4-234-334-32(2)
FM Stereo
FM-AM Receiver
Operating Instructions
STR-DE875
2001 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
TABLE OF CONTENTS
The instructions in this manual is for model STR-DE875.
Check your model number by looking at the lower right
corner of the front panel.
Hooking Up the Components 4
Unpacking
4
Antenna Hookups
5
Audio Component Hookups
Video Component Hookups
Digital Component Hookups
MULTI CH IN Hookups 10
Other Hookups 11
6
7
8
About area codes
The area code of the player you purchased is shown on the
lower portion of the rear panel (see the illustration below).
RUND
CENTER
FRONT
L
L
R
IANCE USE
8
–
16Ω
IMPEDANCE USE
4
–
16Ω
SPEAKERS
Hooking Up and Setting Up the
Speaker System 13
FRONT
4
Ω
8Ω
IMPEDANCE
SELECTOR
AC OUTLET
4-XXX-XXX-XX AA
Area code
Speaker System Hookup 14
Performing Initial Setup Operations 16
Multi Channel Surround Setup 17
Before You Use Your Receiver 22
Any differences in operation, according to the area code, are
clearly indicated in the text, for example, “Models of area
code AA only”.
Location of Parts and Basic
Conventions
Operations 23
• The instructions in this manual describe the controls on
the receiver. You can also use the controls on the
supplied remote if they have the same or similar names
as those on the receiver.
• The following icon is used in this manual:
zIndicates hints and tips for making the task easier.
Front Panel Parts Descriptions 23
Enjoying Surround Sound 28
Selecting a Sound Field 29
Understanding the Multi-Channel Surround
Displays 32
This receiver incorporates Dolby* Digital and Pro Logic
Surround and the DTS** Digital Surround System.
Customizing Sound Fields 34
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol ; are trademarks of
Dolby Laboratories.
Confidential unpublished Works. © 1992-1997 Dolby Laboratories.
All rights reserved.
*
Receiving Broadcasts 42
Direct Tuning 44
Automatic Tuning 44
Preset Tuning 45
**Manufactured under license from Digital Theater Systems, Inc. US
Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other
Other Operations 46
world-wide patents issued and pending. “DTS”, “ES” and “DTS
Digital Surround” are trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2000 Digital Theater Systems, Inc. All rights
reserved.
Naming Preset Stations and Program Sources 47
Recording 47
Using the Sleep Timer 48
Adjustment Using the SET UP Button 49
CONTROL A1 Control System 50
Additional Information 52
Troubleshooting 52
Specifications 54
Glossary 56
Table of settings using SURR, LEVEL, EQ, and SET
UP buttons 57
Remote Button Description 59
Index Back cover
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
Hooking Up
the
Components
Check that you received the following items with the
receiver:
• FM wire antenna (1)
• AM loop antenna (1)
• R6 (size-AA) batteries (2)
• Remote commander (remote) (1)
This chapter describes how to connect
various audio and video components
to the receiver. Be sure to read the
sections for the components you have
before you actually connect them to
the receiver.
Inserting batteries into the remote
Insert R6 (size-AA) batteries with the + and – properly
oriented in the battery compartment. When using the
remote, point it at the remote sensor g on the receiver.
z
When to replace batteries
Under normal conditions, the batteries should last for about 6
months. When the remote no longer operates the receiver, replace
all batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or lighting
apparatuses. Doing so may cause a malfunction.
• If you don’t use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the AC power cord until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum and
noise.
• When connecting an audio/video cord, be sure to
match the color-coded pins to the appropriate jacks on
the components: yellow (video) to yellow; white (left,
audio) to white; and red (right, audio) to red.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Hookups
AM loop antenna
(supplied)
FM wire antenna
(supplied)
SURROUND
CENTER
FRONT
DIGITAL
OPTICAL
ANTENNA
DVD/LD IN
TV/SAT IN
L
L
R
R
AM
S-VIDEO
OUT
S-VIDEO
IN
S-VIDEO
IN
S-VIDEO
OUT
S-VIDEO
IN
CONTROL A1
MD/TAPE IN
IMPEDANCE USE
8
–
16Ω
IMPEDANCE USE
4
–
16Ω
COAXIAL
SPEAKERS
VIDEO OUT
MD/TAPE OUT
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT VIDEO IN
FM
75Ω
MONITOR
COAXIAL
DVD/LD
IN
U
AUDIO
OUT
SIGNAL GND
L
L
L
L
L
FRONT
CENTER
4Ω
8Ω
R
R
R
R
R
SUB
IN
IN
OUT
IN
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
IMPEDANCE
SELECTOR
SUB
FRONT SURROUND
WOOFER
TV/SAT DVD/LD VIDEO 2
VIDEO 1
WOOFER
PHONO
CD/SACD MD/TAPE
AC OUTLET
MULTI CH IN
z
If you have poor FM reception
Terminals for connecting the antennas
Use a 75-ohm coaxial cable (not supplied) to connect the receiver
to an outdoor FM antenna as shown below.
Connect the
To the
AM loop antenna
FM wire antenna
AM terminals
Outdoor FM antenna
FM 75Ω COAXIAL terminal
Receiver
ANTENNA
Notes on antenna hookups
AM
• To prevent noise pickup, keep the AM loop antenna
away from the receiver and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
Ground wire
(not supplied)
COAXIAL
FM
75Ω
To ground
Important
If you connect the receiver to an outdoor antenna, ground
it against lightning. To prevent a gas explosion, do not
connect the ground wire to a gas pipe.
Note
Do not use the U SIGNAL GND terminal for grounding the
receiver.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Component Hookups
Required cords
Audio cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
MD/TAPE deck
INPUT OUTPUT
LINE
LINE
L
White (L)
Red (R)
White (L)
Red (R)
R
Turntable
OUT
IN
SURROUND
CENTER
FRONT
DIGITAL
OPTICAL
ANTENNA
DVD/LD IN
TV/SAT IN
L
L
R
R
AM
S-VIDEO
OUT
S-VIDEO
IN
S-VIDEO
IN
S-VIDEO
OUT
S-VIDEO
IN
CONTROL A1
MD/TAPE IN
IMPEDANCE USE
8
–
16Ω
IMPEDANCE USE
4
–
16Ω
COAXIAL
SPEAKERS
VIDEO OUT
MD/TAPE OUT
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT VIDEO IN
FM
75Ω
MONITOR
COAXIAL
DVD/LD
IN
U
AUDIO
OUT
SIGNAL GND
L
L
L
L
L
FRONT
CENTER
4Ω
8Ω
R
R
R
R
R
SUB
IN
IN
OUT
IN
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
IMPEDANCE
SELECTOR
SUB
FRONT SURROUND
WOOFER
TV/SAT DVD/LD VIDEO 2
VIDEO 1
WOOFER
PHONO
CD/SACD MD/TAPE
AC OUTLET
MULTI CH IN
OUTPUT
LINE
L
R
CD or SACD player
Jacks for connecting audio components
Note on audio component hookups
If your turntable has a ground wire, connect it to the
U SIGNAL GND terminal on the receiver.
Connect a
To the
Turntable
PHONO jacks
CD/SACD jacks
MD/TAPE jacks
CD or SACD player
MD deck or tape deck
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Component Hookups
Required cords
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
Yellow (video)
White (L/audio)
Red (R/audio)
Yellow (video)
White (L/audio)
Red (R/audio)
DVD or LD player
TV or satellite tuner
OUTPUT
OUTPUT
AUDIO OUT
VIDEO
OUT
AUDIO OUT
VIDEO
OUT
L
L
R
R
Video cord for connecting a TV monitor (not supplied)
Yellow
Yellow
SURROUND
CENTER
FRONT
DIGITAL
OPTICAL
ANTENNA
DVD/LD IN
TV/SAT IN
L
L
R
R
AM
S-VIDEO
OUT
S-VIDEO
IN
S-VIDEO
IN
S-VIDEO
OUT
S-VIDEO
IN
CONTROL A1
MD/TAPE IN
IMPEDANCE USE
8
–
16Ω
IMPEDANCE USE
4
–
16Ω
COAXIAL
SPEAKERS
VIDEO OUT
MD/TAPE OUT
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT VIDEO IN
FM
75Ω
MONITOR
COAXIAL
DVD/LD
IN
U
AUDIO
OUT
SIGNAL GND
L
L
L
L
L
FRONT
CENTER
4Ω
8Ω
R
R
R
R
R
SUB
IN
IN
OUT
IN
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
IMPEDANCE
SELECTOR
SUB
FRONT SURROUND
WOOFER
TV/SAT DVD/LD VIDEO 2
VIDEO 1
WOOFER
PHONO
CD/SACD MD/TAPE
AC OUTLET
MULTI CH IN
OUT
IN
OUT
IN
INPUT OUTPUT
INPUT OUTPUT
INPUT
VIDEO
IN
VIDEO
OUT
VIDEO
IN
VIDEO
OUT
VIDEO
IN
AUDIO
IN
AUDIO
OUT
AUDIO
IN
AUDIO
OUT
L
L
R
R
TV monitor
VCR
VCR
Jacks for connecting video components
Note on video component hookups
You can connect your TV’s audio output jacks to the TV/
SAT AUDIO IN jacks on the receiver and apply sound
effects to the audio from the TV. In this case, do not
connect the TV’s video output jack to the TV/SAT VIDEO
IN jack on the receiver. If you are connecting a separate
TV tuner (or satellite tuner), connect both the audio and
video output jacks to the receiver as shown above.
Connect a
To the
TV or satellite tuner
VCR
TV/SAT jacks
VIDEO 1 jacks
VIDEO 2 jacks
DVD/LD jacks
MONITOR VIDEO OUT jack
Additional VCR
DVD or LD player
TV monitor
z
When using the S-video jacks instead of the video jacks
Your monitor must also be connected via an S-video jack. S-video
signals are on a separate bus from the video signals and will not
be output through the video jacks.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Component Hookups
Connect the digital output jacks of your DVD player and
satellite tuner (etc.) to the receiver’s digital input jacks to
bring the multi channel surround sound of a movie
theater into your home. To enjoy full effect of multi
channel surround sound, five speakers (two front
speakers, two surround speakers, and a center speaker)
and a sub woofer are required. You can also connect an
LD player with an RF OUT jack via an RF demodulator,
like the Sony MOD-RF1 (not supplied).
Required cords
Optical digital cords (not supplied)
Black
Black
Coaxial digital cord (not supplied)
Yellow
Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
TV or satellite tuner
DVD or LD player (etc.)*
Yellow (video)
White (L/audio)
Red (R/audio)
Yellow (video)
White (L/audio)
Red (R/audio)
OUTPUT
VIDEO
OUT
OUTPUT
VIDEO
OUT
AUDIO
OUT
AUDIO
OUT
OUTPUT
DIGITAL
COAXIAL
OUTPUT
DIGITAL
OPTICAL
OUTPUT
DIGITAL
OPTICAL
L
L
R
R
SURROUND
CENTER
FRONT
DIGITAL
OPTICAL
ANTENNA
DVD/LD IN
TV/SAT IN
L
L
R
R
AM
S-VIDEO
OUT
S-VIDEO
IN
S-VIDEO
IN
S-VIDEO
OUT
S-VIDEO
IN
CONTROL A1
MD/TAPE IN
IMPEDANCE USE
8
–
16Ω
IMPEDANCE USE
4
–
16Ω
COAXIAL
SPEAKERS
VIDEO OUT
MD/TAPE OUT
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT VIDEO IN
FM
75Ω
MONITOR
COAXIAL
DVD/LD
IN
U
AUDIO
OUT
SIGNAL GND
L
L
L
L
L
FRONT
CENTER
4Ω
8Ω
R
R
R
R
R
SUB
IN
IN
OUT
IN
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
IMPEDANCE
SELECTOR
SUB
FRONT SURROUND
WOOFER
DVD/LD VIDEO 2
VIDEO 1
WOOFER
TV/SAT
PHONO
CD/SACD MD/TAPE
AC OUTLET
MULTI CH IN
When making digital audio connections to a DVD player, connect to either the coaxial OR optical digital jacks, and not both. It is recommended to
make digital audio connections to the coaxial jack.
*
Example of LD player connected via an RF demodulator
Please note that you cannot connect an LD player’s DOLBY DIGITAL RF OUT jack directly to the receiver’s digital input
jacks. You must first convert the RF signal to either an optical or coaxial digital signal. Connect the LD player to the RF
demodulator, then connect the RF demodulator’s optical or coaxial digital output to the receiver’s OPTICAL or COAXIAL
DVD/LD IN jack. Refer to the instruction manual supplied with your RF Demodulator for details on DOLBY DIGITAL RF
hookups.
DVD/LD
VIDEO IN
VIDEO OUT
DIGITAL
DIGITAL
DVD/LD IN
DVD/LD IN
MASTER VOLUME
+
MULTI CHANNEL DECODING
?
/
1
DOLBY DIGITAL
RF OUT
(COAXIAL)
(COAXIAL)
LD player
RF demodulator
–
(OPTICAL)
or (OPTICAL)
SPEAKERS
PHONES
DISPLAY
DIMMER
LEVEL
SURR
SET UP
NAME
MUTING
CINEMA STUDIO EX
B
DIGITAL CONCERT HALL 6.1 CH DECODING
PRESET
TUNING
EQ
–
+
–
TUNING
FM
+
A
C
A
B
FUNCTION
INPUT MODE
MODE
SOUND FIELD
MODE
MULTI /2CH A. DIRECT
MEMORY SHIFT FM MODE
AM
EQUALIZER
A.F.D.
2CH
ENTER
Note
When making connections as shown above, be sure to set INPUT MODE (q; on page 25) manually. This unit may not operate correctly if
INPUT MODE is set to “AUTO 2CH” or “AUTO MULTI CH”.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the digital output jacks of your MD or tape deck
to the receiver’s digital input jack and connect the digital
input jacks of your MD or tape deck to the receiver’s
digital output jack. These connections allow you to make
digital recordings of a CDs played back through your
DVD (or LD player) and satellite broadcasts.
Required cords
Optical digital cords (not supplied)
Black
Black
Audio cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
MD or tape deck
White (L)
Red (R)
White (L)
Red (R)
INPUT OUTPUT
DIGITAL
LINE
LINE
OPTICAL
IN
L
OUT
R
IN
OUT
OUT
IN
SURROUND
CENTER
FRONT
DIGITAL
OPTICAL
ANTENNA
DVD/LD IN
TV/SAT IN
L
L
R
R
AM
S-VIDEO
OUT
S-VIDEO
IN
S-VIDEO
IN
S-VIDEO
OUT
S-VIDEO
IN
CONTROL A1
MD/TAPE IN
IMPEDANCE USE
8
–
16Ω
IMPEDANCE USE
4
–
16Ω
COAXIAL
SPEAKERS
VIDEO OUT
MD/TAPE OUT
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT VIDEO IN
FM
75Ω
MONITOR
COAXIAL
DVD/LD
IN
U
AUDIO
OUT
SIGNAL GND
L
L
L
L
L
FRONT
CENTER
4Ω
8Ω
R
R
R
R
R
SUB
IN
IN
OUT
IN
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
IMPEDANCE
SELECTOR
SUB
FRONT SURROUND
WOOFER
TV/SAT DVD/LD VIDEO 2
VIDEO 1
WOOFER
PHONO
CD/SACD MD/TAPE
AC OUTLET
MULTI CH IN
Notes
• Please note that you cannot make a digital recording of a digital multi channel surround signal.
• To make a digital recording from your CD or SACD player, connect the CD or SACD player’s digital output directly to the digital input
on your MD or tape deck. Refer to the instructions supplied with your CD or SACD player and MD or tape deck for details.
• The DVD/LD IN OPTICAL and COAXIAL jacks are compatible with 96 kHz, 48 kHz, 44.1 kHz and 32 kHz sampling frequencies. The
other OPTICAL jacks are compatible with 48 kHz, 44.1 kHz and 32 kHz sampling frequencies.
• It is not possible to record analog signals to MD/TAPE and VIDEO with only digital connections. To record analog signals, make analog
connections. To record digital signals, make digital connections.
• Input signals with 96 kHz sampling frequencies to the DVD/LD IN OPTICAL or COAXIAL jacks. Using other jacks may result in
intermittent sound.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTI CH IN Hookups
Although this receiver incorporates a multi channel
decoder, it is also equipped with MULTI CH IN jacks.
These connections allow you to enjoy multichannel
software encoded in formats other than Dolby Digital and
DTS. If your DVD player is equipped with MULTI CH
OUTPUT jacks, you can connect them directly to the
receiver to enjoy the sound of the DVD player’s multi
channel decoder. Alternatively, the MULTI CH IN jacks
can be used to connect an external multi channel decoder.
To fully enjoy multi channel surround sound, you will
need five speakers (two front speakers, two surround
speakers, and a center speaker) and a sub woofer. Refer to
the instruction manual supplied with your DVD player,
multi channel decoder, etc., for details on the multi
channel input hookups.
Required cords
Audio cords (not supplied)
Two for the MULTI CH IN FRONT and SURROUND jacks
White (L)
White (L)
Red (R)
Red (R)
Monaural audio cords (not supplied)
Two for the MULTI CH IN CENTER and SUB WOOFER jacks
Black
Black
Video cord (not supplied)
One for the DVD/LD VIDEO IN jacks (etc.)
Yellow
Yellow
Notes
• When using the connections described below, adjust the level
of your surround speakers and sub woofer from the DVD
player or multichannel decoder.
• When you set the center speaker to use as the surround back
speaker in the speaker settings, the signal input at the MULTI
CH IN CENTER jack is directly output from the surround back
speaker. For details about the speaker settings, refer to “Multi
Channel Surround Setup” on pages 17 – 21.
