®
®
Epson PowerLite 76c
Multimedia Projector
User’sGuide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine-tuning the Projector. . . . . . . . . . . . . . . . . . . . 49
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications . . . . . . . . . . . . . . . . . . . . . 95
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
6
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Welcome
The Epson® PowerLite® 76c is an ultra-portable projector that offers
2000 ANSI lumens of brightness. From conference rooms to
auditoriums, your full-color presentations and videos will be bright
and visible even in ordinary indoor lighting.
Images are displayed at a native resolution of 1024 × 768 pixels.
Epson 3LCD technology ensures accurate color and remarkable
saturation, even in well-lit rooms. Support for S-Video contributes to
theater-quality performance.
You can connect the projector to a wide range of computers, including
®
IBM®-compatible PCs and laptops, Apple® Macintosh, Power
Macintosh® series (including G3, G4, and G5 systems), PowerBook®
computers, and many iMac® and iBook® series systems. With Epson’s
patented SizeWise™ technology, the projector supports computer
displays ranging from VGA through UXGA.
You can use any of the following video sources: HDTV, VCR, DVD
™
player, gaming console (such as Microsoft® Xbox, Sony®
PlayStation® 2, and Nintendo GameCube™), camcorder, digital
camera, or laser disc player. The projector supports NTSC, PAL, and
SECAM video formats.
You can connect up to three devices to the projector at the same time.
The source buttons let you easily switch among them. With the
projector’s Source Search button, you don’t even have to identify
your input source. Just press the button until you see the image you
want on the screen.
To prevent unauthorized use of the projector, you can assign a
password, create a user logo which is displayed at startup to identify
the projector, and disable the projector’s buttons through the
Operation Lock feature. For more information about security features,
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting the Most from Your Projector
Depending on your presentation, you can take advantage of any or all
of these options:
■
Connecting to a laptop or other computer
If you want to connect the projector to a laptop or desktop
computer, see page 18. For additional presentation control, you
can connect a USB cable to the projector for running slide shows,
and connect an external monitor to view the presentation on your
computer simultaneously.
■
■
Connecting to video sources
You can connect a DVD player, VCR, HDTV, camcorder, laser
disc player, digital camera, and other video sources to your
projector. See page 24 for instructions.
Using the remote control
The remote control lets you switch from computer to video
sources, zoom in on part of your image, freeze or mute the
presentation, and adjust many other projector features. For
By connecting a USB cable to your projector, you can also use the
remote control as a wireless mouse. This lets you click through
computer-based presentations (such as PowerPoint®) from up to
20 feet away. For more information, see page 47.
8
Welcome
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Documentation
Your documentation includes a Quick Setup sheet, warranty
brochures, and an Epson PrivateLine® Support card.
The Quick Setup sheet gives instructions to quickly set up your
projector and connect it to a computer or video device.
This book contains all the information you need to set up and use
your projector. Please follow these guidelines as you read through it:
■
■
■
Warnings must be followed carefully to avoid bodily injury.
Cautions must be observed to avoid damage to your equipment.
Notes contain important information about your projector.
Getting More Information
Need tips on giving presentations? How about quick steps for setting
up your projector? Here’s where you can look for help:
■
www.presentersonline.com
Includes a library of articles covering presentation tips, tricks, and
technology. The site provides templates, clip art, and sound clips,
as well as Presenters Services to use on the road. Even more
resources and services are available if you register to join the
Presenters Club®—and it’s free.
■
■
Built-in help system
Press the Help button on the remote control or projector to get
quick solutions for common problems. See page 80 for details.
support.epson.com
Download FAQs (frequently asked questions) and e-mail your
questions to Epson support.
If you still need help after checking this User’s Guide and the sources
listed above, you can use the Epson PrivateLine Support service to get
help fast. Call (800) 637-7661 and enter the PIN on your PrivateLine
Welcome
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Registration and Warranty
Your projector comes with a basic carry-in warranty and an
international warranty that let you project with confidence anywhere
in the world. For details, see the warranty brochures that came with
your projector.
