3-862-573-11 (1)
Operating Instructions
f
CDP-CX210
1998 by Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Getting Started
Unpacking ............................................................................................................................ 4
Hooking Up the System ..................................................................................................... 4
Inserting CDs ....................................................................................................................... 6
Playing a CD ............................................................................................................................ 8
Playing CDs
Locating a Specific Disc .................................................................................................. 10
Specifying the Next Disc to Play ................................................................................... 10
Locating a Specific Track or a Point in a Track ............................................................ 11
Playing Repeatedly ........................................................................................................... 12
Playing in Random Order (Shuffle Play) ...................................................................... 12
Creating Your Own Program (Program Play) .............................................................. 13
Playing Discs in a Group (Block Play) ........................................................................... 15
Additional Information
Precautions ........................................................................................................................ 16
Notes on CDs ..................................................................................................................... 16
Troubleshooting ................................................................................................................ 17
Specifications ..................................................................................................................... 17
Index.......................................................................................................................................... 18
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
Unpacking
Hooking Up the System
Check that you received the following items:
• Audio cord (1)
Overview
• Remote commander (remote) (1)
• Sony SUM-3 (NS) batteries (2)
• CD booklet holders (2) and label (1)
This section describes how to hook up the CD player to
an amplifier. Be sure to turn off the power of each
component before making the connections.
COMMAND
MODE
How to use the CD booklet holder
CONTROL A1
The CD booklet holder helps you locate the disc easily.
After you have inserted discs into the player, you can put
the CD booklet (which comes with a CD) into the
supplied holder. Put two CD booklets facing back to back
into a pocket. Stick the number label on each pocket,
matching the number of the disc slot where you have
inserted the disc. You can put up to 200 CD booklets into
the holders.
CD player
To an AC outlet
Inserting batteries into the remote
To line output (R)
To audio input
: Signal flow
You can control the player using the supplied remote.
Insert two size AA (R6) batteries by matching the +
and – on the batteries to the diagram inside the battery
compartment.
Insert the negative (–) end first, then push in and down
until the positive (+) end clicks into position.
When using the remote, point it at the remote sensor g
on the player.
To line output (L)
Amplifier
To an AC outlet
What cords will I need?
Audio cord (1) (supplied)
When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the player,
replace all the batteries with new ones.
White
(L)
Red
(R)
White
(L)
Red
(R)
Notes
•
•
•
•
Do not leave the remote near an extremely hot or humid
place.
Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
If you do not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
When using another Sony CD player together with
this player
Hookups
When connecting the audio cord, be sure to match the
color-coded cord to the appropriate jacks on the
components: Red (right) to Red and White (left) to
White. Be sure to make connections firmly to avoid
hum and noise.
You can make the supplied remote effective only for this
player.
•
When using the player equipped with the
COMMAND MODE selector:
Set the COMMAND MODE selector of this player to
CD1 and that of another player to CD2 or CD3. Then
set the CD1/ 2/ 3 switch on the remote supplied for
each player accordingly.
CD player
Amplifier
LINE OUT
INPUT
CD
L
•
When using the player not equipped with the
COMMAND MODE selector:
L
The command mode of the player without the
COMMAND MODE selector is set to CD1. Set the
COMMAND MODE selector of this player to CD2, and
set the CD1/ 2/ 3 switch on the remote to CD2.
R
R
• If you have a Sony receiver (amplifier) equipped with
the CONTROL A1 jack
Be sure to connect the player to the CD IN jacks on the
receiver (amplifier). When making this connection, set the
COMMAND MODE of the player to CD1 (see the
illustration below). If you further connect the player and
the receiver (amplifier) via the CONTROL A1 jacks with the
monaural (2P) mini-plug cord (not supplied), you can use
the Auto Function feature between these components. For
details, refer to the supplementary “S-LinkTM/ CONTROL-
A1 Control System” instructions and the instructions
supplied with the receiver (amplifier).
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
Note on placement
Be sure to place the player on a horizontal place.
If the player is slanted, it may cause malfunction or
damage the player.
When to use the COMMAND MODE selector
The COMMAND MODE selector is set to CD1 at the
factory for normal use. You can control this player by
connecting to a Sony CD Player with the player control
function, via the CONTROL A1 jacks. When making this
connection, set the COMMAND MODE selectors of each
player to the appropriate position according to the
connected line input jacks. For details, refer to the
instructions supplied with the connected player.
