A-CNU-100-11(1)
Color Camera Module
Technical Manual
FCB-EX1010/EX1010P
2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
• The EX-view HADTM CCD features 380,000 (NTSC)
or 440,000 (PAL) effective picture elements and
high-sensitivity shooting. The minimum illumination
required is 1.4 lux (1/60 s (NTSC), 1/50 s (PAL), ICR
OFF).
• Images with a wide dynamic range can be obtained
using the CCD for shooting with a dynamic range and
the LSI system.
• 36× optical zoom (432× with digital zoom)
• Supporting external synchronization (V-lock)
• Images with a high resolution (530 TV lines) can be
obtained using a newly developed DSP for improved
picture quality.
• An infrared (IR) Cut-Filter can be disengaged from
the image path for increased sensitivity in low light
environments. The ICR will automatically engage
depending on the ambient light, allowing the camera
to be effective in day/night environment.
• VISCA is a communications protocol, which enables
the camera to be controlled remotely from a host
computer/controller.
• Six memory locations are provided to temporally
save and recall up to six sets of camera settings.
• Enhanced privacy zone masking (max. 24 blocks)
• A mosaic masking function has been added to the
privacy zone masking function.
• A title composed of up to 11 lines can be set for
displaying on the screen. 20 characters can be used
on one line.
• E-FLIP function
• Alarm function with adjustable detection zones
• Adjustable AE response speed
With consideration given environmental protection,
this module is designed to operate with low power
consumption and also incorporates lead-free and
halogen-free circuit boards.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
In case of abnormal operation, contact your authorized
Sony dealer or the store where you purchased the
product.
Software
Use of the demonstration software developed by Sony
Corporation or use of the software with customer
developed application software may damage hardware,
the application program or the camera. Sony
Corporation is not liable for any damages under these
conditions.
Phenomena specific to CCD image
sensors
The following phenomena that may appear in images
are specific to CCD (Charge Coupled Device) image
sensors. They do not indicate malfunctions.
Operation
Start the camera control software on your computer
after you turn on the camera and the image is
displayed.
White flecks
Although the CCD image sensors are produced with
high-precision technologies, fine white flecks may be
generated on the screen in rare cases, caused by cosmic
rays, etc.
This is related to the principle of CCD image sensors
and is not a malfunction.
Operation and storage locations
Do not shoot images that are extremely bright (e.g.,
light sources, the sun, etc.) for long periods of time. Do
not use or store the camera in the following extreme
conditions:
• Extremely hot or cold places (operating temperature
0 ˚C to +50 ˚C (32 ˚F to 122 ˚F))
• Close to generators of powerful electromagnetic
radiation such as radio or TV transmitters
• Where it is subject to fluorescent light reflections
• Where it is subject to unstable (flickering, etc.)
lighting conditions
The white flecks especially tend to be seen in the
following cases:
• when operating at a high environmental temperature
• when you have raised the master gain (sensitivity)
• when operating in Slow-Shutter mode
Vertical smear
When an extremely bright object, such as a strong
spotlight or flashlight, is being shot, vertical tails may
be produced on the screen, or the image may be
distorted.
• Where it is subject to strong vibration
• Where it is subject to radiation from laser beams
Vertical tails shown on the
image.
Monitor screen
Care of the unit
Remove dust or dirt on the surface of the lens with a
blower (commercially available).
Bright object
(e.g. strong spotlight,
strong reflected light,
flashlight, the sun)
Other
Aliasing
Do not apply excessive voltage. (Use only the
specified voltage.) Otherwise, you may get an electric
shock or a fire may occur.
When fine patterns, stripes, or lines are shot, they may
appear jagged or flicker.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Locations of Controls
Front
Top
Back
Bottom
1 Lens
4 TELE button
7 Tripod screw hole
2 CN600 jack
3 CN601 jack
5 WIDE button
6 CN702 jack (for key SW)
When a tripod is used, please use
10 mm (13/32 in.) screw to attach it
to the camera. Also, please be
sure to attach the tripod securely.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
In general
Overview of Functions
• Power On/Off
Powers the camera on and off. When the power is off,
the camera is able to accept only the lowest level of
VISCA Commands; the display and other features are
turned off.
VISCA commands are the basis of camera control.
Timing Chart
• I/F clear
As VISCA Command processing can only be carried
out one time in a Vertical cycle, it takes the maximum
1V cycle time for an ACK/Completion to be returned.
If the Command ACK/Completion communication
time can be cut shorter than the1V cycle time, then
every 1V cycle can receive a Command.
Clears the Command buffer of the FCB camera.
Clearing the buffer can also be carried out from the
control application software when the power is on.
• Address set
VISCA is a protocol, which normally can support a
daisy chain of up to seven attached devices. In this
case, if addresses from 1 to 7 are assigned to each of
7 devices, you can control seven cameras with the
same personal computer. However, the FCB camera
does not support connection of cameras in a daisy
chain. Therefore, whenever a camera is connected for
the first time, be sure to use the address set to confirm
the address.
General Commands
• ID Write
Sets the camera ID.
Within
• Mute
Query Commands
Blanks the screen and sends out a synchronizing
signal.
Within
• Lens Initialize
Initializes the zoom and focus of the lens. Even when
power is already on, it initializes the zoom and the
focus.
• Comp Scan
16 Byte
A pixel blemish-masking feature, which can be made
to reevaluate overall CCD pixel blemishes and mask
severely flawed pixels automatically upon receiving
the COMP SCAN command. This feature helps to
mask the flaws found in CCD imagers, even after the
camera has been powered on for some time.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Zoom
Focus
The FCB camera employs a 36× optical zoom lens
combined with a digital zoom function; this camera
allows you to zoom up to 432×.
Focus has the following modes, all of which can be set
using VISCA Commands.
• Auto Focus Mode
The minimum focus distance is 320 mm at the optical
wide end and 1500 mm at the optical tele end, and is
independent of the digital zoom.
The Auto Focus (AF) function automatically adjusts
the focus position to maximise the high frequency
content of the picture in a center measurement area,
taking into consideration the high luminance and
strong contrast components.
• Optical 36×, f = 3.4 to 122.4 mm (F 1.6 to F 4.5)
The horizontal angle of view is approximately 57.8
degrees (wide end) to 1.7 degrees (tele end).
Digital Zoom enlarges the center of the subject by
expanding each image in both the vertical and
horizontal directions. When 432× zoom is used, the
number of effective picture elements in each direction
reduces to 1/12 and the overall resolution deteriorates.
- Normal AF Mode
This is the normal mode for AF operations.
You can activate the zoom in the following three ways
- Interval AF Mode
The mode used for AF movements carried out at
particular intervals. The time intervals for AF
movements and for the timing of the stops can be
set in one-second increments using the Set Time
Command. The initial value for both is set to five
seconds.
• By pressing the TELE or WIDE buttons on the
camera itself
• Using a VISCA Command
Using Standard Mode
Using Variable Mode
There are eight levels of zoom speed.
Direct Mode
Setting the zoom position enables quick
movement to the designated position.
Digital Zoom ON/OFF
- Zoom Trigger Mode
When the zoom is changed with the TELE or the
WIDE buttons, the pre-set value (initially set at 5
seconds) becomes that for AF Mode. Then, it
stops.
AF sensitivity can be set to either Normal or LOW.
- Normal
In these standard and variable Speed Modes, it is necessary
to send Stop Command to stop the zoom operation.
Reaches the highest focus speed quickly. Use this
when shooting a subject that moves frequently.
Usually, this is the most appropriate mode.
- LOW
Improves the stability of the focus. When the
lighting level is low, the AF function does not take
effect, even though the brightness varies,
contributing to a stable image.
• The Zoom Mode supports a Combined Mode and a
Separate Mode.
Combined Mode
This is the previously existing zoom method.
After the optical zoom has reached its maximum
level, the camera switches to Digital Zoom Mode.
Separate Mode
In this mode, Optical Zoom and Digital Zoom can
be operated separately. You can use digital zoom
magnification at any time from within any level of
optical magnification.
• Manual Focus Mode
Manual Focus has both a Standard Speed Mode and a
Variable Speed Mode. Standard Speed Mode focuses
at a fixed rate of speed. Variable Speed Mode has
eight speed levels that can be set using a VISCA
Command.
• Using an external key switch board connected to
the CN702 jack.
In these standard and variable Speed Modes, it is necessary to
send Stop Command to stop the zoom operation.
• One Push Trigger Mode
When a Trigger Command is sent, the lens moves to
adjust the focus for the subject. The focus lens then
holds that position until the next Trigger Command is
input.
• Infinity Mode
The lens is forcibly moved to a position suitable for
an unlimited distance.
• Near Limit Mode
Can be set in a range from 1000 (∞) to C000 (10 mm).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
• Bright
White Balance
Variable Iris and Gain (Close to F1.6, 17 steps at
White Balance has the following modes, all of which
can be set using VISCA Commands.
0 dB: F1.6, 15 steps from 0 to 28 dB)
AE – Shutter priority
• Auto White Balance
The shutter speed can be set freely by the user to a
total of 22 steps – 16 high speeds and 6 low speeds.
When the slow shutter is set, the speed can be 1/30s,
1/15s, 1/8s, 1/4s, 1/2s, 1/1s. The picture output is read at a
normal rate from the memory. The memory is updated
at a low rate from the CCD. AF capability is low.
In high speed mode, the shutter speed can be set up to
1/10,000s. The iris and gain are set automatically,
according to the brightness of the subject.
This mode computes the white balance value output
using color information from the entire screen. It
outputs the proper value using the color temperature
radiating from a black subject based on a range of
values from 3000 to 7500K.
This mode is the factory setting.
• ATW
Auto Tracing White balance (2000 to 10000 K)
• Indoor
3200 K Base Mode
Data
15
14
13
12
11
10
0F
0E
0D
0C
0B
0A
09
08
07
06
05
04
03
02
01
00
NTSC (s)
1/10000
1/6000
1/4000
1/3000
1/2000
1/1500
1/1000
1/725
1/500
1/350
1/250
1/180
1/125
1/100
1/90
PAL (s)
1/10000
1/6000
1/3500
1/2500
1/1750
1/1250
1/1000
1/600
1/425
1/300
1/215
1/150
1/120
1/100
1/75
• Outdoor
5800 K Base Mode
• One Push WB
The One Push White Balance mode is a fixed white
balance mode that may be automatically readjusted
only at the request of the user (One Push Trigger),
assuming that a white subject, in correct lighting
conditions, and occupying more than 1/2 of the
image, is submitted to the camera.
One Push White Balance data is lost when the power
is turned off. If the power is turned off, reset One
Push White Balance.
• Manual WB
Manual control of R and B gain, 256 steps each
1/60
1/50
1/30
1/25
Automatic Exposure Mode
1/15
1/12
The variety of AE functions, which allow video signal
to output the optimum image for subjects from low
light condition, to high light conditions, is available.
1/8
1/6
1/4
1/3
1/2
1/2
• Full Auto
1/1
1/1
Auto Iris and Gain, Fixed Shutter Speed (NTSC: 1/60
sec., PAL: 1/50 sec.)
AE – Iris priority
The iris can be set freely by the user to 18 steps
between F1.6 and Close.
The gain and shutter speed are set automatically,
according to the brightness of the subject.
• Shutter Priority1)
Variable Shutter Speed, Auto Iris and Gain
(1/1 to 1/10,000 sec., 16 high-speed shtter speeds plus
6 low-speed shutter speeds)
1)Flicker can be eliminated by setting shutter to
t1/100s for NTSC models used in countries with a 50 Hz
power supply frequency
t1/120s for PAL models used in countries with a 60 Hz
power supply frequency
Data
11
Setting value
F1.6
Data
08
Setting value
F8
10
F2
07
F9.6
0F
F2.4
06
F11
• Iris Priority
Variable Iris (F1.6 to Close, 18 steps), Auto Gain and
Shutter speed
0E
0D
0C
0B
0A
09
F2.8
05
F14
F3.4
04
F16
F4
03
F19
• Manual
Variable Shutter, Iris and Gain
F4.8
02
F22
F5.6
01
F28
F6.8
00
CLOSE
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
AE – Manual
The shutter speed (22 steps), iris (18 steps) and gain
(16 steps) can be set freely by the user.
