3-095-517-11(1)
Micro HI-FI
Component System
Operating Instructions
Owner’s Record
e model and serial numbers are located on the rear of the unit. Record
these numbers in the space provided below. Refer to them whenever you call
upon your Sony dealer regarding this product.
Model No. ______________ Serial No. ______________
CMT-HX7BT
© 2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Music discs encoded with copyright
protection technologies
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
is product is designed to playback
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some record
companies. Please be aware that among
those discs, there are some that do not
conform to the CD standard and may not
be playable by this product.
is equipment must not be co-located or
operated in conjunction with any other
antenna or transmitter.
is equipment complies with FCC
radiation exposure limits set forth for
uncontrolled equipment and meets the
FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65.
is equipment has a very low RF energy
level that is deemed to comply with
FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65
without maximum permissive exposure
evaluation (MPE). But it is desirable that
it should be installed and operated with at
least 20cm and more between the radiator
and person’s body (excluding extremities:
hands, wrists, feet and legs).
e Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sony
Corporation is under license. Other
trademarks and trade names are those
of their respective owners.
MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and omson.
e XM name and related logos are
registered trademarks of XM Satellite
Radio Inc.
(c) 2006 SIRIUS Satellite Radio Inc.
“SIRIUS” and the SIRIUS dog logo
are registered trademarks of SIRIUS
Satellite Radio Inc.
Note on DualDiscs
A DualDisc is a two sided disc product
which mates DVD recorded material on
one side with digital audio material on
the other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback on
this product is not guaranteed.
TM and marks are omitted in this
®
manual.
ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to parts and controls
is manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit (HCD-HX7/Compact Disc Receiver)
Front panel
Top panel
Continued
ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote (RM-SCR32)
BLUETOOTH indicator (page 22,
23)
Lights up when the Bluetooth function
is active.
Remote sensor (page 29)
BLUETOOTH OPR button (page
20, 22, 23)
Press to make a connection,
disconnection, or pairing with a
Bluetooth device.
Unit: VOLUME control (page 14,
15, 16, 20, 23, 24)
Remote: VOLUME +/ button
(page 14, 15, 16, 20, 23, 24)
Turn or press to adjust the volume.
AUDIO IN jack (page 24)
Connect to an optional audio
component.
PHONES jack
Connect the headphones.
Unit: (open/close) button
(page 14)
/ (power) button (page 13, 28,
31)
Press to turn on the system.
Remote: OPEN/CLOSE button
(page 14)
Press to open or close the disc tray.
STANDBY indicator (page 25, 29)
Lights up when the system is turned off.
ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback buttons and function
buttons
Unit: BLUETOOTH (play/
pause) button (page 19, 20)
Press to select the Bluetooth function.
Press to start or pause playback of the
music on the Bluetooth device (Bluetooth
mobile phone, etc.).
ENTER button (page 13, 16, 26,
27, 28)
Press to enter the settings.
/ (go back/go forward)
button (page 14, 20, 26)
Press to select a track or file.
Unit: CD (play/pause)
Unit: TUNE +/ (tuning) button
(page 15, 16)
Remote: +/ (tuning) button
(page 15, 16, 27)
Press to tune in the desired station.
button (page 14)
Press to select the CD function.
Press to start or pause playback of a disc.
Remote: CD button (page 14)
Press to select the CD function.
+/ (select folder) button
(page 14, 26)
Press to select a folder.
Remote: (play) button,
(pause) button
Press to start or pause playback.
Unit: CAT +/ (category) button
(page 16)
Remote: CATEGORY +/ button
(page 16)
Press to select a satellite radio category.
TUNER/BAND button (page 15,
16)
Press to select the TUNER function.
Press to switch among FM, AM, XM and
SIRIUS band.
/ (rewind/fast forward)
button (page 14, 20)
Press to find a point in a track or file.
AUDIO IN button (page 24)
Press to select the AUDIO IN function.
FUNCTION button (page 22, 23)
Press to select the function.
PLAY MODE/TUNING MODE
button (page 14, 15, 16, 26, 27)
Press to select the play mode of a CD or
MP3 disc.
Unit: /CANCEL (stop/cancel)
button (page 14, 15, 19, 20, 22)
Remote: (stop) button (page
14, 15, 19, 20, 22)
Press to select the tuning mode.
Press to stop playback.
Press to cancel search.
Sound buttons (page 24)
Unit: DSGX button
Remote: EQ button
Press to select the sound effect.
SEARCH button (page 14)
Press to enter or exit search mode.
Continued
ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY button (page 20, 25)
CLEAR button (page 17, 20, 22,
26)
Press to change the information on the
display.
Press to delete a pre-programmed track
or file.
Press to delete a SIRIUS Parental Lock
password entry.
Press to erase the pairing registration
information of the Bluetooth device.
Satellite radio buttons
XM button (page 16)
Press to select XM band.
SIRIUS button (page 16)
Number buttons (page 14, 16, 19)
Press to select SIRIUS band.
Press to select a track, file or satellite
channel.
Press to enter a SIRIUS Parental Lock
password.
TUNER MEMORY button (page
27)
Press to preset the radio station.
Press to enter a Bluetooth passcode.
FM MODE button (page 15)
Press to select the FM reception mode
(monaural or stereo).
CLOCK/TIMER SELECT button
(page 28)
CLOCK/TIMER SET button (page
13, 28)
Press to set the clock and the Play Timer.
Battery compartment lid
(page 11)
SLEEP button (page 28)
Press to set the Sleep Timer.
REPEAT button (page 14)
Press to listen to a disc, a single track or
file repeatedly.
ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Information on the display
Play/Pause
Audio format
DSGX (page 24)
Play mode (page 14)
Tuner reception mode (page 15)
Tuner reception (page 15)
Timer (page 28)
Text information
ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system securely
Wall socket
Wall socket
Right speaker
Left speaker
or
SiriusConnect Home tuner (not supplied)
Speakers
Satellite Radio Home Antenna (not supplied)*
AC power adaptor (not supplied)*
DIN cable (not supplied)*
Power
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
XM Mini-Tuner and Home Dock (not supplied)
FM lead antenna (Extend it horizontally.)
