4-485-163-02 (1)
Video Projector
Operating Instructions
Before operating the unit, please read this manual and supplied Quick
Reference Manual thoroughly and retain them for future reference.
VPL-VW600ES
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of Controls
Front/Right Side
Warning indicators
Warning indicators
Others
a ON/STANDBY indicator
j 3D Sync Transmitter
Located on the inside of the lamp cover.
k Ventilation holes (exhaust)
Connectors
l Ventilation holes (intake)
m Remote control detector
e HDMI 1/HDMI 2 connector
f REMOTE connector
Connects to a computer, etc. for remote
control.
g IR IN connector
Inputs signals to control the unit.
h TRIGGER 1/TRIGGER 2
connector (page 37)
Front/Right Side
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear/Left Side/Bottom
The buttons on the control panel have the same names as those on the remote control.
Control panel
Control panel
Others
a ?/1 (ON/STANDBY) button
f Remote control detector
g Ventilation holes (intake)
d M/m/</, (arrow)/
(enter)
button (page 22)
i Projector suspension support
attaching hole (page 65)
4
Rear/Left Side/Bottom
Download from Www.Somanuals.com. All Manuals Search And Download.
a LIGHT button
Illuminates the buttons on the remote
control.
Remote Control
b Infrared transmitter
c ?/1 (ON/STANDBY) button
e CALIBRATED PRESET buttons
f LENS ADJUSTMENT buttons
i M/m/</, (arrow)/
(enter)
buttons (page 22)
o GAMMA CORRECTION button
q REALITY CREATION button
r ADVANCED IRIS button
s CONTRAST ENHANCER button
t SHARPNESS +/– button
v BRIGHTNESS +/– button
Remote Control
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Preparations
This section describes how to install the unit and screen, how to connect the equipment from
which you want to project the picture, etc.
Note
Installing the Unit
When using a screen with an uneven surface,
stripes pattern may rarely appear on the screen
The installation distance between the unit
and a screen varies depending on the size of
the screen or whether or not you use the lens
shift features. Install this unit so that it fits
the size of your screen. For details on the
distance between the unit and the screen (the
projection distance) and the size of projected
video, see “Projection Distance and Lens
depending on the distance between the screen
and the unit or the zooming magnifications.
This is not a malfunction of the unit.
1 Position the unit so that the lens is
parallel to the screen.
Top view
Screen
2 Project an image on the screen and
adjust the picture so that it fits the
screen (page 7).
6
Installing the Unit
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
AdjustingthePicture
Position
Depending on the installation location of the
unit, you may not be able to control it with the
remote control. In this case, point the remote
control at the remote control detector of the
unit or the screen.
Project an image on the screen and then
adjust the picture position.
1 After connecting the AC power cord to
the unit, plug the AC power cord into
a wall outlet.
The ON/STANDBY indicator lights in
red and the unit goes into standby mode.
Remote control
detector
Lights in red.
2 Press the ?/1 (ON/STANDBY) button
to turn on the unit.
The ON/STANDBY indicator flashes in
green, and then lights in green.
Flashes in green for
tens of seconds and
then lights in green.
Tips
• The ?/1 (ON/STANDBY), INPUT, MENU,
and M/m/</,/
(joystick) buttons on
the side panel of the unit function the same as
those on the remote control. The LENS
button functions in the same way as the
LENS ADJUSTMENT (FOCUS, ZOOM,
SHIFT) buttons of the remote control.
• When adjusting the lens, each time you press
the LENS button on the unit, the lens
adjustment function switches between “Lens
Focus,” “Lens Zoom” and “Lens Shift.”
Adjusting the Picture Position
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Adjust the focus.
4 Adjust the picture size.
Press the LENS ADJUSTMENT
Press the LENS ADJUSTMENT
(ZOOM) button to display the Lens
Zoom adjustment window (test pattern).
Then adjust the size of the picture by
pressing the M/m/</, buttons.
(FOCUS) button to display the Lens
Focus adjustment window (test pattern).
Then adjust the focus of the picture by
pressing the M/m/</, buttons.
To make the picture larger, press M/,.
To make the picture smaller, press m/
<.
Tips
• When “Lens Control” is set to “Off” on the
Installation
menu, you cannot adjust the
focus, the picture size or the proper position
by pressing the FOCUS, ZOOM or SHIFT
• When “Test Pattern” is set to “Off” on the
Function
menu, the test pattern is not
Note
Adjust the lens by using buttons on the remote
control or the control panel of the unit. Never
make adjustments by directly turning the lens
with your hands, which may cause damage or
malfunction to the unit.
8
Adjusting the Picture Position
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Adjust the picture position.
To adjust the horizontal position
Press the LENS ADJUSTMENT
(SHIFT) button to display the Lens Shift
adjustment window (test pattern). Then
adjust to the proper position of the
picture by pressing the M/m/</,
buttons.
Press </,.
The picture projected on the screen moves
right or left by a maximum of 31% of the
screen width from the center of the lens.
Top view
31% 1 screen width 31%
: Picture position when moving the
picture to the left at maximum
: Picture position when moving the
picture to the right at maximum
Tip
Whenever you press the
pattern disappears.
button, the test
Note
When adjusting the window position, do not
touch the lens unit, otherwise your fingers may
be pinched by the moving parts.
Adjusting the Picture Position
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Range of movement of the projected
picture
To adjust the vertical position
Press M/m.
0.85V
The picture projected on the screen moves
up by a maximum of 85% or moves down by
a maximum of 80% of the screen height
from the center of the lens.
0.31H
0.31H
Projected Picture
Side view
0.8V
85%
H: Width of the projected picture
V: Height of the projected picture
1 screen
height
80%
: Picture position when moving the
picture upward at maximum
: Picture position when moving the
picture downward at maximum
To adjust the tilt of the installation
surface
If the unit is installed on an uneven surface,
use the front feet (adjustable) to keep the unit
level.
Note
The range to move the picture projected on the
screen can be adjusted only within the octagon
area illustrated below. For details, see
Turn to
adjust.
Front feet (adjustable)
Notes
• If the unit is tilted up or down, the projected
image may be trapezoidal.
• Be careful not to catch your finger when
turning the front feet (adjustable).
10 Adjusting the Picture Position
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Video Equipment or a
Computer
You can enjoy high picture quality by connecting a DVD player/recorder, Blu-ray Disc player/
®
recorder, or PlayStation equipped with HDMI output to the HDMI input of the unit.
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor
picture quality. When pulling out a cable, be sure to pull it out from the plug, not the cable
itself.
• Refer to the operating instructions of the connected equipment.
Computer
Equipment with HDMI
output connectors
Right side of the unit
AV amplifier
Speakers
to HDMI output
HDMI cable (not supplied)
: Video signal flow
Use a high speed HDMI cable on which the cable type logo
is specified. (Sony products are recommended.)
12 Connecting to Video Equipment or a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• Use a high-speed HDMI cable. With a standard HDMI cable, images of 1080p, DeepColor, 3D
video and 4K video may not be displayed properly.
• When connecting an HDMI cable to the unit, make sure the V mark on the upper part of the HDMI
input of the unit and the v mark on the connector of the cable is set at the same position.
• If the picture from equipment connected to the unit with an HDMI cable is not correct, check the
settings of the connected equipment.
• If you set your computer, such as a notebook type, to output the signal to both computer’s display
and this equipment, the picture of the equipment may not appear properly. Set your computer to
output the signal to only the external monitor. For details, refer to the computer’s operating
instructions supplied with your computer. For settings of the computer, consult with the
manufacturer of the computer.
Connecting to Video Equipment or a Computer 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Projecting
This section describes how to operate the unit to view the picture from the equipment connected
to the unit. It also describes how to adjust the quality of the picture to suit your taste.
Turning Off the Power
Projecting the
Picture
1 Press the ?/1 (ON/STANDBY)
button.
A message “POWER OFF?” appears on
the screen.
1 Turn on both the unit and the
equipment connected to the unit.
2 Press the ?/1 (ON/STANDBY) button
2 Press INPUT to display the input
again before the message disappears.
palette on the screen.
The ON/STANDBY indicator flashes in
green and the fan continues to run to
reduce the internal heat. First, the ON/
STANDBY indicator flashes quickly,
during which you will not be able to
light up the ON/STANDBY indicator
with the ?/1 (ON/STANDBY) button.
3 Select the equipment from which you
The fan stops and the ON/STANDBY
indicator changes from flashing green to
remaining red.
want to display images.
Press INPUT repeatedly or press M/m/
(enter) to select the equipment from
which to project.
The power is turned off completely, and you
can disconnect the AC power cord.
Note
Never disconnect the AC power cord while the
indicator is flashing.
You can turn off the unit by holding the ?/1
(ON/STANDBY) button for about 1 second,
instead of performing the above steps.
Example: To view the picture from the
video equipment connected to the HDMI
1 connector of this unit.
To view the picture from
Press INPUT
to display
Equipment connected to the HDMI 1
HDMI 1 connector
Equipment connected to the HDMI 2
HDMI 2 connector
Tip
When “Status” is set to “Off” on the Setup
menu, the input palette does not appear. Press
the INPUT button to switch between input
terminals in sequence.
14 Projecting the Picture
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting/Setting the 3D functions
Watching 3D Video
Images
You can adjust/set the 3D functions by
pressing the 3D button on the remote control
or with the “3D Settings” of the Function
menu. For details, see “3D Settings”
You can enjoy powerful 3D video images,
such as from 3D games and 3D Blu-ray
Discs, using the optional Active 3D Glasses
(TDG-BT500A).
Using the 3D Glasses
1 Turn on the HDMI equipment for 3D
compatibility connected to the unit,
then play the 3D content.
1 Turn on the 3D glasses, and register
them on the unit.
For details on how to register the 3D
glasses, refer to the operating
instructions supplied with the 3D
glasses.
For details on how to play 3D content,
refer to the operating instructions for the
connected equipment.
2 Turn on the unit and project the 3D
2 Put on the 3D glasses.
video image onto the screen.
For details on how to project the image,
3 Turn toward the screen.
Precautions for use
Misoperation may occur if:
• The viewing position is too far from the
projector
• There are other communication devices,
such as a wireless LAN (IEEE802.11 b/g/
n) or a microwave with a bandwidth of 2.4
GHz, near the unit
3 Turn on the 3D glasses, and then put
them on so that they fit comfortably.
For details on how to use the 3D glasses,
Tips
• The factory default setting for ”2D-3D
Display Sel.” is “Auto” to allow projecting
3D video images automatically when the unit
detects 3D signals.
3D glasses communication range
Figure below indicate the communication
range of the 3D glasses. If you try to watch
3D video images from a distance greater
than the communication range or install the
unit outside the communication range, the
3D glasses may not be able to display the
images properly. Also, the distance varies
depending on the environment of the room
and installation environment of the unit.
• To convert 3D video images to 2D video
images, set “2D-3D Display Sel.” to “2D”
Notes
• It may not be possible to display 3D video
image, depending on the type of signal. Set
the “2D-3D Display Sel.” to “3D,” and “3D
Format” to “Side-by-Side” or “Over-Under”
to suit the format of the 3D content you want
• Use the 3D glasses within the
• There are differences in perception of 3D
video images among individuals.
• When the temperature of the usage
environment is low, the 3D effect may be
diminished.
Watching 3D Video Images 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Top or side view
Using the Picture
Position
Projector
You can store up to five combinations of lens
settings (focus, picture size, picture position)
and aspect ratio, and you can recall those
settings.
10 m
10 m
10 m
1 Press POSITION.
10 m
The Picture Position selecting palette is
displayed.
2 Press POSITION repeatedly, or press
M/m/
to select the position.
The settings of the position selected is
recalled.
Store or delete the lens settings and
aspect ratio in the “Picture Position” of
the Screen
A position where lens settings and
aspect ratio are not stored is displayed as
“---.”
16 Using the Picture Position
Download from Www.Somanuals.com. All Manuals Search And Download.
Image of the lens moving
In the example below, the images with
aspect ratio of 1.78:1 (16:9) and 2.35:1 are
projected on a 2.35:1 screen.
When a 1.78:1 (16:9) image is input
When a 2.35:1 image is input
Press the POSITION
button.
The 2.35:1 image expands to fill the screen.
Notes
• After you have selected and confirmed the
lens position, the lens starts to move. Do not
touch, or place anything near, the lens,
otherwise it may cause injury or a
malfunction.
• If you press any button on the remote control
or the unit while the lens is moving, the lens
stops. In this case, select the lens position
again or adjust the lens manually.
• The Picture Position function is not
guaranteed to reproduce the lens settings
precisely.
• When you use the subtended screen angle of
two or more aspects using lens zoom, install
the unit within the specified parameters
With some setting positions, the range of lens
shift may be restricted, even though the unit
is installed within the specified parameters.
Using the Picture Position 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Aspect Ratio According to the
Video Signal
You can select an aspect ratio best suited for
the video signal received.
Press ASPECT.
Each time you press the button, you can
select the “Aspect” setting.You can also
ASPECT
button
Original image
Recommended setting and resultant images
1.85:1 Zoom
1.85:1
Squeezed 1.85:1
2.35:1 Zoom
2.35:1
Squeezed 2.35:1
18 Selecting the Aspect Ratio According to the Video Signal
Download from Www.Somanuals.com. All Manuals Search And Download.
Original image
Recommended setting and resultant images
Normal
1.78:1 (16:9)
1.33:1 (4:3)
1.33:1 (4:3) with side panels
V Stretch
2.35:1
When using an anamorphic lens
Squeeze
16:9
When using an anamorphic lens
Selecting the Aspect Ratio According to the Video Signal 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Original image
Recommended setting and resultant images
Stretch
Squeezed
Notes
• Selectable aspect modes vary depending on
• The aspect cannot be selected for an input
signal from a computer, or an input signal
Notes on switching the “Aspect”
setting
• Select the aspect mode taking into account
that changing the aspect ratio of the
original picture will provide a different
look from that of the original image.
• Note that if the unit is used for profit or for
public viewing, modifying the original
picture by switching the aspect may
constitute an infringement of the rights of
authors or producers, which are legally
protected.
20 Selecting the Aspect Ratio According to the Video Signal
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Picture Viewing Mode
You can select the picture viewing mode that
best suits the type of video source or room
conditions.
You can save and use different preset modes
for 2D/3D respectively.
CALIBRATED
PRESET buttons
Press one of the CALIBRATED PRESET
buttons.
Setting items
Description
CINEMA FILM 1
Picture quality suited to reproducing the highly dynamic and
clear images typical of master positive film.
CINEMA FILM 2
Picture quality suited to reproducing the rich tone and color
typical of a movie theater, based on the tones changed for FILM
1.
REF
TV
A picture quality setup suitable for when you want to reproduce
faithfully the original image quality, or for enjoying image
quality, without any adjustment.
Picture quality suited for watching TV programs, sports,
concerts, and other video images.
PHOTO
GAME
Ideal for projecting still images taken with a digital camera.
Picture quality suited to gaming, with well-modulated colors
and fast response.
BRT CINE
BRT TV
Picture quality suited for watching movies in a bright
environment, such as a living room.
Picture quality suited for watching TV programs, sports,
concerts, and other video images in a bright environment, such
as a living room.
USER
Adjusts the picture quality to suit your taste then saves the
setting. The factory default setting is the same as “REF.”
