Sony Stereo Receiver STR DH510 User Manual

4-168-043-12(1)  
Multi Channel AV  
Receiver  
Operating Instructions  
STR-DH510  
©2010 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12)Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to  
avoid injury from tip-over.  
CAUTION  
You are cautioned that any changes or modifications  
not expressly approved in this manual could void  
your authority to operate this equipment.  
To reduce the risk of electric shock, the speaker cord  
should be connected to the apparatus and the  
speakers in accordance with the following  
instructions.  
1) Disconnect the AC power cord from the MAINS.  
2) Strip 10 to 15 mm of the wire insulation of the  
speaker cord.  
3) Connect the speaker cord to the apparatus and  
the speakers carefully so as not to touch the core  
of speaker cord by hand. Also disconnect the AC  
power cord from the MAINS before  
disconnecting the speaker cord from the  
apparatus and the speakers.  
13)Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
14)Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has  
been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled  
or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture,  
does not operate normally, or has been dropped.  
For customers in Europe  
The following FCC statement  
applies only to the version of  
this model manufactured for  
sale in the U.S.A. Other  
Disposal of Old Electrical &  
Electronic Equipment  
(Applicable in the European  
Union and other European  
countries with separate  
collection systems)  
versions may not comply with  
FCC technical regulations.  
NOTE:  
This symbol on the product or on its packaging  
indicates that this product shall not be treated as  
household waste. Instead it shall be handed over to  
the applicable collection point for the recycling of  
electrical and electronic equipment. By ensuring this  
product is disposed of correctly, you will help  
prevent potential negative consequences for the  
environment and human health, which could  
otherwise be caused by inappropriate waste  
handling of this product. The recycling of materials  
will help to conserve natural resources. For more  
detailed information about recycling of this product,  
please contact your local Civic Office, your  
household waste disposal service or the shop where  
you purchased the product.  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However,  
there is no guarantee that interference will not occur  
in a particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the  
following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment  
and receiver.  
– Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
– Consult the dealer or an experienced radio/TV  
technician for help.  
continued  
3GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disposal of waste batteries  
(applicable in the European  
For customers in Australia  
Disposal of Old Electrical &  
Electronic Equipment  
Union and other European  
countries with separate  
collection systems)  
This symbol on the battery or on the packaging  
indicates that the battery provided with this product  
shall not be treated as household waste.  
(Applicable in the European  
Union and other European  
countries with separate  
collection systems)  
On certain batteries this symbol might be used in  
combination with a chemical symbol. The chemical  
symbols for mercury (Hg) or lead (Pb) are added if  
the battery contains more than 0.0005% mercury or  
0.004% lead.  
By ensuring these batteries are disposed of correctly,  
you will help prevent potentially negative  
consequences for the environment and human health  
which could otherwise be caused by inappropriate  
waste handling of the battery. The recycling of the  
materials will help to conserve natural resources.  
In case of products that for safety, performance or  
data integrity reasons require a permanent  
connection with an incorporated battery, this battery  
should be replaced by qualified service staff only.  
To ensure that the battery will be treated properly,  
hand over the product at end-of-life to the applicable  
collection point for the recycling of electrical and  
electronic equipment.  
For all other batteries, please view the section on  
how to remove the battery from the product safely.  
Hand the battery over to the applicable collection  
point for the recycling of waste batteries.  
For more detailed information about recycling of  
this product or battery, please contact your local  
Civic Office, your household waste disposal service  
or the shop where you purchased the product.  
Notice for customers: The following  
information is only applicable to  
equipment sold in countries applying  
EU Directives.  
The manufacturer of this product is Sony  
Corporation, 1-7-1 Konan Minato-ku Tokyo,  
108-0075 Japan. The Authorized Representative for  
EMC and product safety is Sony Deutschland  
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,  
Germany. For any service or guarantee matters  
please refer to the addresses given in separate  
service or guarantee documents.  
4GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On Copyrights  
This receiver incorporates Dolby* Digital and Pro  
Logic Surround and the DTS** Digital Surround  
System.  
About This Manual  
• The instructions in this manual are for model  
STR-DH510. Check your model number by  
looking at the lower right corner of the front panel.  
• In this manual, models of area code ECE is used  
for illustration purposes unless stated otherwise.  
Any difference in operation is clearly indicated in  
the text, for example, “Models of area code ECE  
only”.  
• The instructions in this manual describe the  
controls on the supplied remote. You can also use  
the controls on the receiver if they have the same  
or similar names as those on the remote.  
*
Manufactured under license from Dolby  
Laboratories. Dolby, Pro Logic, and the double-  
D symbol are trademarks of Dolby Laboratories.  
** Manufactured under license under U.S. Patent  
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;  
6,487,535 & other U.S. and worldwide patents  
issued & pending. DTS and DTS Digital  
Surround are registered trademarks and the DTS  
logos and Symbol are trademarks of DTS, Inc.  
© 1996-2008 DTS, Inc. All Rights Reserved.  
About area codes  
This receiver incorporates High-Definition  
Multimedia Interface (HDMITM) technology.  
HDMI, the HDMI Logo, and High-Definition  
Multimedia Interface are trademarks or registered  
trademarks of HDMI Licensing LLC in the United  
States and other countries.  
The area code of the receiver you purchased is  
shown on the lower right portion of the rear panel  
(see the illustration below).  
FRONT  
“x.v.Colour (x.v.Color)” and “x.v.Colour  
(x.v.Color)” logo are trademarks of Sony  
Corporation.  
L
CENTER SURROUND  
R
L
R
SPEAKERS  
4-XXX-XXX-XX (X) AA  
Area code  
“BRAVIA” is a trademark of Sony Corporation.  
Any differences in operation, according to the area  
code, are clearly indicated in the text, for example,  
“Models of area code AA only”.  
“PLAYSTATION” is a trademark of Sony  
Computer Entertainment Inc.  
5GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Table of Contents  
Enjoying the surround effect at low  
volume levels (NIGHT MODE) ............ 46  
Resetting sound fields to the initial  
6: Connecting the AC power cord  
settings ................................................... 46  
Playing back components with one-touch  
operation (One-Touch Play)................... 48  
Enjoying the TV sound from the speakers  
(mains lead) ............................................29  
Calibrating the appropriate speaker  
(System Audio Control)......................... 49  
Turning off the receiver with the TV  
(System Power Off) ............................... 50  
Enjoying movies with the optimum sound  
field (Theater/Theatre Mode Sync)........ 51  
Enjoying the TV sound via an HDMI  
cable (Audio Return Channel) ............... 51  
(AUTO CALIBRATION).......................30  
(Models of area code ECE, CEK, AU1  
only)  
Adjusting the speaker levels  
(TEST TONE) ........................................34  
Switching between digital and analog  
audio (INPUT MODE) .......................... 52  
Enjoying sound/images from the  
MEDIA PORT ....................................... 55  
(Models of area code ECE, CEK, AU1  
only)  
6GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clearing all the contents of the remote’s  
memory .................................................. 67  
Supplied accessories  
• Operating Instructions (this manual)  
• Quick Setup Guide  
• FM wire antenna (aerial) (1)  
• AM loop antenna (aerial) (1)  
• Remote commander (1)  
– RM-AAU071 (Models of area code U2,  
CA2 only)  
– RM-AAU074 (Models of area code ECE,  
CEK, AU1 only)  
• R6 (size-AA) batteries (2)  
• Optimizer microphone (ECM-AC2)  
(Models of area code ECE, CEK, AU1 only)  
(1)  
7GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Description and location of parts  
Front panel  
1
2
3
4
5
MASTER VOLUME  
?/1  
INPUT SELECTOR  
MEMORY/  
ENTER  
2CH/  
A.DIRECT  
DISPLAY  
DIMMER  
MUTING  
INPUT MODE  
TUNING MODE  
TUNING  
A.F.D.  
MOVIE  
MUSIC  
PHONES  
qs  
qa  
q;  
9
8
7
6
A ?/1 (on/standby) (page 30, 39, 46, 67)  
B INPUT SELECTOR (page 35)  
D Remote sensor  
Receives signals from remote commander.  
E MASTER VOLUME (page 34, 35)  
H DISPLAY (page 36)  
I 2CH/A.DIRECT, A.F.D., MOVIE, MUSIC  
J TUNING MODE, TUNING +/–, MEMORY/  
K INPUT MODE (page 52)  
L PHONES jack (page 71)  
8GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Indicators on the display  
1
2
3
4
5
6
LFE  
COAX  
HDMI  
OPT  
DTS  
PL II  
D
SW  
LPCM  
SLEEP  
D.RANGE  
L
C
S
R
ST  
RDS  
SL  
SR  
q;  
9
8
7
Indicator and explanation  
Indicator and explanation  
A Playback channel indicators  
C Input indicators  
The letters (L, C, R, etc.) indicate the channels  
being played back. The boxes around the letters  
vary to show how the receiver downmixes or  
upmixes the source sound (based on the speaker  
settings).  
Light up to indicate the current input.  
HDMI  
Lights up when  
– INPUT MODE is set to AUTO and the  
receiver recognizes a component connected  
via an HDMI IN jack (page 23, 52).  
– TV input detected Audio Return Channel  
(ARC) signals (page 51).  
SW  
L
Subwoofer  
Front Left  
Front Right  
Center (monaural)  
Surround Left  
R
C
COAX  
SL  
SR  
S
Lights up when input mode is set to “AUTO” or  
“COAX” and the source signals is a digital  
signal being input through the COAXIAL jack  
Surround Right  
Surround (monaural or the  
surround components  
obtained by Pro Logic  
processing)  
OPT  
Lights up when input mode is set to “AUTO” or  
“OPT” and the source signals is a digital signal  
being input through the OPTICAL jack (page  
Example:  
Speaker pattern: 3/0.1  
Recording format: 3/2.1  
Sound Field: A.F.D. AUTO  
D DTS  
LFE  
SW  
Lights up when the receiver is decoding DTS  
signals.  
L
C
R
SL  
SR  
Note  
When playing a DTS format disc, be sure that  
you have made digital connections and that  
INPUT MODE is set to “AUTO” (page 52).  
B
LFE  
Lights up when the disc being played back  
contains an LFE (Low Frequency Effect)  
channel and the LFE channel signal is actually  
being reproduced.  
E Dolby Pro Logic indicators  
Lights up one of the respective indicators when  
the receiver performs Dolby Pro Logic  
processing. This matrix surround decoding  
technology can enhance input signals.  
PL  
PL II  
Dolby Pro Logic  
Dolby Pro Logic II  
Note  
These indicators do not light up when the center  
speaker and surround speaker is not selected.  
continued  
9GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Indicator and explanation  
F SLEEP  
Lights up when the sleep timer is activated (page  
37, 65).  
G D.RANGE  
Lights up when dynamic range compression is  
activated (page 59).  
H Tuning indicators  
Lights up when the receiver tunes in radio  
stations.  
ST  
Stereo broadcast  
RDS (Models of area code ECE, CEK,  
AU1 only)  
A station that provides RDS services is tuned in.  
Preset station number  
Note  
The preset station number will change  
according to the preset station you select.  
For details on presetting radio stations, see page  
I
D
Lights up when the receiver is decoding Dolby  
Digital signals.  
Note  
When playing a Dolby Digital format disc, be  
sure that you have made digital connections and  
that INPUT MODE is not set to “ANALOG”  
J LPCM  
Lights up when Linear PCM signals are  
detected.  
10GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear panel  
1
3
2
1, 2  
AM  
HDMI  
DVD IN  
BD IN  
SAT/CATV IN  
TV OUT  
ARC  
ANTENNA  
IN  
Y
TV  
P
B/  
OPTICAL  
C
B
VIDEO  
IN  
VIDEO  
IN  
VIDEO  
OUT  
VIDEO  
IN  
VIDEO  
OUT  
SAT/  
CATV  
IN  
P
R/  
C
R
FRONT  
OPTICAL  
SAT/CATV IN  
DVD IN  
MONITOR  
OUT  
L
DVD  
IN  
CENTER SURROUND  
DVD  
MONITOR  
COMPONENT VIDEO  
R
L
COAXIAL  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
OUT  
AUDIO  
IN  
AUDIO  
OUT  
(ASSIGNABLE)  
DIGITAL  
L
R
R
DC5V  
0.7A MAX  
SA-CD/  
CD  
TV  
SAT/  
CATV  
VIDEO  
SUBWOOFER  
SPEAKERS  
AUTO CAL  
MIC  
DMPORT  
6
5
1
4
A Audio signal section  
B Video signal section*  
The image quality depends on the connecting  
jack.  
DIGITAL INPUT/OUTPUT jacks (page 20,  
DIGITAL INPUT/OUTPUT  
HDMI IN/OUT  
OPTICAL IN  
COAXIAL IN  
HDMI IN/OUT  
COMPONENT VIDEO  
INPUT/OUTPUT jacks (page  
ANALOG INPUT/OUTPUT jacks (page 19,  
High  
quality  
image  
Green  
(Y)  
Y, PB/CB, PR/CR  
IN/OUT  
Blue  
(PB/CB  
White (L)  
AUDIO  
)
IN/OUT  
Red  
(PR/CR  
Red (R)  
)
COMPOSITE VIDEO INPUT/  
AUDIO OUT  
Black  
VIDEO IN/OUT  
Yellow  
continued  
11GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote commander  
FM ANTENNA jack  
You can use the supplied remote to operate the  
receiver and to control the Sony audio/video  
components that the remote is assigned to  
operate.  
AM ANTENNA terminals  
RM-AAU071 (Models of area  
code U2, CA2 only)  
RM-AAU074 (Models of area  
code ECE, CEK, AU1 only)  
wk  
wj  
1
2
E AUTO CAL MIC section (page 31)  
(Models of area code ECE, CEK,  
AU1 only)  
SAT/  
BD  
TV  
DVD  
CATV  
3
4
SA-CD/  
CD  
VIDEO  
TUNER  
AUTO CAL MIC jack  
DMPORT  
wh  
wg  
5
6
7
8
9
wf  
wd  
DMPORT jack  
0
qa  
* You can watch the selected input image when you  
connect the HDMI TV OUT or MONITOR OUT  
jack to a TV (page 20, 23).  
ws  
wa  
qs  
qd  
qf  
O
MENU  
m
M
qg  
x
X
>
.
w;  
ql  
qh  
qj  
qk  
12GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TV (R) button  
Using the SHIFT (Q) and TV  
Press and hold TV (R), then press the button  
with yellow printing to control the TV.  
Example: Press and hold TV (R), then press  
TV CH + (RM-AAU071 only) or PROG +  
(RM-AAU074 only) (P).  
(R) button  
SHIFT (Q) button  
Press and hold SHIFT (Q), then press the  
button with pink printing that you want to use.  
Example: Press and hold SHIFT (Q), then  
press ENTER (E).  
x
X
>
.
TV CH/PROG  
DMPORT  
TUNER  
ENTER  
TV  
O
To control the receiver  
MENU  
Name and function  
B ?/1b) (on/standby)  
m
M
x
X
>
.
Turns the receiver on or sets it to standby mode.  
Saving the power in standby mode  
When “CTRL.HDMI” is set to “CTRL OFF”  
C Input buttons (VIDEOa))  
SHIFT  
Selects the component you want to use. When  
you press any of the input buttons, the receiver  
turns on. The buttons are initial assigned to  
control Sony components.  
D Numeric buttonsc) (number 5a))  
Presets or tunes to preset stations.  
E ENTERc)  
Enters the selection.  
F MEMORY  
Stores a station.  
G D.TUNING  
Enters direct tuning mode.  
I DISPLAY  
Views information on the display.  
K AMP MENU  
Displays the menu to operate the receiver.  
L
V/v/B/b  
,
Press V/v/B /b to select the settings, then press  
to enter the selection.  
continued  
13GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To control a Sony TV  
Press and hold TV (R) and then press the  
yellow printing button to select the function  
you want.  
Name and function  
N MENU/HOMEd)  
Displays the menu to operate the receiver.  
O TUNING +/–  
Scans a station.  
Name and function  
PRESET +/–  
Selects preset stations.  
P SOUND FIELD +a)/–  
A TV ?/1 (on/standby)  
Turns on or off the TV.  
D Numeric buttons (number 5a))  
Selects a sound field (page 42).  
Selects the TV channels.  
S MUTING (RM-AAU071 only)  
(RM-AAU074 only)  
E ENTER (RM-AAU071 only)  
Enters the selections.  
Turns off the sound temporarily.  
(Previous channel) (RM-AAU074  
only)  
Returns to the previous channel watched (for  
Press MUTING/  
again to restore the sound.  
T MASTER VOL +/– (RM-AAU071 only)  
+/– (RM-AAU074 only)  
more than five seconds).  
Adjust the volume level of all speakers at the  
same time.  
I DISPLAY (RM-AAU071 only)  
Displays the information of TV.  
U RETURN/EXIT O  
/
(Info/Text reveal) (RM-AAU074  
Returns to the previous menu.  
only)  
a)The following buttons have tactile dots:  
– RM-AAU071: 5/VIDEO, AUDIO, N and  
TV CH +/SOUND FIELD +  
In digital mode: Displays brief details of the  
program currently being watched.  