White side for North American model
Brown side for other regions
AM loop antenna
*
Supplied with SiriusConnect Home tuner
FM/AM antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords and the power cord to avoid
picking up noise.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker pads
XM antenna
Attach the supplied speaker pads to
the bottom of the speakers to prevent
slipping.
Connect the XM Mini-Tuner and Home
Dock. For details, see “To receive the XM
Satellite Radio” (page 12).
SIRIUS Tuner
Connect the SiriusConnect Home tuner.
When you use the SiriusConnect Home
tuner with this system, be sure to connect
the AC power adaptor supplied with the
tuner to a wall socket. For details, see
“To receive the SIRIUS Satellite Radio”
(page 12).
Keep the SiriusConnect Home tuner,
antenna, and AC power adaptor away
from the speaker cords and the power
cord to avoid picking up noise.
To use the remote
Slide and remove the battery
compartment lid , and insert the two
supplied R6 (size AA) batteries, side
first, matching the polarities shown
below.
When carrying this system
1
2
3
Remove a disc to protect the CD
mechanism.
Press CD
function.
to select the CD
Hold down SEARCH
and press
on the unit,
on the unit until
“STANDBY”appears.
4
After “LOCK”appears, unplug the
power cord.
Notes
With normal use, the batteries should last for
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
Continued
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Activation normally takes 10 to 15 minutes,
but during peak busy periods you may need to
keep your XM Ready home audio system on
for up to an hour. When you can access the full
channel lineup on your XM Ready home audio
system you are done.
To receive the XM Satellite Radio
ABOUT XM SATELLITE RADIO
XM offers over 170 digital radio channels: the
most commercial-free music channels, premier
news, sports, talk, and traffic and weather in
21 metro markets. XM’s on-air hosts broadcast
live from studios in Washington, D.C., New
York City and Nashville.
To receive the SIRIUS Satellite Radio
For more information or to subscribe in the
US, visit xmradio.com or call Listener Care at
1-800-XMRADIO (1-800-967-2346).
SIRIUS Satellite Radio: The Best Radio
On Radio
SIRIUS brings all your favorite entertainment
including 100% commercial-free music, plus
superior sports coverage, uncensored talk and
comedy, world-class entertainment, news,
weather and more for your car, home or office.
XM READY® LEGAL
XM monthly service subscription sold
separately. XM Mini-Tuner and Home Dock
required (each sold separately) to receive
XM service. Installation costs and other fees
and taxes, including a one-time activation
fee may apply. Subscription fee is consumer
only. All fees and programming subject to
change. Channels with frequent explicit
language are indicated with an XL. Channel
blocking is available for XM radio receivers by
calling 1-800-XMRADIO (1-800-967-2346).
For a full listing of the XM commercial-free
channels and advertising supported channels,
visit lineup.xmradio.com. Subscriptions
subject to Customer Agreement available at
xmradio.com. XM service only available in
the 48 contiguous United States. XM Satellite
Radio and XM Ready are trademarks of XM
Satellite Radio Inc. (C)2006 XM Satellite Radio
Inc. All rights reserved.
Sirius is available in the US for subscribers
with addresses in the continental US and is
available in Canada for subscribers with a
Canadian address. Required subscription
plus compatible SiriusConnect Home Tuner
with antenna are required and sold separately.
SIRIUS Programming is subject to change.
Visit sirius.com or siriuscanada.ca for the most
complete and up-to-date channel lineup and
product information. “SIRIUS” and the SIRIUS
dog logo and related marks are trademarks of
Sirius Satellite Radio Inc. All rights reserved.
To Subscribe to SIRIUS Satellite Radio
Purchase and connect a SiriusConnect Home
Tuner to your Sirius Ready home audio system.
You are then ready to activate and subscribe to
Sirius by either calling 1.888.539.SIRIUS (7474)
or log on to sirius.com. It is that easy.
XM READY® SUBSCRIPTIONS
Once you have installed the XM Mini-Tuner
Dock, inserted the XM Mini-Tuner, connected
the XM Dock to your XM Ready home audio
®
system, and installed the antenna, you are
ready to subscribe and begin receiving XM
programming. ere are three places to find
your eight character XM Radio ID: on the XM
Mini-Tuner, on the XM Mini-Tuner package,
and on XM Channel 0. Record the Radio ID in
the following eight squares for reference.
Note: e XM Radio ID does not use the
letters “I”, “O”, “S” or “F”. Activate your XM
Satellite Radio service in the U.S. online at
RADIO (1-800-967-2346). You will need a
major credit card. XM will send a signal from
the satellites to activate the full channel lineup.
1ꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
Use buttons on the remote to set the
clock.
1
2
Press /
system.
to turn on the
.
Press CLOCK/TIMER SET
If the current mode appears on
the display, press /
repeatedly to select “CLOCK SET?”
.
and then press ENTER
repeatedly
to set the hour, and then press
3
4
Press /
.
ENTER
Use the same procedure to set
the minutes.
e clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is off
Press DISPLAY . e clock is displayed
for about 8 seconds.
1ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operation
Basic Operations
To
Press
Pause playback (or CD on the
unit) . To resume
Playing a CD/MP3 disc
play, press the button
again.
1
Select the CD function.
.
Stop playback
Press CD
.
Select a folder
on an MP3
disc
Select a track /
or file number buttons
then press ENTER ).
+/
.
2
Place a disc.
Press OPEN/CLOSE , and place
a disc with the label side up on the
disc tray.
(or the
,
Select a folder SEARCH . Press
and file on
/
to select
an MP3 disc the desired folder, then
to select
while viewing press ENTER . Press
the folder and /
file names on the desired file, then
.
the display
press ENTER
Find a point in Hold down /
To close the disc tray, press OPEN/
a track or file
during playback, and
CLOSE
again.
release the button at the
desired point.
Do not force the disc tray closed with
your finger, as this may damage the
unit.
Select Repeat REPEAT
repeatedly
Play
until “REP” or “REP1”
appears.
3
4
Start playback.
Press (or CD on the unit)
.
To change the play mode
Press PLAY MODE
repeatedly while
Adjust the volume.
the player is stopped. You can select
normal play (“ *” for all MP3 files
in the folder on the disc), shuffle play
Press VOLUME +/ (or turn the
.
VOLUME control on the unit)
(“SHUF” or “
play (“PGM”).
