 : 0 0
2 0 : 0 0 2 1 : 0 0
AAB
FGH
AAB
I J K
CDE
– –
SP
LP
SP
LP
LP
–
MON
3 0 . 9
SUN
–
FRI
SELECT
SET
:
6 : 3 0
7 : 0 0
VPS
PDC
: OK
2 . 1 0
1 0 : 0 0 1 1 : 3 0
EXIT : MENU
– – . – –
– – . – –
– – . – –
RETURN
– : – –
– : – –
– : – –
– : – –
– : – –
– : – –
– –
–
– –
–
SELECT
SET
CANCEL
:
: OK
OPTIONS
:
CLEAR
EXIT : MENU
VIDEO OPTIONS
AUDIO OPTIONS
TAPE OPTIONS
OTHER OPTIONS
RETURN
SELECT
SET
:
: OK
EXIT : MENU
SMARTFILE EDIT
MY VIDEO TAPE
PAGE 1
10 . 10 SPORTS FESTIVAL
SPORTS CCB SP 1H 30M
1 . 10 NEWS SEVEN
SP 1H 30M
30 .
9
NICK & MATT
SHOW
SP 1H 30M
SELECT
TITLE EDIT
:
:
EXIT : MENU
SETTINGS
SET - TOP BOX
TUNER
CLOCK
LANGUAGE
TV GUIDE PAGE
RETURN
SELECT
SET
:
: OK
EXIT : MENU
116 Menu chart
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO OPTIONS
OPC
EDIT
SHARPNESS
RR
RETURN
ON
OFF
NORMAL
NORMAL
SELECT
SET
:
: OK
EXIT : MENU
AUDIO OPTIONS
AUDIO MIX
HIFI AUDIO
RETURN
OFF
NICAM
SET - TOP BOX
STB CONNECTION
RETURN
OFF
RF
LINE2
LINE3
LINE4
SELECT
SET
:
: OK
EXIT : MENU
TAPE OPTIONS
SELECT
:
AUTO LONG PLAY
TAPE LENGTH
RETURN
OFF
E180
CONFIRM : OK
EXIT : MENU
TUNER
PROG.
AAB
1
CHANNEL SET
AFT
C
1 2
ON
FINE TUNING
RETURN
SELECT
SET
:
: OK
EXIT : MENU
OTHER OPTIONS
SELECT
SET
:
BUZZER
DIMMER
ON
OFF
: OK
EXIT : MENU
POWER SAVE
TIMER OPTIONS
TV DIRECT REC
RETURN
OFF
VARIABLE
ON
CLOCK
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
2 8 . 9 . 2 0 0 0
1
AAB
SELECT
SET
:
THU
1 8 : 0 0
: OK
EXIT : MENU
SELECT
:
CONFIRM : OK
EXIT : MENU
LANGUAGE
ENGLISH
NEDERLANDS
DANSK/NORSK
SVENSKA
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
PORTUGUÊS
SUOMI
EΛΛHNIKA
TÜRKÇE
SELECT
SET
:
: OK
EXIT : MENU
TV GUIDE PAGE
PROG . 5
SUN
MON
TUE
WED
THU
FRI
P 3 0 1
P - - -
P - - -
P - - -
P - - -
P - - -
P - - -
SAT
SELECT
SET
:
: OK
EXIT : MENU
117
Download from Www.Somanuals.com. All Manuals Search And Download.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
demonstration 81
erasing the data of an unwanted
programme 102
labelling a recorded programme
and tape 90
protecting a recorded programme
100
recording 82
registering the contents of a recor-
ded tape in the SmartFile label 98
Monitoring
during playback 67
during recording 67
A
Accessories supplied 4
Adjusting
picture 36, 70
N
tracking 70
NICAM broadcasts 67
Normal audio track 68
AFT (Auto Fine Tuning) 36
Audio dubbing 78
Audio track 68
Auto Clock set 24
Auto Set Up 21
O
selecting 87
OPC (Optimum Picture Con-
trol) 70
SmartFile label 4, 82
SMARTLINK 13
Automatic Power Off 13
connection 11
NexTView Download 13
One Touch Menu 13
One Touch Play 13, 47
One Touch Timer 13
Preset Download 13
TV Direct Rec 13, 51
SP mode 49
C
P
Changing the programme posi-
tion 39
Clock setting 22
Colour system
compatible colour systems 2
setting 46
Connecting
the VCR to the TV with a EURO-
AV (Scart) connector 11
the VCR to the TV with an aerial
cable only 14
to a Set - Top Box 15
to a stereo system 17
Counter 46
PDC (Programme Delivery
Control) 55
Personal code 43
Picture adjustment. See Adjus-
ting
Playback 45
at various speeds 46, 60
frame- by- frame 61
selecting the sound 67
slow motion 61
Power save 74
Presetting channels 34
Station name
changing 37
setting 37
Synchronized Recording 63
T
Timer recording 52, 57
R
D
overlapping timer recording 66
using the VIDEO Plus + system
52
Recording 48
bilingual programmes 67
saving 50
Disabling the programme posi-
tions 41
Dubbing. see Editing
Timer setting
cancelling 65
changing 65
checking 65
daily/weekly recording 55, 59
Tracking adjustment. See Ad-
justing
using the VIDEO Plus + system
52
what you are watching on the TV
51
while watching another program-
me 50
E
Editing 75
EP mode 46
EURO-AV connection 11
Remote commander 5
RF channel 18, 20
V
H
RR (Reality Regenerator) 70
VPS (Video Programme Sys-
tem) 55
Hi-fi audio track 68
S
I
Safety tab 50
Searching
Index Search 69
at various speeds 60
using the index function 69
Set - Top Box
connecting 15
line through 15
L
Language selecting 33
LP mode 49
setting 26
SMARTFILE 80
checking the contents of a tape 88
M
Menu options 72
Sony Corporation Printed in Europe
Download from Www.Somanuals.com. All Manuals Search And Download.
|