SM
In addition, Epson offers free Extra Care Road Service. In the
unlikely event of an equipment failure, you won’t have to wait for
your unit to be repaired. Instead, Epson will ship you a replacement
unit anywhere in the United States or Canada, usually via overnight
delivery. See the Extra Care Road Service brochure for details.
To register, complete the registration form that came with your
projector and mail it to Epson. Or register your product online at:
http://www.epson.com/webreg
Registering also lets you receive special updates on new accessories,
products, and services.
Unpacking the Projector
After unpacking the projector, make sure you have all these items:
Remote control
and batteries
Projector
Soft carrying case
Password Protected
Sticker
VGA computer cable
Quick Setup sheet
Power cord
10 Welcome
Download from Www.Somanuals.com. All Manuals Search And Download.
Save all packaging in case you need to ship the projector. Always use
the original packaging (or equivalent) when you need to send the
projector to another location.
If you are moving the projector by hand, use the carrying case
included with the projector.
Projector Parts
Temperature light
Power button
Security lock
Power light
Zoom ring
Lamp light
Control panel
Lamp cover
Focus ring
Remote control
sensor
Lens cap
Air exhaust vents
Front adjustable foot
Foot release lever
Video port
USB port for wireless mouse
Computer(Component Video) port
S-Video port
Monitor Out port
Power
inlet
Rear adjustable foot
Audio input ports
Speaker
Remote control sensor
Welcome 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■
■
■
To receive an S-Video signal, you need an S-Video cable. One is
usually provided with your video device, or you can purchase it
from Epson. See page 13.
To receive a component video signal from a VCR or other video
device, you need a D-sub, 15-pin, VGA-to-component video
cable, which is available from Epson. See page 13.
Some older PowerBooks and Macintosh desktop models may
need a Macintosh video adapter; see your computer dealer. Older
iMac systems may need a special adapter to provide a VGA output
port; see your computer dealer.
■
■
To receive an audio signal, you need a commercially available
audio cable; see your computer or electronics dealer.
To use the projector’s remote control as a wireless mouse, you
need a USB cable; see your computer or electronics dealer.
12 Welcome
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
To enhance your use of the projector, Epson provides the following
optional accessories:
note
To purchase a replacement
remote control, call
(562) 276-4394 (U.S.) or
(905) 709-3839 (for dealer
referral in Canada).
Product
Product number
V13H010L34
V13H134A08
ELPKS35-S
Replacement lamp
Air filter set (includes 2 filters)
Samsonite® wheeled soft case for projector and
laptop
Samsonite soft shoulder case with laptop
compartment
ELPKS43
Component video cable
S-Video cable
ELPKC19
ELPSV01
Distribution amplifier
ELPDA01
50-inch portable screen
ELPSC06
ELPSC07
ELPSC08
ELPSC09
60-inch portable pop-up screen
80-inch portable pop-up screen
83.6-inch hanging pull-down screen
Image presentation camera ELPDC05
Kensington® security lock
V12H162020
ELPSL01
Ceiling mount (gyro lock with suspension adapter)
False ceiling plate
Suspension adapter
Security bracket/cabling for gyro lock mounts
Adjustable ceiling channel
ELPMBUNI
ELPMBFCP
ELPMBAPL
ELPMBSEC
ELPMBACC
You can purchase video cables, screens, carrying cases, or other
accessories from an Epson authorized reseller. Please call
800-GO-EPSON (800-463-7766) for product information and to
find the nearest authorized reseller. To purchase online, visit the
SM
Epson Store at www.epsonstore.com (U.S. sales only). In Canada,
please call (800) 463-7766 for dealer referral.
Welcome 13
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Welcome
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Setting Up the Projector
This chapter tells you how to set up the projector and connect it to a
computer or video source. You can connect up to three devices
simultaneously: three video sources or one computer and two video
sources.
You’ll find instructions for the following in this chapter:
■
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Positioning the Projector
Before connecting the projector, you
need to decide where to place it. If
you’re setting up the projector yourself
and it isn’t already installed in the
room you’re using, you’ll probably
want to place it on a table in front of
the screen, as shown.