(SHUF)
Play performs the same operation as normal
(shuffle) play.
SHUF*”), or program
*
When playing a CD-DA disc,
Notes on Repeat Play
All tracks or files on a disc are played
repeatedly up to five times.
“REP1” indicates that a single track or file is
repeated until you stop it.
1ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on playing MPꢁ discs
Do not save other types of files or
unnecessary folders on a disc that has MP3
files.
Listening to the radio
Folders that have no MP3 files are skipped.
MP3 files are played back in the order that
they are recorded onto the disc.
Listening to FM or AM
e system can only play MP3 files that have
1
2
Select “FM”or “AM.”
Press TUNER/BAND
a file extension of “.MP3”.
repeatedly.
If there are files on the disc that have the
“.MP3” file extension, but that are not MP3
files, the unit may produce noise or may
malfunction.
e maximum number of:
folders is 255 (including the root folder).
MP3 files is 511.
MP3 files and folders that can be
contained on a single disc is 512.
folder levels (the tree structure of files) is
8.
Compatibility with all MP3 encoding/writing
soſtware, recording device, and recording
media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted
audio or may not play at all.
Select the tuning mode.
Press TUNING MODE
until “AUTO” appears.
repeatedly
3
Tune in the desired station.
Press +/ (or TUNE +/ on
the unit) . Scanning stops
automatically when a station is tuned
in, and then “TUNED” and “ST” (for
stereo programs only) appear.
Notes on playing multisession discs
4
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
If the disc begins with a CD-DA (or MP3)
session, it is recognized as a CD-DA (or
MP3) disc, and other sessions are not played
back.
.
A disc with a mixed CD format is recognized
as a CD-DA (audio) disc.
To stop automatic scanning
.
Press
To tune in a station with a weak signal
If “TUNED” does not appear and the
scanning does not stop, press TUNING
MODE
repeatedly until “AUTO” and
“PRESET” disappear, and then press
+/ (or TUNE +/ on the unit)
repeatedly to tune in the desired station.
To reduce static noise on a weak FM
stereo station
Press FM MODE
repeatedly until
“MONO” appears to turn off stereo
reception.
Continued
1ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To check your XM Radio ID or SIRIUS ID
number
Listening to satellite radio
Press the number button 0 , then press
You can operate and listen to XM or
SIRIUS satellite radio by connecting an
optional antenna or tuner. Before using
the system, connect the XM Mini-Tuner
and Home Dock or the SiriusConnect
Home tuner to the system. See “Hooking
up the system securely” (page 10) for
details about connection.
ENTER
to select channel 0.
Notes
If you select a channel using the number
buttons
in Category mode, the tuning
mode changes automatically to All Channel
mode.
You cannot select a SIRIUS channel using
+/ (or TUNE +/ on the unit)
if the
Parental Lock is set for the channel.
1
2
3
4
Select “XM”or “SIRIUS.”
Press XM or SIRIUS
(or TUNER/
BAND
repeatedly).
Restricting access to specific
channels (SIRIUS only)
Parental Lock
Select the All Channel mode.
Press TUNING MODE
repeatedly
until “CAT” and “PRESET” disappear.
Tune in the desired channel.
You can restrict access to certain
channels using your own password. e
password is set to “0000” as the default.
Change the password before you use
this function for the first time (see “To
change the password”).
Press +/ (or TUNE +/ on the
unit)
repeatedly.
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
1
Select “SIRIUS.”
Press SIRIUS
(or TUNER/BAND
To select a channel by Category mode
repeatedly).
(or TUNER/
repeatedly).
1
2
3
4
Press XM or SIRIUS
BAND
2
3
Tune in the desired channel (see
“Listening to satellite radio”).
Press TUNING MODE
until “CAT”appears.
repeatedly
Press TUNER MEMORY
repeatedly until “Lock?”appears,
Press CATEGORY +/ (or CAT +/ on
the unit)
repeatedly.
.
then press ENTER
“Enter Code” appears.
Press +/ (or TUNE +/ on the unit)
repeatedly.
4
Enter your 4-digit password
using the number buttons
.
To select a channel using the number
buttons
“Complete!” appears and the Parental
Lock is set.
Enter the 3 digits of the desired channel
using the number buttons , then press
.
ENTER
1ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
To delete the numbers you have
entered
When you select a channel using +/ (or
TUNE +/ on the unit)
mode or Category mode, locked channels are
skipped.
in All Channel
Press CLEAR
repeatedly.
To change the password
e display will return to the original
indication if you press
or if no entry is
(or TUNER/BAND
1
Press SIRIUS
made for a set period of time aſter you have
been prompted to enter the password.
repeatedly) to select “SIRIUS.”
When the system is reset to the factory
settings, the Parental Lock password returns
to the default (“0000”), but Parental Lock
settings are not removed.
2
Press TUNER MEMORY
repeatedly
until “Edit Code?”appears, then press
.
ENTER
You cannot preset locked channels.
“OLD Code” appears.
If you set the Parental Lock for a preset
channel, the preset information for that
channel returns to the default.
You cannot set the Parental Lock for channels
0 or 184.
3
Enter your current 4-digit password
using the number buttons
.
“NEW Code” appears.
4
5
Enter a new 4-digit password using
the number buttons
.
To confirm your new password, re-
enter it using the number buttons
.
“Complete!” appears and the new
password is set.
To listen to the locked channels
(or TUNER/BAND
repeatedly) to select “SIRIUS.”
1
Press SIRIUS
2
Select a locked channel you want to
listen to using the number buttons
.
“Enter Code” appears.
3
Enter your 4-digit password using
the number buttons
e channel is tuned in.
.
To remove the Parental Lock
1
When the locked channel is tuned in,
press TUNER MEMORY
repeatedly
until “Unlock?”appears.
2
Press ENTER
.
“Complete!” appears and the channel
is unlocked.
1ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to music of a
Bluetooth mobile phone or
Bluetooth device
Using the Bluetooth
function
is system supports Bluetooth A2DP
and AVRCP profiles. For details on
Bluetooth wireless technology, see
“Bluetooth wireless technology” (page
36).
You can listen to music from your
Bluetooth mobile phone or Bluetooth
device over a wireless connection.
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
Follow the procedure below to listen to
music from Bluetooth devices with this
system.