When switching from the Shutter Priority mode to the
Bright mode, the shutter speed set in the Shutter
Priority mode is maintained.
AE – Bright
Spot Exposure Mode
The bright control function adjusts both gain and iris
using an internal algorithm, according to a brightness
level freely set by the user. Exposure is controlled by
gain when dark, and by iris when bright.
As both gain and iris are fixed, this mode is used when
exposing at a fixed camera sensitivity. When switching
from Full Auto or Shutter Priority Mode to Bright
Mode, the current status will be retained for a short
period of time.
In Full Auto AE, the level for the entire screen is
computed and the optimum Auto Iris and Gain levels
are determined. In Spot AE, a particular section of the
subject can be designated, and then that portion of the
image can be weighted and a value computed so that
Iris and Gain can be optimized to obtain an image.
For example, in an image with a lot of movement and
with varying levels of brightness, portions without
much change can be designated as such a “spot,” and
changes to the screen can be minimized in that area.
As shown in the diagram below, a range of 16 blocks
vertically and 16 blocks horizontally can be
designated.
Only when the AE mode is set to “Full Auto” or
“Shutter Priority,” can you switch it to “Bright.”
Gain
In the case where the center is designated (shown in
black), the level is computed along with a weighted
value for the surrounding block (shaded), including the
specified portions; and then the Gain and Iris are set.
The value of the designated portions and the
surrounding areas should be calculated as 100%, the
rest should be set to 20%. The range of the Spot AE
frame is fixed to 5 blocks vertically and 4 blocks
horizontally.
IRIS AGC
OPEN MAX
IRIS curve
Gain curve
CLOSE MIN
Dark
Bright
Controlled
by gain
Controlled by IRIS
Horizontal 16
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
Bright limit which controllable
for this unit
Vertical 16
Data
1F
1E
1D
1C
1B
1A
19
Iris
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F2
Gain
28 dB
26 dB
24 dB
22 dB
20 dB
18 dB
16 dB
14 dB
12 dB
10 dB
8 dB
Data
0F
0E
0D
0C
0B
0A
09
Iris
F2.4
F2.8
F3.4
F4
Gain
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
(8,8)
F4.8
F5.6
F6.8
F8
18
08
17
07
F9.6
F11
16
06
15
05
F14
14
6 dB
04
F16
13
4 dB
03
F19
12
2 dB
02
F22
11
0 dB
01
F28
10
0 dB
00
CLOSE
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Exposure Compensation
Aperture Control
Exposure compensation is a function which offsets the
internal reference brightness level used in the AE
mode, by steps of 1.5 dB.
Aperture control is a function which adjusts the
enhancement of the edges of objects in the picture.
There are 16 levels of adjustment, starting from “no
enhancement.” When shooting text, this control may
help by making them sharper.
Data
0E
0D
0C
0B
0A
09
Step
7
Setting value
10.5 dB
9 dB
6
Back Light Compensation
5
7.5 dB
6 dB
4
When the background of the subject is too bright, or
when the subject is too dark due to shooting in the AE
mode, back light compensation will make the subject
appear clearer.
3
4.5 dB
3 dB
2
08
1
1.5 dB
0 dB
07
0
06
–1
–2
–3
–4
–5
–6
–7
–1.5 dB
–3 dB
Wide Dynamic Range Mode
05
04
–4.5 dB
–6 dB
This function is effective when shooting images
against the sun, or when shooting a very bright
subject.
Using a CCD with a wide dynamic range and a newly
developed DSP allows the camera to combine signals
shot at a normal shutter speed and high intensity
images shot at the high shutter speed.
The shutter speed automatically changes (1/1000 sec.
to 1/8000 sec. Maximum ×128) depending on the level
requested by high intensity images to obtain the best
combined images.
03
02
–7.5 dB
–9 dB
01
00
–10.5 dB
Slow AE (Automatic Exposure)
The slow AE Response (automatic exposure) function
allows you to reduce the exposure response speed.
Usually the camera is set up so that the optimum
exposure can be obtained automatically within about 1
second. However, using the slow AE response function
allows you to lengthen the automatic exposure
response speed from the factory setup speed (01 (hex)
up to 32 times (20 (hex)).
Note
When the wide dynamic mode is ON, some part of the
image may appear solarised. This is normal for the wide
dynamic mode, and is not a camera malfunction.
For example, with the normal setting (about 1 second),
if the headlights of a car are caught by the camera, the
camera automatically adjusts the exposure so that it
can shoot a high-intensity subject (in this case, the
headlights). As a result, images around the headlights,
that is, the rest of the subject, except the headlights,
becomes relatively dark, and poorly distinguished.
However, using the slow AE function means the AE
response speed will be slower, and response time will
be longer. As a result, even if the camera catches a
high-intensity subject (e.g., the headlights) for a
moment, you can still easily distinguish the portions of
the image surrounding the headlights.
Slow shutter – Auto/Manual
When set to “Auto,” ensures that the slow shutter is set
automatically when the brightness drops. Effective
only when the AE mode is set to “Full Auto.”
Set to “Slow Shutter Manual” at shipment.
ICR (IR Cut-Removable) Mode
An infrared (IR) Cut-Filter can be disengaged from the
image path for increased sensitivity in low light
environments. The ICR will automatically engage
depending on the ambient light, allowing the camera to
be effective in day/night environments.
When the auto ICR mode is set to ON, the image
becomes black and white.
High Resolution Mode (Default)
A newly developed DSP function enables the filtering
of signals. This allows the camera to provide images
with a high resolution (530 TV lines).
When this function is set to OFF, the camera outputs
images which are equivalent to 480 TV lines, just as
with the FCB-EX1000/EX1000P camera.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Auto ICR Mode
Effect
Auto ICR Mode automatically switches the settings
needed for attaching or removing the IR Cut Filter.
With a set level of darkness, the IR Cut Filter is
automatically disabled (ICR ON), and the infrared
sensitivity is increased. With a set level of brightness,
the IR Cut Filter is automatically enabled (ICR OFF).
Also, on systems equipped with an IR light, the
internal data of the camera is used to make the proper
decisions to avoid malfunctions.
It consists of the following functions.
• Neg. Art: Negative/Positive Reversal
• Black White: Monochrome Image
Others
E-FLIP
This function turns the video output from the camera
upside down.
When Auto Slow Shutter is OFF (initial setting)
Mirror image
This function reverses the video output from the
camera horizontally.
Shutter 1/60 sec
AGC
MAX
IRIS
OPEN
ICR
Freeze
This function captures an image in the field memory of
the camera so that this image can be output
continuously.
GAIN
IRIS
ICR ON
SHUTTER
Because communication inside the camera is based on V
cycle, the captured image is always the one 3V to 4Vs after
the sending of a Command. Thus, you can not specify a time
period after sending EVEN, ODD or a Command.
Dark
Bright
ICR OFF t ON
When Auto Slow Shutter is ON
Memory (Position preset)
Using the position preset function, 6 sets of camera
shooting conditions can be stored and recalled.
This function allows you to achieve the desired status
instantly, even without adjusting the following items
each time.
• Zoom Position
• Digital Zoom On/Off
• Focus Auto/Manual
• Focus Position
• AE Mode
• Shutter control parameters
• Bright Control
• Iris control parameters
• Gain control parameters
• Exposure Compensation On/Off
• Exposure Level
• Backlight Compensation On/Off
• Slow Shutter Auto/Manual
• Slow AE Response speed
• White Balance Mode
• R/B Gain
Note
When in Auto_ICR_OFF state and WB data is added (default), a
malfunction may occur when the subjects largely consisting of blue
and green colors are taken.
Camera ID
• Aperture
• ICR Shoot On/Off
The ID can be set up to 65,536 (0000 to FFFF). As this
will be memorized in the nonvolatile memory inside,
data will be saved regardless of whether it has been
backed up.
Custom Preset
As with the positon preset function, the camera
shooting conditions can be stored and recalled. The
settings are recalled when the power is turned on. For
setting items, see the “Initial Settings, Custom Preset
and Backup” section on page 23.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
User Memory Area
00
A
01
B
02
C
03
D
04
E
05
F
06
G
07
H
0f
P
A user area of 16 bytes allows you to write data, such
as an ID for each customer, data for each system, and
so on, freely.
08
I
09
J
0a
K
12
S
0b
L
0c
M
14
U
0d
N
15
V
1d
!
0e
O
10
Q
11
R
13
T
16
W
1e
1
17
X
1f
2
Note
Rewriting of memory is not unlimited. Be careful to avoid using
the memory area for such as unnecessary tasks as rewriting the
contents of the memory for every operation.
18
Y
19
Z
1a
&
22
5
1b
1c
?
20
3
21
4
23
6
24
7
25
8
26
9
27
0
Privacy Zone Settings
For details, see page 13.
28
À
29
È
2a
Ì
2b
Ò
33
Ê
2c
Ù
2d
Á
35
Æ
3d
Ï
2e
É
2f
Í
Motion detection
For details, see page 17.
30
Ó
31
Ú
39
Ñ
41
$
32
Â
3a
Ç
34
Ô
36
Œ
3e
Ö
37
Ã
3f
Ü
47
¡
38
Õ
3b
ß
3c
Ä
Title Display
40
Å
42
F
43
¥
44
DM
4c
.
45
£
46
¿
• You can set a title composed of up to 11 lines. One
line can contain up to 20 characters.
• You can set display on/off, the horizontal position of
the first character, blinking state and color for each
line.
48
ø
49
“
4a
:
4b
‘
4d
,
4e
/
4f
-
• The camera gives priority to lines of a title when the
camera status is displayed on the relevant line. On the
lines where a title is not set, the camera status is
displayed.
Synchronization methods
Internal and external synchronization are available;
VISCA Commands allow you to switch between them.
• Internal synchronization
Line Number
H-position
00 to 0A
00 to 17
An internal vibrator inside the camera generates a
synchronizing signal as a basic oscillator.
NTSC=28.636363MHz
00: Does not blink
01: Blinks
Blink
Color
PAL=17.7344MHz
00
White
Yellow
Violet
Red
• External synchronization (V-Lock Synchronization 1))
When a TTL level V-Lock pulse is input, the camera
synchronizes to the input signal (V-lock
synchronization). The frequency of the input signal
synchronizes to within 1Hz of the external
synchronization.
Also, 360 degree phase adjustment is possible due to
the phase adjustment of the V-lock signal.
Because V-lock synchronization is a simple synchronization
method, color signals like a VBS “Genlock” signal cannot be
synchronized.
01
02
03
04
05
06
Cyan
Green
Blue
1)In V-lock synchronization, the camera makes a V-lock pulse
(VL-PULSE) which synchronizes to the commercial power
supply and uses it as the external synchronization input signal
of the camera, using the fact that the V cycle (59.97 Hz vertical
synchronization signal) and the frequency of the commercial
power supply (60 Hz). The synchronous signal of the camera
will automatically sychronizes to the VL-PULSE in the
camera.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Privacy Zone Masking Function
Features
• Mask can be set on up to 24 places according to Pan/
Tilt positions.
• Mask can be displayed on 8 places per screen
simultaneously.
• Privacy Zones are displayed according to priority in
alphabetical order.
• Individual on/off zone masking settings.
• Two colors from among 29 colors including mosaic
can be individually set for each of 24 privacy zones.
• Interlocking control with zooming.
• Interlocking control with Pan/Tilt.
• Non-interlocking control with Pan/Tilt.
Privacy Zone masking protects private objects and
areas such as house windows, entrances, and exits
which are within the camera’s range of vision but not
subject to surveillance.
Privacy zone masking can be masked on the monitor to
protect privacy.
Timing chart
8x 01 .. .. FF
(Mask Setting Command)
1V
Setting command is reflected
at this timing.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Privacy Zone Setting Command List
Command Packet
Command Set
Command
Comments
CAM_PrivacyZone SetMask
Setting Mask(Size)
8x 01 04 76 mm nn
0r 0r 0s 0s FF
See “mm: Mask setting list”, “nn: Setting”, and
“pp: x, qq:y, rr: w, ss: h” in “Parameters” on
page 15.
Display
Setting Mask Display On/Off
See “pp pp pp pp: Mask bit” in “Parameters”
on page 15.