Selecting the Picture Viewing Mode 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
This section describes how to make various adjustments and settings using the menus.
Operation through
the Menus
The unit is equipped with an on-screen menu
for making various adjustments and settings.
If you select an item name followed by an
arrow (B), the next menu window with
setting items appears.
1 Press MENU.
3 Press M/m to select an item you want
to set or adjust and press , or
.
The menu window appears.
The setting items are displayed in a pop-
up menu, in a setting menu, in an
adjustment menu or in the next menu
window.
Pop-up menu
Setting items
2 Press M/m to select a menu item, and
press , or
.
The items that can be set or adjusted
with the selected menu appear. The item
presently selected is shown in white.
22 Operation through the Menus
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting menu
To reset the picture that has been
adjusted
Select “Reset” from the Picture
menu.
When the screen display appears, select
“Yes” using < and press
.
Adjustment menu
Next menu window
All of the following settings are reset to its
factory preset value:
“Reality Creation,” “Cinema Black Pro,”
“Motionflow,” “Contrast,” “Brightness,”
“Color,” “Hue,” “Color Temp.,”
“Sharpness,” and “Expert Setting” on the
Picture
menu
Setting items
To reset the items that have been
adjusted
Select an item in the menu screen, and
display the pop-up menu, the setting menu,
or the adjustment menu.
Press RESET on the remote control to reset
only the selected settings to its factory preset
value.
Note
The RESET button on the remote control is
available only when the adjustment menu or
the setting menu is selected.
4 Make the setting or adjustment of an
item.
When changing the adjustment
level
To increase the value, press M/,.
To decrease the value, press m/<.
Press
to store the setting and restore
the original menu screen.
When changing the setting
Press M/m to change the setting.
Press
to restore the original screen.
You can restore the original screen using
< depending on the selected item.
To clear the menu
Press MENU.
Operation through the Menus 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Menu
The Picture menu is used for adjusting the picture.
Note
These items may not be available, depending on the type of input signal. For details, see “Input
Item names in brackets represent those printed on the remote control.
Setting items
Description
Calib. Preset
[CALIBRATED
PRESET]
You can select the picture viewing mode that best suits the type of video
source or the environment.
You can save and use different preset modes for 2D/3D respectively.
Cinema Film 1: Picture quality suited to reproducing the highly
dynamic and clear images typical of master positive film.
Cinema Film 2: Picture quality suited to reproducing the rich tone and
color typical of a movie theater, based on the tones changed for Cinema
Film 1.
Reference: A picture quality setup suitable for when you want to
reproduce faithfully the original image quality, or for enjoying image
quality, without any adjustment.
TV: Picture quality suited for watching TV programs, sports, concerts,
and other video images.
Photo: Ideal for projecting still images taken with a digital camera.
Game: Picture quality suited to gaming, with well-modulated colors and
fast response.
Bright Cinema: Picture quality suited for watching movies in a bright
environment, such as a living room.
Bright TV: Picture quality suited for watching TV programs, sports,
concerts, and other video images in a bright environment, such as a
living room.
User: You can adjust the picture quality to suit your taste, and save the
setting. The factory default setting is the same as “Reference.”
Tip
Any adjustments to picture quality settings are saved for each input.
24 Picture Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting items
Description
Reset
Resets all currently selected Calib. Preset mode settings to their default
Tip
Reset does not affect settings saved for the Custom 1 to 5 items of
“Color Temp.”
Reality Creation
[REALITY
CREATION]
Adjusts the detail and noise processing of images. (Super-resolution
function)
On: Adjusts the settings of “Reality Creation.”
Database: Select “Normal” or “Mastered in 4K.”
“Mastered in 4K” provides image quality suitable for Blu-ray Disc™
“Mastered in 4K” releasing from Sony Pictures Home Entertainment.
Resolution: When you increase the setting value, the texture and detail
of the picture become sharper.
Noise Filtering: When you increase the setting value, the noise
(picture roughness) becomes less prominent.
Test: On/Off: Changes “On” and “Off” at a certain frequency to check
the effect of “Reality Creation.”
Tip
The display position of status during the test works together with the
Off: The “Reality Creation” function is not applied.
Cinema Black Pro
Advanced Iris
[ADVANCED
IRIS]
Dynamic Control: Adjusts the range of movement of the iris (aperture).
Full: Automatically optimizes the iris (aperture) and signal processing
according to the brightness level of the input source. This results in a
bright and high contrast image.
Limited: Provides a slower movement of the iris (aperture) and lower
brightness than “Full,” making the picture quality suitable for viewing
in a dark room.
Off: The “Dynamic Control” function is not applied.
Brightness: The higher the setting, the brighter the picture. The lower
the setting, the darker the picture.
Tip
After adjusting “Brightness,” set “Dynamic Control” according to the
brightness of the room and the picture itself.
Contrast Enhancer Corrects the level of bright and dark parts automatically to optimize
[CONTRAST
ENHANCER]
contrast according to a scene.
Increases image sharpness and makes image dynamic.
High/Middle/Low: You can adjust the contrast enhancer.
Off: The contrast enhancer function is not applied.
Lamp Control
Switches the lamp output.
High: Increases the brightness, and projects brighter images.
Low: Decreases the brightness, and enhances blacks by minimizing
brightness.
Tip
Setting “Low” reduces fan noise, while also reducing energy
consumption for longer lamp life.
Picture Menu 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting items
Description
Motionflow
[MOTIONFLOW]
Smooth High: Provides smoother picture movement; especially
effective for film-based content.
Smooth Low: Provides smoother picture movement for standard use.
Impulse: Reproduces original picture quality. Provides cinema-like
picture, which may flicker.
Combination: Reduces motion blur while maintaining brightness for
high-speed picture content.
True Cinema: Images, such as a movie created in 24 frames per second,
are reproduced at the original framerate.
Off: The “Motionflow” function is not applied.
Tips
• Select “Off” if the selected “Smooth High,” “Smooth Low,” “Impulse,”
“Combination,” or “True Cinema” results in a distorted picture.
• Depending on the picture content, you may not see the effect visually
even if you have changed the settings.
Contrast
[CONTRAST]
Adjusts the contrast.
Higher values increase the sharpness in images, while lower values
decrease the sharpness.
You can make adjustments by pressing the CONTRAST +/- on the
remote control.
Brightness
[BRIGHTNESS]
Adjusts the brightness of the picture.
The higher the setting, the brighter the picture. The lower the setting, the
darker the picture.
You can make adjustments by pressing the BRIGHTNESS +/- on the
remote control.
Color
Hue
Adjusts the color density.
The higher the setting, the greater the intensity. The lower the setting, the
lower the intensity.
Adjusts the color tone.
The higher the setting, the more greenish the picture becomes. The lower
the setting, the more reddish the picture becomes.
Color Temp.
[COLOR TEMP]
Adjusts the color temperature.
D93: Equivalent to 9,300 K color temperature normally used in TVs.
Gives white colors a blue tint.
D75: Equivalent to 7,500 K color temperature used as an ancillary
standard illuminant. Gives a neutral tint between “D93” and “D65.”
D65: Equivalent to 6,500 K color temperature used as a standard
illuminant. Gives white colors a red tint.
D55: Equivalent to 5,500 K color temperature used as an ancillary
standard illuminant. Gives white colors an even redder tint.
Custom 1 to 5: Enables you to adjust, set, and store your favorite color
temperature.
The factory default settings are as follows.
Custom 1: Same as “D93” color temperature setting.
Custom 2: Same as “D75” color temperature setting.
Custom 3: Same as “D65” color temperature setting.
Custom 4: Same as “D55” color temperature setting.
Custom 5: Setting that prioritizes brightness.
Sharpness
[SHARPNESS]
Sharpens the outline of the picture, or reduces the noise.
The higher the setting, the sharper the picture. The lower the setting, the
softer the picture, thus reducing the noise.
You can make adjustments by pressing the SHARPNESS +/- on the
remote control.
26 Picture Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting items
Description
Expert Setting
NR (Noise
Reduction)
Reduces the roughness or noise of the picture.
Auto: Detects the noise level to reduce the roughness or noise of the
picture automatically.
High/Middle/Low: Select a setting according to the roughness or noise
of the input signal source.
Off: The NR (noise reduction) function is not applied.
Tip
The noise level may not be detected accurately with “Auto” depending
on the input signal source. If the picture is unacceptable with “Auto,”
select a setting from among “High,” “Middle,” “Low” or “Off.”
MPEG NR
(MPEG Noise
Reduction)
Reduces block noise and mosquito noise, in particular in digital signals.
Auto: Detects the noise level to reduce the block noise and mosquito
noise of the picture automatically.
High/Middle/Low: Select a setting according to the block noise and
mosquito noise of the input signal source.
Off: The MPEG NR (MPEG noise reduction) function is not applied.
Tip
The noise level may not be detected accurately with “Auto” depending
on the input signal source. If the picture is unacceptable with “Auto,”
select a setting from among “High,” “Middle,” “Low” or “Off.”
Smooth Gradation Smooths the gradation of the flat parts of images.
High/Middle/Low: You can adjust the smooth gradation effect.
Off: The smooth gradation function is not applied.
Film Mode
According to the film source you have selected, make a setting for
playback.
Auto: Suitable for reproducing the original picture movement.
Normally, set this to “Auto.”
Off: Plays back the picture in progressive format without detecting
video signals automatically.
Gamma
Adjusts the response characteristics of the tone of the picture.
Select a favorite tone from 10 options.
1.8: Bright Produces a brighter picture overall.
Correction
[GAMMA
CORRECTION]
2.0
2.1
2.2
2.4
2.6: Dark
Produces a darker picture overall.
Gamma 7: Simulates the gamma curve of film.
Gamma 8: Increases the sharpness in images. Select this when you
watch in a bright environment, such as a living room.
Gamma 9: Produces a brighter picture than Gamma 8.
Gamma 10: Increases the sharpness in images. Select this when you
watch TV programs, etc., in a bright environment, such as a living room.
Off: The “Gamma Correction” function is not applied.
Picture Menu 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting items
Color Correction
Description
On: Adjusts Hue, Color or Brightness of the selected colors.
Repeat steps 1 and 2 described below to specify the target color.
1 Press M/m to select “Color Select,” then press </, to select the
color you want to adjust among “Red,” “Yellow,” “Green,” “Cyan,”
“Blue” and “Magenta.”
2 Press M/m to select “Hue,” “Saturation” or “Brightness,” then adjust
them to suit your taste using </, while watching the projected
picture.
Off: The “Color Correction” effect is not applied.
Clear White
x.v.Color
Emphasizes vivid whites.
High/Low: You can adjust the “Clear White” effect.
Off: The “Clear White” effect is not applied.
Set this item when connecting the unit with equipment that supports
x.v.Color and playing back an x.v.Color video signal.
On: You can play back an x.v.Color video signal.
Off: The “x.v.Color” function is not applied.
Tip
Setting x.v.Color to “On” disables gamma adjustment.
Color Space
Converts the color space.
[COLOR SPACE] BT.709: An ITU-R BT.709 color space, which is used for high-
definition television broadcast or Blu-ray Disc. The color space is
equivalent to sRGB.
Color Space 1: The color space suited for watching TV programs and
video images, such as sport, concerts, etc.
Color Space 2: The color space suited for watching TV programs, sport,
concerts, and other video images in a bright environment, such as a
living room.
Color Space 3: The color space suited for watching movies in a bright
environment, such as a living room.
Custom: You can adjust the color space setting.
28 Picture Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Picture Menu
You can adjust the gaps in color that have occurred after a long period of use.
Notes
• Auto Calibration results in relatively coarse calibration. No warranty is given for the color settings
to be the same as the factory default values.
• While performing “Pre Check” or “Adjust,” the colors are projected automatically. This is not a
malfunction.
• Do not turn off the power or operate the remote control or control panel during “Pre Check” or
“Adjust”, as the process may be canceled.
Tips
• dE is an indicator of changing color. The smaller the value of dE, the fewer the changes caused by
the color.
• Perform the calibration after the power has been on for more than 30 minutes.
• It takes a few minutes for “Pre Check” or “Adjust” to complete.
• When “Pre Check” or “Adjust” starts, the screen position may shift, as the lens returns to its factory
default position. After completion, the screen returns to its previous position automatically.
• If the environment changes, such as the brightness of the room, while performing “Pre Check” or
“Adjust”, measurement may be affected.
• If the “Pre Check” or “Adjust” function fails, try it once again.
Setting items
Description
Auto Calibration
Pre Check: Checks the color difference against the factory default
settings, before calibration starts.
Adjust: Performs Auto Calibration.
Before/After: Toggles the factory default setting and the setting after the
calibration at a certain frequency. You can check the effect of the
calibration by monitoring the actual image.
Reset: Resets the calibration results, and returns to the factory default
settings.
Advanced Picture Menu 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Menu
You can set the picture size, aspect mode, etc.
Note
These items may not be available, depending on the type of input signal. For details, see “Input
Item names in brackets represent those printed on the remote control.
Setting items
Description
Picture Position
[POSITION]
You can store up to five combinations of lens settings and aspect ratio.
After setting the lens and aspect, select from “1.85:1,” “2.35:1,”
“Custom 1,” “Custom 2” or “Custom 3” depending on the subtended
screen angle, and after confirming, continue by selecting “Save,”
“Delete,” or “Select.”
Save: Stores the current lens settings (focus, window size, window
position) in the selected position. If a setting is already stored in that
position, it is overwritten.
Delete: Deletes the stored setting. After the setting is deleted, “1.85:1,”
“2.35:1,” “Custom 1,” “Custom 2,” or “Custom 3” in the display change
to “---.”
Select: Recalls the settings of the selected position.
Tip
The optimal aspect ratio is preset for each picture position. The aspect
ratio can be changed and saved for each picture position.
Notes
• After you have selected and confirmed the lens position, the lens starts
to move. Do not touch the lens and the area around the lens, otherwise
it may cause injury or a malfunction.
• If you press any button on the unit while the lens is moving, the lens
stops. In this case, select the lens position again or adjust the lens
manually.
• When you use a 2.35:1 or a 16:9 subtended screen angle with the
Picture Position function, make sure that the installation position is
• The Picture Position function is not guaranteed to reproduce the lens
settings precisely.
30 Screen Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting items
Description
Aspect
[ASPECT]
You can set the aspect ratio of the picture to be displayed for the current
You can set the function only when a video signal other than a resolution
of 4096 × 2160 pixels is input.
1.85:1 Zoom: A 1.85:1 aspect ratio picture is displayed in its original
aspect ratio, enlarged so that black bands do not appear at the top and
bottom of the screen.
2.35:1 Zoom: A 2.35:1 aspect ratio picture is displayed in its original
aspect ratio, enlarged so that black bands at the top and bottom of the
screen are as small as possible.
When you select “2.35:1 Zoom” from “Trigger Select 1/2” on the
Installation
menu, a 12 V signal is output from the TRIGGER 1 or
Normal: Input video is displayed in its original aspect ratio, enlarged to
fill the screen. This mode is suitable for viewing 1.78:1 (16:9) and 1.33:1
(4:3) video.
V Stretch: This is the most suitable mode for using a 2.35:1 screen to
view 2.35:1 video with a commercially available anamorphic lens.
