Sony Universal Remote RM AX1400 User Manual

2-680-316-12(1)  
Integrated Remote  
Commander  
Operating Instructions  
Getting Started  
Operating  
Unit Settings  
Additional Information  
Appendix  
RM-AX1400  
© 2006 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notice for users  
Declaration of Conformity  
On the supplied software  
Copyright laws prohibit reproducing  
the software or the manual  
Trade Name:  
SONY  
Model number: RM-AX1400  
Responsible Party:  
accompanying it in whole or in part, or  
renting the software without the  
permission of the copyright holder.  
In no event will SONY be liable for any  
financial damage, or loss of profits,  
including claims made by third parties,  
arising out of the use of the software  
supplied with this unit.  
In the event a problem occurs with this  
software as a result of defective  
manufacturing, SONY will replace it.  
However, SONY bears no other  
responsibility.  
The software provided with this unit  
cannot be used with equipment other  
than that which is so designated.  
Please note that, due to continued  
efforts to improve quality, the software  
specifications may be changed without  
notice.  
Sony Electronics Inc.  
Address:  
16530 Via Esprillo,  
San Diego, CA 92127  
USA  
Telephone number:  
858-942-2230  
This device complies with Part 15 of  
the FCC Rules. Operation is subject to  
the following two conditions: (1) This  
device may not cause harmful  
interference, and (2) this device must  
accept any interference received,  
including interference that may cause  
undesired operation.  
Operation of this unit with software  
other than that provided is not covered  
by the warranty.  
Program © 2006 Sony Corporation  
Documentation © 2006 Sony Corporation  
Microsoft, Windows and Windows  
Media are trademarks or registered  
trademarks of Microsoft Corporation in  
the United States and/or other countries.  
All other trademarks and registered  
trademarks are trademarks or registered  
trademarks of their respective holders.  
In this manual, ™ and ® marks are not  
specified.  
Adobe Reader is a trademark of Adobe  
Systems Incorporated.  
Microsoft Windows XP Media Center  
Edition, Microsoft Windows XP  
Professional and Microsoft Windows  
XP Home Edition are mentioned as  
Windows XP in this manual.  
Microsoft Windows 2000 Professional is  
mentioned as Windows 2000 in this  
manual .  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control up to 8 components  
With the Remote Commander, you can  
control up to 8 components, including  
your TV, VCR, DVD, DVR, CD, RCVR,  
etc.  
Features  
The RM-AX1400 Remote Commander  
provides centralized control of all your  
AV components from a single remote  
control and saves the trouble of operating  
different AV components with different  
remote control devices. The following are  
its main features.  
Centralized control of Sony AV  
components with this one Remote  
Commander  
The Remote Commander is preset at the  
factory to operate Sony brand  
components, so you can use it out of the  
box as a control center for your Sony AV  
components.  
The supplied software “AX1400  
Remote Editor” for easy Remote  
Commander setup  
By installing the “AX1400 Remote  
Editor” on the supplied CD-ROM onto  
your PC, you can customize the setting of  
the Remote Commander according to  
your preferences.  
You can also program various advanced  
settings easily. (The main settings of the  
Remote Commander can only be  
programmed using “AX1400 Remote  
Editor.”)  
The settings programmed on your PC  
can be transferred to the Remote  
Commander as necessary using the  
supplied Dedicated USB cable.  
Remote control signals for non-Sony  
components are also preset  
The Remote Commander also recognizes  
the preset codes for most major brands  
components, as well as Sony. Just select  
the corresponding codes to control all  
your AV components.  
Learning function lets you program  
other remote control signals you may  
need  
The Remote Commander can learn the  
remote control infrared signals of  
non-preset components. The Remote  
Commander can learn remote control  
signals (infrared signals only) of other  
devices such as air conditioners, lights,  
etc. (some specific appliances or  
functions may not be available).  
XPRESS function for executing a  
series of actions to operate several  
AV components by pressing just one  
button  
Groups of commands from different  
components can be set for up to 8  
XPRESS functions. For example, when  
you watch a DVD using a TV and an  
amplifier/receiver, you can press just one  
button to turn on/off each component, and  
select the correct inputs. Other buttons  
operate source components (the  
components which output picture or  
sound).  
Also, the XPRESS function can memorize  
the status of power on/off, input select  
status of each component, and send a  
signal to synchronize them to the Remote  
Commander, regardless of their current  
status.  
System Control function executes a  
series of actions (a macro) by  
pressing one button  
In addition to the XPRESS function, more  
settings can be programmed to perform a  
series of actions (a macro) just by  
pressing one button. You can program up  
to 8 System Control functions.  
Furthermore, you can program a series of  
actions (a macro) to other buttons as a  
single step of an XPRESS function or  
component operation.  
Label function lets you display the  
comment assigned to each button  
By registering a comment (up to 12  
letters) using “AX1400 Remote Editor”  
for each button, you can display the  
comment when you press the button.  
Bright and clear organic EL display  
and button illumination  
Embedded organic EL  
(electroluminescence) display and button  
illumination allow you to operate easily  
in the dark.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Features ................................................4  
Overview ...............................................6  
Additional Information  
Precautions .........................................24  
Maintenance .......................................24  
Specifications......................................24  
Troubleshooting ..................................25  
Getting Started  
Unpacking .............................................7  
Installing the batteries .........................7  
Location and function of controls ........ 8  
Appendix  
Table of preset functions ....................28  
Setting up for your PC ..........................9  
Installing the “AX1400 Remote  
Editor” ...................................................... 9  
Installing the USB driver ......................... 10  
Connecting the Remote Commander  
to your PC .............................................. 11  
Using the AX1400 Remote Editor”  
to set up the Remote Commander ... 12  
Using “AX1400 Remote Editor”  
– Help ...................................................... 13  
Operating  
Operating the Remote Commander .... 14  
What is the XPRESS function? ................ 14  
Selecting desired function ....................... 15  
Operating the XPRESS function ............. 16  
Operating components individually ..... 17  
To control the volume .............................. 17  
Other useful functions ........................18  
To operate the Remote Commander  
in the dark .............................................. 18  
To synchronize with the status of a  
component .............................................. 18  
To turn off all the components at  
one time .................................................. 19  
Locking the controls – Hold function .... 19  
Unit Settings  
Setting the button illumination .......... 20  
Setting the display..............................22  
Setting the beep .................................23  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview  
Easy setup on your PC  
You can easily download a variety of settings from your PC to the Remote Commander  
(RM-AX1400) using the “AX1400 Remote Editor” on the supplied CD-ROM.  
AV components  
AX1400 Remote Editor  
Preset  
Download  
Remote Commander  
(RM-AX1400)  
The setup wizard helps you make  
all the necessary settings!  
Note  
Most of settings of the Remote Commander (RM-AX1400) can be customized only on the PC.  