DVD player,
Multichannel decoder, etc.
MULTI CH OUTPUT
SURROUND
FRONT
CENTER
SUB
WOOFER
SURROUND
CENTER
FRONT
DIGITAL
OPTICAL
ANTENNA
DVD/LD IN
L
L
R
R
AM
TV/SAT IN
S-VIDEO
OUT
S-VIDEO
IN
S-VIDEO
IN
S-VIDEO
OUT
S-VIDEO
IN
CONTROL A1
MD/TAPE IN
IMPEDANCE USE
8
–
16Ω
IMPEDANCE USE
4
–
16Ω
COAXIAL
SPEAKERS
VIDEO OUT
MD/TAPE OUT
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT VIDEO IN
FM
75
Ω
MONITOR
COAXIAL
DVD/LD
IN
U
AUDIO
OUT
SIGNAL GND
L
L
L
L
L
FRONT
CENTER
4Ω
8Ω
R
R
R
R
R
SUB
IN
IN
OUT
IN
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
IMPEDANCE
SELECTOR
SUB
FRONT SURROUND
WOOFER
TV/SAT DVD/LD VIDEO 2
VIDEO 1
WOOFER
PHONO
CD/SACD MD/TAPE
AC OUTLET
MULTI CH IN
Example of a DVD player hookup using the MULTI CH IN jacks
Front Speaker (L)
Front Speaker (R)
DVD/LD
SPEAKERS
Surround Speaker (L)
Surround Speaker (R)
VIDEO IN etc.
VIDEO OUT
DVD player
MULTI CH IN
FRONT
MASTER VOLUME
+
MULTI CHANNEL DECODING
?
/
1
SPEAKERS
SURROUND/CENTER
SUB WOOFER
–
SPEAKERS
PHONES
DISPLAY
DIMMER
LEVEL
SURR
SET UP
NAME
MUTING
CINEMA STUDIO EX
B
DIGITAL CONCERT HALL 6.1 CH DECODING
PRESET
TUNING
EQ
–
+
–
TUNING
FM
+
A
C
A
B
FUNCTION
Center Speaker
Active Woofer
INPUT MODE
MODE
SOUND FIELD
MODE
MULTI /2CH A. DIRECT
MEMORY SHIFT FM MODE
AM
EQUALIZER
A.F.D.
2CH
ENTER
Note
See page 14 for details on speaker system hookup.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Hookups
Required cords
Audio cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to the
appropriate jacks on the components.
White (L)
Red (R)
White (L)
Red (R)
CONTROL A1 connecting cord (not supplied)
Black
Black
AC power cord
CONTROL A1
VOLTAGE SELECTOR**
SURROUND
CENTER
FRONT
DIGITAL
VOLTAGE SELECTOR
OPTICAL
ANTENNA
120V
240V
220V
DVD/LD IN
L
L
R
R
AM
TV/SAT IN
S-VIDEO
OUT
S-VIDEO
IN
S-VIDEO
IN
S-VIDEO
OUT
S-VIDEO
IN
CONTROL A1
MD/TAPE IN
IMPEDANCE USE
8
–
16Ω
IMPEDANCE USE
4
–
16Ω
COAXIAL
SPEAKERS
VIDEO OUT
MD/TAPE OUT
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT VIDEO IN
FM
75Ω
MONITOR
COAXIAL
DVD/LD
IN
U
AUDIO
OUT
SIGNAL GND
L
L
L
L
L
FRONT
CENTER
4Ω
8Ω
R
R
R
R
R
SUB
IN
IN
OUT
IN
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
IMPEDANCE
SELECTOR
SUB
FRONT SURROUND
WOOFER
TV/SAT DVD/LD VIDEO 2
VIDEO 1
WOOFER
PHONO
CD/SACD MD/TAPE
AC OUTLET
MULTI CH IN
b
To a wall outlet
AC OUTLET*
* The configuration, shape, and number of AC outlets on the rear panel varies according to the model and country to which the receiver is shipped.
** Models of area code E2, E3 only.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Hookups
CONTROL A1 hookup
Connecting the AC power cord
• If you have a CONTROL A1 compatible Sony
CD player, SACD player, tape deck, or MD deck
Use a CONTROLA1 cord (not supplied) to connect the
CONTROL A1 jack on the CD player, SACD player,
tape deck, or MD deck to the CONTROL A1 jack on
the receiver. Refer to “CONTROL A1 Control System”
on page 50 and the operating instructions supplied with
your CD player, SACD player, tape deck, or MD deck
for details.
Before connecting the AC power cord of this receiver to a
wall outlet:
• Connect the speaker system to the receiver (see page
14).
Connect the AC power cord(s) of your audio/video
components to a wall outlet.
If you connect other audio/video components to the AC
OUTLET(s) on the receiver, the receiver will supply power
to the connected component(s), allowing you to turn the
whole system on or off when you turn the receiver on or
off.
Note
If you make CONTROL A1 connections from the receiver to
an MD deck that is also connected to a computer, do not
operate the receiver while using the “Sony MD Editor”
software. This may cause a malfunction.
Caution
Make sure that the total power consumption of the component(s)
connected to the receiver’s AC OUTLET(s) does not exceed the
wattage stated on the rear panel. Do not connect high-wattage
electrical home appliances such as electric irons, fans, or TVs to
this outlet.
• If you have a Sony CD changer with a
COMMAND MODE selector
If your CD changer’s COMMAND MODE selector can
be set to CD 1, CD 2, or CD 3, be sure to set the
command mode to “CD 1” and connect the changer to
the CD jacks on the receiver.
If, however, you have a Sony CD changer with VIDEO
OUT jacks, set the command mode to “CD 2” and
connect the changer to the VIDEO 2 jacks on the
receiver.
Setting the VOLTAGE SELECTOR (Models of
area code E2, E3 only)
Check that the voltage selector on the rear panel of the
player is set to the local power line voltage. If not, set the
selector to the correct position using a screwdriver before
connecting the AC power cord to a wall outlet.
120 V 240 V 220 V
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Jog dial
Hooking Up
and Setting Up
the Speaker
System
MASTER VOLUME
+
MULTI CHANNEL DECODING
?
/ 1
–
DISPLAY
DIMMER
SPEAKERS
PHONES
LEVEL
SURR
SET UP
NAME
MUTING
CINEMA STUDIO EX
B
DIGITAL CONCERT HALL 6.1 CH DECODING
PRESET
TUNING
EQ
–
+
–
TUNING
FM
+
A
C
A
B
FUNCTION
INPUT MODE
MODE
SOUND FIELD
MODE
MULTI /2CH A. DIRECT
MEMORY SHIFT FM MODE
AM
EQUALIZER
A.F.D.
2CH
ENTER
Cursor buttons
This chapter describes how to hook
up your speaker system to the
Brief descriptions of buttons and control
used to set up the speaker system
receiver, how to position each speaker,
and how to set up your speakers to
enjoy multi channel surround sound.
SET UP button: Press to enter the setup mode when
specifying speaker types and distances.
Cursor buttons (
/
): Use to select parameters after
pressing the SET UP button.
Jog dial: Use to adjust the setting of each parameter.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker System Hookup
Required cords
Speaker cords (not supplied)
One for each front, surround, and center speaker
Front speaker (R)
Front speaker (L)
(+)
(–)
(+)
(–)
]
]
}
}
Monaural audio cord (not supplied)
One for an active sub woofer
Black
Black
SURROUND
CENTER
FRONT
DIGITAL
OPTICAL
ANTENNA
DVD/LD IN
L
L
R
R
AM
TV/SAT IN
S-VIDEO
OUT
S-VIDEO
IN
S-VIDEO
IN
S-VIDEO
OUT
S-VIDEO
IN
CONTROL A1
MD/TAPE IN
IMPEDANCE USE
8
–
16Ω
IMPEDANCE USE
4
–
16Ω
COAXIAL
SPEAKERS
VIDEO OUT
MD/TAPE OUT
FM
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT VIDEO IN
75
Ω
MONITOR
COAXIAL
DVD/LD
IN
U
AUDIO
OUT
SIGNAL GND
L
L
L
L
L
FRONT
CENTER
4Ω
8Ω
R
R
R
R
R
SUB
IN
IN
OUT
IN
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
IMPEDANCE
SELECTOR
SUB
FRONT SURROUND
WOOFER
TV/SAT DVD/LD VIDEO 2
VIDEO 1
WOOFER
PHONO
CD/SACD MD/TAPE
AC OUTLET
MULTI CH IN
IMPEDANCE
SELECTOR
INPUT
AUDIO
IN
]
]
}
}
]
}
Active sub woofer
Surround speaker (R)
Surround speaker (L)
Center speaker*
* You can connect a surround back speaker.
Notes on speaker system hookup
Terminals for connecting the speakers
• Twist the stripped ends of the speaker cords about
10 mm (2/3 inch). Be sure to match the speaker cord to
the appropriate terminal on the components: + to + and
– to –. If the cords are reversed, the sound will be
distorted and will lack bass.
• If you use speakers with low maximum input rating,
adjust the volume carefully to avoid excessive output
on the speakers.
Connect the
To the
Front speakers (8 or 4** ohm) SPEAKERS FRONT terminals
Surround speakers (8 ohm)
Center speaker (8 ohm)
Active sub woofer***
SPEAKERS SURROUND terminals
SPEAKERS CENTER terminals
SUB WOOFER AUDIO OUT jack
** See “Speaker impedance” on the next page.
*** You can connect an active sub woofer to either of the two jacks. The
remaining jack can be used to connect a second active sub woofer.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
To avoid short-circuiting the speakers
Speaker impedance
Short-circuiting of the speakers may damage the receiver.
To prevent this, make sure to take the following
precautions when connecting the speakers.
Set the IMPEDANCE SELECTOR for the front speakers as
indicated in the table below. Check the instruction manual
supplied with your speakers if you’re not sure of their
impedance. (This information is usually printed on a label
on the back of the speaker.)
Make sure the stripped ends of each speaker cord
do not touch another speaker terminal or the
stripped end of another speaker cord.
If the nominal impedance of Set IMPEDANCE SELECTOR to
your speaker is
Examples of poor conditions of the speaker cord
Between 4 and 8 ohms
8 ohms or higher
4Ω
8Ω
Speakers connected to the SURROUND and CENTER
SPEAKERS terminals must have a nominal impedance of
8 ohms or higher (regardless of the setting of the
IMPEDANCE SELECTOR).
Note
Stripped speaker cord is touching another speaker terminal.
Be sure to turn the power off when setting the IMPEDANCE
SELECTOR.
Stripped cords are touching each other due to excessive
removal of insulation.
After connecting all the components, speakers,
and AC power cord, output a test tone to check
that all the speakers are connected correctly. For
details on outputting a test tone, see page 21.
If no sound is heard from a speaker while outputting a
test tone or a test tone is output from a speaker other than
the one whose name is currently displayed on the
receiver, the speaker may be short-circuited. If this
happens, check the speaker connection again.
To avoid damaging your speakers
Make sure that you turn down the volume before you
turn off the receiver. When you turn on the receiver, the
volume remains at the level you turn off the receiver.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing Initial Setup Operations
Once you have hooked up the speakers and turned on the
Performing initial setup operations
power, clear the receiver’s memory. Then specify the
speaker parameters (size, position, etc.) and perform any
other initial setup operations necessary for your system.
Before using your receiver for the first time, adjust SET
UP parameters so that the receiver correspond to your
system. For the adjustable parameters, see the table on
page 58. See pages 17 – 21 for speaker settings and pages
49 – 50 for other settings.
Clearing the receiver’s memory
Before using your receiver for the first time or when you
want to clear the receiver’s memory, do the following.
This procedure is not necessary if the demonstration
activates when you turn the power on.
Demonstration Mode
The demonstration will activate the first time you turn on
the power. When the demonstration starts, the following
message appears in the display twice:
1/u
“Now Demonstration Mode!! To finish the
demonstration, please press POWER KEY while this
message appears in the display. Thank you!”
MASTER VOLUME
MULTI CHANNEL DECODING
+
?
/ 1
To cancel the demonstration
–
DISPLAY
DIMMER
SPEAKERS
PHONES
LEVEL
Press ?/1 to turn the receiver off while the above message
is being displayed. The next time you turn the receiver on,
the demonstration will not appear.
SURR
SET UP
NAME
MUTING
CINEMA STUDIO EX
B
DIGITAL CONCERT HALL 6.1 CH DECODING
PRESET
TUNING
EQ
–
+
–
TUNING
FM
+
A
C
A
B
FUNCTION
INPUT MODE
MODE
SOUND FIELD
MODE
MULTI /2CH A. DIRECT
MEMORY SHIFT FM MODE
AM
EQUALIZER
A.F.D.
2CH
ENTER
To view the demonstration
Hold down SET UP and press ?/1 to turn on the power.
1 Turn off the receiver.
2 Hold down ?/1 for 5 seconds.
Notes
• Running the demonstration will clear the receiver’s
memory. For details on what will be cleared, see
“Clearing the receiver's memory” on this page.
• You cannot cancel demonstration if you did not press
?/1 while the above message is being displayed. To
cancel demonstration after the above message appears,
press ?/1 twice to activate the demonstration again.
Then, press ?/1 while the above message is being
displayed.
The currently selected function, followed by the
demonstration message appears in the display. All of
the following items are reset or cleared:
• All preset stations are reset or cleared.
• All sound field parameters are reset to their factory
settings.
• All index names (of preset stations and program
sources) are cleared.
• All SET UP parameters are reset to their factory
settings.
• The sound field memorized for each program source
and preset stations are cleared.
• The MASTER VOLUME is set to VOLUME MIN.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi Channel Surround Setup
z
For the best possible surround sound all speakers should
be the same distance from the listening position (A).
However, this unit lets you to place the center speaker up
to 1.5 meters (5 feet) closer (B) or the surround back
speakers up to 4.5 meters (15 feet) closer (D) and the
surround speakers up to 4.5 meters (15 feet) closer (C) to
the listening position. The front speakers can be placed
from 1.0 to 12.0 meters (3 to 40 feet ) from the listening
position (A).
When setting up the surround back speaker
Set the speaker at least one meter behind the listening position. It
is recommended to place the speaker at an equal distance from
the surround left or right speakers. If there is no space behind the
listening position, set the speaker above the listening position by
placing it on a stand or hanging it from the ceiling. To prevent
speaker damage or injury in case the speaker falls, make sure that
it is properly fixed in place.
Note
You can place the surround speakers either behind you or
to the side, depending on the shape of your room (etc.).
Do not place the center speaker farther away from the listening
position than the front speakers.
You can use the center speaker as a surround back
speaker.
Specifying the speaker parameters
When placing surround speakers to your side
1 Press ?/1 to turn on the receiver.
B
2 Press SET UP.
A
A
3 Press the cursor buttons ( or ) to select the
45°
parameter you want to adjust.
4 Turn the jog dial to select the setting you want.
The setting is stored automatically.
C
C
90°
5 Repeat steps 3 and 4 until you have set all of the
parameters that follow.
x Front speaker size (FRONT)
Initial setting : LARGE
D
20°
• If you connect large speakers that will effectively
reproduce bass frequencies, select “LARGE”. Normally,
select “LARGE”.
When placing the surround speakers behind you
• If the sound is distorted, or you feel a lack of surround
effects when using multi channel surround sound,
select “SMALL” to activate the bass redirection circuitry
and output the front channel bass frequencies from the
sub woofer.
• When the front speaker is set to “SMALL”, the center,
surround and surround back speakers are also
automatically set to “SMALL” (unless previously set to
“NO”).
B
A
A
45°
C
C
90°
D
20°
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi Channel Surround Setup
p Center speaker size (CENTER)
Initial setting : LARGE
x Surround back speaker size (SURR BACK)**
Initial setting : NO
• If you connect a large speaker that will effectively
reproduce bass frequencies, select “LARGE”. Normally,
select “LARGE”. However, if the front speakers are set
to “SMALL”, you cannot set the center speaker to
“LARGE”.
• If the sound is distorted, or you feel a lack of surround
effects when using multi channel surround sound,
select “SMALL” to activate the bass redirection circuitry
and output the center channel bass frequencies from the
front speakers (if set to “LARGE”) or sub woofer. *1
• If you do not connect a center speaker, select “NO”. The
sound of the center channel will be output from the
front speakers.*2
This parameter can be set when the center speaker is set to
“NO” and the surround speakers are set to “LARGE” or
“SMALL”.
• If you connect a large speaker that will effectively
reproduce bass frequencies, select “LARGE”. Normally,
select “LARGE”. However, if the front speakers are set
to “SMALL”, you cannot set the surround back speaker
to “LARGE”.
• If the sound is distorted, or you feel a lack of surround
effects when using multi channel surround sound,
select “SMALL” to activate the bass redirection circuitry
and output the center channel bass frequencies from the
front speakers (if set to “LARGE”) or sub woofer.
However, if the surround speakers are set to “SMALL”,
the surround back speaker is automatically set to
“SMALL”.
p Surround speaker size (SURROUND)
Initial setting : LARGE
• If you connect large speakers that will effectively
reproduce bass frequencies, select “LARGE”. Normally,
select “LARGE”. However, if the front speakers are set
to “SMALL”, you cannot set the surround speakers to
“LARGE”.
• If you do not connect a surround back speaker, select
“NO”.
** This parameter is not available when “Surround
speaker size (SURROUND)” is set to “NO”.
• If the sound is distorted, or you feel a lack of surround
effects when using multi channel surround sound,
select “SMALL” to activate the bass redirection circuitry
and output the surround channel bass frequencies from
the sub woofer or other “LARGE” speakers.