In analog mode: Displays information such as  
current channel number and screen format.  
In text mode: Reveals hidden information (e.g.  
answers to a quiz).  
– RM-AAU074: 5/VIDEO,  
, N and  
PROG +/SOUND FIELD +/c  
Use the tactile dots as references when operating  
the receiver.  
J Color buttons  
Displays an operation guide on the TV screen  
when the color buttons are available. Follow the  
operation guide to perform a selected operation.  
b)If you press AV ?/1 (A) and ?/1 (B)  
simultaneously, the receiver and connected  
components will turn off (SYSTEM STANDBY).  
c)Press and hold SHIFT (Q) then press this button.  
d)Press AMP MENU (K) to activate this button.  
M TOOLS/OPTIONS  
Displays the TV options.  
N MENU/HOME  
Displays the TV menus.  
P TV CH +a)/– (RM-AAU071 only)  
Selects the next (+) or previous (–) channel.  
PROG +a)/–, ca)/C (RM-AAU074 only)  
In TV mode: Selects the next (+) or previous  
(–) channel.  
In text mode: Selects the next (c) or previous  
(C) channel.  
S MUTING (RM-AAU071 only)  
(RM-AAU074 only)  
Activates the TV’s muting function.  
T TV VOL +/– (RM-AAU071 only)  
(RM-AAU074 only)  
Adjust the volume.  
U RETURN/EXIT O  
Returns to the previous TV menu.  
14GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Name and function  
V GUIDE (RM-AAU071 only)  
(RM-AAU074 only)  
Displays the guide when you are watching  
analog or digital channel.  
W AUDIOa) (RM-AAU071 only)  
a) (RM-AAU074 only)  
Selects the desired audio signal.  
Y DIGITAL (RM-AAU074 only)  
Changes to digital mode.  
ANALOG (RM-AAU074 only)  
Changes to analog mode.  
Z / (Text) (RM-AAU074 only)  
Displays text.  
wj THEATER (RM-AAU071 only)  
THEATRE (RM-AAU074 only)  
Sets the optimal picture settings automatically  
for watching movies when you connect a Sony  
TV that is compatible with the THEATER/  
THEATRE button function (page 51).  
wk INPUT (RM-AAU071 only)  
Selects the input signal (TV or video).  
/
(Input select/Text hold)  
(RM-AAU074 only)  
In TV mode: Selects the input signal (TV or  
video).  
In analog text mode: Holds the current page.  
a)The following buttons have tactile dots:  
– RM-AAU071: 5/VIDEO, AUDIO, N and  
TV CH +/SOUND FIELD +  
– RM-AAU074: 5/VIDEO,  
, N and  
PROG +/SOUND FIELD +/c  
Use the tactile dots as references when operating  
the receiver.  
continued  
15GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To control other Sony components  
Blu-ray disc,  
DVD player  
Satellite tuner,  
Cable TV tuner  
VCR  
CD player  
Name  
b)  
A
D
AV ?/1  
Power  
Track  
Power  
Power  
Power  
Track  
c)  
Numeric buttons  
(number 5 )  
Channel  
Channel  
a)  
c)  
d)  
E
H
ENTER  
Enter  
Enter  
Enter  
Enter  
d)  
ANGLE  
Select angle  
e)  
I
J
L
DISPLAY  
Display  
Menu, guide  
Enter  
Display  
Display  
Display  
e)  
Color buttons  
Menu, guide  
Enter  
Enter  
Select  
V/v/B/b  
Select  
Select  
M
N
TOOLS/OPTIONS  
Options  
menu  
Options  
d)  
menu  
MENU/HOME  
Menu  
Menu  
Menu  
f)  
O m/M  
Search forward,  
backward  
Fast forward,  
rewind  
Fast forward,  
rewind  
a)f)  
N
Play  
Play  
Play  
f)  
./>  
Skip track  
Pause  
Skip track  
Pause  
Stop  
Skip track  
Pause  
Stop  
f)  
X
f)  
x
Stop  
U
V
W
X
Y
RETURN/EXIT O  
Exit menu  
Exit menu,  
Live TV  
d)  
d)  
GUIDE  
Program  
schedule  
Display  
guide menu  
e)  
a)d)  
AUDIO  
Select audio  
e)  
d)  
SUBTITLE  
Select subtitle  
e)  
TOP MENU  
On-screen guide  
Menu  
POP UP/MENU  
c)  
Z
CLEAR  
Clear  
Clear  
a)The following buttons have tactile dots:  
– RM-AAU071: 5/VIDEO, AUDIO, N and  
TV CH +/SOUND FIELD +  
d)RM-AAU071 only.  
e)RM-AAU074 only.  
f) This button is also available for DIGITAL MEDIA  
PORT adapter operation. For details on the  
function of the button, refer to the operating  
instructions supplied with the DIGITAL MEDIA  
PORT adapter.  
– RM-AAU074: 5/VIDEO,  
, N and  
PROG +/SOUND FIELD +/c  
Use the tactile dots as references when operating  
the receiver.  
b)If you press AV ?/1 (A) and ?/1 (B)  
simultaneously, the receiver and connected  
components will turn off (SYSTEM STANDBY).  
The function of the AV ?/1 (A) changes  
automatically each time you press the input  
buttons (C).  
Notes  
• Some functions explained in this section may not  
work depending on the model.  
• The above explanation is intended to serve as an  
example only. Therefore, depending on the  
component, the above operation may not be  
possible or may operate differently than described.  
c)Press and hold SHIFT (Q) then press this button.  
16GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Inserting batteries into the  
remote  
Connections  
Insert two R6 (size-AA) batteries in the  
RM-AAU071 (Models of area code U2, CA2  
only) or RM-AAU074 (Models of area code  
ECE, CEK, AU1 only) Remote Commander.  
Observe the correct polarity when installing  
batteries.  
1: Installing the speakers  
This receiver allows you to use a 5.1 channel  
system (5 speakers and one subwoofer).  
To fully enjoy theater-like multi channel  
surround sound requires five speakers (two  
front speakers, a center speaker, and two  
surround speakers) and a subwoofer (5.1  
channel).  
Example of a 5.1 channel  
speaker system configuration  
Notes  
• Do not leave the remote in an extremely hot or  
humid place.  
• Do not use a new battery with old ones.  
• Do not mix manganese batteries and other kinds of  
batteries.  
• Do not expose the remote sensor to direct sunlight  
or lighting apparatuses. Doing so may cause a  
malfunction.  
• If you do not intend to use the remote for an  
extended period of time, remove the batteries to  
avoid possible damage from battery leakage and  
corrosion.  
• When you replace the batteries, the remote buttons  
may be reset to their initial settings. If this happens,  
reassign the buttons again (page 66).  
• When the remote no longer operates the receiver,  
replace all the batteries with new ones.  
AFront speaker (Left)  
BFront speaker (Right)  
CCenter speaker  
DSurround speaker (Left)  
ESurround speaker (Right)  
FSubwoofer  
continued  
17GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Note  
Tips  
To enjoy better surround sound, the distance  
between the center speaker and the listening position  
B cannot be more than 1.5 meters (5 feet) closer  
than the one between the listening position and the  
front speaker A. Place the speakers so that the  
difference in the length of B in the following  
diagram is no more than 1.5 meters (5 feet) closer  
than the length of A.  
• The angle A should be the same.  
A
A
30˚ 30˚  
100˚-120˚  
100˚-120˚  
Example: Adjust the distance B to 4.5 meters  
(15 feet) or more when the distance A is 6 meters  
(20 feet).  
Also, the distance between the surround speakers  
and the listening position C cannot be more than  
4.5 meters (15 feet) closer than the distance between  
the listening position and the front speakers A.  
Place the speakers so that the difference in the length  
of C in the above diagram is no more than  
4.5 meters (15 feet) closer than the length of A.  
Example: Adjust the distance C to 1.5 meters  
(5 feet) or more when the distance A is 6 meters  
(20 feet).  
• Since the subwoofer does not emit highly  
directional signals, you can place it wherever you  
want.  
This is important because incorrect speaker  
placement is not conductive to the enjoyment of  
surround sound. Please note that placing the  
speakers closer than the required will cause a delay  
in the output of the sound from that speaker. In other  
words, the speaker will sound like it is farther away.  
Adjusting these parameter while listening to the  
sound often results in much better surround sound.  
18GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2: Connecting the speakers  
Before connecting the cords, be sure to disconnect the AC power cord (mains lead).  
Center speaker  
Front speaker  
Left  
Right  
B
B
AM  
HDMI  
DVD IN  
BD IN  
SAT/CATV IN  
TV OUT  
ARC  
TENNA  
VIDEO  
IN  
VIDEO  
IN  
VIDEO  
OUT  
VIDEO  
IN  
VIDEO  
OUT  
FRONT  
DVD IN  
MONITOR  
OUT  
L
CENTER SURROUND  
DVD  
MONITOR  
NENT VIDEO  
AUDIO  
IN  
R
L
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
OUT  
AUDIO  
IN  
AUDIO  
OUT  
R
SA-CD/  
CD  
TV  
SAT/  
CATV  
VIDEO  
SUBWOOFER  
SPEAKERS  
10 mm  
A
B
(13/32 in.)  
Right  
Left  
Subwoofer*  
Surround speaker  
AMonaural audio cord (not supplied)  
BSpeaker cord (not supplied)  
* When you connect a subwoofer with an auto  
standby function, turn off the function when  
watching movies. If the auto standby function is  
set to on, it turns to standby mode automatically  
based on the level of the input signal to a  
subwoofer, then sound may not be output.  
Notes  
• Before connecting the AC power cord (mains  
lead), make sure that metalic wires of the speaker  
cords are not touching each other between the  
SPEAKERS terminals.  
• After you have install and connect your speaker, be  
sure to select the speaker pattern from SPEAKER  
19GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3: Connecting the TV  
Before connecting cords, be sure to disconnect the AC power cord (mains lead).  
TV  
Audio signals  
Video signals  
Audio/Video  
signals  
A
Ba)  
C
D
Ea)  
b)  
AM  
HDMI  
DVD IN  
BD IN  
SAT/CATV IN  
TV OUT  
ARC  
ANTENNA  
IN  
Y
TV  
P
B/  
OPTICAL  
C
B
VIDEO  
IN  
VIDEO  
IN  
VIDEO  
OUT  
VIDEO  
IN  
VIDEO  
OUT  
SAT/  
CATV  
IN  
P
R
/
C
R
FRONT  
OPTICAL  
SAT/CATV IN  
DVD IN  
MONITOR  
OUT  
L
DVD  
IN  
CENTER SURROUND  
DVD  
MONITOR  
COMPONENT VIDEO  
R
L
COAXIAL  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
OUT  
AUDIO  
IN  
AUDIO  
OUT  
(ASSIGNABLE)  
DIGITAL  
L
R
R
DC5V  
0.7A MAX  
SA-CD/  
CD  
TV  
SAT/  
CATV  
VIDEO  
SUBWOOFER  
SPEAKERS  
AUTO CAL  
MIC  
DMPORT  
a)To enjoy TV multi channel surround sound  
broadcasting from the speakers connected to the  
receiver, connect either B or E.  
Be sure to turn off the TV’s volume or activate the  
TV’s muting function.  
AAudio cord (not supplied)  
BOptical digital cord (not supplied)  
CComponent video cord (not supplied)  
DVideo cord (not supplied)  
EHDMI cable (not supplied)  
We recommend that you use a Sony HDMI  
cable.  
b)If your TV is compatible with the Audio Return  
Channel (ARC) function, the TV sound will output  
from the speakers connected to the receiver via  
HDMI TV OUT connection. In this case, set  
“ARC” to “ARC ON” in HDMI menu (page 51).  
Recommended connection  
Alternative connection  
20GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Notes  
• Be sure to turn on the receiver when the video and  
audio signals of a playback component are being  
output to a TV via the receiver. Unless the power is  
turned on, neither video nor audio signals will be  
transmitted.  
• Connect image display components such as a TV  
monitor or a projector to the HDMI TV OUT or  
MONITOR OUT jack on the receiver. You may  
not be able to record even if you connect recording  
components.  
• Depending on the status of the connection between  
the TV and the antenna (aerial), the image on the  
TV screen may be distorted. In this case, place the  
antenna (aerial) farther away from the receiver.  
• When connecting optical digital cords, insert the  
plugs straight in until they click into place.  
• Do not bend or tie optical digital cords.  
Tip  
All the digital audio jacks are compatible with  
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling  
frequencies.  
21GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on connecting DIGITAL  
MEDIA PORT adapter  
• Do not connect an adapter other than the  
DIGITAL MEDIA PORT adapter.  
• Do not connect or disconnect the DIGITAL  
MEDIA PORT adapter while the receiver is  
turned on.  
• When connecting the DIGITAL MEDIA  
PORT adapter, be sure the connector is  
inserted with the arrow mark facing towards  
the arrow mark on the DMPORT jack.  
• Be sure to make DMPORT connections  
firmly, insert the connector straight in.  
• As the connector of the DIGITAL MEDIA  
PORT adapter is fragile, be sure to handle  
with care when placing or moving the  
receiver.  
4a: Connecting the audio  
components  
The following illustration shows how to  
connect a Super Audio CD player, CD player  
and DIGITAL MEDIA PORT adapter. Before  
connecting cords, be sure to disconnect the AC  
power cord (mains lead).  
Super Audio  
CD player,  
CD player  
TV  
A
B
To detach the DIGITAL MEDIA  
PORT adapter from DMPORT  
jack  
AM  
HDMI  
DVD IN  
BD IN  
SAT/CATV IN  
ANTENNA  
IN  
Y
TV  
DC5V  
0.7A MAX  
2
P
B/  
OPTICAL  
C
B
VIDEO  
IN  
VIDEO  
IN  
VIDEO  
OUT  
VIDEO  
IN  
VIDEO  
OUT  
1
DMPORT  
SAT/  
CATV  
IN  
PR/  
C
R
OPTICAL  
SAT/CATV IN  
DVD IN  
MONITOR  
OUT  
DVD  
IN  
Press and hold both sides of the connector and  
then pull out the connector.  
DVD  
MONITOR  
COMPONENT VIDEO  
COAXIAL  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
OUT  
AUDIO  
IN  
AUDIO  
OUT  
(ASSIGNABLE)  
DIGITAL  
L
R
DC5V  
0.7A MAX  
SA-CD/CD  
TV  
SAT/  
CATV  
VIDEO  
SUBWOOFER  
AUTO CAL  
MIC  
DMPORT  
DIGITAL MEDIA  
PORT adapter  
AAudio cord (not supplied)  
BVideo cord (not supplied)  
22GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4b: Connecting the video components  
Notes  
Components to be connected  
• Before connecting cords (mains lead), be sure to  
disconnect the AC power cord.  
Connect your video components according to  
the table below.  
• It is not necessary to connect all the cords. Connect  
according to the availability of jacks on the  
connected components.  
• Be sure to turn on the receiver when the video and  
audio signals of a playback component are being  
output to a TV via the receiver. Unless the power is  
turned on, neither video nor audio signals will be  
transmitted.  
Component  
Page  
Blu-ray disc player*  
“PlayStation 3”*  
DVD player*  
• When connecting optical digital cords, insert the  
plugs straight in until they click into place.  
• Do not bend or tie optical digital cords.  
DVD recorder*  
Satellite tuner*, Cable TV tuner* 24, 27  
VCR 28  
Tip  
* We recommend that you connect your video  
components via HDMI connection if they have  
HDMI jacks.  
All the digital audio jacks are compatible with  
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling  
frequencies.  
You can watch the selected input image when  
you connect the HDMI TV OUT or  
Connecting components with  
HDMI jacks  
HDMI is the abbreviated name for High-  
Definition Multimedia Interface. It is an  
interface which transmits video and audio  
signals in digital format.  
If you want to connect several  
digital components, but cannot  
find an unused input  
HDMI features  
• A digital audio signals transmitted by HDMI  
can be output from the speakers connected to  
the receiver. This signal supports Dolby  
Digital, DTS, and Linear PCM.  
• This receiver can receive multi channel  
Linear PCM with a sampling frequency of  
192 kHz or less with an HDMI connection.  
• This receiver supports Deep Colour (Deep  
Color) and x.v.Colour (x.v.Color).  