Comfortable operation  
You can operate all of your components by the Remote Commander (RM-AX1400).  
In the example below, to watch a DVD by pressing just one button, the DVD player is  
assigned to the button as the source component, the TV as the picture display, and the  
receiver as the sound output. With this setting, the DVD starts playing automatically by  
simply pressing one button, regardless of your components’ current power-on/off and  
input select status.  
TV  
Y
PLA  
Power On  
Change Input  
DVD  
Power On  
Start Playback  
Receiver  
One press!  
Power On  
Change Input  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Unpacking  
Check the contents of the package before  
using the Remote Commander.  
Installing the batteries  
Slide and open the battery compartment  
lid and insert two size AA (R6) alkaline  
batteries (not supplied). Be sure to match  
the + and – of the batteries with the +  
and – of the battery compartment.  
Remote Commander RM-AX1400 (1)  
Dedicated USB cable (1)  
CD-ROM* (1)  
– AX1400 Remote Editor software  
– Operating Instructions (PDF file)  
When to replace the batteries  
Alkaline batteries will last up to 5  
months (a Sony TV turned on/off up to  
approx. 300 times per day). If the Remote  
Commander does not operate properly,  
the batteries are getting weak and E  
appears on the screen. When the screen  
dims or the button illumination grows  
dim, the batteries are getting weak, and  
need to be replaced.  
Operating Instructions (1)  
Warranty Card (1)  
* Do not attempt to play this CD-ROM in an  
audio CD player.  
Notes on replacing the batteries  
• Do not take more than one hour to replace  
the batteries. Otherwise, your unit settings  
(page 20) will be initialized.  
• Do not attempt to recharge dry batteries.  
• Do not carry dry batteries together with coins  
or other metallic objects. This can generate  
heat if the positive and negative terminals of  
the batteries accidentally come into contact  
with metallic objects.  
• When you are not going to use the unit for a  
long time, remove the batteries to avoid  
damage from battery leakage and corrosion.  
• Do not use different types of batteries at the  
same time.  
• When you replace the batteries, replace them  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
both with new ones.  
5 SYNC-UP button (pages 18)  
Used to synchronize the Remote  
Commander with the status of a  
component.  
Location and function  
of controls  
6 XPRESS buttons (pages 15)  
Used to perform the function.  
1
qh  
7 Number/ENT buttons  
Used to change the channel. For  
example, to change to channel 5, press  
0 and 5 (or press 5 and ENT).  
2
3
qj  
4
5
6
8 Dot button  
9 DIGITAL/ANALOG button  
q; VOL +/– buttons* (pages 17)  
Adjusts the volume.  
qa MUTING button* (pages 17)  
Silences the sound. Press the button to  
silence, and again to return to the  
previous volume level.  
7
8
9
qk  
ql  
w;  
qs GUIDE button  
qd OK and cursor buttons  
qf EXIT button  
q;  
qa  
qs  
qg Player control buttons  
Used to fast-rewind/play/fast-  
forward/record/stop/pause a  
component.  
wa  
ws  
qd  
qf  
wd  
qh ALL OFF button (pages 19)  
qj MORE button (pages 15)  
Used to display the functions on the  
screen by pressing repeatedly.  
qg  
wf  
qk CH +/– buttons  
Selects the channel.  
ql TWIN VIEW button  
w; RECALL button  
wa INFO button  
The CHANNEL +, number 5 and N buttons  
have a tactile dot.  
ws MENU button  
wd TOOLS button  
wf ABCD buttons  
1 LIGHT button (pages 18)  
Used to brighten the button  
illumination in the dark. Press the  
button once to turn on/off the button  
illumination.  
Available for programming desired  
settings.  
Used to program various functions by  
using “AX1400 Remote Editor.”  
2 Organic EL display  
Displays the functions, setting menu  
and transmission/battery marks.  
3 MULTI-FUNCTION buttons (pages 15)  
Used to select the desired function on  
the screen.  
* Note on the VOL +/– and MUTING  
buttons  
When you select a visual component, the  
TV’s volume will be controlled; when you  
select an audio component, the amplifier’s  
volume will be controlled.  
4 BACK button  
Used to return to the previous  
component or XPRESS function.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the “AX1400  
Remote Editor”  
Setting up for your PC  
By installing the “AX1400 Remote  
Editor” on the supplied CD-ROM onto  
your PC, you can set up the Remote  
Commander simply with your PC.  
“AX1400 Remote Editor” makes setting  
up a complex series of operations (a  
macro) easy, and also allows various  
other convenient functions to be set up.  
For details, see the Help menu provided  
in “AX1400 Remote Editor.”  
Follow the instructions below to install.  
Notes  
• Do not simply copy the “AX1400 Remote  
Editor” folder in the supplied CD-ROM to a  
PC. You need to install it properly for it to  
work.  
• Administrator privileges are required for  
installation on PCs running Windows 2000 or  
Windows XP.  
1 Close all software running on  
Windows.  
“AX1400 Remote Editor” system  
requirements  
Operating systems (manufacturer  
installed):  
2 Insert the supplied CD-ROM into  
the CD-ROM drive of the PC.  
Windows XP Media Center Edition  
2005/Windows XP Media Center  
Edition 2004/Windows XP Media  
Center Edition/Windows XP  
Professional/Windows XP Home  
Edition/Windows 2000 Professional  
Computer:  
IBM PC/AT or compatible (The  
software does not run on Macintosh  
operating system)  
After a moment, “RM-AX1400 Install  
CD Menu” appears.  
CPU:  
3 Click [Install AX1400 Remote  
Editor].  
Pentium II 400 MHz or more  
Required Hard Drive Capacity:  
20 MB or more  
“AX1400 Remote Editor 1.0 Setup”  
appears.  
RAM:  
64 MB or more (128 MB or more for  
Windows XP)  
Display:  
High (16 bits) color or higher,  
1024 × 768 dots or better*  
Required Peripherals:  
CD-ROM Drive, USB port  
* Does not operate with a display of under  
1024 × 768 dots.  
Continued  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up for your PC (continued)  
For Windows XP users  
1 Close all software running on  
Windows.  
4 Click [Next].  
2 Insert the supplied CD-ROM into  
the CD-ROM drive of the PC.  
After a moment, “RM-AX1400 Install  
CD Menu” appears.  
Follow the on-screen instructions and  
proceed with the installation.  
When the installation is complete,  
“AX1400 Remote Editor 1.0 Setup”  
automatically quits.  
3 Click [Exit] to close “RM-AX1400  
Tip  
Install CD Menu.”  
If the installation screen is hidden behind  
other windows  
4 Connect the PC and the Remote  
Commander using the supplied  
Dedicated USB cable (page 11).  
“Found New Hardware” appears in  
the Notification Area in the lower  
right-hand of the display. After a  
moment, “Found New Hardware  
Wizard” appears.  