When you select “V Stretch” from “Trigger Select 1/2” on the
Installation
menu, a 12 V signal is output from the TRIGGER 1 or
Squeeze: With this setting, 1.78:1 (16:9) and 1.33:1 (4:3) video will be
displayed in their correct aspect ratios when you use a commercially
available anamorphic lens.
Stretch: Displays video that has been squeezed to 1.33:1 (4:3) as 1.78:1
(16:9) aspect ratio.
Tips
• When you select “V Stretch” or “Squeeze,” select the anamorphic lens
type from “Anamorphic Lens” in the Installation
menu.
• The aspect cannot be selected for an input signal from a computer, or
Screen Menu 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
The Setup menu is used to change the factory preset settings, etc.
Setting items
Description
Status
Sets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for certain menus,
message when turning off the power, and warning messages.
Language
Selects the language used in the menu and on-screen displays. Available
languages are: English, Dutch, French, Italian, German, Spanish,
Portuguese, Russian, Swedish, Norwegian, Japanese, Chinese
(Simplified Chinese), Chinese (Traditional Chinese), Korean, Thai, and
Arabic.
Menu Position
Cooling Setting
You can change the position to display the menu on the screen.
Bottom Left: Displays the menu on the bottom left area of the screen.
Center: Displays the menu on the center of the screen.
Sets the unit to operate at the prevailing atmospheric pressure.
High: Use this setting when using the unit at an altitude of 1,500 m
(approx. 4,900 ft) or higher.
Standard: Use this setting when using the unit at normal altitudes.
Tip
When this item is set to “High,” the fan noise becomes slightly louder
since the fan speed increases.
Remote Start
Sets the Remote Start settings.
On: You can turn on the power from a PC or a terminal which is
connected to a network.
Off: Turns off the Remote Start function.
Tips
• To use the function, the unit should be connected to the network in
• To turn on the power with the Remote Start function, a special
command should be sent from a PC or a terminal. For details, consult
with qualified Sony personnel.
Note
When the Remote Start is set to “On,” the standby power requirement
will increase.
32 Setup Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting items
Description
Power Saving
Sets the power saving mode.
Standby: If no signal is input for 10 minutes, power is turned off
automatically and the projector goes into standby mode.
Off: Disables the power saving function.
Lamp Setting
When replacing the lamps, set the desired lamp setting
Setup Menu 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Menu
The Function menu is used for changing the settings of the various functions of the unit.
Setting items
Description
3D Settings
You can change the settings of the 3D function.
2D-3D Display
Sel.
For Switching the video images to “2D” or “3D.”
Auto: Displays 3D video images when HDMI signals with 3D
information* are input. Displays 2D video images when other signals
are input.
3D: Displays 3D video images according to the 3D system selected in
“3D Format.” However, when HDMI signals with 3D information are
input to the unit, displays 3D video images according to the 3D system
of those HDMI signals.
2D: Displays 2D video images.
* The 3D information is additional information to discriminate 3D.
Some HDMI signals have additional information to discriminate 3D
and some HDMI signals have none.
3D Format: Set the 3D system when the input HDMI signals do not
include 3D information.
Simulated 3D: Converts 2D video images to 3D video images. The
setting can be made only for input the HD signals.
The simulated 3D feature may have limited effect, depending on the
video source.
There are differences in perception of 3D video images among
individuals.
Side-by-Side: Select this to display 3D images as two similar images,
side-by-side.
Over-Under: Select this to display 3D images as two similar images,
one above the other.
Tips
• “2D-3D Display Sel.” cannot be set to “3D” for some video sources.
• The simulated 3D feature may have limited effect, depending on the
screen size (100 to 120 inches recommended) and the video source.
• The menu display has a ghost while a 3D video image is displayed and
is best viewed with the 3D glasses.
3D Brightness
For adjusting the brightness of the picture when watching 3D video
images.
You can select the brightness “High” or “Standard.”
34 Function Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting items
3D Depth Adjust
Description
For adjusting the depth of the 3D video images on the screen. The
setting can be made only when a 3D Format other than “Simulated 3D”
is selected.
Depth
Front
Normal
Depth
We recommend that “3D Depth Adjust” be set to “0.” The 3D video
images may be difficult to perceive, depending on the setting of “3D
Depth Adjust.”
Simulated 3D
Effect
For adjusting the 3D effect when 2D content is converted to 3D video
images. You can select the effect from among “High,” “Middle,” and
“Low.”
Tip
There are differences in perception of 3D video images converted by the
simulated 3D function among individuals.
Dynamic Range
Sets the video input level for HDMI 1 and HDMI 2 connectors.
Auto: Sets the video input level automatically.
Limited: The video input level is set for signals of 16-235.
Full: The video input level is set for signals of 0-255.
Note
If the video output setting of the connected HDMI device is not set
correctly, light and dark parts of the video may appear too light or too
dark.
Test Pattern
Displays a test pattern according to the setting.
On: A test pattern appears on the screen to be used when adjusting the
lens with “Lens Focus,” “Lens Zoom,” and “Lens Shift.”
Off: A test pattern does not appear.
Tip
While the test pattern is displayed, it is only displayed in green to allow
you to adjust the focus easily.
Settings Lock
Off: Cancels the Settings Lock.
Level A: Group 1 items (below) are not displayed on the menu, and are
not available.
Level B: Group 1 and Group 2 items (below) are not displayed on the
menus, and are not available.
Function Menu 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Items Locked by Settings Lock
Group 1
Group 2
Picture menu
Setup menu
Reset
Status
Language
Menu Position
Cooling Setting
Remote Start
Lamp Setting
Reality Creation
Advanced Iris
Contrast Enhancer
Lamp Control
Motionflow
Contrast
Brightness
Color
Hue
Function menu
Dynamic Range
Test Pattern
Color Temp.
Sharpness
NR
MPEG NR
Smooth Gradation
Film Mode
Gamma Correction
Color Correction
Clear White
x.v.Color
Installation menu
Image Flip
Lens Control
Anamorphic Lens
Trigger Select
IR Receiver
Blanking
Panel Alignment
Network Setting
Color Space
Advanced Picture menu
Auto Calibration
36 Function Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Menu
The Installation menu is used for changing the installation settings.
Setting items
Description
Image Flip
Flips the picture on the screen horizontally and/or vertically.
HV: Flips the picture horizontally and vertically.
H: Flips the picture horizontally.
V: Flips the picture vertically.
Off: The picture does not flip.
Use this item for installation for the backside projection or ceiling
installation.
Lens Control
Avoids any operation of the lens such as “Lens Focus,” “Lens Zoom,”
and “Lens Shift,” by mistake.
On: Enables adjustment of the lens.
Off: Prevents any adjustment of the lens.
Anamorphic Lens
Select a setting to match the anamorphic lens conversion ratio.
1.24x: Select this when you use an anamorphic lens with a horizontal
rate of 1.24×.
1.32x: Select this when you use an anamorphic lens with a horizontal
rate of 1.32×.
Trigger Select
Switches the output function of the TRIGGER 1/TRIGGER 2 connector.
Off: Turns off the TRIGGER connector function.
Power: Outputs 12 V signals from the TRIGGER 1/TRIGGER 2
connectors when the unit is on. The TRIGGER 1/TRIGGER 2
connectors do not output any signals when the unit is in standby.
V Stretch: Works with the “Aspect” setting’s “V Stretch”
(page 31) and outputs a 12 V signal from the TRIGGER 1 or TRIGGER
2 connector.
2.35:1 Zoom: Works with the “Aspect” setting’s “2.35:1 Zoom”
(page 31) and outputs a 12 V signal from the TRIGGER 1 or TRIGGER
2 connector.
IR Receiver
Selects the remote control detectors (IR Receiver) on the front and rear
of the unit.
Front & Rear: Activates both the front and rear detectors.
Front: Activates the front detector only.
Rear: Activates the rear detector only.
Installation Menu 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting items
Description
Blanking
This feature allows you to adjust the displayable region within the four
directions of the screen.
Select the edge to adjust by highlighting Left, Right, Top, or Bottom
using the M/m buttons.
Adjust the amount of blanking using the </, buttons.
Tip
Depending on the aspect ratio setting, right/left blanking may not be
available.
Panel Alignment
This feature allows you to adjust the gaps in the color of characters or
the picture on the screen.
Adjust: Adjusts the gaps in the colors selecting “Adjust Color” or
“Adjust Item.”
Adjust Item: Selects how to make adjustments from below.
Shift: Shifts the whole picture and makes adjustments.
Zone: Selects the desired range and makes adjustments.
Adjust Color: Assigns the desired color to adjust the gaps in color.
Select “R” (Red) or “B” (Blue) to make adjustments based on “G”
(Green).
Pattern Color: Select “R/G” (Red and Green) or “R/G/B” (White, all
colors) when “Adjust Color” is “R” (Red). Select “B/G” (Blue and
Green) or “R/G/B” (White, all colors) when the “Adjust Color” is “B”
(Blue).
Adjust: The shift adjustment and zone adjustment of the color selected
in “Adjust Color” can be made with </,, M/m buttons.
When “Shift” is selected: Assign the settings of the horizontal
direction (H) with </, buttons and the vertical direction (V) with
M/m buttons on the shift adjustment screen.
38 Installation Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting items
Description
When “Zone” is selected: Select the position to adjust with </,
buttons for the horizontal position (H position) and M/m buttons for
the vertical position (V position), then press
.
Set the amount to adjust with </, buttons for the horizontal
direction (H direction) and with M/m buttons for the vertical
direction (V direction). You can select the position to adjust again by
pressing
.
Reset: Returns to the factory settings.
Preset: The optimized data has been preset.
Note
Depending on the adjustments made above, colors may become uneven
or the resolution may change.
Network Setting
Perform internet protocol settings.
IP Address Setup Select the IP address setting method.
Auto (DHCP): The IP address is assigned automatically from the DHCP
server such as a router.
Manual: Specify the IP address manually.
When “Manual” is selected for “IP Address Setup,” select the item with
the </, buttons and input the value with the M/m buttons. When all
items are entered, select “Apply,” and then press the
entered settings will be registered.
button. The
IP Address
Set the unit’s IP address.
Set the unit’s subnet mask.
Set the unit’s default gateway.
Subnet Mask
Default Gateway
MAC Address
Display the unit’s MAC address. This cannot be changed.
Installation Menu 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Information Menu
The Information menu displays the model name, serial number, input signal type, software
version and the cumulated hours of usage of the lamp.
Model name
Serial No.
Signal type
Software version
Items
Description
Model Name
Serial No.
Signal type
Displays the model name
Displays the serial number.
Displays the type of the input signal. When input signals with 3D
information are input, the type of input signals and the 3D format are
displayed.
Software Version
Lamp Timer
Displays the software version.
Indicates how long the lamp has been turned on (total usage).
Note
You cannot adjust or change the displays listed above.
About the Preset Memory
This unit has default image data to adjust preset data for input signals appropriately according
is input, the unit automatically detects the signal type and recalls the data for the signal from
the preset memory to adjust it to an optimum picture. The signal type is displayed in the
Information
menu.
Note
Depending on the computer input signal, parts of screen may be hidden or displayed incorrectly.
40 Information Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Network Features
Connecting the unit
to the network
1 Connect the LAN cable.
LAN cable
(straight type)
(not supplied)
LAN
Connector
Hub, router, etc.
2 Set the network settings for the unit
using “Network Setting” on the
Installation
Supported network monitoring and
control protocols
• SDAP (Advertisement)
• SDCP (PJ Talk)
• DDDP (AMX)
Note
The network functions above are constantly
enabled.
Connecting the unit to the network 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Handling
Troubleshooting
If the unit appears to be operating erratically, try to diagnose and correct the problem using the
following instructions. If the problem persists, consult with qualified Sony personnel.
Power
Symptom
Cause and Remedy
Page
The power is not turned
on.
The power may not turn on if you turn the power off with ?/
1 (ON/STANDBY) button and turn it on again in a short
time. After about 1 minute, turn the power on.
–
Close the lamp cover securely, then tighten the screws
securely.
Check warning indicators.
The power is suddenly
turned off.
Check that “Power Saving” in the Setup
“Standby.”
menu is set to
Set “Power Saving” to “Off.”
Picture
Symptom
Cause and Remedy
Page
No picture.
Check that the connecting cable is connected to the external
equipment properly.
Depending on the external equipment, the unit may not
function correctly via the HDMI 1 connector. In this case,
use the HDMI 2 connector, then select the input.
Select the input source correctly using the INPUT button.
–
Check that the computer signal is set for output to an
external monitor.
If the notebook computer, etc., signal is output to its display
and an external monitor, the external monitor’s image may
not be displayed correctly. Set your computer to output the
signal to only an external monitor.
The picture has ghosts.
Video images are displayed in 3D. Watch the 3D video
images using the 3D glasses, and set “2D-3D Display Sel.”
to “3D.”
To convert 3D video images to 2D video images, set “2D-
3D Display Sel.” to “2D.”
Bright or dark area of the This symptom may occur when signal level other than those
video appears too bright of HDMI standard is input. Switch the output level of the
or too dark.
connected equipment, or switch the Dynamic Range on the
Function menu of the unit.
The picture is too dark.
The picture is not clear.
Adjust “Contrast” or “Brightness” on the Picture
properly.
menu
Adjust the focus.
–
Condensation has accumulated on the lens. Leave the unit
for about 2 hours with the power on.
42 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause and Remedy
Page
The color of characters or Select the desired color registration in “Panel Alignment” of
the picture is not
appropriate.
the Installation
menu.
Image is left on the
When high contrast non-moving images are displayed for a
–
screen. (image retention) long period of time, there may be some image retention on
the screen. This is only a temporary condition. Turning off
the power for a while will eliminate the retained image.
On-screen display
Symptom
Cause and Remedy
Page
On-screen display does
not appear.
Set “Status” on the Setup
menu to “On.”
Check if the ON/STANDBY indicator should light in green.
When the ON/STANDBY indicator blinks in green, the unit
is starting up. Wait until it stops blinking and remains lit in
green.
The model name does not The display mode of the unit may be set at the time of
–
disappear from the
screen.
purchase. Consult with your local dealer or qualified Sony
personnel.
Remote control
Symptom
Cause and Remedy
Page
The remote control does Batteries could be weak. Replace them with new batteries.
–
–
–
not work.
Insert the batteries with the correct polarities.
If there is a fluorescent lamp near the remote control
detector, the unit may work improperly or inadvertently.
Confirm the position of the remote control detector on the
unit.
Set “IR Receiver” to “Front & Rear” on the Installation
menu.
Troubleshooting 43
Download from Www.Somanuals.com. All Manuals Search And Download.
3D video images
Symptom
Cause and Remedy
Page
The video image does not Check if the 3D glasses are turned on.
seem like 3D video
images.
Make sure that the battery in the 3D glasses could be weak
or is sufficiently charged.
–
Set “2D-3D Display Sel.” to “Auto” or “3D.”
Check if the input signals are compatible 3D signals.
–
The 3D signals may not be input depending on the
specifications of the connected AV selector/AV amplifier/
external equipment. If the 3D signal is not input, confirm
the specifications and/or settings of the AV selector/AV
amplifier/external equipment.
When the viewing position is too far from the unit, the 3D
glasses may not be able to display the images properly.
The screen size is not appropriate. Set the zooming
magnification to low or watch the image from farther away
from the screen.
For details, see “Precautions for use” of “Using the 3D
Glasses.”
Others
Symptom
Cause and Remedy
Page
The fan is noisy.