• This receiver supports the Control for HDMI  
function. For details, see ““BRAVIA” Sync  
continued  
23GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DVD player, DVD recorder  
Blu-ray disc player, “PlayStation 3”  
Satellite tuner, Cable TV tuner  
Audio/video  
signals  
Audio/video  
signals  
Audio/video  
signals  
A
A
A
AM  
HDMI  
DVD IN  
BD IN  
SAT/CATV IN  
TV OUT  
ARC  
ANTENNA  
IN  
Y
TV  
P
B/  
OPTICAL  
C
B
VIDEO  
IN  
VIDEO  
IN  
VIDEO  
OUT  
VIDEO  
IN  
VIDEO  
OUT  
SAT/  
CATV  
IN  
P
R/  
C
R
FRONT  
OPTICAL  
SAT/CATV IN  
DVD IN  
MONITOR  
OUT  
L
DVD  
IN  
CENTER SURROUND  
DVD  
MONITOR  
COMPONENT VIDEO  
R
L
COAXIAL  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
OUT  
AUDIO  
IN  
AUDIO  
OUT  
(ASSIGNABLE)  
DIGITAL  
L
R
R
DC5V  
0.7A MAX  
SA-CD/CD  
TV  
SAT/  
CATV  
VIDEO  
SUBWOOFER  
SPEAKERS  
AUTO CAL  
MIC  
DMPORT  
A
Audio/video  
signals  
TV, etc.*  
AHDMI cable (not supplied)  
We recommend that you use a Sony HDMI cable.  
* See page 20 for the audio connection of the TV to  
the receiver.  
Notes  
• The initial setting for the DVD input button is as  
follows:  
– RM-AAU071: DVD player  
– RM-AAU074: DVD recorder  
Be sure to change the initial setting of the DVD  
input button on the remote so that you can use the  
button to control your DVD player/recorder.  
• You can also rename the DVD input so that it can  
be displayed on the receiver’s display. For details,  
24GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
• Audio signals (sampling frequency, bit  
length, etc.) transmitted from an HDMI jack  
may be suppressed by the connected  
component. Check the setup of the  
connected component if the image is poor or  
the sound does not come out of a component  
connected via the HDMI cable.  
• Sound may be interrupted when the  
sampling frequency, the number of channels  
or audio format of audio output signals from  
the playback component is switched.  
• When the connected component is not  
compatible with copyright protection  
technology (HDCP), the image and/or the  
sound from the HDMI TV OUT jack may be  
distorted or may not be output.  
Notes on connecting cables  
• Use a High Speed HDMI cable. If you use a  
Standard HDMI cable, 1080p or Deep  
Colour (Deep Color) images may not be  
displayed properly.  
• Sony recommends that you use an HDMI  
authorized cable or Sony HDMI cable.  
• We do not recommend using an HDMI-DVI  
conversion cable. When you connect an  
HDMI-DVI conversion cable to a DVI-D  
component, the sound and/or the image may  
not be output. Connect other audio cords or  
digital connecting cords, then set  
“A. ASSIGN” in AUDIO menu (page 63)  
when the sound is not output correctly.  
In this case, check the specification of the  
connected component.  
Notes on HDMI connections  
• An audio signal input to the HDMI IN jack  
is output from the SPEAKERS jacks and  
HDMI TV OUT jack. It is not output from  
any other audio jacks.  
• Video signals input to the HDMI IN jack can  
only be output from the HDMI TV OUT  
jack. The video input signals cannot be  
output from the VIDEO OUT jacks or  
MONITOR OUT jacks.  
• When you want to listen to the sound from  
the TV speaker, set “AUDIO.OUT” to  
“TV+AMP” in the HDMI menu (page 64). If  
you cannot play back multi channel  
software, set to “AMP”. However, the sound  
will not output from the TV speaker.  
• Be sure to turn on the receiver when video  
and audio signals of a playback component  
are being output to a TV through this  
receiver. If you set “PASS.TRHU” to  
“OFF”, video and audio signal will not be  
transmitted when the power is set to off.  
• DSD signals of Super Audio CD are not  
input and output.  
• The image resolution of player may need  
certain settings be made before you can  
enjoy multi channel Linear PCM. Refer to  
the operating instructions of the player.  
• Not every HDMI component supports all  
functions that are defined by the specified  
HDMI version. For example, components  
that support HDMI, version 1.4, may not  
support Audio Return Channel (ARC).  
• Refer to the operating instructions of each  
connected component for details.  
• The multi/stereo area audio signals of a  
Super Audio CD are not output.  
25GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a DVD player, DVD recorder  
The following illustration shows how to connect a DVD player or DVD recorder.  
DVD player, DVD recorder  
Audio signals  
Video signals  
A
B*  
C
D
AM  
HDMI  
DVD IN  
BD IN  
SAT/CATV IN  
TV OUT  
ARC  
ANTENNA  
IN  
Y
TV  
P
B/  
OPTICAL  
C
B
VIDEO  
IN  
VIDEO  
IN  
VIDEO  
OUT  
VIDEO  
IN  
VIDEO  
OUT  
SAT/  
CATV  
IN  
P
R/  
C
R
FRONT  
OPTICAL  
SAT/CATV IN  
DVD IN  
MONITOR  
OUT  
L
DVD  
IN  
CENTER SURROUND  
DVD  
MONITOR  
COMPONENT VIDEO  
R
L
COAXIAL  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
OUT  
AUDIO  
IN  
AUDIO  
OUT  
(ASSIGNABLE)  
DIGITAL  
L
R
R
DC5V  
0.7A MAX  
SA-CD/CD  
TV  
SAT/  
CATV  
VIDEO  
SUBWOOFER  
SPEAKERS  
AUTO CAL  
MIC  
DMPORT  
ACoaxial digital cord (not supplied)  
BOptical digital cord (not supplied)  
Recommended connection  
Alternative connection  
CComponent video cord (not supplied)  
DVideo cord (not supplied)  
* When you connect a component equipped with an  
OPTICAL jack, set “A. ASSIGN” in the AUDIO  
menu (page 63).  
Notes  
• The initial setting for the DVD input button is as  
follows:  
– RM-AAU071: DVD player  
• You can also rename the DVD input so that it can  
be displayed on the receiver’s display. For details,  
– RM-AAU074: DVD recorder  
Be sure to change the initial setting of the DVD  
input button on the remote so that you can use the  
button to control your DVD player or DVD  
recorder. For details, see “Changing the input  
• To input multi channel digital audio from the DVD  
player or DVD recorder, set the digital audio output  
setting on the DVD player or DVD recorder. Refer  
to the operating instructions supplied with the  
DVD player or DVD recorder.  
26GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting a Satellite tuner, Cable TV tuner  
The following illustration shows how to connect a Satellite tuner or Cable TV tuner.  
Satellite tuner, Cable TV tuner  
Audio signals  
Video signals  
A
B
C
D
AM  
HDMI  
DVD IN  
BD IN  
SAT/CATV IN  
TV OUT  
ARC  
ANTENNA  
IN  
Y
TV  
P
B/  
OPTICAL  
C
B
VIDEO  
IN  
VIDEO  
IN  
VIDEO  
OUT  
VIDEO  
IN  
VIDEO  
OUT  
SAT/  
CATV  
IN  
P
R/  
C
R
FRONT  
OPTICAL  
SAT/CATV IN  
DVD IN  
MONITOR  
OUT  
L
DVD  
IN  
CENTER SURROUND  
DVD  
MONITOR  
COMPONENT VIDEO  
R
L
COAXIAL  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
OUT  
AUDIO  
IN  
AUDIO  
OUT  
(ASSIGNABLE)  
DIGITAL  
L
R
R
DC5V  
0.7A MAX  
SA-CD/  
CD  
TV  
SAT/  
CATV  
VIDEO  
SUBWOOFER  
SPEAKERS  
AUTO CAL  
MIC  
DMPORT  
AAudio cord (not supplied)  
BOptical digital cord (not supplied)  
Recommended connection  
Alternative connection  
CComponent video cord (not supplied)  
DVideo cord (not supplied)  
27GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Notes  
Connecting components with  
analog video and audio jack  
• Be sure to change the initial setting of the VIDEO  
input button on the remote so that you can use the  
button to control your DVD recorder. For details,  
66).  
• You can also rename the VIDEO input so that it  
can be displayed on the receiver’s display. For  
The following illustration shows how to  
connect a component which has analog jacks  
such as a VCR, DVD recorder, etc.  
VCR, DVD recorder  
Audio signals  
Video signals  
A
B
AM  
HDMI  
DVD IN  
BD IN  
SAT/CATV IN  
TV OUT  
ARC  
ANTENNA  
IN  
Y
TV  
P
B/  
OPTICAL  
C
B
VIDEO  
IN  
VIDEO  
IN  
VIDEO  
OUT  
VIDEO  
IN  
VIDEO  
OUT  
SAT/  
CATV  
IN  
P
R/  
C
R
FRONT  
OPTICAL  
SAT/CATV IN  
DVD IN  
MONITOR  
OUT  
L
DVD  
IN  
CENTER SURROUND  
DVD  
MONITOR  
COMPONENT VIDEO  
R
L
COAXIAL  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
OUT  
AUDIO  
IN  
AUDIO  
OUT  
(ASSIGNABLE)  
DIGITAL  
L
R
R
DC5V  
0.7A MAX  
SA-CD/CD  
TV  
SAT/CATV  
VIDEO  
SUBWOOFER  
SPEAKERS  
AUTO CAL  
MIC  
DMPORT  
AVideo cord (not supplied)  
BAudio cord (not supplied)  
28GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5: Connecting the  
antennas (aerials)  
6: Connecting the AC  
power cord (mains lead)  
Connect the supplied AM loop antenna  
(aerial) and FM wire antenna (aerial).  
Connect the AC power cord (mains lead) to a  
wall outlet.  
Before connecting antennas (aerials), be sure  
to disconnect the AC power cord (mains lead).  
Notes  
• Before connecting the AC power cord (mains  
lead), make sure that metallic wires of the speaker  
cords are not touching each other between the  
SPEAKERS terminals.  
FM wire antenna (aerial) (supplied)  
AM loop antenna (aerial)  
(supplied)  
• Connect the AC power cord (mains lead) firmly.  
AC power cord (mains lead)  
AM  
DVD IN  
BD IN  
ANTENNA  
IN  
Y
TV  
P
B/  
OPTICAL  
C
B
VIDEO  
IN  
VIDEO  
IN  
VIDEO  
OUT  
VIDEO  
IN  
SAT/  
CATV  
IN  
FRONT  
P
R/  
L
C
R
SURROUND  
OPTICAL  
R
L
SAT/CATV IN  
DVD IN  
MONITOR  
OUT  
DVD  
IN  
COMPONENT VIDEO  
DVD  
COAXIAL  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
IN  
AUDIO  
OUT  
AUDIO  
IN  
R
(ASSIGNABLE)  
DIGITAL  
L
SPEAKERS  
R
DC5V  
0.7A MAX  
SA-CD/  
CD  
TV  
SAT/  
CATV  
VIDEO  
AUTO CAL  
MIC  
DMPORT  
To the wall outlet  
Notes  
• To prevent noise pickup, keep the AM loop  
antenna (aerial) away from the receiver and other  
components.  
• Be sure to fully extend the FM wire antenna  
(aerial).  
• After connecting the FM wire antenna (aerial),  
keep it as horizontal as possible.  
29GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Calibrating the  
Preparing the Receiver  
appropriate speaker  
settings automatically  
(AUTO CALIBRATION)  
Initializing the receiver  
Before using the receiver for the first time,  
initialize the receiver by performing the  
following procedure. This procedure can also  
be used to return settings you have made to  
their initial settings.  
(Models of area code ECE, CEK,  
AU1 only)  
This receiver is equipped with DCAC (Digital  
Cinema Auto Calibration) Technology which  
allows you to perform automatic calibration as  
follows:  
Be sure to use the buttons on the receiver for  
this operation.  
?/1  
• Check the connection between each speaker  
and the receiver.  
?/1  
• Adjust the speaker level.  
• Measure the distance of each speaker from  
your listening position.  
The DCAC is designed to obtain proper sound  
balance in your room. However, you can  
adjust the speaker levels manually according  
1 Press ?/1 to turn off the  
receiver.  
2 Hold down ?/1 for 5 seconds.  
After “CLEARING” appears on the  
display for a while, “CLEARED”  
appears.  
Before you perform Auto  
Calibration  
All the settings you have changed or  
adjusted are reset to the initial settings.  
Before you perform Auto Calibration, check  
the following items:  
• set up and connect the speakers (page 17,  
19).  
• connect only the supplied optimizer  
microphone to the AUTO CAL MIC jack.  
Do not connect other microphones to this  
jack.  
• turn off the muting function.  
• disconnect the headphones.  
• remove any obstacles in the path between  
the optimizer microphone and the speakers  
to avoid measurement errors.  
• make sure the environment is quiet to avoid  
the effect of noise and get a more accurate  
measurement.  
30GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Note  
Performing Auto Calibration  
During the calibration, the sound that comes out of  
the speakers is very loud. The volume of the sound  
cannot be adjusted. Pay attention to the presence of  
children or to the effect on your neighborhood.  
?/1  
Tip  
SAT/  
BD  
TV  
DVD  
CATV  
When you face the speaker towards the optimizer  
microphone, you will get a more accurate  
measurement.  
Input  
buttons  
SA-CD/  
CD  
VIDEO  
TUNER  
DMPORT  
Setting up the Auto Calibration  
HDMI  
T
NTEN
Optimizer microphone  
IN  
Y
TV  
P
B/  
PTA
C
B
VIDEO  
IN  
VIDEO  
IN  
VIDEO  
OUT  
VIDEO  
IN  
VIDEO  
OUT  
SAT/  
CATV  
IN  
P
R/  
C
R
OPTICAL  
FRONT  
S
A
T
/
C
A
T
V
I
N
D
V
D
I
N
MONITOR  
OUT  
L
DVD  
IN  
C
E
N
T
E
R
S
U
R
R
O
U
N
D
COMPONENT VIDEO  
DVD  
MONITOR  
R
L
COAXIAL  
AUDIO  
IN  
AUDIO  
AUDIO  
IN  
AUDIO  
OUT  
AUDIO  
IN  
AUDIO  
OUT  
IN  
DIGITAL (ASSIGNABLE)  
L
R
R
DC5V  
0
.
7
A
M
A
X
SA-CD  
/
CD  
TV  
SAT  
/
CATV  
DEO  
SUBWOOFER  
SPEAKERS  
AUTO CAL  
MIC  
DMPORT  
AMP  
MENU  
,
V/v/B/b  
AUTO CAL  
MIC  
O
MENU  
m
M
x
X
>
.
MASTER  
VOL +/–/  
2 +/–  
MUTING/  
1 Press AMP MENU.  
2 Press V/v repeatedly to select  
1 Connect the supplied optimizer  
microphone to the AUTO CAL  
MIC jack.  
“A. CAL”, then press or b.  
“START” appears on the display.  
3 Press  
.
2 Set up the optimizer  
Measurement starts in 5 seconds.  
A countdown is displayed.  
microphone.  
Place the optimizer microphone at your  
listening position. Use a stool or tripod so  
that the optimizer microphone remains at  
the same height as your ears.  
The measurement process will take  
approximately a few minutes to complete.  
continued  
31GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
The table below shows the display when  
measurement starts.  
Notes  
• Auto Calibration cannot detect the subwoofer.  
Therefore, all subwoofer settings will be  
maintained.  
Measurement for Display  
• If you have reposition your speaker, we  
recommend that you perform Auto Calibration  
again to enjoy the surround sound.  
Environment noise NOISE.CHK  
level  
Speaker connection MEASURE and SP  
DET. appears  
alternately*  
Error and warning codes  
Speaker level  
MEASURE and GAIN  
appears alternately*  
When error codes appear  
When an error is detected during Auto  
Calibration, an error code will appear on the  
display cyclically after each measurement  
process as follows:  
Speaker distance  
MEASURE and  
DISTANCE appears  
alternately*  
* The corresponding speaker indicator lights  
up in the display during measurement.  
Error code tblank display t(error code t  
a)  
blank display) t PUSH t blank display  
t ENTER  
When measurement ends, “COMPLETE”  
appears on the display and the settings are  
registered.  
a)Appears when there are more than one error code.  
Tips  
• Operations other than turning the receiver on or off  
are deactivated during the measurement.  
• The measurements may not be performed correctly  
or Auto Calibration cannot be performed when  
special speakers, such as dipole speakers are used.  
To rectify the error  
1 Record down the error code.  
2 Press  
.
3 Press ?/1 to turn off the receiver.  
4 Rectify the error.  
For details, see “Error codes and remedies”  
below.  
5 Turn on the receiver and perform Auto  
Calibration again (page 31).  
To cancel Auto Calibration  
The Auto Calibration function will be  
canceled when you do the following during  
the measurement process:  
– Press ?/1  
– Press MUTING (RM-AAU071 only) or  
(RM-AAU074 only)  
– Press the input buttons or turn INPUT  
SELECTOR on the receiver.  
– Change the volume level.  
– Connect the headphones.  
After you have finished  
Disconnect the optimizer microphone from the  
AUTO CAL MIC jack.  
32GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Error codes and remedies  
Warning codes and solutions  
Warning Explanation and solution  
code  
Error  
code  
Cause and remedy  
WARN. 40 The environment is noisy. Make sure  
the environment is quiet during Auto  
Calibration.  
ERROR 10 The environment is too noisy. Make  
sure the environment is quiet during  
Auto Calibration.  
WARN. 60 The front speaker level is out of range.  