This lets you stand in the front of the room, face the audience, and
remain close enough to the equipment to be able to control it. Try to
leave as much space as possible between the projector and the screen to
get a good-size image.
Place the projector somewhere between 3 and 35 feet from the screen.
Use the figure below to help you determine exactly how far. Image size
increases with distance, but can vary depending on how you’ve
adjusted the optical zoom and other settings.
note
You can download the
Projection Distance
Calculator program from the
Drivers and Downloads
section of Epson’s web site:
http://support.epson.com.
29.5 to 35.4 feet
2.8 to 3.4 feet
5.8 to 7 feet
Also keep these considerations in mind:
■
■
Place the projector on a sturdy, level surface.
Make sure there is plenty of space for ventilation around and
under the projector. Do not set the projector on top of loose
papers that could block the vents under the projector.
■
Make sure the projector is within 6 feet (2 m) of a grounded
electrical outlet or extension cord.
16 Setting Up the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Try to place the projector directly in front of the center of the screen,
facing it toward the screen squarely. If the projector isn’t positioned
this way, the image will be “keystone” shaped, instead of square or
rectangular.
If you place the projector below the level of the screen, you’ll have to
tilt it up by extending the front adjustable foot, as described on
page 38. This also causes the image to be keystone shaped, instead of
square or rectangular. To adjust the keystone correction value,
Other Installations
You can also project from behind the screen or from the ceiling, with
the projector mounted upside-down:
Rear projection (using a
translucent screen)
Rear/ceiling projection (using
a translucent screen)
Front/ceiling projection
To project from overhead, you’ll need the optional ceiling mount
hardware. (See page 13 for ordering information.) You’ll also need to
select Front/Ceiling or Rear/Ceiling for the Projection option in the
more information.
Setting Up the Projector 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Computer
You can connect the PowerLite projector to any computer that has a
standard VGA or BNC monitor port, including PC notebook and
laptop computers, Macintosh PowerBooks and iBooks, and hand-held
devices.
note
If you have an iBook with an
RCA video-out port, follow
the instructions for
connecting to a video device
Follow the instructions in this section to:
■
■
Connect the projector to your computer with the VGA cable
included with the projector.
Connect the projector to your computer with a commercially
available VGA–5BNC cable.
After connecting the projector to your computer, you may also
want to:
■
Connect a USB cable to your projector so that you can use the
■
Connect a monitor to the projector so you can view your
presentation close-up as well as on-screen (not necessary if you’re
using a laptop); see page 22
■
Connect the projector to your computer with a commercially
available audio cable to play computer audio; see page 23
18 Setting Up the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting with the VGA Cable
Follow these instructions to connect to your computer with the VGA
cable that came with your projector. Before you start, make sure your
computer and the projector are turned off.
1. If you are connecting the projector to a desktop computer,
disconnect the monitor cable from your computer.
2. Locate the VGA computer cable that
came with the projector.
Connect one end of the cable to the
projector’s Computer(Component
Video) port.
VGA computer cable
3. Connect the other end of the cable to your computer’s video-out
or monitor port.
If you’re using a PowerBook or iBook and you can’t connect the
cable, you may need to use an optional Macintosh video adapter;
see your computer dealer.
4. If you want to view the display simultaneously on your computer
monitor and the projector screen, see “Connecting an External
5. Tighten the screws on the connectors.
If you don’t need to make any other connections, you can plug in
If more than one device is connected to the projector, select the
correct source after projection starts by pressing the Source Search
button on the projector or the Comp button on the remote control.
Setting Up the Projector 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting with a VGA-5BNC Cable
If your computer provides video output through BNC connectors,
follow these instructions to connect the projector to your computer
with an optional VGA-5BNC cable. Before you start, make sure your
computer and the projector are turned off.
VGA-5BNC cable
1. Disconnect the monitor cable from your computer.
2. Connect the cable’s VGA connector to the projector’s
Computer(Component Video) port.
3. Connect the BNC connectors to your computer’s BNC ports.
4. If you want to view the display simultaneously on your computer
monitor and the projector screen, see “Connecting an External
5. Tighten the screws on the VGA connector.
If you don’t need to make any other connections, you can plug in
If more than one device is connected to the projector, select the
correct source after projection starts by pressing the Source Search
button on the projector or the Comp button on the remote control.