• If you do not connect surround speakers, select “NO”.*3
z
About speaker sizes (LARGE and SMALL)
Internally, the LARGE and SMALL settings for each speaker
determine whether or not the internal sound processor will cut
the bass signal from that channel. When the bass is cut from a
channel, the bass redirection circuitry sends the corresponding
bass frequencies to the sub woofer or other “LARGE” speakers.
However, since bass sounds have a certain amount of
directionality, it best not to cut them, if possible. Therefore, even
when using small speakers, you can set them to “LARGE” if you
want to output the bass frequencies from that speaker. On the
other hand, if you are using a large speaker, but prefer not to
have bass frequencies output from that speaker, set it to
“SMALL”.
z
*1~*3 correspond to the following Dolby Pro Logic modes
1
*
*
*
NORMAL
PHANTOM
3 STEREO
2
3
If the overall sound level is lower than you prefer, set all speakers
to “LARGE”. If there is not enough bass, you can use the
equalizer to boost the bass levels. To adjust the equalizer, see
page 36.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
z
About speaker distances
x Sub woofer selection (SUB WOOFER)
Initial setting : YES
• If you connect a sub woofer, select “YES”.
• If you do not connect a sub woofer, select “NO”. This
activates the bass redirection circuitry and outputs the
LFE signals from other speakers.
• In order to take full advantage of the Dolby Digital
bass redirection circuitry, we recommend setting the sub
woofer’s cut off frequency as high as possible.
This receiver allows you to input the speaker position in terms of
distance. However, it is not possible to set the center speaker
farther away than the front speakers. Also, the center speaker can
not be set more that 1.5 meters (5 feet) closer than the front
speakers.
Likewise, the surround and surround back speakers cannot be set
farther away from the listening position than the front speakers.
And they can be no more than 4.5 meters (15 feet) closer.
This is because incorrect speaker placement is not conducive to
enjoy the surround sound.
Please note that, setting the speaker distance closer than the
actual location of the speakers will cause a delay in the output of
the sound from that speaker. In other words, the speaker will
sound like it is farther away.
For example, setting the center speaker distance 1~2 m (3~6 feet)
closer than the actual speaker position will create a fairly realistic
sensation of being “inside” the screen. If you cannot obtain a
satisfactory surround effect because the surround speakers are
too close, setting the surround speaker distance closer (shorter)
than the actual distance will create a larger soundstage.
Adjusting these parameters while listening to the sound often
results in much better surround sound. Give it a try!
x Front speaker distance (FRONT XX.X)
Initial setting : 5.0 meter (16 feet)
Set the distance from your listening position to the front
(left or right) speaker (A on page 17).
x Center speaker distance (CENTER XX.X)
Initial setting : 5.0 meter (16 feet)
Set the distance from your listening position to the center
speaker. Center speaker distance should be set from a
distance equal to the front speaker distance (A on page
17) to a distance 1.5 meters (5 feet) closer to your listening
position (B on page 17). When this range is exceeded, the
display blinks. If you make the setting while the display
blinks, you cannot fully enjoy the surround effect.
x Sub woofer phase polarity (S.W PHASE)
Initial setting : NORMAL
Set the sub woofer phase polarity. There is usually no
problem when the sub woofer phase polarity is set to
“NORMAL”. However, depending on the type of front
speakers, the position of the sub woofer, and the cut-off
frequency of the sub woofer, setting the phase polarity to
“REVERSE” may produce better bass. Besides bass
reproduction, the richness and tightness of the overall
sound may also be affected. While listening from the main
listening position, select the setting that best suits your
environment.
x Surround speaker distance (SURROUND XX.X)
Initial setting : 3.5 meter (11 feet)
Set the distance from your listening position to the
surround speaker. Surround speaker distance should be
set from a distance equal to the front speaker distance (A
on page 17) to a distance 4.5 meters (15 feet) closer to your
listening position (C on page 17). When this range is
exceeded, the display blinks. If you make the setting
while the display blinks, you cannot fully enjoy the
surround effect.
x Distance unit (DISTANCE UNIT)
Initial setting : meter (feet)
x Surround back speaker distance (SURR BACK
XX.X)
Initial setting : 3.5 meter (11 feet)
Lets you select either feet or meters as the unit of measure
for setting distances.
Set the distance from your listening position to the
surround back speaker. Surround back speaker distance
should be set from a distance equal to the front speaker
distance (A on page 17) to a distance 4.5 meters (15 feet)
closer to your listening position (D on page 17). When
this range is exceeded, the display blinks. If you make the
setting while the display blinks, you cannot fully enjoy
the surround effect.
x Sub woofer distance (SUB WOOFER XX.X)
Initial setting : 5.0 meter (16 feet)
Set the distance from your listening position to the sub
woofer.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi Channel Surround Setup
x Surround speaker position (SURR POSI.)*
Initial setting : SIDE
This setting only affects the surround modes in the
“VIRTUAL” sound fields.
This parameter lets you specify the location of your
surround speakers for proper implementation of the
Digital Cinema Sound surround modes in the
“VIRTUAL” sound fields. Refer to the illustration below.
• Select “SIDE” if the location of your surround speakers
corresponds to section A.
• Select “MIDDLE” if the location of your surround
speakers corresponds to section B.
• Select “BEHIND”** if the location of your surround
speakers corresponds to section C.
B
A
B
A
60
30
This setting only effects the surround modes in the
“VIRTUAL” sound fields.
*
These parameters are not available when “Surround
speaker size“ is set to “NO”.
*** This parameter is not available when “Surround back
speaker size” is set to “NO”.
z
About the surround position (SIDE, MIDDLE and BEHIND)
This setting is designed specifically for implementation of the
Digital Cinema Sound modes in the “VIRTUAL” sound fields.
With the Digital Cinema Sound modes, speaker position is not as
critical as other modes. All of the modes in the “VIRTUAL”
sound fields were designed under the premise that the surround
speaker would be located behind the listening position, but
presentation remains fairly consistent even with the surround
speakers positioned at a rather wide angle. However, if the
speakers are pointing toward the listener from the immediate left
and right of the listening position, the “VIRTUAL” sound fields
will not be effective unless the surround speaker position
parameter is set to “SIDE”.
90°
A
A
60°
30°
B
B
C
C
20°
* These parameters are not available when “Surround
speaker size” is set to “NO”.
Nevertheless, each listening environment has many variables,
like wall reflections, and you may obtain better results using
“BEHIND” or “MIDDLE” if your speakers are located high above
the listening position, even if they are to the immediate left and
right.
Therefore, although it may result in a setting contrary to the
“Surround speaker position” explanation, we recommend that
you playback multi channel surround encoded software and
listen to the effect each setting has on your listening environment.
Choose the setting that provides a good sense of spaciousness
and that best succeeds in forming a cohesive space between the
surround sound from the surround speakers and the sound of the
front speakers. If you are not sure which sounds best, select
“BEHIND” and then use the speaker distance parameter and
speaker level adjustments to obtain proper balance.
** This parameter is only available when “Surround back
speaker size” is set to “NO”.
x Surround speaker height (SURR HEIGHT)*/
Surround back speaker height (SURR BACK
HGT.)***
Initial setting : LOW
This parameter lets you specify the height of your
surround and surround back speakers for proper
implementation of the Digital Cinema Sound surround
modes in the “VIRTUAL” sound fields. Refer to the
illustration below.
• Select “LOW” if the location of your surround speakers
corresponds to section A.
• Select “HIGH” if the location of your surround speakers
corresponds to section B.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
x Fro n t sp e a ke r cro sso ve r fre q u e n cy
(FRONT SP > XXX Hz)
3 To change the test tone mode, press the cursor
buttons ( or ) to select the mode you w ant.
Initial setting : STD (120Hz)
Lets you adjust the front speaker bass crossover frequency
when the front speakers are set to “SMALL”.
Mode
The test tone output
NORMAL
The test tone is output from each
speaker in sequence.
PHASE
The test tone is output from two
speakers at a time in sequence.
(There is no sound output from
the sub woofer.)
You can also adjust the balance
between speakers.
x Ce n t e r sp e a ke r cro sso ve r fre q u e n cy
(CENTER SP > XXX Hz)
Initial setting : STD (120 Hz)
Lets you to adjust the center speaker bass crossover
frequency when the center speaker is set to “SMALL”.
2CH SWAP
You can adjust the speaker levels
while listening to the source (not
the test tone). Turn on the
connected component, start
playing, then turn FUNCTION to
select the component (except
connected to the MULTI CH IN
jacks).
The sound of the front L/R
speakers is output from the
surround R/L speakers. You can
adjust the level of surround
speakers from the listening
position.
x Su rro u n d sp e a ke r cro sso ve r fre q u e n cy
(SURROUND SP > XXX Hz)
Initial setting : STD (120 Hz)
Lets you adjust the surround speaker bass crossover
frequency when the surround speakers are set to
“SMALL”.
x Su rro u n d b a ck cro sso ve r fre q u e n cy (SURR
BACK SP > XXX Hz)
Initial setting : STD (120 Hz)
Lets you adjust the surround back speaker bass crossover
frequency when the surround back speaker is set to
“SMALL”.
Note
You cannot select “2CH SWAP” when “2CH A. DIRECT” is
selected (qg on page 26).
x LFE h ig h cu t filt e r (LFE HIGH CUT > XXX Hz)
Initial setting : STD (120 Hz)
4 Adjust the LEVEL parameters so that the level of
the test tone from each speaker sounds the same
w hen you are in your main listening position.
Press LEVEL to adjust the balance and level of
speakers. For details on the LEVEL menu, see page 35.
While adjusting, the test tone is output from the
speaker whose adjustment is performed.
Lets you select the cut off frequency of the LFE channel
high cut filter. Normally, select “STD”. When using a
passive subwoofer powered by a separate power
amplifier, it may be better to change the cut off frequency.
When this is the case, use a setting other than STD.
Ad ju st in g t h e sp e a ke r le ve l
5 Press TEST TONE again to turn off the test tone.
Use the remote while seated in your listening position to
adjust the level of each speaker.
Tip
You can adjust the level of the all speakers at the same time. Turn
MASTER VOLUME on the main unit or press MASTER VOL +/–
on the remote.
Note
This receiver incorporates a new test tone with a frequency
centered at 800 Hz for easier speaker level adjustment.
Notes
1 Press ?/1 to turn on the receiver.
• The adjusted value are shown in the display during
adjustment.
2 Press TEST TONE on the remote.
• Although these adjustments can also be made via the front
panel using the LEVEL menu (when the test tone is output, the
receiver switches to the LEVEL menu automatically), we
recommend you to follow the procedure described above and
adjust the speaker levels from your listening position using the
remote.
“TEST TONE” appears in the display and you will
hear the test tone from each speaker in sequence.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Use Your Receiver
There is no sound no matter which component is
selected.
Checking the connections
After connecting all of your components to the receiver,
do the following to verify that the connections were made
correctly.
, Check that both the receiver and all components
are turned on.
, Check that the volume level on the display is not
set to VOLUME MIN by turning the MASTER
VOLUME.
1/u
MASTER VOLUME
, Press SPEAKERS button if SP. OFF appears on the
display.
MASTER VOLUME
+
MULTI CHANNEL DECODING
?
/ 1
, Check that all speaker cords are connected
correctly.
–
DISPLAY
DIMMER
SPEAKERS
PHONES
LEVEL
SURR
SET UP
NAME
MUTING
CINEMA STUDIO EX
B
DIGITAL CONCERT HALL 6.1 CH DECODING
PRESET
TUNING
EQ
–
+
–
TUNING
FM
+
A
C
A
B
FUNCTION
, Press MUTING if MUTING appears on the display.
, Check that the headphones are not connected to
the PHONES jack. No sound will come from the
speakers if the headphones are connected.
, Check that the receiver is not in “Demonstration
Mode” (see page 16).
INPUT MODE
MODE
SOUND FIELD
MODE
MULTI /2CH A. DIRECT
MEMORY SHIFT FM MODE
AM
EQUALIZER
A.F.D.
2CH
ENTER
FUNCTION
1 Press ?/1 to turn on the receiver.
There’s no sound from a specific component.
, Check that the component is connected correctly to
the audio input jacks for that component.
2 Turn on the component that you connected (e.g.,
CD player or tape deck).
, Check that the cord(s) used for the connection is
(are) fully inserted into the jacks on both the
receiver and the component.
3 Rotate FUNCTION to select the component
(program source) and start playing it.
No sound is heard from one of the front
speakers.
4 Rotate MASTER VOLUME to turn up the volume.
, Connect a pair of headphones to the PHONES jack
to verify that sound is output from the headphones
(see “wf SPEAKERS button” and “PHONES jack”
on page 27).
If you do not obtain normal sound output after
performing this procedure, look for the reason in the
following checklist and take the appropriate measures to
correct the problem.
If only one channel is output from the headphones,
the component may not be connected to the
receiver correctly. Check that all the cords are fully
inserted into the jacks on both the receiver and the
component.
If both channels are output from the headphones,
the front speaker may not be connected to the
receiver correctly. Check the connection of the front
speaker which is not outputting any sound.
If you encounter a problem that is not included above, see
“Troubleshooting” on page 52.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Parts
Descriptions
Location of
Parts and Basic
Operations
This chapter provides information
about the locations and functions of
the buttons and controls on the front
panel. It also explains basic
operations.
1 ?/1 switch
Press to turn the receiver on and off.
2 DISPLAY button
Press repeatedly to change the information on the
display window as follows:
v
Index name of the component or the preset station*
v
FUNCTION button indication or frequency**
v
Sound field applied to the program source
* Index name appears only when you have assigned one to the
component or preset station (see page 47). Index name does not
appear when only blank spaces have been entered, or it is the
same as the function button.
** Frequency appears only when the tuner is selected.
3 DIMMER button
Press DIMMER repeatedly to adjust the brightness of
the display (5 steps).
When set to the dimmest setting, the display and the
blue LED are turned off. However, when you press
any button, the display becomes the brightest setting
temporary.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Parts Description
1
8
2 3
4
5
6
MASTER VOLUME
MULTI CHANNEL DECODING
+
? / 1
–
DISPLAY
DIMMER
SPEAKERS
PHONES
LEVEL
SURR
SET UP
NAME
MUTING
CINEMA STUDIO EX
B
DIGITAL CONCERT HALL 6.1 CH DECODING
PRESET
TUNING
EQ
+
+
–
–
TUNING
FM
A
C
A
B
FUNCTION
INPUT MODE
MODE
MULTI /2CH A. DIRECT
SOUND FIELD
MODE
MEMORY SHIFT FM MODE
AM
EQUALIZER
A.F.D.
2CH
ENTER
7
qa0
9
6 Use the CINEMA STUDIO EX buttons to enjoy the
4
The following buttons operate the built-in tuner. For
details, see “Receiving Broadcasts” starting from page 42.
CINEMA STUDIO EX sound effects.
A/B/C buttons
PRESET TUNING +/– buttons
Press to activate the CINEMA STUDIO EX A, B or C
sound field (page 30).
Scan all preset stations.
TUNING +/- buttons
7 Use the SOUND FIELD buttons to enjoy surround
sound. For details, see “Enjoying Surround Sound”
starting from page 28.
Scan all the available radio stations.
MEMORY button
Press to memorize a preset station.
A.F.D. button / indicator
Press to set the receiver to automatically detect the
type of audio signal being input and perform proper
decoding (if necessary).
SHIFT button
Selects a memory page for preset stations.
FM MODE button
MODE button / indicator
Press to activate the sound field selection mode (page
29).
If “STEREO” flashes in the display and the FM stereo
reception is poor, press this button. You will not have
the stereo effect but the sound is improved.
2CH button / indicator
FM button
Press to output sound from only the front (left and
right) speakers.
Selects the FM band.
AM button
8 MASTER VOLUME control
Selects the AM band.
After turning on the component you selected, rotate to
adjust the volume.
5 MULTI CHANNEL DECODING indicator
This indicator lights up when the unit is decoding
signals recorded in a multi channel format.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
9 FUNCTION control
q; INPUT MODE button
Rotate to select the component you want to use.
Press INPUT MODE to select the input mode for your
digital components. Each time you press the button,
the input mode of the currently selected component
switches.
To select
Rotate to display
VIDEO 1 or VIDEO 2
DVD/LD
VCR
DVD or LD player
TV or satellite tuner
MD or Tape deck
CD or SACD player
Built in tuner
Turntable
Select
To
TV/SAT
AUTO 2CH
Give priority to the analog audio
signals input to the AUDIO IN
(L/R) jacks when there is no
digital signals.
MD/TAPE
CD/SACD
TUNER
COAXIAL FIXED
OPTICAL FIXED
Specify the digital audio signals
input to the DIGITAL COAXIAL
input jacks.
PHONO
Specify the digital audio signals
input to the DIGITAL OPTICAL
input jacks.
After selecting the component, turn on the component
you selected and play the program source.
ANALOG 2CH FIXED
Specify the analog audio signals
input to the AUDIO IN (L/R)
jacks.
• After selecting VCR, DVD player, or LD player, turn on the
TV and set the TV’s video input to match the component
you selected.
When the MULTI CH is assigned to a specific function
using SET UP menu (page 49), “AUTO MULTI CH”
and “MULTI CH FIXED” are displayed instead of
“AUTO 2CH” and “ANALOG 2CH FIXED”.
MODE button
Press to select and play another video/audio source in
combination with the selected component.
Each time you press the button, the display changes as
follows:
Select
To
AUTO MULTI CH
Give priority to the analog audio
signals input to the MULTI CH
IN jacks when there is no digital
signals.
Standard display
t V:XXX t A:XXX
selected component T
MULTI CH FIXED
Specify the analog audio signals
input to the MULTI CH IN jacks.
Press MODE to display
And rotate FUNCTION to select
qa MUTING button
V:XXX
Any video source to enjoy with
the audio from the selected
component
Press to mute the sound. MUTING appears in the
display when the sound is muted.