Check the setting of “Cooling Setting” on the Setup
menu.
Make sure that the room temperature is not too high.
–
–
Check the installation requirements of the unit.
Fan speed increases to maintain the product reliability of the
projector’s components in a room, where the temperature is
higher than normal. The fan noise becomes slightly louder.
The approximate normal temperature is 25°C (77°F).
The lens shift cannot be The lens shift cannot be adjusted over the range of
adjusted.
movement. Adjust the lens shift within the range of
movement.
44 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Indicators
The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with
your projector.
ON/STANDBY
WARNING
indicator
indicator
Flashing/Lighting indicators
The number of
flashes
Cause and Remedy
Twice
Close the lamp cover securely, then tighten
Three times
The temperature of lamp is unusually high.
Turn off the power and wait for the lamp to
cool, then turn on the power again.
If the symptom persists, the lamp may be at
the end of its service life. In this case,
(Flashes in red)
Twice
The internal temperature is unusually high.
Check to ensure that if nothing is blocking
the ventilation holes or whether or not the
unit is being used at high altitudes.
Three times
The fan is broken. Consult with qualified
Sony personnel.
(Flashes in red)
Both indicators flash
(Flashes in red)
Note
When a warning indicator other than the above starts flashing, and the symptom persists even after
carrying out the above methods, consult with qualified Sony personnel.
Warning Indicators 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Message Lists
Warning messages
Symptom
Cause and Remedy
Page
–
High temp.! Lamp off in Turn off the power.
1 min.
Check to ensure that nothing is blocking the ventilation
holes.
Frequency is out of
range!
Frequency is out of range. Input a signal that is within the
acceptable frequency range of the unit.
Please replace the Lamp. It is time to replace the lamp. Replace the lamp.
If this message appears again after you replace the lamp, the
lamp replacement process is not complete. Check the lamp
replacement process.
Note
To clear this message, press any button either on the remote
control or the control panel of the unit once.
Projector temperature is Check to ensure that nothing is blocking the ventilation
high. Cooling Setting
should be “High” if
projector is being used at
high altitude.
holes.
When using the unit at high altitude, set “Cooling Setting”
to “High.”
Note
When temperature inside the unit remains high, “Cooling
Setting” is switched to “High” in 1 minute, then the fan
speed increases.
Power Saving Mode is
set. Projector will
automatically enter
Standby Mode in 1
minute.
“Power Saving” is set to “Standby.”
Note
If no signal is input, the power turns off after 1 minute, and
the projector goes into standby mode.
Caution messages
Symptom
Cause and Remedy
Page
No signal is input in the selected input. Check connections.
x
Not applicable!
Press the appropriate button.
The operation to be activated by the button is currently
prohibited.
–
Settings Lock enabled.
“Settings Lock” is set to “Level A” or “Level B.”
46 Message Lists
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Updating the
Software
About the x.v.Color
• “x.v.Color” is a promotion name given to
the products that have the capability to
realize a wide color space based on the
xvYCC specifications and is a trademark
of Sony Corporation.
• xvYCC is an international standard of the
technical specifications of the extended-
gamut color space for video signals. The
color gamut of xvYCC is wider than the
one of sRGB that is used with the current
television system.
You can download files to update the
software of the unit. Copy the downloaded
files to your USB memory, insert the USB
memory to the USB terminal of the unit,
then perform the update.
To use the features updated, insert a USB
memory device into a PC connected to the
internet.
Download the update files from the
following Sony website:
system.pl
The website also explains how to install the
update.
About the simulated
3D feature
• Use the simulated 3D function taking into
account that the picture will provide a
different look from the original images,
because this function converts the video
images.
• Note that if the unit is used for profit or for
public viewing, displaying 2D video
images as 3D video images by converting
to the simulated 3D may constitute an
infringement of the rights of authors or
producers, which are legally protected.
Updating the Software / About the x.v.Color / About the simulated 3D feature 47
Download from Www.Somanuals.com. All Manuals Search And Download.
2 When setting the unit on a flat surface
such as a desk etc., put a cloth to
prevent the surface from being
Replacing the Lamp
scratched. Place the unit on the cloth.
The lamp used for the light source has a
certain lifespan. When the lamp dims, the
color balance of the picture becomes
strange, or “Please replace the Lamp.”
appears on the screen, the lamp may be
exhausted. Replace the lamp with a new one
(not supplied) without delay.
Note
Be sure that the unit is placed on a stable
surface.
3 While pressing the
part indicated
in the lamp cover illustration, slide 1
and then open 2 the lamp cover.
Tools you need to get started:
• Projector Lamp LMP-H260 (Optional)
• Standard Phillips screwdriver
• Cloth (for scratch protection)
Caution
• The lamp remains hot after the unit is
turned off with the ?/1 (ON/STANDBY)
button. If you touch the lamp, you may
burn your fingers. When you replace the
lamp, wait for at least 1 hour for the lamp
to cool.
• Do not touch the surface of the lamp. If
you touch it, wipe off the fingerprints with
a soft cloth.
4 Loosen the lamp door (inner cover)
screw with a Phillips screwdriver, and
then open the lamp door.
• Pay special attention to replacing the lamp
when the unit is installed on the ceiling.
• When replacing the lamp of a unit which is
on the ceiling, do not stand directly under
the lamp cover. When removing the lamp
door (inner cover), avoid twisting it. If the
lamp explodes, fragments may cause
injury.
• When removing the lamp unit, make sure
it remains horizontal, then pull straight up.
Do not tilt the lamp unit. If you pull out the
lamp unit while tilted and if the lamp
breaks, the pieces may scatter, causing
injury.
Notes
• Be sure to use an LMP-H260 Projector Lamp
for replacement. If you use lamps other than
the LMP-H260, the unit may malfunction.
• Be sure to turn off the unit and unplug the
power cord before replacing the lamp, then
check the ON/STANDBY indicator has
already been turned off.
1 Turn off the unit and unplug the AC
power cord.
48 Replacing the Lamp
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Loosen the 3 screws on the lamp with
the Phillips screwdriver. Hold up the
handle, then pull the lamp straight out.
7 Close the lamp door (inner cover), and
then tighten the screw.
8 Close the lamp cover.
Handle
Notes
• Do not loosen other screws except the 3
specified screws.
• Hold the lamp by the handle to remove
and attach it.
6 Push in the new lamp by the handle
securely until it reaches the end, and
then tighten the 3 screws.
9 Wipe dust off the ventilation holes
(intake) with a soft cloth.
Ventilation holes
(intake)
Note
Be careful not to touch the optical block
inside the unit.
Replacing the Lamp 49
Download from Www.Somanuals.com. All Manuals Search And Download.
10Turn on the unit, then select the lamp
setting item on the Setup
menu.
The menu screen below will be
appeared.
Tip
If “Settings Lock” is set to “Level B,” set to
“Off” once.
Note
The lamp contains mercury. The disposal
rules for used fluorescent tubes depend on
where you live. Follow the waste disposal
policy in your area.
11Select “Yes.”
Disposal of the used lamp
For the customers in the USA
Lamp in this product contains mercury.
Disposal of these materials may be
regulated due to environmental
considerations. For disposal or
recycling information, please contact
your local authorities or the
Caution
Do not put your hands into the lamp
replacement slot, and do not allow any liquid
or other objects into the slot to avoid
electrical shock or fire.
Notes
Telecommunications Industry
Association (www.eiae.org).
• The unit will not turn on unless the lamp is
securely installed in place.
• The unit will not turn on unless the lamp
cover are securely closed.
• To clear a message displayed on the screen,
press any button either on the remote control
or the control panel of the unit once.
Mettre à disposition de la lampe
usagée
Pour les clients aux États-Unis
La lampe dans ce produit contient du
mercure. La disposition de ces
matériaux peut être réglementée suite à
des considérations environnementales.
Pour obtenir des informations de
disposition ou de recyclage, veuillez
communiquer avec vos autorités locales
ou la Telecommunications Industry
Association (www.eiae.org).
Note on replacing the lamp when
broken, in the case of a ceiling
installation
If the lamp breaks, broken lamp pieces may
scatter and cause injury.
When the unit is on the ceiling, remove the
lamp door (inner cover) by sliding it
horizontally slowly after raising it with 30
degree opened. Avoid twisting the lamp door
(inner cover).
50 Replacing the Lamp
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning
Cleaning the cabinet
• To remove dust from the cabinet, wipe
gently with a soft cloth. If dust is
persistent, wipe with a soft cloth slightly
moistened with a diluted mild detergent
solution.
• Never use any type of abrasive pad,
alkaline/acid cleaner, scouring powder, or
volatile solvent, such as alcohol, benzene,
thinner or insecticide.
• Clean the unit with a cleaning cloth.
Wiping with a dirty cloth may scratch the
unit.
• Using such materials or maintaining
prolonged contact with rubber or vinyl
materials may result in damage to the
screen surface and cabinet material.
Cleaning 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Item
Description
Display system
SXRD panel, projection system
0.74-inch (18.8 mm) SXRD
Display device
Projection lens
Size of effective
display area
Number of pixels 26,542,080 pixels (8,847,360 pixels × 3)
2.06 times zoom lens (motorized)
f = 21.7 mm to 44.7 mm
F3.0 to F4.0
Light source
Screen size
Ultra High Pressure Lamp 265 W type
60 inches to 300 inches (1,524 mm to 7,620 mm)
(measured diagonally)
Accepted digital signals
480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/
50i, 1080/60p, 1080/50p, 1080/24p, 3840 × 2160/24p,
3840 × 2160/25p, 3840 × 2160/30p, 3840 × 2160/50p,
3840 × 2160/60p, 4096 × 2160/24p, 4096 × 2160/25p,
4096 × 2160/30p, 4096 × 2160/50p, 4096 × 2160/60p
HDMI (2 inputs), HDCP compliant
RGB
Y PB/CB PR/CR
Other inputs/
outputs
TRIGGER
(2 connectors)
Minijack , DC 12 V Max. 100 mA
REMOTE
LAN
RS-232C: D-sub 9-pin (female)
RJ45, 10BASE-T/100BASE-TX
Minijack
IR IN
USB
DC 5 V, Max. 500 mA
1
11
Outside dimensions (w/h/d)
495.6 mm × 195.3 mm × 463.6 mm (19 / × 7
/
×
2
16
1
18 / inches) (without protrusions)
4
Mass
Approx. 14 kg (31 lb)
Power requirements
Power consumption
Standby power requirements
AC 100 V to 240 V, 4.0 A to 1.7 A, 50/60 Hz
375 W
0.5 W (when “Remote Start” is set to “Off”)
7 W (when “Remote Start” is set to “On”)
Operating temperature
Operating humidity
Storage temperature
Storage humidity
5°C to 35°C (41°F to 95°F)
35% to 85% (no condensation)
–20°C to +60°C (–4°F to +140°F)
10% to 90%
Supplied accessories
See “Checking the Supplied Accessories” in the
supplied Quick Reference Manual.
Optional accessories
Projector Lamp: LMP-H260 (for replacement)
Projector Suspension Support: PSS-H10
Active 3D Glasses: TDG-BT500A
52 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• The values for mass and dimensions are approximate.
• Not all optional accessories are available in all countries and area. Please check with your local
Sony Authorized Dealer.
• Information on accessories in this manual is current as of October 2013.
Design and specifications of this unit and its optional accessories are subject to change without
notice.
Preset Signals
The following table shows the signals and video formats which you can project using this unit.
When a signal other than the preset signal shown below is input, the picture may not be
displayed properly.
Preset
Preset signal (resolution)
fH (kHz)
fV (Hz)
60.000
Sync
memory no.
5
480/60p
576/50p
480/60p
(Progressive NTSC)
(720 × 480p)
31.470
–
–
6
576/50p
31.250
50.000
(Progressive PAL)
(720 × 576p)
7
1080/60i
1080/50i
720/60p
720/50p
1080/60p
1080/50p
1080/24p
1080/60i
(1920 × 1080i)
33.750
28.130
45.000
37.500
67.500
56.260
26.973
90.000
75.000
53.946
60.000
50.000
60.000
50.000
60.000
50.000
23.976
60.000
50.000
23.976
–
–
–
–
–
–
–
–
–
–
8
1080/50i
(1920 × 1080i)
10
11
12
13
14
18
19
20
720/60p
(1280 × 720p)
720/50p
(1280 × 720p)
1080/60p
(1920 × 1080p)
1080/50p
(1920 × 1080p)
1080/24p
(1920 × 1080p)
720/60p
(Frame packing)
720/60p
(1280 × 720p)
720/50p
(Frame packing)
720/50p
(1280 × 720p)
1080/24p
1080/24p
(Frame packing)
(1920 × 1080p)
26
32
37
45
47
50
55
71
640 × 480
VESA 60
VESA 60
VESA 60
VESA 60
VESA 60
SXGA+
31.469
37.879
48.363
60.000
63.974
65.317
47.776
67.500
59.940
60.317
60.004
60.000
60.013
59.978
59.87
H-NEG, V-NEG
H-POS, V-POS
H-NEG, V-NEG
H-POS, V-POS
H-POS, V-POS
H-NEG, V-POS
H-NEG, V-POS
–
800 × 600
1024 × 768
1280 × 960
1280 × 1024
1400 × 1050
1280 × 768
1280 × 768/60
1920 × 1080/60i
(Frame packing)
1080/60i
(1920 × 1080i)
60.000
Specifications 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset
memory no.
Preset signal (resolution)
fH (kHz)
fV (Hz)
50.000
Sync
72
74
75
76
77
78
79
93
94
95
96
1920 × 1080/50i
1080/50i
56.250
–
–
–
–
–
–
–
–
–
–
–
(Frame packing)
(1920 × 1080i)
3840 × 2160/60p*
3840×2160/60p
(3840 × 2160)
135.000
112.500
135.000
112.500
67.500
56.250
53.946
56.25
60.000
50.000
60.000
50.000
30.000
25.000
23.976
25
3840 × 2160/50p*
4096 × 2160/60p*
4096 × 2160/50p*
4096 × 2160/30p
4096 × 2160/25p
3840 × 2160/24p
3840 × 2160/25p
3840 × 2160/30p
4096 × 2160/24p
3840 × 2160/50p
(3840 × 2160)
4096 × 2160/60p
(4096 × 2160)
4096 × 2160/50p
(4096 × 2160)
4096 × 2160/30p
(4096 × 2160)
4096 × 2160/25p
(4096 × 2160)
3840 × 2160/24p
(3840 × 2160)
3840 × 2160/25p
(3840 × 2160)
3840 × 2160/30p
(3840 × 2160)
67.4325
54
29.97
24
4096×2160/24p
(4096 × 2160)
* Available for YUV420 format signal only.
Preset memory numbers for each input signal
Digital signal
Signal
Preset memory number
Component signal (HDMI 1, 2 connectors)
5 to 8, 10 to 14, 18 to 20, 71, 72, 74 to 79, 93 to
96
Video GBR signal (HDMI 1, 2 connectors)
Computer signal (HDMI 1, 2 connectors)
5 to 8, 10 to 14, 18 to 20, 71, 72, 78, 79, 93 to
96
10 to 13*, 26, 32, 37, 45, 47, 50, 55
* Some digital signals input from computers may be displayed as preset memory number of
Component or Video GBR signal.
