Sony Projector KP 43T70 User Manual

3-866-565-13(1)

Color Rear Video Projector

Operating Instructions

KP-43T70

KP-46C70

KP-48S70

KP-48S72

KP-53S70

KP-53N74

KP-61S70

Download from Www.Somanuals.com. All Manuals Search And Download.

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance w ith the instructions, may cause harmful

interference w ith radio communications. How ever,

there is no guarantee that interference w ill not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, w hich can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the

follow ing measures:

CAUTION

WARNING

When using TV games, computers and similar products

w ith your projection TV, or view ing a TV station w hose

logo alw ays stays on the screen, keep the brightness

and contrast functions at low settings. If a fixed (non-

moving) pattern such as a station logo is left on the

screen for long periods of time, especially at a high

brightness or contrast setting, the image can be

permanently imprinted onto the screen. These types of

imprints are not covered by your w arranty because

they are the result of misuse.

To prevent fire or shock

hazard, do not expose the TV

to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

•

Reorient or relocate the receiving antennas.

No t e o n Ca p t io n Visio n

Increase the separation betw een the equipment and

receiver.

ATTENTION

This television receiver provides display of television

closed captioning in accordance w ith §15.119 of the

FCC rules.

RISQUE DE CHOC ELECTRIQUE,

NE PAS OUVRIR

•

Connect the equipment into an outlet on a circuit

different from that to w hich the receiver is

connected.

PRECAUCION

No t e o n co n ve rg e n ce a d ju st m e n t

Before you use your projection TV, make sure to adjust

convergence. For details, see page 15.

Consult the dealer or an experienced radio/TV

technician for help.

RIESGO DE CHOQUE ELECTRICO

NO ADRIR

NO ABRIR

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

No t e t o CATV syst e m in st a lle r

(

)

DO NOT REMOVE COVER OR BACK .

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be

connected to the grounding system of the building, as

close to the point of cable entry as practical.

NO USER-SERVICEABLE PARTS INSIDE.

This document is for the remote control RM-Y906

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

MODELS: KP-43T70, KP-46C70, KP-48S70, KP-48S72,

KP-53S70, KP-53N74, KP-61S70

This symbol is intended to alert the user to

the presence of uninsulated “dangerous

voltage” w ithin the product’s enclosure that

may be of sufficient magnitude to constitute

a risk of electric shock to persons.

Please keep this notice w ith the instruction manual.

Use of this television receiver for other than private

view ing of programs broadcast on UHF or VHF or

transmitted by cable companies for the use of the

general public may require authorization from the

broadcaster/cable company and/or program ow ner.

As an ENERGY STAR Partner,

Sony Corporation has

determined that this product

meets the ENERGY STAR

This symbol is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

guidelines for energy efficiency.

NOTIFICATION

This equipment has been tested and found to comply

w ith the limits for a Class B digital device pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This

ATTENTION

CAUTION

Pour prévenir les chocs électriques, ne pas utiliser cette

fiche polarisée avec un prolongateur, une prise de

courant ou une autre sortie de courant, sauf si les

lames peuvent être inserées à fond sans en laisser

aucune partie à decouvert.

To prevent electric shock, do not use this polarized AC

plug w ith an extension cord, receptacle or other

outlet unless the blades can be fully inserted to

prevent blade exposure.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

Ge t t in g t o kn o w t h e b u t t o n s o n t h e

re m o t e co n t ro l

POWER

(pages 16, 44, 45)

MUTING

In the instructions that follow, we will

refer to the buttons on your remote control.

Keep this flap unfolded and use this page

for reference.

(page 16)

FUNCTION

(pages 16, 44, 45)

MUTING

DVD/

VTR

SAT/

POWER

Names of the buttons on the remote control are

presented in different colors to represent the

available functions.

CABLE

SYSTEM OFF

(page 18)

FUNCTION

PIP operation

buttons

SYSTEM

OFF

DVD/VTR SAT/CABLE

VCR/DVD/MDP

operation buttons

(page 44)

TV/VTR

FREEZE

SWAP

PIP

(page 19)

Button color

POSITION AUDIO ACTIVE

TV/VIDEO

(pages 17, 19)

Transparent .... Press to select the component

you want to control; e.g. VTR

(VCR)/ MDP/ DVD Player,

SAT (satellite receiver)/

CABLE, or projection TV.

Green ............... Buttons relevant to power

operations, like turning the

projection TV, SAT/ CABLE, or

VTR (VCR)/ MDP/ DVD Player

on or off

SLEEP

ANT

TV/VIDEO

SLEEP (page 18)

PICTURE MODE (pages 16, 22)

CC (page 18)

PICTURE

MODE

MTS/SAP DISPLAY

ANT (page 20)

DISPLAY

(page 17)

0 – 9 buttons

MTS/SAP

(pages 18, 23)

(page 16)

JUMP

ENTER

JUMP (page 17)

ENTER (page 16)

INDEX

GUIDE

(pages 18, 23)/

INDEX (for SAT, page 45)

GUIDE (page 45)

V/v/B/b and

RESET

Label color

White ............... TV/ VTR (VCR)/ MDP/ DVD

Player/ SAT (satellite

receiver)/ CABLE operation

buttons

Yellow .............. PIP operation buttons

Blue .................. SAT operation buttons

Green ............... S-Link operation buttons

Pink .................. DVD Player operation buttons

buttons

RESET

VOL

(page 21)

(pages 19, 22, 23)

MENU (page 21)

CH +/– (page 16)

VOL +/– (page 16)

CODE SET

(pages 43, 45)

For a detailed explanation of most buttons, see

“Watching the TV” on page 16.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Connecting a DTV (digital television)

receiver ............................................... 9

Connecting a camcorder ....................... 9

Connecting two VCRs for tape

editing ............................................... 10

Connecting a DVD Player .................. 11

Connecting a DVD Player with

Adjusting Your SET UP (menus)... 21

Learning Menu Selection .......................... 21

Using the Video Menu ......................... 22

Using the Audio Menu ........................ 23

Using the Timer Menu ........................ 25

Welcome! ........................................ 1

Using This Manual .......................... 1

Precautions ...................................... 2

Installing and Connecting the

Projection TV....................... 3

Using the Channel Set Up Menu ...... 26

component video output

Setting and Selecting Favorite Channel.. 28

Using the Set Up Menu ...................... 30

Using the Parental Control Feature ......... 32

connectors ........................................ 11

Connecting an audio system ............. 12

Connecting a Sony SAVA series

Carrying Your Projection TV ...................... 3

Installing the Projection TV ........................ 3

Connector Types .......................................... 4

Making Connections ................................... 4

speaker system ................................ 13

Activating the Parental Control

Feature .............................................. 32

Selecting a Custom Rating

in U.S.A............................................. 34

Selecting a Custom Rating

Basic Set Up ................................... 14

Connecting directly to a cable or an

antenna ............................................... 4

Cable or antenna .................................... 5

Cable and antenna ................................. 5

Connecting a cable box ......................... 5

Cable box and cable .............................. 5

Connecting a cable TV system/

Using the Remote Control ........................ 14

Setting Up the Projection TV

Automatically ................................... 14

in Canada ......................................... 37

Changing the Password ..................... 38

What the Ratings Mean ............................ 39

Adjusting the Convergence Automatically

(FLASH FOCUS) .............................. 15

Ratings in U.S.A................................... 39

Ratings in Canada ............................... 41

antenna to a VCR .............................. 6

Connecting a VCR and projection TV

to a cable box ..................................... 6

Connecting a satellite receiver (SAT) .. 7

Connecting a satellite receiver (SAT)

and a VCR .......................................... 8

Using Your New Projection TV .... 16

Watching the TV ........................................ 16

Watching Two Programs at One Time

— PIP ................................................. 19

Download from Www.Somanuals.com. All Manuals Search And Download.

Using This Manual

Welcome!

We recommend that you carefully review

the contents of the following four sections in

the order provided to ensure that you fully

understand the operation of your new

projection TV.

Thank you for purchasing the Sony Color

Rear Video Projection TV.

Operating Video Equipment ........... 43

Setting the Manufacturer's Code ................ 43

This manual is for models KP-43T70, KP-

46C70, KP-48S70, KP-48S72, KP-53S70, KP-

53N74 and KP-61S70.

Operating a Cable Box or Satellite

Receiver (SAT) ...................... 45

1 Installing and Connecting the Projection

Model KP-53S70 is used for illustration

purposes.

Setting the Manufacturer's Code ................ 45

This section guides you through your

initial set up. It shows you how to install

your projection TV, to connect your new

components and to connect to the

antenna and cable.

The features you will enjoy include:

Troubleshooting .............................. 46

Specifications ................................... 48

Index .............................................. 49

•

FLASH FOCUS, allowing you to adjust

convergence automatically.

2 Basic Set Up

This section teaches you the basic skills

needed to operate your new projection

TV, including Auto Set Up. It shows you

how to operate the remote control’s

special functions.

•

Parental Control, enabling you to block

programs that you feel are unsuitable for

your children.

•

Picture-in-Picture (PIP), allowing you to

view another TV channel, video or cable

image as a window picture.

3 Using Your New Projection TV

This section shows you how to begin

using your new projection TV. It shows

you how to use your remote control’s

features.

Favorite Channel, allowing you to

view and choose from eight of your

favorite channels

Ow ner’s Record

The model and serial numbers are located at the rear of

the projection TV, below the Sony logo, on the sticker,

and also on the TV box (w hite label). Record these

numbers in the spaces provided below . Refer to them

w henever you call upon your Sony dealer regarding this

product.

4 Adjusting Your Set Up (menus)

This section teaches you how to access

on-screen menus and adjust your

projection TV’s settings.

•

Y/ P^B/ PR inputs for DVD Player and DTV

receiver connections.

Three AUDIO/ VIDEO/ S VIDEO inputs.

Instructions in this manual are written for the remote

control. Similar controls may be found on the projection

TV console.

Model No.

Serial No.

Download from Www.Somanuals.com. All Manuals Search And Download.

Precautions

Installing and Connecting the Projection TV (continued)

Sa fe t y

In st a llin g

No t e o n cle a n in g

•

Operate the projection TV only on 120 V

AC.

•

To prevent internal heat buildup, do not

block the ventilation openings.

Clean the cabinet of the projection TV with a

dry soft cloth. To remove dust from the

screen, wipe it gently with a soft cloth.

Stubborn stains may be removed with a cloth

slightly dampened with solution of mild

soap and warm water. Never use strong

solvents such as thinner or benzine for

cleaning.

•

The plug is designed, for safety purposes,

to fit into the wall outlet only one way. If

you are unable to insert the plug fully

into the outlet, contact your dealer.

Do not install the projection TV in a hot

or humid place, or in a place subject to

excessive dust or mechanical vibration.

•

Avoid operating the projection TV at

temperatures below 5° C (41° F).

•

If any liquid or solid object should fall

inside the cabinet, unplug the projection

TV immediately and have it checked by

qualified service personnel before

operating it further.

If the projection TV is transported

directly from a cold to a warm location,

or if the room temperature changes

suddenly, the picture may be blurred or

show poor color. In this case, please wait

a few hours to let the moisture evaporate

before turning on the projection TV.

If the picture becomes dark after using the

projection TV for a long period of time, it

may be necessary to clean the inside of the

projection TV. Consult qualified service

personnel.

If you will not be using the projection TV

for several days, disconnect the power by

pulling the plug itself. Never pull on the

cord.

•

To obtain the best picture, do not expose

the screen to direct illumination or direct

sunlight. It is recommended to use spot

lighting directed down from the ceiling

or to cover the windows that face the

screen with opaque drapery. It is

For details concerning safety precautions, see the

supplied leaflet “IMPORTANT SAFEGUARDS.”

desirable to install the projection TV in a

room where the floor and walls are not of

a reflective material.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing and Connecting the Projection TV

Re co m m e n d e d vie w in g a re a

(Ve rt ica l)

Ca rryin g Yo u r Pro je ct io n TV

In st a llin g t h e Pro je ct io n TV

Carrying the projection TV requires three or

more people.

Re co m m e n d e d vie w in g a re a

(Ho rizo n t a l)

min. 2.4m (approx. 8 ft.)

min. 2.1m (approx. 7 ft.)

min. 1.8m (approx. 6 ft.)

Fo r KP-46C70/48S70/48S72/53S70/

53N74/61S70

61"

min. 1.5m (approx. 5 ft.)

46", 48"

53"

The projection TV has been equipped with

casters for easy movement on a hard surface.

Please move your projection TV using the

casters.

43"

60°

20°

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing and Connecting the Projection TV (continued)

CONTROL S ca b le

Ma kin g Co n n e ct io n s

Co n n e ct o r Typ e s

Sony cable for CONTROL S connection. This

feature is exclusive to Sony products and

allow greater control of all Sony equipment.

You may find it necessary to use some of the

following connector types during set up.

Co n n e ct in g d ire ct ly t o a ca b le o r

a n a n t e n n a

Co a xia l ca b le

Standard TV cable and antenna cable

The connection you choose will depend on

the cable found in your home. Newer homes

will be equipped with standard coaxial cable

(see A); older homes will probably have 300-

ohm twin lead cable (see B); still other

homes may contain both (see C).

Push into connection.

Plug Type

Ab o u t t h e CONTROL S OUT ja ck

Push into connection.

Screw-on Type

To control other Sony equipment with the

projection TV’s remote control, connect the

CONTROL S IN jack of the equipment to the

CONTROL S OUT jack on the projection TV

with the CONTROL S cable.

Screw into connection.

Use 75-ohm coaxial cable for improved

picture quality (see A).