If “AX1400 Remote Editor 1.0 Setup”  
disappears behind other screen while  
installing, press the [Tab] key several times  
while pressing down the [Alt] key to bring  
up “AX1400 Remote Editor 1.0 Setup”  
again.  
Installing the USB driver  
Tip  
You need to install the USB driver before  
connecting the supplied Dedicated USB  
cable to your PC and the Remote  
Commander.  
If the following confirmation message  
“Can Windows connect to Windows  
Update to search for software?” appears,  
select [No, not this time], then click  
[Next].  
Follow the instructions below to install.  
Notes  
• Without batteries in the Remote Commander,  
the USB connection cannot be detected by the  
PC even if the Dedicated USB cable is  
connected.  
• Make sure to install the batteries before  
installing the USB driver. If the USB driver  
installation is interrupted by mistake, install  
it again from the beginning.  
• Do not simply copy the USB driver in the  
supplied CD-ROM to the PC. You need to  
install it properly for it to work.  
• Administrator privileges are required for  
installation on PCs running Windows 2000 or  
Windows XP.  
• On Windows 2000 or Windows XP, you need  
to install the driver for each port to which the  
Remote Commander will be connected.  
• Depending on the PC, various messages  
other than those mentioned in this manual  
may appear during the USB driver  
installation. Just follow the on-screen  
instructions of these messages to install.  
5 Select “Install the software  
automatically [Recommended]”,  
then click [Next].  
Installing of the USB driver starts.  
“Completing the Found New  
Hardware Wizard” appears when the  
installation is complete.  
6 Click [Finish].  
Installing of the USB driver finishes.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Windows 2000 users  
Connecting the Remote  
Commander to your PC  
1 Close all software running on  
Windows.  
You can now connect the Remote  
Commander to your PC with the  
supplied Dedicated USB cable. Connect  
whenever you want to verify correct  
operation of button commands for an  
XPRESS function, etc., or to exchange  
setup data between your PC and the  
Remote Commander.  
2 Insert the supplied CD-ROM into  
the CD-ROM drive of the PC.  
After a moment, “RM-AX1400 Install  
CD Menu” appears.  
3 Click [Exit] to close “RM-AX1400  
Install CD Menu.”  
IMPORTANT  
4 Connect the PC and the Remote  
Commander using the supplied  
Dedicated USB cable (page 11).  
“Found New Hardware” appears.  
After a moment, “Found New  
Hardware Wizard” appears.  
Do not keep the Remote Commander  
connected to the PC when the PC is in  
standby/hibernation, otherwise, a  
malfunction could occur. Be sure to  
disconnect the Remote Commander from  
the PC before standby/hibernation begins.  
Furthermore, do not connect the Remote  
Commander to the PC while it is in  
standby/hibernation. Wait until the PC  
comes out of standby/hibernation before  
connecting.  
5 Click [Next].  
“Install Hardware Device Drivers”  
appears.  
6 Select “Search for a suitable driver  
for my device [recommended]”,  
then click [Next].  
Notes  
• The Remote Commander uses the battery  
when connected to the PC. When you finish  
the setup, unplug from the USB connector.  
• If “E” is shown in the display, the Remote  
Commander cannot be recognized on your  
PC. Before connecting the Remote  
“Locate Driver Files” appears.  
7 Mark only the check box of “CD-  
ROM drives”, then click [Next].  
“Driver Files Search Results” appears,  
and the found driver is displayed.  
Commander to your PC, be sure to install  
fresh batteries in the Remote Commander.  
• Do not disconnect the Dedicated USB cable  
from your PC while your PC is  
8 Click [Next].  
communicating with the Remote  
Commander, as a malfunction may occur.  
• Only connect one Remote Commander to  
your PC at a time. Otherwise, you will not be  
able to download the settings correctly.  
Installing of the USB driver starts.  
“Completing the Found New  
Hardware Wizard” appears when the  
installation is complete.  
9 Click [Finish].  
Installing of the USB driver finishes.  
Continued  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up for your PC (continued)  
Using the AX1400  
Remote Editor” to set up  
1 Open the battery compartment half-  
way, then connect the Dedicated USB  
cable to the USB connector of the  
Remote Commander.  
the Remote Commander  
You can set the Remote Commander  
using the “AX1400 Remote Editor.”  
Follow the procedures below.  
Note  
“AX1400 Remote Editor” does not start up  
when you do not log in as Administrator.  
1 Gather all your remote controls.  
2 Connect the Dedicated USB cable to  
the USB connector of your PC.  
We recommend using the remote  
controls which were supplied with  
each component, but if you are using  
a replacement remote control (due to  
loss or damage) or a universal remote  
(which controls multiple  
components), have it handy as well.  
2 On your PC, click the Windows  
“Start” button and point to “All  
Programs” - “Sony Remote  
AX1400,” - “AX1400 Remote  
Editor” and click.  
“AX1400 Remote Editor” starts up,  
and the last project appears.  
The first time “AX1400 Remote  
Editor” starts up, “New Project  
Wizard” appears. Following the on-  
screen instructions, create a project.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
Using “AX1400 Remote  
Editor” – Help  
You can set up the Remote Commander  
by operating “AX1400 Remote Editor,”  
referring to the detailed instructions  
provided in Help.  
If you do not have a remote control for one  
of your components, do not add that  
component’s remote control settings to the  
Remote Commander on the following  
screen. Exit “New Project Wizard”, then  
select the “ADVANCED” tab and proceed  
with setting. See the Help file of “AX1400  
Remote Editor” for details.  
Starting Help  
Start up “AX1400 Remote Editor,” then  
click “Help” on the menu bar and select  
“AX1400 Remote Editor Help.”  
Help topic for the current edit screen  
appears by pressing the “F1” key while  
editing. If no Help topic is available for  
the screen, the top menu of Help appears.  
How to use Help  
Tips  
Click one of the tabs: “Contents,”  
“Index” or “Search,” and check the  
information you need.  
• If you are using an operating system other  
than Windows XP, click the “Start” button of  
Windows and point to “Programs” - “Sony  
Remote AX1400” - “AX1400 Remote Editor”  
and click to start up “AX1400 Remote  
Editor”.  
• If “ ” (the shortcut icon of “AX1400 Remote  
Editor”) appears on the desktop of  
Windows, double-click the icon to open it.  
(Depending on the setting, Windows XP may  
automatically delete icons from the desktop  
if they have not been used for a certain  
period of time. If “ ” does not appear on  
the desktop, use the “Start” button.)  
• While in “Introduction” of “New Project  
Wizard,” if you press “Cancel,” the dialog  
box appears. You can select the following:  
Exit: Finishes “New Project Wizard” and  
“AX1400 Remote Editor.” If you “AX1400  
Remote Editor” starts up again, “New  
Project Wizard” reappears.  
Main Set-up Screen: “New” screen appears.  