20 Setting Up the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a USB Cable for Remote Mouse
Control
Using the remote control as a wireless mouse lets you click through
slide show-style presentations, such as PowerPoint, from up to 20 feet
away. This makes it easy to deliver your presentation, since you won’t
need to stand near your computer.
note
For details about using the
remote control as a wireless
mouse, see page 47.
To use the wireless mouse function, you will need a USB cable, a
system with a working USB port, and the full version of one of these
operating systems:
Windows®
Macintosh
Windows 98SE, 2000, Me, or XP
Macintosh OS 9, OS X
1. If you are using a desktop computer, disconnect the mouse cable
from your computer.
2. Connect the square end of the USB cable to the projector’s
USB port.
3. Connect the flat end of the cable to any available USB port on
your computer.
4. If necessary, configure your laptop to work with an external
mouse.
If you don’t need to make any other connections, you can plug in
Setting Up the Projector 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an External Monitor
If you want to see your presentation close-up as well as on the
projection screen, you can connect an external monitor to the
projector. This lets you view images on your computer monitor while
the projector is in standby mode (plugged in but not turned on) and
check your presentation or switch between picture sources even if
you’ve pressed the A/V Mute button on the remote control to turn off
projection on the screen.
note
Some LCD monitors may
not be able to display the
image correctly. If you have
trouble displaying the
image, connect a multiscan
monitor. If you’re projecting
computer images, make sure
the computer’s refresh rate is
set to 65 Hz or greater.
Simultaneous display is possible only when the computer is connected
to the projector’s Computer(Component Video) port.
Make sure the projector and computer are off. Then connect the
monitor’s cable to the projector’s Monitor Out port, as shown:
If you don’t need to make any other connections, you can plug in
22 Setting Up the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Sound Through the Projector
You can connect a commercially available audio adapter cable to take
advantage of the projector’s built-in speaker. You can obtain an audio
adapter cable (3.5-mm stereo miniplug to two male RCA plugs) from
a computer or electronics dealer.
1. Connect the RCA plugs on the audio adapter cable to the
L-Audio-R jacks on the projector.
2. Connect the other end of the audio cable to your laptop’s
headphone jack or
audio-out jack, or your desktop’s
speaker or audio-out port.
If you don’t need to make any other connections, you can plug in
Setting Up the Projector 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Video Sources
You can connect a DVD player, VCR, camcorder, laser disc player,
digital camera, gaming console—such as Microsoft Xbox, Sony
PlayStation 2, or Nintendo GameCube—or any other compatible
video source to your projector. You can connect up to three video
devices at one time.
The projector supports HDTV, SDTV, NTSC, PAL, and SECAM,
and automatically detects the video format. It can receive composite
video, S-Video, RGB video, and component video. The type of cable
you need depends on the video source:
note
The projector does not
support TV antenna cable
F connectors.
■
■
■
■
For composite video, use a commercially available RCA A/V
For S-Video, use the S-Video cable supplied with your video
device or order one from Epson. See page 26.
For RGB video, use the VGA computer cable included with the
projector. See page 27.
For component video, you’ll need the optional Epson component
After connecting your video device to the projector, you may want to
connect an audio cable to play sound from your video equipment
through the projector’s built-in speaker. See page 29 for instructions.
24 Setting Up the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Composite Video Source
If you’re connecting a composite video device, use a commercially
available RCA A/V cable. Before starting, make sure the projector and
your DVD player or other video source are turned off.
1. Connect the yellow RCA plug on one end of the cable to the
projector’s yellow Video jack.
2. Connect the yellow plug on the other end of the cable to the
video-out port on your video source.
3. To play sound through the projector, follow the instructions
beginning on page 29.
If you don’t need to make any other connections, you can plug in
If more than one device is connected to the projector, select the
correct source after projection starts by pressing the Source Search
button on the projector or the Video button on the remote control.