54 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Input Signals and Adjustable/Setting Items
The items in the menus available to adjust differ depending on the input signal. The following
tables indicate them. The items that cannot be adjusted/set are not displayed in the menu.
Picture menu
Input signal
Item
Component signal
Video GBR signal
Computer signal
Reality Creation
Advanced Iris
z
z
–
z
–
z
z
Contrast Enhancer
z (excluding preset
z (excluding preset
memory numbers 74 memory numbers 78,
to 79 and 93 to 96)
79 and 93 to 96)
Lamp Control
Motionflow
z
z
z
z (excluding preset
memory number 19) memory number 19)
z (excluding preset
–
Contrast
Brightness
Color
z
z
z
z
–
z
z
z
z
Hue
z
z
–
Color Temp.
Sharpness
NR
z
z
z
z
z
–
z (excluding preset
memory numbers 18 memory numbers 18
to 20, 71, 72, 74 to to 20, 71, 72, 78, 79,
z (excluding preset
–
79, and 93 to 96)
and 93 to 96)
MPEG NR
z (excluding preset
memory numbers 18 memory numbers 18
to 20, 71, 72, 74 to to 20, 71, 72, 78, 79,
z (excluding preset
–
–
–
79, and 93 to 96)
and 93 to 96)
Smooth Gradation
Film Mode
z (excluding preset
memory numbers 18 memory numbers 18
to 20, 71, 72, 74 to to 20, 71, 72, 78, 79,
z (excluding preset
79, and 93 to 96)
and 93 to 96)
z (excluding preset
z (excluding preset
memory numbers 5, memory numbers 5,
6, 10 to 14, 18 to 20, 6, 10 to 14, 18 to 20,
74 to 79, and 93 to 78, 79, and 93 to 96)
96)
Gamma Correction
Color Correction
Clear White
z
z
z
z
z
z
z
z
–
z
z
z
–
x.v.Color
Color Space
z
z
z: Adjustable/can be set
–: Not adjustable/cannot be set
Specifications 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen menu
Input signal
Item
Component signal Video GBR signal
Computer signal
1
Aspect*
z (excluding preset
memory numbers 76 memory numbers 78,
to 79 and 96) 79 and 96)
z (excluding preset
–
z: Adjustable/can be set
–: Not adjustable/cannot be set
Note
When connecting a cable such as an HDMI cable, etc., check the type of the signal in the Information
Compatible 3D Signals
This unit accepts the following types of 3D signals.
Resolution
3D signal format
720/60p, 720/50p
Side-by-Side format
Over-Under format*
Frame packing*
1080/60i, 1080/50i
1080/24P
Side-by-Side format
Frame packing
Side-by-Side format
Over-Under format*
Frame packing*
1080/60p, 1080/50p
Side-by-Side format
Over-Under format
*: Mandatory 3D format of the HDMI standards.
3D Signals and Adjustable/Setting Items
Some items on the menus may not be available to adjust/set, depending on the 3D signals.
The items that cannot be adjusted are not displayed on the menu. The following tables indicate
those items.
3D signals
Item
Reality Creation
720/60p,
720/50p
1080/60i,
1080/50i
1080/24p
1080/60p,
1080/50p
z
z
z
–
z
Advanced Iris
Lamp Control
–
–
–
z
z
–
z
z
–
z
z
–
z
z
–
1
Motionflow*
NR
MPEG NR
–
–
–
–
56 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
3D signals
Item
720/60p,
720/50p
1080/60i,
1080/50i
1080/24p
1080/60p,
1080/50p
Smooth Gradation
Film Mode
–
–
–
z
z
z
–
–
–
–
x.v.Color
z
z
z
2
Aspect*
z
z
z
z: Adjustable/can be set
–: Not adjustable/cannot be set
*1: The item is not available for Frame Packing/Over-Under on 720/60p, or Over-Under on 1080/
60p.
When the unit is set to convert 2D video images to 3D video images, some items on the menus
may be not available to adjust/set, depending on the “3D Format” settings on the Function
menu. The items that cannot be adjusted are not displayed on the menu. The following tables
indicate these items.
3D signals
Item
Over-Under
Side-by-Side
Simulated 3D
Reality Creation
Advanced Iris
Lamp Control
z
z
z
–
–
–
z
z
–
z
z
–
z
z
z
z
z
z
z
z
1
Motionflow*
NR
MPEG NR
Smooth Gradation
–
–
–
–
2
Film Mode*
–
z
z
z
x.v.Color
z
3
Aspect*
z
z: Adjustable/can be set
–: Not adjustable/cannot be set
*1: The item is not available for Over-Under on 720/60p, or Over-Under on 1080/60p.
*2: The item is not available for 720/60p, or Over-Under on 1080/60p.
Specifications 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Aspect Mode
Selectable items vary depending on the type of input signal or 3D format.
For details, see the tables below. Items that cannot be selected are not displayed in the menu.
2D
1920 × 1080
1280 × 720
720 × 480
720 × 576
Acceptable signals
4096 × 2160
76 to 79, 96
3840 × 2160
Others
Preset memory
number (page 53)
74, 75, 93 to
95
26, 32, 37, 45,
47, 50, 55
7, 8, 10 to 14
5, 6
1.85:1 Zoom
2.35:1 Zoom
Normal
–
–
–
z
z
–
z
z
z
z
z
–
z
z
z
z
z
z
–
–
1
1
z*
z*
V Stretch
Squeeze
–
–
–
–
–
–
–
Stretch
–
*1: Not displayed in the menu as fixed at Normal.
3D
Acceptable signals
1920 × 1080, 1280 × 720
Over-Under Frame packing
3D format
Side-by-Side
7, 8, 10 to 14
Simulated 3D
7, 8, 10 to 14
Preset memory number
10 to 14
18 to 20, 71, 72
1.85:1 Zoom
2.35:1 Zoom
Normal
z
z
z
z
z
–
z
z
z
z
z
–
z
z
z
z
z
–
z
z
z
z
z
–
V Stretch
Squeeze
Stretch
Storage Conditions of Adjustable/Setting Items
Each adjustable/setting item is individually stored for each input connector. For further details,
see the tables below.
Preset memory numbers for each input signal
Input
Preset memory numbers
HDMI 1 (2D)
HDMI 2 (2D)
HDMI 1 (3D)
HDMI 2 (3D)
5 to 8, 10 to 14, 26, 32, 37, 45, 47, 50, 55, 74 to 79, 93 to 96
7, 8, 10 to 14, 18 to 20, 71, 72
58 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture menu
Item
Storage conditions
Calib. Preset
Reset
For each input connector
For each input connector and Calib. Preset
Reality Creation
Advanced Iris
Contrast Enhancer
Lamp Control
Motionflow
Contrast
Brightness
Color
Hue
Color Temp.
D93-D55
Custom 1-5
Gain R
For each Color Temp., Custom 1-5
Gain G
Gain B
Bias R
Bias G
Bias B
Sharpness
NR
For each input connector and Calib. Preset
MPEG NR
Smooth Gradation
Film Mode
Gamma Correction
Color Correction
Clear White
x.v.Color
Color Space
Screen menu
Item
Storage conditions
Aspect
For Picture Position 1.85:1, 2.35:1, or Custom 1-3
Specifications 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Projection Distance and Lens Shift Range
The projection distance refers to the distance between the front of the lens and the projected
surface.
Projection distance L
Front of the lens
Projected image
The lens shift range represents the distance in percent (%) by which the lens can be shifted from
the center of the projected image. The lens shift range is regarded as 0% when the point A in
the illustration (point where a line drawn from the center of the lens and the projected image
cross at right angles) is aligned with the center of the projected image and full width or full
height of the projected image is regarded as 100%.
Projected image
Lens shift range
VS +
Center of the lens
HS +
Center of the
projected image
50%
50%
HS –
Center of the lens
Side of the unit
VS –
A
Projected image
Shaded region: Lens shift range
Projected image
Lens shift range
Center of the lens
Center of the
projected image
50%
50%
A
Top of the unit
VS +: Vertical lens shift range (up) [%]
VS –: Vertical lens shift range (down) [%]
HS +: Horizontal lens shift range (right) [%]
HS –: Horizontal lens shift range (left) [%]
60 Projection Distance and Lens Shift Range
Download from Www.Somanuals.com. All Manuals Search And Download.
When projecting in 1.90:1 (Native Full Display 17:9) format
1.90
1
Projection distance
Unit: m (inches)
Projection distance L
Projection image size
Diagonal
Width × Height
80" (2.03 m)
100" (2.54 m)
120" (3.05 m)
150" (3.81 m)
200" (5.08 m)
1.80 × 0.95 (71 × 37)
2.25 × 1.18 (88 × 47)
2.70 × 1.42 (106 × 56)
3.37 × 1.78 (133 × 70)
4.49 × 2.37 (177 × 93)
2.32 – 4.77 (91 – 187)
2.90 – 5.97 (115 – 235)
3.49 – 7.18 (138 – 282)
4.38 – 8.98 (173 – 353)
5.85 – 11.99 (231 – 472)
Projection distance formula
D: Projected image size (Diagonal)
Unit: m (inches)
Projection distance L (minimal length)
Projection distance L (maximal length)
L = 0.029432 × D – 0.0434
(L = 1.158727 × D – 1.7084)
L = 0.060197 × D – 0.0420
(L = 2.369978 × D – 1.6545)
Lens shift range
85%
VS + = 85 – 2.742 × (HS + or HS –) [%]
VS – = 80 – 2.742 × (HS + or HS –) [%]
HS + = HS – = 31 – 0.365 × (VS + or VS –) [%]
31%
31%
80%
Projection Distance and Lens Shift Range 61
Download from Www.Somanuals.com. All Manuals Search And Download.
When projecting in 1.78:1 (16:9) format
1.78
Video display area
1
Projection area
Projection distance
Unit: m (inches)
Projection distance L
Projection image size
Diagonal
Width × Height
80" (2.03 m)
100" (2.54 m)
120" (3.05 m)
150" (3.81 m)
200" (5.08 m)
1.77 × 1.00 (70 × 39)
2.21 × 1.25 (87 × 49)
2.66 × 1.49 (105 × 59)
3.32 × 1.87 (131 × 74)
4.43 ×2.49 (174 × 98)
2.44 – 5.01 (96 – 197)
3.05 – 6.28 (121 – 247)
3.67 – 7.55 (145 – 297)
4.60 – 9.44 (181 – 371)
6.15 – 12.61 (242 – 496)
Projection distance formula
D: Projected image size (Diagonal)
Unit: m (inches)
Projection distance L (minimal length)
Projection distance L (maximal length)
L = 0.030934 × D – 0.0434
(L = 1.217856 × D – 1.7084)
L = 0.063269 × D – 0.0420
(L = 2.490916 × D – 1.6545)
Lens shift range
85%
33%
33%
VS + = 85 – 2.576 × (HS + or HS –) [%]
VS – = 80 – 2.576 × (HS + or HS –) [%]
HS + = HS – = 33 – 0.388 × (VS + or VS –) [%]
80%
62 Projection Distance and Lens Shift Range
Download from Www.Somanuals.com. All Manuals Search And Download.
When projecting in 2.35:1 format
2.35
Video display area
Projection area
1
Projection distance
Unit: m (inches)
Projection distance L
Projection image size
Diagonal
Width × Height
80" (2.03 m)
100" (2.54 m)
120" (3.05 m)
150" (3.81 m)
200" (5.08 m)
1.87 × 0.80 (74 × 31)
2.34 × 0.99 (92 × 39)
2.80 × 1.19 (110 × 47)
3.51 × 1.49 (138 × 59)
4.67 × 1.99 (184 × 78)
2.41 – 4.96 (95 – 195)
3.02 – 6.22 (119 – 244)
3.64 – 7.47 (143 – 294)
4.55 – 9.35 (180 – 368)
6.08 – 12.48 (240 – 491)
Projection distance formula
D: Projected image size (Diagonal)
Unit: m (inches)
Projection distance L (minimal length)
Projection distance L (maximal length)
L = 0.030617 × D – 0.0434
(L = 1.205377 × D – 1.7084)
L = 0.062621 × D – 0.0420
(L = 2.465393 × D – 1.6545)
Lens shift range
105%
31%
31%
VS + = 105 – 3.387× (HS + or HS –) [%]
VS – = 99 – 3.387 × (HS + or HS –) [%]
HS + = HS – = 31 – 0.295 × (VS + or VS –) [%]
99%
Projection Distance and Lens Shift Range 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
Front
Unit: mm (inches)
495.6 (19 1/2)
247.8 (9 3/4)
247.8 (9 3/4)
Center of the
lens
Bottom
Unit: mm (inches)
Front of the cabinet
87.3 (3 7
/
)
16
142.8 (5 5/8)
150.6 (5 15
/
)
16
408.9 (16 3
/
)
7.5 (9/32
)
32
463.6 (18 1/4)
64 Dimensions
Download from Www.Somanuals.com. All Manuals Search And Download.
The distance between the front of the lens and the front of the cabinet
Unit: mm (inches)
36.8 (1 7
/
)
16
Front of the lens
Front of the cabinet
Attaching the PSS-H10 projector suspension support
Front view
Unit: mm (inches)
150 (5 29
75
/
)
32
(2 15
/
)
16
8
(5/16
)
Ceiling
Center of the
supporting pole
The bottom
surface of the
mount bracket
Center of the lens
Dimensions 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Side view
Unit: mm (inches)
213.5 (8 13
/
)
130 (5 1/8)
32
Front of the cabinet
258.5 (10 3
/
)
16
463.6 (18 1/4)
Top view
Unit: mm (inches)
213.4 (8 13
/
)
130 (5 1/8)
32
Front of the cabinet
Upper ceiling mount bracket
258.5 (10 3
/
)
16
Center of the supporting pole (The center of the
supporting pole is different from that of the unit.)
66 Dimensions
Download from Www.Somanuals.com. All Manuals Search And Download.
Preamble
The licenses for most software are designed
to take away your freedom to share and
change it. By contrast, the GNU General
Public License is intended to guarantee your
freedom to share and change free software--
to make sure the software is free for all its
users. This General Public License applies to
most of the Free Software Foundation’s
software and to any other program whose
authors commit to using it. (Some other Free
Software Foundation software is covered by
the GNU Library General Public License
instead.) You can apply it to your programs,
too.
When we speak of free software, we are
referring to freedom, not price. Our General
Public Licenses are designed to make sure
that you have the freedom to distribute
copies of free software (and charge for this
service if you wish), that you receive source
code or can get it if you want it, that you can
change the software or use pieces of it in new
free programs; and that you know you can do
these things.
NOTICES AND
LICENSES
FOR SOFTWARE
USED IN THIS
PRODUCT
GPL/LGPL LICENSED
SOFTWARE
The following GPL executables and LGPL
libraries are used in this product and are
subject to the GPL/LGPL License
Agreements included as part of this
documentation:
Package list:
linux-kernel
alsa-lib
busybox
crypto
directfb
dosfstools
To protect your rights, we need to make
restrictions that forbid anyone to deny you
these rights or to ask you to surrender the
rights. These restrictions translate to certain
responsibilities for you if you distribute
copies of the software, or if you modify it.
For example, if you distribute copies of such
a program, whether gratis or for a fee, you
must give the recipients all the rights that
you have. You must make sure that they, too,
receive or can get the source code. And you
must show them these terms so they know
their rights.