Enter a project name under “Input a project  
folder name,” and select the folder in which  
you want to create the project. Then click  
“OK.” “AX1400 Remote Editor” starts up by  
the Advanced mode as a factory settings.  
Cancel: Returns to “New Project Wizard.”  
To search by contents (Contents)  
You can find information relating to a specific  
subject by using the table of contents shown on  
the “Contents” tab.  
To search indexed information  
(Index)  
You can find information from a list of  
predetermined keywords shown on the  
“Index” tab.  
To search using keywords (Search)  
You can submit a keyword search on the  
“Search” tab by typing in your keyword(s).  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating  
What is the XPRESS  
function?  
The XPRESS function is an executable  
series of actions that can operate several  
AV components by pressing just one  
button.  
For example, you have to perform the  
following operations sequentially to  
watch a DVD using a TV, amplifier/  
receiver, and a DVD player.  
1 Turn on the DVD player.  
2 Turn on the TV.  
3 Set the appropriate input mode of the  
TV.  
4 Turn on the amplifier/receiver.  
5 Set the appropriate input selector of the  
amplifier/receiver.  
Operating the Remote  
Commander  
There are two ways to operate the  
components on the Remote Commander  
(RM-AX1400).  
XPRESS operation: You can operate  
multiple AV components related to a  
specific task, such as “watching a  
DVD,” or “watching a digital satellite,”  
etc. This is called an “XPRESS  
function.”  
Single component operation: You can  
operate each AV component  
individually (page 17).  
Caution  
Before you operate the Remote Commander,  
determine all settings for your components and  
necessary XPRESS functions by “AX1400  
Remote Editor” on your PC. See the Help file of  
“AX1400 Remote Editor” for details.  
6 Start DVD playback.  
By setting the above actions as an  
XPRESS function, you can watch a DVD  
by simply pressing one button.  
Also, the XPRESS function can memorize  
the status of power on/off, input selector  
for each component, and send a signal to  
synchronize the status which you want  
without reference to the component’s  
status.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you select an XPRESS function or  
component operation by pressing the  
XPRESS buttons or MULTI-FUNCTION  
buttons on the Remote Commander, the  
Remote Commander operates the  
components corresponding to the  
selected function.  
Selecting desired function  
XPRESS buttons: Press an XPRESS  
button for the desired function.  
For details on function assigned to each  
button, see “Table of preset functions”  
(page 28), or display Labels assigned to  
each button following the procedure  
below.  
MULTI-FUNCTION buttons/MORE  
button: Displays the functions on the  
screen by pressing the MORE button  
repeatedly, then select by pressing the  
MULTI-FUNCTION button for the  
desired function.  
To display comments assigned to  
each button  
1 If you press a button, its signals are  
sent and the comment assigned to the  
button appears in the second line of the  
screen while holding down the button.  
2 By pressing the button while holding  
down the LIGHT button, you can  
display comments without sending  
signals.  
Select:  
XPRESS XPRESS XPRESS  
DVR SAT CBL  
/1  
Tip  
Comments are editable with “AX1400 Remote  
Editor.” See the Help file for details.  
XPRESS buttons and MULTI-FUNCTION  
buttons are assigned with the XPRESS  
function or component at the factory  
preset as shown in the table below.  
Default button assignment list  
Button  
Assignment  
XPRESS-TV  
XPRESS-TV  
XPRESS-MOVIE  
XPRESS-MUSIC  
XPRESS-RADIO  
Page1 Left  
XPRESS-DVD  
XPRESS-CD  
XPRESS-RCVR  
XPRESS-DVR  
XPRESS-SAT  
XPRESS-CBL  
Center  
Right  
Page2 Left  
XPRESS-VCR  
Component-TV  
Component-DVD  
Center  
Right  
Page3 Left  
Component-CD  
Component-DVR  
Component-SAT  
Center  
Right  
Page4 Left  
Component-CBL  
Component-VCR  
Component-RCVR  
Center  
Right  
Continued  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating the XPRESS  
function  
2 Press the left MULTI-FUNCTION  
button which corresponds to  
“XPRESS VCR.”  
When you select an XPRESS function  
with the MULTI-FUNCTION buttons or  
XPRESS buttons, the XPRESS function  
label and component label made for an  
XPRESS function appear on the screen.  
Select:  
XPRESS COMP. COMP.  
VCR TV DVD  
/2  
XPRESS  
XPRESS MOVIE  
function label  
DVD  
TV  
Video Component  
The TV and VCR turn on and each  
component is set to its appropriate  
input. The Remote Commander is  
now able to operate your VCR. You  
can also set the VCR to start playback  
automatically using “AX1400 Remote  
Editor.”  
Source Component  
Pressing a MULTI-FUNCTION button  
switches to the individual component  
operation (page 17) that make up the  
XPRESS function.  
Example: To operate a VCR by the  
XPRESS function  
Tip  
Each component is automatically set to the  
appropriate status for watching the VCR  
regardless of its current status.  
1 Display desired XPRESS function  
by pressing the MORE button  
repeatedly. In this example, press  
the MORE button twice.  
If some components do not change correctly,  
synchronize with the status of the  
components. For details, see “To synchronize  
with the status of a component” on page 18.  
3 Press the buttons for desired  
Page number and the selectable  
functions appear on the screen.  
operation.  
When a signal is sent,  
appears.  
You can also use other buttons, such  
as the VOL (volume) +/–, CH  
(channel) +/–, MUTING, cursor, and  
MENU buttons.  
Select:  
XPRESS COMP. COMP.  
VCR TV DVD  
/2  
Also see “Table of preset functions”  
(page 28) for the functions of buttons  
for each source component.  
To return to the previous component  
or XPRESS function  
Press the BACK button.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating components  
individually  
3 Press the buttons for desired  
operation.  
When a signal is sent,  
appears.  
When you select a component operation  
with the MULTI-FUNCTION buttons or  
XPRESS buttons, the component label  
and its functions appear on the screen.  
You can also use other buttons, such  
as the VOL (volume) +/–, CH  
(channel) +/–, MUTING, cursor, and  
MENU buttons.  
Also see “Table of preset functions”  
(page 28) for the function of buttons  
for each source component.  
Component  
label  
COMP. DVD  
POWER  
Functions  
To return to the previous component  
or XPRESS function  
Press the BACK button.  
Example: To operate a DVD player  
individually  
Note  
Your components may not work as intended  
depending on the function of your  
components. In this case, program the remote  
control signals with the Learning function. See  
the Help file of “AX1400 Remote Editor” for  
details.  
1 Display desired component you  
want to operate individually by  
pressing the MORE button  
repeatedly. In this example, press  
the MORE button twice.  
To control the volume  
Page number and the selectable  
functions appear on the screen.  
Select:  
XPRESS COMP. COMP.  
VCR TV DVD  
/2  
VOL +/– button  
MUTING button  
2 Press the right MULTI-FUNCTION  
button which corresponds to  
“COMP. DVD.”.  