S Vid e o ca b le

High quality video cable for enhanced

picture quality

(Rear of

projection TV)

VHF/UHF

75-ohm

coaxial cable

(Rear of projection TV)

• VHF only

Align guides and

push into connection.

AUX

• VHF/UHF

• Cable

CONVERTER

Au d io /Vid e o ca b le

VIDEO 1

VIDEO 3

Push into connection.

VHF/UHF

OUT

(Rear of

projection TV)

VHF/UHF

VIDEO

MONITOR AUDIO

(VAR/FIX)

CONTROL S

OUT

Video - Yellow

Audio (Left) - White

Audio (Right) - Red

VIDEO

300-ohm tw in

lead cable

• VHF only

(MONO)

AUDIO

CONTROL

OUT

• UHF only

COMPONENT

Some DVD Players and DTV Receivers are

equipped with the following three video

connectors.

• VHF/UHF

Antenna connector

Y - Green

P^B(CB, Cb or B–Y) - Blue

PR (CR, Cr or R–Y) - Red

Download from Www.Somanuals.com. All Manuals Search And Download.

(Rear of projection TV)

AUX

Ca b le b o x a n d ca b le

75-ohm coaxial cable

Coaxial cable

(Rear of

projection TV)

VHF/UHF

Some pay cable TV systems use scrambled or

encoded signals requiring a cable box* only for

certain channels (e.g. HBO, SHOWTIME, etc.)

• VHF

and

TO CONVERTER

(No connection “TO

CONVERTER” in this case)

VHF/UHF

*Cable box

Antenna cable

(Rear of projection TV)

EAC-66 U/V mixer

(not supplied)

AUX

• UHF

Select Cable or ANT mode by pressing ANT

on the remote control.

Scrambled

300-ohm tw in lead cable

TO CONVERTER

channels

Ca b le o r a n t e n n a

Co n n e ct in g a ca b le b o x

75-ohm coaxial cable

(not supplied)

(Signal)

VHF/UHF

This is the simplest connection. Connection is

made directly from the cable or antenna to

the projection TV.

Some pay cable TV systems use scrambled or

encoded signals that require a cable box* to

view all channels.

CATV cable

(unscrambled channels)

(Rear of projection TV)

Also, set “Cable” to “On” in the Channel Set

Up menu (page 27).

VHF/UHF

Coaxial cable

For this set up, you can switch between

scrambled channels (through your cable

box), and normal (CATV) channels by

pressing ANT on your remote control.

(Rear of projection TV)

VHF/UHF

Coaxial cable

Ca b le a n d a n t e n n a

You may find it convenient to use the

following set up if your cable provider does

not feature local channels that you are able to

receive using an antenna.

No t e s:

•

You may be able to program your Sony

remote control to operate your cable box.

(see “Operating a Cable Box or Satellite

Receiver (SAT)” on page 45)

OUT

*Cable box

•

During PIP or Favorite Channel viewing,

the AUX input can only be viewed in the

main picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing and Connecting the Projection TV (continued)

Disconnect all pow er sources before making any connections.

(Rear of projection TV)

Co n n e ct in g a ca b le TV syst e m /

a n t e n n a t o a VCR

AUX

1 Attach the coaxial cable from the

incoming cable connection or antenna to

VHF/ UHF IN on the VCR.

CONVERTER

Coaxial cable

VIDEO 1

VIDEO 3

VHF/UHF

OUT

VIDEO

MONITOR AUDIO

(VAR/FIX)

2 Using a coaxial cable, connect VHF/ UHF

OUT on the VCR to VHF/ UHF on the

projection TV.

S VIDEO

VCR

AUDIO

VIDEO

LINE

VHF/UHF

OUT

(MONO)

AUDIO

LINE

OUT

Cable/

Antenna

3 Using AUDIO and S VIDEO* cables,

connect AUDIO and S VIDEO OUT on the

VCR to AUDIO and S VIDEO IN on the

projection TV (White-AUDIO Left, Red-

AUDIO Right**).

COMPONENT

VIDEO

VMC-810S/820S

(not supplied)

S VIDEO

AUDIO-L

AUDIO-R

YC-15V/30V

(not supplied)

(Rear of projection TV)

Co n n e ct in g a VCR a n d p ro je ct io n

TV t o a ca b le b o x

Coaxial cable

AUX

1 Connect the single (input) jack of the

splitter to the incoming cable connection,

and connect the other two (output) jacks

(using the coaxial cable) to IN on the cable

box and VHF/ UHF on the projection TV.

Cable/

Antenna

CONVERTER

Splitter (not supplied)

VIDEO 1

VIDEO 3

VHF/UHF

OUT

VIDEO

MONITOR AUDIO

(VAR/FIX)

VIDEO

AUDIO

VIDEO

VCR

LINE

VIDEO

VHF/UHF

OUT

2 Using a coaxial cable, connect OUT on the

(MONO)

LINE

OUT

AUDIO

cable box to VHF/ UHF IN on the VCR.

COMPONENT

3 Using AUDIO and S VIDEO* cables,

connect AUDIO and S VIDEO OUT on the

VCR to AUDIO and S VIDEO IN on the

projection TV (White-AUDIO Left, Red-

OUT

VIDEO

AUDIO-L

AUDIO-R

VMC-810S/820S

(not supplied)

S VIDEO

Cable box

YC-15V/30V

(not supplied)

AUDIO Right**).

Download from Www.Somanuals.com. All Manuals Search And Download.

Disconnect all pow er sources before making any connections.

No t e :

To view scrambled channels through the

•

cable box, select the video input which the

cable box is connected to by pressing TV/

VIDEO.

* If your VCR is not equipped with S VIDEO, use a

VIDEO cable (yellow) instead of the S VIDEO

cable.

** If you are connecting a monaural VCR, connect

only the single audio output to the left (MONO)

input on the projection TV.

(Rear of projection TV)

Co n n e ct in g a sa t e llit e re ce ive r

(SAT)

Cable/

Antenna

Satellite antenna

cable

AUX

1 Connect the cable from the satellite

CONVERTER

antenna to the satellite receiver.

VIDEO 3

VIDEO 1

2 Attach the coaxial cable from the incoming

cable connection or antenna to VHF/ UHF

on the projection TV.

VHF/UHF

OUT

VIDEO

MONITOR AUDIO

(VAR/FIX)

SAT

VIDEO

SATELLITE IN

LINE OUT

VHF/UHF

AUDIO

VIDEO

VIDEO IN

(MONO)

OUT

AUDIO

3 Using AUDIO and S VIDEO cables,

connect AUDIO and S VIDEO OUT on the

satellite receiver to AUDIO and S VIDEO

IN on the projection TV (White-AUDIO

Left, Red-AUDIO Right).

COMPONENT

S VIDEO

AUDIO-L

AUDIO-R

RK-74A (not supplied)

No t e :

•

To view input from the satellite receiver,

select the video input which the satellite

receiver is connected to by pressing TV/

VIDEO on the remote control.

YC-15V/30V (not supplied)

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing and Connecting the Projection TV (continued)

Disconnect all pow er sources before making any connections.

Co n n e ct in g a sa t e llit e re ce ive r

(SAT) a n d a VCR

1 Connect the cable from the satellite

(Rear of projection TV)

antenna to the satellite receiver.

Coaxial cable

AUX

2 Attach the coaxial cable from the

incoming cable connection or antenna to

VHF/ UHF IN on the VCR.

SAT

SATELLITE IN

CONVERTER

VHF/UHF

AUDIO

VIDEO

OUT

VIDEO 3

LINE

OUT

VIDEO 1

VHF/UHF

3 Using a coaxial cable, connect VHF/ UHF

OUT on the VCR to VHF/ UHF on the

projection TV.

OUT

VIDEO

MONITOR AUDIO

(VAR/FIX)

VIDEO

Satellite

antenna

cable

VMC-810S/

820S (not

supplied)

(MONO)

AUDIO

4 Using AUDIO and S VIDEO* cables,

connect AUDIO and S VIDEO OUT on the

satellite receiver to AUDIO and S VIDEO

IN on the VCR.

YC-15V/

30V

(not

supplied)

COMPONENT

VIDEO

AUDIO-L

AUDIO-R

S VIDEO

5 Using AUDIO and S VIDEO* cables,

connect AUDIO and S VIDEO OUT on the

VCR to AUDIO and S VIDEO IN on the

projection TV (White-AUDIO Left, Red-

AUDIO Right).

S VIDEO

AUDIO

VIDEO

LINE

VHF/UHF

OUT

LINE

OUT

VCR

VMC-810S/820S (not supplied)

* If your VCR is not equipped with S VIDEO, use a

VIDEO cable (yellow) instead of the S VIDEO

cable.

Cable/

Antenna

No t e :

YC-15V/30V (not supplied)

•

To view input from the satellite receiver or

VCR, select the video input which your

satellite receiver or VCR is connected to

by pressing TV/ VIDEO on the remote

control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Disconnect all pow er sources before making any connections.

Co n n e ct in g a DTV (d ig it a l t e le visio n ) re ce ive r

Before connecting, be sure to read the

Operating Instructions of the DTV receiver.

VMC-10HG (not supplied)

AUX

1 Attach the coaxial cable from the roof

antenna to VHF/ UHF on the DTV

receiver.

CONVERTER

DTV receiver

2 Using three yellow VIDEO cables,

VIDEO 1

VIDEO 3

VHF/UHF

VIDEO

OUT

connect Y, PB and PR of VIDEO OUT on

the DTV receiver to Y, P^Band PR of

VIDEO 3 IN on the projection TV.

VIDEO

MONITOR AUDIO

(VAR/FIX)

VHF/UHF

(DTV)

VIDEO

DOLBY DIGITAL

AUDIO OUT

(OPTICAL)

(MONO)

DOWN

3 Using an AUDIO cable, connect AUDIO

OUT on the DTV receiver to AUDIO of

VIDEO 3 IN on the projection TV (White-

AUDIO Left, Red-AUDIO Right).

AUDIO

CONVERTER

ON/OFF

OUT

CONTROL S

AUDIO OUT

VIDEO OUT

COMPONENT

(Rear of projection TV)

AUDIO-R

AUDIO-L

4 Set the DOWN CONVERTER ON/ OFF

switch on the DTV receiver to ON.

RK-74A (not supplied)

Roof antenna

Co n n e ct in g a ca m co rd e r

Use this connection to view a picture directly

from your camcorder.

YC-15V/30V (not supplied)

1 Using AUDIO and S VIDEO* cables,

connect AUDIO and S VIDEO OUT on

the camcorder to AUDIO and S VIDEO

IN inside the drop-down panel on the

front of the projection TV (White-AUDIO

Left, Red-AUDIO Right**).

Audio/

video

outputs

VMC-810S/820S

(not supplied)

S VIDEO

OUT

VIDEO

2 Press VIDEO 2 to select the video inputs

S VIDEO

AUDIO-L

AUDIO-R

from a camcorder.

* If your camcorder is not equipped with S

VIDEO, use a VIDEO cable (yellow) instead of

the S VIDEO cable.

AUDIO

VIDEO

(MONO)

VIDEO 2 INPUT

** If you are connecting a monaural camcorder,

connect only the single audio output to the left

(MONO) input on the projection TV.

(Front of projection TV)

Download from Www.Somanuals.com. All Manuals Search And Download.

Camcorder

Installing and Connecting the Projection TV (continued)

Disconnect all pow er sources before making any connections.

Co n n e ct in g t w o VCRs fo r t a p e

e d it in g

(Rear of projection TV)

By connecting a second VCR to MONITOR

OUT, you can record a program being played

by the primary VCR to the second VCR or

perform tape editing and dubbing.

AUX

CONVERTER

1 Connect the VCR intended for playback

using the connection instructions on page

6 of this manual.

VIDEO 1

VIDEO 3

VHF/UHF

OUT

VIDEO

MONITOR AUDIO

(VAR/FIX)

VIDEO

VCR (for playback)

VCR (for recording)

(MONO)

2 Using an AUDIO/ VIDEO cable, connect

AUDIO and VIDEO IN on the VCR

intended for recording to AUDIO and

VIDEO OUT of MONITOR OUT on the

projection TV.

AUDIO

VIDEO

OUT

AUDIO

VIDEO

OUT

LINE

OUT

LINE

COMPONENT

VIDEO

AUDIO-L

AUDIO-R

VIDEO

AUDIO-L

AUDIO-R

VMC-810S/820S

(not supplied)

VMC-810S/820S

(not supplied)

No t e s:

•

Do not change the input signal while

editing through MONITOR OUT.

(Rear of projectionTV)

•

When connecting a single VCR to the

projection TV: if VCR LINE OUT is

connected to VIDEO IN on the projection

TV, do not connect MONITOR OUT on

the projection TV to the VCR LINE

INPUT (see right). Doing so will cause

program interference and other viewing

problems.

VIDEO IN

MONITOR

OUT

Indicates direction

of signal

VCR

LINE

OUT

Download from Www.Somanuals.com. All Manuals Search And Download.

Disconnect all pow er sources before making any connections.

(Rear of projection TV)

Co n n e ct in g a DVD Pla ye r (Up p e r

illu st ra t io n )

AUX

Using an AUDIO and S VIDEO cables,

connect AUDIO and S VIDEO IN on the

projection TV to AUDIO and S VIDEO OUT

on the DVD Player (White-AUDIO Left, Red-

AUDIO Right).

CONVERTER

DVD

S VIDEO

VIDEO 3

LINE OUT

VIDEO OUT

S-LINK

DIGITAL OUT

OPTICAL COAXIAL

VIDEO 1

R–AUDIO 1–L VIDEO

VHF/UHF

OUT

VIDEO

MONITOR AUDIO

(VAR/FIX)

VIDEO

Co n n e ct in g a DVD Pla ye r w it h

co m p o n e n t vid e o o u t p u t

co n n e ct o rs (Lo w e r illu st ra t io n )

1 Using an AUDIO cable, connect AUDIO of

LINE OUT on the DVD Player to AUDIO of

VIDEO 3 IN on the projection TV (White-

AUDIO Left, Red-AUDIO Right).