Reposition your front speakers.c)  
ERROR 11 The speakers are placed too near the  
optimizer microphone. Place your  
speakers further away from the  
WARN. 62 The center speaker level is out of  
range. Reposition your center  
speaker.c)  
optimizer microphone.  
ERROR 12 None of the speakers are detected.  
Make sure that the optimizer  
WARN. 63 The surround left speaker level is out  
of range. Reposition your surround left  
speaker.c)  
microphone is connected properly and  
perform Auto Calibration again.  
ERROR 20 Front speakers are not detected or only  
one front speaker is detected. Check  
the front speakers connection.  
WARN. 64 The surround right speaker level is out  
of range. Reposition your surround  
right speaker.c)  
ERROR 21 Only one surround speaker is  
detected. Check the surround speakers  
connection.  
WARN. 70 The front speaker distance is out of  
range. Reposition your front  
speakers.c)  
WARN. 72 The center speaker distance is out of  
range. Reposition your center  
speaker.c)  
When warning codes appear  
During Auto Calibration, the warning code  
provides information on the measurement  
result. The warning code will appear on the  
display cyclically as follows:  
WARN. 73 The surround left speaker distance is  
out of range. Reposition your surround  
left speaker.c)  
WARN. 74 The surround right speaker distance is  
out of range. Reposition your surround  
right speaker.c)  
Warning code t blank display t (warning  
code t blank display) t PUSH t blank  
display t ENTER  
b)Appears when there are more than one warning  
code.  
b)  
c)For details, see “Note” and “Tip” on page 18.  
You can choose to ignore the warning code as  
the Auto Calibration function will  
automatically adjust the settings. You can also  
change the settings manually.  
To change the settings  
manually  
1 Record down the warning code.  
2 Press  
.
3 Press ?/1 to turn off the receiver.  
4 Follow the solution provided in the  
“Warning codes and solutions” below.  
5 Turn on the receiver and perform Auto  
Calibration again (page 31).  
33GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Press V/v repeatedly to select  
“AUTO xxx*”.  
Adjusting the speaker  
levels  
The test tone is output from each speaker  
in sequence as follow:  
Front left t Center t Front right t  
Surround right t Surround left t  
subwoofer  
(TEST TONE)  
You can adjust the speaker levels while  
listening to the test tone from your listening  
position.  
*xxx represent a speaker channel.  
Note  
Depending on the speaker pattern setting, test  
tone may not be output from all speakers even  
though you select “AUTO xxx”.  
SAT/  
BD  
TV  
DVD  
CATV  
Input  
buttons  
SA-CD/  
CD  
VIDEO  
TUNER  
DMPORT  
5 Adjust the speaker levels using  
the LEVEL menu so that the  
level of the test tone sounds the  
same from each speaker.  
For details, see LEVEL menu (page 59).  
Tips  
AMP  
MENU  
• To adjust the level of all speakers at the same  
time, press MASTER VOL +/–  
(RM-AAU071 only) or 2 +/–  
(RM-AAU074 only). You can also use  
MASTER VOLUME on the receiver.  
• The adjusted value are shown on the display  
during adjustment.  
,
V/v/B/b  
O
MENU  
m
M
x
X
>
.
6 Repeat steps 1 to 4 to select  
MASTER  
VOL +/–/  
2 +/–  
“OFF”.  
You can also press any input buttons.  
The test tone turns off.  
1 Press AMP MENU.  
When a test tone is not output  
from the speakers  
• The speaker cords may not be connected  
securely.  
2 Press V/v repeatedly to select  
“LEVEL”, then press or b.  
• The speaker cords may have the short-circuit  
problem.  
3 Press V/v repeatedly to select  
“T. TONE”, then press  
.
When a test tone is output from  
a different speaker than the  
speaker indicator showed in the  
display  
The speaker pattern to the connected speaker  
is not set up correctly. Make sure the speaker  
connection and the speaker pattern match.  
34GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
5 Press MASTER VOL +/–  
(RM-AAU071 only) or 2 +/–  
(RM-AAU074 only) to adjust the  
volume.  
Basic Operations  
Playback  
You can also use MASTER VOLUME on  
the receiver.  
SAT/  
BD  
DVD  
CATV  
Input  
buttons  
SA-CD/  
CD  
TV  
VIDEO  
TUNER  
6 Press SOUND FIELD +/– to  
DMPORT  
enjoy the surround sound.  
You can also use 2CH/A.DIRECT,  
A.F.D., MOVIE or MUSIC on the  
receiver.  
AMP  
MENU  
To activate the muting function  
Press MUTING (RM-AAU071 only) or  
(RM-AAU074 only) on the remote.  
The muting function will be canceled when  
you do the following.  
,
V/v/B/b  
O
MENU  
• Press MUTING (RM-AAU071 only) or  
(RM-AAU074 only) again.  
• Increase the volume.  
• Turn off the receiver.  
• Perform Auto Calibration  
m
M
MASTER  
VOL +/–/  
2 +/–  
x
X
>
.
SOUND  
FIELD +/–  
MUTING/  
To avoid damaging your  
speakers  
Before you turn off the receiver, be sure to turn  
down the volume level.  
1 Turn on the connected  
component.  
2 Turn on the receiver.  
3 Press one of the input buttons  
to select the component you  
want.  
You can also use INPUT SELECTOR on  
the receiver.  
The selected input appears on the display.  
4 Play back the source.  
35GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Naming inputs  
Viewing information on  
the display  
You can check the sound field, etc., by  
changing the information on the display.  
You can enter a name of up to 8 characters for  
inputs (except TUNER) and display it on the  
receiver’s display.  
This is convenient for labeling the jacks with  
the names of the connected components.  
1 Press one of the input buttons  
to select the input you want to  
create an index name for.  
DISPLAY  
You can also use INPUT SELECTOR on  
the receiver.  
2 Press AMP MENU.  
O
3 Press V/v repeatedly to select  
Press DISPLAY repeatedly.  
Each time you press the button, the display  
changes cyclically as follows:  
“SYSTEM”, then press  
or b.  
4 Press V/v repeatedly to select  
“NAME IN”, then press  
or b.  
The cursor flashes and you can select a  
character.  
All inputs except the FM and AM  
band  
a)  
Index name of the input t Selected input  
5 Press V/v to select a character,  
then press B/b to move the  
cursor to the next position.  
t Sound field currently applied t Volume  
level t Stream info  
If you made a mistake  
FM and AM band  
b)  
Press B/b until the character you want to  
change flashes, then press V/v to select  
the correct character.  
Program Service name or preset station  
a)  
name t Frequency t Program Type  
b)  
b)  
indication t Radio Text indication t  
Current Time indication (in 24-hour system  
mode) t Sound field currently applied t  
Volume level  
Tips  
b)  
You can select the character type as follows  
by pressing V/v.  
Alphabet (upper case) t Numbers t  
Symbols  
To enter a blank space, press b without  
selecting a character.  
a)Index name appears only when you have assigned  
one to the input or preset station (page 36, 41).  
Index name does not appear when only blank  
spaces have been entered, or it is the same as the  
input name.  
6 Press  
.
b)  
During RDS reception only (Models of area code  
ECE, CEK, AU1 only) (page 42).  
The name you entered is registered.  
Note  
Character or marks may not be displayed for some  
languages.  
36GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Using the Sleep Timer  
Recording  
You can set the receiver to turn off  
automatically at a specified time.  
You can record from a video/audio component  
using the receiver. Refer to the operating  
instructions supplied with your recording  
component.  
AMP  
MENU  
Recording onto a recording  
media  
,
V/v/B/b  
O
MENU  
1 Press one of the input buttons  
to select the playback  
component.  
1 Press AMP MENU.  
You can also use INPUT SELECTOR on  
the receiver.  
2 Press V/v repeatedly to select  
“SYSTEM”, then press  
or b.  
2 Prepare the playback  
3 Press V/v repeatedly to select  
component for playing.  
“SLEEP”, then press  
or b.  
For example, insert the video tape you  
want to copy into the VCR.  
4 Press V/v repeatedly to select  
the preset time you want, then  
3 Prepare the recording  
press  
.
component.  
The display changes as follows:  
OFF y 0-30-00 y 1-00-00 y  
1-30-00 y 2-00-00  
Insert a blank video tape, etc. into the  
recording component (VIDEO) for  
recording.  
When sleep timer is being used, “SLEEP”  
indicator lights up in the display.  
4 Start recording on the  
recording component, then  
start playback on the playback  
component.  
Note  
A count down is displayed 1 minute before the  
receiver turns off.  
Notes  
• Some sources contain copy guards to prevent  
recording. In this case, you may not be able to  
record from the source.  
• Only analog signals are output from the analog  
output jack (for recording).  
Tip  
To check the remaining time before the receiver  
turns off, repeat step 1 to 3 above. The remaining  
time appears on the display.  
• HDMI sound cannot be recorded.  
37GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Tuning into a station  
automatically (Automatic  
Tuning)  
Tuner Operations  
Listening to FM/AM radio  
1 Press TUNER repeatedly to  
You can listen to FM and AM broadcasts  
through the built-in tuner. Before operation,  
make sure you have connected the FM and  
AM antennas (aerials) to the receiver (page  
select the FM or AM band.  
2 Press TUNING + or TUNING –.  
Press TUNING + to scan from low to  
high; press TUNING – to scan from high  
to low.  
Tip  
The receiver stops scanning whenever a  
station is received.  
The tuning scale for direct tuning differs depending  
on the area code as shown in the following table. For  
details on area codes, see page 5.  
Area code  
U2, CA2  
FM  
AM  
Using the controls on the  
receiver  
100 kHz  
50 kHz  
10 kHz*  
9 kHz  
1 Turn INPUT SELECTOR to select the FM  
or AM band.  
ECE, CEK, AU1  
* The AM tuning scale can be changed (page 39).  
2 Press TUNING MODE repeatedly to select  
“AUTO”.  
3 Press TUNING + or TUNING –.  
SAT/  
BD  
TV  
DVD  
CATV  
Numeric  
buttons  
SA-CD/  
CD  
VIDEO  
TUNER  
TUNER  
DMPORT  
In case of poor FM stereo  
reception  
ENTER  
If the FM stereo reception is poor and “ST”  
flashes on the display, select monaural audio  
so that the sound will be less distorted.  
1 Press AMP MENU.  
D. TUNING  
2 Press V/v repeatedly to select “TUNER”,  
AMP  
MENU  
then press  
or b.  
,
3 Press V/v repeatedly to select  
V/v/B/b  
“FM MODE”, then press  
or b.  
O
4 Press V/v repeatedly to select “MONO”,  
MENU  
then press  
.
TUNING  
+/–  
5 To return to stereo mode, repeat steps 1 to 4  
and select “STEREO” in step 4.  
m
M
x
X
>
.
SHIFT  
38GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Tuning into a station directly  
(Direct Tuning)  
Changing the AM tuning scale  
(Models of area code U2, CA2 only)  
You can enter the frequency of a station  
directly by using the numeric buttons.  
You can change the AM tuning scale to either  
9 kHz or 10 kHz using the buttons on the  
receiver.  
1 Press TUNER repeatedly to  
?/1  
select the FM or AM band.  
You can also use INPUT SELECTOR on  
the receiver.  
?/1  
2 Press D.TUNING.  
3 Press and hold SHIFT, then  
press the numeric buttons to  
enter the frequency.  
TUNING MODE  
Example 1: FM 102.50 MHz  
• Models of area code U2 and CA2:  
Select 1 b 0 b 2 b 5  
1 Press ?/1 to turn off the  
receiver.  
• Models of area code ECE, CEK and  
AU1:  
Select 1 b 0 b 2 b 5 b 0  
Example 2: AM 1,350 kHz  
Select 1 b 3 b 5 b 0  
2 While holding down TUNING  
MODE, press ?/1.  
3 Change the current AM tuning  
scale to 9 kHz (or 10 kHz).  
4 Press and hold SHIFT, then  
To reset the scale to 10 kHz (or 9 kHz),  
repeat the procedure above.  
press ENTER.  
You can also use MEMORY/ENTER on  
the receiver.  
Note  
All preset stations will be erased when you change  
the tuning scale.  
Tip  
If you have tuned in an AM station, adjust the  
direction of the AM loop antenna for optimum  
reception.  
If you cannot tune in a station  
Make sure you have entered the right  
frequency. If not, repeat steps 2 to 4. If you  
still cannot tune in a station, the frequency is  
not used in your area.  
39GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
4 Press and hold SHIFT, then  
press the numeric buttons to  
select a preset number.  
Presetting FM/AM radio  
stations  
You can preset up to 30 FM stations and 30  
AM stations. Then you can easily tune in the  
stations you often listen to.  
You can also press PRESET + or  
PRESET – to select a preset number.  
5 Press and hold SHIFT, then  
press ENTER.  
You can also use MEMORY/ENTER on  
the receiver.  
The station is stored as the selected preset  
number.  
SAT/  
BD  
TV  
DVD  
CATV  
Numeric  
buttons  
SA-CD/  
CD  
VIDEO  
TUNER  
TUNER  
DMPORT  
ENTER  
6 Repeat steps 1 to 5 to preset  
another station.  
MEMORY  
AMP  
MENU  
,
V/v/B/b  
O
MENU  
m
M
PRESET  
+/–  
x
X
>
.
SHIFT  
1 Press TUNER repeatedly to  
select the FM or AM band.  
You can also use INPUT SELECTOR on  
the receiver.  
2 Tune in the station that you  
want to preset using Automatic  
Tuning (page 38) or Direct  
Switch the FM reception mode, if  
3 Press MEMORY.  
You can also use MEMORY/ENTER on  
the receiver.  
40GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5 Press V/v repeatedly to select  
Tuning to preset stations  
“NAME IN”, then press  
or b.  
The cursor flashes and you can select a  
character.  
1 Press TUNER repeatedly to  
select the FM or AM band.  
6 Press V/v to select a character,  
then press B/b to move the  
cursor to the next position.  
2 Press PRESET + or PRESET –  
repeatedly to select the preset  
station you want.  
If you made a mistake  
Each time you press the button, you can  
select a preset station as follows:  
Press B/b until the character you want to  
change flashes, then press V/v to select  
the correct character.  
1
2
3
4
5
...  
27  
Tips  
30  
29  
28  
You can select the character type as follows  
by pressing V/v.  
Alphabet (upper case) t Numbers t  
Symbols  
To enter a blank space, press b without  
selecting a character.  
You can also press and hold SHIFT and  
then press the numeric buttons to select  
the preset station you want. To enter the  
selection, press and hold SHIFT then  
press ENTER.  
7 Press  
.
Using the controls on the  
receiver  
The name you entered is registered.  
Note (Models of area code ECE, CEK,  
AU1 only)  
When you name an RDS station and tune in that  
station, the Program Service name appears instead  
of the name you entered. (You cannot change the  
Program Service name. The name you entered will  
be overwritten by the Program Service name.)  
1 Turn INPUT SELECTOR to select the FM  
or AM band.  
2 Press TUNING MODE repeatedly to select  
“PRESET”.  
3 Press TUNING + or TUNING – to select the  
preset station you want.  
Naming preset stations  
1 Press TUNER repeatedly to  
select the FM or AM band.  
You can also use INPUT SELECTOR on  
the receiver.  
2 Tune in the preset station you  
want to create an index name  
3 Press AMP MENU.  
4 Press V/v repeatedly to select  
“TUNER”, then press  
or b.  
41GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using the Radio Data  
System (RDS)  
Enjoying Surround Sound  
Selecting the sound field  
This receiver can create multi channel  
surround sound. You can select one of the  
optimized sound fields from the receiver’s  
preprogrammed sound fields.  
(Models of area code ECE, CEK,  
AU1 only)  
This receiver allows you to use Radio Data  
System (RDS), which enables radio stations to  
send additional information along with the  
regular program signal. This receiver offers  
convenient RDS features, such as program  
service name display.  
x
X
>
.
SOUND  
FIELD +/–  
Notes  
• RDS is operable only for FM stations.  
• Not all FM stations provide RDS service, nor do  
they provide the same type of services. If you are  
not familiar with the RDS services in your area,  
check with your local radio stations for details.  
Press SOUND FIELD +/– repeatedly  
to select the sound field you want.  
You can also press 2CH/A.DIRECT, A.F.D.,  
MOVIE or MUSIC on the receiver.  
Receiving RDS broadcasts  
Simply select a station on the FM  
band using Direct Tuning (page 39),  
Automatic Tuning (page 38), or  
Preset Tuning (page 41).  
When you tune in a station that provides RDS  
services, “RDS” lights up and the program  
service name appears on the display.  
2 channel sound mode  
You can switch the output sound to 2 channel  
sound regardless of the recording formats of  
the software you are using, the playback  
component connected, or the sound field  
settings of the receiver.  
Note  
x 2CH ST. (2 Channel Stereo)  
The receiver outputs the sound from the front  
left/right speakers only. There is no sound  
from the subwoofer.  
RDS may not work properly if the station you tuned  
to is not transmitting the RDS signal properly or if  
the signal strength is weak.  
