Display items for CD / Repeat and shuffle play / Playback USB devices /
Display items for USB / Listening to music on a Mass Storage Class type audio
device / Listening to music on “Walkman” (ATRAC Audio Device) / Adjusting the
sound characteristics / Customizing the equalizer curve / Adjusting setup items
CDX-GT410U
SET UP
RADIO
Location of controls and basic operations
Detaching the front panel
Setting the clock
Storing stations automatically
— BTM
You can detach the front panel of this unit to
prevent theft.
The clock uses a 24-hour digital indication.
Notes
Disc slot
Insert the disc (label side up), and playback
(+)/ (–) buttons
• Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
• Pressing the RESET button will erase the clock
setting and some stored contents.
Main unit
To control CD, the same as / (GP/
ALBM –/+) on the unit.
The unit selects strong signal stations and stores
them. You can store up to 6 stations per band
(FM1, FM2, FM3, MW, or LW).
1 Press and hold the select button.
starts automatically. You can play CD-DA
(also containing CD TEXT), CD-R/CD-RW
(MP3/WMA/AAC files also containing
Multi Session) and ATRAC CD (ATRAC3
and ATRAC3plus format).
1 Press .
The setup display appears.
SCRL (scroll) button
The unit is turned off.
12 3
4
5
6
7 8
2 Press the select button repeatedly
until “CLOCK-ADJ” appears.
To scroll the display item.
2 Press , then pull it off towards you.
Caution
Number buttons
Number buttons
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
OFF
CD/MD*1/USB*2:
3 Press +.
To receive stored stations (press); store
stations (press and hold).
/: GP*5/ALBM*6 –/+
To skip groups/albums (press); skip
groups/albums continuously (press and
hold)*7.
The hour indication flashes.
Display window
USB terminal
PUSH SELECT
EQ3
SEEK
SOURCE
SEEK
4 Rotate the volume control dial to set
1 Press repeatedly until
“TUNER” appears.
the hour and minute.
To connect to the USB device.
*1 When an MD changer is connected.
*2 When a USB device is connected.
*3 When a CD/MD changer is connected.
*4 When an ATRAC Audio Device is connected.
*5 When an ATRAC CD is played.
*6 When an MP3/WMA/AAC is played.
*7 If the changer/USB device is connected, the
operation is different.
To move the digital indication, press
–/+.
To change the band, press
repeatedly. You can select from FM1, FM2,
FM3, MW or LW.
PTY
MODE
(eject) button
: REP
DIM
GP/ALBM
REP
3
SHUF
PAUSE
: SHUF
To eject the disc.
AUX
DSPL
1
2
4
5
6
AF/TA
: PAUSE*8
5 Press the select button.
PTY (Program Type) button
The setup is complete and the clock starts.
2 Press and hold the select button.
To pause playback. To cancel, press
again.
Attaching the front panel
To select PTY in RDS. After pressing
, press –/+ to search for a
station.
CDX-GT410U
The setup display appears.
Engage part of the front panel with part of
the unit, as illustrated, and push the left side into
position until it clicks.
Tip
9 q; qa qs qdqfqg
qh
qj qk
Radio:
3 Press the select button repeatedly
until “BTM” appears.
You can set the clock automatically with the RDS
feature. For details, see “Adjusting setup items” on the
reverse side of the sheet, and set to “CT-ON” (Clock
Time).
*8 When playing back on this unit.
To receive stored stations (press); store
stations (press and hold).
(front panel release) button
Notes
4 Press +.
Before using the card remote commander for the
first time, remove the insulation film.
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears,
it cannot be operated with the card remote
commander unless on the unit is
pressed, or a disc is inserted to activate the unit
first.
Card remote commander
RM-X151
SEEK –/+ buttons
AF/TA button
The unit stores stations in order of frequency
on the number buttons.
CD/MD*1/USB*2:
AF (Alternative Frequencies)/TA (Traffic
Announcement), TP (Traffic Programme):
Each time you press , the item
changes as follows:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
A beep sounds when the setting is stored.
wa
ws
qd
1
4
ql
OFF
ATT
AF-ON TA-ON AF,TA-ON
AF,TA-OFF
SOURCE
SEL
MODE
Radio:
To tune in stations automatically (press);
find a station manually (press and hold).
AUX input jack
Warning if your car’s ignition has no
ACC position
A
B
+
–
To connect a portable audio device.
Receptor for the card remote
OFF button
Be sure to set the Auto Off function. The unit
will shut off completely and automatically in
the set time after the unit is turned off, which
prevents battery drain. If you do not set the
Auto Off function, press and hold
until the display disappears each time you
turn the ignition off.
wd
wf
wg
commander
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
To power off; stop the source.
MODE button
EQ3 (equalizer) button
DSPL
SCRL
qf
To select the radio band (FM/MW/LW);
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
To adjust the equalizer curve, see
“Customizing the equalizer curve” on the
reverse side of this sheet.
select the unit*3; select the play mode*4.
()/ () buttons
1
4
2
5
3
6
To control CD/radio/MD/USB, the same as
–/+ on the unit.
VOL (volume) +/– button
DSPL (display)/DIM (dimmer) button
To change display items (press); change the
display brightness (press and hold).
+
VOL
–
To adjust volume.
RESET button (located behind the front
w;
Volume control dial/select button
ATT (attenuate) button
panel)
To adjust volume (rotate); select setup items
(press and rotate).
To attenuate the sound. To cancel, press
again.
Detach the front panel and press the RESET
button with a pointed object, such as a ball-
point pen.
SOURCE button
SEL (select) button
To power on; change the source (Radio/CD/
The same as the select button on the unit.
MD*1/USB/AUX).
© 2006 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|