8x 01 04 77 pp pp pp pp FF
pp pp pp pp: Mask setting (0: OFF, 1: ON)
SetMaskColor
8x 01 04 78 pp pp pp pp qq rr FF
Setting Color of Mask
See “pp pp pp pp: Mask bit” and “qq, rr: Color
code” in “Parameters” on page 15.
qq: Color setting when setting the Mask bit
to 0
rr: Color setting when setting the Mask bit
to 1
Setting Pan/Tilt Angle
See “Setting pan/tilt angle” in “Parameters” on
page 15.
SetPanTiltAngle
SetPTZMask
8x 01 04 79 0p 0p 0p 0q 0q 0q FF
ppp: Pan angle, qqq: Tilt angle
Setting the direct position of PTZ
8x 01 04 7B mm 0p 0p 0p
0q 0q 0q 0r 0r 0r 0r FF
See “mm: Mask setting list” and “Setting pan/
tilt angle” in “Parameters” on page 15.
ppp: Pan , qqq: Tilt , rrrr: Zoom
Non_InterlockMask 8x 01 04 6F mm
0p 0p 0q 0q 0r 0r 0s 0s FF
Setting non-interlocking the mask to pan/tilt
See “mm: Mask setting list” and “pp:x, qq:y,
rr:w, ss:h” in “Parameters” on page 15.
Grid On
8x 01 04 7C 02 FF
Setting Grid Display On/Off
Grid Off
8x 01 04 7C 03 FF
8x 01 04 7C 04 FF
CenterLineOn
Setting the center line On
Privacy Zone Inquiry Command List
Inquiry Command Command Packet Inquiry Packet
Comments
CAM_Privacy
DisplayInq
8x 09 04 77 FF
y0 50 pp pp pp pp FF
Inquiry about the status of Setting Mask
Display On/Off
See “pp pp pp pp: Mask bit” in “Parameters”
on page 15.
1:On, 0:Off
CAM_PrivacyPan
TiltInq
8x 09 04 79 FF
y0 50 0p 0p 0p 0q 0q 0q FF
Inquiry about the pan/tilt position currently set
See “Setting pan/tilt angle” in “Parameters” on
page 15.
ppp: Pan, qqq: Tilt
CAM_Privacy
PTZInq
8x 09 04 7B mm FF y0 50 0p 0p 0p 0q 0q 0q 0r 0r
0r 0r FF
Inquiry about pan/tilt/zoom position at the mm
Mask setting
See “mm: Mask setting list” and “Setting pan/
tilt angle” in “Parameters” on page 15.
ppp: Pan Position,
qqq: Tilt Position
rrrr: Zoom Position
y0 50 pp pp pp pp FF
CAM_Privacy
MonitorInq
8x 09 04 6F FF
Inquiry about the mask currently displayed
See “pp pp pp pp: Mask bit” in “Parameters”
on page 15.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Parameters
mm: Mask setting list
nn:Setting
Mask Name mm (Hex)
nn
Setting
Mask Name mm (Hex)
Mask_A
Mask_B
Mask_C
Mask_D
Mask_E
Mask_F
Mask_G
Mask_H
Mask_I
Mask_J
Mask_K
Mask_L
00h
01h
02h
03h
04h
05h
06h
07h
08h
09h
0Ah
0Bh
00
Resetting the zone size (the value of w,h)
for the existing mask.
Mask_M
Mask_N
Mask_O
Mask_P
Mask_Q
Mask_R
Mask_S
Mask_T
Mask_U
Mask_V
Mask_W
Mask_X
0Ch
0Dh
0Eh
0Fh
10h
11h
12h
13h
14h
15h
16h
17h
01
Setting newly the zone size (the value of
w,h).
pp: x, qq: y, rr: w, ss: h
160
3Ch
mask
h
w
120
0 (x,y)
Note
B0h
50h
The priority order of the mask display is in the sequence from A
(highest) to X (lowest).
When you set the parameters of masks non-sequentially, it is
recommended that you set the mask whose priority order is higher,
first.
C4h
Effective display area
pp pp pp pp: Mask bit
pp
pp
pp
pp
bit
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
- X W V U T S - R Q P O N M - - L K J I H G - F E D C B A
Mask
-
-
-
The “-” must be “0”.
Setting pan/tilt angle
qq, rr: Color code
Mask (Color)
Code (qq, rr)
Semi-transparency (qq, rr)
Angle/Parameter of Angle (ppp, qqq)
Black
00h
01h
02h
03h
04h
05h
06h
07h
08h
09h
0Ah
0Bh
0Ch
0Dh
7Fh
10h
11h
12h
13h
14h
15h
16h
17h
18h
19h
1Ah
1Bh
1Ch
1Dh
–
Gray1
Gray2
Gray3
Gray4
Gray5
Gray6
White
Red
-180
-90
0
90
180
800h
C00h
400h
800h
Set the angle resolution to 360 (degree)/4096 (1000h).
Green
Blue
Cyan
Yellow
Magenta
Mosaic
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Comments: Two different color masks can be
Details of Setting Commands
chosen.
Set Mask
The colors can be chosen from among 14 colors
including the possibility for semi-transparency of
each color. Therefore two colors from among the
total of 29 colors including mosaic can be
individually set for each of 24 privacy zones.
If the bit of parameter (pp pp pp pp) is set to “0”,
mask color will be “qq” color (Color code). If the
bit of parameter (pp pp pp pp) is set to “1”, the
mask color will be “rr” color (Color code).
Command: 8x 01 04 76 mm nn 0r 0r 0s 0s FF
Parameters:
mm
Setting Mask
See “mm: Mask setting list” in “Parameters” on page 15.
nn
Selects new setting or resetting for the zone. See “nn:
Setting” in “Parameters” on page 15.
rr
Sets the half value “w” of the Mask Width.
ss
Sets the half value “h” of the Mask Height.
See “pp: x, qq: y, rr: w, ss: h” in “Parameters” on page 15.
Example: 8x 01 04 78 00 00 00 03 10 07 FF
The mask color of Mask_A and Mask_B is White
(color code 07h), and the mask color of the other
Mask (C to X) is semi-transparent Black (color
code 10h).
Comments: To set the mask, first display the object
at the center of the screen. When “nn” is set to 1,
the current Pan/Tilt/Zoom position is recorded in
internal memory.
Set Pan Tilt Angle
Command: 8x 01 04 79 0p 0p 0p 0q 0q 0q FF
Parameter:
When “nn” is set to 0, the Pan/Tilt/Zoom position
in memory is not changed.
Notes
ppp
qqq
Pan Angle
• The tilt angle at which you can set the mask is between –70 to
+70 degrees.
• It is recommended that you set the size to at least twice the size
of the object (height and width).
Tilt Angle
See “Setting pan/tilt angle” in “Parameters” on page
15.
Comments: Pan/Tilt angle settings are hexadecimal
data.
Set Display
Command: 8x 01 04 77 pp pp pp pp FF
Parameter:
The resolution of Pan/Tilt angle is 0.088 degrees.
Note
pp pp pp pp Each 24 Privacy Zones corresponds to 1 bit.
See “pp pp pp pp: Mask bit” in “Parameters” on
page 15.
When you set the pan/tilt angle, locate the pan/tilt position at the
center point of the FCB camera’s position.
Set PTZ Mask
Command: 8x 01 04 7B mm 0p 0p 0p 0q 0q 0q 0r 0r
0r 0r FF
Parameter:
Comments: Each of 24 Privacy zones can be
switched on and off individually by a single
VISCA command. If you want to display a
Privacy zone, you must set its bit to 1. If you do
not want to display a Privacy zone, you must set
its bit to 0.
mm
ppp
qqq
rrrr
Setting Mask
See “mm: Mask setting list” in “Parameters” on page 15.
Pan Angle (000 to FFF) See “Setting pan/tilt angle” on
page 15.
Set Mask Color
Command: 8x 01 04 78 pp pp pp pp qq rr FF
Parameter:
Tilt Angle (000 to FFF) See “Setting pan/tilt angle” on
page 15.
Zoom Position (000 to 4000) See “Zoom Ratio and Zoom
Position (for reference)” on page 47.
pp pp pp pp Each 24 Privacy Zones correspond with the BIT.
See “pp pp pp pp: Mask bit” in “Parameters” on
page 15.
qq
Set the color code include the semi-transparency
code.
Comments: Mask can be set at the desired position
by setting the pan tilt angle and zoom position
using this command. The set value can be input by
hexadecimal number.
rr
Set the color code include the semi-transparency
code. See “qq, rr: Color code” in “Parameters” on
page 15.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Non Interlock Mask
Command: 8x 01 04 6F mm 0p 0p 0q 0q 0r 0r 0s 0s
Motion Detection Function
FF
This function instructs the camera to detect movement
within the monitoring area and then send an alarm
signal automatically.
Parameters:
mm
Setting Mask
See “mm: Mask setting list” in “Parameters” on page 15.
The Detect signal goes out through the serial command
(VISCA) communication line.
pp
qq
rr
Sets the center position “x” of the Mask on screen.
Sets the center position “y” of the Mask on screen.
Sets the half value “w” of the Mask Width.
Features
ss
Sets the half value “h” of the Mask Height.
See “pp: x, qq: y, rr: w, ss: h” in “Parameters” on page 15.
• You can set a frame for the detection range of 12
(horizontally) × 8 (vertically) blocks.
• You can set up to four frames.
• When the motion is detected in the set frame, the
Alarm Replay VISCA command is sent.
• The threshold level for detection can be set (common
to four frames).
• The interval of alarm detection can be set up to 256
seconds in units of one second.
Commands: Mask does not interlock with pan/tilt.
The limitations of parameters are as follows.
(hexadecimal representation)
x: 50h
w: 50h
y: 3ch
h: 3ch
• You can set on/off for each frame.
Note
• When the Block Mode is set to ON, the Alarm Reply
command is not sent. Use this mode for checking
when the camera is installed or for confirming the
camera operation.
When the Set Mask command and the Non Interlock Mask
command are set to the same mask, the command set later
becomes effective.
• The frame number is also sent with Alarm Replay to
report in which frame the motion has been detected.
Grid
Use the grid displayed on the screen to set mask
positions (see the figure below).
By executing the Center Line On command, only the x
and y axes of the center are displayed. Grids lines
disappear.
Frames
Setting frames
You can set the frame by assigning the starting point
and terminating point vertically and horizontally. You
can set up to four frames.
14hex (20(10))
14hex (20(10))
When motion is detected within the rage
where frames overlap
The alarms are sent for both frames.
Frame 1
Frame 2
Frame 3
Frame 4
Within this overlapped
range, alarms are sent for
both frame 3 and frame 4.
At this position, the
alarm for frame 3 is
sent.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
• When multiple motions are detected or motion is
Sending Alarms
detected in another frame within the set interval
following the original time the alarm was issued,
another alarm command is not issued.
• When motion is detected after the interval time
elapsed, the alarm is issued again.
• When motion is detected, the Alarm Replay
command is issued via the serial command (VISCA)
communication line.
Alarm issue
Alarm issue
Alarm issue
Alarm issue
Interval
Interval
Interval
Alarm interval
Motion is Motion is Motion is
detected detected detected
in frame 1. in frame 1. in frame 1. in frame 1.
Motion is
detected
Motion is Motion is Motion is
detected detected detected
in frame 1. in frame 2. in frame 3. in frame 3.
Motion is
detected
• Frame Set
You can set up to four frames by assigning the
Setting Commands
• MD On/Off
starting and terminating points.
The Display mode is selected by the Function Set
command and frames are set by the Frame Set
command. By sending an MD On command, the
frame is displayed when motion is detected in the set
frame. The Alarm Reply command is set via the
serial command (VISCA) communication line.
Note
Set a terminating point higher vertically and
horizontally than the starting point. If you set the
wrong value, the command yields an error.
8x 01 04 1D 0m 0p 0q 0r 0s FF
m: Select Detection Frame (0: Frame0, 1: Frame1, 2:
8x 01 04 1B 02 FF --- On
8x 01 04 1B 03 FF --- Off
Frame2, 3: Frame3)
-- (0, 1, 2, 3)
p: Frame set Start Horizontal Position -- (00 to 0B)
q: Frame set Start Vertical Position
r: Frame set End Horizontal Position
s: Frame set End Vertical Position
-- (00 to 07)
-- (01 to 0C)
-- (01 to 08)
• Function Set
The Display mode function has two modes. One is
the Frame Mode, in which the detected frame is
displayed on the screen, and the other is the Block
Mode in which the block where the motion is
detected is displayed from among the set of 12
(horizontally) × 8 (vertically) blocks. The Frame
Mode is normally used. For examination and
verification when the camera is installed, display
blocks using the Block Mode. In the Block Mode, the
Alarm Reply command is not sent.