Tip  
Standard 2 channel stereo sources completely  
bypass the sound field processing and multi  
channel surround formats are downmixed to 2  
channel except LFE signal.  
When a program service name is displayed, you can  
check the frequency by pressing DISPLAY  
42GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
x A.DIRECT (Analog direct)  
You can switch the audio of the selected input  
to 2 channel analog input. This function  
enables you to enjoy high quality analog  
sources without any adjusment.  
x C.ST.EX B (Cinema Studio EX  
DCS )  
Reproduces the sound characteristics of the  
Sony Pictures Entertainment “Kim Novak  
Theater” cinema production studio. This mode  
is ideal for watching science-fiction or action  
movies with lots of sound effects.  
When using this function, only the volume and  
front speaker level can be adjusted.  
Notes  
x C.ST.EX C (Cinema Studio EX  
DCS )  
• When headphones are connected, “HP DIR”  
appears on the display.  
Reproduces the sound characteristics of the  
Sony Pictures Entertainment scoring stage.  
This mode is ideal for watching musicals or  
films where orchestra music is featured in the  
soundtrack.  
You cannot select Analog Direct when you select  
BD, DVD, and DMPORT as input.  
Auto Format Direct (A.F.D.)  
mode  
x V. M. DIM (V. Multi Dimension  
DCS )  
Creates many virtual speakers from a single  
pair of actual surround speakers.  
The Auto Format Direct (A.F.D.) mode allows  
you to listen to high fidelity sound and select  
the decoding mode for listening to a 2 channel  
stereo sound as multi channel.  
x PLII MV (Pro Logic II Movie)  
Performs Dolby Pro Logic II Movie mode  
decoding. This setting is ideal for movies  
encoded in Dolby Surround. In addition, this  
mode can reproduce sound in 5.1 channel for  
watching videos of overdubbed or old movies.  
x A.F.D. AUTO (A.F.D. Auto)  
Presets the sound as it was recorded/encoded  
without adding any surround effects.  
x MULTI ST. (Multi Stereo)  
Outputs 2 channel left/right signals from all  
speakers.  
However, sound may not be output from  
certain speakers depending on the speaker  
settings.  
Music mode  
You can take advantage of surround sound  
simply by selecting one of the receiver’s  
preprogrammed sound fields. They bring the  
exciting and powerful sound of concert halls  
into your home.  
Movie mode  
You can take advantage of surround sound  
simply by selecting one of the receiver’s  
preprogrammed sound fields. They bring the  
exciting and powerful sound of movie theaters  
into your home.  
x HALL (Hall)  
Reproduces the acoustics of a classical concert  
hall.  
x JAZZ (Jazz Club)  
Reproduces the acoustics of a jazz club.  
x C.ST.EX A (Cinema Studio EX  
DCS )  
Reproduces the sound characteristics of the  
Sony Pictures Entertainment “Cary Grant  
Theater” cinema production studio. This is a  
standard mode, great for watching almost any  
type of movie.  
x CONCERT (Concert)  
Reproduces the acoustics of a 300-seat live  
house.  
continued  
43GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
x STADIUM (Stadium)  
Reproduces the feeling of a large open-air  
stadium.  
Notes on sound fields  
• Depends on the speaker pattern settings,  
some sound fields may not be available.  
• The effects provided by the virtual speakers  
may cause increased noise in the playback  
signal.  
x SPORTS (Sports)  
Reproduces the feeling of sports broadcasting.  
• When listening with sound fields that  
employ the virtual speakers, you will not be  
able to hear any sound coming directly from  
the surround speakers.  
• The sound fields for music and movie do not  
work in the following cases.  
x PORTABLE (Portable Audio  
Enhancer)  
Reproduces a clear enhanced sound image  
from your portable audio device. This mode is  
ideal for MP3 and other compressed music.  
– signals with a sampling frequency of more  
than 48 kHz is input.  
– Analog Direct is selected.  
x PLII MS (Pro Logic II Music)  
Perform Dolby Pro Logic II Music mode  
decoding. This setting is ideal for normal  
stereo sources such as CDs.  
• When multi channel Linear PCM signals are  
received via an HDMI IN jack, “A.F.D.  
AUTO” will be selected automatically.  
• When one of the sound fields for music is  
selected, no sound is output from the  
subwoofer if all the speakers are set to  
“LARGE” on the SPEAKER menu.  
However, the sound will be output from the  
subwoofer if  
When headphones are  
connected  
You can only select this sound field if the  
headphones are connected to the receiver.  
x HP 2CH (Headphones 2CH)  
This mode is selected automatically if you use  
headphones (except Analog Direct). Standard  
2 channel stereo sources completely bypass  
the sound field processing and multi channel  
surround formats are downmixed to 2  
channels except LFE signals.  
– the digital input signal contains LFE  
signals.  
– the front and surround speakers are set to  
“SMALL”.  
– the sound field for movie is selected.  
– the portable audio is selected.  
Tips  
You can identify the encoding format of DVD  
software, etc., by looking at the logo on the  
package.  
• Sound fields with DCS marks use DCS  
technology. For details on Digital Cinema Sound  
x HP DIR (Headphones Direct)  
Outputs the analog signals without processing  
by the equalizer, sound field, etc.  
If you connect a subwoofer  
This receiver will generate a low frequency  
signal for output to the subwoofer when there  
is no LFE signal, which is a low-pass sound  
effect output from a subwoofer to a 2 channel  
signal.  
To turn off the surround effect  
for movie/music  
Press SOUND FIELD +/– repeatedly to select  
“2CH ST.” or “A.F.D. AUTO”.  
You can also press 2CH/A.DIRECT  
repeatedly on the receiver to select “2CH ST.”  
or press A.F.D. repeatedly on the receiver to  
select “A.F.D. AUTO”.  
44GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When connecting Blu-ray disc players and other next generation HD  
players  
Digital audio formats that this receiver can decode depend on digital audio input jacks for the  
connected component. This receiver supports the following audio formats.  
Connection of the playback component and  
Maximumnumber  
of channels  
the receiver  
Audio format  
COAXIAL/OPTICAL  
HDMI  
a
Dolby Digital  
5.1  
a
a
×
DTS  
5.1  
7.1b)  
a
Multi channel Linear PCMa)  
a
a)Audio signals are output in another format if the playback component does not correspond to the format. For  
details, refer to the operating instructions of the playback component.  
b)The signal will be downmixed to 5.1 channel.  
45GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enjoying the surround  
effect at low volume  
levels  
Resetting sound fields to  
the initial settings  
Be sure to use the buttons on the receiver for  
this operation.  
(NIGHT MODE)  
?/1  
This function allows you to retain a theater like  
environment at low volume levels. This  
function can be used with other sound fields.  
When watching a movie late at night, you will  
be able to hear the dialog clearly even at a low  
volume level.  
?/1  
MUSIC  
AMP  
MENU  
1 Press ?/1 to turn off the  
,
V/v/B/b  
receiver.  
O
2 While holding down MUSIC,  
MENU  
press ?/1.  
“S.F. CLEAR” appears on the display and  
all sound fields are reset to their initial  
setting.  
1 Press AMP MENU.  
2 Press V/v repeatedly to select  
“AUDIO”, then press  
or b.  
3 Press V/v repeatedly to select  
“NIGHT M.”, then press  
or  
b.  
4 Press V/v repeatedly to select  
“NIGHT. ON”, then press  
.
Note  
This function does not work in the following cases:  
–signals with a sampling frequency of more than  
48 kHz are being received.  
–Analog Direct is selected.  
Tip  
While the NIGHT MODE is turned on,  
“D. RANGE” is automatically set to “COMP.  
MAX”.  
46GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Preparing for the  
“BRAVIA” Sync  
The receiver is compatible with the “Control  
for HDMI-Easy Setting” function.  
• If your TV is compatible with the “Control  
for HDMI-Easy Setting” function, you can  
set the receiver and playback components  
Control for HDMI function automatically by  
• If your TV is not compatible with the  
“Control for HDMI-Easy Setting” function,  
set the Control for HDMI function of the  
receiver, playback components and TV  
“BRAVIA” Sync Features  
What is “BRAVIA” Sync?  
“BRAVIA” Sync is compatible with Sony TV,  
Blu-ray Disc/DVD player, AV amplifier, etc.,  
that is equipped with the Control for HDMI  
function.  
By connecting Sony components that are  
compatible with the “BRAVIA” Sync with an  
HDMI cable (not supplied), operation is  
simplified as follows:  
• One-Touch Play (page 48)  
• System Power Off (page 50)  
• Audio Return Channel (page 51)  
If your TV is compatible with the  
“ControlforHDMI-EasySetting”  
function  
The Control for HDMI function of the receiver  
can be turned on simultaneously by turning on  
the Control for HDMI function of the TV.  
Control for HDMI is a mutual control function  
standard used by HDMI CEC (Consumer  
Electronics Control) for HDMI (High-  
Definition Multimedia Interface).  
We recommend that you connect the receiver  
to products featuring “BRAVIA” Sync.  
1 Connect the receiver, TV and playback  
components via HDMI connection  
Note  
(The respective components must be  
compatible with the Control for HDMI  
function.)  
Depending on the connected component, the  
Control for HDMI function may not work. Refer to  
the operating instructions of the component.  
2 Turn on the receiver, TV and playback  
components.  
3 Turn on the Control for HDMI function  
of the TV.  
The Control for HDMI function of the  
receiver and all the connected components  
are turned on simultaneously. When the  
setup is completed, “COMPLETE” will  
appear.  
For details on setting the TV, refer to the  
operating instructions supplied with the TV.  
continued  
47GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
If your TV is not compatible with  
the “Control for HDMI-Easy  
Setting” function  
Playing back components  
with one-touch operation  
(One-Touch Play)  
AMP  
MENU  
,
By a simple operation (one-touch),  
components connected to the receiver with  
HDMI connections start automatically.  
You can enjoy the sound/image from  
connected components.  
V/v/B/b  
O
MENU  
1 Perform the steps given in “If your TV is  
When you set PASS.THRUto “AUTO” or  
ON”, sound and image can be output only  
from the TV while the receiver remains in  
standby mode.  
2 Press AMP MENU.  
3 Press V/v repeatedly to select “HDMI”,  
When you start playback a connected  
component, the receiver and TV operation are  
simplified as follow:  
then press  
or b.  
4 Press V/v repeatedly to select  
“CTRL.HDMI”, then press  
or b.  
Receiver and TV  
5 Press V/v repeatedly to select “CTRL  
Turns on (if in standby mode)  
ON”, then press  
.
r
Control for HDMI function is activated.  
Switches to appropriate HDMI input  
6 Set the Control for HDMI function for  
the connected component to on.  
Notes  
If the Control for HDMI function for the  
connected component is already set to on,  
you do not need to change the setting.  
• Depending on the TV, the start of the content may  
not be output.  
• Depending on the settings, the receiver may not  
turns on when “PASS.THRU” is set to “AUTO” or  
“ON”.  
For details on setting the TV and connected  
components, refer to the operating instructions  
of the respective components.  
Tip  
You can also select a connected component, such as  
DVD/Blu-ray disc player using the TV menu. The  
receiver and TV will automatically switch to the  
appropriate HDMI input.  
Notes  
• Before you do the “Control for HDMI-Easy  
Setting” from the TV, be sure to turn on the TV,  
connected components and receiver.  
• If the playback components cannot function after  
you have made the settings for “Control for HDMI-  
Easy Setting”, check the Control for HDMI setting  
on your TV.  
• If the connected components do not support  
“Control for HDMI-Easy Setting”, you need to set  
the Control for HDMI function for the connected  
components to on before you perform the “Control  
for HDMI-Easy Setting” from the TV.  
48GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Notes  
• If System Audio Control does not function  
according to your TV setting, refer to the operating  
instructions of the TV.  
• When “CTRL.HDMI” is set to “CTRL ON”, the  
“AUDIO.OUT” settings in the HDMI menu will  
set automatically depending on the System Audio  
Control settings.  
• When you connect a TV that does not have System  
Audio Control function, the System Audio Control  
function does not work.  
• If the TV is turned on before turning on the  
receiver, the TV sound will not be output for a  
moment.  
Enjoying the TV sound  
from the speakers  
connected to the receiver  
(System Audio Control)  
You can enjoy the TV sound from the speakers  
connected to the receiver by a simple  
operation.  
You can operate System Audio Control  
function using the TV menu. For details, refer  
to the operating instructions of the TV.  
TV  
Receiver  
Sets System Audio  
Control to on  
Turns on (if in  
standby mode)  
Switches to  
appropriate  
HDMI input  
Minimizes TV  
volume  
Outputs TV  
sound  
You can also use the System Audio Control  
function as follows.  
• If you turn on the receiver while the TV is  
turned on, the System Audio Control  
function will automatically be set to on and  
the TV sound will output from the speakers  
connected to the receiver. However, if you  
turn off the receiver, the sound will output  
from the TV speakers.  
• When you adjust the TV volume, the  
receiver’s volume is adjusted  
simultaneously.  
49GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Notes  
• Set the TV Standby Synchro to on before using the  
System Power Off function. For details, refer to the  
operating instructions of the TV.  
• Depending on the status, the connected  
components may not be turned off. For details,  
refer to the operating instructions of the connected  
components.  
Turning off the receiver  
with the TV  
(System Power Off)  
When you turn the TV off by using the  
POWER button on the TV’s remote, the  
receiver and the connected components turn  
off automatically.  
You can also use the receiver’s remote to turn  
off the TV.  
TV ?/1  
SAT/  
BD  
TV  
DVD  
CATV  
SA-CD/  
CD  
VIDEO  
TUNER  
DMPORT  
O
MENU  
m
M
x
X
>
.
TV  
Press and hold TV, then press TV  
?/1.  
The TV, receiver and the components  
connected via HDMI are turned off.  
50GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Enjoying movies with the Enjoying the TV sound via  
optimum sound field  
(Theater/Theatre Mode Sync)  
an HDMI cable  
(Audio Return Channel)  
The Audio Return Channel (ARC) function  
enables the TV outputs the audio signals to the  
receiver via a HDMI cable connected to the  
HDMI TV OUT jack.  
You can enjoy the TV sound from the speakers  
connected to the receiver without connecting  
the TV OPTICAL IN or TV AUDIO IN jack.  
Press the THEATER or THEATRE  
button on the remote of the  
receiver, TV, or the Blu-ray disc  
player, while pointing the remote  
toward the TV.  
The sound field switches to “C.ST.EX B”.  
To return to the previous sound field, press the  
THEATER or THEATRE button again.  
AMP  
MENU  
Note  
The sound field may not switch depending on the  
TV.  
,
V/v/B/b  
O
Tip  
The sound field may be changed back to the  
MENU  
previous one when you change the TV’s input.  
1 Press AMP MENU.  
2 Press V/v repeatedly to select  
“HDMI”, then press  
or b.  
3 Press V/v repeatedly to select  
“ARC”, then press or b.  
4 Press V/v repeatedly to select  
“ARC ON”, then press  
.
Notes  
• This function does not work when you set  
“CTRL.HDMI” to “CTRL OFF” in the HDMI  
menu.  
• This function is only available when  
– your TV is compatible with Audio Return  
Channel (ARC) function.  
– INPUT MODE is set to “AUTO”.  
51GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Notes  
• Some audio input modes may not be set up  
depending on the input.  
Advanced Operations  
• When the Analog Direct function is selected, audio  
input is set to “ANALOG” automatically and you  
cannot select other modes.  
Switching between  
digital and analog audio  
(INPUT MODE)  
When you connect components to both digital  
and analog input jacks on the receiver, you can  
fix the audio input mode to either of them, or  
switch from one to the other, depending on the  
type of material you intend to watch.  
1 Turn INPUT SELECTOR on the  
receiver to select the input.  
You can also use the input buttons on the  
remote.  
2 Press INPUT MODE repeatedly  
on the receiver to select the  
audio input mode.  
The selected audio input mode appears on  
the display.  
Audio input modes  
x AUTO  
Gives priority to digital audio signals when  
there are both digital and analog connections.  
If there are more than one digital connection,  
HDMI audio signals have priority over  
COAXIAL and OPTICAL audio signals. If  
there are no digital audio signals, analog audio  
signals are selected.  
x COAX  
Specifies the digital audio signals input to the  
DIGITAL COAXIAL jack.  
x OPT  
Specifies the digital audio signals input to the  
DIGITAL OPTICAL jack.  
x ANALOG  
Specifies the analog audio signals input to the  
AUDIO IN (L/R) jacks.  
52GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Enjoying the sound from  
other inputs  
You can reassign audio signals to another  
input when they are not currently being used.  
For example, when you want to output the  
sound source for the DVD player using  
OPTICAL IN jack on the receiver:  
DVD player  
Connect to  
OPTICAL  
SAT/CATV IN  
jack (audio  
signal)  
?/1  
Assign to DVD input jack  
– using “A. ASSIGN” in  
AUDIO menu  
Receiver  
1 Press AMP MENU.  
2 Press V/v repeatedly to select  
“AUDIO”, then press  
or b.  