(MONO)

Audio/S video

outputs

(MONO)

AUDIO

AUDIO-R

AUDIO-L

COMPONENT

Connect the DVD Player

directly to the projection TV.

Connecting the DVD Player

through other video

equipment w ill cause

unw anted picture noise.

RK-74A (not supplied)

YC-15V/30V (not supplied)

2 Using three yellow VIDEO cables, connect

Y, P^B, and PR of COMPONENT VIDEO

OUT on the DVD Player to Y, P^B, and PR of

VIDEO 3 IN on the projection TV.

(Rear of

projection

TV)

RK-74A (not supplied)

AUX

AUDIO-L

AUDIO-R

CONVERTER

No t e s:

•

Since the high quality pictures on a DVD

disc contain a lot of information, picture

noise may appear. In this case, adjust “Noise

Reduction” in the Video menu. (see “Noise

Reduction” on page 22)

VIDEO 1

VIDEO 3

VHF/UHF

OUT

VIDEO

MONITOR AUDIO

(VAR/FIX)

DVD

VIDEO

LINE OUT

VIDEO OUT

COMPONENT VIDEO OUT

B-Y R-Y

S-LINK

DIGITAL OUT

OPTICAL COAXIAL

(MONO)

R–AUDIO 1–L VIDEO

(MONO)

AUDIO

•

Some DVD Player terminals may be labeled

differently. If so, connect as follows:

Connect Y (green) to Y.

COMPONENT

VMC-10HG

Connect P^B(blue) to CB, Cb or B-Y.

(not supplied)

Connect P^R(red) to CR, Cr or R-Y.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing and Connecting the Projection TV (continued)

Disconnect all pow er sources before making any connections.

Co n n e ct in g a n a u d io syst e m

For more dynamic sound, connect an audio

(Rear of projection TV)

system to the projection TV.

Stereo amplifier

1 Using an AUDIO cable, connect AUDIO

(VAR/ FIX) OUT on the projection TV to

one of the unused Line inputs (e.g. Tape-

2, AUX1, etc.) on the stereo.

VIDEO 3

VIDEO 1

OUT

HRD

VIDEO

MONITOR AUDIO

(VAR/FIX)

2 Set the stereo to the chosen Line input

and use the Audio menu to set the audio

output and switch the TV’s speakers off.

(see “Audio Out” and “Speaker” on page

24)

AUDIO-L

(w hite)

VIDEO

(MONO)

AUDIO

CONTROL

OUT

Line inputs

COMPONENT

AUDIO-R

(red)

RK-74A

(not supplied)

No t e :

•

You can adjust VOLUME, “Bass,”

“Treble,” “Balance,” “MTS/ SAP” and

“Effect” with the supplied remote control.

The control items except VOLUME can be

adjusted only when “Audio Out” is set to

“Variable” in the Audio menu. (see

“Audio Out” on page 24)

Download from Www.Somanuals.com. All Manuals Search And Download.

Disconnect all pow er sources before making any connections.

Co n n e ct in g a So n y SAVA se rie s

sp e a ke r syst e m

(Rear of projection TV)

Use this connection to control the speaker’s

Dolby* Pro Logic surround system and

super woofer mode with the remote control.

(see “SAVA SP Control” on page 24)

SAVA series

speaker system

VIDEO 3

VIDEO 1

OUT

1 Using the AUDIO cable supplied with the

speaker to AUDIO (VAR/ FIX) OUT on

the projection TV.

AUDIO-L

(w hite)

VIDEO

MONITOR AUDIO

(VAR/FIX)

VIDEO

1 IN L

1 IN R

(MONO)

AUDIO

CONTROL

OUT

2 Using the CONTROL S cable, connect

CONTROL S IN on the speaker to

COMPONENT

AUDIO-R (red)

RK-G34, etc. (not supplied)

CONTROL S

OUT

Audio cord supplied

w ith the speakers

CONTROL S OUT on the projection TV.

CONTROL S IN

* Manufactured under license from Dolby

Laboratories Licensing Corporation.

Additionally licensed under Canadian patent

number 1,037,877. “Dolby,” the double-D

symbol a and “Pro Logic” are trademarks of

Dolby Laboratories Licensing Corporation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Set Up

Using the buttons on the front panel and

inside the drop-down panel on the projection

TV:

Usin g t h e Re m o t e Co n t ro l

Se t t in g Up t h e Pro je ct io n TV

Au t o m a t ica lly

The AUTO SET UP feature will allow you to

set the on-screen language and set all

receivable channels.

In se rt in g t h e b a t t e rie s

Front panel:

Insert two size AA (R6) batteries (supplied)

by matching the + and – on the batteries to

the diagram inside the remote control’s

battery compartment.

FLASH FOCUS TV/VIDEO

–

VOLUME

–

CHANNEL

POWER TIMER/STAND BY

The AUTO SET UP feature does not apply for

installations that use a cable box for all channel

selection.

Inside the drop-dow n panel:

You can also set up the projection TV manually.

(see “Using the Channel Set Up menu” on pages

26 and 27)

FLASH FOCUS

TV/VIDEO

SET UP MENU

No t e s:

•

Before you perform AUTO SET UP again,

make sure that the input from ANT (not

AUX) is selected by pressing ANT until

“AUX” does not appear next to the

channel number.

1 Press POWER to turn on the projection

No t e s:

TV.

•

Remove the batteries to avoid damage

from possible battery leakage whenever

you anticipate that the remote control

will not be used for an extended period.

POWER

Perform this function during the day, with

the antenna and/ or cable properly

connected, to ensure that all available

channels will be broadcasting and

receivable.

Handle the remote control with care.

Avoid dropping it, getting it wet, or

placing it in direct sunlight, near a heater

or where the humidity is high.

2 Press SET UP inside the drop-down panel.

The AUTO SET UP screen appears.

Your remote control can be programmed to

operate most video equipment.

(see “Operating Video Equipment” on

page 43)

When you perform AUTO SET UP, all the

settings in the Video, and Audio menus

are reset to the factory settings.

E n g l i s h

E s p a ñ o l

[ C H + ]

[ C H – ]

F r a n ç a i s

A u t o S e t U p

[ V O L + ]

[ V O L – ]

SET UP

First please connect

the antenna.

Press SET UP to exit.

[

]

Download from Www.Somanuals.com. All Manuals Search And Download.

“Auto Program” appears and the

projection TV starts scanning and

presetting channels automatically. While

scanning, the received channel will be

displayed on the sub screen. When all the

receivable channels are stored, the lowest

numbered channel is displayed.

3 Press CHANNEL + to select English,

CHANNEL – to select Español or

VOLUME + to select Français.

The screen will change to reflect your

choice.

FLASH FOCUS

E n g l i s h

E s p a ñ o l

F r a n ç a i s

[ C H + ]

[ C H – ]

[ V O L + ]

[ V O L – ]

–

VOLUME

–

CHANNEL

To p e rfo rm AUTO SET UP a g a in

A u t o S e t U p

Press SET UP inside the drop-down panel on

the projection TV and perform steps 3-5 on

pages 14 and 15.

Primero conecte la

antena.

[

]

Oprima SET UP para

salir.

Press FLASH FOCUS.

Press SET UP again to exit.

4 Press VOLUME – to continue.

The cross pattern appears and FLASH

FOCUS begins to work. The adjustment is

completed when the cross pattern becomes

white.

–

VOLUME

C o n t i n u e t o

A u t o P r o g r a m

Ad ju st in g t h e Co n ve rg e n ce

Au t o m a t ica lly (FLASH FOCUS)

The projection tube image appears on the

screen in three layers (red, green and blue). If

they do not converge, the color is poor and

the picture blurs.

Y e s

N o

[ C H + ]

[ C H – ]

5 Press CHANNEL + to preset channels

automatically.

Before you use your projection TV, be sure to

adjust the convergence.

–

CHANNEL

A u t o P r o g r a m

The FLASH FOCUS feature allows you to

adjust the convergence automatically.

No t e :

•

FLASH FOCUS is canceled if you

perform any other function while FLASH

FOCUS is working.

Tips z

•

It is recommended to perform FLASH FOCUS about

30 minutes after the projection TV is first turned on.

•

You can also perform FLASH FOCUS using the Set

Up menu on page 31.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Your New Projection TV

(continued)

Wa t ch in g t h e TV

Many TV features can be accessed directly

through the remote control. The following

chart will explain the function of some

buttons found on your remote control.

Using the White Labeled Buttons for Projection TV Operations

PICTURE MODE

TV (FUNCTION)

TV POWER

Activates the remote control for use with the projection TV.

Press PICTURE MODE repeatedly to directly

choose one of five different video modes that

best suits the program you are watching.

Vivid: Select for enhanced picture contrast and

sharpness.

Turns the projection TV on and off. If a video input indication (e.g., VIDEO 1,

VIDEO 2) appears on the screen, press TV/VIDEO until a channel number

appears.

Use for direct channel selection. Press 0-9 to select a channel (for example,

to select channel 10, press 1 and 0). The channel will change after 2

seconds, or you can press ENTER for immediate selection.

Standard: Select to display a standard

picture for normal viewing environments.

Movie: Select to display a finely detailed

picture for low light environments.

Personal 1, Personal 2: Select to customize

the “Picture Adjustment” of the Video menu

according to your personal preference.

and ENTER

CH +/–

Press to scan through the channels (+ up or – down).

Speed Surf

Press and hold CH + or – to change the channel number rapidly.

Release to display the desired channel.

When you select “Movie,” “Personal 1” and

“Personal 2,” you can also perform the “Picture

Adjustment” (such as “Brightness,” “Color,” etc.)

to suit your taste. For details, see “Mode” on

page 22.

VOL +/–

MUTING

Press to adjust the volume (+ up or – down).

Press to mute the sound. “Muting” will appear on the screen and will dim

three seconds later. To restore sound, press again or press VOL +.

Download from Www.Somanuals.com. All Manuals Search And Download.

REFER TO THE

ILLUSTRATION OF THE

REMOTE CONTROL ON THE

INSIDE FRONT COVER OF

THIS MANUAL AS YOU

REVIEW THIS CHART

Using the White Labeled Buttons for Projection TV Operations

Press repeatedly to scroll through available video inputs:

TV, VIDEO 1, VIDEO 2 and VIDEO 3.

TV/VIDEO

If you select “Skip” as a “Video Label” in the Set Up menu, your projection

TV will skip the video input you selected. (see “Video Label” on page 31)

Press to alternate or jump back and forth between two channels. The

projection TV will jump between the current channel and the last channel

selected using the 0-9 buttons.

JUMP

This is useful when you need to copy down information that appears on the

TV’s screen.

Press to freeze the desired picture. The frozen picture is displayed in the

window picture while viewing the normal picture of the current channel in the

main picture.

FREEZE

(yellow labeled

button)

Normal motion

picture

Frozen picture

Reciipe

flour

sugar

salt

butter

1/2

-1/2

- 1

To change the location of the window picture, press V, v, B or b.

Press FREEZE again to display the normal picture.

Press to display the channel number, current time, channel caption (if set),

and MTS/SAP mode (if SAP is selected). The SAP indication disappears and

the other indications dim three seconds later.

DISPLAY

To turn the display off, press DISPLAY again.

(continued)

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Your New Projection TV (continued)

REFER TO THE

ILLUSTRATION OF THE

REMOTE CONTROL ON THE

INSIDE FRONT COVER OF

THIS MANUAL AS YOU

REVIEW THIS CHART

Using the White Labeled Buttons for Projection TV Operations

Press repeatedly to scroll through available displays:

XDS (Extended Data Service)

Displays a network name, program name, program type, program length,

program description, call letters and time of the show if the broadcaster

offers this service.

Caption Vision

Displayed on the screen if the broadcaster offers this service. (see

“Caption Vision” on page 30)

No display

“Off” appears and the display is canceled.

Press repeatedly until the projection TV displays the approximate time in

minutes (30, 60, or 90) that you want the projection TV to remain on before

shutting off automatically.

SLEEP

Cancel by pressing until “Sleep Off” appears.

Press to change between the VHF/UHF input and the AUX input. (for

detailed connection information, see “Cable and antenna” or “Cable box and

cable” on page 5)

ANT

(AUX input)

Press to scroll through the Multi-channel TV Sound (MTS) options:

Stereo, SAP, Mono and Auto SAP. (see “MTS/SAP” on page 23)

MTS/SAP

Press to select an audio option:

Simulated, Surround, BBE and Effect Off. (see “Effect” on page 23)

Press when you are finished using a VCR and you want to switch to the TV

input. The VCR power will remain on.

TV/VTR

Press to turn off the projection TV and all other Sony equipment.

SYSTEM OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

Wa t ch in g Tw o Pro g ra m s a t On e Tim e — PIP

The Picture-in-Picture (PIP) feature allows

you to view two channels simultaneously,

one in the full size “main” picture and one in

Using the Yellow Labeled Buttons for PIP Operations

Press to display a window picture.

Each time you press this button, the picture size will change

(1/9 n1/16 nno display).

a smaller “window” picture.

PIP

You can move the window picture to any

location on the screen.

To close the window picture, press PIP repeatedly until it disappears.

The symbol “b” or “B”

indicates w hich picture's

TV channel or input

The symbol “≥”

indicates w hich

picture's sound is being

received.

Press POSITION repeatedly to change the location of the window picture

(counterclockwise) around the main picture.