• Alarm Reply
When motion is detected in the set frame, the camera
issues this command. This command includes the
information on the number of the detected frame.
y0 07 04 1B 0p FF
p: Frame Number (bit0: Frame0, bit1: Frame1, bit2:
Frame2, bit3: Frame3)
8x 01 04 1C 0m 0n 0p 0q 0r 0s FF
m: Display Mode
Block)
on/off (bit0: Frame, bit1:
n: Detection Frame set on/off (bit0:Frame0,
bit1:Frame1, bit2:Frame2, bit3:Frame3)
-- (0 to F)
pq: Threshold
rs: Interval time set
-- (00 to FF)
-- (00 to FF)
(When pq and rs are 0, the command is received, but
the setting is disabled.)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Eclipse
Vibration
Specifications
When designing the housing, refer to the dimensional
allowance as shown in the figure below.
Test Method (Random vibration)
• Fix the camera at the four fixation points of the base
using M2 screws.
• Perform the random vibration test under the
following conditions in the X, Y and Z directions for
20 minutes in each direction.
• The camera vibration specification is to have no
malfunction after this test.
5 to 50 Hz
50 to 100 Hz –36 dB/oct
4.14 m2/s3
{0.043 G2/Hz}
Power spectrum density
14.3 m/s2
{1.46 G}
Effective overall value
Test time
20 minutes
Spectral Sensitivity
Characteristics
Use the graph as a reference value. (We can not
guaranttee these values.)
This data is measured when the IR cut filter is
removed and the characteristics of the lens and optical
source characteristics are ignored.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Key Switch Circuitry
The circuitry shown below is an example. Note that all
switches in the figure do not function in all models.
For more information, refer to the command list, check
functions on the camera, or contact your Sony dealer.
a)
a) The CN101 is connected to the CN702 on the FCB camera main unit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Key Function Specifications
Classification Name
Function
Button operation
Mode display
ZOOM
WIDE
Move ZOOM to WIDE side quickly.
Pressing repeatedly allowed. ZOOM bar displayed
for 3 s.
WIDE SLOW Move ZOOM to WIDE side slowly.
TELE SLOW Move ZOOM to TELE side slowly.
TELE FAST Move ZOOM to TELE side quickly.
Pressing repeatedly allowed. ZOOM bar displayed
for 3 s.
Pressing repeatedly allowed. ZOOM bar displayed
for 3 s.
Pressing repeatedly allowed. ZOOM bar displayed
for 3 s.
D-ZOOM
DZOOM
Turn on/off the mode for shifting from optical
MAX to electronic ZOOM in combined mode.
Switch on/off.
ZOOM bar displayed
for 3 s.
DZOOM
WIDE
Move the electronic ZOOM to WIDE side in
separate mode.
Pressing repeatedly allowed. ZOOM bar displayed
for 3 s.
DZOOM
TELE
Move the electronic ZOOM to TELE side in
separate mode.
Pressing repeatedly allowed. ZOOM bar displayed
for 3 s.
DZOOM
MAX
Switch the electronic ZOOM between 1× and
MAX in separate mode.
Switch between 1× and MAX ZOOM bar displayed
magnification.
for 3 s.
FOCUS
AF
Switch between Auto Focus and Manual Focus. Switch between Auto and
Manual.
Manual F indication
NEAR
FAR
Move focus to NEAR side in Manual Focus
mode.
Pressing repeatedly allowed. Near indication
Move focus to FAR side in Manual Focus mode. Pressing repeatedly allowed. Far indication
ONE PUSH
AF
Perform AF operation once in Manual Focus
mode.
Request One Push AF.
Manual F indication
flashes while request
is made.
INFINITY
Move focus forcibly to Infinity resulting in
Manual Focus mode, regardless of the current
focus mode.
Request Infinity.
Far indication
AE
AE AUTO
BRIGHT
Switch to AE FULL Auto mode.
Request AE Full Auto.
No display
Switch to variable brightness mode (BRIGHT), Request Bright mode.
Bright bar display
depending on the conditions for mode shifting.
Shutter priority AE mode
Pressing Up/Down key
repeatedly allowed.
SHUTTER
IRIS
Request shutter priority AE
mode.
Shutter code display
Iris code display
Backlight indication
No display
Iris priority AE mode
Request iris priority AE
mode.
BACK
LIGHT
Switch backlight on/off.
Switch on/off.
WB
AUTO WB
Switch to AUTO WB mode.
Request Auto WB mode.
ONE PUSH
WB
Switch to One Push WB mode when pressed
once and capture data when pressed 2nd time.
Request One Push WB mode One Push indication
and trigger.
flashes at 0.8 Hz
before capturing data,
at 3.2 Hz during
capturing, and stays lit
after capturing.
ATW
Switch to ATW mode.
Request ATW mode.
Request Indoor mode.
Request Outdoor mode.
Switch between R control
ATW display
INDOOR
OUTDOOR
Enable WB at 3200K in INDOOR mode.
Enable WB at 5800K in OUTDOOR mode.
Switch to Manual WB mode.
Indoor indication
Outdoor indication
“WB-MAN”
MANUAL
WB
Enable R control when pressed once and enable and B control in manual WB (character display)
B control when pressed 2nd time. Switchable
with UP/DOWN key.
mode. Pressing Up/Down
key repeatedly allowed.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Classification Name
Function
Button operation
Switch on/off.
Mode display
FEATURE
FREEZE
Capture still image.
Horizontal reversal
FREEZE indication
LR-
REVERSE
Switch on/off.
Horizontal reversal
indication
BLACK &
WHITE
Black-and-white output
Switch on/off.
B&W display
NEGA ART
MUTE
Negative art output
Mute video output
Switch on/off.
Switch on/off.
Neg Art display
“MUTE” (character
display)
DISPLAY
DISPLAY
TITLE
Display
Switch on/off.
Title setting
Request setting. t Setting
is started with Exec.
Title setting screen
display
Pressing Up/Down key
repeatedly allowed.
EXEC
UP
Confirm title setting.
Select with Up/Down and
confirm with Exec.
Setting screen selection
highlighted in yellow.
UP/DOWN
PRESET
Data UP key (priority for AE mode, Bright,
manual WB, title, and clock)
Request UP.
Selection highlighted.
DOWN
Data DOWN key (priority for AE mode, Bright, Request DOWN.
manual WB, title, and clock)
Selection highlighted.
POS1
POS2
POS3
POS4
POS5
POS6
POS7
Recall preset position 1.
Recall preset position 2.
Recall preset position 3.
Recall preset position 4.
Recall preset position 5.
Recall preset position 6.
Recall custom preset.
Request recall.
Request recall.
Request recall.
Request recall.
Request recall.
Request recall.
Request recall.
Request setting. Enabled
RECALL POS0
RECALL POS1
RECALL POS2
RECALL POS3
RECALL POS4
RECALL POS5
RECALL
POS PRESET Write data.
PRESET display
Enabled when pressed together with POS button. when pressed together with
POS key.
POS RESET Delete data.
Request deletion. Enabled
Enabled when pressed together with POS button. when pressed together with
POS key.
RESET display
Others
APERTURE Increase aperture (Aperture UP)
UP
Request UP.
Aperture bar displayed
for 3 s.
AUTO SLOW Switch Auto Slow Shutter on/off.
SHUTTER
Switch on/off.
Request DOWN.
“ASS” (character
display)
APERTURE Decrease aperture (Aperture DOWN)
DOWN
Aperture bar displayed
for 3 s.
AF
Switch AF sensitivity between Normal and Low. Switch between Normal and “SENS L” (character
SENSITIVITY
Low.
display)
BRIGHT UP Raise brightness setting (Bright UP)
Request UP./Pressing
Bright bar display
(When not in Bright mode, switching to Bright mode repeatedly allowed.
is made automatically depending on the conditions.)
BRIGHT
DOWN
Lower brightness setting (Bright DOWN)
(When not in Bright mode, switching to Bright mode repeatedly allowed.
is made automatically depending on the conditions.)
Request DOWN./Pressing
Bright bar display
ICR ON/OFF Switch ICR mode on/off
Switch on/off
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Initial Settings, Custom Preset and Backup
Initial settings for the various functions of the FCB
camera are indicated in the “Initial settings” column.
The “Custom preset” column indicates whether the
custom preset function can be used to store the
settings. The function enables the stored settings to be
recalled automatically when the camera is turned on.
The “Back up at standby” column indicates whether
the data is preserved even when the camera is powered
OFF.
Custom
preset
Back up
Mode/Position setting
Zoom Position
Initial settings
at standby
Wide end
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
×
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
×
D-Zoom On/Off
D-Zoom Separate/Combine
D-Zoom Position
Focus Position
On
Combine
00h
—
Focus Auto/Manual
Near Limit Setting
AF Sensitivity
Auto
8000h (32cm)
Normal
AF Mode
Normal
AF Run Time
5 sec
AF Interval
5 sec
WB Mode
Auto
WB Data (Rgain, Bgain)
One Push WB Data
AE Mode
—
—
Full Auto
AE Response
01
WD On/Off
Off
Slow Shutter Mode
Shutter Position
Manual
1/60sec (NTSC), 1/50sec (PAL)
Iris Position
—
—
Gain Position
Bright Position
—
Exposure Compensation On/Off
Exposure Compensation Amount
BackLight On/Off
Spot AE On/Off
Spot AE Position Setting
Aperture Level
Off
0
Off
Off
X=8, Y=8
6
High Resolution Mode On/Off
LR Reverse On/Off
Freeze On/Off
On
Off
Off
Off
Off
Off
0Ah
Off
Picture Effect
a
a
a
a
a
a
a
a
a
a
ICR On/Off
Auto ICR On/Off
Auto ICR Threshold Level
Stabilizer On/Off
A circle “a” in this column signifies that the data is preserved.
A cross “×” signifies that the data IS NOT preserved.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Custom
preset
Back up
Mode/Position setting
Camera Memory
Initial settings
at standby
Same as the initial value setting
a
a
×
a
a
×
Display On/Off
Off
Mute On/Off
Off
Title Display On/Off
Title Setting
Off
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
×
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
—
Mask Setting
—
Mask Display On/Off
Mask Color Setting
Grid/Center Line Display On/Off
Alarm On/Off
Off
—
Off
Off
Alarm Mode
—
Alarm Detect Level
E-Flip On/Off
—
Off
Privacy Zone On/Off
Privacy Zone Setting
Key Lock On/Off
Camera ID
Off
—
Off
0000h
External Lock Mode
V-Phase
Internal
Vsync edge position
Alarm DayLight Threshold Level
MD On/Off
—
Off
Off
10h
1 sec
—
MD Display Setting
MD Threshold Level
MD Interval
MD Window Setting
ZoomPos Continuous Output On/Off
ZoomPos Continuous Output Interval
Off
3Ch
×
A circle “a” in this column signifies that the data is preserved.
A cross “×” signifies that the data IS NOT preserved.
Note
The number of times written to EEPROM (when Custom Preset is
executed) is limited.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Overview of VISCA
VISCA1)/RS-232C
Commands
This Manual outlines an RS-232 control protocol and
command list for certain Sony cameras from which
control software can be developed.
THIS CONTROL PROTOCOL AND COMMAND
LIST IS PROVIDED BY SONY ON AN “AS-IS
BASIS” WITHOUT WARRANTY OF ANY KIND.
SONY DOES NOT WARRANT ANY PARTICULAR
RESULT FROM THE USE OF THIS CONTROL
PROTOCOL AND COMMAND LIST AND
DISCLAIMS AND EXCLUDES ALL
WARRANTIES. EXPRESS OR IMPLIED, WITH
RESPECT TO THAT CONTROL PROTOCOL AND
COMMAND LIST, INCLUDING, BUT NOT
LIMITED TO, ANY OR ALL IMPLIED
In VISCA, the device outputting commands, for
example, a computer, is called the controller. The
device receiving the commands, an FCB camera is
called the peripheral device. In VISCA, up to seven
peripheral devices like the FCB camera can be
connected to one controller using communication
conforming to the RS-232C standard. The parameters
of RS-232C are as follows.