Pairing this system with a Bluetooth
device
Connecting to registered devices
Playing music of a Bluetooth device
For details about the operations of
the Bluetooth device, also refer to the
operation manual supplied with your
Bluetooth device.
1ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Pairing this system with a Bluetooth
device
4
Enter the passcode.
Passcode entry may be required
depending on the type of Bluetooth
device.
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Use the procedure below
to pair the system with your Bluetooth
device. Once a pairing operation is
performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music of
a Bluetooth device” (page 20).
When “PIN?” and a countdown
appear, enter the passcode at the
system as follows:
Press the number buttons
(or
1
Place the Bluetooth device to be
connected to this system within
1 meter of the system.
+/ and /
on the unit)
to enter the same passcode that was
entered at the Bluetooth device, and
.
then press ENTER
Once pairing is completed and the
connection is established, the system
display changes as follows:
2
3
Select the Bluetooth function.
Press BLUETOOTH
the unit.
on
“Connect”
device
Name of the Bluetooth
Operate the Bluetooth device
and perform the pairing
operation.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
When searching for this system with
the Bluetooth device, a list of the
devices found may appear in the
Bluetooth device display depending
on the type of Bluetooth device.
is system appears as “CMT-
HX7BT.”
When establishing a connection with
this system, select the audio profile
(A2DP, AVRCP) at the Bluetooth
device. If the Bluetooth device does
not support the AVRCP profile, you
cannot perform playback or other
operations with the system (page 20).
To cancel passcode entry partway
.
Press
Notes
“Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
is system only supports numerical
passcodes up to 4 digits.
e pairing standby status of the system is
cancelled aſter about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
Continued
1ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To erase all the pairing registration
information
3
4
Start playback.
Press (or BLUETOOTH on
.
the unit)
on the
1
Press BLUETOOTH
unit.
Depending on the Bluetooth device,
you may need to start up the AV
soſtware of the Bluetooth device
beforehand.
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
and hold BLUETOOTH OPR
on
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
.
2
3
Press CLEAR
.
To check the address of a connected
Bluetooth device
“Delete?” appears.
Press DISPLAY
while the Bluetooth
.
Press ENTER
device name appears in the system
display.
e Bluetooth device address appears for
8 seconds.
“Complete!” appears and all the
pairing information is erased.
Note
In order to connect with a Bluetooth device
aſter performing this operation, you must enter
the passcode again.
To cancel the connection with a
Bluetooth device
Press and hold BLUETOOTH OPR
Playing music of a Bluetooth device
on the unit for about 2 seconds until
“Disconnect” appears, or until the
information on the display (device name,
etc.) disappears.
You can operate a Bluetooth device by
connecting the system and a Bluetooth
device using AVRCP. If the system is not
connected with a Bluetooth device using
AVRCP, “Not in Use” appears when you
operate the system.
Other operation
To
Press
1
2
Select the Bluetooth function.
Pause playback (or BLUETOOTH
Press BLUETOOTH
the unit.
on
.
on the unit)
.
Stop playback
Select a file
Find a point in Hold down /
a file
.
/
Establish a connection from the
Bluetooth device.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
.
Note
ese operations may not be available for
certain Bluetooth devices. In addition, the
Once the connection is established,
the system display changes as follows:
actual operations may differ depending on the
connected Bluetooth device.
“Connect”
device
Name of the Bluetooth
ꢀ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on connections with Bluetooth
devices
If you cannot connect with a paired
Bluetooth device, perform the pairing
operation between the system and the
Bluetooth device again.
Listening to music on this
system using Bluetooth
headphones
You can listen to music played on this
system using your Bluetooth headphones
over a wireless connection.
Depending on the type of Bluetooth device,
you can adjust the volume using the controls
of the Bluetooth device.
When BLUETOOTH
on the unit
is pressed while connected to Bluetooth
headphones, it may take some time until
a connection is made to the system from
another Bluetooth device.
Follow the procedure below to listen
to music on this system with Bluetooth
headphones.
Pairing this system with Bluetooth
headphones
Connecting to registered headphones
Playing music on this system
For details about the operations of the
Bluetooth headphones, also refer to the
operation manual supplied with your
Bluetooth headphones.
Continued
ꢀ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Pairing this system with Bluetooth
headphones
To cancel passcode entry partway
.
Press
Pairing is an operation where Bluetooth
devices register with each other
Notes
“Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
is system only supports numerical
passcodes up to 4 digits.
e pairing standby status of the system is
cancelled aſter about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
beforehand. Use the procedure below
to pair the system with your Bluetooth
headphones. Once a pairing operation
is performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music on
this system” (page 23).
1
Select a function other than the
Bluetooth function.
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
Press FUNCTION
repeatedly.
Pairing may not be possible if other
Bluetooth devices are present around the
system. In this case, turn off the other
Bluetooth devices.
2
Place the Bluetooth
headphones to be connected
to this system within 1 meter of
the system.
To erase all the pairing registration
information
3
4
Put the Bluetooth headphones
in pairing mode.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
on the
1
Press BLUETOOTH
unit.
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
Press and hold BLUETOOTH
and hold BLUETOOTH OPR
on
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
OPR
on the unit for about 7
seconds until the BLUETOOTH
indicator
flashes.
.
2
3
Press CLEAR
Sound output from the speakers is
stopped.
“Delete?” appears.
.
Press ENTER
“Complete!” appears and all the
pairing information is erased.
5
Enter the passcode.
Follow the same procedure as in
step 4 of “Pairing this system with a
Bluetooth device” (page 19).
Note
To connect with Bluetooth headphones aſter
performing this operation, you must enter the
passcode again.
Once pairing is completed and the
connection is established, the system
display changes as follows:
“Connect”
device
Name of the Bluetooth
ꢀꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing music on this system
To cancel the connection with
Bluetooth headphones
You can operate this system from
Bluetooth headphones by connecting the
system and Bluetooth headphones using
AVRCP.
Press and hold BLUETOOTH OPR
on the unit for about 2 seconds until the
BLUETOOTH indicator
turns off.
Notes
1
Select a function other than the
Bluetooth function.
If you cannot connect with paired Bluetooth
headphones, perform the pairing operation
between the system and the Bluetooth
headphones again.
Press FUNCTION
repeatedly.