You can also change the location by pressing the V, v, B or b button.

The window picture moves in the direction of the arrow indicated on the

pressed button.

POSITION

source can be changed.

TV channel or input-

source mode for the

main picture* (yellow -

green-colored)

Main

picture

Press to select either the main or window picture in order to change the

TV channel or video source using the white labeled buttons below. The

symbol “b” (or “B”) will appear to indicate which picture’s channel or input

mode can be changed.

TV channel or input-

source mode for the

w indow picture*

(w hite-colored)

ACTIVE

Window

picture

Press repeatedly to scroll through the available video inputs for the

picture on which the symbol “b” (or “B”) is displayed. (see “TV/VIDEO” on

page 17)

TV/VIDEO

* It will dim in about 3 seconds.

(white labeled

button)

Tip z

If you press RESET in PIP mode, the window picture

will move to the bottom right (factory-preset location).

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Your New Projection TV (continued)

REFER TO THE

ILLUSTRATION OF THE

REMOTE CONTROL ON THE

INSIDE FRONT COVER OF

THIS MANUAL AS YOU

REVIEW THIS CHART

Using the Yellow Labeled Buttons for PIP Operations

Press to select the TV channel on which the symbol “b” is

displayed. (for details, see “Watching the TV” on page 16)

Speed Surf

JUMP

1 Press and hold CH + or – to change the channel number rapidly.

2 Release to display the desired channel.

and ENTER

No t e :

(white labeled button)

•

If one of the pictures received through

PIP is snowy, the entire screen may

become unstable. In this case, erase the

snowy channel. (see “Channel Skip/

Add” on page 27)

ANT

Press to change between the VHF/UHF input and the AUX input for the picture on

which the symbol “b” (or “B”) is displayed.

(white labeled

button)

Press to alternate sound between the main picture and the window picture. The

symbol “ ” will appear for a few seconds to indicate which picture’s sound is being

received.

AUDIO

This is useful when you need to copy down information of the main picture.

Press to freeze the desired scene in the main picture. The frozen picture is displayed

in the window picture while viewing the normal picture in the main picture. The

window picture size is automatically changed to 1/9 if it was 1/16.

Press again to resume normal PIP viewing.

FREEZE

Press to switch the audio and video of the main picture and the window picture.

Each time you press SWAP, the picture and sound of the two will be exchanged.

SWAP

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your SET UP (menus)

S e t U p

P a r e n t a l C o n t r o l

C a p t i o n V i s i o n : C C 1

L a n g u a g e :

V i d e o L a b e l

3 Press V or v to highlight the desired

option.

Le a rn in g Me n u Se le ct io n

E n g l i s h

F l a s h F o c u s :

N o

Use the MENU button to access a menu and

buttons to alter the

settings. Use the following example to learn

S e t U p

P a r e n t a l C o n t r o l

C a p t i o n V i s i o n : C C 1

L a n g u a g e :

V i d e o L a b e l

use the V, v, B, b and

E n g l i s h

Exit

F l a s h F o c u s :

N o

Move

Select

how to modify settings.

1 Press the MENU button.

Some adjustment menus may require

further operations. For details, see each

menu option.

Exit

Move

Select

The main menu appears.

V i d e o

M o d e :

P i c t u r e A d j u s t m e n t

4 Press

V i v i d

To return to the previous screen (except

for the slider adjustment menus), choose

T r i n i t o n e :

N o i s e R e d u c t i o n : O f f

H i g h

Options for your selection (Pop-up menu

or Adjusting menu) will be displayed.

“

” at the bottom of the menu and press

or B.

Move

Select

Exit

6 Once you have completed all menu

corrections, press MENU to exit the menu

2 Press V or v to highlight the desired menu

Pop-up menu

Adjusting menu

screens.

and press

to activate it.

S e t U p

V i d e o L a b e l

P a r e n t a l C o n t r o l

C a p t i o n V i s i o n : C C 1

V I D E O 1 :

V I D E O 2 :

V I D E O 3 :

V I D E O 1

V I D E O 2

V I D E O 3

S e t U p

P a r e n t a l C o n t r o l

C a p t i o n V i s i o n :

S e t N e w

L a n g u a g e :

E n g l i s h

V i d e o L a b e l E s p a ñ o l

F l a s h F o c u sF:r a n ç aNi so

L a n g u a g e :

V i d e o L a b e l

F l a s h F o c u s :

P a s s w o r d

To e xit fro m t h e m e n u s a t a n y

t im e

N o

Move

Select

Exit

Move

Select

Move

Select

Exit

Press MENU.

5 Press V or v to make your selection and

press to activate it.

The previous screen will reappear.

You may also press b to activate your

selection.

Tip z

You can also use the MENU,

and

buttons

inside the front drop-down panel of the projection TV

for the menu selection.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your SET UP (menus) (continued)

You can choose one of five different video modes that best suits the program you

Mode

Customized

picture viewing

Usin g t h e Vid e o Me n u

are watching. You can also perform the “Picture Adjustment” (such as

“Brightness,” “Color,” etc.) for “Movie,” “Personal 1” or “Personal 2” to suit your

taste.

Vivid: Select for enhanced picture contrast and sharpness.

Standard: Select to display a standard picture for normal viewing

environments.

V i d e o

M o d e :

V i v i d

P i c t u r e A d j u s t m e n t

T r i n i t o n e :

H i g h

N o i s e R e d u c t i o n : O f f

Movie: Select to display a finely detailed picture for low light environments.

Personal 1, Personal 2: Select to customize the “Picture Adjustment” of the

Video menu according to your personal preference.

Press PICTURE MODE on the remote control for direct selection of a “Mode”

setting.

Move

Select

Exit

For detailed information on using the remote

control to modify menu settings, refer to

“Learning Menu Selection” on page 21.

First select “Movie,” “Personal 1” or “Personal 2” from “Mode,” then highlight the

Picture

Adjustment

Picture adjustment

desired option using the V or v button and press

to display the adjusting

To se le ct t h e Vid e o

Display / Highlight

m e n u :

slider of the selected option.

P e r s o n a l

P i c t u r e

Picture: Adjust slider right (up) to increase picture

contrast; left (down) to decrease it.

Brightness: Adjust slider right (up) to brighten the

picture; left (down) to darken it.

/ Select

B r i g h t n e s s

C o l o r

H u e

S h a r p n e s s

Color: Adjust slider right (up) to increase color

intensity; left (down) to decrease it.

Move

Select

Exit

Hue: Adjust slider right (up) to increase the green

tones; left (down) to increase the red tones.

Sharpness: Adjust slider right (up) to sharpen the

picture; left (down) to soften it.

To re st o re t h e fa ct o ry se t t in g s

Press RESET on the remote control while the

Video menu is selected. To restore each

“Mode” to the factory setting, press RESET

after selecting the mode to be reset.

High: Select to give the white colors a blueish tint.

Medium: Select to give the white colors a neutral tint.

NTSC Standard: Select to give the white colors a reddish tint.

Trinitone

White intensity

adjustment

Select On to reduce picture noise.

Select Off to cancel the feature.

Noise Reduction

Noise reduction

“Noise Reduction” can be set separately from the “Mode” settings of the Video

menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g t h e Au d io Me n u

Treble

Sound adjustment

Adjust slider right (up) to increase high pitched sounds.

Adjust slider left (down) to decrease high pitched sounds.

A u d i o

T r e b l e

B a s s

B a l a n c e

M T S / S A P :

A u t o V o l u m e :

E f f e c t :

S p e a k e r :

Bass

Sound adjustment

Adjust slider right (up) to increase low pitched sounds.

Adjust slider left (down) to decrease low pitched sounds.

Sliders

}

S t e r e o

O n

S u r r o u n d

O n

Balance

Sound adjustment

Adjust slider right (up) to emphasize right speaker volume.

Adjust slider left (down) to emphasize left speaker volume.

A u d i o O u t : V a r i a b l e

S A V A S P C o n t r o l

Move

Select

Exit

MTS/SAP

When the sound is intermittent due to poor reception conditions, select “Stereo”

or “SAP.”

Stereo: Select for stereo reception when viewing a program broadcast in stereo.

SAP: Select to listen to a bilingual broadcast. (non-SAP programs will be muted

when this feature is selected)

Enjoy stereo,

bilingual and mono

programs.

For detailed information on using the remote

control to modify menu settings, refer to

“Learning Menu Selection” on page 21.

Mono: Select for mono reception. (use to reduce noise during stereo broadcasts)

Auto SAP: Select to listen to SAP when a SAP program is broadcast and return

To se le ct t h e Au d io

m e n u :

to stereo reception automatically for non-SAP programs.

MTS/SAP

Quick MTS access: Press

on the remote control to cycle through the

Display / Highlight

/ Select

“MTS/SAP” options as follows: Stereo n SAP n Mono n Auto SAP.

Auto Volume

Adjust the sound

level.

On: Sound output coming from TV speakers have the volume level equalized for all

channel audio inputs when broadcasts have different sound transmission levels.

Off: Sound output coming from the TV speakers varies according to the received

channel.

To re st o re t h e fa ct o ry se t t in g s

Press RESET on the remote control while the

Audio menu is selected.

Effect

“Effect” can only be set when “Speaker” is set to “On” or “Off.”

Simulated: Adds a surround-like effect to mono programs.

Surround: Simulates sound with the atmosphere of a movie theater or a concert

hall for stereo programs.

BBE*: Centers the sound intensity to the front, creating an effect as if you were

seated in front of an orchestra.

Customizes

surround sound

effects based on the

program’s audio

type.

* The BBE is manufactured by Sony Corporation

under license from BBE Sound, Inc. It is covered

by U.S. Patent No. 4,638,258 and No. 4,482,866.

The word “BBE” and the BBE symbol are the

trademarks of BBE Sound, Inc.

Off: Normal stereo or mono reception.

Quick Effect access: Press

on the remote control to cycle through the

“Effect” options as follows: Simulated n Surround n BBE n Effect Off.

(continued) 23

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your SET UP (menus) (continued)

On: Select to listen to the sound from the projection TV speakers alone.

Speaker

Off: Select to turn off the projection TV speakers and listen to the

Custom selection

of audio output

source

projection TV’s sound only through an external audio system’s speakers.

SAVA SP: Select to turn off the projection TV speakers and listen to the projection

TV’s sound only through the Sony SAVA series speaker system. You can

adjust volume, muting, “Surround Mode,” and “Super Woofer Mode” with the

projection TV’s remote control. (see “SAVA SP Control” below)

“Audio Out” can only be set when “Speaker” is set to “Off.”

Fixed: Sound output is held at a fixed level through the audio system.

Use the AV receiver’s remote control to adjust the volume.

Variable: Sound output varies according to the TV settings.

Useful when you want to use your remote control to control the output of a

separate audio system.

Audio Out

Easy control of

volume adjustment

“SAVA SP Control” can only be set when Sony SAVA speaker system is

connected to the AUDIO (VAR/FIX) OUT connectors and “Speaker” is set to

“SAVA SP.” (see “Speaker” above)

You can also adjust the SAVA speaker’s volume using VOL +/– of the projection

TV’s remote control.

SAVA SP Control

Controls Sony

SAVA speaker’s

mode.

Surround Mode: Select to activate the SAVA Speaker’s surround mode.

Super Woofer Mode: Select to activate the SAVA Speaker’s super woofer mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Spring: Select Yes to compensate for Daylight Saving Time.

The current time automatically moves ahead one hour.

Fall: Select No at the end of Daylight Saving Time.

The current time moves back one hour.

Usin g t h e Tim e r Me n u

Daylight Savings

Automatically

T i m e r

D a y l i g h t S a v i n g s : Y e s

C u r r e n t T i m e

adjusts the time.

O n

O f f T i m e r

C u r r e n t T i m e

– – – – AM

1 Press

(Sun-Sat) is displayed, and press

2 Press V or v until the current hour (1-12) and

AM/PM is displayed, and press

3 Press V or v until the current minute (00-59) is

displayed, and press

, then press V or v until the current day

Current Time

Necessary for the

Timer.

– – –

: -

A M

Exit

Move

Select

Move

Select

Exit

After setting the clock you can use the timer

to turn the projection TV on and off.

The clock has now started. Press MENU to exit.

For detailed information on using the remote

control to modify menu settings, refer to

“Learning Menu Selection” on page 21.

O n / O f f T i m e r

– – – – – –

1 Press V or v until the desired day or range of days

(Every Sun-Sat, Every Mon-Fri, Sunday, Monday, ...

Saturday, Every Sunday, ... Every Saturday) is

On/Off Timer

Wake up or

– – : – – AM

– – –

–

scheduled viewing.

displayed, and press

2 Press V or v until the time (hours and minutes) that

you want the projection TV to remain on is displayed,

To se le ct t h e Tim e r

Display / Highlight

m e n u :

S u n 1 2 : 0 0 A M

Move Select

Exit

/ Select

and then press

3 Press V or v to set the time duration (maximum of 6 hours) and press

4 Press V or v to select the desired channel and press

The timer is now set. The TIMER/STAND BY indicator on your projection TV

will be lit.

Tip z

Press MENU to exit. To cancel your timer setting, press RESET while in the On/

Off Timer window. Performing Auto Program will erase all Timer settings.

Set daylight saving time before setting the clock. Any

loss of power will cause these settings to be erased.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your SET UP (menus) (continued)

Usin g t h e Ch a n n e l Se t Up

C h a n n e l C a p t i o n

C h a n n e l :

Channel

Caption

Easy recognition

of the channel

you are watching

You can add a caption for up to 32 channels of VHF/

UHF input.