• Communication speed: 9.6 kbps/19.2 kbps/
38.4 kbps
• Data bits : 8
• Start bit : 1
• Stop bit : 1/2
• Non parity
Flow control using XON/XOFF and RTS/CTS, etc., is
not supported.
WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. IN
FACT, SONY SPECIFICALLY ACKNOWLEDGES
THAT SOFTWARE DEVELOPED BASED ON THIS
CONTROL PROTOCOL AND COMMAND LIST
MAY CAUSE MALFUNCTION OR DAMAGE TO
HARDWARE AND SOFTWARE USED WITH IT
(INCLUDING SONY HARDWARE AND
SOFTWARE) AND SPECIFICALLY DISCLAIMS
ANY LIABILITY FOR ANY SUCH
MALFUNCTION OR DAMAGE. THIS CONTROL
PROTOCOL AND COMMAND LIST SHOULD BE
USED WITH CAUTION.
................................................................................................................................................................................................................................
1)VISCA is a protocol which controls consumer camcorders developed by Sony. “VISCA” is a trademark of Sony Corporation.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
assigned address 2 is 82H. In the command list, as the
header is 8X, input the address of the camera at X. The
header of the reply packet from the camera assigned
address 1 is 90H. The packet from the camera assigned
address 2 is A0H.
VISCA Communication
Specifications
VISCA packet structure
Some of the commands for setting cameras can be sent
to all devices at one time (broadcast). In the case of
broadcast, the header should be hexadecimal 88H.
When the terminator is FFH, it signifies the end of the
packet.
The basic unit of VISCA communication is called a
packet. The first byte of the packet is called the header
and comprises the sender’s and receiver’s addresses.
For example, the header of the packet sent to the FCB
camera assigned address 1 from the controller (address
0) is hexadecimal 81H. The packet sent to the camera
Packet (3 to 16 bytes)
Header
Message (1 to 14 bytes)
Terminator
Byte 1
Byte 2
Byte 3
FF
Sender’s
address
Receiver’s address
1
0
1
1
1
1
1
1
1
1
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
(MSB)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
(MSB)
(LSB)
(LSB)
Command and inquiry
● Command
Sends operational commands to the FCB camera.
● Inquiry
Used for inquiring about the current state of the
FCB camera.
Command Packet
8X QQ RR ... FF
Note
Inquiry
QQ1) = Command/Inquiry,
RR2) = category code
1)
QQ = 01 (Command), 09 (Inquiry)
2)
RR = 00 (Interface), 04 (camera 1), 06 (Pan/Tilter), 07 (camera 2)
X = 1 to 7: FCB camera address
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Responses for commands and inquiries
Command execution cancel
● ACK message
To cancel a command which has already been sent,
send the Cancel command as the next command. To
cancel one of any two commands which have been
sent, use the cancel message.
Returned by the FCB camera when it receives a
command. No ACK message is returned for
inquiries.
Cancel Packet
8X 2Y FF
Note
Y = socket number
● Completion message
Cancel
Returned by the FCB camera when execution of
commands or inquiries is completed. In the case of
inquiry commands, it will contain reply data for the
inquiry after the 3rd byte of the packet. If the ACK
message is omitted, the socket number will contain
0.
X = 1 to 7: FCB camera address, Y = socket number
An error message will be returned for this command,
but this is not a fault. It indicates that the command has
been canceled.
Reply Packet
Note
Ack
X0 4Y FF
Y = socket number
Y = socket number
Y = socket number
Completion (commands) X0 5Y FF
Completion (Inquiries) X0 5Y ... FF
X = 9 to F: FCB camera address + 8
● Error message
When a command or inquiry command could not be
executed or failed, an error message is returned
instead of the completion message.
Error Packet
X0 6Y 01 FF
X0 6Y 02 FF
X0 6Y 03 FF
X0 6Y 04 FF
X0 6Y 05 FF
X0 6Y 41 FF
Description
Message length error (>14 bytes)
Syntax Error
Command buffer full
Command cancelled
No socket (to be cancelled)
Command not executable
X = 9 to F: FCB camera address + 8, Y = socket number
Socket number
When command messages are sent to the FCB camera,
it is normal to send the next command message after
waiting for the completion message or error message
to return. However to deal with advanced uses, the
FCB camera has two buffers (memories) for
commands, so that up to two commands including the
commands currently being executed can be received.
When the FCB camera receives commands, it notifies
the sender which command buffer was used using the
socket number of the ACK message. As the
completion message or error message also has a socket
number, it indicates which command has ended. Even
when two command buffers are being used at any one
time, an FCB camera management command and some
inquiry messages can be executed.
The ACK message is not returned for these commands
and inquiries, and only the completion message of
socket number 0 is returned.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
VISCA Device Setting
Command
Before starting control of the FCB camera, be sure to
send the Address command and the IF_Clear
command using the broadcast function.
For VISCA network administration
● Address
Sets an address of a peripheral device. Use when
initializing the network, and receiving the following
network change message.
● Network Change
Sent from the peripheral device to the controller
when a device is removed from or added to the
network. The address must be re-set when this
message is received.
Packet
Note
Address
88 30 01 FF
Always broadcasted.
Network Change
X0 38 FF
X = 9 to F: FCB camera address + 8
VISCA interface command
● IF_Clear
Clears the command buffers in the FCB camera and
cancels the command currently being executed.
Command Packet Reply Packet Note
IF_Clear
8X 01 00 01FF
X0 50 FF
IF_Clear (broadcast) 88 01 00 01 FF
88 01 00 01 FF
X = 1 to 7: FCB camera address (For inquiry packet)
X = 9 to F: FCB camera address +8 (For reply packet)
VISCA interface and inquiry
● CAM_VersionInq
Returns information on the VISCA interface.
Inquiry
Inquiry Packet Reply Packet
Description
CAM_VersionInq 8X 09 00 02 FF Y0 50 GG GG HH HH JJ JJ KK FF GGGG = Vender ID
(0020: Sony)
HHHH = Model ID
0444: FCB-EX1010
0445: FCB-EX1010P
JJJJ = ROM revision
KK = Maximum socket #(02)
X = 1 to 7: FCB camera address (For inquiry packet)
X = 9 to F: FCB camera address +8 (For reply packet)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
VISCA Command/ACK Protocol
Command
Command Message
Reply Message
Comments
General Command
81 01 04 38 02 FF
(Example)
90 41 FF (ACK)+90 51 FF
(Completion)
Returns ACK when a command has been accepted, and
Completion when a command has been executed.
90 42 FF
90 52 FF
81 01 04 38 FF
(Example)
90 60 02 FF (Syntax Error)
Accepted a command which is not supported or a command
lacking parameters.
81 01 04 38 02 FF
(Example)
90 60 03 FF
There are two commands currently being executed, and the
command could not be accepted.
(Command Buffer Full)
81 01 04 08 02 FF
(Example)
90 61 41 FF
Could not execute the command in the current mode.
(Command Not Executable)
90 62 41FF
Inquiry Command
81 09 04 38 FF
(Example)
90 50 02 FF (Completion)
ACK is not returned for the inquiry command.
Accepted an incompatible command.
81 09 05 38 FF
(Example)
90 60 02 FF (Syntax Error)
Address Set
88 30 01 FF
88 01 00 01 FF
8x 01 00 01 FF
8x 2y FF
88 30 02 FF
Returned the device address to +1.
Returned the same command.
IF_Clear(Broadcast)
IF_Clear (For x)
Command Cancel
88 01 00 01 FF
z0 50 FF (Completion)
ACK is not returned for this command.
z0 6y 04 FF
Returned when the command of the socket specified is canceled.
Completion for the command canceled is not returned.
(Command Canceled)
z0 6y 05 FF (No Socket)
Returned when the command of the specified socket has already
been completed or when the socket number specified is wrong.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
VISCA Camera-Issued Messages
ACK/Completion Messages
Comments
Command Messages
Returned when the command is accepted.
ACK
z0 4y FF
(y:Socket No.)
Returned when the command has been executed.
Completion
z0 5y FF
(y:Socket No.)
z = Device address + 8
Error Messages
Comments
Command Messages
Returned when the command format is different or when a command with illegal
command parameters is accepted.
Syntax Error
z0 60 02 FF
Indicates that two sockets are already being used (executing two commands) and the
command could not be accepted when received.
Command Buffer Full
Command Canceled
z0 60 03 FF
Returned when a command which is being executed in a socket specified by the
cancel command is canceled. The completion message for the command is not
returned.
z0 6y 04 FF
(y:Socket No.)
Returned when no command is executed in a socket specified by the cancel
command, or when an invalid socket number is specified.
No Socket
z0 6y 05 FF
(y:Socket No.)
Returned when a command cannot be executed due to current conditions. For
example, when commands controlling the focus manually are received during auto
focus.
Command Not Executable
z0 6y 41 FF
(y:Socket No.)