2
Establish a connection with the
Bluetooth headphones.
When the system is changed to a function
other than the Bluetooth function and
BLUETOOTH OPR
on the unit is pressed
Press and hold BLUETOOTH OPR
while connected to a Bluetooth device, it may
take some time until a connection is made
with the Bluetooth headphones.
on the unit for about 2 seconds
until the BLUETOOTH indicator
lights up, then release the button.
is system stores separate volume settings
If more than one Bluetooth device
for when listening through the speakers
or PHONES jack
on the unit, or when
that has been connected in the past
is present around the system, the
system attempts to connect with up
to 3 most recently connected devices.
(Connection is attempted with up
to 3 devices in order from the most
recently connected device, and the
attempts end when a connection is
established.)
listening through Bluetooth headphones.
Once the connection is established,
the system display changes as follows:
“Connect” Name of the Bluetooth
device
3
4
Start playback of the music for
the function selected in step 1.
Depending on the type of Bluetooth
headphones, you can operate this
system (playback, volume control,
etc.) using the headphone’s controls.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
Adjust the volume.
Press VOLUME +/ (or turn the
.
VOLUME control on the unit)
ꢀꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using optional audio
components
Adjusting the sound
To add a sound effect
To
Press
1
Connect additional audio
component to the AUDIO
Generate a
more dynamic
sound
DSGX
on the unit.
IN jack
on the unit using
an audio analog cord (not
supplied).
(Dynamic
Sound
Generator
X-tra)
2
Turn down the volume.
Press VOLUME (or turn the
VOLUME control on the unit)
Set the sound EQ
effect
repeatedly
.
to select “BASS”
or “TREBLE,” and
3
4
5
Select the AUDIO IN function.
then press +/
repeatedly to adjust the
level.
Press AUDIO IN
.
Start playing the connected
component.
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
ꢀꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the display
To
Press
Change
DISPLAY
repeatedly
information on when the system is on.
the display1)2)
Check the
DISPLAY
when
clock when the the system is off3). e
system is off
clock is displayed for 8
seconds.
1)
For example, you can view CD/MP3 disc
information, such as the track or file number
or folder name during normal play, or
the total playing time while the player is
stopped. You can also view XM or SIRIUS
radio information, such as the channel
name, song title and artist name.
When the system and a Bluetooth device are
connected using the Bluetooth function, you
can view the Bluetooth device address.
2)
3)
e STANDBY indicator
on the unit
lights up when the system is off.
Notes on the display information
Characters that cannot be displayed appear
as “_”.
e following are not displayed:
total playing time for a CD-DA disc
depending on the play mode.
total playing time and remaining playing
time for an MP3 disc.
e following are not displayed correctly:
folder and file names that do not follow
either the ISO9660 Level 1, Level 2 or
Joliet in the expansion format.
e following is displayed:
ID3 tag information for MP3 files when
ID3 version 1 and version 2 tags are used
(up to 62 characters).
ꢀꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press ENTER
to add the track
Other Operations
or file to the program.
“ . ” appears when the total
program time exceeds 100 minutes
for a CD, or when you select a CD
track whose number is 21 or over, or
when you select an MP3 file.
Creating your own
program
(Program Play)
5
6
Repeat steps 3 through 4 to
program additional tracks or
files, up to a total of 25 tracks or
files.
1
2
Press CD
function.
to select the CD
Press PLAY MODE
until “PGM”appears while the
system is stopped.
repeatedly
To play your program of tracks
.
or files, press
e program remains available until
you open the disc tray. To play the
repeatedly
3
Press /
until the desired track or file
number appears.
.
same program again, press
When programming files, press
To cancel Program Play
+/
repeatedly to select the
Press PLAY MODE
repeatedly until
desired folder, and then select the
desired file.
Example: When programming tracks
on a CD
“PGM” disappears while the system is
stopped.
To delete the last track or file of the
program
Press CLEAR
stopped.
while the system is
Selected track or file number Total playing time of
program (including
selected track or file)
ꢀꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
To call up a preset radio
Presetting radio
stations
You can preset your favorite radio
stations and tune them in instantly
by selecting the corresponding preset
number.
Use buttons on the remote to preset
stations.
station, press TUNING MODE
repeatedly until “PRESET”
appears, and then press +/
repeatedly to select the desired
preset number.
Notes on presetting XM or SIRIUS
stations
You cannot preset XM or SIRIUS stations
except when you receive the station.
1
Tune in the desired station (see
“Listening to the radio”(page
15)).
You cannot operate CATEGORY +/ (or
CAT +/ on the unit)
in preset tuning
mode.
If you select a channel using the number
buttons
in preset tuning mode, the tuning
.
2
Press TUNER MEMORY
mode changes automatically to All Channel
mode.
Preset number
3
Press +/
repeatedly to
select your desired preset
number.
If another station is already assigned
to the selected preset number,
the station is replaced by the new
stations.
.
4
5
Press ENTER
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 FM, 10 AM,
20 XM and 20 SIRIUS stations. e
preset stations are retained for about
half a day even if you disconnect
the power cord or if a power failure
occurs.
ꢀꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Select the sound source.
Using the Timers
e system offers two timer functions.
If you use the Play Timer with the Sleep
Timer, the Sleep Timer has priority.
Press /
repeatedly until
the desired sound source appears, and
then press ENTER . e display
shows the timer settings.
Press /
to turn off the
Sleep Timer:
system.
You can fall asleep to music. is
function works even if the clock is not
set.
e system turns on 15 seconds
before the preset time. If the system is
on at the preset time, the Play Timer
will not play.
Press SLEEP
repeatedly.
If you select “AUTO,” the system
automatically turns off aſter the current
disc stops or in 100 minutes.
Note
Before the system is turned off, if a connection
is made with the Bluetooth headphones,
sounds played by the Play Timer may be output
to the Bluetooth headphones.
Play Timer:
You can wake up to CD or tuner at a
preset time.
Use buttons on the remote to control the
Play Timer. Make sure you have set the
clock.
To activate or check the timer again
Press CLOCK/TIMER SELECT , press
/
repeatedly until “PLAY
SEL?” appears, and then press ENTER
.
1
Prepare the sound source.