With the Channel Caption window open:

Me n u

– – –

– – – – –

C a p t i o n :

C h a n n e l S e t U p

C h a n n e l C a p t i o n

F a v o r i t e C h a n n e l : A u t o

C h a n n e l S k i p / A d d

A u t o P r o g r a m

1 Press

channel. You can view the channel that is selected

with the Channel Caption menu in the sub screen.

and then press V or v to select the desired

Move

Select

Exit

C a b l e :

O n

2 Press

3 Press V or v to display the first letter or number of the

caption and press

to select it.

Move

Select

Exit

Repeat until up to five digits are selected.

4 Press

For detailed information on using the remote

control to modify menu settings, refer to

“Learning Menu Selection” on page 21.

To erase a caption, press RESET.

Favorite

Channel

User’s favorite

channels

The Favorite Channel feature enables easy access to the eight channels that you

preset (or the last channel that you were watching).

(for details on how to set up this feature, see “Setting and Selecting Favorite

Channel” on page 28)

To se le ct t h e Ch a n n e l Se t Up

m e n u :

Display / Highlight

/ Select

Download from Www.Somanuals.com. All Manuals Search And Download.

Channel

Skip/Add

Skips unnecessary

channels.

After AUTO SET UP, you can erase unnecessary

channels from the channel preset memory.

With the Channel Skip/Add window open:

1 Press V or v to select the desired channel. You can

view the channel that is selected with the Channel

Skip/Add menu in the sub screen. You can also use

CH +/– or 0–9 and ENTER buttons.

C h a n n e l S k i p / A d d

1 : S k i p

2 : S k i p

3 :

4 :

5 :

6 :

7 :

8 :

9 :

A d d

Select a channel

Move Select

Exit

2 Press

3 Press V or v to select Skip, and press

The selected channel will be erased.

If you want to re-enter the skipped channel, follow the steps above and select

Add.

Select Yes to signal the projection TV to automatically program all receivable

channels. When all the receivable channels are stored, the lowest numbered

channel is displayed.

Auto Program

Automatic

channel presetting

Select No to cancel Auto Program.

Select On if your projection TV is connected to a cable system.

Cable

Select Off if your projection TV is connected to an antenna.

Cable system

setting

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your SET UP (menus) (continued)

2 Press V or v to select “Manual” and press

4 Press V or v to select a channel and press

Se t t in g a n d Se le ct in g

Fa vo rit e Ch a n n e l

The Favorite Channel feature of your

projection TV enables easy access to the eight

channels that you preset (or the last channel

that you were watching).

The Favorite Channel menu will appear.

If you set Channel Caption names (e.g.

CNN, HBO), they will also be displayed.

(see “Channel Caption” on page 26)

You have now selected a favorite channel.

F a v o r i t e C h a n n e l

1 .

2 .

3 .

4 .

5 .

6 .

7 .

C N N

1 0 S P T N

2 0

3 0

4 0

5 0

8 . 1 0 0

F a v o r i t e C h a n n e l

Your Favorite Channel options can be set

automatically or manually.

1 .

2 .

3 .

4 .

5 .

6 .

7 .

C N N

Select a channel

1 0 S P T N

2 0

3 0

4 0

5 0

The factory setting for “Favorite Channel” is

“Auto.”

5 Use V and v to program other favorite

8 . 1 0 0

channels. (Follow steps 3 and 4.)

Select a position

When “Favorite Channel” is set to “Auto,”

the last eight channels selected with the 0–9

buttons will be set as Favorite Channel

options. If you want to input your own

selections as Favorite Channel settings, set to

“Manual.”

6 Press MENU when you have finished.

Your favorite channels are now ready for

use.

3 Press V or v to select a position (1–8), and

press

F a v o r i t e C h a n n e l

1 .

2 .

3 .

4 .

5 .

6 .

7 .

C N N

Se t t in g Fa vo rit e Ch a n n e l m a n u a lly

1 0 S P T N

2 0

3 0

4 0

5 0

1 Select “Favorite Channel” from the

Channel Set Up menu. (see page 26)

8 . 1 0 0

C h a n n e l S e t U p

Select a channel

C h a n n e l C a p t i o n

F a v o r i t e C h a n n e : A u t o

Manual

C h a n n e l S k i p / A d d

A u t o P r o g r a m

C a b l e :

O n

Move

Select

Exit

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g Fa vo rit e Ch a n n e l

3 Press

to select the channel.

Ch a n g in g Fa vo rit e Ch a n n e l ch o ice s

You have the option of returning to the

Favorite Channel screen to adjust any of your

favorite channel choices.

The selected channel will be displayed for

normal viewing.

You can use the Favorite Channel feature to

directly select the channel you want to watch.

1 Press

once.

Simply proceed as described in “Setting

Favorite Channel manually” (skip step 2 if

“Manual” is already selected).

The favorite channel menu and a window

picture will be superimposed over the

current channel. The window picture

displays the channel selected from the

menu.

When you reach step 3, select the position

you want to change and press

v to select a new channel.

. Press V or

To cancel the favorite channel menu before

selecting a channel, press V or v to select

“Exit” at the bottom of the menu and press

F a v o r i t e C h a n n e l

C N N

1 .

2 .

3 .

4 .

5 .

6 .

7 .

1 0 S P T N

2 0

3 0

4 0

5 0

1 0 0

E x i t

1 0 S P T N

2 0

3 0

4 0

5 0

8 . 1 0 0

Select a channel

2 Press V or v to select the channel that you

Press MENU when you are done.

wish to view from the menu.

The picture of the selected channel will be

displayed in the window picture.

C N N

1 0 S P T N

2 0

3 0

4 0

5 0

1 0 0

E x i t

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your SET UP (menus) (continued)

Allows you to block TV programs that you feel are unsuitable for your

children.

(see “Using the Parental Control Feature” on page 32 for details)

Usin g t h e Se t Up Me n u

Parental

Control

Blocks programs

unsuitable for

children.

S e t U p

P a r e n t a l C o n t r o l

C a p t i o n V i s i o n : C C 1

L a n g u a g e :

E n g l i s h

V i d e o L a b e l

F l a s h F o c u s :

N o

S e t U p

P a r e n t a l C o n t r o l

C a p t i o n V i s i o n :

L a n g u a g e :

V i d e o L a b e l

F l a s h F o c u s :

Some programs are broadcast with Caption Vision.

Caption Vision

Television closed

caption display

C C 1

C C 2

C C 3

To display “Caption Vision,” select CC 1, CC 2,

CC 3, CC 4, TEXT1, TEXT2, TEXT3 or TEXT4 from

the menu. Then press the CC button until “Caption

Vision” is displayed.

Exit

Move

Select

C C 4

N o

T e x t 1

T e x t 2

T e x t 3

T e x t 4

For detailed information on using the remote

control to modify menu settings, refer to

“Learning Menu Selection” on page 21.

Move

Select

Exit

CC 1, CC 2, CC 3 or CC 4 displays a printed

version of the dialogue or sound effects of a

program. (The mode should be set to CC 1 for most

programs.) TEXT1, TEXT2, TEXT3, or TEXT4

displays network/station information presented using

either half or the whole screen.

To se le ct t h e Se t Up

m e n u :

Display / Highlight

/ Select

Notes:

• Poor reception of TV programs can cause errors in Caption Vision and XDS.

Captions may appear with a white box or other errors instead of the intended

text.

• XDS, Caption Vision, and the status display cannot be used at the same time.

Select from available languages (English, Español or Français) to display all

Language

menus in your language of choice.

Preferred language

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Label

Easy recognition of

connected

This feature allows you to label each input mode so

that you can easily identify the connected equipment

(e.g. you can label VIDEO 1 IN as VHS).

V i d e o L a b e l

V I D E O 1 :

V I D E O 2 :

V I D E O 1

V I D E O 2

V I D E O 3

V I D E O 3 :

equipment

(e.g. SAT, VHS,

etc.)

Exit

Move

Select

With the Video Label window open:

V i d e o L a b e l

1 Press V or v to select the input mode you want to

V I D E O 1 :

V I D E O 2 :

V I D E O 3 :

V i d e o 1

V H S

8 m m

B e t a

L D

label and press

S A T

D V D

A V R E C E I V E R

D T V

2 Press V or v to select the label and press

S k i p

Move

Select

Exit

Video Label Options:

VIDEO 1: VIDEO 1, VHS, 8mm, Beta, LD, SAT, DVD, AV RECEIVER, DTV,

Skip

VIDEO 2/3: VIDEO 2/VIDEO 3, VHS, 8mm, Beta, LD, SAT, DVD, DTV, Skip

If you select “Skip,” your projection TV will skip this connection when you scan

through video sources using the TV/VIDEO button.

Select Yes and press

adjustment is completed, the cross pattern on the screen becomes white. (for

details, see page 15)

to start Flash Focus adjustment. When the

Flash Focus

Automatic

convergence

adjustment

Select No to cancel Flash Focus.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your SET UP (menus) (continued)

1 Select “Parental Control” from the Set Up

4 Make sure that “Country ”is highlighted,

and press

Usin g t h e Pa re n t a l Co n t ro l

Fe a t u re

The TV programs and movies shown on TV

are given a rating signal based on the

following rating systems.

menu. (see page 30)

S e t U p

P a r e n t a l C o n t r o l

C a p t i o n V i s i o n :

P a r e n t a l C o n t r o l

C o u n t r y : U . S . A .

U . S . A .

C a n a d a

S e t N e w

L a n g u a g e :

P a r e n t a l L o c k :

R a t i n g : C h i l d

C h a n g e P a s s w o r d

Off

P a s s w o r d

V i d e o L a b e l

F l a s h F o c u s :

N o

In U.S.A.: U.S. Television Parental

Guidelines to rate television programs (U.S.

TV ratings), and Motion Picture Association

of America (MPAA) Guidelines to rate

movies including those shown on TV (movie

ratings)

In Canada: Canadian English Language

ratings to rate television programs in English,

and Canadian French Language ratings to

rate those in French.

Move

Select

Exit

Move

Select

Exit

2 Enter a four digit password* using the 0–

5 Press V or v to select your country (U.S.A.

or Canada), and press

9 buttons.

S e t U p

P a r e n t a l C o n t r o l

C a p t i o n V i s i o n :

C o n f i r m

L a n g u a g e :

V i d e o L a b e l

F l a s h F o c u s :

P a r e n t a l C o n t r o l

C o u n t r y :

P a r e n t a l L o c k :

P a s s w o r d

U . S . A .

Off

C h i l d

C h a n g e P a s s w o r d

N o

R a t i n g :

Move

Select

Exit

To block programs you feel are unsuitable for

your children, you need to set the TV for the

desired rating systems. Sony’s predetermined

ratings are also available.

See pages 39 to 41 for a description of the

ratings.

The Parental Control feature of the TV

functions by receiving the rating signal from

your local broadcasting station or cable

service provider.

Move

Select

Exit

* Do not enter “4357” corresponding to “HELP”

on a phone number pad. (see page 39)

6 Press V or v to select “Parental Lock,”

and press

3 To confirm the password, re-enter the

same password with the 0–9 buttons.

P a r e n t a l C o n t r o l

C o u n t r y :

P a r e n t a l L o c k :

R a t i n g :

Your password is stored and the Parental

Control menu automatically appears.

If you want to change the password, see

U . S . A .

OOfnf

C h iOl dff

C h a n g e P a s s w o r d

page 38.

P a r e n t a l C o n t r o l

C o u n t r y :

P a r e n t a l L o c k :

R a t i n g : C h i l d

C h a n g e P a s s w o r d

U . S . A .

Move

Select

Exit

Off

Act iva t in g t h e Pa re n t a l Co n t ro l

Fe a t u re

First, set a password, then select your desired

rating from Sony’s predetermined ratings.

Move

Select

Exit

Download from Www.Somanuals.com. All Manuals Search And Download.

To d e a ct iva t e t h e Pa re n t a l Co n t ro l

fe a t u re

3 Press V or v to select “Parental Lock,”

and press

7 Press V or v to select “On,” and press

P a r e n t a l C o n t r o l

If you set “Parental Lock” in the Parental

Control menu to “Off,” the Parental Control

feature will not work and you can view all

TV programs and movies shown on TV.

C o u n t r y :

U . S . A .

C o u n t r y :

P a r e n t a l L o c k :

R a t i n g : C h i l d

C h a n g e P a s s w o r d

U . S . A .

P a r e n t a l L o c k :

OOfnf

C h iOl dff

C h a n g e P a s s w o r d

R a t i n g :

Move

Select

Exit

1 Select “Parental Control” from the Set Up

Move

Select

Exit

menu. (see page 30)

4 Press V or v to select “Off,” and press

8 Press V or v to select “Rating,” and press

S e t U p

P a r e n t a l C o n t r o l

C a p t i o n V i s i o n :

L a n g u a g e :

V i d e o L a b e l

F l a s h F o c u s :

C C 1

N o

P a s s w o r d

P a r e n t a l C o n t r o l

C o u n t r y :

P a r e n t a l L o c k :

R a t i n g : C h i l d

C h a n g e P a s s w o r d

U . S . A .

C o u n t r y :

U . S . A .

Off

P a r e n t a l L o c k :

R a t i n g :

C h i l d

C h a n g e P a s s w oYr do u t h

Y o u n g A d u l t

C u s t o m

Move

Select

Exit

A g e s u p t o

Move Select

2 Enter your four digit password using the

Move

Select

Exit

0-9 buttons.

9 Press V or v to select a desired rating

The Parental Control menu appears.

5 Press MENU to exit the menu.

(“Child,” “Youth” and “Young Adult”),

P a r e n t a l C o n t r o l

C o u n t r y :

P a r e n t a l L o c k :

R a t i n g : C h i l d

C h a n g e P a s s w o r d

U . S . A .

and press

If you want to select the ratings from

“Custom,” go to step 4 of “Selecting a

Custom Rating in U.S.A.” on page 34 or

“Selecting a Custom Rating in Canada”

on page 37, according to your “Country”

setting.