Network Change Message
Command Message
z0 38 FF
Comments
Network Change
Issued when power is being routed.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
FCB Camera Commands
Command List (1/5)
Command Set
Command
Broadcast
Broadcast
Command Packet
88 30 01 FF
Comments
AddressSet
Address setting
I/F Clesr
IF_Clear
88 01 00 01 FF
CommandCancel
CAM_Power
8x 2p FF
p: Socket No.(=1or2)
Power ON/OFF
On
8x 01 04 00 02 FF
8x 01 04 00 03 FF
8x 01 04 07 00 FF
8x 01 04 07 02 FF
8x 01 04 07 03 FF
8x 01 04 07 2p FF
8x 01 04 07 3p FF
8x 01 04 47 0p 0q 0r 0s FF
8x 01 04 06 02 FF
8x 01 04 06 03 FF
8x 01 04 36 00 FF
8x 01 04 36 01 FF
8x 01 04 06 00 FF
8x 01 04 06 2p FF
8x 01 04 06 3p FF
8x 01 04 06 10 FF
8x 01 04 46 00 00 0p 0q FF
8x 01 04 08 00 FF
8x 01 04 08 02 FF
8x 01 04 08 03 FF
8x 01 04 08 2p FF
8x 01 04 08 3p FF
8x 01 04 48 0p 0q 0r 0s FF
8x 01 04 38 02 FF
8x 01 04 38 03 FF
8x 01 04 38 10 FF
8x 01 04 18 01 FF
8x 01 04 18 02 FF
8x 01 04 28 0p 0q 0r 0s FF
8x 01 04 58 02 FF
8x 01 04 58 03 FF
8x 01 04 57 00 FF
8x 01 04 57 01 FF
8x 01 04 57 02 FF
8x 01 04 27 0p 0q 0r 0s FF
8x 01 04 47 0p 0q 0r 0s
0t 0u 0v 0w FF
Off
CAM_Zoom
Stop
Tele(Standard)
Wide(Standard)
Tele(Variable)
Wide(Variable)
Direct
p=0 (Low) to 7 (High)
pqrs: Zoom Position
CAM_DZoom
On
Digital zoom ON/OFF
Off
Combine Mode
Separate Mode
Stop
Optical/Digital Zoom Combined
Optical/Digital Zoom Separate
Tele(Variable)
Wide(Variable)
x1/Max
p=0 (Low) to 7 (High)
x1/MAX Magnification Switchover
pq: D-Zoom Position
Direct
CAM_Focus
Stop
Far(Standard)
Near(Standard)
Far(Variable)
Near(Variable)
Direct
p=0 (Low) to 7 (High)
pqrs: Focus Position
AF ON/OFF
Auto Focus
Manual Focus
Auto/Manual
One Push Trigger
Infinity
One Push AF Trigger
Forced infinity
Near Limit
Normal
pqrs: Focus Near Limit Position
AF Sensitivity High/Low
AF Sensitivity
Low
CAM_AFMode
Normal AF
Interval AF
Zoom Trigger AF
Active/Interval Time
Direct
AF Movement Mode
pq: Movement Time, rs: Interval
pqrs: Zoom Position
CAM_ZoomFocus
CAM_Initialize
tuvw: Focus Position
Lens
8x 01 04 19 01 FF
8x 01 04 19 02 FF
Lens Initialization Start
Comp Scan
Correction of CCD pixel blemishes
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Command List (2/5)
Command Set
Command
Auto
Command Packet
8x 01 04 35 00 FF
8x 01 04 35 01 FF
8x 01 04 35 02 FF
8x 01 04 35 03 FF
8x 01 04 35 04 FF
8x 01 04 35 05 FF
8x 01 04 10 05 FF
8x 01 04 03 00 FF
8x 01 04 03 02 FF
8x 01 04 03 03 FF
8x 01 04 43 00 00 0p 0q FF
8x 01 04 04 00 FF
8x 01 04 04 02 FF
8x 01 04 04 03 FF
8x 01 04 44 00 00 0p 0q FF
8x 01 04 39 00 FF
8x 01 04 39 03 FF
8x 01 04 39 0A FF
8x 01 04 39 0B FF
8x 01 04 39 0D FF
8x 01 04 5A 02 FF
8x 01 04 5A 03 FF
8x 01 04 0A 00 FF
8x 01 04 0A 02 FF
8x 01 04 0A 03 FF
8x 01 04 4A 00 00 0p 0q FF
8x 01 04 0B 00 FF
8x 01 04 0B 02 FF
8x 01 04 0B 03 FF
8x 01 04 4B 00 00 0p 0q FF
8x 01 04 0C 00 FF
8x 01 04 0C 02 FF
8x 01 04 0C 03 FF
8x 01 04 4C 00 00 0p 0q FF
8x 01 04 0D 00 FF
8x 01 04 0D 02 FF
8x 01 04 0D 03 FF
8x 01 04 4D 00 00 0p 0q FF
8x 01 04 3E 02 FF
8x 01 04 3E 03 FF
8x 01 04 0E 00 FF
8x 01 04 0E 02 FF
8x 01 04 0E 03 FF
8x 01 04 4E 00 00 0p 0q FF
8x 01 04 33 02 FF
8x 01 04 33 03 FF
Comments
CAM_WB
Normal Auto
Indoor
Outdoor
One Push WB
ATW
Indoor mode
Outdoor mode
One Push WB mode
Auto Tracing White Balance
Manual Control mode
One Push WB Trigger
Manual Control of R Gain
Manual
One Push Trigger
Reset
CAM_RGain
CAM_BGain
CAM_AE
Up
Down
Direct
Reset
pq: R Gain
Manual Control of B Gain
Up
Down
Direct
Full Auto
Manual
Shutter Priority
Iris Priority
Bright
Auto
pq: B Gain
Automatic Exposure mode
Manual Control mode
Shutter Priority Automatic Exposure mode
Iris Priority Automatic Exposure mode
Bright Mode (Manual control)
CAM_SlowShutter
CAM_Shutter
Auto Slow Shutter ON/OFF
Manual
Reset
Shutter Setting
Up
Down
Direct
Reset
pq: Shutter Position
Iris Setting
CAM_Iris
Up
Down
Direct
Reset
pq: Iris Position
Gain Setting
CAM_Gain
Up
Down
Direct
Reset
pq: Gain Position
Bright Setting
CAM_Bright
CAM_ExpComp
Up
Down
Direct
On
pq: Bright Position
Exposure Compensation ON/OFF
Off
Reset
Exposure Compensation Amount Setting
Up
Down
Direct
On
pq: ExpComp Position
CAM_Backlight
Back Light Compensation ON/OFF
Off
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Command List (3/5)
Command Set
CAM_AE_Response
CAM_SpotAE
Command
DIRECT
On
Command Packet
8x 01 04 5D pp FF
8x 01 04 59 02 FF
Comments
pp: 01 to 20 (hex) Default value: 01
Spot Automatic Exposure Setting
Off
8x 01 04 59 03 FF
Position
On
8x 01 04 29 0p 0q 0r 0s FF
8x 01 04 3D 02 FF
8x 01 04 3D 03 FF
8x 01 04 02 00 FF
pq: X (0 to F), rs: Y (0 to F)
Wide-D ON/OFF
CAM_WD
Off
CAM_Aperture
Reset
Up
Aperture Control
8x 01 04 02 02 FF
Down
Direct
On
8x 01 04 02 03 FF
8x 01 04 42 00 00 0p 0q FF
8x 01 04 52 02 FF
pq: Aperture Gain
CAM_HR
High-Resolusion Mode ON/OFF
Off
8x 01 04 52 03 FF
CAM_LR_Reverse
CAM_Freeze
On
8x 01 04 61 02 FF
Mirror Image ON/OFF
Still Image ON/OFF
Picture Effect Setting
Off
8x 01 04 61 03 FF
On
8x 01 04 62 02 FF
Off
8x 01 04 62 03 FF
CAM_PictureEffect
Off
8x 01 04 63 00 FF
Neg.Art
B&W
On
8x 01 04 63 02 FF
8x 01 04 63 04 FF
CAM_PictureFlip
CAM_ICR
8x 01 04 66 02 FF
Picture flip ON/OFF
Off
8x 01 04 66 03 FF
On
8x 01 04 01 02 FF
Infrared Mode ON/OFF
Auto dark-field mode On/Off
Off
8x 01 04 01 03 FF
CAM_AutoICR
On
8x 01 04 51 02 FF
Off
8x 01 04 51 03 FF
Threshold
Reset
Set
8x 01 04 21 00 00 0p 0q FF
8x 01 04 3F 00 0p FF
8x 01 04 3F 01 0p FF
8x 01 04 3F 02 0p FF
8x 01 04 3F 00 7F FF
8x 01 04 3F 01 7F FF
8x 01 04 3F 02 7F FF
8x 01 04 23 0X 0p 0p 0q 0q FF
pq: ICR ON t OFF threshold level
CAM_Memory
CAM_Custom
p: Memory Number (=0 to 5)
Recall
Reset
Set
Starts in this mode at Power ON.
Recall
Write
CAM_MemSave
CAM_Display
X:00 to 07 (Address) Total 16 Byte
ppqq: 0x0000 to 0xFFFF (Data)
On
8x 01 04 15 02 FF
(8x 01 06 06 02 FF)
8x 01 04 15 03 FF
(8x 01 06 06 03 FF)
8x 01 04 15 10 FF
(8x 01 06 06 10 FF)
Display ON/OFF
Off
On/Off
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Command List (4/5)
Command Set
Command
Command Packet
Comments
CAM_Title
Title Set1
8x 01 04 73 1L 00 nn pp
qq rr 00 00 00 00 00 FF
L: Line Number, nn: H-position
pp: Color, qq: Blink rr: Opening Title
Title Set2
Title Set3
8x 01 04 73 2L mm nn pp
qq rr ss tt uu vv ww FF
L: Line Number,
mnpqrstuvw: Setting of characters (1 to 10)
8x 01 04 73 3L mm nn pp
qq rr ss tt uu vv ww FF
L: Line Number,
mnpqrstuvw: Setting of characters (11 to 20)
Title Clear
On
8x 01 04 74 1p FF
8x 01 04 74 2p FF
8x 01 04 74 3p FF
8x 01 04 75 02 FF
8x 01 04 75 03 FF
8x 01 04 75 10 FF
Title Setting clear (p: 0 to a, f= all lines)
Title display On/Off (0 to a, f= all lines)
Off
CAM_Mute
On
Mute ON/OFF
Off
On/Off
SetMask
CAM_PrivacyZone
8x 01 04 76 mm nn
0r 0r 0s 0s FF
mm: Mask Settings
nn 00: Modify, 01: New
rr: W, ss:H
Display
8x 01 04 77 pp pp pp pp FF
Mask Display ON/OFF
pp pp pp pp: Mask Settings (0:OFF, 1:ON)
SetMaskColor
8x 01 04 78 pp pp pp pp
qq rr FF
pp pp pp pp: Mask Color Settings
qq: Color Setting when 0 is selected
rr: Color Setting when 1 is selected
SetPanTiltAngle
8x 01 04 79 0p 0p 0p
0q 0q 0q FF
Pan/Tilt Angle Settings
ppp: Pan
qqq: Tilt
SetPTZMask
8x 01 04 7B mm 0p 0p 0p
0q 0q 0q 0r 0r 0r 0r FF
Pan/Tilt/Zoom Settings for Mask
ppp: Pan, qqq: Tilt, rrrr: Zoom
Non_InterlockMask
8x 01 04 6F mm
mm: Non_Interlock Mask Settings
pp: X, q: Y, rr: W, ss: H
0p 0p 0q 0q 0r 0r 0s 0s FF
GridOn
GridOff
CenterLineOn
Off
8x 01 04 7C 02 FF
8x 01 04 7C 03 FF
8x 01 04 7C 04 FF
8x 01 04 17 00 FF
8x 01 04 17 02 FF
8x 01 04 22 0p 0q 0r 0s FF
8x 01 04 55 00 FF
8x 01 04 55 01 FF
8x 01 04 05 00 FF
8x 01 04 05 02 FF
8x 01 04 05 03 FF
8x 01 04 05 2p FF
8x 01 04 05 3p FF
8x 01 04 05 40 FF
8x 01 04 45 0p 0q 0r 0s FF
Grid Display ON/OFF
Grid/Center Line Display Off
Center Line Display On
CAM_KeyLock
Camera Control Enable/Disable
On
CAM_IDWrite
pqrs: Camera ID (=0000 to FFFF)
Internal mode
CAM_ExternalLock
INT
Line Lock
Stop
Line Lock mode
CAM_VPhase
Up
Down
Up (Step)
Down (Step)
Reset
p=step (1-7)
Restore Factory Settings
Direct
pqrs: V-Phase (0000~)
(NTSC: 0000 to 20Chex, PAL: 0000 to 270hex)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Command List (5/5)
Command Set
Command
On
Command Packet
Comments
CAM_MD
8x 01 04 1B 02 FF
Motion Detection On/Off
Off
8x 01 04 1B 03 FF
Function Set
8x 01 04 1C 0m 0n 0p 0q 0r 0s FF
m: Display mode
n: Detection Frame Set (0 to F)
pq: Threshold Level (00 to FF)
rs: Interval Time set (00 to FF)
Window Set
8x 01 04 1D 0m 0p 0q 0r 0s FF
m: Select Detection Frame (0, 1, 2, 3)
p: Start Horizontal Position (00 to 0B)
q: Start Vertical Position (00 to 07)
r: Stop Horizontal Position (01 to 0C)