3 Press V/v repeatedly to select  
“A. ASSIGN”, then press  
or  
b.  
4 Press V/v repeatedly to select  
the input name you want to  
assign (for example, “DVD”),  
then press  
your selection.  
or b to enter  
5 Press V/v repeatedly to select  
the input jack you want to  
assign to the input which you  
selected in step 4.  
To return to the previous display  
Press B.  
continued  
53GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Assigning input jacks  
Assignable audio input  
jacks  
Input name  
VIDEO  
BD  
a
DVD  
a*  
a
SAT  
a
SA-CD  
Audio  
DVD COAX  
SAT OPT  
ANALOG  
NONE  
a
a
a*  
a
a
a*  
a
a*  
a
a*  
* Initial setting  
Notes  
• When you assign the digital audio input, the  
INPUT MODE setting may change automatically  
• You cannot reassign more than one digital audio  
input to the same input.  
54GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enjoying sound/images  
from the components  
connected to the DIGITAL  
MEDIA PORT  
Using the setting menu  
By using the amplifier menus, you can make  
various adjustments to customize the receiver.  
The DIGITAL MEDIA PORT (DMPORT)  
allows you to enjoy sound/images from a  
portable audio source or computer by  
connecting a DIGITAL MEDIA PORT  
adapter.  
AMP  
MENU  
,
V/v/B/b  
RETURN/  
EXIT O  
O
The DIGITAL MEDIA PORT adapters are  
available for purchase depending on the area.  
For details on connecting the DIGITAL  
MEDIA PORT adapter, see “4a: Connecting  
MENU  
1 Press AMP MENU.  
2 Press V/v repeatedly to select  
the menu you want, then press  
or b  
Notes  
• Depending on the DIGITAL MEDIA PORT  
adapter, video output may not be possible.  
• Depending on the type of DIGITAL MEDIA  
PORT adapter, you can operate the connected  
component by using the remote. For details on the  
remote button operation, see page 16.  
3 Press V/v repeatedly to select  
the parameter you want to  
adjust, then press  
or b  
4 Press V/v repeatedly to select  
1 Press DMPORT.  
the setting you want.  
You can also use the INPUT SELECTOR  
on the receiver to select “DMPORT”.  
The setting is entered automatically.  
2 Start playback of the connected  
To return to the previous  
display  
component.  
The sound is played back on the receiver  
and the image appears on the TV.  
For details, refer to the operating  
instructions supplied with the DIGITAL  
MEDIA PORT adapter.  
Press B or RETURN/EXIT O.  
To exit the menu  
Press AMP MENU.  
Note  
Tip  
Some parameters and settings may appear dimmed  
on the display. This means that they are either  
unavailable or fixed and unchangeable.  
When listening to MP3 or other compressed music  
using a portable audio source, you can enhance the  
sound. Press SOUND FIELD +/– (or press MUSIC  
on the receiver) repeatedly to select “PORTABLE”  
55GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Overview of the menus  
The following options are available in each menu. For details, see the page in the parentheses.  
Menu  
[Display]  
Parameters  
[Display]  
Settings  
Initial  
setting  
AUTO CALa)  
[A. CAL]  
Starts Auto Calibration  
[START]  
LEVEL  
[LEVEL]  
Test tonec)  
[T. TONE]  
OFF, AUTO xxxb)  
OFF  
Front left speaker level  
[FL LVL]  
FL –10.0 dB to FL +10.0 dB  
(0.5 dB per step)  
FL 0 dB  
FR 0 dB  
CNT 0 dB  
SL 0 dB  
SR 0 dB  
SW 0 dB  
COMP. OFF  
3/2.1  
Front right speaker level  
[FR LVL]  
Center speaker levelc)  
[CNT LVL]  
Surround left speaker levelc)  
[SL LVL]  
Surround right speaker levelc)  
[SR LVL]  
FR –10.0 dB to FR +10.0 dB  
(0.5 dB per step)  
CNT –20.0 dB to CNT +10.0 dB  
(0.5 dB per step)  
SL –20.0 dB to SL +10.0 dB  
(0.5 dB per step)  
SR –20.0 dB to SR +10.0 dB  
(0.5 dB per step)  
Subwoofer levelc)  
[SW LVL]  
SW –20.0 dB to SW +10.0 dB  
(0.5 dB per step)  
Dynamic range compressor  
[D. RANGE]  
COMP. MAX, COMP. STD,  
COMP. OFF  
SPEAKER  
[SPKR]  
Speaker pattern  
[PATTERN]  
Front speakers sizec)  
[FRT SIZE]  
Center speaker sizec)  
[CNT SIZE]  
Surround speakers sizec)  
[SUR SIZE]  
For details, see page 60  
LARGE, SMALL  
LARGE, SMALL  
LARGE, SMALL  
LARGE  
LARGE  
LARGE  
Front left speaker distancec)  
[FL DIST.]  
FL 1.0 m to FL 7.0 m  
(FL 3 ft to FL 22 ft)  
(0.1 m (1 ft) step)  
FL 3.0 m  
(FL 9 ft)  
Front right speaker distancec)  
[FR DIST.]  
FR 1.0 m to FR 7.0 m  
(FR 3 ft to FR 22 ft)  
(0.1 m (1 ft) step)  
FR 3.0 m  
(FR 9 ft)  
Center speaker distancec)  
[CNT DIST.]  
CNT 1.0 m to CNT 7.0 m  
(CNT 3 ft to CNT 22 ft)  
(0.1 m (1 ft) step)  
CNT 3.0 m  
(CNT 9 ft)  
Surround left speaker distancec) SL 1.0 m to SL 7.0 m  
SL 3.0 m  
(SL 9 ft)  
[SL DIST.]  
(SL 3 ft to SL 22 ft)  
(0.1 m (1 ft) step)  
56GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Menu  
[Display]  
Parameters  
[Display]  
Settings  
Initial  
setting  
Surround right speaker distancec) SR 1.0 m to SR 7.0 m  
SR 3.0 m  
(SR 9 ft)  
[SR DIST.]  
(SR 3 ft to SR 22 ft)  
(0.1 m (1 ft) step)  
Subwoofer distancec)  
[SW DIST.]  
SW 1.0 m to SW 7.0 m  
(SW 3 ft to SW 22 ft)  
(0.1 m (1 ft) step)  
SW 3.0 m  
(SW 9 ft)  
Distance unit  
[DIST.UNIT]  
METER, FEET  
METERf)  
Front speaker crossover  
frequencyd)  
CRS. 40 Hz to CRS. 200 Hz  
(10 Hz step)  
CRS. 120 Hz  
[FRT CRS.]  
Center speaker crossover  
frequencyd)  
[CNT CRS.]  
CRS. 40 Hz to CRS. 200 Hz  
(10 Hz step)  
CRS. 120 Hz  
CRS. 120 Hz  
Surround speaker crossover  
frequencyd)  
CRS. 40 Hz to CRS. 200 Hz  
(10 Hz step)  
[SUR CRS.]  
SURROUND  
[SURR]  
Sound field selection  
[S.F. SELCT]  
For details, see “Enjoying Surround A.F.D. AUTO  
Effect level  
[EFFECT]  
EFCT. MAX, EFCT. STD,  
EFCT. MIN  
EFCT. STD  
BASS 0 dB  
TRE 0 dB  
STEREO  
EQ  
[EQ]  
Front speakers bass level  
[BASS]  
BASS –10 dB to BASS +10 dB  
(1 dB per step)  
Front speakers treble level  
[TREBLE]  
TRE –10 dB to TRE +10 dB  
(1 dB per step)  
TUNER  
[TUNER]  
FM station receiving mode  
[FM MODE]  
STEREO, MONO  
Naming preset stations  
[NAME IN]  
AUDIO  
[AUDIO]  
Synchronizes audio with video SYNC ON, SYNC OFF  
output  
[A/V SYNC]  
SYNC OFF  
MAIN  
Digital broadcast language  
selection  
[DUAL]  
MAIN/SUB, MAIN, SUB  
DEC. AUTO, DEC. PCM  
Digital audio input decoding  
prioritye)  
DEC. AUTO  
[DEC. PRIO]  
Digital audio input assignment For details, see “Enjoying the sound  
[A. ASSIGN]  
Night mode  
[NIGHT M.]  
NIGHT.OFF, NIGHT. ON  
NIGHT.OFF  
continued  
57GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Menu  
[Display]  
Parameters  
[Display]  
Settings  
Initial  
setting  
HDMI  
[HDMI]  
Control for HDMI  
[CTRL.HDMI]  
CTRL ON, CTRL OFF  
ON, AUTO, OFF  
CTRL ON  
OFF  
HDMI pass through  
[PASS.THRU]  
Setting HDMI audio input  
[AUDIO.OUT]  
AMP, TV+AMP  
AMP  
Subwoofer level for HDMIe)  
[SW LEVEL]  
SW AUTO, SW +10 dB, SW 0 dB  
L.P.F. ON, L.P.F. OFF  
SW AUTO  
L.P.F. ON  
Subwoofer Low Pass Filter  
for HDMIe)  
[SW L.P.F.]  
Audio Return Channel  
[ARC]  
ARC ON, ARC OFF  
ARC ON  
DIM OFF  
OFF  
SYSTEM  
[SYSTEM]  
Brightness of the display  
[DIMMER]  
DIM MAX, DIM MID, DIM OFF  
Sleep timer mode  
[SLEEP]  
OFF, 0-30-00, 1-00-00, 1-30-00,  
2-00-00  
Auto standby mode  
[AUTO.STBY]  
STBY ON, STBY OFF  
STBY ON  
Naming inputs  
[NAME IN]  
a)Models of area code ECE, CEK, AU1 only.  
b)xxx represent a speaker channel (FL, FR, CNT, SL, SR, SW).  
c)Depends on the speaker pattern setting, some parameters may not be available.  
d)You cannot select this setting if your speaker is set to “LARGE”.  
e)This parameter is only available when HDMI input signals is detected.  
f) “FEET” for models of area code U2, CA2.  
58GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Note  
AUTO CAL menu  
Depends on the speaker pattern setting, some  
parameters may not be available.  
(Models of area code ECE, CEK,  
AU1 only)  
You can perform automatic calibration to get  
proper sound balance in your room.  
x D. RANGE  
Lets you compress the dynamic range of the  
soundtrack. This may be useful when you want  
to watch movies at low volumes late at night.  
Dynamic range compression is possible with  
Dolby Digital sources only.  
• COMP. MAX  
The dynamic range is compressed  
dramatically.  
LEVEL menu  
• COMP. STD  
You can adjust the level of each speaker.  
These settings are applied to all sound fields.  
The dynamic range is compressed as  
intended by the recording engineer.  
• COMP. OFF  
x T. TONE  
The dynamic range is not compressed.  
Lets you adjust the speaker levels while  
listening to the test tone from your listening  
position.  
Tip  
Dynamic range compressor lets you compress the  
dynamic range of the soundtrack based on the  
dynamic range information included in the Dolby  
Digital signal.  
• OFF  
The test tone is turned off.  
• AUTO xxx*  
“COMP. STD” is the standard setting, but it only  
enacts light compression. Therefore, we recommend  
using the “COMP. MAX” setting. This greatly  
compresses the dynamic range and lets you view  
movies late at night at low volumes. Unlike analog  
limiters, the levels are predetermined and provide a  
very natural compression.  
The test tone is output from each speaker in  
sequence.  
* xxx represent a speaker channel.  
Adjusting the speaker level  
You can adjust each speaker’s level using the  
following parameters.  
For front left/right speakers, you can adjust the  
level from –10.0 dB to +10.0 dB in 0.5 dB  
steps. For other speakers, you can adjust the  
level from –20.0 dB to +10.0 dB in 0.5 dB  
steps.  
x FL LVL  
x FR LVL  
x CNT LVL  
x SL LVL  
x SR LVL  
x SW LVL  
59GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
SPEAKER menu  
You can set the size and distance of the speakers connected to this receiver.  
x PATTERN  
Lets you set the number of speakers connected to this receiver. It should be synchronize with the  
speakers settings.  
For example:  
3 / 2 . 1  
2 front+  
center  
2 surround subwoofer  
Speaker  
pattern  
Front left/right  
Center  
Surround  
left/right  
Subwoofer  
3/2.1  
3/2  
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
2/2.1  
2/2  
a
3/0.1  
3/0  
a
a
a
2/0.1  
2/0  
a
60GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
x FRT SIZE  
• LARGE  
x SUR SIZE  
• LARGE  
If you connect large speakers that will  
effectively reproduce bass frequencies,  
select “LARGE”. Normally, select  
“LARGE”. However, if you have selected a  
speaker pattern without subwoofer, the front  
speakers are automatically set to “LARGE”.  
• SMALL  
If you connect large speakers that will  
effectively reproduce bass frequencies,  
select “LARGE”. Normally, select  
“LARGE”. However, if the front speakers  
are set to “SMALL”, you cannot set the  
surround speakers to “LARGE”.  
• SMALL  
If the sound is distorted, or you feel a lack of  
surround effects when using multi channel  
surround sound, select “SMALL” to activate  
the bass redirection circuitry and output the  
front channel bass frequencies from the  
subwoofer. When the front speakers are set  
to “SMALL”, the center and surround  
speakers are also automatically set to  
“SMALL”.  
If the sound is distorted, or you feel a lack of  
surround effects when using multi channel  
surround sound, select “SMALL” to activate  
the bass redirection circuitry and output the  
surround channel bass frequencies from the  
subwoofer or other speaker that is set to  
“LARGE”.  
Tip  
The “LARGE” and “SMALL” settings for each  
speaker determine whether the internal sound  
processor will cut the bass signal from that channel.  
When the bass is cut from a channel, the bass  
redirection circuitry sends the corresponding bass  
frequencies to the subwoofer or other “LARGE”  
speakers.  
However, since bass sounds have a certain amount of  
directionality, it is best not to cut them, if possible.  
Therefore, even when using small speakers, you can  
set them to “LARGE” if you want to output the bass  
frequencies from that speaker. On the other hand, if  
you are using a large speaker, but prefer not to have  
bass frequencies output from that speaker, set it to  
“SMALL”.  
x CNT SIZE  
• LARGE  
If you connect a large speaker that will  
effectively reproduce bass frequencies,  
select “LARGE”. Normally, select  
“LARGE”. However, if the front speakers  
are set to “SMALL”, you cannot set the  
center speaker to “LARGE”.  
• SMALL  
If the sound is distorted, or you feel a lack of  
surround effects when using multi channel  
surround sound, select “SMALL” to activate  
the bass redirection circuitry and output the  
center channel bass frequencies from the  
front speakers (if set to “LARGE”) or  
subwoofer.  
If the overall sound level is lower than you prefer, set  
all speakers to “LARGE”. If there is not enough  
bass, you can use the equalizer to boost the bass  
levels. For details, see page 57.  
x FL DIST.  
x FR DIST.  
Lets you set the distance from your listening  
position to the front speakers.  
If both front speakers are not placed an equal  
distance from your listening position, set the  
distance to the closest speaker.  
x CNT DIST.  
Lets you set the distance from your listening  
position to the center speaker.  
continued  
61GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
x SL DIST.  
SURROUND menu  
x SR DIST.  
Lets you set the distance from your listening  
position to the surround speakers.  
You can select the sound field you want for  
your listening pleasure.  
x S.F. SELCT  
x SW DIST.  
Lets you set the distance from your listening  
position to the subwoofer.  
Lets you select the sound field you want. For  
42).  
Notes  
Note  
• Depends on the speaker pattern setting, some  
parameters may not be available.  
• This function does not work in the following cases.  
– Signals with a sampling frequency of more than 48  
kHz are being received.  
The receiver lets you apply the last selected sound  
field to an input whenever it is selected (Sound Field  
Link). For example, if you select “HALL” for the  
DVD input, then change to a different input and then  
return to DVD, “HALL” will automatically be  
applied again.  
– the multi channel Linear PCM signals are received  
via an HDMI IN jack.  
– Analog Direct is selected.  
x EFFECT  
Lets you adjust the “presence” of the surround  
effect for the Cinema Studio EX A/B/C sound  
fields.  
x DIST.UNIT  
Lets you select the unit of measure for setting  
distances.  
• METER  
The distance is displayed in meters.  
• FEET  
EQ menu  
The distance is displayed in feet.  
You can adjust the tonal quality (bass/treble  
level) of the front speakers.  
x FRT CRS.  
Lets you set the bass crossover frequency of  
the front speakers that have been set to  
“SMALL” in the SPEAKER menu.  
x BASS  
x TREBLE  
Note  
x CNT CRS.  
This function does not work in the following cases:  
– signals with a sampling frequency of more than  
48kHz are being received.  
– the multi channel Linear PCM signals are received  
via an HDMI IN jack.  
Lets you set the bass crossover frequency of  
the center speaker that have been set to  
“SMALL” in the SPEAKER menu.  
– Analog Direct is selected.  
x SUR CRS.  