A:XXX
Any audio source to enjoy with
the video from the selected
component
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Fro n t Pa n e l Pa rt s De scrip t io n
MASTER VOLUME
+
MULTI CHANNEL DECODING
? / 1
–
DISPLAY
DIMMER
SPEAKERS
PHONES
LEVEL
SURR
SET UP
NAME
MUTING
CINEMA STUDIO EX
B
DIGITAL CONCERT HALL 6.1 CH DECODING
PRESET
TUNING
EQ
+
+
–
–
TUNING
FM
A
C
A
B
FUNCTION
INPUT MODE
MODE
MULTI /2CH A. DIRECT
SOUND FIELD
MODE
MEMORY SHIFT FM MODE
AM
EQUALIZER
A.F.D.
2CH
ENTER
w;
ql qk
qd
qs
qf
qj
qh
qg
wf
wd ws wa
qs 6.1 CH DECODING button
qd EQUALIZER button
Press 6.1 CH DECODING to adjust the 6.1 channel
matrix parameter in the SET UP menu (page 49).
This function works only for the multi channel format
[3/2].
This function is effective for the following sound
fields.
Press to turn the equalizer on or off. The EQ indicator
in the display lights when the equalizer is turned on.
When you adjust the equalizer using the EQ
parameters (page 36), the settings are stored
automatically and can be reproduced wherever you
turn on the equalizer.
• A.F.D.*
• The equalizer is not compatible with 96 kHz digital audio
signals and during MULTI CH IN input or 2CH ANALOG
DIRECT.
• NORMAL SURROUND
• CINEMA STUDIO EX A-C
• SEMI CINEMA STUDIO EX A-C
• NIGHT THEATER
qf DIGITAL CONCERT HALL buttons
Use the DIGITAL CONCERT HALL buttons to enjoy
the DIGITAL CONCERT HALL sound effects.
• MONO MOVIE
• STEREO MOVIE
• V. MULTI DIMENSION
• VIRTUAL MULTI REAR
• V. SEMI M. DIMENSION
• VIRTUAL ENHANCED A, B
* “AUTO” only.
A/B buttons
Press to activate the DIGITAL CONCERT HALL A or
B sound field (page 30).
qg MULTI/2CH A. DIRECT button
Press MULTI/2CH A. DIRECT to enjoy the audio
source connected to the MULTI CH IN jacks or analog
2 channel input jacks. Only volume control and the
front speaker balance can be adjusted when set to 2CH
ANALOG DIRECT. When set to MULTI DIRECT, you
can adjust balance and level of all the speakers. When
this function is on, the surround effects are turned off.
About the “VIRTUAL MATRIX 6.1” playback
Though this receiver incorporates the 5.1 channel amplifier,
you can reproduce the 6.1 channel surround sound of the
sources encoded in 6.1 channel (page 29).
To enjoy “VIRTUAL MATRIX 6.1” playback most effectively,
use the 6.1CH DECODING function when you select
“CINEMA STUDIO EX A-C” or “SEMI CINEMA STUDIO EX
A-C”. The sound characteristics of CINEMA STUDIO and the
3D sound imaging create the virtual surround back speaker,
and you can enjoy the surround effect as if in the real theater.
You can select AUTO/ON/OFF using the 6.1CH DECODING
button (page 49).
Select
To
MULTI
Enjoy the audio source connected
to the MULTI CH IN jacks.
MULTI CH IN indicator lights up
in the display. This mode is
suitable for enjoying high quality
analog source.
2CH A. DIRECT
Enjoy the audio source connected
to analog 2 channel jacks. This
mode is suitable for enjoying
high quality analog source.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
qh SET UP button
Press to activate the setup mode, then use the cursor
buttons (w;) to select any of the following indications.
You can then make various settings using the jog dial
(ql). For details, see “Adjustment Using the SET UP
Button” starting from page 49.
qj NAME button
Press to activate the name function and enter names
for preset stations and program sources (page 47).
qk ENTER button
Press to enter individual characters for the preset
station and program source names.
ql Jog dial
Turn to adjust the selected speaker level, surround,
and equalizer parameters (etc.).
w; Cursor buttons (
/
)
Press to select various speaker level, surround, and
equalizer parameters (etc.).
wa EQ button
Press to activate the equalizer parameters (page 36).
The indicator on the button lights up and you can
adjust the various equalizer parameters.
ws SURR button
Press to activate the surround parameters (page 34).
The indicator on the button lights up and you can
adjust the various surround parameters (effect level,
wall type, etc.).
wd LEVEL button
Press to activate the speaker level parameters (page
35). The indicator on the button lights up and you can
adjust the various speaker level parameters (front
balance, surround balance, etc.).
wf SPEAKERS button
Press SPEAKERS button to ON. Press again to OFF.
PHONES jack
Connects headphones.
• When you connect the headphones, no sound will come
from the speakers and “SP. OFF” lights up in the display.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
You can take advantage of surround sound simply by
selecting one of the receiver’s pre-programmed sound
modes. They bring the exciting and powerful sound of
movie theaters and concert halls into your home. You can
also customize the sound modes to obtain the sound you
desire by changing the various surround parameters.
The receiver contains a variety of different sound modes.
The cinema sound modes are designed for use when
playing back movie software (DVD, LD, etc.) encoded
with multi channel surround sound or Dolby Pro Logic.
In addition to decoding the surround sound, some of
these modes also provide sound effects commonly found
in movie theaters.
Enjoying
Surround
Sound
This chapter describes how to set up
the receiver to enjoy surround sound.
You can enjoy multi channel surround
when playing back software encoded
with Dolby Digital or DTS.
The virtual sound modes contain compelling applications
of the Sony Digital Cinema Sound digital signal
processing technology. They shift the sound away from
the actual speaker locations to simulate the presence of
several “virtual” speakers.
The music (etc.) sound modes are designed for use with
standard audio sources and TV broadcasts. They add
reverberation to the source signal to make you feel as if
you were in a concert hall or stadium (etc.). Use these
sound modes with two-channel sources like CD and
stereo broadcasts of sports programs or musical concerts.
For more information about the sound modes, see pages
30 – 31.
A.F.D.
The “Auto Format Decoding” sound mode presents the
sound exactly as it was encoded, without adding any
reverberation (etc.).
DCS (Digital Cinema Sound)
The sound fields with DCS marks use DCS technology.
When these sound fields are selected, “Digital Cinema
Sound” indicator in the display lights up.
DCS is the concept name of the surround technology for
home theater developed by Sony. DCS uses the DSP
(Digital Signal Processor) technology to reproduce the
sound characteristics of an actual cinema cutting studio in
Hollywood.
To fully enjoy surround sound, you must register the
number and location of you speakers. See “Multi Channel
Surround setup” starting on page 17 to set the speaker
parameters before enjoying surround sound.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
EQ
LEVEL
CINEMA
STUDIO EX
DIGITAL
CONCERT
HALL
Selecting a Sound Field
SURR
MASTER VOLUME
+
MULTI CHANNEL DECODING
?
/ 1
You can enjoy surround sound simply by selecting one of
the pre-programmed sound fields according to the
program you want to listen to.
–
DISPLAY
DIMMER
SPEAKERS
PHONES
LEVEL
SURR
SET UP
MUTING
CINEMA STUDIO EX
B
DIGITAL CONCERT HALL 6.1 CH DECODING
PRESET
TUNING
EQ
NAME
–
+
–
TUNING
FM
+
A
C
A
B
FUNCTION
INPUT MODE
SOUND FIELD
MODE
MULTI /2CH A. DIRECT
MEMORY SHIFT FM MODE
AM
EQUALIZER
A.F.D.
2CH
MODE
ENTER
1 Press SOUND FIELD MODE.
The current sound field is indicated in the display.
Cursor buttons
Jog dial
EQUALIZER
2 Turn the jog dial or press the cursor buttons
SOUND FIELD
buttons
(
or ) to select the sound field you want.
See pages 30 – 31 for information on each sound field.
MULTI/2CH A. DIRECT
To turn the sound field off
Press A.F.D., 2CH or MULTI/2CH A. DIRECT (page 31).
Brief descriptions of buttons used to
enjoy surround sound
Tip
LEVEL button: Press to customize the level parameters.
When sound signals with a sampling frequency of 96 kHz are
input, the sound signals are output in stereo automatically, and
the sound field is turned off.
SURR button: Press to customize the surround
parameters in the current sound field.
z
You can identify Dolby Surround-encoded software by
looking at the packaging
EQ button: Press to customize the equalizer parameters
Dolby Digital discs are labeled with the
Surround encoded programs are labeled with the A
logo, and Dolby
in the current sound field.
logo.
Cursor buttons (
/
): Use to select parameters after
pressing the LEVEL, SURR, EQ or SET UP buttons.
z
6.1 channel matrix decoding
Some movies released after the summer of 1999 added a new
channel to its preexisting 5.1 channel. The new channel added
speakers behind the listening position. In the movie theaters,
these speakers are placed on the rear wall, on each side of the
projection room’s window.
Jog dial: Use to adjust parameters and select sound fields
(etc.).
SOUND FIELD buttons:
The 6.1 channel system used in the movie theaters is called Dolby
Surround EX system. However, to record on movie films, this 6.1
channel is converted to 5.1 channel using matrix encoding, and
the same number of channels are used as Dolby Digital and DTS
recordings. Recordings on the DVD also use the same signals.
A lot of movie theaters screen movie with matrix encoded
5.1 channel signals and this is not unnatural to the ears. However,
when a matrix decoder is used to create surround center speaker
signals, this simulates the same 6.1 channel sound as Dolby
Surround EX system in the movie theaters.
This unit is equipped with the matrix decoder allowing for 6.1
channel sound production. With Virtual 3D technology, the
surround back signals can be enjoyed even without an actual
surround back speaker. When the center speaker is not used, it is
possible to use this channel to output surround back signals.
Particularly with 6.1 CH DECODING, speakers placed on rear
and side walls in the movie theaters are virtually created. As
reflections and reverberations are also simulated, you can enjoy
powerful sounds as if in the movie theater that uses Dolby
Surround EX system.
A.F.D. button: Press to set the receiver to
automatically detect the type of audio signal being
input and perform proper decoding (if necessary).
MODE button: Press to activate the sound field
selection mode.
2CH button: Press to output sound from only the
front (left and right) speakers.
EQUALIZER button: Turns the equalizer effect on or off.
CINEMA STUDIO EX buttons: Press to select CINEMA
STUDIO EX A~C sound field.
MULTI/2CH A. DIRECT button: Press to input the analog
signal without digital processing. When this function is
on, the equalizer and sound field (etc.) are turned off.
DIGITAL CONCERT HALL buttons: Press to select
DIGITAL CONCERT HALL A~B sound field.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Se le ct in g a So u n d Fie ld
So u n d fie ld in fo rm a t io n
x STEREO MOVIE
Creates a theater like environment from movies recorded
with stereo soundtracks.
x NORMAL SURROUND
Software with multi channel surround audio signals is
played back according to the way it was recorded.
Software with 2 channel audio signals is decoded with
Dolby Pro Logic to create surround effects.
x V. MULTI DIMENSION1) (Virt u a l Mu lt i
DCS
Dim e n sio n )
Uses 3D sound imaging to create an array of virtual
surround speakers positioned higher than the listener
from a single pair of actual surround speakers. This mode
creates 5 sets of virtual speakers surrounding the listener
at approximately a 30° angle of elevation.
x CINEMA STUDIO EX A–C1)2)
DCS
Uses 3D sound imaging of V. MULTI DIMENSION to
create 5 sets of virtual speakers surrounding the listener
from a single pair of actual surround speakers.
You can reproduce the 6.1 channel surround sound by
creating the virtual surround back speaker through the
“VIRTUAL MATRIX 6.1” playback function (qs on page
26).
• CINEMA STUDIO EX A reproduces the sound
characteristics of Sony Pictures Entertainment’s classic
editing studio.
x VIRTUAL MULTI REAR1) (Virt u a l Mu lt i Re a r)
Uses 3D sound imaging to create 3 sets of virtual
surround speakers from 1 set of actual surround speakers.
DCS
x V. SEMI M. DIMENSION1) (Virt u a l Se m i Mu lt i
DCS
Dim e n sio n )
Uses 3D sound imaging to create virtual surround
speakers from the sound of the front speakers without
using actual surround speakers. This mode creates 5 sets
of virtual speakers surrounding the listener at a 30° angle
of elevation.
• CINEMA STUDIO EX B reproduces the sound
characteristics of Sony Pictures Entertainment’s mixing
studio which is one of the most up-to-date facilities in
Hollywood.
• CINEMA STUDIO EX C reproduces the sound
characteristics of Sony Pictures Entertainment’s BGM
recording studio.
x VIRTUAL ENHANCED A1) (Virt u a l En h a n ce d
DCS
Su rro u n d A)
Uses 3D sound imaging to create 3 sets of virtual
surround speakers from the sound of the front speakers
without using actual surround speakers.
x SEMI CINEMA STUDIO EX A–C1)
DCS
Uses 3D sound imaging of V. SEMI M. DIMENSION to
create 5 sets of virtual speakers surrounding the listener
from the sound of the front speakers (without using actual
surround speakers).
You can reproduce the 6.1 channel surround sound by
creating the virtual surround back speaker through the
“VIRTUAL MATRIX 6.1” playback function (qs on page
26).
• SEMI CINEMA STUDIO EX A reproduces the sound
characteristics of Sony Pictures Entertainment’s classic
editing studio.
• SEMI CINEMA STUDIO EX B reproduces the sound
characteristics of Sony Pictures Entertainment’s mixing
studio which is one of the most up-to-date facilities in
Hollywood.
x VIRTUAL ENHANCED B1) (Virt u a l En h a n ce d
DCS
Su rro u n d B)
Uses 3D sound imaging to create 1 set of virtual surround
speakers from the sound of the front speakers without
using actual surround speakers.
x DIGITAL CONCERT HALL A, B2)
Reproduces the acoustics of a concert hall using multi-
speaker system and 3D sound imaging for software with 2
channel signals like CDs.
• DIGITAL CONCERT HALL A reproduces the sonic
character of the CONCERTGEBOUW in Amsterdam,
which is famous for its large sound stage due to its
reflectivity.
• DIGITAL CONCERT HALL B reproduces the sonic
character of the MUSIKVEREIN in Vienna, which is
famous for its hall resonance and unique reverberative
sound.
• SEMI CINEMA STUDIO EX C reproduces the sound
characteristics of Sony Pictures Entertainment’s BGM
recording studio.
x NIGHT THEATER
Allows you to retain a theater like environment while
listening at low volume levels, such as late at night.
x CHURCH
Reproduces the acoustics of a stone church.
x MONO MOVIE
Creates a theater like environment from movies with
monaural soundtracks.
x OPERA HOUSE
Reproduces the acoustics of an opera house.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
x JAZZ CLUB
Reproduces the acoustics of a jazz club.
Use the buttons on the front panel to operate the
following modes.
x DISCO/CLUB
A.F.D. (Auto Format Decoding)
Reproduces the acoustics of a discotheque/dance club.
Automatically detects the type of audio signal being input
(Dolby Digital, DTS, Dolby Pro Logic, or standard 2
channel stereo) and performs the proper decoding if
necessary. This mode presents the sound as it was
recorded/encoded, without adding any effects (e.g.
reverberation.)
x LIVE HOUSE
Reproduces the acoustics of a 300-seat live house.
x ARENA
Reproduces the acoustics of a 1000-seat concert hall.
2CH (2 Channel)
x STADIUM
Reproduces the feeling of a large open-air stadium.
Outputs the sound from the front left and right speakers
only. Standard 2 channel (stereo) sources completely
bypass the sound field processing. Multi channel
surround formats are downmixed to 2 channel.
x GAME
Obtains maximun audio impact from video game
software.
MULTI/2CH A. DIRECT (Multi/2 CH Analog Direct)
The analog input signal is not digitally processed. You can
enjoy high quality analog source. Only volume control
and the front speaker balance can be adjusted when set to
2CH A. DIRECT. When set to MULTI DIRECT, you can
adjust balance and level of all the speakers. When this
function is on, the equalizer, sound field (etc.) are turned
off.
When headphones are connected, you can select the
following sound fields only:
x HEADPHONE (2CH)
Outputs the sound in 2 channel (stereo).
Standard 2 channel (stereo) sources completely bypass the
sound field processing. Multi channel surround formats
are downmixed to 2 channel.
Note
No sound is output from the sub woofer when the 2 CHANNEL
mode is selected. To listen to two channel (stereo) sources using
the front left and right speakers and a sub woofer, use the AUTO
FORMAT DECODING mode.
x HEADPHONE (DIRECT)
Outputs the analog signals without digital processing by
the equalizer, sound field, etc.
x HEADPHONE THEATER
Allows you to experience a theater like environment
while listening through a pair of headphones.
1) “VIRTUAL” sound field: Sound field with virtual speakers.
However, turning the SURROUND menu “VIR. SPEAKERS”
parameter off when using “CINEMASTUDIO EX A~C” or
“SEMI CINEMA STUDIO EX A~C” reproduces the sound
characteristics of each cinema production studio without
virtual speakers.
2) You can select by pressing the buttons on the front panel.
Notes
• The effects provided by the virtual speakers may cause
increased noise in the play back signal.
• When listening to sound fields that employ the virtual
speakers, you will not be able to hear any sound coming
directly from the surround speakers.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the Multi-Channel Surround Displays
1
2
3
4
5
6 7
8
9
OPTCOAXMULTI CH IN
L.F.E.
SW
L
C
R
DIGITAL
MEMORY
SLEEP
a
STEREO MONO
DTS MPEG
a
SL
SR
SSB
SP.OFF D.RANGE EQ PRO LOGIC
L.F.E.