Prepare the sound source, and then
To cancel the timer
press VOLUME +/
to adjust the
Repeat the same procedure as above until
“TIMER OFF?” appears, and then press
volume.
To start from a specific track or file,
create your own program (page 26).
.
ENTER
To change the setting
.
2
3
Press CLOCK/TIMER SET
Start over from step 1.
Press /
repeatedly
to select “PLAY SET?,”and then
Tip
e Play Timer setting remains as long as the
setting is not canceled manually.
.
press ENTER
“ON TIME” appears, and the hour
indication flashes.
4
5
Set the time to start playing.
Press /
repeatedly to set
the hour, and then press ENTER
.
e minute indication flashes. Use the
procedure above to set the minutes.
Use the same procedure as in
step 4 to set the time to stop
playing.
ꢀꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Severe hum or noise.
Move the system away from sources of
Others
noise.
Connect the system to a different wall
socket.
Install a noise filter (available
separately) to the power cord.
Troubleshooting
Make sure the power cord and
speaker cords are correctly and firmly
connected.
1
There is no sound.
If the BLUETOOTH indicator
is lit
2
Find your problem in the checklist
below, and take the indicated
corrective action.
If the issue persists, contact your
nearest Sony dealer.
or flashing when a function other than
the Bluetooth function is selected, no
sound is heard through the speakers
or PHONES jack . Press and hold
BLUETOOTH OPR
for about
2 seconds until the BLUETOOTH
indicator
turns off.
If the STANDBY indicator flashes
Immediately unplug the power cord,
and check the following items.
If your system has a voltage
selector, is the voltage selector set to
the correct voltage?
The remote does not function.
Remove any obstacles between the
remote and the remote sensor
on
the unit, and position the unit away
from fluorescent lights.
Are you using only the supplied
speakers?
Point the remote at the system’s sensor.
Move the remote closer to the system.
Is anything blocking the ventilation
holes on the top or back of the
system?
The STANDBY indicator
remains lit
after unplugging the power cord.
Aſter the STANDBY indicator
e STANDBY indicator
may not
stops flashing, reconnect the power
cord, and turn on the system. If the
issue persists, contact your nearest
Sony dealer.
turn off immediately aſter unplugging
the power cord. is is not a
malfunction. e indicator will turn off
aſter about 40 seconds.
CD/MP3 player
General
The sound skips, or the disc will not
play.
Wipe the disc clean, and replace it.
Move the system to a location away
from vibration (for example, on top of
a stable stand).
Move the speakers away from the
system, or place them on separate
stands. At high volume, speaker
vibration may cause the sound to skip.
Sound comes from one channel,
or the left and right volumes are
unbalanced.
Place the speakers as symmetrically as
possible.
Connect only the supplied speakers.
Continued
ꢀꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Play does not start from the first
track.
The sound skips or fluctuates, or the
connection is lost.
e system and the Bluetooth device
are too far apart.
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
Press PLAY MODE
repeatedly until
both “PGM” and “SHUF” disappear to
return to normal play.
Starting playback takes more time
than usual.
e following discs take a longer time
to start playback.
a disc recorded with a complicated
tree structure.
a disc recorded in multisession
mode.
The sound of your Bluetooth device
cannot be heard on this system.
a disc that has not been finalized (a
disc to which data can be added).
a disc that has many folders.
Turn up the volume on your Bluetooth
device first, and then adjust the volume
.
using VOLUME +/
Bluetooth device
Severe hum or noise
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
Pairing cannot be done.
Move the Bluetooth device closer to
the system.
Pairing may not be possible if other
Bluetooth devices are present around
the system. In this case, turn off the
other Bluetooth devices.
Turn down the volume of the
Connection is not possible.
connected Bluetooth device.
e Bluetooth device you attempted
to connect does not support the A2DP
and AVRCP profiles, and cannot be
connected with the system.
Enable the Bluetooth function of the
Bluetooth device.
e pairing registration information
has been erased. Perform the pairing
operation again.
While connected to a Bluetooth device,
this system cannot be detected and a
connection cannot be established from
another Bluetooth device.
The sound from the Bluetooth
headphones is distorted.
Turn down the volume of the system
using VOLUME . If your
headphones have a volume control,
also adjust the volume using the
headphone’s volume control.
Press DSGX
on the unit repeatedly
until “DSGX OFF” appears.
Press EQ
repeatedly to select
“BASS” or “TREBLE,” and then press
level.
repeatedly to turn down the
ꢁ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
To improve tuner reception
Turn off CD player power by using the
CD power management function. By
default, CD power is turned on.
Severe hum or noise, or stations
cannot be received. (“TUNED” or “ST”
flashes on the display.)
repeatedly to
select the CD function, and then turn
off the system.
1
Press FUNCTION
Connect the antenna properly.
Find a location and an orientation that
provide good reception, and then set
up the antenna again.
Keep the antennas, SiriusConnect
Home tuner, and AC adaptor away
from the speaker cords and the power
cord to avoid picking up noise.
Connect a commercially available
external antenna.
Consult your nearest Sony dealer if the
supplied AM antenna has come off the
plastic stand.
2
After “STANDBY”stops flashing, press
/
on the unit while holding
down /CANCEL
on the unit.
“CD POWER OFF” appears. With CD
player power turned off, disc access
time is increased. To turn on CD
player power, repeat the procedure
until “CD POWER ON” appears.
To reset the system to factory settings
Turn off nearby electrical equipment.
If the system still does not operate
properly, reset the system to factory
settings.
The system cannot receive satellite
channels at all.
Check that the XM Mini-Tuner and
Home Dock or the SiriusConnect
Home tuner are connected properly.
e receiving condition is not good.
Move the antenna to the place where
the condition is good.
Check that you subscribed to the
desired satellite radio service (see page
12).
Use buttons on the unit to reset the
system to its factory default settings.
1
Disconnect and reconnect the power
cord, and then turn on the system.
2
Press /CANCEL , DSGX
and
/
at the same time.
All user-configured settings, such as
preset radio stations, SIRIUS Parental
Lock password, timer, and the clock,
are deleted.
To change the AM tuning interval
e AM tuning interval is factory-preset
to 9 kHz (or 10 kHz, for some areas).
Use buttons on the unit to change the
AM tuning interval.
1
Tune in any AM station, and then
turn off the system.
