2003 SONY MOBILE
PRODUCT GUIDE
1600W max power
500W x 1 RMS into 4W, 20Hz - 300Hz @ 0.2% THD
900W x 1 RMS into 2W, 20Hz - 300Hz @ 0.6% THD
Class D
Variable 50 - 300Hz 12dB/oct Low Pass Filter
40Hz EQ Boost
RCA & Speaker Level Inputs
XM-D1000P5
Monaural Power Amplifier
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
500 watts minimum continuous average power into 4 ohms, 20 Hz to
300 Hz with no more than 0.2% total harmonic distortion per Car
Audio Ad Hoc Committee standards.
Other Specifications
Circuit system
Inputs
Class D Technology
Pulse power supply
RCA pin jacks
High level input connector
Speaker terminals
Through out pin jacks
2 8W
1,000 W (at 4W)
1,600 W (at 2W)
Outputs
Suitable speaker impedance
Maximum outputs
Rated outputs (supply voltage at 14.4 V)
500 W (20 300 Hz, 0.2% THD, at 4W)
900 W (20 300 Hz, 0.6% THD, at 2W)
5 300 Hz ( +0.5 dB, -3 dB)
0.06% or less (at 100 Hz, 4W)
0.3 6.0 V (RCA pin jacks)
1.2 12.0 V (High level input)
50 300 Hz, 12 dB/oct
Frequency response
Harmonic distortion
Input level adjustment range
Low-pass filter
Low boost
0 10 dB (40 Hz)
Power requirements
Power supply voltage
Current drain
12 V DC car battery (negative ground)
10.5 - 16 V
at rated output : 90 A (2W)
Remote input : 2 mA
Dimensions
Approx. 347 × 57 × 339 mm (w/h/d)
(13 3/4 × 2 1/4 × 13 3/8 in.) (w/h/d) not incl.
projecting parts and controls
Approx. 3.8 kg (8 lb. 6 oz.) not incl. accessories
Mounting screws (5)
Mass
Supplied accessories
High level input cord (1)
Protection cap (1)
Design and Specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
|