We protect your rights with two steps: (1)
copyright the software, and (2) offer you this
license which gives you legal permission to
copy, distribute and/or modify the software.
Also, for each author’s protection and ours,
we want to make certain that everyone
understands that there is no warranty for this
free software. If the software is modified by
someone else and passed on, we want its
recipients to know that what they have is not
the original, so that any problems introduced
by others will not reflect on the original
authors’ reputations.
e2fsprogs
exceptionmonitor
fuse
gdisk
glib
glibc
iptables
libmicrohttpd
libnuma (in numactl)
procps
pump-autoip
XZ utils
Source code for these executables and
libraries, as well as other executables and
libraries, can be obtained using the
following link:
===============================
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software
Foundation, Inc., 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301, USA.
Everyone is permitted to copy and distribute
verbatim copies of this license document,
but changing it is not allowed.
Finally, any free program is threatened
constantly by software patents. We wish to
NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT 67
Download from Www.Somanuals.com. All Manuals Search And Download.
avoid the danger that redistributors of a free
program will individually obtain patent
licenses, in effect making the program
proprietary. To prevent this, we have made it
clear that any patent must be licensed for
everyone’s free use or not licensed at all.
The precise terms and conditions for
copying, distribution and modification
follow.
2. You may modify your copy or copies of
the Program or any portion of it, thus
forming a work based on the Program, and
copy and distribute such modifications or
work under the terms of Section 1 above,
provided that you also meet all of these
conditions:
a) You must cause the modified files to carry
prominent notices stating that you changed
the files and the date of any change.
b) You must cause any work that you
distribute or publish, that in whole or in part
contains or is derived from the Program or
any part thereof, to be licensed as a whole at
no charge to all third parties under the terms
of this License.
c) If the modified program normally reads
commands interactively when run, you must
cause it, when started running for such
interactive use in the most ordinary way, to
print or display an announcement including
an appropriate copyright notice and a notice
that there is no warranty (or else, saying that
you provide a warranty) and that users may
redistribute the program under these
conditions, and telling the user how to view
a copy of this License. (Exception: if the
Program itself is interactive but does not
normally print such an announcement, your
work based on the Program is not required to
print an announcement.)
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or
other work which contains a notice placed
by the copyright holder saying it may be
distributed under the terms of this General
Public License. The “Program”, below,
refers to any such program or work, and a
“work based on the Program” means either
the Program or any derivative work under
copyright law: that is to say, a work
containing the Program or a portion of it,
either verbatim or with modifications and/or
translated into another language.
(Hereinafter, translation is included without
limitation in the term “modification”.) Each
licensee is addressed as “you”.
Activities other than copying, distribution
and modification are not covered by this
License; they are outside its scope. The act
of running the Program is not restricted, and
the output from the Program is covered only
if its contents constitute a work based on the
Program (independent of having been made
by running the Program). Whether that is
true depends on what the Program does.
1. You may copy and distribute verbatim
copies of the Program’s source code as you
receive it, in any medium, provided that you
conspicuously and appropriately publish on
each copy an appropriate copyright notice
and disclaimer of warranty; keep intact all
the notices that refer to this License and to
the absence of any warranty; and give any
other recipients of the Program a copy of this
License along with the Program.
These requirements apply to the modified
work as a whole. If identifiable sections of
that work are not derived from the Program,
and can be reasonably considered
independent and separate works in
themselves, then this License, and its terms,
do not apply to those sections when you
distribute them as separate works. But when
you distribute the same sections as part of a
whole which is a work based on the
Program, the distribution of the whole must
be on the terms of this License, whose
permissions for other licensees extend to the
entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to
claim rights or contest your rights to work
written entirely by you; rather, the intent is to
exercise the right to control the distribution
of derivative or collective works based on
the Program.
You may charge a fee for the physical act of
transferring a copy, and you may at your
option offer warranty protection in exchange
for a fee.
68 NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
In addition, mere aggregation of another
work not based on the Program with the
Program (or with a work based on the
Program) on a volume of a storage or
distribution medium does not bring the other
work under the scope of this License.
3. You may copy and distribute the Program
(or a work based on it, under Section 2) in
object code or executable form under the
terms of Sections 1 and 2 above provided
that you also do one of the following:
a) Accompany it with the complete
corresponding machine-readable source
code, which must be distributed under the
terms of Sections 1 and 2 above on a medium
customarily used for software interchange;
or,
b) Accompany it with a written offer, valid
for at least three years, to give any third
party, for a charge no more than your cost of
physically performing source distribution, a
complete machine-readable copy of the
corresponding source code, to be distributed
under the terms of Sections 1 and 2 above on
a medium customarily used for software
interchange; or,
c) Accompany it with the information you
received as to the offer to distribute
corresponding source code. (This alternative
is allowed only for noncommercial
distribution and only if you received the
program in object code or executable form
with such an offer, in accord with Subsection
b above.)
The source code for a work means the
preferred form of the work for making
modifications to it. For an executable work,
complete source code means all the source
code for all modules it contains, plus any
associated interface definition files, plus the
scripts used to control compilation and
installation of the executable. However, as a
special exception, the source code
distributed need not include anything that is
normally distributed (in either source or
binary form) with the major components
(compiler, kernel, and so on) of the operating
system on which the executable
access to copy the source code from the
same place counts as distribution of the
source code, even though third parties are
not compelled to copy the source along with
the object code.
4. You may not copy, modify, sublicense, or
distribute the Program except as expressly
provided under this License. Any attempt
otherwise to copy, modify, sublicense or
distribute the Program is void, and will
automatically terminate your rights under
this License.
However, parties who have received copies,
or rights, from you under this License will
not have their licenses terminated so long as
such parties remain in full compliance.
5. You are not required to accept this
License, since you have not signed it.
However, nothing else grants you
permission to modify or distribute the
Program or its derivative works. These
actions are prohibited by law if you do not
accept this License. Therefore, by modifying
or distributing the Program (or any work
based on the Program), you indicate your
acceptance of this License to do so, and all
its terms and conditions for copying,
distributing or modifying the Program or
works based on it.
6. Each time you redistribute the Program
(or any work based on the Program), the
recipient automatically receives a license
from the original licensor to copy, distribute
or modify the Program subject to these terms
and conditions. You may not impose any
further restrictions on the recipients’
exercise of the rights granted herein. You are
not responsible for enforcing compliance by
third parties to this License.
7. If, as a consequence of a court judgment
or allegation of patent infringement or for
any other reason (not limited to patent
issues), conditions are imposed on you
(whether by court order, agreement or
otherwise) that contradict the conditions of
this License, they do not excuse you from the
conditions of this License. If you cannot
distribute so as to satisfy simultaneously
your obligations under this License and any
other pertinent obligations, then as a
consequence you may not distribute the
Program at all. For example, if a patent
license would not permit royalty-free
runs, unless that component itself
accompanies the executable.
If distribution of executable or object code is
made by offering access to copy from a
designated place, then offering equivalent
NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT 69
Download from Www.Somanuals.com. All Manuals Search And Download.
redistribution of the Program by all those
who receive copies directly or indirectly
through you, then the only way you could
satisfy both it and this License would be to
refrain entirely from distribution of the
Program.
by the Free Software Foundation. If the
Program does not specify a version number
of this License, you may choose any version
ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the
Program into other free programs whose
distribution conditions are different, write to
the author to ask for permission. For
software which is copyrighted by the Free
Software Foundation, write to the Free
Software Foundation; we sometimes make
exceptions for this. Our decision will be
guided by the two goals of preserving the
free status of all derivatives of our free
software and of promoting the sharing and
reuse of software generally.
If any portion of this section is held invalid
or unenforceable under any particular
circumstance, the balance of the section is
intended to apply and the section as a whole
is intended to apply in other circumstances.
It is not the purpose of this section to induce
you to infringe any patents or other property
right claims or to contest validity of any such
claims; this section has the sole purpose of
protecting the integrity of the free software
distribution system, which is implemented
by public license practices. Many people
have made generous contributions to the
wide range of software distributed through
that system in reliance on consistent
application of that system; it is up to the
author/donor to decide if he or she is willing
to distribute software through any other
system and a licensee cannot impose that
choice.
NO WARRANTY
BECAUSE THE PROGRAM IS
LICENSED FREE OF CHARGE, THERE
IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED
IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM “AS IS”
WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE
This section is intended to make thoroughly
clear what is believed to be a consequence of
the rest of this License.
8. If the distribution and/or use of the
Program is restricted in certain countries
either by patents or by copyrighted
interfaces, the original copyright holder who
places the Program under this License may
add an explicit geographical distribution
limitation excluding those countries, so that
distribution is permitted only in or among
countries not thus excluded. In such case,
this License incorporates the limitation as if
written in the body of this License.
9. The Free Software Foundation may
publish revised and/or new versions of the
General Public License from time to time.
Such new versions will be similar in spirit to
the present version, but may differ in detail
to address new problems or concerns.
Each version is given a distinguishing
version number.
PROGRAM IS WITH YOU.
SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST
OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
IN NO EVENT UNLESS REQUIRED BY
APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS
PERMITTED ABOVE, BE LIABLE TO
YOU FOR DAMAGES, INCLUDING
ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM
If the Program specifies a version number of
this License which applies to it and “any
later version”, you have the option of
following the terms and conditions either of
that version or of any later version published
70 NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
(INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE
PROGRAM TO OPERATE WITH ANY
OTHER PROGRAMS), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Gnomovision version 69, Copyright (C) year
name of author Gnomovision comes with
ABSOLUTELY NO WARRANTY; for
details type ‘show w’.
This is free software, and you are welcome
to redistribute it under certain conditions;
type ‘show c’ for details.
The hypothetical commands ‘show w’ and
‘show c’ should show the appropriate parts
of the General Public License. Of course, the
commands you use may be called something
other than ‘show w’ and ‘show c’; they could
even be mouse-clicks or menu items--
whatever suits your program.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Programs
If you develop a new program, and you want
it to be of the greatest possible use to the
public, the best way to achieve this is to
make it free software which everyone can
redistribute and change under these terms.
To do so, attach the following notices to the
program. It is safest to attach them to the
start of each source file to most effectively
convey the exclusion of warranty; and each
file should have at least the “copyright” line
and a pointer to where the full notice is
found.
<one line to give the program’s name and a
brief idea of what it does.> Copyright (C)
<year> <name of author>
This program is free software; you can
redistribute it and/or modify it under the
terms of the GNU General Public License as
published by the Free Software Foundation;
either version 2 of the License, or (at your
option) any later version.
You should also get your employer (if you
work as a programmer) or your school, if
any, to sign a “copyright disclaimer” for the
program, if necessary. Here is a sample; alter
the names:
Yoyodyne, Inc., hereby disclaims all
copyright interest in the program
‘Gnomovision’ (which makes passes at
compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit
incorporating your program into proprietary
programs.
If your program is a subroutine library, you
may consider it more useful to permit
linking proprietary applications with the
library. If this is what you want to do, use the
GNU Library General Public License
instead of this License.
===============================
This program is distributed in the hope that
it will be useful, but WITHOUT ANY
WARRANTY; without even the implied
warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU
General Public License along with this
program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301, USA.
Also add information on how to contact you
by electronic and paper mail.
GNU LESSER GENERAL PUBLIC
LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software
Foundation, Inc. 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301, USA.
Everyone is permitted to copy and distribute
verbatim copies of this license document,
but changing it is not allowed.
[This is the first released version of the
Lesser GPL. It also counts as the successor
of the GNU Library Public License, version
2, hence the version number 2.1.]
If the program is interactive, make it output
a short notice like this when it starts in an
interactive mode:
Preamble
The licenses for most software are designed
to take away your freedom to share and
NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT 71
Download from Www.Somanuals.com. All Manuals Search And Download.
change it. By contrast, the GNU General
Public Licenses are intended to guarantee
your freedom to share and change free
software-to make sure the software is free
for all its users.
by someone else and passed on, the
recipients should know that what they have
is not the original version, so that the
original author’s reputation will not be
affected by problems that might be
This license, the Lesser General Public
License, applies to some specially
introduced by others.
Finally, software patents pose a constant
threat to the existence of any free program.
We wish to make sure that a company cannot
effectively restrict the users of a free
program by obtaining a restrictive license
from a patent holder. Therefore, we insist
that any patent license obtained for a version
of the library must be consistent with the full
freedom of use specified in this license.
Most GNU software, including some
libraries, is covered by the ordinary GNU
General Public License. This license, the
GNU Lesser General Public License, applies
to certain designated libraries, and is quite
different from the ordinary General Public
License. We use this license for certain
libraries in order to permit linking those
libraries into non-free programs.
When a program is linked with a library,
whether statically or using a shared library,
the combination of the two is legally
speaking a combined work, a derivative of
the original library. The ordinary General
Public License therefore permits such
linking only if the entire combination fits its
criteria of freedom. The Lesser General
Public License permits more lax criteria for
linking other code with the library.
designated software packagestypically
libraries--of the Free Software Foundation
and other authors who decide to use it. You
can use it too, but we suggest you first think
carefully about whether this license or the
ordinary General Public License is the better
strategy to use in any particular case, based
on the explanations below.
When we speak of free software, we are
referring to freedom of use, not price. Our
General Public Licenses are designed to
make sure that you have the freedom to
distribute copies of free software (and
charge for this service if you wish); that you
receive source code or can get it if you want
it; that you can change the software and use
pieces of it in new free programs; and that
you are informed that you can do these
things.
To protect your rights, we need to make
restrictions that forbid distributors to deny
you these rights or to ask you to surrender
these rights. These restrictions translate to
certain responsibilities for you if you
distribute copies of the library or if you
modify it.
For example, if you distribute copies of the
library, whether gratis or for a fee, you must
give the recipients all the rights that we gave
you. You must make sure that they, too,
receive or can get the source code. If you
link other code with the library, you must
provide complete object files to the
recipients, so that they can relink them with
the library after making changes to the
library and recompiling it. And you must
show them these terms so they know their
rights.
We call this license the “Lesser” General
Public License because it does Less to
protect the user’s freedom than the ordinary
General Public License. It also provides
other free software developers Less of an
advantage over competing non-free
programs. These disadvantages are the
reason we use the ordinary General Public
License for many libraries. However, the
Lesser license provides advantages in
certain special circumstances.
We protect your rights with a two-step
method: (1) we copyright the library, and (2)
we offer you this license, which gives you
legal permission to copy, distribute and/or
modify the library.
To protect each distributor, we want to make
it very clear that there is no warranty for the
free library. Also, if the library is modified
For example, on rare occasions, there may
be a special need to encourage the widest
possible use of a certain library, so that it
becomes a de-facto standard. To achieve
this, non-free programs must be allowed to
use the library. A more frequent case is that
a free library does the same job as widely
used non-free libraries. In this case, there is
72 NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
little to gain by limiting the free library to
free software only, so we use the Lesser
General Public License.
included without limitation in the term
“modification”.)
“Source code” for a work means the
preferred form of the work for making
modifications to it. For a library, complete
source code means all the source code for all
modules it contains, plus any associated
interface definition files, plus the scripts
used to control compilation and installation
of the library.
Activities other than copying, distribution
and modification are not covered by this
License; they are outside its scope. The act
of running a program using the Library is not
restricted, and output from such a program is
covered only if its contents constitute a work
based on the Library (independent of the use
of the Library in a tool for writing it).
Whether that is true depends on what the
Library does and what the program that uses
the Library does.