Move

Select

Exit

10 Press MENU to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your SET UP (menus) (continued)

3 Press V or v to select “Rating,” and press

To u n lo ck t h e Pa re n t a l Co n t ro l fe a t u re

t e m p o ra rily

Se le ct in g a Cu st o m Ra t in g in

U.S.A.

When you select a Parental Control program,

no sound or picture except for a channel

P a r e n t a l C o n t r o l

If you want to select the ratings to be blocked

from “Custom” once you have activated the

Parental Control feature (page 33), follow the

procedure below.

C o u n t r y :

U . S . A .

P a r e n t a l L o c k :

R a t i n g :

C h a n g e P a s s w oYr do u t h

Y o u n g A d u l t

C u s t o m

C h i l d

number will appear. The

indicator is

displayed. To view the program, follow the

steps below.

A g e s u p t o

Move Select

Exit

For a detailed description of each rating, see

“What the Ratings Mean” on pages 39 to 41.

1 Press ENTER to display the “Password”

screen.

4 Press V or v to select “Custom,” and

press

1 Select “Parental Control” from the Set Up

2 Enter your password using the 0–9

buttons. Parental Control will be canceled

(“Parental Lock” set to “Off”) until you

turn your projection TV off.

menu. (see page 30)

S e t U p

P a r e n t a l C o n t r o l

C u s t o m R a t i n g

C a p t i o n V i s i o n :

C C 1

N o

P a s s w o r d

T V R a t i n g

M o v i e R a t i n g

L a n g u a g e :

V i d e o L a b e l

F l a s h F o c u s :

U n r a t e d :

V i e w A l l

Move

Select

Exit

S e l e c t c a t e g o r y

Move

Select

Exit

2 Enter your four digit password using the

0–9 buttons.

The Parental Control menu appears.

Make sure that “Country” is set to

“U.S.A.”

P a r e n t a l C o n t r o l

C o u n t r y :

P a r e n t a l L o c k :

R a t i n g : C h i l d

C h a n g e P a s s w o r d

U . S . A .

Move

Select

Exit

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Press V or v to select “ ,” and press

The indicator automatically appears

8 Press B or b to select the extender to be

viewed, and press

First, select a TV rating.

5 Press V or v to select “TV Rating,” and

beside the selected rating and all “higher”

ratings, indicating that the programs that

match the ratings will be blocked.

press

T V R a t i n g

–

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

:FV _

T V R a t i n g

:D – L – S – V –

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

T V R a t i n g

:FV _

L – S – V

–

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

:D _ L _ S _ V _

:FV _

B l o c k c o n t e n t

Move Select

Exit

L _ S _ V _

:D – L – S – V –

S e l e c t r a t i n g

Move

L – S – V

Exit

Select

9 Press V or v to select “–,” and press

S e l e c t c a t e g o r y

Move Select Exit

“–” appears beside the selected extender,

indicating that the programs that match

the extender can be viewed.

6 Press V or v to select the TV rating to be

blocked, and press

Some ratings have additional content

ratings called “extenders.” The extenders

are defined as follows: D (sexually

suggestive Dialog), FV (Fantasy

Violence), L (coarse Language), S (Sexual

situations) and V (Violence). By setting

the extenders, you can define additional

viewing limits. For more details of

extenders, see page 41.

If you select “ ,”

is displayed to

T V R a t i n g

show that the programs that match the

extender will be blocked again.

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

:FV _

:D _ L _ S _ V _

T V R a t i n g

L _ S _ V _

–

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

:FV _

A l l o w r a t i n g

Move Select

Exit

:D – L – S – V _

:D – L – S – V –

L – S – V

All of the extenders included in the

selected ratings will be blocked. If you

wish to allow any of them to be viewed,

go to step 8.

S e l e c t c a t e g o r y

Move Select Exit

(continued)

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your SET UP (menus) (continued)

To b lo ck TV p ro g ra m s a n d /o r m o vie s

fo r w h ich a ra t in g sig n a l is n o t g ive n

(NR a n d N/A)

10 Repeat steps 8 and 9 for other extenders.

13 Press V or v to select the movie rating to

be blocked, and press

All programs that match the ratings you

select and higher, except for the

extenders that were canceled, will be

blocked.

M o v i e R a t i n g

–

For a description of the NR and N/ A ratings,

see page 40.

–

PG–13

NC–17

–

11 After setting of the TV rating is complete,

1 Perform steps 1–4 of “Selecting a Custom

B l o c k r a t i n g

Move Select

press V or v to select “ ,” and press

Rating in U.S.A.” on page 34.

Exit

2 Press V or v to select “Unrated,” and

C u s t o m R a t i n g

T V R a t i n g

M o v i e R a t i n g

press

14 Press V or v to select “ ,” and press

The indicator automatically appears

U n r a t e d :

V i e w A l l

C u s t o m R a t i n g

beside the selected rating and all “higher”

ratings, indicating that the programs that

match the ratings will be blocked.

T V R a t i n g

M o v i e R a t i n g

U n r a t e d :

S e l e c t c a t e g o r y

Move Select Exit

VViieeww A l l

T V

M o v i e

M o v

B o t h

Second, select a movie rating.

12 Press V or v to select “Movie Rating,” and

press

M o v i e R a t i n g

N o b l o c k

Move Select

PG–13

–

Exit

NC–17

–

M o v i e R a t i n g

S e l e c t r a t i n g

Move Select

–

PG–13

NC–17

Exit

15 Press MENU to exit the menu.

S e l e c t r a t i n g

Move Select

Exit

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Press V or v to select “Rating,” and press

3 Press V or v to select the type of

Se le ct in g a Cu st o m Ra t in g in

Ca n a d a

programs to be blocked, and press

C u s t o m R a t i n g

P a r e n t a l C o n t r o l

If you want to select the ratings to be blocked

from “Custom” once you have activated the

Parental Control feature (page 33), follow the

procedure below.

C o u n t r y :

P a r e n t a l L o c k :

R a t i n g :

C h a n g e P a s s w oYr do u t h

Y o u n g A d u l t

C u s t o m

C a n a d a

T V R a t i n g

M o v i e R a t i n g

U n r a t e d :

C h i l d

V i e

V i e w A l l

T VV

MM o v i e

B o t h

B l o c k a l l u n r a t e d

p r o g r a m m i n g

A g e s u p t o

Move Select

Move

Select

Exit

For a detailed description of each rating, see

“What the Ratings Mean” on pages 41 and

42.

Exit

4 Press V or v to select “Custom,” and press

1 Select “Parental Control” from the Set Up

To b lo ck ...

Se le ct ...

menu. (see page 30)

C u s t o m R a t i n g

No program

View All

S e t U p

P a r e n t a l C o n t r o l

E n g l i s h R a t i n g

F r e n c h R a t i n g

U . S . A . R a t i n g

(to view any unrated TV

program and movie)

C a p t i o n V i s i o n :

C C 1

N o

P a s s w o r d

L a n g u a g e :

V i d e o L a b e l

F l a s h F o c u s :

Unrated TV programs

Unrated movies

S e l e c t c a t e g o r y

Move

Select

Exit

Move

Select

Exit

Movie

Both

2 Enter your four digit password using the

Unrated TV programs and

movies

(continued)

0–9 buttons.

The Parental Control menu appears.

Make sure that “Country” is set to

4 Press MENU to exit the menu.

“Canada.”

P a r e n t a l C o n t r o l

C o u n t r y :

P a r e n t a l L o c k :

R a t i n g : C h i l d

C h a n g e P a s s w o r d

C a n a d a

Move

Select

Exit

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your SET UP (menus) (continued)

5 Press V or v to select the rating you want

to block, and press

The selected rating appears.

7 Press V or v to select “ ,” and press

The indicator automatically appears

Ch a n g in g t h e Pa ssw o rd

beside the selected rating and all

“higher” ratings, indicating that the

programs that match the ratings will be

blocked.

1 Select “Parental Control” from the Set Up

menu. (see page 30)

Canadian English Rating

S e t U p

P a r e n t a l C o n t r o l

E n g l i s h R a t i n g

C a p t i o n V i s i o n :

C C 1

N o

P a s s w o r d

C8+

14+

18+

L a n g u a g e :

V i d e o L a b e l

F l a s h F o c u s :

E n g l i s h R a t i n g

C8+

14+

18+

S e l e c t r a t i n g

Move Select

Move

Select

Exit

2 Enter your four digit password using the

0–9 buttons.

S e l e c t r a t i n g

Move Select

Exit

Canadian French Rating U.S. TV Rating

The Parental Control menu appears.

F r e n c h R a t i n g

U . S . A . R a t i n g

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

P a r e n t a l C o n t r o l

Some U.S. TV ratings have additional

content ratings called “extenders,” such

as D, FV, L, S and V. By setting the

8 ans+

13 ans+

16 ans+

18 ans+

:FV _

C o u n t r y :

P a r e n t a l L o c k :

R a t i n g : C h i l d

C h a n g e P a s s w o r d

U . S . A .

:D _ L _ S _ V _

L _ S _ V _

extenders, see steps 7 to 10 of “Selecting a

Custom Rating in U.S.A.” on pages 35

and 36. For more details of extenders, see

page 41.

S e l e c t r a t i n g

Move Select

S e l e c t r a t i n g

Move Select

Exit

Move

Select

Exit

3 Press V or v to select “Change Password,”

and press

6 Press V or v to select the TV rating to be

blocked, and press

All of the extenders included in the

selected ratings will be blocked. If you

wish to allow any of them to be viewed,

go to step 8.

Example: Canadian English Rating

P a r e n t a l C o n t r o l

C o u n t r y :

E n g l i s h R a t i n g

U . S . A

P a r e n t a l L o c k : O n

C8+

14+

18+

R a t i n g :

C h i l d

C h a n g e P a s s w o r d

N e w

8 Press MENU to exit the menu.

_ _ _ _

U s e [ 0 - 9 ] t o e n t e r

n e w f o u r d i g i t

p a s s w o r d

A l l o w r a t i n g

Move Select

Move

Exit

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Enter a new four digit password using

the 0–9 buttons.

If yo u h a ve fo rg o t t e n yo u r p a ssw o rd

Wh a t t h e Ra t in g s Me a n

In step 2 of “Changing the Password” on

page 38, enter the master password “4357”

(corresponding to “HELP” on a phone

number pad). You can then store a new

password.

P a r e n t a l C o n t r o l

C o u n t r y :

P a r e n t a l L o c k : O n

R a t i n g :

C h a n g e P a s s w o r d

C o n f i r m

_ _ _ _

U . S . A

Ra t in g s in U.S.A.

C h i l d

So n y’s p re d e t e rm in e d ra t in g s

These are original ratings that Sony

predetermined according to the viewer’s age.

Each rating allows you to view the certain

programs, as follows.

C o n f i r m p a s s w o r d

Move

Exit

No t e s:

•

If you entered “4357” as your password

the first time, you cannot store a new

password. (see step 2 of “Activating the

Parental Control Feature” on page 32)

5 Enter the password set in step 4 again to

confirm.

See pages 40 and 41 for a description of each

rating.

If you entered it incorrectly, “Password

incorrect” appears.

Child: Suitable for children under the age of

•

When you select a Parental Control

program and the

indicator is

Re-enter the correct password.

Viewable U.S. movie ratings: G, NR, and N/ A

Viewable U.S. TV ratings: TV-Y, TV-G, and

TV-NR

displayed on the screen, you cannot view

that program even if you enter “4357.”

(see “To unlock the Parental Control

feature temporarily” on page 34)

6 Press MENU to exit the menu.

Youth: Suitable for children aged 7 and

older.

Viewable U.S. movie ratings: G, PG, NR, and

N/ A

Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-

G, TV-PG, and TV-NR

Young Adult: Suitable for children aged 13

and older.

Viewable U.S. movie ratings: G, PG, PG-13,

NR, and N/ A

Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-

G, TV-PG, TV-14, and TV-NR

(continued)

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your SET UP (menus) (continued)

TV-Y7 (Directed to Older Children): This

program is designed for children aged 7 and

above. Themes and elements in this program

may include mild fantasy violence or

slapstick violence, or may frighten children

under the age of 7.

U.S. m o vie ra t in g s

NC-17 or X (No One 17 Or Under

Admitted.): This is a film that most parents

would consider not suitable for children

aged 17 and under. There may be violence,

sex, abberrational behavior, drug abuse or

other elements of concern.

U.S. movie ratings are for movies (including

those shown on TV) rated according to the

Motion Picture Association of America

(MPAA) Guidelines.

G (General Audiences—All Ages

Admitted): In G-rated films no strong words

are used, the violence is at a minimum,

nudity and sex scenes are not present, nor is

there any drug use.

TV-G (General Audience): Most parents

would find this program suitable for all ages.

It contains little or no violence, no strong

language and little or no sexual dialog or

situations.

NR (Not Rated): This is a film that a

producer has not rated, intending to have his

film widely released.

N/A (Not Applicable): This is a film that a

producer considers outside the scope of the

MPAA ratings.

PG (Parental Guidance Suggested. Some

Material May Not Be Suitable For

Children): This is a film which may need to

be monitored first by parents.

TV-PG (Parental Guidance Suggested):

This program contains some material that

parents may find unsuitable for younger

children.

No t e :

•

NR and N/ A ratings are shown together

as “Unrated” in the menu.

PG-13 (Parents Strongly Cautioned. Some

Material May Be Inappropriate For

Children Under 13): Parents are alerted to be

very careful about the attendance of their

under-teenage children when viewing.