Select:  
XPRESS COMP. COMP.  
VCR TV DVD  
/2  
Press the VOL +/– buttons to control the  
volume, and the MUTING button for  
silence. When you select a visual  
component, the TV’s volume will be  
controlled; when you select an audio  
component, the amplifier’s volume will  
be controlled.  
The component label and its functions  
appear on the screen. The Remote  
Commander is now able to operate  
your DVD player.  
COMP. DVD  
POWER  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
To synchronize with the  
status of a component  
Other useful functions  
To operate the Remote  
Commander in the dark  
SYNC-UP button  
LIGHT button  
The Remote Commander memorizes the  
status of the components’ input selectors,  
and power on/off status. However, if  
you turn on/off a component manually  
or with a different remote control, the  
Remote Commander may not recognize  
the current component status. In this  
case, press the SYNC-UP button to  
Press the LIGHT button to turn on the  
button illumination. Pressing any button  
also activates this by default. If no button  
is pushed within a set time, the button  
illumination automatically turns off.  
synchronize with the status of the current  
component and the Remote Commander.  
Default button illumination  
settings  
1 Press the SYNC-UP button.  
The component you want to confirm  
the status of appears on the screen.  
Off-time setting  
Brightness  
10 seconds  
Level 15 (Max: 15)*  
All buttons  
On  
On-mode setting  
Fade effect  
COMP. VCR  
SET POWER > ON  
POWER  
DONE CANCEL  
* It is preset to “15” at the factory. Once you  
download the data set up on your PC to the  
Remote Commander, the initial setting is  
changed to “5.”  
2 Press the left MULTI-FUNCTION  
button (POWER) repeatedly until  
the desired status fixes, then press  
the center MULTI-FUNCTION  
button (DONE).  
See “Setting the button illumination”  
(page 20) to set the button illumination.  
The screen switches to the next status  
to be synchronized.  
3 Press the left MULTI-FUNCTION  
button (INPUT) repeatedly until the  
desired status fixes, then press the  
center MULTI-FUNCTION button  
(DONE).  
To return to the previous component  
or XPRESS function  
Press the BACK button or right  
MULTI-FUNCTION (CANCEL) button.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To turn off all the  
components at one time  
Locking the controls  
– Hold function  
To prevent accidental operation, you can  
lock all the buttons with the Hold  
function.  
ALL OFF button  
While pressing the LIGHT button,  
press the SYNC-UP button.  
A message reminding you to release the  
Hold function appears for 10 seconds on  
the screen.  
If you press the ALL OFF button, all  
controlling components turn off .  
When the controls are locked  
If you attempt to operate the Remote  
Commander, a message reminding you  
to release the Hold function appears for  
10 seconds on the screen.  
Some components may not turn off by  
pressing the button. In this case, press the  
SYNC-UP button to synchronize with the  
power on/off status of the components.  
For details, see “To synchronize with the  
status of a component” on page 18.  
Release Lock  
Press LIGHT+SYNC-UP  
To unlock the controls  
While pressing the LIGHT button, press  
the SYNC-UP button.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unit Settings  
4
5
Press the OK button or the center  
MULTI-FUNCTION button.  
The following “SET MODE” screen  
appears.  
Setting the button  
illumination  
Button illumination is preset at the  
factory to activate whenever the Remote  
Commander is operated, and to switch  
off automatically if you do not operate  
for more than 10 seconds. You can set the  
button illumination automatic-off time,  
brightness, fade effect and which buttons  
activate the button illumination. To  
change this setting, perform the  
SET MODE  
>1 LIGHT OFF TIME  
2 LIGHT BRIGHTNESS  
Select “2 LIGHT BRIGHTNESS” by  
pressing the V/v button, then  
press the OK button.  
The following setting screen for  
brightness appears.  
following procedure.  
LIGHT BRIGHTNESS  
1
While pressing the LIGHT button,  
press the MORE button  
(-)  
LEVEL15  
(+)  
6
7
Press the B/b button or the left/  
right MULTI-FUNCTION button  
to change the  
brightness of the button  
illumination.  
You can set the brightness of the  
button illumination from 1 to 15.  
Each time the button is pressed, the  
level lighter/darker by 1.  
The following “SET MODE” screen  
appears.  
SET MODE  
>1 LIGHT OFF TIME  
2 LIGHT BRIGHTNESS  
2
3
Select “1 LIGHT OFF TIME” by  
pressing the V/v button, then  
press the OK button.  
The following setting screen for  
light-off time appears.  
Press the OK button or the center  
MULTI-FUNCTION button.  
The following “SET MODE” screen  
appears.  
LIGHT OFF TIME  
SET MODE  
>2 LIGHT BRIGHTNESS  
3 LIGHT ON MODE  
(-)  
10sec  
(+)  
Press the B/b button or the left/  
right MULTI-FUNCTION button  
to change the light-off time of the  
button illumination.  
You can set the light-off time of the  
button illumination from 1 to 60  
seconds. Each time the button is  
pressed, the time decreases/increases  
by 1 second. For example, “20sec” on  
the screen means 20 seconds.  
Note  
When you set the automatic-off time longer  
than 10 seconds (factory setting), battery  
life may be shorter.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
9
Select “3 LIGHT ON MODE” by  
pressing the V/v button, then  
press the OK button.  
The following setting screen for  
buttons to activate the button  
illumination appears. The current  
setting is shown inside [ ].  
11 Select “6 FADE EFFECT” by  
pressing the V/v button, then  
press OK button.  
The following setting screen for fade  
effect appears. The current setting is  
shown inside [ ].  
FADE EFFECT  
LIGHT ON MODE  
OFF  
[ ON ]  
LIGHT  
[ ALL ]  
12 Press the B/b button or the left/  
right MULTI-FUNCTION button  
to select the fade effect of the  
button illumination.  
Press the B/b button or the left/  
right MULTI-FUNCTION button  
to select which buttons activate the  
button illumination.  
LIGHT: The button illumination is  
activated by pressing the LIGHT  
button only.  
ALL: The button illumination is  
activated by pressing any buttons on  
the Remote Commander except the  
VOL +/– and CH +/– .  
The setting changes and a beep  
sounds each time you press the  
button.  
OFF: normal button illumination  
ON: fade in/out the button  
illumination  
The setting changes and a beep  
sounds each time you press the  
button.  
13 Press the OK button or the center  
MULTI-FUNCTION button, then  
press the EXIT button or the BACK  
button.  
The Remote Commander returns to  
Note  
the normal screen.  
In the “ALL” position, if you use the  
Remote Commander frequently, battery life  
may be shorter. In this case, shorten the  
light-off time.  
To return to the previous screen, and  
to quit before finishing  
Press the BACK button or the EXIT button, and  
the previous screen returns.  