1. You may copy and distribute verbatim
copies of the Library’s complete source code
as you receive it, in any medium, provided
that you conspicuously and appropriately
publish on each copy an appropriate
copyright notice and disclaimer of warranty;
keep intact all the notices that refer to this
License and to the absence of any warranty;
and distribute a copy of this License along
with the Library.
You may charge a fee for the physical act of
transferring a copy, and you may at your
option offer warranty protection in exchange
for a fee.
2. You may modify your copy or copies of
the Library or any portion of it, thus forming
a work based on the Library, and copy and
distribute such modifications or work under
the terms of Section 1 above, provided that
you also meet all of these conditions:
a) The modified work must itself be a
software library.
b) You must cause the files modified to carry
prominent notices stating that you changed
the files and the date of any change.
c) You must cause the whole of the work to
be licensed at no charge to all third parties
under the terms of this License.
In other cases, permission to use a particular
library in non-free programs enables a
greater number of people to use a large body
of free software. For example, permission to
use the GNU C Library in non-free programs
enables many more people to use the whole
GNU operating system, as well as its variant,
the GNU/Linux operating system.
Although the Lesser General Public License
is Less protective of the users’ freedom, it
does ensure that the user of a program that is
linked with the Library has the freedom and
the wherewithal to run that program using a
modified version of the Library.
The precise terms and conditions for
copying, distribution and modification
follow. Pay close attention to the difference
between a “work based on the library” and a
“work that uses the library”. The former
contains code derived from the library,
whereas the latter must be combined with
the library in order to run.
GNU LESSER GENERAL PUBLIC
LICENSE TERMS AND CONDITIONS
FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License Agreement applies to any
software library or other program which
contains a notice placed by the copyright
holder or other authorized party saying it
may be distributed under the terms of this
Lesser General Public License (also called
“this License”). Each licensee is addressed
as “you”.
A “library” means a collection of software
functions and/or data prepared so as to be
conveniently linked with application
programs (which use some of those
functions and data) to form executables.
The “Library”, below, refers to any such
software library or work which has been
distributed under these terms.
A “work based on the Library” means either
the Library or any derivative work under
copyright law: that is to say, a work
containing the Library or a portion of it,
either verbatim or with modifications and/or
translated straightforwardly into another
language. (Hereinafter, translation is
d) If a facility in the modified Library refers
to a function or a table of data to be supplied
by an application program that uses the
facility, other than as an argument passed
NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT 73
Download from Www.Somanuals.com. All Manuals Search And Download.
when the facility is invoked, then you must
make a good faith effort to ensure that, in the
event an application does not supply such
function or table, the facility still operates,
and performs whatever part of its purpose
remains meaningful.
(For example, a function in a library to
compute square roots has a purpose that is
entirely well-defined independent of the
application. Therefore, Subsection 2d
requires that any application-supplied
function or table used by this function must
be optional: if the application does not
supply it, the square root function must still
compute square roots.)
instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it
is irreversible for that copy, so the ordinary
GNU General Public License applies to all
subsequent copies and derivative works
made from that copy. This option is useful
when you wish to copy part of the code of
the Library into a program that is not a
library.
4. You may copy and distribute the Library
(or a portion or derivative of it, under Section
2) in object code or executable form under
the terms of Sections 1 and 2 above provided
that you accompany it with the complete
corresponding machine-readable source
code, which must be distributed under the
terms of Sections 1 and 2 above on a medium
customarily used for software interchange.
If distribution of object code is made by
offering access to copy from a designated
place, then offering equivalent access to
copy the source code from the same place
satisfies the requirement to distribute the
source code, even though third parties are
not compelled to copy the source along with
the object code.
These requirements apply to the modified
work as a whole. If identifiable sections of
that work are not derived from the Library,
and can be reasonably considered
independent and separate works in
themselves, then this License, and its terms,
do not apply to those sections when you
distribute them as separate works. But when
you distribute the same sections as part of a
whole which is a work based on the Library,
the distribution of the whole must be on the
terms of this License, whose permissions for
other licensees extend to the entire whole,
and thus to each and every part regardless of
who wrote it.
Thus, it is not the intent of this section to
claim rights or contest your rights to work
written entirely by you; rather, the intent is to
exercise the right to control the distribution
of derivative or collective works based on
the Library.
5. A program that contains no derivative of
any portion of the Library, but is designed to
work with the Library by being compiled or
linked with it, is called a “work that uses the
Library”. Such a work, in isolation, is not a
derivative work of the Library, and therefore
falls outside the scope of this License.
However, linking a “work that uses the
Library” with the Library creates an
In addition, mere aggregation of another
work not based on the Library with the
Library (or with a work based on the
Library) on a volume of a storage or
distribution medium does not bring the other
work under the scope of this License.
3. You may opt to apply the terms of the
ordinary GNU General Public License
instead of this License to a given copy of the
Library. To do this, you must alter all the
notices that refer to this License, so that they
refer to the ordinary GNU General Public
License, version 2, instead of to this License.
(If a newer version than version 2 of the
ordinary GNU General Public License has
appeared, then you can specify that version
executable that is a derivative of the Library
(because it contains portions of the Library),
rather than a “work that uses the library”.
The executable is therefore covered by this
License. Section 6 states terms for
distribution of such executables.
When a “work that uses the Library” uses
material from a header file that is part of the
Library, the object code for the work may be
a derivative work of the Library even though
the source code is not. Whether this is true is
especially significant if the work can be
linked without the Library, or if the work is
itself a library. The threshold for this to be
true is not precisely defined by law.
If such an object file uses only numerical
parameters, data structure layouts and
74 NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
accessors, and small macros and small inline
functions (ten lines or less in length), then
the use of the object file is unrestricted,
regardless of whether it is legally a
derivative work. (Executables containing
this object code plus portions of the Library
will still fall under Section 6.)
Otherwise, if the work is a derivative of the
Library, you may distribute the object code
for the work under the terms of Section 6.
Any executables containing that work also
fall under Section 6, whether or not they are
linked directly with the Library itself.
6. As an exception to the Sections above,
you may also combine or link a “work that
uses the Library” with the Library to
library functions into the executable, and (2)
will operate properly with a modified
version of the library, if the user installs one,
as long as the modified version is interface-
compatible with the version that the work
was made with.
c) Accompany the work with a written offer,
valid for at least three years, to give the same
user the materials specified in Subsection 6a,
above, for a charge no more than the cost of
performing this distribution.
d) If distribution of the work is made by
offering access to copy from a designated
place, offer equivalent access to copy the
above specified materials from the same
place.
produce a work containing portions of the
Library, and distribute that work under terms
of your choice, provided that the terms
permit modification of the work for the
customer’s own use and reverse engineering
for debugging such modifications.
You must give prominent notice with each
copy of the work that the Library is used in
it and that the Library and its use are covered
by this License. You must supply a copy of
this License. If the work during execution
displays copyright notices, you must include
the copyright notice for the Library among
them, as well as a reference directing the
user to the copy of this License. Also, you
must do one of these things:
a) Accompany the work with the complete
corresponding machine-readable source
code for the Library including whatever
changes were used in the work (which must
be distributed under Sections 1 and 2 above);
and, if the work is an executable linked with
the Library, with the complete machine-
readable “work that uses the Library”, as
object code and/or source code, so that the
user can modify the Library and then relink
to produce a modified executable containing
the modified Library. (It is understood that
the user who changes the contents of
e) Verify that the user has already received a
copy of these materials or that you have
already sent this user a copy.
For an executable, the required form of the
“work that uses the Library” must include
any data and utility programs needed for
reproducing the executable from it.
However, as a special exception, the
materials to be distributed need not include
anything that is normally distributed (in
either source or binary form) with the major
components (compiler, kernel, and so on) of
the operating system on which the
executable runs, unless that component itself
accompanies the executable.
It may happen that this requirement
contradicts the license restrictions of other
proprietary libraries that do not normally
accompany the operating system. Such a
contradiction means you cannot use both
them and the Library together in an
executable that you distribute.
7. You may place library facilities that are a
work based on the Library side-by-side in a
single library together with other library
facilities not covered by this License, and
distribute such a combined library, provided
that the separate distribution of the work
based on the Library and of the other library
facilities is otherwise permitted, and
provided that you do these two things:
a) Accompany the combined library with a
copy of the same work based on the Library,
uncombined with any other library facilities.
This must be distributed under the terms of
the Sections above.
definitions files in the Library will not
necessarily be able to recompile the
application to use the modified definitions.)
b) Use a suitable shared library mechanism
for linking with the Library. A suitable
mechanism is one that (1) uses at run time a
copy of the library already present on the
user’s computer system, rather than copying
NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT 75
Download from Www.Somanuals.com. All Manuals Search And Download.
b) Give prominent notice with the combined
library of the fact that part of it is a work
based on the Library, and explaining where
to find the accompanying uncombined form
of the same work.
8. You may not copy, modify, sublicense,
link with, or distribute the Library except as
expressly provided under this License. Any
attempt otherwise to copy, modify,
sublicense, link with, or distribute the
Library is void, and will automatically
terminate your rights under this License.
However, parties who have received copies,
or rights, from you under this License will
not have their licenses terminated so long as
such parties remain in full compliance.
9. You are not required to accept this
License, since you have not signed it.
However, nothing else grants you
permission to modify or distribute the
Library or its derivative works. These
actions are prohibited by law if you do not
accept this License. Therefore, by modifying
or distributing the Library (or any work
based on the Library), you indicate your
acceptance of this License to do so, and all
its terms and conditions for copying,
distributing or modifying the Library or
works based on it.
10. Each time you redistribute the Library
(or any work based on the Library), the
recipient automatically receives a license
from the original licensor to copy, distribute,
link with or modify the Library subject to
these terms and conditions. You may not
impose any further restrictions on the
recipients’ exercise of the rights granted
herein. You are not responsible for enforcing
compliance by third parties with this
License.
11. If, as a consequence of a court judgment
or allegation of patent infringement or for
any other reason (not limited to patent
issues), conditions are imposed on you
(whether by court order, agreement or
otherwise) that contradict the conditions of
this License, they do not excuse you from the
conditions of this License. If you cannot
distribute so as to satisfy simultaneously
your obligations under this License and any
other pertinent obligations, then as a
consequence you may not distribute the
Library at all. For example, if a patent
license would not permit royalty-free
redistribution of the Library by all those who
receive copies directly or indirectly through
you, then the only way you could satisfy
both it and this License would be to refrain
entirely from distribution of the Library.
If any portion of this section is held invalid
or unenforceable under any particular
circumstance, the balance of the section is
intended to apply, and the section as a whole
is intended to apply in other circumstances.
It is not the purpose of this section to induce
you to infringe any patents or other property
right claims or to contest validity of any such
claims; this section has the sole purpose of
protecting the integrity of the free software
distribution system which is implemented by
public license practices. Many people have
made generous contributions to the wide
range of software distributed through that
system in reliance on consistent application
of that system; it is up to the author/donor to
decide if he or she is willing to distribute
software through any other system and a
licensee cannot impose that choice.
This section is intended to make thoroughly
clear what is believed to be a consequence of
the rest of this License.
12. If the distribution and/or use of the
Library is restricted in certain countries
either by patents or by copyrighted
interfaces, the original copyright holder who
places the Library under this License may
add an explicit geographical distribution
limitation excluding those countries, so that
distribution is permitted only in or among
countries not thus excluded. In such case,
this License incorporates the limitation as if
written in the body of this License.
13. The Free Software Foundation may
publish revised and/or new versions of the
Lesser General Public License from time to
time. Such new versions will be similar in
spirit to the present version, but may differ in
detail to address new problems or concerns.
Each version is given a distinguishing
version number.
If the Library specifies a version number of
this License which applies to it and “any
later version”, you have the option of
following the terms and conditions either of
that version or of any later version published
by the Free Software Foundation. If the
76 NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
Library does not specify a license version
number, you may choose any version ever
published by the Free Software Foundation.
14. If you wish to incorporate parts of the
Library into other free programs whose
distribution conditions are incompatible
with these, write to the author to ask for
permission. For software which is
LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE
LIBRARY TO OPERATE WITH ANY
OTHER SOFTWARE), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
copyrighted by the Free Software
Foundation, write to the Free Software
Foundation; we sometimes make exceptions
for this. Our decision will be guided by the
two goals of preserving the free status of all
derivatives of our free software and of
promoting the sharing and reuse of software
generally.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Libraries
If you develop a new library, and you want it
to be of the greatest possible use to the
public, we recommend making it free
software that everyone can redistribute and
change. You can do so by permitting
redistribution under these terms (or,
alternatively, under the terms of the ordinary
General Public License).
To apply these terms, attach the following
notices to the library. It is safest to attach
them to the start of each source file to most
effectively convey the exclusion of warranty;
and each file should have at least the
“copyright” line and a pointer to where the
full notice is found.
NO WARRANTY
15. BECAUSE THE LIBRARY IS
LICENSED FREE OF CHARGE, THERE
IS NO WARRANTY FOR THE LIBRARY,
TO THE EXTENT PERMITTED BY
APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED
IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES
PROVIDE THE LIBRARY “AS IS”
WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE
<one line to give the library’s name and a
brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can
redistribute it and/or modify it under the
terms of the GNU Lesser General Public
license as published by the Free Software
Foundation; either version 2.1 of the
License, or (at your option) any later
version.
LIBRARY IS WITH YOU. SHOULD THE
LIBRARY PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR
CORRECTION.
16. IN NO EVENT UNLESS REQUIRED
BY APPLICABLE LAW OR AGREED TO
IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR
This library is distributed in the hope that it
will be useful, but WITHOUT ANY
WARRANTY; without even the implied
warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR
PURPOSE. See the GNU Lesser General
Public License for more details.
REDISTRIBUTE THE LIBRARY AS
PERMITTED ABOVE, BE LIABLE TO
YOU FOR DAMAGES, INCLUDING
ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE LIBRARY
(INCLUDING BUT NOT LIMITED TO
You should have received a copy of the GNU
Lesser General Public License along with
this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301, USA.
Also add information on how to contact you
by electronic and paper mail.
NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT 77
Download from Www.Somanuals.com. All Manuals Search And Download.
You should also get your employer (if you
work as a programmer) or your school, if
any, to sign a “copyright disclaimer” for the
library, if necessary. Here is a sample; alter
the names:
Yoyodyne, Inc., hereby disclaims all
copyright interest in the library ‘Frob’ (a
library for tweaking knobs) written by James
Random Hacker.
WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
The following notices are required to satisfy
the license terms of the software that we
have mentioned in this document:
This product includes software developed by
the NetBSD Foundation, Inc. and its
contributors.
This product includes software developed by
the University of California, Berkeley and its
contributors.
This product includes software developed
for the NetBSD Project. See http://
NetBSD.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
===============================
Notification of BSD
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met:
1. Redistributions of source code must retain
the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following
This product includes software developed by
Christos Zoulas.
This product includes software developed by
Niels Provos.
disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning
features or use of this software must display
the following acknowledgement:
4. Neither the name of the following
developers nor the names of its contributors
may be used to endorse or promote products
derived from this software without specific
prior written permission.
This product includes software developed by
the University of California, Lawrence
Berkeley Laboratory.
This product includes software developed by
WIDE Project and its contributors.
This product includes software developed by
Brian Aker.