COMMAND MODE
CD
1
2
3
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
The disc number at the loading position appears in
the display.* As you turn the JOG dial, the disc
number changes.
Inserting CDs
You can insert up to 200 discs into this player.
ALL DISCS
1
2
3
4
5
6
7
8
POWER
Front cover OPEN
JOG
d1SC
2 0
CD 1
Disc number
You can arrange your discs into groups and play
them within a certain group using the Block Play
function. When using this function, you have to
insert discs into the slots assigned to one of the
eight groups. For details, see “Playing Discs in a
Group” on page 15.
POR
* If you have already inserted discs, the disc number at
the playing position appears. When you turn the JOG
dial, the displayed disc number changes to the one at
the loading position.
Playing position
Rotary table
4
Insert a disc with the label side facing right.
Loading position
Notes
•
Make sure you have inserted the disc into each slot at
a right angle to the rotary table. If the disc is not put
in straight, it may damage the player or the disc.
Make sure the rotary table comes to a complete stop
before inserting or removing discs.
1
2
Press POWER to turn on the player.
Press OPEN.
•
Front
cover
3
Turn the JOG dial until you find the disc slot
where you want to insert a disc, while checking the
disc number (written beside every five slots and
also indicated in the display).
With the label side facing right
5
Repeat Steps 3 and 4 to insert more discs.
Disc number
Disc slot at the loading
position
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
6
Close the front cover by pressing the right edge of
the cover until it clicks.
The rotary table turns and the disc slot at the
loading position is set to the playing position.
Always close the front cover except when you
insert or remove discs.
The supplied CD booklet holders help you locate a
disc
You can store up to 200 CD booklets. Insert booklets and
stick the number label on the film of a pocket and the
booklet so that you can locate the disc easily.
Notes
•
When you insert an 8 cm (3-inch) CD, be sure to attach a
Sony CSA-8 adaptor (not supplied) to the disc.
Do not insert an empty 8 cm (3-inch) CD adaptor (CSA-8). It
may damage the player.
•
•
•
Do not attach anything such as seals or sleeves to CDs. It may
damage the player or the disc.
If you drop a disc into the player and the CD won‘t go into
the slot correctly, consult your nearest Sony dealer.
When transporting the player, remove all discs from the
player.
Removing CDs
After following Steps 1 to 3 of “Inserting CDs” on page
6, remove the discs. Then close the front cover.
Note
The disc being played does not come to the loading position if
you open the front cover during playback. (The disc number
flashes in the display.)
If you want to remove the disc being played, press ENTER in
the center of the JOG dial after opening the front cover. The
disc comes to the loading position. Remove the disc after the
rotary table comes to a complete stop.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra t io n s
Pla yin g a CD
2 3
4 5
ENTER
ENTER
AMS
CONTINUE SHUFFLE PROGRAM REPEAT
POWER
CHECK
CLEAR
BLOCK
1
BLOCK
2
BLOCK
3
BLOCK
4
OPEN
BLOCK
5
BLOCK
6
BLOCK
7
BLOCK
8
• See pages 4 – 5 for the hookup
Turn on the amplifier and select the CD player position.
Press POWER to turn on the player.
information.
1
2
3
• Make sure you have inserted the
discs correctly as indicated on
page 6.
• You can play all the tracks on a
disc in the original order
(Continuous Play). You can also
play up to 200 discs
Press CONTINUE to select ALL DISCS or 1 DISC Continuous
Play mode.
Each time you press CONTINUE, “ALL DISCS” or “1 DISC”
appears in the display.
consecutively.
You can turn on the player
by pressing POWER on the
remote Z
When you select
The player plays
ALL DISCS
All discs in the player consecutively in the order of
disc number. Empty disc slots are skipped.
1 DISC
Only one disc you have selected
Turn the JOG dial until the disc number you want appears in
the display to select the first disc (ALL DISCS) or the disc you
want (1 DISC).
4
ALL DISCS
1
2
3
4
5
6
7
8
d1SC
2 0
CD 1
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra t io n s
Press ENTER to start playing.
The selected disc is set to the playing position, and the player
plays all the discs from the selected one (ALL DISCS) or all the
tracks once (1 DISC).