Lets you set the bass crossover frequency of  
the surround speakers that have been set to  
“SMALL” in the SPEAKER menu.  
62GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
x DUAL  
TUNER menu  
Lets you select the language you want to listen  
to during digital broadcast. This feature only  
functions for Dolby Digital sources.  
• MAIN/SUB  
You can set the FM station receiving mode and  
name the preset stations.  
Sound of the main language will be output  
through the front left speaker and sound of  
the sub language will be output through the  
front right speaker simultaneously.  
• MAIN  
Sound of the main language will be output.  
• SUB  
Sound of the sub language will be output.  
x FM MODE  
• STEREO  
This receiver will decode the signal as stereo  
signal when the radio station is broadcast in  
stereo.  
• MONO  
This receiver will decode the signal as mono  
signal regardless of the broadcast signal.  
x DEC. PRIO  
x NAME IN  
Lets you specify the input mode for the digital  
signal input to the DIGITAL IN jacks or  
HDMI IN jacks.  
Lets you set the name of preset stations. For  
• DEC. AUTO  
Automatically switches the input mode  
between DTS, Dolby Digital, or PCM.  
• DEC. PCM  
AUDIO menu  
You can make settings for the audio to suit  
your preference.  
When signals from the DIGITAL IN jack are  
selected, PCM signals are given priority (to  
prevent interruption when playback starts).  
However, when other signals are input, there  
may be no sound, depending on the format.  
In this case, set this item to “DEC. AUTO”.  
When signals from the HDMI IN jack are  
selected, only PCM signals are output from  
the connected player. When signals in any  
other format are received, set this item to  
“DEC. AUTO”.  
x A/V SYNC  
Lets you delay the output of audio to minimize  
the time gap between audio output and visual  
display.  
• SYNC ON (Delay time: 60 ms)  
The audio output is delayed so that the time  
gap between the audio output and visual  
display is minimized.  
• SYNC OFF (Delay time: 0 ms)  
The audio output is not delayed.  
Notes  
• Even when “DEC. PRIO” is set to “DEC.  
PCM”, the sound may be interrupted at the very  
beginning of the first track depending on the CD  
being played back.  
• When playback DTS CD, set “DEC. PRIO” to  
“DEC. AUTO”.  
Notes  
• This parameter is useful when you use a large LCD  
or plasma monitor or a projector.  
• This parameter is valid only when you use a sound  
field selected with the 2CH or A.F.D. buttons.  
• This function does not work in the following cases:  
– signals with a sampling frequency of more than  
48 kHz is input.  
– the multi channel Linear PCM signals are received  
via an HDMI IN jack.  
– Analog Direct function is selected (page 42).  
x A. ASSIGN  
Lets you assign the digital audio input to other  
input source. For details, see “Enjoying the  
continued  
63GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Notes  
x NIGHT M.  
• This parameter is not available when  
“CTRL.HDMI” is set to “CTRL OFF”.  
• When “AUTO” is selected, it may take a little more  
time for the image and sound to be output to the TV  
than when “ON” is selected.  
• When the receiver is in standby mode, “HDMI”  
indicator will lights up if “PASS.THRU” is set to  
“AUTO” or “ON”. However, when  
Lets you to retain a theater-like environment at  
low volume levels. For details, see “Enjoying  
• NIGHT.OFF  
• NIGHT. ON  
“PASS.THRU” is set to “AUTO”, this indicator  
will lights off if no signals are detected.  
HDMI menu  
You can make various adjustments for HDMI  
settings.  
x AUDIO.OUT  
Lets you set the HDMI audio output from the  
playback component connected to the receiver  
via an HDMI connection.  
x CTRL.HDMI  
Lets you turn the Control for HDMI function  
on or off. For details, see ““BRAVIA” Sync  
• AMP  
The HDMI audio signals from the playback  
component are only output to the speakers  
connected to the receiver. Multi channel  
sound can be played back as it is.  
x PASS.THRU  
Lets you output the HDMI signals to the TV  
even when the receiver is in standby mode.  
• ON  
Note  
Audio signals are not output from the TV’s  
When the receiver is in the standby mode,  
the receiver continuously outputs HDMI  
signals from the receiver’s HDMI TV OUT  
jack.  
speakers when “AUDIO.OUT” is set to “AMP”.  
• TV+AMP  
The sound is output from TV’s speaker and  
the speakers connected to the receiver.  
• AUTO  
When the TV is turned on while the receiver  
is in the standby mode, the receiver outputs  
HDMI signals from the receiver’s HDMI TV  
OUT jack. Sony recommends this setting if  
you use a TV that is compatible with  
“BRAVIA” Sync. This setting saves power  
in the standby mode compared with the  
“ON” setting.  
Notes  
• The sound quality of the playback component  
depends on the TV’s sound quality, such as the  
number of channels, and the sampling frequency,  
etc. When the TV has stereo speakers, the sound  
output from the receiver is also stereo as that of  
the TV, even if you play back multi channel  
software.  
• When you connect the receiver to an image  
display component (projector, etc.), sound may  
not be output from the receiver. In this case,  
select “AMP”.  
• OFF  
The receiver does not output HDMI signals  
when in the standby mode. Turn on the  
receiver to enjoy the connected component’s  
source on the TV. This setting saves power in  
the standby mode compared with the “ON”  
setting.  
64GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
x SW LEVEL  
SYSTEM menu  
Lets you set the level of the subwoofer to 0 dB  
or +10 dB when multi channel Linear PCM  
signals are input via an HDMI connection. You  
can set the level for each HDMI input  
independently.  
You can customize the settings of the receiver.  
x DIMMER  
Lets you adjust the brightness of the display in  
3 levels.  
• SW AUTO  
Automatically sets the level to 0 dB or  
+10 dB depending on the frequency.  
• SW +10 dB  
x SLEEP  
Lets you set the Sleep Timer on the receiver to  
turn off automatically at the specific time. For  
• SW 0 dB  
Note  
This parameter is only available when HDMI input  
signals are detected.  
x AUTO.STBY  
Lets you set the receiver switch to standby  
mode automatically after 30 minutes when  
you do not operate the receiver or when there  
is no signals input to the receiver.  
• STBY ON  
Switches to standby mode after  
approximately 30 minutes.  
• STBY OFF  
x SW L.P.F.  
Lets you set the low pass filter of the  
subwoofer when multi channel Linear PCM  
signals are input via an HDMI connection. Set  
the “SW L.P.F.” if your connected  
subwoofer’s crossover frequency do not have  
low pass filter.  
Does not switch to standby mode.  
• L.P.F. ON  
The low pass filter of the subwoofer’s cut off  
frequency is set to 120 Hz.  
• L.P.F. OFF  
Notes  
• This function does not work when TUNER input is  
selected.  
The low pass filter of the subwoofer is  
turned off.  
• If you use the auto standby mode and the Sleep  
Timer at the same time, the Sleep Timer has  
priority.  
Note  
This parameter is only available when HDMI input  
signals are detected.  
x NAME IN  
Lets you set the name of inputs. For details,  
x ARC  
Lets you enjoy the TV sound from the  
speakers connected to the receiver via an  
HDMI cable. For details, see “Enjoying the  
TV sound via an HDMI cable” (page 51).  
• ARC ON  
Audio signal is input to the HDMI TV OUT  
jack.  
• ARC OFF  
Audio signal is output through the TV  
OPTICAL IN jack or TV AUDIO IN jack.  
Note  
This parameter is not available when  
“CTRL.HDMI” is set to “CTRL OFF”.  
65GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
3 Referring to the following table,  
press the corresponding  
Using the Remote  
button for the category you  
want, then release AV ?/1.  
Example: Press 1, then release AV ?/1.  
Now you can use the DVD button to  
control the Blu-ray disc player.  
Changing the input button  
assignments  
You can change the initial settings of the input  
buttons to suit the components in your system.  
For example, if you connect a Blu-ray disc  
player to the DVD jack on the receiver, you  
can set the DVD button on this remote to  
control the Blu-ray disc player.  
Categories and the  
corresponding buttons for BD,  
DVD, SAT/CATV, VIDEO and  
SA-CD/CD  
Categories  
Press  
Note  
You cannot change the remote assignments for  
DMPORT, TUNER and TV input buttons.  
Blu-ray disc player  
(command mode BD1)  
1
a)  
a)  
Blu-ray disc recorder  
(command mode BD3)  
2
3
4
AV ?/1  
DVD player  
(command mode DVD1)  
SAT/  
Assignable  
Input  
buttons  
BD  
TV  
DVD  
CATV  
SA-CD/  
CD  
Numeric  
buttons  
VIDEO  
TUNER  
DVD recorder  
(command mode DVD3)  
b)  
DMPORT  
c)  
VCR (command mode VTR3)  
CD player  
5
6
7
d)  
DSS (Digital Satellite Receiver) /  
e)  
1 While holding down the input  
button of which you want to  
change the assignment, hold  
down AV ?/1.  
Euro Digital Satellite Receiver  
a)For details on the BD1 or BD3 setting, refer to the  
operating instructions supplied with the Blu-ray  
disc player or Blu-ray disc recorder.  
b)Sony DVD recorders are operated with a DVD1 or  
DVD3 setting. For details, refer to the operating  
instructions supplied with the DVD recorders.  
c)Sony VCRs are operated with a VTR 2 or VTR 3  
setting which corresponds to 8 mm and VHS  
respectively.  
Example: While holding down DVD,  
hold down AV ?/1.  
2 With the AV ?/1 button held,  
release the input button you  
selected in step 1.  
d)RM-AAU071 only.  
e)RM-AAU074 only.  
Example: With the AV ?/1 button held,  
release DVD.  
66GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Clearing all the contents  
of the remote’s memory  
Additional Information  
Glossary  
INPUT/  
x Cinema Studio EX  
?/1  
A surround sound mode that can be regarded  
as the compilation of Digital Cinema Sound  
technology, delivers the sound of a dubbing  
theater using three technologies: “Virtual  
Multi Dimensions,” “Screen Depth Matching,”  
and “Cinema Studio Reverberation.”  
SAT/  
BD  
TV  
DVD  
CATV  
SA-CD/  
CD  
VIDEO  
TUNER  
DMPORT  
“Virtual Multi Dimensions,” the virtual  
speaker technology, creates a virtual multi-  
surround environment with actual speakers up  
to 7.1 channels, and brings the surround sound  
experience of a theater with the latest facilities  
into your home.  
“Screen Depth Matching” reproduces treble  
attenuation, fullness, and depth of sound  
usually created in a theater using sound  
emission from behind the screen. This is then  
added to the front and center channels.  
“Cinema Studio Reverberation” reproduces  
the sound characteristics of state-of-the-art  
dubbing theaters and recording studios,  
including Sony Pictures Entertainment’s  
dubbing studios. There are three modes,  
A/B/C, available according to the studio type.  
O
MENU  
m
M
x
X
>
.
MASTER  
VOL –/  
2 –  
RM-AAU071 only  
x Component video  
A format for transmitting video signal  
information consisting of three separate  
signals: luminance Y, chrominance Pb, and  
chrominance Pr. High quality pictures, such as  
DVD video or HDTV pictures, are transmitted  
more faithfully. The three jacks are color -  
coded green, blue and red.  
While holding down MASTER VOL –, press  
?/1 and INPUT.  
RM-AAU074 only  
While holding down 2 –, press ?/1 and  
/
.
The remote is reset to its initial settings.  
x Composite video  
A standard format for transmitting video  
signal information. The luminance signal Y  
and chrominance signal C are combined and  
transmitted together.  
continued  
67GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
x Deep Colour (Deep Color)  
Video signals for which the color depth of  
signals passing through an HDMI jack have  
been raised.  
x Dolby Surround (Dolby Pro  
Logic)  
Audio processing technology developed by  
Dolby Laboratories, Inc. Center and mono  
surround information is matrixed into two  
stereo channels. When reproduced, audio is  
decoded and output in 4 channel surround  
sound. This is the most common audio  
processing method for DVD video.  
The number of colors that could be expressed  
by 1 pixel was 24 bits (16,777,216 colors) with  
the current HDMI jack. However, the number  
of colors which can be expressed by 1 pixel  
will be 36 bits, etc., when the receiver  
corresponds to Deep Colour (Deep Color).  
Since the gradation of the depth of a color can  
be expressed more finely with more bits,  
continuous color changes can be more  
smoothly expressed.  
x DTS Digital Surround  
Digital audio encoding/decoding technology  
for theaters developed by DTS, Inc. It  
compresses audio less than Dolby Digital,  
delivering a higher quality sound  
reproduction.  
x Digital Cinema Sound (DCS)  
A unique sound reproduction technology for  
home theater developed by Sony, in  
cooperation with Sony Pictures Entertainment,  
for enjoying the exciting and powerful sound  
of movie theaters at home. With this “Digital  
Cinema Sound” developed by integrating a  
DSP (Digital Signal Processor) and measured  
data, the ideal sound field intended by  
x HDMI (High-Definition  
Multimedia Interface)  
HDMI (High-Definition Multimedia  
Interface) is an interface that supports both  
video and audio on a single digital connection,  
allowing you to enjoy high quality digital  
picture and sound. The HDMI specification  
supports HDCP (High-bandwidth Digital  
Contents Protection), a copy protection  
technology that incorporates coding  
technology for digital video signals.  
filmmakers can be experienced at home.  
x Dolby Digital  
Digital audio encoding/decoding technology  
developed by Dolby Laboratories, Inc. It  
consists of front (left/right), center, surround  
(left/right) and subwoofer channels. It is a  
designated audio standard for DVD video and  
also known as 5.1 channel surround. Since  
surround information is recorded and  
reproduced in stereo, more realistic sound with  
fuller presence is delivered than with Dolby  
surround.  
x L.F.E. (Low Frequency Effects)  
Sound effects of low frequencies which are  
output from a subwoofer in Dolby Digital or  
DTS, etc. By adding a deep bass with a  
frequency between 20 to 120 Hz, audio  
becomes more powerful.  
x PCM (Pulse Code Modulation)  
A method of converting analog audio to digital  
audio for easy enjoyment of digital sound.  
x Dolby Pro Logic II  
This technology converts 2 channel stereo  
recorded audio into 5.1 channel for playback.  
There is a MOVIE mode for movies and  
MUSIC mode for stereo sources such as  
music. Old movies encoded in the traditional  
stereo format can be enhanced with 5.1  
channel surround sound.  
68GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
x Sampling frequency  
To convert analog audio to digital, analog data  
should be quantified. This process is called  
sampling, and the number of times per second  
the analog data is quantified is called the  
sampling frequency. A standard music CD  
stores data quantified at 44,100 times per  
second, which is expressed as a sampling  
frequency of 44.1 kHz. Generally speaking, a  
higher sampling frequency means better sound  
quality.  
Precautions  
On safety  
Should any solid object or liquid fall into the  
cabinet, unplug the receiver and have it  
checked by qualified personnel before  
operating it any further.  
On power sources  
• Before operating the receiver, check that the  
operating voltage is identical with your local  
power supply.  
The operating voltage is indicated on the  
nameplate on the back of the receiver.  
• The unit is not disconnected from the AC  
power source (mains) as long as it is  
connected to the wall outlet, even if the unit  
itself has been turned off.  
x x.v.Colour (x.v.Color)  
x.v.Colour (x.v.Color) is a more familiar term  
for the xvYCC standard proposed by Sony,  
and is a trademark of Sony. xvYCC is an  
international standard for color space in video.  
This standard can express a wider colour range  
than the currently used broadcast standard.  
• If you are not going to use the receiver for a  
long time, be sure to disconnect the receiver  
from the wall outlet. To disconnect the AC  
power cord (mains lead), grasp the plug  
itself; never pull the cord.  
• The AC power cord (mains lead) must be  
changed only at a qualified service shop.  
• (Models of area code U2, CA2 only)  
One blade of the plug is wider than the other  
for the purpose of safety and will fit into the  
wall outlet only one way. If you are unable to  
insert the plug fully into the outlet, contact  
your dealer.  
On heat buildup  
Although the receiver heats up during  
operation, this is not a malfunction. If you  
continuously use this receiver at a large  
volume, the cabinet temperature of the top,  
side and bottom rises considerably. To avoid  
burning yourself, do not touch the cabinet.  
continued  
69GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
On placement  
• Place the receiver in a location with adequate  
ventilation to prevent heat buildup and  
prolong the life of the receiver.  
• Do not place the receiver near heat sources,  
or in a place subject to direct sunlight,  
excessive dust, or mechanical shock.  
• Do not place anything on top of the cabinet  
that might block the ventilation holes and  
cause malfunctions.  
• Do not place the receiver near equipment  
such as a TV, VCR, or tape deck. (If the  
receiver is being used in combination with a  
TV, VCR, or tape deck, and is placed too  
close to that equipment, noise may result,  
and picture quality may suffer. This is  
especially likely when using an indoor  
antenna (aerial). Therefore, we recommend  
using an outdoor antenna (aerial).)  
• Use caution when placing the receiver on  
surfaces that have been specially treated  
(with wax, oil, polish, etc.) as staining or  
discoloration of the surface may result.  