2
While holding down TUNER/BAND
, press /
.
All the AM preset stations are erased.
To reset the interval to the factory
preset, repeat the procedure.
ꢁ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING: e system have not finished
receiving the entire audio data or text
information. Some buttons are not
available.
NO SIGNAL: e receiving condition
is not good. Try moving the antenna
to another location. Make sure the
antenna points south. For details
about the antenna location, see the
instructions supplied with the XM
Mini-Tuner and Home Dock.
Messages
CD/MP3 player, Tuner
Complete!: e preset operation ended
normally.
Invalid: You pressed an invalid button.
LOCKED: e disc tray does not open.
Contact your nearest Sony dealer.
No Disc: ere is no disc in the system,
or you have loaded a disc that cannot
be played.
OFF AIR: e channel is not broadcasted
now.
UPDATING: You have not subscribed for
XM or the channel is not authorized.
You need to subscribe for XM.
– – – – – –: ere is no text information
or time information in the channel.
is is not an error. e text
information may not be displayed
depending on the system condition,
for example, right aſter the system has
received a channel.
No Step: All of the programmed tracks
or files have been erased.
Over: You have reached the end of the
disc while pressing
playback or pause.
during
Push SELECT!: You tried to set the clock
or timer during timer operation.
Push STOP!: You pressed PLAY MODE
during playback.
Reading: e system is reading
information of the disc. Some buttons
are not available.
SET CLOCK!: You tried to select the timer
when the clock is not set.
SET TIMER!: You tried to select the timer
when the Play Timer is not set.
Step Full!: You tried to program more
than 26 tracks or files (steps).
SIRIUS
ANTENNA: e antenna is not connected
properly. Check the connection
between the SiriusConnect Home
tuner and the antenna.
Acquiring: e receiving condition is
not good. Try moving the antenna to
another location. For details about the
antenna location, see the instructions
supplied with the SiriusConnect Home
tuner.
TIME NG!: e Play Timer start and end
times are set to the same time.
XM
Call ꢆꢆꢆ-ꢃꢁꢇ-SIRI: You have not
subscribed for the selected channel.
ANTENNA: e XM Mini-Tuner and
Home Dock are not connected. Check
all the connections, and then turn the
system on again.
CHK SIRIUS: e SiriusConnect Home
tuner is not connected properly.
Check all the connections, and then
turn the system on again. Also make
sure if the AC adaptor supplied with
the SiriusConnect Home tuner is
connected to a wall socket.
CH – – –: You have entered an invalid
channel number. e channel to be
tuned-in is void due to the change by
the broadcast service, or the receiving
condition is not good.
ꢁꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Invalid: You have entered an invalid
channel number. e channel to be
tuned-in is void due to the change by
the broadcast service, or the receiving
condition is not good.
SUB UPDT: You have not subscribed
for SIRIUS or the channel is not
authorized. You need to subscribe for
SIRIUS.
UPDATING: Channel information or
SiriusConnect Home tuner firmware is
being updated.
– – – – – –: ere is no text information
or time information in the channel.
is is not an error. e text
Precautions
Discs that this system CAN play
Audio CD
CD-R/CD-RW (audio data/MP3 files)
Discs that this system CANNOT play
CD-ROM
CD-R/CD-RW other than those
recorded in music CD format or MP3
format conforming to ISO9660 Level
1/Level 2, Joliet or multisession
CD-R/CD-RW recorded in
multisession that have not ended by
“closing the session”
CD-R/CD-RW of poor recording
quality, CD-R/CD-RW that have
scratches or are dirty, or CD-R/CD-
RW recorded with an incompatible
recording device
CD-R/CD-RW which is finalized
incorrectly
Discs containing files other than
MPEG 1 Audio Layer-3 (MP3) files
Discs of non-standard shape (for
example, heart, square, star)
Discs that have adhesive tape, paper, or
sticker attached to them
information may not be displayed
depending on the system condition,
for example, right aſter the system has
received a channel.
Bluetooth device
Connect: Bluetooth communication was
established.
Disconnect: Communication with a
Bluetooth device was cut off for some
reason, or Bluetooth communication
was ended.
No Device: A pairable Bluetooth device
was not found, or connection was not
possible.
Not in Use: e system is not connected
with a Bluetooth device using AVRCP.
PIN?: e system is asking for the
passcode. For details, see “Using the
Bluetooth function” (page 18).
Rental or used discs with attached seals
where the glue extends beyond the seal
Discs that have labels printed using ink
that feels tacky when touched
Notes on discs
Please Wait: e system is readying for
usage of a Bluetooth device.
Before playing, wipe the disc with a
cleaning cloth from the center out to
the edge.
Do not clean discs with solvents, such
as benzine thinner, or commercially
available cleaners or anti-static spray
intended for vinyl LPs.
Do not expose discs to direct sunlight
or heat sources such as hot air ducts,
nor leave it in a car parked in direct
sunlight.
Continued
ꢁꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
On safety
On the speaker system
is speaker system is not magnetically
shielded, and the picture on nearby TV
sets may become magnetically distorted.
In this situation, turn off the TV, wait
15 to 30 minutes, and turn it back on.
If there is no improvement, move the
speakers far away from the TV.
Completely disconnect the power
cord (mains lead) from the wall socket
(mains) if it is not going to be used
for an extended period of time. When
unplugging the unit, always grip the
plug. Never pull the cord itself.
Should any solid object or liquid get
into the system, unplug the system, and
have it checked by qualified personnel
before operating it again.
Cleaning the cabinet
Clean this system with a soſt cloth
slightly moistened with a mild detergent
solution. Do not use any type of abrasive
pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
e AC power cord can be changed
only by a qualified service facility.
On placement
Do not place the system in an inclined
position or in locations that are
extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation,
or subject to vibration, direct sunlight
or a bright light.
Be careful when placing the unit
or speakers on surfaces that have
been specially treated (for example,
with wax, oil, polish) as staining or
discoloration of the surface may result.
If the system is brought directly
from a cold to a warm location or is
placed in a very damp room, moisture
may condense on the lens inside the
CD player, and cause the system to
malfunction. In this situation, remove
the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
On heat buildup
Heat buildup on the unit during
operation is normal and is not cause
for alarm.