5
Adjust the volume on the amplifier.
When you turn off the player
by pressing the POWER
switch (standby mode)
The player remembers the
last playing disc and the
play mode (Continuous,
Shuffle (see page 12) or
Program (see page 13)).
When you turn on the
Display information w hile playing a disc
While playing a disc, the display shows the current disc number, track
number, playing time of the track and the next disc number.
Next disc number
Current disc number
ALL DISCS
DISC
1
2
3
4
5
6
7
8
TRACK
NEXTDISC
MIN
SEC
player again, therefore, the
player plays the same disc in
the same play mode. Note
that the player does not
remember this information,
if you turn off the player by
pressing the power switch of
the amplifier or receiver
while the AC power cord is
connected to the switched
AC outlet of the amplifier or
receiver.
20 1
0 28 57
CD 1
Current track number
Playing time of the track
To stop playback
Press p.
≠/± ENTER
OPEN
ENTER
AMS
CONTINUE SHUFFLE PROGRAM REPEAT
POWER
CHECK
CLEAR
BLOCK
BLOCK
1
5
BLOCK
BLOCK
2
6
BLOCK
BLOCK
3
7
BLOCK
BLOCK
4
8
OPEN
·
P
p
To
Press
P
Pause
Resume playing after pause
Go to the next disc
P or ·
DISC SKIP + once.
Hold down the button to skip discs.
Go back to the preceding disc
Go to the next track
DISC SKIP – once.
Hold down the button to skip discs.
±
≠
Go back to the preceding track
Stop playing and remove the disc
OPEN and then ENTER. The disc comes
to the loading position.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g CDs
Locating a Specific Disc
Specifying the Next Disc to
Play
ENTER
JOG
You can specify the next disc to play while playing a
disc in Continuous or 1 DISC Shuffle Play mode.
While playing a disc, turn the JOG dial until the disc
number you want appears in the display.
POWER
Next disc number
ALL DISCS
1
2
3
4
5
6
7
8
DISC
TRACK
NEXT DISC
MIN
SEC
20 1
0 28 38
CD 1
After the current disc is played, the next disc you have
specified starts playing.
If you want to skip to the next disc right away, press
ENTER while playing the current disc.
DISC
To cancel the disc you have specified
Press CONTINUE twice.
Number
buttons
ENTER
Selecting a disc on the player
Turn the JOG dial until the disc number you want
appears in the display. Press ENTER to start play.
Selecting a disc directly using the remote
1
Press DISC.
2
Press the number button of the disc.
Example: To enter number 35
Press 3, then 5.
To enter number 100
Press 1, then 0 twice.
3
Press ENTER to start play.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g CDs
To locate
Press
Locating a Specific Track or a
Point in a Track
the next or
succeeding tracks
± repeatedly until you find the
track
the current or
≠ repeatedly until you find the
You can quickly locate any track while playing a disc
using the ≠/± (AMS: Automatic Music Sensor)
buttons or number buttons on the remote. You can also
locate a specific point in a track while playing a disc.
preceding tracks
track
a specific track
directly Z
TRACK, the number button of the
track, and then ENTER. When you
locate a track with a number over 10,
press the 10’s digit first, then the 1’s
digit.
a point in a track
) (forward) or 0 (backward) and
while monitoring the hold down until you find the point
sound Z
POWER
a point in a track
) (forward) or 0 (backward) and
quickly by observing hold down until you find the point
the display Z
during pause. You will not hear the
sound during the operation.
≠/±
Note
If “
” appears in the display, the disc has reached the end
while you were pressing ). Press 0 or ≠ to go back.
TRACK
Number
buttons
ENTER
=/+
0/)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g CDs
Playing Repeatedly
Playing in Random Order
(Shuffle Play)
You can play discs/ tracks repeatedly in any play
mode.
You can have the player “shuffle” the tracks and play
in random order. The player shuffles all the tracks on
all discs or on the disc you specified.
REPEAT
·
ENTER
JOG
SHUFFLE
POWER
POWER
Press REPEAT while playing a disc.
“REPEAT” appears in the display. The player repeats
the discs/ tracks as follows:
1
Press SHUFFLE to select ALL DISCS or 1 DISC
Shuffle Play mode.