This product includes software developed by
Danga Interactive, Inc.
===============================
THIS SOFTWARE IS PROVIDED BY THE
REGENTS AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED
INDEPENDENT JPEG GROUP
SOFTWARE
This software is based in part on the work of
the Independent JPEG Group.
WARRANTIES OFMERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE REGENTS OR
CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR
===============================
SOFTWARE DEVELOPED BY THE
OPENSSL PROJECT FOR USE IN
THE SSL TOOLKIT
Copyright (c) 1998-2008 The OpenSSL
Project.
CONSEQUENTIAL DAMAGES
All rights reserved.
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY,
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met:
78 NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Redistributions of source code must retain
the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following
disclaimerinthe documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning
features or use of this software must display
the following acknowledgment: “This
product includes software developed by the
OpenSSL Project for use in the OpenSSL
Toolkit. (<http://www.openssl.org/>)”
4. The names “OpenSSL Toolkit” and
“OpenSSL Project” must not be used to
endorse or promote products derived from
this software without prior written
ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
This product includes cryptographic
software written by Eric Young
([email protected]). This product includes
software written by Tim Hudson
([email protected]). Original SSLeay
License
----------------------
Copyright (C) 1995-1998 Eric Young
All rights reserved.
This package is an SSL implementation
The implementation was written so as to
conform with Netscapes SSL.
permission. For written permission, please
contact [email protected].
5. Products derived from this software may
not be called “OpenSSL” nor may
“OpenSSL” appear in their names without
prior written permission of the OpenSSL
Project.
6. Redistributions of any form whatsoever
must retain the following acknowledgment:
“This product includes software developed
by the OpenSSL Project for use in the
>)”
This library is free for commercial and non-
commercial use as long as the following
conditions are adhered to.
The following conditions apply to all code
found in this distribution, be it the RC4,
RSA, lhash, DES, etc., code; not just the
SSL code. The SSL documentation included
with this distribution is covered by the same
copyright terms except that the holder is Tim
Hudson ([email protected]).
Copyright remains Eric Young’s, and as such
any Copyright notices in the code are not to
be removed. If this package is used in a
product, Eric Young should be given
attribution as the author of the parts of the
library used. This can be in the form of a
textual message at program startup or in
documentation (online or textual) provided
with the package.
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met:
THIS SOFTWARE IS PROVIDED BY THE
OpenSSL PROJECT “AS IS’’ AND ANY
EXPRESSED OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED
WARRANTIESOF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE OpenSSL PROJECT
OR ITS CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE)
1. Redistributions of source code must retain
the copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following
disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning
features or use of this software must display
the following acknowledgement: “This
product includes cryptographic software
NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT 79
Download from Www.Somanuals.com. All Manuals Search And Download.
written by Eric Young
The word ‘cryptographic’ can be left out if
the routines from the library being used are
not cryptographic related:-).
Copyright (c) 1998, 1999, 2000 Thai Open
Source Software Center Ltd and Clark
Cooper
Copyright (c) 2001, 2002, 2003, 2004, 2005,
2006 Expat maintainers.
4. If you include any Windows specific code
(or a derivative thereof) from the apps
directory (application code) you must
include an acknowledgement: “This product
includes software written by Tim Hudson
JSONcpp Copyright (c) 2007-2010 Baptiste
Lepilleur
yaml-cpp Copyright (c) 2008 Jesse Beder.
cJSON Copyright (c) 2009 Dave Gamble
GIFLIB Copyright (c) 1997 Eric S.
Raymond
Permission is hereby granted, free of charge,
to any person obtaining a copy of this
software and associated documentation files
(the “Software”), to deal in the Software
without restriction, including without
limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit
persons to whom the Software is furnished
to do so, subject to the following conditions:
The above copyright notice and this
permission notice shall be included in all
copies or substantial portions of the
Software.
THIS SOFTWARE IS PROVIDED BY
ERIC YOUNG “AS IS’’ AND ANY
EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL
THE AUTHOR OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
THE SOFTWARE IS PROVIDED “AS IS”,
WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE
WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE
FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF
OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
===============================
The license and distribution terms for any
publically available version or derivative of
this code cannot be changed. i.e. this code
cannot simply be copied and put under
another distribution license [including the
GNU Public License.]
===============================
FREETYPE/FREETYPE2
SOFTWARE
The software is based in part of the work of
the FreeType Team.
CURL SOFTWARE
COPYRIGHT AND PERMISSION
NOTICE. Copyright (c)
1996 - 2012, Daniel Stenberg,
===============================
All rights reserved.
Notification of MIT
EXPAT
Permission to use, copy, modify, and
distribute this software for any purpose with
or without fee is hereby granted, provided
80 NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
that the above copyright notice and this
permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”,
WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE
This product includes software developed by
the University of California, Berkeley and its
contributors.
Neither the name of the University nor the
names of its contributors may be used to
endorse or promote products derived from
this software without specific prior written
permission.
WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND
THIS SOFTWARE IS PROVIDED BY THE
REGENTS AND CONTRIBUTORS “AS
IS’’ AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED
WARRANTIESOFMERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE REGENTS OR
CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR
NONINFRINGEMENT OF THIRD
PARTY RIGHTS. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE
OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE. Except as contained in
this notice, the name of a copyright holder
shall not be used in advertising or otherwise
to promote the sale, use or other dealings in
this Software without prior written
CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
The Institute of Electrical and Electronics
Engineers and the American National
Standards Committee X3, on Information
Processing Systems have given us
permission to reprint portions of their
documentation.
authorization of the copyright holder.
===============================
klibc and jemalloc
All of the documentation and software
included in the 4.4BSD and 4.4BSD-Lite
Releases is copyrighted by The Regents of
the University of California.
Copyright 1979, 1980, 1983, 1986, 1988,
1989, 1991, 1992, 1993, 1994 The Regents
of the University of California.
All rights reserved.
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met:
Redistributions of source code must retain
the above copyright notice, this list of
conditions and the following disclaimer.
Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following
disclaimerinthe documentation and/or other
materials provided with the distribution.
All advertising materials mentioning
features or use of this software must display
the following acknowledgement:
In the following statement, the phrase “this
text’’ refers
to portions of the system documentation.
Portions of this text are reprinted and
reproduced in electronic form in the second
BSD Networking Software Release, from
IEEE Std 1003.1-1988, IEEE Standard
Portable Operating System Interface for
Computer Environments (POSIX),
copyright C 1988 by the Institute of
Electrical and Electronics Engineers, Inc. In
the event of any discrepancy between these
versions and the original IEEE Standard, the
NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT 81
Download from Www.Somanuals.com. All Manuals Search And Download.
original IEEE Standard is the referee
document.
In the following statement, the phrase “This
material’’ refers to portions of the system
documentation.
BUT NOT LIMITED TO THE
WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD
PARTY RIGHTS. IN NO EVENT SHALL
THE COPYRIGHT HOLDER OR
HOLDERS INCLUDED IN THIS NOTICE
BE LIABLE FOR ANY CLAIM, OR ANY
SPECIAL INDIRECT OR
CONSEQUENTIAL DAMAGES, OR ANY
DAMAGES WHATSOEVER RESULTING
FROM LOSS OF USE, DATA OR
PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER
TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE
OR PERFORMANCE OF THIS
This material is reproduced with permission
from American National Standards
Committee X3, on Information Processing
Systems. Computer and Business
Equipment Manufacturers Association
(CBEMA), 311 First St., NW, Suite 500,
Washington, DC
20001-2178. The developmental work of
Programming Language C was completed
by the X3J11 Technical Committee.
The views and conclusions contained in the
software and documentation are those of the
authors and should not be interpreted as
representing official policies, either
expressed or implied, of the Regents of the
University of California.
SOFTWARE.
Except as contained in this notice, the name
of a copyright holder shall not be used in
advertising or otherwise to promote the sale,
use or other dealings in this Software
without prior written authorization of the
copyright holder.
--------------------------------------------
All trademarks and registered trademarks
mentioned herein are the property of their
respective owners.
===============================
Big5 Font(DynaComware)
The DynaFont used on the screen display are
solely develop by DynaComware.
===============================
icu(libic)
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION
NOTICE
===============================
dhcpd
Copyright (c) 1995-2012 International
Business Machines Corporation and others
All rights reserved.
Copyright (c) 2004-2011 by Internet
Systems
Consortium, Inc. (“ISC”)
Copyright (c) 1995-2003 by Internet
Software Consortium
Permission is hereby granted, free of charge,
to any person obtaining a copy of this
software and associated documentation files
(the “Software”), to deal in the Software
without restriction, including without
limitation the rights to use, copy, modify,
merge, publish, distribute, and/or sell copies
of the Software, and to permit persons to
whom the Software is furnished to do so,
provided that the above copyright notice(s)
and this permission notice appear in all
copies of the Software and that both the
above copyright notice(s) and this
permission notice appear in supporting
documentation.
Permission to use, copy, modify, and
distribute this software for any purpose with
or without fee is hereby granted, provided
that the above copyright notice and this
permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”
AND ISC DISCLAIMS ALL
WARRANTIES WITH REGARD TO THIS
SOFTWARE INCLUDING ALL IMPLIED
WARRANTIESOF MERCHANTABILITY
AND FITNESS. IN NO EVENT SHALL
ISC BE LIABLE FOR ANY SPECIAL,
DIRECT, INDIRECT, OR
THE SOFTWARE IS PROVIDED “AS IS”,
WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING
CONSEQUENTIAL DAMAGES OR ANY
DAMAGES WHATSOEVER RESULTING
FROM LOSS OF USE, DATA OR
82 NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER
TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE
OR PERFORMANCE OF THIS
SOFTWARE.
Internet Systems Consortium, Inc.
950 Charter Street
Redwood City, CA 94063
DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
===============================
==============
Portions of Libevent are based on works by
others, also made available by them under
the three-clause BSD license above. The
copyright notices are available in the
corresponding source files; the license is as
above.
libevent
Libevent is available for use under the
following license, commonly known as the
3-clause (or “modified”) BSD license:
==============
Here’s a list:
Copyright (c) 2000-2007 Niels Provos
Copyright (c) 2007-2010 Niels Provos and
Nick Mathewson
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met:
1. Redistributions of source code must retain
the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following
disclaimerinthe documentation and/or other
materials provided with the distribution.
3. The name of the author may not be used
to endorse or promote products derived from
this software without specific prior written
permission.
log.c:
Copyright (c) 2000 Dug Song
Copyright (c) 1993 The Regents of the
University of California.
strlcpy.c:
Copyright (c) 1998 Todd C. Miller
win32select.c:
Copyright (c) 2003 Michael A. Davis
evport.c:
Copyright (c) 2007 Sun Microsystems
ht-internal.h:
Copyright (c) 2002 Christopher Clark
minheap-internal.h:
Copyright (c) 2006 Maxim Yegorushkin
==============
The arc4module is available under the
following, sometimes called the
“OpenBSD” license:
THIS SOFTWARE IS PROVIDED BY THE
AUTHOR “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES,
Copyright (c) 1996, David Mazieres
INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE
DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR BE
LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE,
Copyright (c) 2008, Damien Miller
Permission to use, copy, modify, and
distribute this software for any purpose with
or without fee is hereby granted, provided
that the above copyright notice and this
permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”
AND THE AUTHOR DISCLAIMS ALL
WARRANTIES WITH REGARD TO THIS
SOFTWARE INCLUDING ALL IMPLIED
NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT 83
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTIES OFMERCHANTABILITY
AND FITNESS. IN NO EVENT SHALL
THE AUTHOR BE LIABLE FOR ANY
SPECIAL, DIRECT, INDIRECT, OR
CONSEQUENTIAL DAMAGES OR ANY
DAMAGES WHATSOEVER RESULTING
FROM LOSS OF USE, DATA OR
SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
===============================
ppp
Copyrights:
***********
PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER
TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE
OR PERFORMANCE OF THIS
SOFTWARE.
===============================
All of the code can be freely used and
redistributed. The individual source files
each have their own copyright and
permission notice.
Pppd, pppstats and pppdump are under
BSD-style notices. Some of the pppd plugins
are GPL’d. Chat is public domain.
===============================
boost
ntp
Boost Software License - Version 1.0 -
August 17th, 2003
Copyright (c) University of Delaware 1992-
2012.
Permission to use, copy, modify, and
Permission is hereby granted, free of charge,
to any person or organization obtaining a
copy of the software and accompanying
documentation covered by this license (the
“Software”) to use, reproduce, display,
distribute, execute, and transmit the
Software, and to prepare derivative works of
the Software, and to permit third-parties to
whom the Software is furnished to do so, all
subject to the following:
The copyright notices in the Software and
this entire statement, including the above
license grant, this restriction and the
following disclaimer, must be included in all
copies of the Software, in whole or in part,
and all derivative works of the Software,
unless such copies or derivative works are
solely in the form of machine-executable
object code generated by a source language
processor.
distribute this software and its
documentation for any purpose with or
without fee is hereby granted, provided that
the above copyright notice appears in all
copies and that both the copyright notice and
this permission notice appear in supporting
documentation, and that the name University
of Delaware not be used in advertising or
publicity pertaining to distribution of the
software without specific, written prior
permission. The University of Delaware
makes no representations about the
suitability this software for any purpose. It is
provided “as is” without express or implied
warranty.
===============================
libcap
THE SOFTWARE IS PROVIDED “AS IS”,
WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE
Unless otherwise *explicitly* stated, the
following text describes the licensed
conditions under which the contents of this
libcap release may be used and distributed:
Redistribution and use in source and binary
forms of libcap, with or without
modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain
any existing copyright notice, and this entire
permission notice in its entirety, including
the disclaimer of warranties.
WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE AND
NON-INFRINGEMENT. IN NO EVENT
SHALLTHECOPYRIGHTHOLDERS OR
ANYONE DISTRIBUTING THE
SOFTWARE BE LIABLE FOR ANY
DAMAGES OR OTHER LIABILITY,
WHETHER IN CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF
OR IN CONNECTION WITH THE
2. Redistributions in binary form must
reproduce all prior and current copyright
notices, this list of conditions, and the
84 NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
following disclaimer in the documentation
and/or other materials provided with the
distribution.
3. The name of any author may not be used
to endorse or promote products derived from
this software without their specific prior
written permission.
ALTERNATIVELY, this product may be
distributed under the terms of the GNU
General Public License, in which case the
provisions of the GNU GPL are required
INSTEAD OF the above restrictions. (This
clause is necessary due to a potential conflict
between the GNU GPL and the restrictions
contained in a BSD-style copyright.)
THIS SOFTWARE IS PROVIDED “AS IS’’
AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED
WARRANTIESOF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE AUTHOR(S) BE
LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
NOTICES AND LICENSES FOR SOFTWARE USED IN THIS PRODUCT 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
T
N
U
P
Picture Position
W
Preset mode
X
Projection distance and lens shift
Trademark Information
• “PlayStation” is a registered trademark
of Sony Computer Entertainment Inc.
• The terms HDMI and HDMI High-
Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in
the United States and other countries.
• “Blu-ray” and “Blu-ray Disc” are
trademarks of Blu-ray Disc Association.
........................................................................
This projector supports DeepColor,
R
S
x.v.Color, LipSync, computer input signal,
3D signal and 4K signal of HDMI standards.
It also supports HDCP.
Index 87
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2013 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|