Do not touch the cabinet if it has been
used continuously at a high volume
because the cabinet may have become
hot.
Do not obstruct the ventilation holes.
ꢁꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
1)
e actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna’s performance, operating system,
soſtware application, etc.
Bluetooth standard profiles indicate the
purpose of Bluetooth communication
between devices.
Specifications
Main unit (HCD-HX7/Compact Disc
Receiver)
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
2)
(e United States model only)
CD player section
With 6 ohm loads, both channels driven,
from 120 10,000 Hz; rated 50 watts per
channel minimum RMS power, with no
more than 10% total harmonic distortion
from 250 milliwatts to rated output.
System: Compact disc and digital audio
system
Laser Diode Properties
Emission duration: continuous
Laser Output*: Less than 44.6µW
* is output is the value measurement
at a distance of 200mm from the
objective lens surface on the Optical
Pick-up Block with 7mm aperture.
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Amplifier section
Continuous RMS power output
(reference): 50 + 50 watts (6 ohms at
1 kHz, 10% THD)
Inputs:
AUDIO IN (stereo mini jack):
voltage 250 mV, impedance 47
kilohms
Tuner section
FM stereo, FM/AM superheterodyne tuner
Outputs:
PHONES (stereo mini jack): accepts
headphones of 8 ohms or more
SPEAKER: accepts impedance of
6 ohms
FM tuner section:
Tuning range: 87.5 108.0 MHz (100 kHz
step)
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section:
Bluetooth section
Communication system:
Bluetooth Standard version 2.0
Output:
Tuning range:
530 1,710 kHz (with 10 kHz tuning
interval)
Bluetooth Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m1)
Frequency band:
531 1,710 kHz (with 9 kHz tuning
interval)
Antenna: AM loop antenna, external
antenna terminal
2.4 GHz band (2.4000 GHz 2.4835
GHz)
Intermediate frequency: 450 kHz
Modulation method:
FHSS
Compatible Bluetooth profiles2):
A2DP (Advanced Audio Distribution
Profile)
Speaker (SS-CHX7)
Speaker system: 2-way, 2-unit, bass-reflex
type
AVRCP (Audio Video Remote
Control Profile)
Speaker units: Woofer 12 cm, cone type,
Tweeter 4 cm, cone type
Supported codecs:
Nominal impedance: 6 ohms
Dimensions (w/h/d): Approx. 145 × 260 ×
200 mm
Receive: SBC (Sub Band Codec), MP3
Transmit: SBC (Sub Band Codec)
Mass: Approx. 2.2 kg net per speaker
Continued
ꢁꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Power requirements: 120 V AC, 60 Hz
Bluetooth wireless
technology
Bluetooth wireless technology is a short-
range wireless technology linking digital
devices, such as personal computers and
digital still cameras. Using the Bluetooth
wireless technology, you can operate the
units involved within a range of about 10
meters.
Power consumption: 40 watts
Dimensions (w/h/d) (excl. speakers):
Approx. 285 × 120 × 215 mm
Mass (excl. speakers): 2.6 kg
Supplied accessories: Remote Commander
(RM-SCR32) (1), R6 (Size AA) batteries (2),
AM loop antenna (1), FM lead antenna (1),
Speaker pads (8)
Design and specifications are subject to
change without notice.
e Bluetooth wireless technology is
commonly used between two devices,
but a single device can be connected to
multiple devices.
You do not need wires to get connected
as you do with a USB connection, and
you do not need to place the devices face
to face as you do with wireless infrared
technology. You can use the technology
with one Bluetooth device in your bag
or pocket.
Standby power consumption:
0.5 W
Halogenated flame retardants
are not used in the certain
printed wiring boards.
Bluetooth wireless technology is a global
standard supported by thousands of
companies. ese companies produce
products that meet the global standard.
Supported Bluetooth version and
profiles
Profile refers to a standard set of
capabilities for various Bluetooth product
capabilities. is system supports the
following Bluetooth version and profiles.
Supported Bluetooth version:
Bluetooth Standard version 2.0
Supported Bluetooth profiles:
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote
Control Profile)
ꢁꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective communication range
Effects on other devices
Bluetooth devices should be used within
approximately 10 meters (unobstructed
distance) of each other. e effective
communication range may become
shorter under the following conditions.
e radio waves broadcast by this system
may interfere with the operation of some
medical devices. Since this interference
may result in malfunction, always turn
off the power on this system, Bluetooth
mobile phone and Bluetooth device in
the following locations:
When a person, metal object, wall
or other obstruction is between the
devices with a Bluetooth connection
Locations where a wireless LAN is
installed
Around microwave ovens that are in
use
Locations where other electromagnetic
waves occur
In hospitals, on trains, in airplanes,
at gas stations, and any place where
flammable gasses may be present
Near automatic doors or fire alarms
Notes
is system supports security functions that
comply with the Bluetooth specification
as a means of ensuring security during
communication using Bluetooth technology.
However, this security may be insufficient
depending on the setting contents and
other factors, so always be careful when
performing communication using Bluetooth
technology.
Sony cannot be held liable in any way
for damages or other loss resulting from
information leaks during communication
using Bluetooth technology.
Effects of other devices
Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When using your
Bluetooth device near a device with
wireless LAN capability, electromagnetic
interference may occur. is could result
in lower data transfer rates, noise, or
inability to connect. If this happens, try
the following remedies:
Bluetooth communication is not necessarily
guaranteed with all Bluetooth devices that
have the same profile as this system.
Try connecting this system and
Bluetooth mobile phone or Bluetooth
device when you are at least 10
meters away from the wireless LAN
equipment.
Turn off the power to the wireless LAN
equipment when using your Bluetooth
device within 10 meters.
Bluetooth devices connected with this system
must comply with the Bluetooth specification
prescribed by the Bluetooth SIG, Inc., and
must be certified to comply. However, even
when a device complies with the Bluetooth
specification, there may be cases where
the characteristics or specifications of the
Bluetooth device make it impossible to
connect, or may result in different control
methods, display or operation.
Noise may occur or the audio may
cut off depending on the Bluetooth
device connected with this system,
the communications environment, or
surrounding conditions.
ꢁꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Bluetooth
devices
You can check the websites below for the
Bluetooth compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
ꢁꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|