Press the BACK button or the EXIT button  
while the “SET MODE” screen appears, and  
the normal screen returns.  
10 Press the OK button or the center  
MULTI-FUNCTION button.  
The following “SET MODE” screen  
appears.  
SET MODE  
>3 LIGHT ON MODE  
4 DISP. OFF TIME  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
5
Press the OK button or the center  
MULTI-FUNCTION button.  
The following “SET MODE” screen  
appears.  
Setting the display  
The Remote Commander is preset at the  
factory to switch off the display  
automatically if you do not operate it for  
more than 30 seconds. You can set the  
display’s automatic-off time and  
brightness. To change this setting,  
perform the following procedure.  
SET MODE  
>4 DISP. OFF TIME  
5 DISP. BRIGHTNESS  
Select “5 DISP. BRIGHTNESS” by  
pressing the V/v button, then  
press the OK button.  
The following setting screen for  
brightness appears.  
1
While pressing the LIGHT button,  
press the MORE button  
DISP. BRIGHTNESS  
The following “SET MODE” screen  
appears.  
(-)  
LEVEL 1  
(+)  
6
Press the B/b button or the left/  
right MULTI-FUNCTION button  
to adjust the brightness of the  
screen.  
SET MODE  
>1 LIGHT OFF TIME  
2 LIGHT BRIGHTNESS  
You can set the brightness of the  
screen from 1 to 3. Each time the  
button is pressed, the level lighter/  
darker by 1.  
2
3
Select “4 DISP. OFF TIME” by  
pressing the V/v button, then  
press the OK button.  
The following setting screen for the  
display’s automatic-off time appears.  
Note  
If you press the selectable button and the  
brightness level is already at the  
minimum/maximum level, no beep sound.  
The level can be set from 1 to 3.  
DISP. OFF TIME  
(-)  
30sec  
(+)  
7
Press the OK button or the center  
MULTI-FUNCTION button, then  
press the EXIT button or the BACK  
button.  
The Remote Commander returns to  
the normal screen.  
Press the B/b button or the left/  
right MULTI-FUNCTION button  
to change the display’s automatic-  
off time.  
You can set from 1 to 60 seconds.  
Each time the button is pressed, the  
time decreases/increases by 1  
second. For example, “30sec” on the  
screen means 30 seconds.  
To return to the previous screen, and  
to quit before finishing  
Press the BACK button or the EXIT button, and  
the previous screen returns.  
Press the BACK button or the EXIT button  
while the “SET MODE” screen appears, and  
the normal screen returns.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To return to the previous screen, and  
to quit before finishing  
Press the BACK button or the EXIT button, and  
the previous screen returns.  
Setting the beep  
The Remote Commander is preset at the  
factory with the confirmation beep set to  
on. To change this setting, perform the  
following procedure.  
Press the BACK button or the EXIT button  
while the “SET MODE” screen appears, and  
the normal screen returns.  
Tip  
You can use shortcuts for unit settings.  
While holding down the LIGHT button,  
press the MORE button. The “SET MODE”  
screen appears, then you can move to each  
setting screen by pressing the number  
button corresponding to the desired unit  
setting.  
1
While pressing the LIGHT button,  
press the MORE button  
The following “SET MODE” screen  
appears.  
Number Settings  
button  
SET MODE  
1
2
3
4
5
6
7
Light off time  
Light brightness  
Light on mode  
Display off time  
Display brightness  
Fade effect  
>1 LIGHT OFF TIME  
2 LIGHT BRIGHTNESS  
2
Select “7 BEEP SOUND” by  
pressing the V/v button, then  
press the OK button.  
The following setting screen for beep  
appears. The current setting is shown  
inside [ ].  
Beep sound  
BEEP SOUND  
OFF  
[ ON ]  
3
4
Press the B/b button or the left/  
right MULTI-FUNCTION button  
to select the beep setting.  
OFF: Turns off the beep.  
ON: Turns on the beep.  
The setting changes and a beep  
sounds each time you press the  
button.  
Press the OK button or the center  
MULTI-FUNCTION button, then  
press the EXIT button or the BACK  
button.  
The Remote Commander returns to  
the normal screen.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Precautions  
Specifications  
Do not drop the unit or give a shock to  
the unit, or it may cause a malfunction.  
Do not leave the unit in a location near  
heat sources, or in a place subject to  
direct sunlight, excessive dust or sand,  
moisture, rain or mechanical shock.  
Do not put foreign objects into the unit.  
Should any liquid or solid object fall  
into the unit, have it checked by  
qualified personnel before operating  
the unit any further.  
Do not expose the remote control  
detectors of your components to direct  
sunlight or other strong illumination.  
Too much light there can interfere with  
remote control operations.  
Operating distance  
Approx. 32.8 ft. (10 meters) (varies depending  
on components of different manufacturers)  
Power requirements  
Remote control and button illumination:  
Two size AA (R6) batteries  
Battery life  
Approx. 5 months (a Sony TV turned on/off  
up to approx. 300 times per day)  
Dimensions  
Approx. 2 1/2 × 9 × 1 3/16 in. (w × h × d)  
(60.4 × 227.5 × 29.4 mm)  
Mass  
6 oz. (170 g) (not including batteries)  
Learnable signals*  
Capacity per signal: up to 300 bits  
Signal frequency range: 455 kHz and up to  
300 kHz  
Be sure to place the Remote  
Commander out of the reach of small  
children or pets. Components such as  
air conditioners, heaters, electric  
appliances, and electric shutters or  
curtains receiving an infrared signal can  
be dangerous if misused.  
Signal interval: up to 1 second  
* Some signals cannot be learned by the  
Remote Commander, even though the signals  
comply with these specifications.  
Design and specifications are subject to change  
without notice.  
Maintenance  
Clean the surface with a soft cloth  
slightly moistened with water or a mild  
detergent solution. Do not use any type  
of solvent such as alcohol, benzine or  
thinner as they may damage the finish of  
the surface.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you have problems setting up or using the Remote Commander, first check the  
batteries (page 7), then check the items below. Refer also to Help of “AX1400 Remote  
Editor.”  
Trouble with the Remote Commander's basic settings  
Problem  
Solution  
The Remote Commander does  
not turn on.  
Check the remaining battery level. If low, replace with new ones.  
The display turns off  
automatically.  
The Remote Commander is preset at the factory to turn the display  
off automatically if you do not operate for more than 30 seconds.  
You can reset the automatic-off time to 1-60 seconds (page 22).  
The beep does not sound.  
The beep is turned off. Turn the beep on (page 23).  
Even though you hold down a • The volume buttons and cursor buttons, and some others,  
button, it does not work as  
intended.  
continue to work when they are pressed and held. If you  
program the signals of such buttons, Remote Commander (RM-  
AX1400) may not learn the signals accurately. Reprogram the  
signals by continuing to hold down the desired button of the  
other remote control until “Learning is complete.” appears in  
the “AX1400 Remote Editor” screen.  