Each time you press SHUFFLE, “ALL DISCS” or
“1 DISC” appears in the display.
When the disc is played in
The player repeats
ALL DISCS Continuous Play
(page 8)
All tracks on all discs
1 DISC Continuous Play
(page 8)
All tracks on the current disc
When you select
The player plays
ALL DISCS
All tracks on all discs in
random order. The player
keeps shuffling tracks until
you stop playback.*
ALL DISCS Shuffle Play
(page 12)
The player does not repeat
discs/ tracks but keeps
shuffling until you stop
playback whether or not you
press REPEAT.
1 DISC
All tracks on the specific disc
in random order
1 DISC Shuffle Play
(page 12)
All tracks on the current disc
in random order
* The player may play the same track more than once.
Program Play (page 13)
The same program
2
3
When you want to specify the disc for 1 DISC
Shuffle Play, turn the JOG dial until the disc
number you want appears in the display.
To cancel Repeat Play
Press REPEAT repeatedly until “REPEAT” disappears from
Press ENTER or ·.
ALL DISCS or 1 DISC Shuffle Play starts.
the display.
“
” appears in the display while the player is
“shuffling” the discs or the tracks.
Repeating the current track
You can repeat only the current track.
To cancel Shuffle Play
Press CONTINUE.
While the track you want is being played, press
REPEAT repeatedly until “REPEAT 1” appears in the
display.
You can start Shuffle Play while playing
Press SHUFFLE, and Shuffle Play starts from the current
track.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g CDs
2
3
Turn the JOG dial until the disc number you want
appears in the display.
You can directly select a disc for 1 DISC Shuffle Play
See “Selecting a disc directly using the remote” on page 10.
1
2
3
4
5
6
7
8
DISC
TRACK
STEP
You can go to the next disc during 1 DISC Shuffle Play
Press DISC SKIP +.
20 AL
1
PROGRAM
CD 1
Disc number
You can specify the next disc to play during 1 DISC
Shuffle Play
To program a whole disc, skip this step. Press
≠/± until the track number you want
appears in the display.
Turn the JOG dial to specify the next disc. After all the
tracks on the current disc are played in random order,
the next disc starts playing. If you want to skip to the
next disc right away, press ENTER while playing the
current disc.
1
2
3
4
5
6
7
8
DISC
TRACK
STEP
20 1
1
PROGRAM
CD 1
Note
Track number
You cannot specify the next disc to play during ALL DISCS
Shuffle Play.
4
Press ENTER or PROGRAM.
The track being programmed
Creating Your Own Program
(Program Play)
1
2
3
4
5
6
7
8
DISC
TRACK
STEP
20 1
1
PROGRAM
CD 1
You can arrange the order of the tracks and/ or discs to
create your own program and the program is stored
automatically. A program can contain up to 32 “steps”
— one “step” may contain a track or a whole disc.
You can make a program using the controls on the
remote as well as the ones on the player. However, the
programming procedures are different.
Playing order
The disc being
programmed
5
6
To program other discs/ tracks, do the following:
To program
Repeat Steps
2 and 4
All tracks of another disc(s)
Other tracks on the same disc
Other tracks on other discs
3 and 4
2 to 4
Creating a program on the player
PROGRAM
≠/±
JOG
ENTER
Press · to start Program Play.
To cancel Program Play
Press CONTINUE.
POWER
The program remains even after Program Play ends
When you press ·, you can play the same program
again.
·
CLEAR
CHECK
When you press PROGRAM during Continuous or
Shuffle Play
1
Press PROGRAM.
The program will be played after the current track.
If a program is already stored, the last step of the
program appears in the display. When you want to
erase the whole program, hold down CLEAR until
“All Clr” appears in the display (see page 14).
The program remains until you erase them
If you replace discs, the programmed disc and track
numbers remain. So, the player plays only the existing
disc and track numbers. However, the disc and track
numbers that are not found in the player or on the disc
are deleted from the program, and the rest of the
program is played in the programmed order.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g CDs
Creating a program using the remote
Checking the programmed order
You can check your program before or after you start
playing.
Press CHECK.
PROGRAM
Each time you press this button, the display shows the
disc and track number of each step in the programmed
order. (When a whole disc is programmed as one step,
“AL” appears instead of the track number.) After the
last step in the program, the display shows “End” and
returns to the original display.