TV-14 (Parents Strongly Cautioned): This

program contains some material that many

parents would find unsuitable for children

under the age of 14.

U.S. TV ra t in g s

U.S. TV ratings are for TV programs rated

according to the U.S. Television Parental

Guidelines.

TV-MA (Mature Audience Only): This

program is specifically designed to be

viewed by adults and therefore may be

unsuitable for children under the age of 17.

R (Restricted, Under 17 Require

Accompanying Parent Or Adult Guardian):

This film includes hard language, tough

violence, nudity, drug abuse or other

elements of concern.

TV-Y (All Children): This program is

designed for young children aged 2–6 and is

appropriate for all children.

Download from Www.Somanuals.com. All Manuals Search And Download.

Young Adult: Suitable for children aged 14

and older.

Viewable Canadian English Language

ratings: C, G, C8+, PG and 14+

Viewable Canadian French Language

ratings: G, 8 ans+, 13 ans+

TV-NR (Not Rated/Unrated): This is a

program broadcast without any rating, such

as news, news flashes or sports.

Ra t in g s in Ca n a d a

So n y’s p re d e t e rm in e d ra t in g s

No t e :

These are original ratings that Sony

predetermined according to the viewer’s age.

Each rating allows you to view the certain

programs, as follows.

The TV-NR rating is shown as “Unrated” in

the menu.

Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-

G, TV-PG, TV-14, and TV-NR

See the right column and page 42 for a

description of each rating.

Ab o u t t h e e xt e n d e rs o f U.S. TV ra t in g s

Ca n a d ia n En g lish La n g u a g e ra t in g s

TV-Y7, TV-PG, TV-14 and TV-MA ratings

have additional content ratings called

“extenders” to define additional viewing

limits. The extenders are defined as follows:

Child: Suitable for children under the age of

The Canadian English Language Ratings are

for TV programs in English broadcast in

Canada.

Viewable Canadian English Language

ratings: C and G

D (sexually suggestive Dialog): Programs

containing suggestive dialog, or sexual

innuendo

Viewable Canadian French Language

ratings: G

Viewable U.S. TV ratings: TV-Y, TV-G, and

C (Programming intended for children

under age 8): There will be no realistic

scenes of violence or no offensive language,

nudity or sexual content. Careful attention is

paid to themes, which could threaten

TV-NR

FV (Fantasy Violence): Programs containing

cartoon violence occurring in TV-Y7

programs only

Youth: Suitable for children aged 8 and

older.

children’s sense of security and well-being.

Viewable Canadian English Language

ratings: C, G, C8+ and PG

Viewable Canadian French Language

ratings: G and 8 ans+

Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-

G, TV-PG, and TV-NR

C8+ (Programming generally considered

acceptable for children 8 years and over to

watch on their own): Violence will not be

portrayed as the preferred, acceptable, or

only way to resolve conflict; or encourage

children to imitate dangerous acts which

they may see on television. There will be no

profanity, nudity or sexual content.

L (coarse Language): Programs containing

coarse language

S (Sexual situations): Programs containing

sexual content

V (Violence): Programs containing violence

There may be some profanity, violence or

brief nudity in these programs.

(continued)

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your SET UP (menus) (continued)

No t e :

G (General Audience): Will contain very

little violence, either physical or verbal or

emotional. There may by some inoffensive

slang, no profanity and no nudity.

16 ans+ (Programming is not suitable for

children under the age of 16): Contains

frequent scenes of violence or intense

violence.

The E (Exempt) rating is not shown in the

menu.

PG (Parental Guidance): Programming

intended for a general audience but which

may not be suitable for younger children.

Parents may consider some content

inappropriate for unsupervised viewing by

children aged 8 - 13.

18 ans+ (Programming restricted to adults):

Contains constant violence or scenes of

extreme violence.

Ca n a d ia n Fre n ch La n g u a g e ra t in g s

The Canadian French Language Ratings are

for TV programs in French broadcast in

Canada.

E (Exempt): Exempt programming.

No t e :

G (General): Programming intended for

audience of all ages. Contains no violence, or

the violence it contains is minimal or is

depicted appropriately with humor or

caricature or in an unrealistic manner.

The E (Exempt) rating is not shown in the

menu.

14+ (Programming contains themes or

content which may not be suitable for

viewers under the age of 14): Parents are

strongly cautioned to exercise discretion in

permitting viewing by pre-teens and early

teens.

8 ans+ (8+ General - Not recommended for

young children): Programming intended for

a broad audience but contains light or

occasional violence that could disturb young

children. Viewing with an adult is

recommended for young children (under the

age of 8).

18+ (Adult): May contain violence integral

to the development of the plot, character or

theme, intended for adult audiences. May

contain graphic language and explicit

portrayals of nudity and/ or sex.

13 ans+ (Programming may not suitable for

children under the age of 13): Viewing with

an adult is strongly recommended for

children under 13.

E (Exempt): Exempt programming includes:

news, sports documentaries and other

information programming: talk shows,

music videos, and variety programming.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating Video Equipment

Minolta

305, 304

323, 324, 325, 326

325, 338, 321

314, 336, 337

309, 308

VCR m a n u fa ct u re r co d e n u m b e rs

Se t t in g t h e Ma n u fa ct u re r' s

Co d e

Mitsubishi/MGA

Multitech

NEC

Olympic

Optimus

Panasonic

Pentax

Philco

Philips

Pioneer

Quasar

Ma n u fa ct u re r

Co d e

Sony (VHS VCR)

Sony (8mm VCR)

Sony (Beta, ED Beta, VCRs)

Aiwa

301

302

303

You can use the supplied remote control to

operate Sony or non-Sony video equipment

that has an infrared sensor.

327

308, 309, 306, 307

305, 304

338

Admiral (M. Ward)

Audio Dynamic

Bell & Howell (M. Ward)

Broksonic

Canon

Citizen

327

314, 337

330

319, 317

309, 308

332

308, 309

308, 309, 310

308

Press CODE SET, DVD/ VTR (FUNCTION),

and the 0-9 buttons to enter the

manufacturer’s code number (see the

following chart), then press ENTER.

308, 309, 306

304, 305, 308, 309, 311,

329, 312, 313, 310

309, 330, 328, 335, 324, 338

314

RCA/PROSCAN

Craig

Curtis Mathis

Daewoo

DBX

Dimensia

302, 332

304, 338, 309

341, 312, 309

314, 336, 337

304

For example, to operate a Sony 8mm VCR:

Realistic

Sansui

Samsung

Sanyo

Scott

Sharp

Signature 2000 (M. Ward)

Sylvania

Symphonic

SV2000

Tashiro

Tatung

Teac

Technics

Teknica

Toshiba

Wards

FUNCTION

DVD/VTR

ENTER

CODE SET

322, 313, 321

330, 335

312, 313, 321, 335, 323, 324, 325, 326

327, 328

Emerson

Fisher

319, 320, 316, 317, 318, 341

330, 335

If t h e re m o t e co n t ro l d o e sn ’t w o rk

See the tips on page 45.

338, 327

308, 309, 338, 310

Funai

338

•

General Electric

Go Video

Goldstar

Hitachi

Instant Replay

JC Penney

JVC

Kenwood

LXI (Sears)

Magnavox

Marantz

329, 304, 309

340, 339, 322

332

338

332

306, 304, 305, 338

309, 308

314, 336, 337

314, 336, 338, 337

309, 308

309, 305, 304, 330, 314, 336, 337

314, 336, 337

314, 336, 332, 337

332, 305, 330, 335, 338

308, 309, 310

314, 336, 337

332

338

312, 311

327, 328, 335, 331, 332

330, 314, 336, 337

331

Yamaha

Zenith

Marta

Memorex

309, 335

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating Video Equipment (continued)

MDP m a n u fa ct u re r co d e n u m b e rs

To search the picture Press ) or 0 during

forward or backward playback. Release to resume

normal playback.

Operating a VCR using the remote control

Press DVD/VTR (POWER).

[Green Button]

Ma n u fa ct u re r

Co d e

To turn On/Off

Sony

Panasonic

Mistubishi

701

704, 710

702

To search a chapter Press CH +/–.

forward or backward

To select a channel

To change channels

To record

Press the 0 – 9 buttons.

Press CH +/–.

Press ( while pressing r.

Press (.

Operating a DVD Player using the remote

control

DVD Pla ye r m a n u fa ct u re r co d e

n u m b e rs

To play

To stop

Press p.

To turn On/Off

Press DVD/VTR (POWER).

[Green Button]

To fast forward

To rewind the tape

To pause

Press ).

Ma n u fa ct u re r

Co d e

Press 0.

Sony

751

753

752

755

754

To play

To stop

To pause

Press (.

Press P. Press again to

Panasonic

Pioneer

RCA

Press p.

resume normal playback.

Press P. Press again to

Press ) or 0 during

playback. Release to

resume normal playback.

To search the

picture forward or

backward

resume normal playback.

Toshiba

To step through

different tracks of

an audio disc

Press ) to step forward or

0 to step backward.

Tips z

To change input

mode

Press TV/VTR.

•

In some rare cases, you may not be able to operate

To step through

different chapters

of a video disc

Press CH + to step forward

or CH – to step backward.

your non-Sony video equipment with the supplied

remote control. In this case, please use the

equipment' s own remote control.

Operating an MDP using the remote

control

When you remove the batteries, the code number may

revert to the factory setting.

To select tracks

directly

Press 0-9 buttons.

Press MENU.

To turn On/Off

Press DVD/VTR (POWER).

[Green Button]

To display the

menu (Set up)

To o p e ra t e vid e o e q u ip m e n t

1 Press DVD/ VTR (FUNCTION).

To play

To stop

To pause

Press (.

2 Use the VCR/ DVD/ MDP operation

Press p.

buttons indicated in the following tables.

Press P. Press again to

resume normal playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating a Cable Box or Satellite Receiver (SAT)

Ma n u fa ct u re r co d e n u m b e rs

(sa t e llit e re ce ive r)

To o p e ra t e t h e p ro je ct io n TV

Se t t in g t h e Ma n u fa ct u re r' s

Co d e

Press TV (FUNCTION). Then use the

projection TV control buttons to control the

projection TV.

Ma n u fa ct u re r

Co d e n u m b e r

You can program the supplied remote control

to operate a cable box or satellite receiver.

Sony

801 (preset code for

remote control)

802, 808

805

Press CODE SET, SAT/ CABLE

General Electric

Hitachi

Tips z

(FUNCTION), and the 0-9 buttons to enter

the manufacturer’s code number (see the

following chart), then press ENTER.

•

If more than one code number is listed, try entering

them one by one until you come to the correct code

for your equipment.

Hughes

804

803

802

Panasonic

RCA/PROSCAN

Toshiba

For example,to operate a Sony satellite receiver:

•

If you enter a new code number, the code number

you previously entered at that setting is erased.

806, 807

FUNCTION

SAT/CABLE

ENTER

CODE SET

To o p e ra t e t h e ca b le b o x o r

sa t e llit e re ce ive r (SAT)

In some rare cases, you may not be able to operate

your equipment with the supplied remote control. In

this case, use the equipment’s own remote control

unit.

Ma n u fa ct u re r co d e n u m b e rs

(ca b le b o x)

1 Press SAT/ CABLE (POWER) [Green

Button] to turn on/ off the cable box or

satellite receiver.

•

Whenever you remove the batteries — to replace

them, for example — if too much time is taken, the

code numbers may revert to the factory setting and

must be reset.

Co d e

Ma n u fa ct u re r

2 Press SAT/ CABLE (FUNCTION).

3 For other operations, refer to the

operating instructions that come with the

equipment.

222, 223, 224, 225, 226

201, 202, 203, 204, 205,

222, 206, 207, 208, 218

227, 228, 229

Hamlin/Regal

Jerrold/G.I

Oak

219, 220, 221

Panasonic

Pioneer

The GUIDE and INDEX (blue-labeled)

buttons can be used only with a satellite

receiver.

214, 215

209, 210, 211

Scientific Atlanta

Tocom

216, 217

212, 213

Zenith

If t h e re m o t e co n t ro l d o e sn ’t w o rk

•

Try repeating the set up procedures using

the other codes listed for your equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

If, after reading the following instructions, you have additional questions related to the use of your Sony projection TV, please call one of the following

numbers (English only).

Customers in the continental United States contact the Direct Response Center at: 1-800-222-SONY (7669)

Customers in Canada contact the Customer Relations Center at: (416) 499-SONY (7669)

The picture turns off and the

TIMER/STAND BY indicator on the

• The projection TV is equipped with a self-diagnosis function. If there is a problem with your projection TV, the TIMER/STAND BY indicator on the front

panel will flash repeatedly. Counting the number of flashes helps you inform qualified Sony personnel of the projection TV’s condition.

front panel flashes (self-diagnosis • Press POWER on the projection TV to turn it off, then inform qualified Sony personnel or the above Direct Response Center of the number of flashes.

function)

No picture (screen not lit), no

sound

• Make sure the power cord is plugged in.

• Operate with the buttons on both the projection TV and the remote control.

• Check to see if the TV/VIDEO setting is correct: when watching TV, set to TV, and when watching video tapes, set to VIDEO 1, 2, or 3.

• Try another channel. It could be station trouble.

• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 15)

• The Parental Control feature is activated. (see “To deactivate the Parental Control feature” on page 33)

Remote control does not

operate

• Batteries could be weak. Replace the batteries.

• Press TV (FUNCTION) when operating your projection TV.

• Make sure the projection TV’s power cord is connected securely to the wall outlet.

• Locate the projection TV at least 3-4 feet away from fluorescent lights.