1 OPT
7
Lights up when the source signal is a digital signal
being input through the OPTICAL terminal.
Lights up when the disc being played contains the LFE
(Low Frequency Effect) channel. When the sound of
the LFE channel signal is actually being reproduced,
the bars underneath the letters lights up to indicate the
level. Since the LFE signal is not recorded in all parts
of the input signal the bar indication will fluctuate
(and may turn off) during playback.
2 COAX
Lights up when the source signal is a digital signal
being input through the COAXIAL terminal.
3 MULTI CH IN
Lights up when MULTI CH IN is selected.
8 SW
Lights up when sub woofer selection is set to “YES”
4 MPEG
(page 19) and the audio signal is output from the
SUB WOOFER jack(s).
Lights up when MPEG signals are input.
Note
9 Playback channel indicators
Only the front 2 channels are compatible with MPEG
format. Multi channel surround sound is downmixed
and output from the front 2 channels.
The letters light up to indicate the channels being
played back. The boxes around the letters vary to
show how the receiver downmixes the source sound
(based on the speakers setting). When using sound
fields like “DIGITAL CONCERT HALL”, the receiver
adds reverberation based on the source sound.
5 ; DIGITAL
This indicator lights up when the receiver is decoding
signals recorded in the Dolby Digital format.
L: Front Left
R: Front Right
C: Center (monaural)
SR: Surround Right
SL: Surround Left
6 PRO LOGIC
Lights when the receiver applies Pro Logic processing
to two channel signals in order to output the center
and surround channel signals.*
* However, this indicator does not light if the center and surround
speakers are set to “NO”, or the SPEAKERS button is set to
OFF and the A.F.D. or NORMAL SURROUND sound fields
are selected.
S: Surround (monaural or the surround components
obtained by Pro Logic processing)
SB: Surround Back (the surround back components
obtained by 6.1 matrix decoding)
Example:
Recording format (Front/Surround): 3/2
Output channel: Surround speakers absent
Sound Field: A.F.D.
Note
Pro Logic decoding does not function for MPEG
format signals.
L
C
R
SL
SR
32
Download from Www.Somanuals.com. All Manuals Search And Download.
q;
OPTCOAXMULTI CH IN
L.F.E.
SW
L
C
R
DIGITAL
MEMORY
SLEEP
a
STEREO MONO
DTS MPEG
a
SL
SR
SSB
SP.OFF D.RANGE EQ PRO LOGIC
qs
qh qg qf qd
qa
q; Tuner indicators
These indicators light up when using the receiver to
tune in radio stations, etc. See pages 42 – 45 for tuner
operations.
qa SLEEP
Lights up when sleep timer is activated.
qs EQ
Lights when the equalizer functions.
qd D. RANGE
Lights up when dynamic range compression is active.
See page 35 to adjust the dynamic range compression.
qf DTS
Lights up when DTS signals are input.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT MODE
is NOT set to ANALOG (see q; on page 25).
qg SP. OFF
Lights up when headphone is inserted or the
SPEAKERS button is set to OFF.
qh ;
Lights up when Dolby Digital signals are input.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Sound Fields
By adjusting the surround parameters and the
equalization of the front, center, surround and surround
back speakers, you can customize the sound fields to suit
your particular listening situation.
Effect level (EFFECT)
Initial setting : (depends on sound mode)
Lets you adjust the “presence” of the current surround
effect.
Once you customize a sound field, the changes are stored
in the memory indefinitely. You can change a customized
sound field any time by making new adjustments to the
parameters.
Wall type (WALL S_I_H)
Initial setting : Midpoint
Lets you control the level of the high frequencies to alter
the sonic character of your listening environment by
simulating a softer (S) or harder (H) wall. The midpoint
designates a neutral wall (made of wood).
See the table on pages 37 – 41 for the parameters available
in each sound field.
Reverberation (REVERB S_I_L)
Initial setting : Midpoint
To get the most from multi channel
surround sound
Lets you control the spacing of the early reflections to
simulate a sonically longer (L) or shorter (S) room. The
midpoint designates a standard room with no adjustment.
Position your speakers and do the procedures described
in “Multi Channel Surround Setup” starting from page 17
before you customize a sound field.
Front reverberation (FRONT REVERB)
Initial setting : STD
This parameter can be used when “DIGITAL CONCERT
HALL A, B” is selected. This parameter lets you adjust the
amount of reverberations to add to the front signals
according to the original reverberations in the source.
• To increase front reverberations, select “WET”.
• To decrease front reverberations, select “DRY”.
Adjusting the surround parameters
The SURR menu contains parameters that let you
customize various aspects of the current sound field. The
settings available in this menu are stored individually for
each sound field.
Screen depth (SCEEN DEPTH)
Initial setting : MID
1 Start playing a program source encoded with multi
channel surround sound.
In a movie theater, sound seems to come from inside the
image reflected on the movie screen. This parameter
allows you to create the same sensation in your listening
room by shifting the sound of the front speakers “into”
the screen. “DEEP” provides the greatest amount of
screen depth.
2 Press SURR.
The button lights up and the first parameter is
displayed.
3 Press the cursor buttons ( or ) to select the
parameter you want to adjust.
Virtual speaker (VIR. SPEAKERS)
Initial setting : ON
Allows you turn the virtual speakers created by the
CINEMA STUDIO EX A, B, C and SEMI CINEMA
STUDIO EX A, B, C sound fields off or on.
4 Turn the jog dial to select the setting you want.
The setting is stored automatically.
Pro Logic (PRO LOGIC)
Initial setting : AUTO
Lets you specify the Pro Logic decoding setting.
• When set to “AUTO”, the receiver performs PRO
LOGIC decoding if Dolby surround encoded flag is ON
or if Pro Logic decoding produces a better sound field.
• When set to “ON”, the receiver performs PRO LOGIC
decoding on surround signals, regardless of the Dolby
surround encoded flag.
• When set to “OFF”, the receiver does not perform PRO
LOGIC decoding.
Note
Pro Logic decoding does not function for MPEG format signals.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Low Frequency Effect (LFE MIX XXX dB)
Initial setting : 0 dB
Adjusting the level parameters
The LEVEL menu contains parameters that let you adjust
the balance and speaker volumes of each speaker. The
settings available in this menu are applied to all sound
fields.
Lets you attenuate the level of the LFE (Low Frequency
Effect) channel output from the sub woofer without
affecting the level of the bass frequencies sent to the sub
woofer from the front, center or surround channels via the
Dolby Digital or DTS bass redirection circuitry.
• For LFE mix level, “0 dB” outputs the full LFE signal at
the mix level determined by the recording engineer.
• To mute the sound of the LFE channel from the sub
woofer, select “OFF”. However, the low frequency
sounds of the front, center, or surround speakers are
output from the sub woofer according to the settings
made for each speaker in the speaker setup (page 17-
19).
1 Start playing a program source encoded with multi
channel surround sound.
2 Press LEVEL.
The button lights up and the first parameter is
displayed.
3 Press the cursor buttons ( or ) to select the
parameter you want to adjust.
Dynamic range compressor (D. RANGE COMP.)
Initial setting : OFF
Lets you compress the dynamic range of the sound track.
This may be useful when you want to watch movies at
low volumes late at night. We recommend using the
“MAX” setting.
4 Turn the jog dial to select the setting you want.
The setting is stored automatically.
Front balance (FRONT L_I_R)
Initial setting : Center
• To reproduce the sound track with no compression,
select “OFF”.
Lets you adjust the balance between the front left and
right speakers.
• To reproduce the sound track with the dynamic range
intended by the recording engineer, select “STD”.
• To compress the dynamic range in small steps to
achieve the sound you desire, select “0.1”–”0.9”.
• To reproduce a dramatic compression of the dynamic
range, select “MAX”.
Surround balance (SURROUND L_I_R)
Initial setting : Center
Lets you adjust the balance between the surround left and
right speakers.
Center level (CENTER LEVEL XXX dB)
Initial setting : 0 dB
Lets you adjust the level of the center speaker.
Note
Dynamic range compression is possible with Dolby Digital
sources only.
Surround level (SURROUND LEVEL XXX dB)
Initial setting : 0 dB
Lets you adjust level of the surround (left and right)
speakers.
Surround back level (SURR BACK LEVEL XXX dB)
Initial setting : 0 dB
Lets you adjust the level of the surround back speaker.
Sub woofer level (S. WOOFER LEVEL XXX dB)
Initial setting : 0 dB
Lets you adjust the level of the sub woofer.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Sound Fields
Adjusting the equalizer
Center speaker treble adjustment (Level/
Frequency)
Lets you adjust the gain and frequency of treble.
The EQ menu lets you adjust the equalization of the front,
center, surround, and surround back speakers. The
settings are stored individually for each sound field.
Surround speaker bass adjustment (Level/
Frequency)
Lets you adjust the gain and frequency of bass.
1 Start playing a program source encoded with multi
channel surround sound.
Surround speaker treble adjustment (Level/
Frequency)
Lets you adjust the gain and frequency of treble.
2 Press EQ.
The button lights up and the first parameter is
displayed.
Surround back speaker bass adjustment (Level/
Frequency)
Lets you adjust the gain and frequency of bass.
3 Press the cursor buttons ( or ) to select the
parameter (gain (dB), bandwidth, frequency (Hz))
you want to adjust.
Surround back speaker treble adjustment (Level/
Frequency)
Lets you adjust the gain and frequency of treble.
4 Turn the jog dial to select the setting you want.
The setting is entered automatically.
Level (dB)
Resetting customized sound fields to the
factory settings
Frequency (Hz)
1 If the power is on, press ?/1 to turn off the power.
To turn on/ off the equalizer
2 Hold down SOUND FIELD MODE and press ?/1.
“S.F Initialize” appears in the display and all sound
fields are reset at once.
Press EQUALIZER. The EQ indicator in the display lights
up when the equalizer is turned on. When you adjust the
equalizer using the EQ parameters, the settings are stored
separately for each sound field and can be reproduced
whenever you turn on the equalizer.
Front speaker bass adjustment (Level/ Frequency)
Lets you adjust the gain and frequency of bass.
Front speaker midrange adjustment (Level/
Frequency)
Lets you adjust the gain and frequency of midrange.
Front speaker treble adjustment (Level/
Frequency)
Lets you adjust the gain and frequency of treble.
Center speaker bass adjustment (Level/
Frequency)
Lets you adjust the gain and frequency of bass.
Center speaker midrange adjustment (Level/
Frequency)
Lets you adjust the gain and frequency of midrange.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustable parameters for each sound field
The adjusted SURR and EQ parameters are stored in each sound field. The adjusted LEVEL parameters are applied to all
the sound fields.
<
SURR
REVERB
TIME
>
PRO
LOGIC
EFFECT
LEVEL
WALL
TYPE
FRONT
REVERB
SCREEN
DEPTH
VIRTUAL
SPEAKERS
2CH
A.F.D.
AUTO
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
NORMAL SURROUND
CINEMA STUDIO EX A
CINEMA STUDIO EX B
CINEMA STUDIO EX C
SEMI CINEMA STUDIO EX A
SEMI CINEMA STUDIO EX B
SEMI CINEMA STUDIO EX C
NIGHT THEATER
MONO MOVIE
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
STEREO MOVIE
V. MULTI DIMENSION
VIRTUAL MULTI REAR
V. SEMI M. DIMENSION
VIRTUAL ENHANCED A
VIRTUAL ENHANCED B
DIGITAL CONCERT HALL A
DIGITAL CONCERT HALL B
CHURCH
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
OPERA HOUSE
JAZZ CLUB
DISCO/CLUB
LIVE HOUSE
ARENA
STADIUM
GAME
HEADPHONE (2CH)
HEADPHONE (DIRECT)
HEADPHONE THEATER
MULTI CH IN
z
z
2CH ANALOG DIRECT
PCM96K
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Sound Fields
Adjustable parameters for each sound field (continued)
<
LEVEL
>
FRONT
BAL
SURR
BAL
CENTER
LEVEL
SURR
LEVEL
SURR BACK SUB WOOFER
LFE
D. RANGE
COMP.1)
LEVEL
LEVEL
MIX1)
2CH
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
A.F.D.
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
NORMAL SURROUND
CINEMA STUDIO EX A
CINEMA STUDIO EX B
CINEMA STUDIO EX C
SEMI CINEMA STUDIO EX A
SEMI CINEMA STUDIO EX B
SEMI CINEMA STUDIO EX C
NIGHT THEATER
MONO MOVIE
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
STEREO MOVIE
z
V. MULTI DIMENSION
VIRTUAL MULTI REAR
V. SEMI M. DIMENSION
VIRTUAL ENHANCED A
VIRTUAL ENHANCED B
DIGITAL CONCERT HALL A
DIGITAL CONCERT HALL B
CHURCH
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z2)
z2)
z2)
z2)
z2)
z
OPERA HOUSE
JAZZ CLUB
DISCO/CLUB
LIVE HOUSE
z2)
z2)
z2)
z
ARENA
STADIUM
GAME
HEADPHONE (2CH)
HEADPHONE (DIRECT)
HEADPHONE THEATER
MULTI CH IN
z
z
z
z
z
2CH ANALOG DIRECT
PCM96K
1) These parameters may not operate depending on the source or adjustments. For details, see each item in “Adjusting the level
parameters” (page 35).
2) When these sound fields are selected, there is no sound output from the SUB WOOFER terminal if your front speaker size is set to
“LARGE”. However, sound will be output from the sub woofer if the digital input signal contains L.F.E. signals.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustable parameters for each sound field (continued)
<
EQ
>
<
BASS
GAIN
FRONT
MID
>
TREBLE
FREQ
BASS
FREQ
MID
FREQ
TREBLE
GAIN
GAIN
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
2CH
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
A.F.D.
NORMAL SURROUND
CINEMA STUDIO EX A
CINEMA STUDIO EX B
CINEMA STUDIO EX C
SEMI CINEMA STUDIO EX A
SEMI CINEMA STUDIO EX B
SEMI CINEMA STUDIO EX C
NIGHT THEATER
MONO MOVIE
STEREO MOVIE
V. MULTI DIMENSION
VIRTUAL MULTI REAR
V. SEMI M. DIMENSION
VIRTUAL ENHANCED A
VIRTUAL ENHANCED B
DIGITAL CONCERT HALL A
DIGITAL CONCERT HALL B
CHURCH
OPERA HOUSE
JAZZ CLUB
DISCO/CLUB
LIVE HOUSE
ARENA
STADIUM
GAME
HEADPHONE (2CH)
HEADPHONE (DIRECT)
HEADPHONE THEATER
MULTI CH IN
z
z
z
z
z
z
2CH ANALOG DIRECT
PCM96K
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Sound Fields
Adjustable parameters for each sound field (continued)
<
EQ
>
<
BASS
GAIN
CENTER
MID
GAIN
>
TREBLE
FREQ
BASS
FREQ
MID
FREQ
TREBLE
GAIN
2CH
A.F.D.
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
NORMAL SURROUND
CINEMA STUDIO EX A
CINEMA STUDIO EX B
CINEMA STUDIO EX C
SEMI CINEMA STUDIO EX A
SEMI CINEMA STUDIO EX B
SEMI CINEMA STUDIO EX C
NIGHT THEATER
MONO MOVIE
STEREO MOVIE
V. MULTI DIMENSION
VIRTUAL MULTI REAR
V. SEMI M. DIMENSION
VIRTUAL ENHANCED A
VIRTUAL ENHANCED B
DIGITAL CONCERT HALL A
DIGITAL CONCERT HALL B
CHURCH
OPERA HOUSE
JAZZ CLUB
DISCO/CLUB
LIVE HOUSE
ARENA
STADIUM
GAME
HEADPHONE (2CH)
HEADPHONE (DIRECT)
HEADPHONE THEATER
MULTI CH IN
2CH ANALOG DIRECT
PCM96K
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustable parameters for each sound field (continued)
<
EQ
>
<
BASS
GAIN
SURROUND/SURROUND BACK
>
TREBLE
FREQ
BASS
FREQ
TREBLE
GAIN
2CH
A.F.D.
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
NORMAL SURROUND
CINEMA STUDIO EX A
CINEMA STUDIO EX B
CINEMA STUDIO EX C
SEMI CINEMA STUDIO EX A
SEMI CINEMA STUDIO EX B
SEMI CINEMA STUDIO EX C
NIGHT THEATER
MONO MOVIE
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
STEREO MOVIE
V. MULTI DIMENSION
VIRTUAL MULTI REAR
V. SEMI M. DIMENSION
VIRTUAL ENHANCED A
VIRTUAL ENHANCED B
DIGITAL CONCERT HALL A
DIGITAL CONCERT HALL B
CHURCH
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
OPERA HOUSE
JAZZ CLUB
DISCO/CLUB
LIVE HOUSE
ARENA
STADIUM
GAME
HEADPHONE (2CH)
HEADPHONE (DIRECT)
HEADPHONE THEATER
MULTI CH IN
2CH ANALOG DIRECT
PCM96K
41
Download from Www.Somanuals.com. All Manuals Search And Download.
You can tune in stations on this receiver in the following
ways:
Receiving
Broadcasts
Direct Tuning
You can enter a frequency of the station you want directly
by using the numeric buttons on the supplied remote (see
page 44).
Automatic Tuning
This chapter describes how to receive
FM or AM broadcasts and how to
preset selected stations.
If you don’t know the frequency of the station you want,
you can let the receiver scan all available stations in your
area (see page 44).
Preset Tuning
After you have tuned in stations using Direct Tuning or
Automatic Tuning, you can preset them to the receiver
(see page 45). Then you can tune in any of the stations
directly by entering its 2-character code (see page 45). Up
to 30 FM or AM stations can be preset. The receiver will
also scan all the stations that you have preset (see page
45).