s: Stop Vertical Position (01 to 08)
Alarm (Reply)
On
y0 07 04 1B 0p FF
p: Detection Frame Number
CAM_Continuous
ZoomPosReply
8x 01 04 69 02 FF
ZoomPosition data Continuous Output On/Off
Off
8x 01 04 69 03 FF
(Reply)
y0 07 04 69 0p 0p 0q 0q 0q 0q FF
pp: D-Zoom Position
* 00: When Zoom Mode is Combine
qqqq: Zoom Position
CAM_
8x 01 04 6A 00 00 0p 0p FF
8x 01 04 24 mm 0p 0p FF
pp: Interval Time [Vertical timing]
ReplyIntervalTimeSet
CAM_RegisterValue
mm: Register No. (=00-7F)
pp: Register Value (=00-7F)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Inquiry Command List (1/3)
Inquiry Command
Command Packet
Inquiry Packet
y0 50 02 FF
Comments
On
CAM_PowerInq
8x 09 04 00 FF
y0 50 03 FF
Off
CAM_ZoomPosInq
8x 09 04 47 FF
8x 09 04 06 FF
y0 50 0p 0q 0r 0s FF
y0 50 02 FF
pqrs: Zoom Position
D-Zoom On
CAM_DZoomModeInq
y0 50 03 FF
D-Zoom Off
Combine Mode
Separate Mode
pq: D-Zoom Position
Auto Focus
CAM_DZoomC/SModeInq
8x 09 04 36 FF
y0 50 00 FF
y0 50 01 FF
CAM_DZoomPosInq
CAM_FocusModeInq
8x 09 04 46 FF
8x 09 04 38 FF
y0 50 00 00 0p 0q FF
y0 50 02 FF
y0 50 03 FF
Manual Focus
pqrs: Focus Position
CAM_FocusPosInq
8x 09 04 48 FF
8x 09 04 28 FF
8x 09 04 58 FF
y0 50 0p 0q 0r 0s FF
y0 50 0p 0q 0r 0s FF
y0 50 02 FF
CAM_FocusNearLimitInq
CAM_AFSensitivityInq
pqrs: Focus Near Limit Position
AF Sensitivity Normal
AF Sensitivity Low
Normal AF
Interval AF
Zoom Trigger AF
pq: Movement Time, rs: Interval
Auto
y0 50 03 FF
CAM_AFModeInq
8x 09 04 57 FF
y0 50 00 FF
y0 50 01 FF
y0 50 02 FF
CAM_AFTimeSettingInq
CAM_WBModeInq
8x 09 04 27 FF
8x 09 04 35 FF
y0 50 0p 0q 0r 0s FF
y0 50 00 FF
y0 50 01 FF
In Door
y0 50 02 FF
Out Door
y0 50 03 FF
One Push WB
ATW
y0 50 04 FF
y0 50 05 FF
Manual
CAM_RGainInq
CAM_BGainInq
CAM_AEModeInq
8x 09 04 43 FF
8x 09 04 44 FF
8x 09 04 39 FF
y0 50 00 00 0p 0q FF
y0 50 00 00 0p 0q FF
y0 50 00 FF
pq: R Gain
pq: B Gain
Full Auto
y0 50 03 FF
Manual
y0 50 0A FF
Shutter Priority
Iris Priority
Bright
y0 50 0B FF
y0 50 0D FF
CAM_SlowShutterModeInq
8x 09 04 5A FF
y0 50 02 FF
Auto
y0 50 03 FF
Manual
CAM_ShutterPosInq
CAM_IrisPosInq
8x 09 04 4A FF
8x 09 04 4B FF
8x 09 04 4C FF
8x 09 04 4D FF
8x 09 04 3E FF
y0 50 00 00 0p 0q FF
y0 50 00 00 0p 0q FF
y0 50 00 00 0p 0q FF
y0 50 00 00 0p 0q FF
y0 50 02 FF
pq: Shutter Position
pq: Iris Position
pq: Gain Position
pq: Bright Position
On
CAM_GainPosInq
CAM_BrightPosInq
CAM_ExpCompModeInq
y0 50 03 FF
Off
CAM_ExpCompPosInq
CAM_BacklightModeInq
8x 09 04 4E FF
8x 09 04 33 FF
y0 50 00 00 0p 0q FF
y0 50 02 FF
pq: ExpComp Position
On
y0 50 03 FF
Off
CAM_AE_ResponseInq
CAM_SpotAEModeInq
8x 09 04 5D FF
8x 09 04 59 FF
y0 50 pp FF
pp: 01 to 20 (hex)
On
y0 50 02 FF
y0 50 03 FF
Off
CAM_SpotAEPosInq
CAM_WDModeInq
8x 09 04 29 FF
8x 09 04 3D FF
y0 50 0p 0q 0r 0s FF
y0 50 02 FF
pq: X position, rs: Y position
On Wide-D
Off
y0 50 03 FF
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Inquiry Command List (2/3)
Inquiry Command
CAM_ApertureInq
CAM_HRModeInq
Command Packet
8x 09 04 42 FF
Inquiry Packet
y0 50 00 00 0p 0q FF
y0 50 02 FF
Comments
pq: Aperture Gain
8x 09 04 52 FF
On Hi-Resolution
y0 50 03 FF
Off
CAM_LR_ReverseModeInq
CAM_FreezeModeInq
8x 09 04 61 FF
8x 09 04 62 FF
8x 09 04 63 FF
y0 50 02 FF
On
y0 50 03 FF
Off
y0 50 02 FF
On
y0 50 03 FF
Off
CAM_PictureEffectModeInq
y0 50 00 FF
Off
y0 50 02 FF
Neg.Art
B&W
On
y0 50 04 FF
CAM_PictureFlipModeInq
CAM_ICRModeInq
8x 09 04 66 FF
8x 09 04 01 FF
8x 09 04 51 FF
y0 50 02 FF
y0 50 03 FF
Off
y0 50 02 FF
On
y0 50 03 FF
Off
CAM_AutoICRModeInq
y0 50 02 FF
On
y0 50 03 FF
Off
CAM_AutoICRThresholdInq
CAM_MemoryInq
8x 09 04 21 FF
8x 09 04 3F FF
8x 09 04 23 0X FF
y0 50 00 00 0p 0q FF
y0 50 pp FF
pq: ICR ON t OFF Threshold Level
pp: Last Recall Memory No.
CAM_MemSaveInq
y0 50 0p 0p 0q 0q FF
X: 00 to 07 (Address)
ppqq: 0x0000 to 0xFFFF (Data)
CAM_DisplayModeInq
CAM_TitleDisplayModeInq
CAM_MuteModeInq
8x 09 04 15 FF
(8x 09 06 06 FF)
8x 09 04 74 FF
y0 50 02 FF
On
y0 50 03 FF
Off
y0 50 02 FF
On
y0 50 03 FF
Off
8x 09 04 75 FF
y0 50 02 FF
On
y0 50 03 FF
Off
CAM_PrivacyDisplayInq
CAM_PrivacyPanTiltInq
8x 09 04 77 FF
8x 09 04 79 FF
y0 50 pp pp pp pp FF
y0 50 0p 0p 0p 0q 0q 0q FF
pp pp pp pp: Mask Display (0:OFF, 1:ON)
ppp: Pan
qqq: Tilt
CAM_PrivacyPTZInq
8x 09 04 7B mm FF
y0 50 0p 0p 0p 0q 0q 0q 0r 0r
0r 0r FF
mm: Mask Settings
ppp: Pan
qqq: Tilt
rrr: Zoom
CAM_PrivacyMonitorInq
CAM_KeyLockInq
8x 09 04 6F FF
8x 09 04 17 FF
y0 50 pp pp pp pp FF
y0 50 00 FF
pp pp pp pp: Mask is displayed now.
Off
y0 50 02 FF
On
CAM_IDInq
8x 09 04 22 FF
8x 09 04 55 FF
y0 50 0p 0q 0r 0s FF
y0 50 00 FF
pqrs: Camera ID
Internal Mode
CAM_ExternalLockModeInq
y0 50 01 FF
Line Lock Mode
0 degree
CAM_VPhaseSetInq
8x 09 04 25 FF
y0 50 00 FF
y0 50 01 FF
180 degree
CAM_VPhasePosInq
CAM_VersionInq
8x 09 04 45 FF
8x 09 00 02 FF
y0 50 0p 0q 0r 0s FF
y0 50 00 20
pqrs: V-Phase Position
mnpq: Model Code (04xx)
rstu: ROM version
vw: Socket Number (=02)
mn pq rs tu vw FF
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Inquiry Command List (3/3)
Inquiry Command
Command Packet
Inquiry Packet
y0 50 02 FF
Comments
CAM_MDModeInq
8x 09 04 1B FF
On
y0 50 03 FF
Off
CAM_MDFunctionInq
CAM_MDWindowInq
8x 09 04 1C FF
y0 50 0m 0n 0p 0q FF
m: Display mode
n: Detection Frame Set (0 to F)
pq: Threshold Level (0 to FF)
rs: Interval Time set (0 to FF)
8x 09 04 1D 0m FF
y0 50 0p 0q 0r 0s FF
m: Select Detection Frame (0, 1, 2, 3)
p: Start Horizontal Position (00 to 0B)
q: Start Vertical Position (00 to 07)
r: Stop Horizontal Position (01 to 0C)
s: Stop Vertical Position (01 to 08)
CAM_ContinuousZoomPos
ReplyModeInq
8x 09 04 69 FF
y0 50 02 FF
On
y0 50 03 FF
Off
CAM_ReplyIntervalTimeInq
CAM_RegisterValueInq
8x 09 04 6A FF
y0 50 00 00 0p 0p FF
y0 50 0p 0p ff
pp: Interval Time
8x 09 04 24 mm FF
mm: Register No. (00 to 7F)
pp: Register Value (00 to FF)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Block Inquiry Command List
Lens Control System Inquiry Commands.............. Command Packet 8x 09 7E 7E 00 FF
Byte
Bit
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
Comments
Byte
Bit
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
Comments
Byte
Bit
7
Comments
0
0
0
0
0
0
0
0
0
0
0
0
0
0
6
Destination Address
5
4
0
6
12
3
2
Source Address
Focus Near Limit (H)
1
0
0 Completion Message (50h)
0
0
0
0
7
1
0
1
0
0
0
0
0
0
0
0
6
5
DZoomMode 0: Combine
1: Separate
1
2
3
4
5
7
4
3
2
0: Normal 1: Interval
2: Zoom Trigger
13
Focus Near Limit (L)
AF Sensitivity 0: Slow
1: Normal
1
0
7
6
5
4
3
Digital Zoom 1:On 0:Off
0
0
0
0
Focus Mode 0:Manual 1:Auto
0
0
0
0
8
14
Zoom Position (HH)
Focus Position (HH)
Low Contrast Detection 1: Yes
0: No
2
1
0
Camera Memory Recall 1:
Executing 0: Stopped
0
0
0
0
0
0
0
0
Focus Command 1: Executing
0: Stopped
Zoom Command 1: Executing
0: Stopped
9
7
6
5
4
3
2
1
0
1 Terminator (FFh)
Zoom Position (HL)
Focus Position (HL)
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
15
10
Zoom Position (LH)
Focus Position (LH)
0
0
0
0
0
0
0
0
11
Zoom Position (LL)
Focus Position (LL)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Camera Control System Inquiry Commands......... Command Packet 8x 09 7E 7E 01 FF
Byte
Bit
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
Comments
Byte
Bit
Comments
Byte
Bit
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
Comments
7
0
0
0
0
0
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
0
0
0
0
Destination Address
6
12
0
Gain Position
Source Address
WB Mode
0
0
0
0
0
0
0
0 Completion Message (50h)
1
0
1
0
0
0
0
0
0
0
0
7
13
14
15
1
2
3
4
5
Bright Position
Aperture Gain
0
0
0
0
0
0
0
8
Exposure Mode
Exposure Comp. Position
R Gain (H)
0
1 Terminator (FFh)
0
0
0
0
0
1
1
1
1
1
1
1
High-Resolution 1: On 0: Off
Wide-D 1: On 0: Off
9
Spot AE 1: On 0: Off
Back Light 1:On 0:Off
R Gain (L)
Exposure Comp. 1:On 0:Off
Slow Shutter 1:Auto 0:Manual
0
0
0
0
0
0
0
10
Shutter Position
B Gain (H)
0
0
0
0
0
0
0
11
Iris Position
B Gain (L)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Other Inquiry Commands ........................................ Command Packet 8x 09 7E 7E 02 FF
Byte
Bit
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
Comments
Byte
Bit
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
Comments
Byte
Bit
7
Comments
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
6
Destination Address
5
External Lock 1: Provided
0: Not provided
6
0
4
3
2
Memory 1: Provided 0: Not
provided
12
Source Address
Clock 1: Provided 0: Not
provided
ICR 1: Provided 0: Not
provided
0 Completion Message (50h)
1
1
0
7
6
5
4
0
0
System 1:PAL 0:NTSC
1
7
1
2
3
4
5
0
0
0
0
0
0
External Lock Mode 1: Line
Lock 0: Internal
0
13
0