TRACK
DISC
Number
buttons
ENTER
CLEAR
CHECK
Changing the programmed order
·
You can change your program before you start playing.
1
2
3
4
Press PROGRAM.
Press DISC.
To
You need to
Erase a track or disc
Press CHECK until the track or
disc you want to erase appears in
the display, then press CLEAR
Press the number button of the disc.
Erase the last track or
disc in the program
Press CLEAR. Each time you
press the button, the last track or
disc will be cleared.
To program a whole disc, skip this step and go to
Step 6. Press TRACK.
Add tracks or discs to the
end of the program
Follow the programming
procedure
5
Press the number button of the track.
Erase the whole program Hold down CLEAR until “All
completely
Clr” appears in the display to
erase the whole program, then
create a new program following
the programming procedure
6
7
Press ENTER.
To program other discs/ tracks, do the following:
To program
Repeat Steps
2, 3 and 6
4 to 6
All tracks of another disc(s)
Other tracks on the same disc
Other tracks on other discs
Erasing the program stored in memory
1
Press PROGRAM in the stop mode.
2 to 6
2
Hold down CLEAR until ”All Clr” appears in the
display.
8
Press · to start Program Play.
To cancel Program Play
Press CONTINUE.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g CDs
1
2
Insert discs into the slot of the block you want,
referring to the table. (See also “Inserting Discs” on
page 6.)
Playing Discs in a Group
(Block Play)
Press one of the BLOCK 1–8 buttons to select the
block.
When using the remote, press BLOCK, the number
button of the block you want, then ENTER.
The block number appears in the display.
You can classify discs in advance by artists, category,
etc. when inserting discs into the slots, and play them
only within the group (called “block”) you specified.
The player has eight blocks, and each slot is assigned to
one of the blocks as shown below.
3
Press ·.
Block number
Disc slot
1–25
Block Play starts from the disc which is the most
upward number within a block and located closest
to the playing position.
1
2
3
4
5
6
7
8
26–50
51–75
You can start Block Play from the disc you want
When you want to start Block Play from the disc you
want, turn the JOG dial to select the disc, then press
ENTER.
76–100
101–125
126–150
151–175
176–200
To cancel Block Play
Press the corresponding BLOCK 1–8 button.
You can enjoy Continuous, Shuffle or Repeat Play
within a certain block.
Note
The block number does not appear if no disc is put into the
block you specified.
POWER
BLOCK 1–8
·
BLOCK
ENTER
Number
buttons
·
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
On transportation
•
When transporting the player, press OPEN then remove all
Precautions
the discs from the player and turn the power off.
On safety
If you have any questions or problems concerning your
player, please consult your nearest Sony dealer.
•
Caution — The use of optical instruments with this product
will increase eye hazard.
•
Should any solid object or liquid fall into the cabinet,
unplug the player and have it checked by qualified
personnel before operating it any further.
Notes on CDs
On power sources
On handling CDs
•
Before operating the player, check that the operating
voltage of the player is identical with your local power
supply. The operating voltage is indicated on the nameplate
at the rear of the player.
•
To keep the disc clean, handle the disc carefully.
•
Do not stick paper or tape on the disc.
•
•
The player is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet, even if
the player itself has been turned off.
If you are not going to use the player for a long time, be
sure to disconnect the player from the wall outlet. To
disconnect the AC power cord (mains lead), grasp the plug
itself; never pull the cord.
•
•
Do not expose the disc to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in direct
sunlight as there can be considerable rise in temperature
inside the car.
•
AC power cord must be changed only at the qualified
service shop.
On placement
After removing a disc from the disc slot, store the disc in its
case.
•
•
•
Place the player in a location with adequate ventilation to
prevent heat build-up in the player.
Do not place the player on a soft surface such as a rug that
might block the ventilation holes on the bottom.
Do not place the player in a location near heat sources, or in
a place subject to direct sunlight, excessive dust or
mechanical shock.
On cleaning
•
Before playing, clean the disc with a cleaning cloth. Wipe
the disc from the center out.
On operation
•
If the player is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture may
condense on the lenses inside the player. Should this occur,
the player may not operate properly. In this case, leave the
player turned on for about an hour until the moisture
evaporates.
•
Do not use solvents such as benzine, thinner, commercially
available cleaners or anti-static spray intended for vinyl
LPs.