Before you begin, make sure you have:
• Connected FM and AM antennas to the receiver (see
page 5).
42
Download from Www.Somanuals.com. All Manuals Search And Download.
PRESET TUNING +/–
TUNING +/–
Brief descriptions of buttons used to
receive broadcasts
MEMORY
PRESET TUNING +/– buttons: Press to scan all preset
MASTER VOLUME
+
MULTI CHANNEL DECODING
?
/ 1
radio stations.
–
DISPLAY
DIMMER
SPEAKERS
PHONES
LEVEL
SURR
SET UP
NAME
MUTING
TUNING +/– buttons: Press to scan all available radio
stations.
CINEMA STUDIO EX
B
DIGITAL CONCERT HALL 6.1 CH DECODING
PRESET
TUNING
EQ
–
+
–
TUNING
FM
+
A
C
A
B
FUNCTION
INPUT MODE
MODE
SOUND FIELD
MODE
MULTI /2CH A. DIRECT
MEMORY SHIFT FM MODE
AM
EQUALIZER
A.F.D.
2CH
ENTER
FM MODE button: If “STEREO” flashes in the display
and the FM stereo reception is poor, press this button to
improve the sound. You will not be able to enjoy stereo
effect but the sound will be less distorted.
AM
FM
FM MODE
FUNCTION
SHIFT
Note
AV
? / 1
? / 1
If “STEREO” does not appear at all even when the FM broadcast
is received normally, press this button to turn on the “STEREO”
indication.
SLEEP
USE MODE
SYSTEM
STANDBY
VIDEO 1 VIDEO 2 VIDEO 3 DVD/LD
TV/SAT
PHONO
AUX
MD/TAPE CD/SACD TUNER
FM: Press to select the FM band.
AV1
AV2
3RD
2ND ROOM
MONITOR
1
2
3
AM: Press to select the AM band.
Numeric buttons
(SOURCE)
TV/VIDEO
INPUT MODE
4
7
5
8
0
6
9
SEARCH
MODE
AUDIO
SPLIT
MEMORY button: Uses for memorizing preset stations.
WIDE
ANT
TV/VTR
DISC
CLEAR
– –
SHIFT
>10
ENTER
SHIFT button: Press to select a memory page (A, B, or C)
D.TUNING
D.TUNING
/11
/10
/12
JUMP
for presetting radio stations or tuning to preset stations.
– SUB CH +
POSITION SWAP
m
M
.
>
D. SKIP/
CH/PRESET
MUTING
P IN P
–
VOL
+
FUNCTION control: Rotate to select the tuner or other
X
x
n
N
SOUND FIELD 2CH
source.
A.F.D.
MODE
PRESET
AV
DISPLAY
TEST
TONE
NIGHT
MODE
MULTI/2CH
A. DIRECT
EQ/TONE
On the remote:
D. TUNING: Press this button to enter a frequency directly
using the numeric buttons.
TITLE
GUIDE
AV
MENU
ON
MUTING
SCREEN
MASTER
VOL
MAIN
MENU
ENTER/
EXEC
EXIT/
RETURN
Numeric buttons: Press to enter a numeric value when
inputting the frequency directly, presetting radio stations,
or tuning to preset stations.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Tuning
Automatic Tuning
For details on the buttons used in this section, see “Brief
descriptions of buttons used to receive broadcasts” on
page 43.
For details on the buttons used in this section, see “Brief
descriptions of buttons used to receive broadcasts” on
page 43.
1 Rotate FUNCTION to select the tuner.
1 Rotate FUNCTION to select the tuner.
The last received station is tuned in.
The last received station is tuned in.
2 Press FM or AM to select the FM or AM band.
2 Press FM or AM to select the FM or AM band.
3 Press D.TUNING on the remote.
3 Press TUNING + or TUNING –.
Press the + button to scan from low to high; press the –
button to scan from high to low.
4 Press the numeric buttons on the remote to enter
the frequency.
The receiver stops scanning whenever a station is
received.
Example 1: FM 102.50 MHz
1
0
2
5
When the receiver reaches either end of the
band
Scanning is repeated in the same direction.
0
b
b
b
b
Example 2: AM 1350 kHz
(You don’t have to enter the last “0” when the tuning interval
is set to 10 kHz)
4 To continue scanning, press TUNING + or TUNING –
1
3
5
0
b
b
b
again.
If you cannot tune in a station and the
entered numbers flash
Make sure you’ve entered the right frequency. If not,
repeat Steps 3 and 4.
If the entered numbers still flash, the frequency is not
used in your area.
5 If you’ve tuned in an AM station, adjust the
direction of the AM loop antenna for optimum
reception.
6 Repeat Steps 2 to 5 to receive another station.
z
If you try to enter a frequency not covered by the tuning
interval
The entered value is automatically rounded up or down.
The tuning scale for direct tuning differs depending on the area
code as shown in the following table. For details on area codes,
see page 3.
Area code
FM tuning scale
AM tuning scale
E2, E3
50kHz
9kHz (can be
changed to 10kHz)*
AU, CN, SP
50kHz
9kHz
* To change the AM tuning scale, see page 55.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Tuning
For details on the buttons used in this section, see “Brief
descriptions of buttons used to receive broadcasts” on
page 43.
Tuning to preset stations
You can tune the preset stations either of the following
two ways.
Before tuning to preset stations, be sure to preset them by
performing steps on “Presetting radio stations” below.
Scanning the preset stations
1 Rotate FUNCTION to select the tuner.
The last received station is tuned in.
Presetting radio stations
2 Press PRESET TUNING + or PRESET TUNING –
repeatedly to select the preset station you want.
Each time you press the button, the receiver tunes in
one preset station at a time, in the corresponding order
and direction as follows:
1 Rotate FUNCTION to select the tuner.
The last received station is tuned in.
2 Tune in the station that you want to preset using
Direct Tuning or Automatic Tuning (page 44).
nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N
3 Press MEMORY.
“MEMORY” appears in the display for a few seconds.
Do Steps 4 to 6 before “MEMORY” goes out.
nC0˜...C2˜C1N
Using the preset codes
4 Press SHIFT to select a memory page (A, B or C).
Each time you press SHIFT, the letter “A,” “B” or “C”
appears in the display.
1 Rotate FUNCTION to select the tuner.
The last received station is tuned in.
5 Press PRESET TUNING + or PRESET TUNING – to
select a preset number.
2 Press SHIFT to select a memory page (A, B, or C),
then press the preset number of the station you
want using the numeric buttons on the supplied
remote.
If “MEMORY” goes out before you press the preset
number, start again from Step 3.
6 Press MEMORY again to store the station.
If “MEMORY” goes out before you can store the
station, start again from Step 3.
7 Repeat Steps 2 to 6 to preset another station.
To change a preset number to another station
Do Steps 1 to 6 to preset the new station to the number.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Cursor buttons
NAME
Other
Operations
SET UP
MASTER VOLUME
+
MULTI CHANNEL DECODING
?
/ 1
–
DISPLAY
DIMMER
SPEAKERS
PHONES
LEVEL
SURR
SET UP
NAME
MUTING
CINEMA STUDIO EX
B
DIGITAL CONCERT HALL 6.1 CH DECODING
PRESET
TUNING
EQ
–
+
–
TUNING
FM
+
A
C
A
B
FUNCTION
INPUT MODE
MODE
SOUND FIELD
MODE
MULTI /2CH A. DIRECT
MEMORY SHIFT FM MODE
AM
EQUALIZER
A.F.D.
2CH
ENTER
Jog dial
ENTER
FUNCTION
Brief descriptions of buttons that appear
in this chapter
NAME button: Press to name preset stations or program
sources.
Jog dial: Use to select characters when naming preset
stations or program sources.
Cursor buttons (
/
): Use to move the cursor when
naming preset stations or program sources.
FUNCTION control: Rotate to select the tuner or other
source.
SET UP button: Press to enter the set up mode.
ENTER button: Press to enter the completed name of the
preset station or program source.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Naming Preset Stations and
Program Sources
Recording
Your receiver makes it easy to record to and from the
components connected to it. You don’t have to connect
the playback and recording components directly to each
other: once you select a program source on the receiver,
you can record and edit as you normally would using the
controls on each component.
You can enter a name (index name) of up to 8 characters
for preset stations and program sources. These names (for
example, “VHS”) appear in the receiver’s display when a
station or program source is selected.
Note that no more than one name can be entered for each
preset station or program source.
This function is useful for distinguishing components of
the same kind. For example, two VCRs can be specified
as “VHS” and “8mm,” respectively. It is also handy for
identifying components connected to jacks meant for
another type of component, for example, a second CD
player connected to the MD/TAPE jacks.
Before you begin, make sure you’ve connected all
components properly.
FUNCTION
MASTER VOLUME
MULTI CHANNEL DECODING
+
?
/ 1
–
DISPLAY
DIMMER
SPEAKERS
PHONES
LEVEL
SURR
SET UP
NAME
MUTING
CINEMA STUDIO EX
B
DIGITAL CONCERT HALL 6.1 CH DECODING
1 To name a preset station
PRESET
TUNING
EQ
–
+
–
TUNING
FM
+
A
C
A
B
FUNCTION
INPUT MODE
MODE
SOUND FIELD
MODE
MULTI /2CH A. DIRECT
MEMORY SHIFT FM MODE
AM
EQUALIZER
Rotate FUNCTION to select the tuner.
The last station you received is tuned in.
A.F.D.
2CH
ENTER
To name a program source
Select the program source (component) to be
named, then go to Step 3.
Recording component
(tape deck, MD deck,
VCR)
Playback component
(program source)
2 Tune in the preset station you want to create an
index name for.
ç: Audio signal flow
c: Video signal flow
If you are not familiar with how to tune in preset
stations, see “Tuning to preset stations” on page 45.
3 Press NAME.
Recording on an audio tape or MiniDisc
You can record on a cassette tape or MiniDisc using the
receiver. See the instruction manual of your cassette deck
or MD deck if you need help.
4 Create an index name by using the jog dial and
cursor buttons:
Turn the jog dial to select a character, then press
move the cursor to the next position.
to
1 Select the component to be recorded.
To insert a space
Turn the jog dial until a blank space appears in the
display.
2 Prepare the component for playing.
For example, insert a CD into the CD player.
3 Insert a blank tape or MD into the recording deck
If you’ve made a mistake
and adjust the recording level, if necessary.
Press
or
repeatedly until the character to be
changed flashes, then turn the jog dial to select the
right character.
4 Start recording on the recording deck, then start
playback on the playback component.
5 Press ENTER.
To assign index names to other stations
Repeat Steps 2 to 5.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Using the Sleep Timer
You can set the receiver to turn off automatically at a
specified time.
Recording on a video tape
You can record from a VCR, a TV, or an LD player using
the receiver. You can also add audio from a variety of
audio sources when editing a video tape. See your VCR
or LD player’s instruction manual if you need help.
Press SLEEP on the remote while the power is on.
Each time you press SLEEP, the time changes as shown
below.
n 2:00:00 n 1:30:00n 1:00:00 n 0:30:00 n OFF
1 Select the program source to be recorded.
2 Prepare the component for playing.
For example, insert the laser disc you want to record
into the LD player.
The display dims after you have specified the time. While
using Sleep Timer, “SLEEP” lights up in the display.
Tips
3 Insert a blank video tape into the VCR (VIDEO 1 or
• You can freely specify the time. After pressing SLEEP, specify
the time you want using the jog dial and cursor buttons
VIDEO 2) for recording.
(
or ) on the receiver. The sleep time changes in 1 second
4 Start recording on the recording VCR, then start
playing the video tape or laser disc you want to
record.
intervals. You can specify up to 5 hours.
• To check the remaining time before the receiver turns off, press
SLEEP. The remaining time appears in the display.
z
You can record the sound from any audio source onto a
video tape while recording from a video tape or laser disc
Locate the point where you want to start recording from another
audio source, select the program source, then start playback. The
audio from that source will be recorded onto the audio track of
the video tape instead of the audio from the original medium.
To resume audio recording from the original medium, select the
video source again.
Notes
• Please be sure to make both digital and analog connections to
the TV/SAT and DVD/LD inputs. Analog recording is not
possible if you only make digital connections.
• Some sources contain copy guards to prevent recording. In this
case, you may not be able to record from the sources.
• You cannot record a digital audio signal using a component
connected to the analog MD/TAPE OUT jacks. To record a
digital audio signal, connect a digital component to the
DIGITAL MD/TAPE OUT jacks.
• Sound adjustments do not affect the signal output from the
MD/TAPE OUT jacks.
• When MULTI/2CH A. DIRECT is set to MULTI DIRECT, audio
signals are not output from REC OUT jacks.
• No signals output from DIGITAL OUT jacks (MD/TAPE
OPTICAL OUT) when you set MULTI/2CH A. DIRECT to 2CH
A. DIRECT.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad ju st m e n t Usin g t h e SET UP Bu t t o n
The SET UP button allows you to make the following
adjustments other than specifying the speaker parameters.
So u n d Fie ld Lin k
When set to “ON”, the sound field that was last applied to
a program source is automatically applied whenever it is
selected. For example, if you listen to CD with STADIUM
as the sound field, change to a different program source,
then return to CD, STADIUM will be applied again. If you
do not want to use this function, set to “OFF”. The default
setting is “ON”.
6.1 CH DECODING
This parameter lets you enjoy the appropriate surround
sound from the surround channels. The default setting is
“AUTO”.
1 Press SET UP.
1 Press SET UP.
2 Press the cursor buttons ( or ) to select
2 Press the cursor buttons ( or ) to select “S.
“6.1 CH DECODING”.
FIELD LINK”.
3 Turn the jog dial to select “AUTO”, “ON” or “OFF”.
3 Turn the jog dial to select “ON” or “OFF”.
Notes
• You can set this parameter using 6.1 CH DECODING on the
front panel.
Ad ju st in g t h e CONTROL A1 a u t o p o w e r
o n
• When set to “AUTO”, the receiver performs 6.1 channel matrix
decoding only if 6.1 channel signals decode flag is ON.
• When set to “ON”, the receiver performs 6.1 channel matrix
decoding only if the surround signals are 2 channel, regardless
of the 6.1 channel decode flag.
• When set to “OFF”, the receiver does not perform 6.1 channel
matrix decoding.
• During “A.F.D.” this parameter is always set to “AUTO”, and
you cannot change the setting.
• When the 6.1 channel matrix decoding is performed and the
surround back speaker is set to “NO”, you can enjoy the
surround back signals with Virtual 3D technology, even
without an actual surround back speaker (the box arround SB
does not light up). If the surround back speaker is set to “YES”,
the surround back signals are output through the actual
Lets you turn on the receiver automatically when the
component connected via CONTROL A1 cords (see page
12) is turned on and the playback is started.
When set to “OFF”, you can save the power consumption
of the receiver during standby mode. The default setting
is “ON”.
1 Press SET UP.
2 Press the cursor buttons ( or ) to select “AI
AUTO POWER”.
3 Turn the jog dial to select “ON” or “OFF”.
speaker (
SB
lights up). Please note that you can set the
surround back speaker only when the center speaker is set to
“NO” (page 18).
Ad ju st in g t h e CONTROL A1 a u t o
fu n ct io n
Lets you switch the function of this receiver to the Sony
components connected via CONTROL A1 cords (see page
12) automatically when the connected component is set to
play mode. The default setting is “ON”.
Mu lt i ch a n n e l a ssig n m e n t
Lets you assign a function to MULTI CH. You cannot
assign TUNER or PHONO.
1 Press SET UP.
1 Press SET UP.
2 Press the cursor buttons ( or ) to select
2 Press the cursor buttons ( or ) to select “AUTO
“MULTI CH”.
FUNCTION”.
3 Turn the jog dial to select “NONE”, “VIDEO 1”,
“VIDEO 2”, “DVD/LD”, “TV/SAT”, “MD/TAPE” and
“CD/SACD”.
3 Turn the jog dial to select “ON” or “OFF”.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
CONTROL A1 Control
System
Getting Started
Selecting the command mode of the
remote
This section explains the basic functions of the
CONTROL A1 Control System. Certain components
have special functions, like “CD Synchro Dubbing” on
cassette decks, that require CONTROL A1
connections. For detailed information regarding
specific operations, be sure to also refer to the
Operating Instructions supplied with your
component(s).
Lets you select the command mode of the remote. Change
the command mode when you use 2 Sony receivers in the
same room. The default setting is “AV1”. For details, see
“Selecting the mode of the remote” on page 61.
1 Press SET UP.
2 Press the cursor buttons ( or ) to select
“COMMAND MODE”.
The CONTROL A1 Control System was designed to
simplify the operation of audio systems composed of
separate Sony components. CONTROL A1 connections
provide a path for the transmission of control signals
which enable automatic operation and control features
usually associated with integrated systems.
3 Turn the jog dial to select “AV1” or “AV2”.
Currently, CONTROL A1 connections between a Sony
CD player, amplifier (receiver), MD deck and cassette
deck provide automatic function selection and
synchronized recording.
In the future the CONTROL A1 connection will work as
a multifunction bus allowing you to control various
functions for each component.
Notes
• The CONTROLA1 Control System is designed to maintain
upward compatibility as the Control System is upgraded to
handle new functions. In this case, however, older components
will not be compatible with the new functions.
• Do not operate a 2 way remote control unit when the
CONTROL A1 jacks are connected via a PC interface kit to a
personal computer running “MD Editor” or similar application.
Also, do not operate the connected component in a manner
contrary to the functions of the application, as this may cause
the application to operate incorrectly.