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
0
V-Phase (H)
0
0
8
0
0
0
Auto ICR 1: On 0: Off
Camera ID (HH)
Key Lock 1: On 0: Off
Power 1:On 0:Off
14
0
0
0
0
0
V-Phase (L)
0
0
ICR 1: On 0: Off
9
Freeze 1:On 0:Off
1 Terminator (FFh)
LR Reverse 1:On 0:Off
1
1
1
1
1
1
1
Camera ID (HL)
0
0
15
0
0
0
0
0
0
Privacy Zone 1: On 0: Off
Mute 1: On 0: Off
10
Title Display 1: On 0: Off
Display 1: On 0: Off
Camera ID (LH)
0
0
0
0
0
0
0
0
0
0
0
11
Camera ID (LL)
Picture Effect Mode
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Enlargement Function Query Command ............... Command Packet 8x 09 7E 7E 03 FF
Byte
Bit
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
Comments
Byte
Bit
7
Comments
Byte
Bit
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
Comments
0
0
0
0
0
0
0
0
0
6
Destination Address
5
4
6
0
11
3
2
Advanced Privacy (1:
AF Interval Time (H)
Source Address
Provided, 0: Not provided)
1
0
Alarm (1: Provided, 0: Not
provided)
0
0
0
0
0 Completion Message (50h)
Picture flip (1: Provided, 0:
Not provided)
1
0
1
0
0
0
0
0
0
0
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
0
0
7
1
AF Interval Time (L)
12
13
14
15
AE Response
0
0
0
0
0
2
8
0
0
SpotAE Position (X)
0
Digital Zoom Position (H)
0
0
0
0
0
0
0
0
0
0
0
0
0
3
4
5
9
0
0
SpotAE Position (Y)
0
Digital Zoom Position (L)
0
0
0
0
0
0
0
0
0
0
0
0
0
1 Terminator (FFh)
10
1
1
1
1
1
1
1
MD (1: On, 0: Off)
AF Activation Time (H)
Alarm (1: On, 0: Off)
Picture flip (1: On, 0: Off)
0
0
0
0
AF Activation Time (L)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
VISCA Command Setting Values
Gain
0F
0E
0D
0C
0B
0A
09
08
07
06
05
04
03
02
01
00
28 dB
26 dB
24 dB
22 dB
20 dB
18 dB
16 dB
14 dB
12 dB
10 dB
8 dB
Exposure control (1/2)
NTSC (s)
1/10000
1/6000
1/4000
1/3000
1/2000
1/1500
1/1000
1/725
1/500
1/350
1/250
1/180
1/125
1/100
1/90
PAL (s)
1/10000
1/6000
1/3500
1/2500
1/1750
1/1250
1/1000
1/600
1/425
1/300
1/215
1/150
1/120
1/100
1/75
Shutter Speed
15
14
13
12
11
10
0F
0E
0D
0C
0B
0A
09
08
07
06
05
04
03
02
01
00
11
10
0F
0E
0D
0C
0B
0A
09
08
07
06
05
04
03
02
01
00
6 dB
4 dB
+2 dB
0
–3 dB
1/60
1/50
1/30
1/25
1/15
1/12
1/8
1/6
1/4
1/3
1/2
1/2
1/1
1/1
Iris
F1.6
F2
F2.4
F2.8
F3.4
F4
F4.8
F5.6
F6.8
F8
F9.6
F11
F14
F16
F19
F22
F28
CLOSE
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Zoom Ratio and Zoom Position
Exposure control (2/2)
(for reference)
IRIS
F1.6
GAIN
28 dB
Bright
1F
1E
1D
1C
1B
1A
19
18
17
16
15
14
13
12
11
10
0F
0E
0D
0C
0B
0A
09
08
07
06
05
04
03
02
01
00
0E
0D
0C
0B
0A
09
08
07
06
05
04
03
02
01
00
Zoom Ratio
Optical Zoom
Positon Data
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F1.6
F2
26 dB
24 dB
22 dB
20 dB
18 dB
16 dB
14 dB
12 dB
10 dB
8 dB
6 dB
4 dB
2 dB
0
×36 Lens
×1
0000
166F
1FF0
257D
2940
2C02
2E2B
2FEE
316A
32B2
33D4
34D9
35C8
36A4
3773
3836
38F0
39A0
3A49
3AE8
3B7F
3C0C
3C8E
3D06
3D73
3DD4
3E2C
3E7C
3EC2
3F00
3F38
3F68
3F94
3FBD
3FDF
4000
×2
×3
×4
×5
×6
×7
×8
×9
×10
×11
×12
×13
×14
×15
×16
×17
×18
×19
×20
×21
×22
×23
×24
×25
×26
×27
×28
×29
×30
×31
×32
×33
×34
×35
×36
0
F2.4
F2.8
F3.4
F4
0
0
0
0
F4.8
F5.6
F6.8
F8
0
0
0
0
F9.6
F11
F14
F16
F19
F22
F28
CLOSE
7
0
0
0
0
0
0
0
0
Exposure Comp.
10.5 dB
9 dB
7.5 dB
6 dB
4.5 dB
3 dB
1.5 dB
0 dB
–1.5 dB
–3 dB
–4.5 dB
–6 dB
–7.5 dB
–9 dB
–10.5 dB
6
5
4
3
2
1
0
–1
–2
–3
–4
–5
–6
–7
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Digital Zoom Combine mode
Title setting
Line number
H-position
00 to 0A
X12-NTSC/PAL
00 to 17
00: Dose not blink
01: Blinks
Digital Zoom
Ratio
Digital Zoom
Position Data
Blink
×1
×2
4000
6000
6A80
7000
7300
7540
76C0
7800
78C0
7980
7A00
7AC0
00
01
02
03
04
05
06
White
×3
Yellow
Violet
Red
×4
×5
Color
×6
Cyan
Green
Blue
×7
×8
×9
×10
×11
×12
00
A
01
B
02
C
03
D
04
05
F
06
G
07
H
0f
P
E
0c
M
14
U
08
I
09
J
0a
K
12
S
0b
L
0d
N
15
V
1d
!
0e
O
Digital Zoom Separate mode
X12-NTSC/PAL
10
Q
11
R
13
T
16
W
1e
1
17
X
1f
2
Digital Zoom
Ratio
Digital Zoom
Position Data
18
Y
19
Z
1a
&
22
5
1b
1c
?
×1
×2
00
80
20
3
21
4
23
6
24
7
25
8
26
9
27
0
×3
AA
C0
CC
D5
DB
E0
E3
E6
E8
EB
×4
28
À
29
È
2a
Ì
2b
Ò
33
Ê
2c
Ù
2d
Á
35
Æ
3d
Ï
2e
É
2f
Í
×5
×6
30
Ó
31
Ú
39
Ñ
41
$
32
Â
3a
Ç
34
Ô
36
Œ
3e
Ö
37
Ã
3f
Ü
47
¡
×7
×8
38
Õ
3b
ß
3c
Ä
×9
×10
×11
×12
40
Å
42
F
43
¥
44
DM
4c
.
45
£
46
¿
48
ø
49
“
4a
:
4b
‘
4d
,
4e
/
4f
-
Lens control
Register Setting
0000 to 4000 to 7AC0
Zoom Position
Wide end
Optical
Digital
Register No.
Value
Tele end
Tele end
1000
to C000
Near end
VISCA
00
01
02
00
03
9600 bps
19200 bps
38400 bps
English
Focus Position
Far end
Baud Rate
00
1000: Over Inf
2000: 20 m
3000: 10 m
4000: 5 m
OSD
60
Language
Chinese
As the distance on the left
will differ due to temperature
characteristics, etc., use as
approximate values.
5000: 3 m
Focus Near
Limit
6000: 2 m
7000: 1.5 m
8000: 32 cm
9000: 9.5 cm
A000: 4.5 cm
B000: 2 cm
C000: 1 cm
* The lower 1 byte is fixed at
00.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Command List
Others
AF Active Time*
AF Interval Time*
Spot AE X position
Spot AE Y position
R Gain
00
00
00
00
00
00
00
to
to
to
to
to
to
to
FF
FF
0F
0F
FF
FF
0F
B Gain
Aperture Level
020C (NTSC)
0270 (PAL)
V-Phase
00
01
to
to
AE Response
20
AutoICR ON t
OFF Threshold Level
00
to
1C
MD Threshold Level
00
00
00
00
to
to
to
to
FF
FF
0C
08
MD Interval Time*
MD Set Horizontal Position
MD Set Vertical Position
PrivacyZone X position
(starting point)
00
00
to
to
0F
PrivacyZone Y position
(starting point)
0B
PrivacyZone Mask Width
PrivacyZone Mask Height
00
00
to
to
10
0C
* Unit: One second
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Picture elements FCB-EX1010: Approx. 380K pixels
FCB-EX1010P: Approx. 440K pixels
Horizontal resolution
Electronic shutter speed
FCB-EX1010: 1/4 to
1/10000 sec. (20 steps)
FCB-EX1010P: 1/3 to
NTSC: 530 TV lines (WIDE end)
PAL: 530 TV lines (WIDE end)
1/10000 sec. (20 steps)
AUTO, ATW, Indoor, Outdoor,
One Push WB, Manual WB
Auto/Manual (-3 to 28 dB, 16 steps)
ON/OFF
Lens
36× zoom
White balance
F= 3.4 mm (WIDE) to 122.4 mm
(TELE), F1.6 to F4.5
Zoom movement speed
Gain
Wide dynamic
(NTSC)
Aperture control 16 steps
Optical WIDE/Optical TELE 4.0 sec
Optical WIDE/Digital TELE 6.0 sec
Digital WIDE/Digital TELE 2.1 sec
(PAL)
Preset
6-POSITIONS
Serial interface VISCA protocol (TTL/CMOS)
9.6 Kbps, 19.2 Kbps, 38.4 Kbps,
Stop bit, 1/2 bit
Optical WIDE/Optical TELE 4.0 sec
Optical WIDE/Digital TELE 6.2 sec
Digital WIDE/Digital TELE 2.3 sec
Focus Movement time
Video Output
VBS: 1.0 Vp-p (Sync negative),
Y/C Output
Storage temperature/Humidity
–20 to 60 °C (–4 to 140 °F)/20 to 95 %
Operating temperature/Humidity
0 to 50 °C (32 to 122 °F)/20 to 80 %
∞ to Near
1.0 sec
Digital zoom
12× (432× with optical zoom)
Angle of view (H)
Power requirements/Power consumption
6 to 12 V DC/2.6 W (4.9 W)
Approx. 57.8 degree (WIDE end) to
Approx. 1.7 degree (TELE end)
Weight
230 g (8.1 oz.)
Min. working distance
320 mm (WIDE end), 1500 mm
Dimensions
50.0 × 57.5 × 87.9 mm
(2 × 2 3/8 × 3 1/2 in.) (w/h/d)
(TELE end)
Sync system
Internal/External (V-Lock)
Min. illumination
Design and specifications are subject to change
without notice.
1.4 lux/1/60 sec (NTSC), 1/50 sec
(PAL) (Typical value)
0.1 lux/1/4 sec (NTSC), 1/3 sec
(PAL) (Typical value)
ICR-ON Mode
0.01 lux/1/4 sec (NTSC), 1/3 sec
(PAL)
Recommended illumination
100 to 100,000 lux
50 dB (Weight ON)
Back light compensation
ON/OFF
S/N ratio
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Dimensions
Front
Left side
Within a depth of 3 mm
(1/8 in.) or less form the side
Right side
Top
Within a depth of 2 mm (3/32 in.)
or less form the top surface
Within a depth of 3 mm
(1/8 in.) or less form the side
Bottom
(Tripod screw for camera)
Within a depth of 7 mm (9/32 in.) or less
form the bottom surface
Back
Within a depth of 3 mm (1/8 in.) or
less form the bottom surface
Unit: mm (inches)
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
CN600
J.S.T. Mfg Co. S4B-ZR-SM4A-TF(LF)
Pin assignment
PinNo.
Name
Level
1
2
3
4
Y_Out
GND (for Y signal)
C_Out
GND (for C signal)
CN702
KYOCERA ELCO Co. 086222012101848+
PinNo.
Name
Level
1
2
GND
GND
3
KEY AD0
KEY AD1
KEY AD2
KEY AD3
KEY AD4
KEY AD5
KEY AD6
KEY AD7
NC
4
5
6
7
8
9
10
11
12
Strobe
Strobe signal specifications
CN601
KYOCERA ELCO Co. 00 6200 509 130 000+
PinNo.
Name
Level
1
RxD
TxD
CMOS 5V (low: max 0.8V,
high: min 2.0V) Read Data
2
CMOS 5V (low: max 0.1V,
high: min 4.4V) Send Data
3
4
5
6
7
8
GND (for RxD&TxD)
DC IN
9.0V 3V
GND (for DC IN)
VBS OUT
1.0V 0.2V
GND (for VBS OUT)
V LOCK PULSE
External VD-Lock Pulse
(EX.FV: Negative, 3Vp-p
50% duty)
9
GND (VL PULSE)
52
Download from Www.Somanuals.com. All Manuals Search And Download.
|