On adjusting volume
•
Do not turn up the volume while listening to a portion with
very low level inputs or no audio signals. If you do, the
speakers may be damaged when a peak level portion is
played.
On cleaning
•
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
Troubleshooting
Specifications
If you experience any of the following difficulties while
using the player, use this troubleshooting guide to help
you remedy the problem. Should any problem persist,
consult your nearest Sony dealer.
Compact disc player
Laser
Semiconductor laser (λ = 780 nm)
Emission duration: continuous
Laser output
Max 44.6 µW*
* This output is the value measured at
a distance of 200 mm from the
objective lens surface on the Optical
Pick-up block with 7 mm aperture.
There is no sound.
/Check that the player is connected securely.
/Make sure you operate the amplifier correctly.
Frequency response
Signal-to-noise ratio
Dynamic range
20 Hz to 20 kHz ± 0.5 dB
More than 100 dB
More than 98 dB
The CD does not play.
/There is no CD in a slot (“–no dISC–” appears).
Insert a CD.
/Insert the CD with the label side facing right.
/Clean the CD (see page 16).
/Moisture has condensed inside the player. Press
OPEN and leave the player turned on for about
an hour (see page 16).
Harmonic distortion
Channel separation
Less than 0.0045%
More than 95 dB
Outputs
Load impedance
Jack
type
Maximum
output
level
The remote does not function.
/Remove obstacles in the path of the remote and
the player.
/Point the remote at the remote sensor g on the
player.
Over 10 kilohms
Phono
jacks
2 V
LINE OUT
(at 50 kilohms)
/Replace all the batteries in the remote with new
ones if they are weak.
General
/Set the CD1/ 2/ 3 switch on the remote
according to the position of the COMMAND
MODE selector displayed in the front panel
display (see page 5).
Power requirements
Power consumption
120 V AC, 60 Hz
13 W
Dimensions (approx.)
(w/h/d)
When the front cover is closed
430 × 200 × 480 mm (17 × 7 7/ 8 × 19 in.)
incl. projecting parts
The player functions incorrectly.
When the front cover is open
430 × 200 × 600 mm (17 × 7 7/ 8 × 23 5/ 8
in.) incl. projecting parts
/The microcomputer chips may be operating
incorrectly. Disconnect the AC power cord, then
connect it back to the wall outlet to reset the
player.
Mass (approx.)
9.0 kg (19 lbs 14 oz)
Supplied accessories
Audio cord (2 phono plugs – 2 phono plugs) (1)
Remote commander (remote) (1)
Sony SUM-3 (NS) batteries (2)
CD booklet holders (2)
Label (1)
Design and specifications are subject to change without notice.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x
Names of controls
S
T
Index
Searching. See Locating
Selecting a disc 10
Shuffle Play
on all discs 12
on one disc 12
Bu t t o n s
BLOCK 15
BLOCK 1–8 15
CHECK 14
CLEAR 14
A
AMS 11
Specifying the next disc 10
Automatic Music Sensor 11.
CONTINUE
DISC 10
8
B
Troubleshooting 17
DISC SKIP
9
Block Play 15
ENTER
Number 11
OPEN
9
U, V, W, X, Y, Z
C, D
6
Unpacking
4
Connecting
Continuous Play
4
PROGRAM 13
REPEAT 12
SHUFFLE 12
TRACK 11
8
E, F, G
Erasing
programs 14
≠/± 11
·
P
p
9
9
9
H
I
0/) 11
Handling CDs 16
Hookups
overview
Sw it ch e s
4
CD1/ 2/ 3
POWER
5
6
Inserting CDs
6
Ja cks
CONTROL A1
LINE OUT
5
J, K
5
JOG dial
6
Ot h e rs
L, M, N O
COMMAND MODE selector
5
Locating
Disc slots
Display
Front cover
JOG dial 6, 8
Rotary table
6
a specific point 11
a specific track 11
by monitoring 11
by observing the display 11
directly 11
9
6
6
g
4
discs 10
using AMS 11
P, Q
Playback
Block Play 15
Continuous Play
Program Play 13
Repeat Play 12
Shuffle Play 12
8
Program
changing 14
checking 14
erasing 14
R
Remote control
Repeating 12
4
Rotary table
6
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|