CONTROL A1 and CONTROL A1 compatibility
The CONTROL A1 control system has been updated to the
CONTROL A1 which is the standard system in the SONY
300 disc CD changer and other recent Sony components.
Components with CONTROL A1 jacks are compatible with
components with CONTROL A1 , and can be connected to
each other. Basically, the majority of the functions available
with the CONTROL A1 control system will be available with
the CONTROL A1 control system.
However, when making connections between components
with CONTROL A1 jacks and components with CONTROL
A1 jacks, the number of functions that can be controlled
may be limited depending on the component. For detailed
information, refer to the Operating Instructions supplied with
the component(s).
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Basic Functions
Connect monaural (2P) mini-plug cords in series to the
CONTROL A1 jacks on the back of each component. You
can connect up to ten CONTROL A1 compatible
components in any order. However, you can connect only
one of each type of component (i.e., 1 CD player, 1 MD
deck, 1 tape deck and 1 receiver).
(You may be able to connect more than one CD player or
MD deck, depending on the model. Refer to the operating
instructions supplied with the respective component for
details.)
The CONTROL A1 functions will operate as long as the
component you want to operate is turned on, even if all of
the other connected components are not turned on.
Automatic function selection
When you connect a CONTROL A1 compatible Sony
amplifier (or receiver) to other Sony components using
monaural mini-plug cords, the function selector on the
amplifier (or receiver) automatically switches to the
correct input when you press the play button on one of
the connected components.
Example
Notes
• You must connect a CONTROLA1 compatible amplifier
(receiver) using a monaural mini-plug cord in order to take
advantage of the automatic function selection feature.
• This function only works when the components are connected
to the amplifier (or receiver) inputs according to the names on
the function buttons. Certain receivers allow you to switch the
names of the function buttons. In this case, refer to the
Operating Instructions supplied with the receiver.
• When recording, do not play any components other than the
recording source. It will cause the automatic function selection
to operate.
Amplifier
(Receiver)
CD
MD
Tape
Other
player deck deck component
In the CONTROL A1 control system, the control signals
flow both ways, so there is no distinction of IN and OUT
jacks. If a component has more than one CONTROL A1
jack, you can use either one, or connect different
components to each jack.
CONTROL A1
Synchronized recording
This function lets you conduct synchronized recording
between the selected source and recorder components.
CONTROL A1
1 Set the function selector on the amplifier (or
CD player
receiver) to the source component.
2 Set the source component to pause mode (make
sure both the N and X indicators light together).
MD deck
3 Set the recorder component to the REC-PAUSE
On CONTROL A1 jacks and connections
mode.
It is possible to make connections between CONTROL A1
and CONTROL A1 jacks. For details regarding
particular connections or setup options, refer to the
Operating Instructions supplied with the component(s).
4 Press PAUSE on the recorder component.
The source component is released from the pause
mode, and recording begins shortly thereafter.
When playback ends from the source component,
recording stops.
About the connecting cord
Some CONTROL A1 compatible components are supplied
with a connecting cord as an accessory. In this case, use
the connecting cord for your connection.
When using a commercially available cord, use a
monaural (2P) mini-plug cord less than 2 meters long,
with no resistance (like the Sony RK-G69HG).
Notes
• Do not set more than one component to the pause mode.
• Certain recorder components may be equipped with a special
synchronized recording function that uses the CONTROLA1
Control System, like “CD Synchro Dubbing”. In this case, refer
to the Operating Instructions supplied with the recorder
component.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Additional
Information
If you experience any of the following difficulties while
using the receiver, use this troubleshooting guide to help
you remedy the problem. Also, see “Checking the
connections” on page 22 to verify that the connections are
correct. Should any problem persist, consult your nearest
Sony dealer.
There’s no sound or only a very low-level sound
is heard.
, Check that the speakers and components are
connected securely.
, Make sure that you’ve selected the correct
component on the receiver.
, Press SPEAKERS button if SP. OFF appears on the
display.
, Check that the headphones are not connected to
the PHONES jack.
, Press MUTING if MUTING appears on the display.
, The protective device on the receiver has been
activated because of a short circuit. Turn off the
receiver, eliminate the short-circuit problem and
turn on the power again.
The left and right sounds are unbalanced or
reversed.
, Check that the speakers and components are
connected correctly and securely.
, Adjust front balance parameter in the LEVEL
menu.
Severe hum or noise is heard.
, Check that the speakers and components are
connected securely.
, Check that the connecting cords are away from a
transformer or motor, and at least 3 meters (10 feet)
away from a TV set or fluorescent light.
, Move your TV away from the audio components.
, Make sure you’ve grounded U SIGNAL GND
terminal (only when a turntable is connected).
, The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
There is intermittent sound from a digital source.
, Make sure signals with 96 kHz sampling
frequencies are input to the DVD/LD IN OPTICAL
or COAXIAL jacks.
No sound is heard from the center speaker.
, Make sure the sound field function is on (press
SOUND FIELD MODE).
, Select the appropriate center mode (see pages
29 – 31).
, Adjust the speaker volume (see page 21).
, Make sure the center speaker size parameter is set
to either SMALL or LARGE (see page 18).
52
Download from Www.Somanuals.com. All Manuals Search And Download.
No sound or only a very low-level sound is heard
from the surround speakers.
The surround effect cannot be obtained.
, Make sure the sound field function is on (press
SOUND FIELD MODE).
, Make sure the sound field function is on (press
SOUND FIELD MODE).
, Select the appropriate center mode (see pages
29 – 31).
, Adjust the speaker volume (see page 21).
, Make sure the surround speaker size parameter is
set to either SMALL or LARGE (see page 18).
Nothing appears on the display
, When the display turns off after the receiver is
turned on, press DIMMER to change the display
mode.
No picture or an unclear picture appears on the
TV screen or monitor.
No sound is heard from the sub woofer.
, Make sure the sub woofer is set to YES (see page
, Select the appropriate function on the receiver.
, Set your TV to the appropriate input mode.
, Move your TV away from the audio components.
19).
, Check that 2CH mode has not been selected (see
page 31).
The remote does not function.
, Point the remote at the remote sensor g on the
receiver.
Dolby Digital or DTS multi channel sound is not
reproduced.
, Check that the playing DVD, etc. is recorded in
Dolby Digital or DTS format.
, Remove any obstacles in the path between the
remote and the receiver.
, When connecting the DVD player, etc. to the
digital input jacks of this receiver, check the audio
setting (settings for the audio output) of the
connected component.
, Replace both batteries in the remote with new
ones, if they are weak.
, Make sure you select the correct function on the
remote.
, If the remote is set to operate the TV only, use the
remote to select a source or component other than
TV before operating the receiver or other
component.
Recording cannot be done.
, Check that the components are connected correctly.
, Select the source component by rotating
FUNCTION control.
, When recording from a digital component, make
sure the input mode is set to ANALOG 2CH
FIXED (see page 25) before recording with a
component connected to the analog MD/TAPE
terminals.
Reference sections for clearing the
receiver’s memory
To clear
See
All memorized settings
Customized sound fields
page 16
page 36
, When recording from a digital component, make
sure the input mode is set to COAXIAL FIXED or
OPTICAL FIXED (see page 25) before recording
with the component connected to the DIGITAL
MD/TAPE OUT terminals.
Radio stations cannot be tuned in.
, Check that the antennas are connected securely.
Adjust the antennas and connect an external
antenna if necessary.
, The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use
direct tuning.
, Make sure you set the tuning interval correctly
(when tuning in AM stations with direct tuning)
(see pages 44 and 55).
, No stations have been preset or the preset stations
have been cleared (when tuning by scanning preset
stations). Preset the stations (see page 45).
, Press DISPLAY so that the frequency appears in
the display.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Frequency response
PHONO: RIAA
Outputs
MD/TAPE (OUT);
VIDEO 1, VIDEO 2,
(AUDIO OUT):
Voltage: 250 mV,
Impedance: 10
kilohms
SUB WOOFER:
Voltage: 2 V
Impedance: 1
kilohms
PHONES:
Amplifier section
POWER OUTPUT
equalization curve
0.5 dB
MULTI CH IN,
CD/SACD,
Models of area code SP, AU, E2/E3
Rated Power Output at Stereo mode
(8 ohms at 1 kHz, THD
0.7%)
MD/TAPE,
100 W + 100 W
DVD/LD, TV/SAT,
VIDEO 1, VIDEO 2:
10 Hz - 50 kHz
+ 0.5/–2 dB (with
sound field and
equalizer bypassed)
Reference Power Output
(8 ohms at 1 kHz, THD
10%)
Accepts low- and
high-impedance
headphones
Front1): 110 W/ch
Center1): 110 W
Surround1): 110 W/ch
Inputs (Analog)
PHONO:
EQ
BASS:
Models of area code CN
Rated Power output at stereo mode
(8 ohms at 1 kHz, THD
0.7%)
Sensitivity: 4.0 mV
Impedance:
99 Hz~1.0 kHz
(21 steps)
MID:
198 Hz~10 kHz
(37 steps)
TREBLE:
50 kilohms
S/N2): 86 dB
90 W + 90 W
(at 220 V AC, 50 Hz)
100 W + 100 W
(A, 4.0 mV3))
MULTI CH IN,
CD/SACD,
1.0 kHz~10 kHz
(23 steps)
(at 230 V AC, 50 Hz)
DVD/LD,
MD/TAPE, TV/SAT,
VIDEO 1, VIDEO 2:
Sensitivity: 250 mV
Impedance: 50
kilohms
Gain levels:
+6/–10 dB, 1dB step
Reference Power output
(8 ohms at 1 kHz, THD
10% at 230 V AC, 50
Hz)
Sampling Frequency
48 kHz (TV/SAT,
Front1): 110 W/ch
Center1): 110 W
S/N2): 96 dB
(A, 250 mV3))
MD/TAPE,
OPTICAL IN)
96 kHz (DVD/LD
OPTICAL IN,
COAXIAL IN)
Surround1): 110 W/ch
2) INPUT SHORT
1) Depending on the sound field settings and
sources, there may be no sound output.
3) Weighted network, input level
Inputs (Digital)
DVD/LD (coaxial):
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB (A, 20
kHz LPF)
DVD/LD, TV/SAT,
MD/TAPE (optical):
Sensitivity: –
Impedance: –
S/N: 100 dB (A, 20
kHz LPF)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
S/N
54 dB (at 50 mV/m)
Power consumption
Models of area code
FM tuner section
Tuning range 87.5 - 108.0 MHz
Harmonic distortion
0.5 % (50 mV/m,
AU, SP, CN, E2, E3:
220 W
In standby condition:
0.9 W
Antenna terminals
400 Hz)
75 ohms, unbalanced
Selectivity
At 9 kHz: 35 dB
At 10 kHz: 40 dB
Intermediate frequency
AC outlets
Models of area code
AU, SP:
10.7 MHz
a) You can change the AM tuning interval to
10 kHz. After tuning in any AM station,
turn off the receiver. Hold down the
TUNING + button and press the 1/u
button. All preset stations will be erased
when you change the tuning interval. To
reset the scale to 9 kHz, repeat the procedure.
1 switched, total
100 W maximum
Models of area code
CN, E2, E3:
Sensitivity
Mono: 18.3 dBf, 2.2
µV/75 ohms
Stereo: 38.3 dBf, 22.5
µV/75 ohms
2 switched, total
100 W maximum
Usable sensitivity
11.2 dBf, 1 µV/75 ohms
Dimensions
430 × 157.5 × 369 mm
(17 × 6 1/8 × 14 4/8 in.)
including projecting
parts and controls
Video section
S/N
Mono: 76 dB
Stereo: 70 dB
Inputs
Video: 1 Vp-p 75 ohms
S-video:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
Harmonic distortion at 1 kHz
Mono: 0.3%
Mass (Approx.)
9.5 kg (20 lb. 16 oz.)
Stereo: 0.5%
Outputs
Video: 1 Vp-p 75 ohms
S-video:
Supplied accessories
See page 4.
Separation
45 dB at 1 kHz
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
Frequency response
30 Hz - 15 kHz
For details on the area code of the
component you are using, see
page 3.
General
+0.5/–2 dB
System
Tuner section:
PLL quartz-locked
digital synthesizer
system
Preamplifier section:
Low-noise NF type
equalizer
Selectivity
60 dB at 400 kHz
The specification measured is under
• 230 V AC 50 Hz condition (models
of area code SP, CN)
• 240 V AC 50 Hz condition (models
of area code AU, E2, E3)
AM tuner section
Tuning range Models of area code
AU, SP, CN
Power amplifier
section:
531 - 1602 kHz (9 kHz
step)
Models of area code E2,
E3
Design and specifications are subject
to change without notice.
Pure-complementary
SEPP
530 - 1610 kHz (10 kHz
step)a)
Power requirements
Models of area code
531 - 1602 kHz (9 kHz
step)a)
AU:
240 V AC, 50 Hz
Antenna
Loop antenna
Models of area code SP,
CN:
Intermediate frequency
220 - 230 V AC,
50/60 Hz
450 kHz
Usable sensitivity
Models of area code E2,
E3:
50 dB/m (at 1,000 kHz
or 999 kHz)
120/220/240 V AC,
50/60 Hz
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Surround sound
Dolby Digital
Sound that consists of three elements:
direct sound, early reflected sound
(early reflections) and reverberative
sound (reverberation). The acoustics
of the surrounding space affect the
way these three sound elements are
heard. Surround sound combines
these sound elements in such a way
that you actually can sense the size of
the venue, as well as its type.
This sound format for movie theaters
is more advanced than Dolby Pro
Logic Surround. In this format, the
surround speakers output stereo
sound with an expanded frequency
range and a sub woofer channel for
deep bass is independently provided.
This format is also called “5.1”
because the sub woofer channel is
counted as 0.1 channel (since it
functions only when a deep bass
effect is needed). All six channels in
this format are recorded separately to
realize superior channel separation.
Furthermore, since all the signals are
processed digitally, less signal
degradation occurs.
• Types of sound
Reverberation
Early reflections
Direct sound
Digital Cinema Sound
This is the generic name of the
surround sound produced by digital
signal processing technology
developed by Sony. Unlike previous
surround sound fields mainly
directed at the reproduction of music,
Digital Cinema Sound is designed
specifically for the enjoyment of
movies.
• Transition of sound from surround
speakers
Direct sound
Level
Early
reflections
Reverberation
Time
Early reflection time
Dolby Pro Logic Surround
As one method of decoding Dolby
Surround, Dolby Pro Logic Surround
produces four channels from two-
channel sound. Compared with the
former Dolby Surround system,
Dolby Pro Logic Surround reproduces
left-to-right panning more naturally
and localizes sounds more precisely.
To take full advantage of Dolby Pro
Logic Surround, you should have one
pair of surround speakers and a
center speaker. The surround speakers
output monaural sound.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of settings using SURR, LEVEL, EQ, and SET UP
buttons
You can make various settings using the LEVEL, SURR, EQ, SET UP buttons, jog dial, and cursor buttons. The tables below
show each of the settings that these buttons can make.
Press
Press
or
to select
Turn jog dial to select
Page
SURR
PRO LOGIC
EFFECT
AUTO, ON, OFF
34
depends on sound field (21 steps)
–8 to +8 (1 increment steps)
–8 to +8 (1 increment steps)
DRY, WET, STD
WALL S__I__H
REVERB S__I__L
FRONT REVERB
SCREEN DEPTH
DEEP, MID, OFF
VIR. SPEAKERS
ON, OFF
LEVEL
FRONT L__I__R
–8 dB to +8 dB (1 dB steps)
–8 dB to +8 dB (1 dB steps)
–10 dB to +6 dB (1 dB steps)
–10 dB to +6 dB (1 dB steps)
–10 dB to +6 dB (1 dB steps)
–10 dB to +6 dB (1 dB steps)
OFF, –20 dB to 0 dB (1 dB steps)
OFF, 0.1 to 0.9 (0.1 steps), STD, MAX
–10 dB to +6 dB (1 dB steps)
99 Hz to 1.0 kHz (21 steps)
–10 dB to +6 dB (1 dB steps)
198 Hz to 10.0 kHz (37 steps)
–10 dB to +6 dB (1 dB steps)
1.0 kHz to 10 kHz (23 steps)
–10 dB to +6 dB (1 dB steps)
99 Hz to 1.0 kHz (21 steps)
–10 dB to +6 dB (1 dB steps)
198 Hz to 10 kHz (37 steps)
–10 dB to +6 dB (1 dB steps)
1.0 kHz to 10 kHz (23 steps)
–10 dB to +6 dB (1 dB steps)
99 Hz to 1.0 kHz (21 steps)
–10 dB to +6 dB (1 dB steps)
1.0 kHz to 10 kHz (23 steps)
–10 dB to +6 dB (1 dB steps)
99 Hz to 1.0 kHz (21 steps)
–10 dB to +6 dB (1 dB steps)
1.0 kHz to 10 kHz (23 steps)
35
SURROUND L__I__R
CENTER LEVEL XXX dB
SURROUND LEVEL XXX dB
SURR BACK LEVEL XXX dB
S. WOOFER LEVEL XXX dB
LFE MIX XXX dB
D. RANGE COMP.
EQ
FRONT BASS GAIN
36
FRONT BASS FREQUENCY
FRONT MID GAIN
FRONT MID FREQUENCY
FRONT TREBLE GAIN
FRONT TREBLE FREQUENCY
CENTER BASS GAIN
CENTER BASS FREQUENCY
CENTER MID GAIN
CENTER MID FREQUENCY
CENTER TREBLE GAIN
CENTER TREBLE FREQUENCY
SURROUND BASS GAIN
SURROUND BASS FREQUENCY
SURROUND TREBLE GAIN
SURROUND TREBLE FREQUENCY
SURROUND BACK BASS GAIN
SURROUND BACK BASS FREQUENCY
SURROUND BACK TREBLE GAIN
SURROUND BACK TREBLE FREQUENCY
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of settings using SURR, LEVEL, EQ, and SET UP buttons
Press
Press
or
to select
Turn jog dial to select
LARGE, SMALL
Page
SET UP button
FRONT
CENTER
17
LARGE, SMALL, NO
LARGE, SMALL, NO
LARGE, SMALL, NO
YES, NO
SURROUND
SURR BACK
SUB WOOFER
FRONT XX.X meter
1.0 meter (3 feet) to 12.0 meters (40 feet)
(0.1 meter (1 foot) steps)
CENTER XX.X meter
1.0 meter (3 feet) to 12.0 meters (40 feet)
(0.1 meter (1 foot) steps)
SURROUND XX.X meter
SURR BACK XX.X meter
SUB WOOFER XX.X meter
1.0 meter (3 feet) to 12.0 meters (40 feet)
(0.1 meter (1 foot) steps)
1.0 meter (3 feet) to 12.0 meters (40 feet)
(0.1 meter (1 foot) steps)
1.0 meter (3 feet) to 12.0 meters (40 feet)
(0.1 meter (1 foot) steps)
S.W PHASE
NORMAL, REVERSE
meter, feet
DISTANCE UNIT
SURR POSI.