Troubleshooting  
If you experience any of the following  
difficulties while using the receiver, use this  
troubleshooting guide to help you remedy the  
problem. Should any problem persist, consult  
your nearest Sony dealer.  
Audio  
There is no sound, no matter which  
component is selected, or only a very  
low-level sound is heard.  
• Check that the speakers and components  
are connected correctly and securely.  
• Check that all speaker cords are connected  
correctly.  
• Check that both the receiver and all  
components are turned on.  
• Check that MASTER VOLUME is not set  
to “VOL MIN”.  
• Check that headphones are not connected.  
• Press MUTING (RM-AAU071 only) or  
(RM-AAU074 only) on the remote to  
cancel the muting function.  
• Check that you have selected the correct  
component with the input buttons.  
• The protective device on the receiver has  
been activated. Turn off the receiver,  
eliminate the short-circuit problem, and  
turn on the power again.  
On operation  
Before connecting other components, be sure  
to turn off and unplug the receiver.  
On cleaning  
Clean the cabinet, panel, and controls with a  
soft cloth slightly moistened with a mild  
detergent solution. Do not use any type of  
abrasive pad, scouring powder, or solvent,  
such as alcohol or benzine.  
There is no sound from a specific  
component.  
• Check that the component is connected  
correctly to the audio input jacks for that  
component.  
If you have any questions or problems  
concerning your receiver, please consult your  
nearest Sony dealer.  
• Check that the cord(s) used for the  
connection is (are) fully inserted into the  
jacks on both the receiver and the  
component.  
70GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
There is no sound from one of the front  
speakers.  
The source sound input to the HDMI  
jack is not output from the receiver or  
the TV speaker.  
• You cannot listen to the Super Audio CD  
by connecting HDMI.  
• Depending on the playback component,  
you may need to set up the component.  
Refer to the operating instructions  
supplied with each component.  
• Be sure to use a High Speed HDMI cable  
when you view images or listen to sound  
during Deep Colour (Deep color)  
transmission.  
• Connect a pair of headphones to the  
PHONES jack to verify that sound is  
output from the headphones. If only one  
channel is output from the headphones, the  
component may not be connected to the  
receiver correctly. Check that all the cords  
are fully inserted into the jacks on both the  
receiver and the component. If both  
channels are output from the headphones,  
the front speaker may not be connected to  
the receiver correctly. Check the  
connection of the front speaker which is  
not outputting any sound.  
• Make sure you have connected to both the  
L and R jacks of an analog component, and  
not only to either the L or R jack. Use an  
audio cord (not supplied).  
The left and right sounds are  
unbalanced or reversed.  
• Check that the speakers and components  
are connected correctly and securely.  
• Adjust the level parameters using the  
There is no sound from analog 2  
channel sources.  
“- - - - - -” appears on the display.  
• Check that your component is connected  
to the COAXIAL or OPTICAL jack. If no  
signal is input through the COAXIAL or  
OPTICAL jack, “- - - - - -” appears on the  
display and this is not a malfunction.  
• Check that the INPUT MODE is not set to  
connection is not made for the selected  
input.  
• Check that the INPUT MODE is not set to  
“AUTO” (page 52) and the “A. ASSIGN”  
function is not used to reassign the audio  
input of another source to the selected  
There is severe hum or noise.  
• Check that the speakers and components  
are connected securely.  
• Check that the connecting cords are away  
from a transformer or motor, and at least  
3 meters (10 feet) away from a TV set or  
fluorescent light.  
• Check that the INPUT MODE is not set to  
“COAX” or “OPT”.  
There is no sound from digital sources  
(from COAXIAL or OPTICAL input jack).  
• Move your audio components away from  
the TV.  
• Check that the INPUT MODE is not set to  
“ANALOG” (page 52).  
• The plugs and jacks are dirty. Wipe them  
with a cloth slightly moistened with  
alcohol.  
• Check that the Analog Direct is not being  
used.  
• Check that the “A. ASSIGN” function is  
not used to reassign the audio input of  
another source to the selected input (page  
• Set “ARC” to “ARC OFF” when no sound  
is output from TV OPTICAL IN jack  
during TV input (page 58).  
continued  
71GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
• Select the source component using the  
input buttons.  
There is no sound, or only a very low-  
level sound is heard from the center/  
surround.  
• Select a CINEMA STUDIO EX mode  
• Check that the speaker settings are  
appropriate using the AUTO CAL menu  
or “PATTERN” in the SPEAKER menu.  
Then check that sound is output from each  
speaker correctly, using “T. TONE” in the  
LEVEL menu.  
There is no sound from the component  
connected to the DIGITAL MEDIA  
PORT adapter.  
• Adjust the volume of this receiver.  
• The DIGITAL MEDIA PORT adapter  
and/or component is not connected  
correctly. Turn off the receiver, then  
reconnect the DIGITAL MEDIA PORT  
adapter and/or component.  
• Adjust the speaker level (page 34).  
• Check the DIGITAL MEDIA PORT  
adapter and/or component device to make  
sure it supports this receiver.  
There is no sound from the subwoofer.  
• Check that the subwoofer is connected  
correctly and securely.  
• Make sure you have turned on your  
subwoofer.  
• Depending on the selected sound field, no  
sound output from the subwoofer.  
• Check “PATTERN” in the SPEAKER  
Video  
There is no picture or an unclear  
picture appears on the TV screen or  
monitor.  
• Select the appropriate input using the input  
buttons.  
• Set your TV to the appropriate input mode.  
• Move your audio components away from  
the TV.  
• Depending on the DIGITAL MEDIA  
PORT adapter, video output may not be  
possible.  
The surround effect cannot be  
obtained.  
• Make sure you have selected the sound  
field for movie or music mode (page 43).  
• Sound fields do not function for signals  
with a sampling frequency of more than  
48 kHz.  
Dolby Digital or DTS multi channel  
sound is not reproduced.  
• Check that the DVD, etc. you are playing  
is recorded in Dolby Digital or DTS  
format.  
• When connecting the DVD player, etc., to  
the digital input jacks of this receiver,  
check the audio setting (the settings for the  
audio output) of the connected component.  
For example, when connecting the  
“PlayStation 3”, set the BD/DVD audio  
output format to “Bitstream” on the  
“PlayStation 3”.  
The source image input to the VIDEO IN  
or COMPONENT VIDEO IN jacks is not  
output from the TV.  
• Check that your component is connected  
to the MONITOR OUT jack (page 20).  
• Make sure “CTRL.HDMI” is set to  
“CTRL OFF” in HDMI menu (page 58).  
The source image input to the HDMI  
jack is not output from the TV.  
• Check the HDMI connection (page 23).  
• Depending on the playback component,  
you may need to set up the component.  
Refer to the operating instructions  
supplied with each component.  
• Set “AUDIO.OUT” to “AMP” in the  
HDMI menu.  
• Be sure to use a High Speed HDMI cable  
when you view images or listen to sound  
during Deep Colour (Deep color)  
transmission.  
Recording cannot be carried out.  
• Check that the components are connected  
correctly.  
72GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording cannot be carried out.  
• Check that the components are connected  
correctly.  
RDS does not work.*  
• Make sure that you are tuned to an FM  
RDS station.  
• Select the source component using the  
• Select a stronger FM station.  
The RDS information that you want  
does not appear.*  
• Contact the radio station and find out  
whether they actually provide the service  
in question. If so, the service may be  
temporarily out of order.  
Tuner  
The FM reception is poor.  
• Use a 75-ohm coaxial cable (not supplied)  
to connect the receiver to an outdoor FM  
antenna (aerial) as shown below. If you  
connect the receiver to an outdoor antenna  
(aerial), ground it against lightning. To  
prevent a gas explosion, do not connect the  
ground (earth) wire to a gas pipe.  
* Models of area code ECE, CEK, AU1 only.  
Control for HDMI  
The Control for HDMI function does not  
work.  
Outdoor FM antenna (aerial)  
• Make sure “CTRL.HDMI” is set to  
“CTRL ON” in the HDMI menu (page  
Receiver  
AM  
• Make sure the connected component is  
compatible with the Control for HDMI  
function.  
Ground (earth)  
wire (not supplied)  
ANTENNA  
• Check the Control for HDMI settings on  
the connected component. Refer to the  
operating instructions of the connected  
component.  
• Repeat the procedures of “Preparing for  
HDMI connection, connect/disconnect the  
AC power cord (mains lead), or when  
there is a power failure (page 47).  
To ground  
Radio stations cannot be tuned in.  
• Check that the antennas (aerials) are  
connected securely. Adjust the antennas  
(aerials) and connect an external antenna  
(aerial), if necessary.  
• The signal strength of the stations is too  
weak (when tuning in with automatic  
tuning). Use direct tuning.  
• Make sure you set the tuning interval  
correctly (when tuning in AM stations  
with direct tuning).  
• No stations have been preset or the preset  
stations have been cleared (when tuning  
by scanning preset stations). Preset the  
• Press DISPLAY repeatedly so that the  
frequency appears on the display.  
continued  
73GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
No sound is output from the receiver  
and TV speaker while using the System  
Audio Control function.  
• Make sure the TV is compatible with the  
System Audio Control function.  
• If the TV does not have System Audio  
Control function, set the “AUDIO.OUT”  
settings in HDMI menu to  
– “TV+AMP” if you want to listen to the  
sound from the TV speaker and receiver.  
– “AMP” if you want to listen to the sound  
from the receiver.  
Remote commander  
The remote does not function.  
• Point the remote at the remote sensor on  
the receiver.  
• Remove any obstacles in the path between  
the remote and the receiver.  
• Replace all the batteries in the remote with  
new ones, if they are weak.  
• Make sure you select the correct input on  
the remote.  
• When you connect the receiver to a video  
component (projector, etc.), sound may  
not be output from the receiver. In this  
case, select “AMP”.  
• If you cannot listen to the sound of a  
component connected to the receiver  
– Select appropriate input (BD, DVD,  
SAT/CATV) when you want to watch a  
program on a component connected via  
HDMI connection to the receiver.  
– Change the TV channel when you want  
to watch a TV broadcast.  
Others  
The receiver is turned off  
automatically.  
• The “AUTO.STBY” function is working  
– Select the component or input you want  
to watch when you watch a program on  
the component connected to the TV.  
Refer to the operating instructions of the  
TV on this operation.  
Error messages  
If there is a malfunction, the display shows a  
message. You can check the condition of the  
system by the message. See the following table  
to solve the problem. If any problem persists,  
consult your nearest Sony dealer.  
When the receiver is in standby mode,  
there is no image or sound on the TV.  
• When the receiver is in standby mode,  
image and sound are output from the  
HDMI component selected the last time  
you turned off the receiver. If you are  
enjoying other component, play the  
component and perform the One-Touch  
Play operation, or turn on the receiver to  
select the HDMI component you want to  
enjoy.  
• Make sure “PASS.THRU” is set to “ON”  
in the HDMI menu if you connect  
components not compatible with the  
“BRAVIA” Sync to the receiver (page 64).  
If an error message appears while you perform  
appear” (page 32) to solve the problem.  
PROTECTOR  
Irregular current is output to the speakers, or  
the upper panel of the receiver is covered  
with something. The receiver will  
automatically turn off after a few seconds.  
Check the speaker connection and turn on  
the power again.  
74GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
If you are unable to remedy the  
problem using the  
Specifications  
troubleshooting guide  
AUDIO POWER  
SPECIFICATIONS  
Clearing the receiver’s memory may remedy  
the problem (page 30). However, note that all  
memorized settings will be reset to their initial  
settings and you will have to readjust all  
settings on the receiver.  
POWER OUTPUT AND TOTAL  
HARMONIC DISTORTION:  
(Models of area code U2 only)  
With 8 ohm loads, both channels driven, from  
20 – 20,000 Hz; rated 90 watts per channel  
minimum RMS power, with no more than  
0.09% total harmonic distortion from 250  
milliwatts to rated output.  
If the problem persist  
Consult your nearest Sony dealer. Note that if  
service personnel changes some parts during  
repair, these parts may be retained.  
Amplifier section  
Models of area code U2  
1)  
Minimum RMS Output Power  
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)  
90 W + 90 W  
Stereo Mode Output Power  
(8 ohms, 1 kHz, THD 1%)  
Reference sections for clearing  
the receiver’s memory  
To clear  
See  
100 W + 100 W  
Surround Mode Output Power  
(8 ohms, 1 kHz, THD 10%)  
All memorized settings  
Customized sound fields  
2)  
130 W per channel  
1)  
Models of area code CA2, ECE, CEK, AU1  
Minimum RMS Output Power  
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)  
85 W + 85 W  
Stereo Mode Output Power  
(8 ohms, 1 kHz, THD 1%)  
100 W + 100 W  
2)  
Surround Mode Output Power  
(8 ohms, 1 kHz, THD 10%)  
130 W per channel  
1)Measured under the following conditions:  
Area code  
U2, CA2  
Power requirements  
120 V AC, 60 Hz  
ECE, CEK, AU1  
230 V AC, 50 Hz  
2)Reference power output for front, center and  
surround speakers. Depending on the sound field  
settings and the source, there may be no sound  
output.  
continued  
75GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Frequency response  
Analog  
Video section  
Inputs/Outputs  
10 Hz – 70 kHz,  
+0.5/–2 dB (with sound  
field and equalizer  
bypassed)  
Video:  
1 Vp-p, 75 ohms  
COMPONENT VIDEO:  
Y: 1 Vp-p, 75 ohms  
Input  
Analog  
PB/CB: 0.7 Vp-p, 75 ohms  
PR/CR: 0.7 Vp-p, 75 ohms  
80 MHz HD Pass Through  
Sensitivity: 500 mV/  
50 kohms  
S/N3): 96 dB  
(A, 500 mV4))  
General  
Power requirements  
Digital (Coaxial) Impedance: 75 ohms  
S/N: 100 dB  
(A, 20 kHz LPF)  
Area code  
U2, CA2  
ECE, CEK  
AU1  
Power requirements  
120 V AC, 60 Hz  
Digital (Optical) S/N: 100 dB  
(A, 20 kHz LPF)  
Output (analog)  
230 V AC, 50/60 Hz  
230 V AC, 50 Hz  
AUDIO OUT  
Voltage: 500 mV/  
10 kohms  
Power output (DIGITAL MEDIA PORT)  
SUBWOOFER  
Voltage: 2 V/1 kohm  
DC OUT:  
5V, 0.7A MAX  
Equalizer  
Gain levels  
6 dB, 1 dB step  
Power consumption  
Area code  
Power consumption  
3)INPUT SHORT (with sound field and equalizer  
bypassed).  
U2, CA2, ECE, CEK, 230 W  
AU1  
4)Weighted network, input level.  
Dimensions (width/height/depth) (Approx.)  
FM tuner section  
Tuning range  
87.5 MHz – 108.0 MHz  
FM wire antenna (aerial)  
430 mm × 157.5 mm ×  
322 mm (17 in × 6 1/4 in ×  
12 3/4 in) including  
projecting parts and  
controls  
Antenna (aerial)  
Antenna (aerial) terminals  
75 ohms, unbalanced  
Intermediate frequency  
10.7 MHz  
Mass (Approx.)  
7.4 kg (16 lb 6 oz)  
For details on the area code of the  
component you are using, see page 5.  
AM tuner section  
Tuning range  
Design and specifications are subject to  
change without notice.  
Area code  
Tuning scale  
10 kHz step 9 kHz step  
U2, CA2  
530 kHz –  
1,710 kHz  
531 kHz –  
1,710 kHz  
• Standby power consumption: 0.3 W  
• Halogenated flame retardants are not used  
in the certain printed wiring boards.  
ECE, CEK, AU1  
531 kHz –  
1,602 kHz  
Antenna (aerial)  
Loop antenna (aerial)  
Intermediate frequency  
450 kHz  
76GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Numerics  
I
S
Satellite tuner  
Sound fields  
Speakers  
Super Audio CD Player  
A
M
Menu  
B
Blu-ray disc player  
C
T
Cable TV tuner  
CD Player  
Clear  
Theater/Theatre Mode Sync  
N
Tuner  
Tuning  
TV  
O
D
DIGITAL MEDIA PORT  
P
“PlayStation 3”  
DVD player  
DVD recorder  
V
VCR  
R
Recording  
onto a recording media  
E
H
HDMI  
77GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(1)  
Sony Corporation Printed in Malaysia  
Download from Www.Somanuals.com. All Manuals Search And Download.  

SharkRack Surge Protector PWS 42115 User Manual
Shure Automobile Parts a15HP User Manual
SIIG Log Splitter 04 0945A User Manual
Sony Car Stereo System CA440 User Manual
Sony Computer Monitor PFM 500A2WU PFM 500A2WE PFM 500A2WJ User Manual
Sony MP3 Player D NE509 User Manual
Sony Personal Computer PCV 2236 User Manual
Sony Portable CD Player CDX CA600 User Manual
Stanton CD Player S 450 User Manual
Stiga Lawn Mower 11 3203 26 User Manual