• Check the polarity of the batteries.

Dark, poor or no picture

(screen lit), good sound

• Adjust “Picture” in the Video menu. (see “Picture Adjustment” on page 22)

• Adjust “Brightness” in the Video menu. (see “Picture Adjustment” on page 22)

• Check antenna/cable connections.

• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 15)

• Adjust the convergence again using the FLASH FOCUS button. (see “Adjusting the Convergence Automatically (FLASH FOCUS)” on page 15)

Good picture, no sound

• Press MUTING so that “Muting” disappears from the screen. (see “MUTING” on page 16)

• Check the MTS/SAP setting in the Audio menu. (see “MTS/SAP” on page 23)

• Make sure “Speaker” is set to “On” in the Audio menu. (see “Speaker” on page 24)

• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 15)

Download from Www.Somanuals.com. All Manuals Search And Download.

Cannot receive upper channels

(UHF) when using an antenna

• Make sure “Cable” is “Off” in the Channel Set Up menu. (see “Cable” on page 27)

• Use “Auto Program” to add receivable channels that are not presently in the TV’s memory. (see “Auto Program” on page 27)

No color

• Adjust “Color” in the Video menu. (see “Picture Adjustment” on page 22)

• Black and white programs cannot be seen in color.

• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 15)

Only snow and noise appear on

the screen

• Check the “Cable” setting in the Channel Set Up menu. (see “Cable” on page 27)

• Check the antenna/cable connections.

• Make sure the channel is broadcasting programs.

• Press ANT to change the input mode. (see “ANT” on page 18)

Dotted lines or stripes

• Adjust the antenna.

• Keep the projection TV away from noise sources such as cars, neon signs or hair-dryers.

TV is fixed to one channel

Double images or ghosts

Cannot operate the menu

• Use “Auto Program” to add receivable channels that are not presently in TV’s memory. (see “Auto Program” on page 27)

• Use a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings).

• If the item you want to choose appears in gray, you cannot select it.

• Press the projection TV’s power button off and on again.

Cannot receive any channels

when using cable TV

• Make sure “Cable” is “On” in the Channel Set Up menu. (see “Cable” on page 27)

• Use “Auto Program” to add receivable channels that are not presently in the TV’s memory. (see “Auto Program” on page 27)

Cannot gain enough volume when • Increase the volume at the cable box. Then press TV (FUNCTION) and adjust the projection TV’s volume.

using a cable box

Favorite Channel does not display • Verify that “Favorite Channel” is set to “Manual” in the Channel Set Up menu. (see “Setting Favorite Channel manually” on page 28)

your choices

Some video sources do not

• Ensure that “Video Label” is not set to “Skip.” (see “Video Label” on page 31)

appear when you press TV/VIDEO

Recording through MONITOR OUT • MONITOR OUT will not record both images in PIP. Only the main picture will be recorded.

does not function properly when

recording in PIP mode

• If you are recording the main picture and you switch to the sound of the sub picture using the AUDIO button, the main picture will be recorded with sound

from the other program.

Cannot play shooting games

• Some shooting games which involve pointing a light beam at the TV screen with an electronic gun or rifle cannot be used with this projection TV. For

details, see the instruction manual supplied with the video game software.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

VIDEO 3 IN

Pro je ct io n syst e m

Dim e n sio n s (W/H/D)

S VIDEO IN (4-pin mini DIN):

Y: 1 Vp-p, 75-ohms unbalanced, sync negative

C: 0.286 Vp-p (Burst signal), 75 ohms

VIDEO (phono jack): 1 Vp-p, 75-ohms

unbalanced, sync negative

Y: 1 Vp-p, 75 ohms, sync negative

P^B: 0.7 Vp-p, 75 ohms

PR: 0.7 Vp-p, 75 ohms

AUDIO (phono jacks): 500 mVrms (100%

modulation), Impedance: 47 kilohms

MONITOR OUT

VIDEO (phono jack): 1 Vp-p, 75-ohms

unbalanced, sync negative

AUDIO (phono jacks): 500 mVrms (100%

modulation), Impedance: 470 ohms

AUDIO (VAR/FIX) OUT (phono jacks): 500 mVrms

(100% modulation), Impedance: 470 ohms

CONTROL S OUT: minijack

3 picture tubes, 3 lenses, horizontal in-line

system

Pict u re t u b e

7-inch high-brightness monochrome tubes (6.3

raster size), with optical coupling and liquid

cooling system

Pro je ct io n le n se s

High performance, large diameter hybrid lens

F1.05

Te le visio n syst e m

American TV standard

Ch a n n e l co ve ra g e

VHF: 2–13/ UHF: 14 –69/ CATV: 1 – 125

An t e n n a

75 ohm external terminal for VHF/ UHF

Scre e n size (m e a su re d d ia g o n a lly)

43 inches (KP-43T70)

965 × 1,058 × 510 mm (38 × 41 / 8 × 20 / 8 inches)

(KP-43T70)

1,064 × 1,310 × 572 mm (41 / 8 × 51 / 8 × 22 / 2

inches) (KP-46C70)

1,105 × 1,338 × 579 mm (43 / 2 × 52 / 8 × 22 / 4

inches) (KP-48S70)

1,105 × 1,338 × 579 mm (43 / 2 × 52 / 8 × 22 / 4

inches) (KP-48S72)

1,216 × 1,417 × 632 mm (47 / 8 × 55 / 4 × 24 / 8

inches) (KP-53S70)

1,216 × 1,417 × 632 mm (47 / 8 × 55 / 4 × 24 / 8

inches) (KP-53N74)

1,370 × 1,560 × 670 mm (54 × 61 / 8 × 26 / 8

inches) (KP-61S70)

Ma ss

64.6 kg (142 lbs 7 oz) (KP-43T70)

61.6 kg (135 lbs 13 oz) (KP-46C70)

64 kg (141 lbs 2 oz) (KP-48S70)

67 kg (147 lbs 11 oz) (KP-48S72)

67.6 kg (149 lbs) (KP-53S70)

75.2 kg (165 lbs 13 oz) (KP-53N74)

84.6 kg (186 lbs 8 oz) (KP-61S70)

Su p p lie d a cce sso rie s

46 inches (KP-46C70)

Sp e a ke r

For KP-53N74

Tweeter: 66 mm (2 / 8”) × 2

Woofer: 130 mm (5 / 8”) × 2

48 inches (KP-48S70/ 48S72)

53 inches (KP-53S70/ 53N74)

61 inches (KP-61S70)

In p u t s/o u t p u t s

VIDEO 1 IN

For KP-43T70/46C70/48S70/48S72/53S70/61S70

Woofer: 100 mm (4”) × 2

Sp e a ke r o u t p u t

15W × 2 (KP-43T70/ 46C70/ 48S70/ 48S72/ 53S70/

61S70)

20 W × 2 (KP-53N74)

Po w e r re q u ire m e n t

120 V AC, 60 Hz

VIDEO 2 INPUT

Remote control RM-Y906 (1)

Batteries (2) size AA (R6)

Op t io n a l a cce sso rie s

S VIDEO IN (4-pin mini DIN):

Y: 1 Vp-p, 75-ohms unbalanced, sync negative

C: 0.286 Vp-p (Burst signal), 75 ohms

VIDEO (phono jack): 1 Vp-p, 75-ohms

unbalanced, sync negative

AUDIO (phono jacks): 500 mVrms (100%

modulation), Impedance: 47 kilohms

Connecting cables

RK-G34, RK-74A, RK-G69HG, VMC-10HG,

VMC-720M, VMC-810S/ 820S, YC-15V/ 30V

U/ V mixer EAC-66

Po w e r co n su m p t io n

In use (Max.): 160 W

In standby: 1 W

Design and specifications are subject to change

without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Channel Set Up menu operations

.................................................. 26, 27

Channel Skip/ Add ........................... 27

Coaxial cable ............................ 4, 5, 6, 8

Color ................................................... 22

Connecting Projection TV to

antenna ............................................ 4

audio system ................................ 12

cable ................................................. 4

cable box .......................................... 5

cable box and VCR ........................ 6

camcorder ....................................... 9

DTV receiver ................................... 9

DVD Player ................................... 11

satellite receiver (SAT) .................. 7

satellite receiver (SAT) and

Mode ............................................. 16, 22

(Vivid/ Standard/ Movie/

Personal 1/ Personal 2)

Movie rating ...................................... 36

MTS/ SAP ..................................... 18, 23

(Stereo/ SAP/ Mono/ Auto SAP)

MUTING button ............................... 16

Adjusting sliders ......................... 22, 23

ANT button ................................. 18, 20

Antenna cable ...................................... 5

Antenna connector ............................. 4

Editing using MONITOR OUT....... 10

Effect ................................................... 23

(BBE/ Surround/ Simulated/ Off )

F, G

Audio

button ............................... 18

Factory settings ........................... 22, 23

Favorite Channel

Selecting ........................................ 29

Setting ............................................ 28

FLASH FOCUS ........................... 15, 31

FREEZE button ........................... 17, 20

Audio menu operations ........ 23, 24

Audio Out .......................................... 24

(Fixed/ Variable)

Audio/ Video cable ............................. 4

Auto Program ............................. 15, 27

AUTO SET UP ................................... 14

Auto Volume ..................................... 23

AUX Hookup ................................ 5, 20

Noise Reduction ................................ 22

On/ Off Timer .................................... 25

Operating video equipment ............ 43

H, I

Hook Ups ............................................. 4

Hue ..................................................... 22

P, Q

Parental Control .......................... 30, 32

Parental Control menu

J, K

Balance ............................................... 23

Bass ..................................................... 23

Battery installation ........................... 14

Brightness .......................................... 22

VCR................................................ 8

Sony SAVA series speaker

Change Password ........................ 38

Country ......................................... 32

Custom Rating ....................... 34, 37

Parental Lock .......................... 32, 33

Rating ............................................ 33

Password ............................................ 32

Picture ................................................ 22

Picture Adjustment .......................... 22

(Picture/ Brightness/ Color/ Hue/

Sharpness)

Picture-in-Picture (PIP) .................... 19

PICTURE MODE button .................. 16

PIP operations

ACTIVE B/ b ................................ 19

AUDIO .......................................... 20

JUMP button ...................................... 17

system .......................................... 13

two VCRs ...................................... 10

VCR .................................................. 6

CONTROL S OUT jack ...................... 4

Convergence ...................................... 15

Current Time ..................................... 25

Language ........................................... 30

Learning menus

Audio ............................................. 23

Channel Set Up ............................ 26

Set Up ............................................ 30

Timer ............................................. 25

Video ............................................. 22

Cable ................................................... 27

Cable box

connection ................................... 5, 6

operation ....................................... 45

Caption Vision CC ..................... 18, 30

CATV cable .......................................... 5

CH +/ – ......................................... 16, 20

CHANNEL +/ – .......................... 14, 15

Channel Caption ............................... 26

Daylight Savings ............................... 25

DISPLAY button ............................... 17

DVD

connection ..................................... 11

operation ....................................... 44

DVD/ VTR (FUNCTION) ................ 44

Manufacturer code numbers ...... 43-45

MDP operation .................................. 44

MENU button .................................... 21

Menu selection .................................. 21

Download from Www.Somanuals.com. All Manuals Search And Download.

Index (continued)

CH+/ – ........................................... 20 Sharpness ........................................... 22

FREEZE ......................................... 20 Skip/ Add ........................................... 27

PIP .................................................. 19 SLEEP button .................................... 18

POSITION ..................................... 19 Sliders ........................................... 22, 23

SWAP ............................................ 20 Speaker ............................................... 24

V, W

VCR

connection ............................. 6, 8, 10

operation ....................................... 44

Video Label ........................................ 31

TV/ VIDEO ................................... 19

(On/ Off/ SAVA SP)

Video menu operations

.............. 22

Specifications ..................................... 48

Splitter .................................................. 6

SYSTEM OFF button ........................ 18

Surround ............................................ 23

SWAP button ..................................... 20

VOL +/ – ............................................. 16

VOLUME +/ – ............................. 14, 15

Remote control .................................. 14

Graphic Illustration ... (inside cover)

RESET button .............................. 22, 23

XDS ..................................................... 18

Y, Z

T, U

S Video cable ....................................... 4

Safety .................................................... 2

SAP ..................................................... 23

SAT/ CABLE (FUNCTION) ............ 45

Satellite receiver (SAT) operation ... 45

SET UP button ................................... 14

Y/ P^B/ PR ......................................... 9, 11

Timer menu operations

............. 25

Treble .................................................. 23

Troubleshooting .......................... 46, 47

TV (FUNCTION) button .................. 16

TV POWER button ........................... 16

TV rating ............................................ 35

TV/ VIDEO button ...................... 17, 19

TV/ VTR button ................................ 18

Set Up menu operations

Setting Up the Projection TV

....... 30, 31

Automatically ............................... 14

If, after reading this instruction manual, you

have additional questions related to the use of

your Sony projection TV, please call one of the

following numbers (English only).

Customers in the continental United States

contact the Direct Response Center at:

1-800-222-SONY (7669)

Customers in Canada contact the

Customer Relations Center at:

(416) 499-SONY (7669)

Printed in U.S.A.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sennheiser Telephone MM 60 iPhone User Manual
Sony Clock Radio ICF CD863 User Manual
Sony Ericsson Cell Phone W660I User Manual
Sony Flat Panel Television TH 50PZ750U User Manual
Sony Security Camera CD 9255 User Manual
Star Manufacturing Popcorn Poppers 39 A User Manual
Stow Marine Safety Devices SCT36 User Manual
StreamLight Stereo System MS2015 User Manual
Swann Webcam Net Mate User Manual
Sylvania CRT Television SST4273 User Manual