SIDE, MIDDLE, BEHIND
HIGH, LOW
SURR HEIGHT
SURR BACK HGT.
FRONT SP > XXX Hz1)
CENTER SP > XXX Hz1)
SURROUND SP > XXX Hz1)
SURR BACK SP > XXX Hz1)
LFE HIGH CUT > XXX Hz
6.1CH DECODING
MULTI CH
HIGH, LOW
40 Hz to 200 Hz (10 Hz steps)
40 Hz to 200 Hz (10 Hz steps)
40 Hz to 200 Hz (10 Hz steps)
40 Hz to 200 Hz (10 Hz steps)
40 Hz to 200 Hz (10 Hz steps)
AUTO, ON, OFF
49
NONE, Every functions (except for TUNER
and PHONO)
S.FIELD LINK
ON, OFF
ON, OFF
ON, OFF
AV1, AV2
A1 AUTO POWER
AUTO FUNCTION
COMMAND MODE
1)
When the speakers are set to SMALL only.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Button Description
You can use the remote to operate the components in your system. The tables below show the settings of each button.
Remote Button
Operations
Function
Remote Button
Operations
Function
ENTER
TV/VCR/SAT/ After selectig a channel,
SLEEP
Receiver
Activates the sleep
function and the
duration which the
receiver turns off
automatically.
Tape deck/
LD player/
VCD player/
MD deck/
DAT deck
disc or track using the
numeric buttons, press
to enter the value.
AV ?/1
TV/VCR/
Turns the audio and
video components on or
off.
SHIFT
Receiver
Press repeatedly to select
a memory page for
presetting radio stations
or tuning to preset
stations.
CD player/
DVD player/
MD deck/
VCD player/
LD player/
DAT deck
D.TUNING
Receiver
Tuner station direct key-
in mode.
?/1
Receiver
Receiver
Receiver
Receiver
Receiver
Receiver
Receiver
Turns the receiver on or
off.
./>
CD player/
MD deck/
Skips tracks.
VIDEO 1
VIDEO 2
DVD/LD
TV/SAT
AUX
To watch VCR.
(VTR mode 3)
DVD player/
LD player/
VCD player/
Tape deck/VCR/
DAT deck
To watch VCR.
(VTR mode 1)
To watch DVD or laser
disc.
m/M
CD player/
DVD player/
VCD player
Searches tracks
(forward or backward).
To watch TV programs or
satellite receiver.
MD deck/
Fastforwards or rewinds.
To listen to an audio
equipment.
Tape deck/VCR/
LD player/
DAT deck
MD/TAPE
To listen to Minidisc or
audio tape.
n
N
Tape deck
Starts play on the
reverse side.
CD/SACD
TUNER
Receiver
Receiver
To listen to compact disc.
To listen to radio
programs.
CD player/
MD deck/Tape
deck/VCR/
DVD player/
VCD player/
LD player/
DAT deck
Starts play.
PHONO
AV 1
Receiver
Remote
To listen to turntable.
Select the mode of the
remote.
AV 2
0-9
X
CD player/
MD deck/Tape
deck/VCR/
DVD player/
VCD player/
LD player/
DAT deck
Pauses play or record.
(Also starts recording
with components in
record standby.)
Receiver
Use with “SHIFT” button
to select tuner preset
station numeric input
during DIRECT
TUNING or MEMORY
mode.
CD player/
MD deck/
VCD player/
LD player/
DAT deck
Selects track numbers.
0 selects track 10.
x
CD player/
MD deck/Tape
deck/VCR/
DVD player/
VCD player/
LD player/
DAT deck
Stops play.
TV/VCR/SAT
Selects channel numbers.
>10
CD player/
MD deck/
Tape deck/
LD player/
VCD player
Selects tracks numbers
over 10.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Button Description
Remote Button
Operations
Function
Remote Button
TEST TONE
EQ/TONE
Operations
Receiver
Receiver
Receiver
Function
DISC
CD player/
VCD player
Select discs (multi-disc
changer only).
Press to output test tone.
EQ ON/OFF.
D. SKIP/CH/
PRESET +/–
Receiver
Scans and selects preset
stations.
MULTI /2CH
A. DIRECT
Selects MULTI CH IN
and 2CH ANALOG
DIRECT source.
TV/VCR/SAT
Selects preset channels.
CD player/
VCD player
MD deck
Skips discs (multi-disc
changer only).
MUTING
Receiver
Mutes the sound from
the receiver.
AV DISPLAY
TV/VCR/
Selects information
displayed on the TV
screen.
MONITOR
TV/VIDEO
TV
Press to activate TV
control buttons. Press
again to restore original
category.
LD player/
DVD player/
VCD player
TITLE/GUIDE
AV MENU
DVD player
VCR/SAT
Displays title and guide.
Displays menu.
TV/VCR
Selects input signal: TV
input or video input.
DVD player
VCR/SAT
SEARCH MODE
CLEAR
DVD player
DVD player
Selects searching mode.
Press if you made a
mistake when you press
the number button.
MAIN MENU
Receiver
Press this button
repeatedly to select one
of the five cursor
modes: LEVEL,
SURROUND, EQ,
NAME and SET UP.
VCD player
TV
Press to go back to the
previous menu.
WIDE
-/--
Selects the wide picture
mode.
U/u/I/i
DVD player
VCR/SAT
Selects a menu item.
TV/VCR
Selects the channel
entry mode, either
one or two digit.
U/u
Receiver
Receiver
Selects a menu item.
I/i
Makes adjustment or
change the setting.
ANT TV/VTR
VCR
Selects output signal
from the aerial terminal:
TV signal or VCR
program.
ENTER /
EXEC
DVD player/
VCR/SAT
Enters the selection.
EXIT/RETURN
DVD player
VCR/SAT
Returns to the previous
menu or exits the menu.
JUMP
TV
TV
Toggles between the
previous and the current
channels.
MASTER VOL
+/–
Receiver
Adjusts the master
volume of the receiver.
SUB CH +/–*
Selects preset channels
for the small picture.
* Only for Sony TVs with the picture-in-picture function.
VOL +/–
TV
TV
Adjust the volume of TV.
Notes
POSITION*
Changes the position of
the small picture.
• Some functions explained in this section may not work
depending on the model of the receiver.
• The above explanation is intended to serve as an example only.
Therefore, depending on the component the above operation
may not be possible or may operate differently than described.
• The /10, /11, /12, 3RD, VIDEO 3, 2ND ROOM, ON SCREEN,
NIGHT MODE and AUDIO SPLIT functions are not available
for set operation.
MUTING
(with PAUSE)
TV
Mutes the sound from
TV.
SWAP*
TV
Swaps the small and the
large picture.
P IN P*
TV
Activates the picture-in-
picture function.
INPUT MODE
Receiver
Selects input mode for
your digital components.
A. F. D.
MODE +/–
2CH
Receiver
Receiver
Receiver
Receiver
Auto Format Decoding.
Selects sound field mode.
Selects 2CH mode.
PRESET
Selects CINEMA
STUDIO EX A, B, C,
DIGITAL CONCERT
HALL A or B.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the mode of the remote
Programming the remote
You can program the remote to control non-Sony
components by changing the code. Once the control
signals have been memorized, you can use those
components as part of your system.
Set the remote mode using the USE MODE button and the
remote mode buttons.
AV
? / 1
? / 1
SLEEP
Furthermore, you can also program the remote for Sony
components that the remote is unable to control. Note that
the remote can only control components that accept
infrared wireless control signals.
USE MODE
SYSTEM
STANDBY
VIDEO 1 VIDEO 2 VIDEO 3 DVD/LD
TV/SAT
PHONO
AUX
MD/TAPE CD/SACD TUNER
AV1
AV2
3RD
2ND ROOM
MONITOR
Note
1
2
3
(SOURCE)
When you assign a component to the MONITOR button, you can
operate the programmed component without changing the
function of the receiver.
TV/VIDEO
INPUT MODE
4
7
5
8
0
6
9
SEARCH
MODE
AUDIO
SPLIT
WIDE
ANT
TV/VTR
DISC
CLEAR
– /–
SHIFT
>10
ENTER
1 Press AV ?/1 while pressing down USE MODE.
D.TUNING
/11
/10
/12
JUMP
The indicator lights.
– SUB CH +
POSITION SWAP
m
M
.
>
D. SKIP/
CH/PRESET
MUTING
P IN P
–
VOL
+
2 Press the function button (including MONITOR) for
the component you want to control.
For example, if you are going to control a CD player,
press CD.
X
x
n
N
SOUND FIELD 2CH
A.F.D.
MODE
PRESET
AV
DISPLAY
TEST
TONE
NIGHT
MODE
MULTI/2CH
A. DIRECT
EQ/TONE
AV
MENU
ON
SCREEN
TITLE
GUIDE
MUTING
MASTER
VOL
3 Press the numeric buttons to enter the numeric
code (or one of the codes if more than one code
exists) corresponding to the component and the
maker of the component you want to control.
See the tables on pages 62 and 63 for information on
the numeric code(s) corresponding to the component
and the maker of the component (the first digit and
the last two digits of the numeric code correspond to
the category and the maker’s code respectively.)
MAIN
MENU
ENTER/
EXEC
EXIT/
RETURN
Selecting the command mode
You can switch the command mode (AV1 or AV2) of the
remote. If the command mode of the receiver and the
remote is different, you cannot use the remote to operate
the receiver.
4 Press ENTER.
Once the numeric code has been verified, the indicator
slowly flashes twice and the remote automatically
exits the programming mode.
Press 1 (AV1) (or 2 (AV2)) while pressing down USE
MODE.
The indicator lights once (twice for AV2), then the
command mode switches.
5 Repeat steps 1 to 4 to control other components.
To check the mode of the remote
Press USE MODE. You can check the remote by the
indicator.
To cancel programming
Press USE MODE during any step. The remote
automatically exits the programming mode.
Mode
AV1
Indicator lights
once
z To activate the function after programming.
Press the programmed button to activate the function you want.
AV2
twice
z If programming is unsuccessful, check the following:
• If the indicator does not light up in step 1, the batteries are
weak. Replace both batteries.
• If the indicator flashes 4 times in quick succession while
entering the numeric code, an error has occurred. Start again
from step 1.
To reset the remote to factory settings
Press ?/1, AV ?/1, and MASTER VOL – at the same
time.
The indicator lights 3 times, then goes off.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Button Description
Notes
To control a CD player
• The indicator turns off while a valid button is pressed.
• In step 2, if several function buttons are pressed, only the last
pressed button is valid.
• In step 3, if a function button is pressed, the new function is
selected and the programming procedure returns to the
beginning of step 3.
Maker
Code(s)
SONY
101, 102, 103
104, 123
105, 106, 107
108, 109, 110
111, 116
DENON
JVC
• For the numeric codes, only the first three numbers entered are
valid.
KENWOOD
MAGNAVOX
MARANTZ
ONKYO
To clear the memory of the remote
To clear all programmed and learned signals, do the
following to reset the remote to factory settings.
116
112, 113, 114
115
PANASONIC
PHILIPS
Press ?/1, AV ?/1 and MASTER VOL – at the same
time.
116
The indicator flashes 3 times, then goes off.
PIONEER
TECHNICS
YAMAHA
117
115, 118, 119
120, 121, 122
The numeric codes corresponding to the
component and the maker of the component
Use the numeric codes in the tables below to control non-
Sony components and also Sony components that the
remote is normally unable to control. Since the remote
signal that a component accepts differs depending on the
model and year of the component, more than one numeric
code may be assigned to a component. If you fail to
program your remote using one of the codes, try using
other codes.
To control a DAT deck
Maker
Code(s)
SONY
203
219
PIONEER
To control an MD deck
Maker
Code(s)
Notes
SONY
301
302
303
304
• The numeric codes are based on the latest information available
for each brand. There is a chance, however, that your
component will not respond to some or all of the codes.
• All of the functions on this remote may not be available when
used with your particular component.
DENON
JVC
KENWOOD
To control a tape deck
Maker
Code(s)
SONY
201, 202
204, 205
206, 207, 208, 209
210
DENON
KENWOOD
NAKAMICHI
PANASONIC
PHILIPS
216
211, 212
213, 214
215, 216
217, 218
PIONEER
TECHNICS
YAMAHA
62
Download from Www.Somanuals.com. All Manuals Search And Download.
To control an LD player
To control a DVD player
Maker
Code(s)
601, 602, 603
606
Maker
Code(s)
401
SONY
SONY
PIONEER
PANASONIC
PHILIPS
PIONEER
TOSHIBA
DENON
402, 406
407
To control a video CD player
403
Maker
Code(s)
404
SONY
605
405
To control a VCR
Maker
To control a TV
Maker
Code(s)
Code(s)
SONY
701, 702, 703, 704, 705, 706
710, 750, 757, 758
707, 708, 709, 759
740
SONY
501
AIWA
DAEWOO
FISHER
504, 505, 506, 507, 515, 544
508
AKAI
BLAUPUNKT
EMERSON
FISHER
GOLDSTAR
GRUNDIG
HITACHI
503, 511, 512, 515, 534, 544
517, 534
711, 712, 713, 714, 715, 716, 750
717, 718, 719, 720
513, 514, 515, 544
521, 522
GENERAL ELECTRIC 721, 722, 730
ITT/NOKIA
JVC
GOLDSTAR
GRUNDIG
HITACHI
723, 753
516
724
MAGNAVOX
MITSUBISHI/MGA
NEC
503, 518, 544
503, 519, 544
503, 520, 544
509, 524
722, 725, 729, 741
717
ITT/NOKIA
JVC
726, 727, 728, 736
730, 731, 738
732, 733, 734, 735
736
PANASONIC
PHILIPS
MAGNAVOX
MITSUBISHI/MGA
NEC
515, 518
PIONEER
RCA/PROSCAN
SAMSUNG
SANYO
509, 525, 526, 540
510, 527, 528, 529, 544
503, 515, 531, 532, 533, 534, 544
508, 545
PANASONIC
PHILIPS
729, 730, 737, 738, 739, 740
729, 730, 731
729
PIONEER
SHARP
535
RCA/PROSCAN
SAMSUNG
SANYO
722, 729, 730, 731, 741, 747
742, 743, 744, 745
717, 720, 746
748, 749
TELEFUNKEN
THOMSON
TOSHIBA
ZENITH
523, 536, 537, 538
530, 537, 539
535, 540, 541
542, 543
SHARP
TELEFUNKEN
TOSHIBA
751, 752
To control a satellite tuner or cable box
747, 755, 756
754
Maker
Code(s)
ZENITH
SONY
801, 802, 803
JERROLD/G.I.
PANASONIC
RCA
806, 807, 808, 809, 810, 811, 812, 813, 814
818
804, 805
815, 816, 817
S. ATLANTA
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
H
S
Adjusting
Hookups
Scanning
brightness of the display 23
speaker volumes 21
surround parameters 34
Automatic tuning 44
MULTI CH IN Input 10
AC power cord 12
antennas 5
audio components 6
digital components 8
preset stations. See Preset
tuning
radio stations. See Automatic
tuning
Selecting
B
C
CONTROL A1
video components 7
12
component 25
sound field 29
Sleep timer 48
Sound field
adjustable parameters 37–41
customizing 34–41
pre-programmed 30, 31
resetting 36
Basic receiver operations
23–27
Batteries 4
I, J, K
Indexing. See Naming
L, M
Changing
display 23
Labeling. See Naming
selecting 29
effect level 34
N, O
Speakers
adjusting speaker volume 21
connection 14
Checking the connections 22
Clearing receiver’s memory 16
Connecting. See Hookups
Naming
preset stations 47
program sources 47
impedence 15
CONTROL A1
12, 50
placement 17–21
Supplied accessories 4
Surround sound 28–41
Crossover frequency 21
Customizing sound fields 34–41
P, Q
Parameter 37–41
Preset stations
how to preset 45
how to tune 45
Preset tuning 45
D
T
Demonstration mode 16
Digital Cinema Sound 56
Direct tuning 44
Test tone 21
Troubleshooting 52
Tuning
Dolby Digital 56
automatically 44
directly 44
preset stations 45
R
Dolby Pro Logic Surround 56
Dubbing. See Recording
Receiving broadcasts
automatically 44
directly 44
preset stations 45
Recording
E, F, G
U, V, W, X, Y, Z
Editing. See Recording
Effect level 34
EQ 36
Unpacking 4
on an audio tape or MD 47
on a video tape 48
Sony Corporation Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|