The batteries of the other remote control are weak. Replace with  
new ones and reprogram the signals.  
The display setting is  
unintentionally changed.  
Unit Setting of the project set up on your PC is activated if you  
download data changed on your PC with the “Download the Unit  
Setting data together with the project data” box checked.  
“RECOVERY” appears on the  
screen and all the buttons are  
disabled.  
A malfunction has occurred in Remote Commander’s firmware.  
Update the firmware using “AX1400 Remote Editor.”  
Trouble with operation mode  
Problem  
Solution  
I cannot operate my component • Get closer to the component. The maximum operating distance  
by pressing the Remote  
Commander’s button.  
is approximately 32.8 ft. (10 m).  
• Check that you are aiming the Remote Commander directly at  
the component, and that there are no obstructions between the  
Remote Commander and the component.  
• Turn on the components first, if necessary.  
• Check that the component has infrared remote capability. For  
example, if your component did not come with a Remote  
commander, it probably is not capable of being controlled by a  
Remote Commander.  
The video/audio component’s • If your video components are connected to an audio component,  
volume is not controlled by the  
Remote Commander.  
see the Help menu provided in “AX1400 Remote Editor.”  
• You have assigned another component which was originally set  
as TV or RCVR at the factory. In this case, the volume cannot be  
controlled when you select a component other than TV or  
RCVR.  
Continued  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (continued)  
Problem  
Solution  
A System Control function does • Make sure that you have programmed the commands in the  
not work correctly.  
correct order.  
• Try changing the orientation of the Remote Commander. If that  
does not help, try placing the components as close to each other  
as possible.  
• Check the status of the components and make sure that you  
have set the components properly to receive commands.  
• The component codes are changed or new signals have been  
learned for a button that has been programmed with a series of  
commands. In this case, the new signals are transmitted when  
the series of commands is executed.  
Even if I operate an XPRESS  
function, the TV does not turn  
on, or it turns off.  
• The Remote Commander memorizes the status of the  
component’s input select and power on/off. However, if you  
turn on/off the component with its own remote control or  
operate the component directly, it will not recognize the current  
component status. In this case, press the SYNC-UP button to  
synchronize with the status of the current component and the  
Remote Commander.  
• If the TV turns off by its own Sleep function, the Remote  
Commander does not recognize its status. Turn off the TV with  
the Remote Commander.  
Even if I operate an XPRESS  
function, the source component  
does not turn on, or it turns off.  
• The Remote Commander memorizes the status of the  
component’s input select and power on/off. However, if you  
turn on/off the component with its own remote control or  
operate the component directly, it will not recognize the current  
component status. In this case, press SYNC-UP button to  
synchronize the status of the current component and the Remote  
Commander.  
• If the TV turns off by its own Sleep function, the Remote  
Commander does not recognize its status. Turn off the TV with  
the Remote Commander.  
Even if I operate an XPRESS  
function, the input selector of  
the TV or RCVR (Receiver/  
Amplifier) does not achieve the  
correct status.  
• The Remote Commander memorizes the status of the  
component’s input select and power on/off. However, if you  
turn on/off the component with its own remote control or  
operate the component directly, it will not recognize the current  
component status. In this case, press the SYNC-UP button to  
synchronize the status of the current component and the Remote  
Commander.  
• If the TV turns off by its own Sleep function, the Remote  
Commander does not recognize its status. Turn off the TV with  
the Remote Commander.  
The Remote Commander does  
not synchronize with the  
current status of components  
even though I perform the  
SYNC-UP operation.  
• Aim the Remote Commander at the components until Start  
macro or Exit macro operations are finished.  
• Start macro is not executed properly if the interval (delay time)  
between the component’s power-on signal and input switch  
signal is short. Set the interval (delay time) longer.  
• Start macro is not executed properly if the interval (delay time)  
between component’s input select signal is short. Set the interval  
(delay time) longer.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble with setting mode  
Solution  
Problem  
• When learning, place your component’s remote control and  
Remote Commander (RM-AX1400) of about 1-3 inches (3-8 cm)  
apart.  
The Remote Commander fails  
to learn remote control signals.  
• Check the remaining battery power of both remote units. If low,  
replace with new ones.  
• Avoid learning in places under direct sunlight or strong  
fluorescent light.  
• When you program signals of an interactive signal exchange  
system remote control unit (supplied with some of Sony’s  
receivers and amplifiers) to the Commander, the response signal  
of the main unit may interfere with the learning of the  
Commander. In such a case, move to a place where the signals  
will not reach the main unit (e.g. another rooms, etc.).  
• Perform the Learning procedure after turning off any nearby  
apparatus, such as an air-conditioner or infrared headphones.  
• The Remote Commander may fail to learn remote control signals  
near plasma TVs. Avoid learning near plasma TVs or turn off  
the plasma TV when learning.  
• The Remote Commander may fail to learn remote control signals  
under strong fluorescent light.  
• The Remote Commander may fail to learn remote control signals  
if the component generates interference. In this case, move away  
from the component when programming the Remote  
Commander.  
If a noise is included in the learned signals, you may not operate a  
component. In this case, refer to “The Remote Commander fails to  
learn remote control signals” above.  
I cannot operate a component  
even after I programmed  
remote control signals with the  
“learning” function.  
If you do not operate for more than 60 seconds during setting  
mode, the Remote Commander automatically exits the setting  
mode and turns off. Perform the next operation step within 60  
seconds.  
The setting mode  
unintentionally quits while  
setting up.  
Others  
Solution  
Problem  
When you have a multi-purpose component (such as a DVD/VCR  
combo), select only one of either component type. For example, in  
the case of a DVD/VCR combo, select “DVD” or ”VCR.” If you  
select both components, the XPRESS function will not work  
properly.  
I want to use an XPRESS  
function for multi-purpose  
components (VCR+DVD,  
TV+VCR, DVD+RCVR (receiver),  
etc.).  
You can set multiple XPRESS functions for one component. For  
example, when you watch a DVD, you can set the sound to output  
from the TV. Or, when you listen to a CD, you can set the sound to  
output from the RCVR (Receiver/Amplifier).  
I want to set a DVD player for  
both XPRESS-DVD and  
XPRESS-CD.  
• Make sure to install the USB driver properly (page 10).  
• If the connection goes thorough a HUB, some PCs do not recognize  
it. In this case, connect it directly to the USB port of your PC.  
• If “E” is shown in the display, replace the batteries with new  
ones and reconnect the Remote Commander to your PC. If your  
PC still cannot recognize the USB connection, restart your PC.  
My PC cannot recognize the  
USB connection.  
Customer Support Information  
After you have read through this manual, if you still cannot get the Remote Commander to work  
properly, call the Sony Customer Support Helpline at 1-800-822-2217.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Table of preset functions  
Note  
There may be some components or functions that cannot be operated.  
BUTTON  
POWER  
INPUT  
1 - 9, 0  
TV  
DVD player  
To turn on and off on the TV  
To change the input mode  
To decide the channel  
To turn on and off on the DVD  
To set items selected from the screen  
•(Dot)  
ENT  
To enter the subchannel number  
To decide the channel  
+10: To select numbers 10 and above  
To enter a setting or to set items  
selected from the screen  
VOL +/–  
MUTING  
Volume up/down on the TV  
Volume up/down on the TV  
To silence the sound on the TV. Press  
To silence the sound on the TV. Press  
again to return to the previous volume again to return to the previous volume  
level.  
level.  
CH +  
Channel up on the TV  
NEXT: To proceed to the next location  
or track  
CH –  
Channel down on the TV  
PREVIOUS: To proceed to the  
previous location or track  
RECALL  
To select the channel previously  
selected  
DIGITAL/  
ANALOG  
To switch between analog and digital  
channels.  
SUB TITLE: To switch the subtitle  
TWIN VIEW To turn on/off the Twin View mode.  
TOP MENU: To display the top menu  
INFO  
DISPLAY: To display the current  
channel on the TV  
To display the current play status on  
the screen  
GUIDE  
MENU  
V/b/v/B  
OK  
To use the program guide  
To call up the menu  
To call up the menu  
To move the cursor  
To move the cursor  
To enter the selection of the menu  
To exit the menu  
To enter the selection of the menu  
EXIT  
RETURN: To return to the previous  
display on the menu  
TOOLS  
To go into the option setting mode  
N
PIP SWAP: To swap the main picture  
and the sub picture  
To play  
m
M
x
To rewind  
To fast-forward  
To stop  
X
To pause  
REC z  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BUTTON  
POWER  
INPUT  
1 - 9, 0  
CD player  
DVR (Digital Video Recorder)  
To turn on and off on the DVR  
To change the input mode  
To decide the channel  
To turn on and off on the CD  
To select the track number  
•(Dot)  
ENT  
+10: To select numbers 10 and above  
To enter the subchannel number  
To decide the channel  
To enter the selected track number  
VOL +/–  
MUTING  
Volume up/down on the receiver.  
Volume up/down on the TV  
To silence the sound on the receiver.  
Press again to return to the previous  
volume level.  
To silence the sound on the TV. Press  
again to return to the previous volume  
level.  
CH +  
NEXT: To proceed the next track  
Channel up on the DVR  
CH –  
PREVIOUS: To proceed the previous  
track  
Channel down on the DVR  
RECALL  
To select the channel previously  
selected  
DIGITAL/  
ANALOG  
TWIN VIEW  
FAVORITE: To use the “FAVORITE”  
function  
INFO  
DISPLAY: To switch the display of the To display program information  
CD player to turn on/off  
GUIDE  
MENU  
V/b/v/B  
OK  
To use the program guide  
To call up the menu  
To move the cursor  
To enter the selection of the menu  
To exit the menu  
EXIT  
TOOLS  
OPTION: To go into the option setting  
mode  
N
To play  
To play  
m
M
x
To rewind  
To fast-forward  
To stop  
To rewind  
To fast-forward  
To stop  
X
To pause  
To pause  
REC z  
To record *  
* In order to avoid recording by mistake, recording starts after holding down the REC button for  
more than 2 seconds.  
Continued  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of preset functions (continued)  
BUTTON  
POWER  
INPUT  
1 - 9, 0  
Digital Satellite (SAT)  
Analog Cable box (CBL)  
To turn on and off on the SAT  
To change the input mode  
To decide the channel  
To turn on and off on the CBL  
To decide the channel  
•(Dot)  
ENT  
To enter the subchannel number  
To decide the channel  
+100: To select numbers 100 and above  
To decide the channel  
VOL +/–  
MUTING  
Volume up/down on the TV  
Volume up/down on the TV  
To silence the sound on the TV. Press  
To silence the sound on the TV. Press  
again to return to the previous volume again to return to the previous volume  
level.  
level.  
CH +  
Channel up on the SAT  
Channel up on the CBL  
CH –  
Channel down on the SAT  
Channel down on the CBL  
RECALL  
To select the channel previously  
selected  
To select the channel previously  
selected  
DIGITAL/  
ANALOG  
TWIN VIEW FAVORITE: To use the “FAVORITE”  
function  
INFO  
DISPLAY: To turn on the display  
DISPLAY: To turn on the display  
GUIDE  
MENU  
V/b/v/B  
OK  
To use the program guide  
To call up the menu  
To move the cursor  
To enter the selection of the menu  
To exit the menu  
EXIT  
TOOLS  
OPTION: To go into the option setting  
mode  
N
m
M
x
X
REC z  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BUTTON  
POWER  
INPUT  
1 - 9, 0  
VCR (Video Cassette Recorder)  
To turn on and off on the VCR  
To change the input mode  
To decide the channel  
Receiver (RCVR)  
To turn on and off on the RCVR  
To change the input mode  
To select the frequency of the  
broadcast  
•(Dot)  
ENT  
+10: To select numbers 10 and above  
To decide the channel  
To decide the selected frequency of the  
broadcast  
VOL +/–  
MUTING  
Volume up/down on the TV  
Volume up/down on the receiver.  
To silence the sound on the TV. Press  
To silence the sound on the receiver.  
again to return to the previous volume Press again to return to the previous  
level.  
volume level.  
CH +  
Channel up on the VCR  
Presetting or tuning to a higher  
frequency: +  
CH –  
Channel down on the VCR  
Presetting or tuning to a lower  
frequency: -  
RECALL  
SHIFT: To shift band or preset select  
DIGITAL/  
ANALOG  
TWIN VIEW  
INFO  
DISPLAY: To activate the on-screen  
display  
GUIDE  
MENU  
V/b/v/B  
OK  
BAND: To select the tuner band  
To call up the menu  
To call up the menu  
To move the cursor  
To move the cursor  
To enter the selection of the menu  
To exit the menu  
To enter the selection of the menu  
To exit the menu  
EXIT  
TOOLS  
N
To play  
m
M
x
To rewind  
To fast-forward  
To stop  
X
To pause  
REC z  
To record *  
* In order to avoid recording by mistake, recording starts after holding down the REC button for  
more than 2 seconds.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed on 100% recycled paper  
Printed in Malaysia  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Calculator EL480SRB User Manual
Sharp Microwave Oven R 959SLM AA User Manual
Sonance Portable Speaker VP45R User Manual
Sony CRT Television KV XJ29 User Manual
Sony Network Router CI 100 User Manual
Sony Portable Media Storage SDZ 100 User Manual
Sony VCR SVX 800 User Manual
Sterling Fan Royal User Manual
Sub Zero Refrigerator BI 36UG F User Manual
Sylvania MP3 Player SMPK6958 User Manual