Setting Up the Projector 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an S-Video Source
If your video source has an S-Video jack, you can use it to project a
higher quality video image. You’ll need an S-Video cable, which is
usually provided with your video source, or you can purchase one
information.
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1. Insert one end of the S-Video cable into the projector’s S-Video
port and the other end into the S-Video output port of your video
source.
2. To play sound through the projector, follow the instructions
beginning on page 29.
If you don’t need to make any other connections, you can plug in
If more than one device is connected to the projector, select the
correct source after projection starts by pressing the Source Search
button on the projector or the S-Video button on the remote control.
26 Setting Up the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an RGB Video Source
Follow these instructions to connect the projector to a video player or
satellite receiver that has an RGB video output port using the VGA
computer cable that came with the projector.
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1. Connect one end of the VGA computer cable to the
Computer(Component Video) port on the projector.
2. Connect the other end to the video port on your player.
3. To play sound through the projector, follow the instructions
beginning on page 29.
If you don’t need to make any other connections, you can plug in
If more than one device is connected to the projector, select
Computer (RGB) as the source after projection starts by pressing the
Source Search button on the projector or the Comp button on the
Setting Up the Projector 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Component Video Source
If your video source has component video connectors, you can use
them to project a higher quality video image. You’ll need a
component video cable, which can be purchased from Epson (part
Before starting, make sure the projector and your DVD player or
other video device are turned off.
1. Connect the large end of the component video cable to the
projector’s Computer(Component Video) port.
2. Insert the three ends of the component video cable into the
R, G, and B ports on your video source.
3. To play sound through the projector, follow the instructions
beginning on page 29.
If you don’t need to make any other connections, you can plug in
If more than one device is connected to your projector, select
Computer (Component Video) as the source by pressing the Source
Search button on the projector or the Comp button on the remote
control. See page 34.
28 Setting Up the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Sound Through the Projector
The projector has a built-in speaker with a maximum output of 1 W.
You can play sound from your video equipment through the
projector’s speaker if your video device has an audio output port.
For RCA-Style Audio Output Ports
Most video devices have an RCA-style audio output port. In this case,
use a commercially available RCA-style audio cable to connect the
projector to your video source:
1. Connect the red and white plugs on one end of the audio cable to
the L-Audio-R jacks on the projector.
2. Connect the red and white plugs on the other end of the audio
cable to the corresponding color-coded audio output port on your
video source.
If you don’t need to make any other connections, you can plug in
Setting Up the Projector 29
Download from Www.Somanuals.com. All Manuals Search And Download.
For Stereo Mini-Jack Audio Output Ports
Some video devices, especially camcorders, may have a stereo
mini-jack audio output port. In this case, use a commercially available
audio adapter cable (3.5-mm stereo miniplug to two male RCA plugs)
to connect to the projector:
1. Connect the red and white plugs on the audio adapter cable to the
L-Audio-R jacks on the projector.
2. Connect the other end of the audio adapter cable to your video
device’s audio output port.
If you don’t need to make any other connections, you can plug in
30 Setting Up the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Projecting
Once you’ve set up the projector, you’re ready to turn it on, adjust
the image, and give your presentation.
Although you can operate the projector without it, the remote control
using the remote. This chapter covers the following:
■
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning On Your Equipment
Make sure your projector and other equipment are set up and
projector, as described below.
If you turn on your connected computer or video equipment before
starting the projector, the projector automatically detects and displays
the image source. If you turn on the projector first, or have multiple
pieces of connected equipment, you may have to select the image
source manually. See page 34.
Turning On the Projector
Follow these steps to plug in and turn on the projector:
1. Push in the tabs and remove the lens cap.
caution
Do not use the projector with
the lens cap in place. The
heat generated by the lamp
can damage it.
2. Connect one end of the power cord to the projector’s power inlet.
3. Connect the other end to an electrical outlet.
The power light on top of the projector turns orange, indicating
that the projector is receiving power but not yet turned on. Wait
until the light stops flashing but stays orange.
32 Projecting
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Turn on your computer or video source if you have not already.
5. Press the P Power button on top of the projector to turn it on.
note
(You can also press the P Power button on the remote control.)
If you are using the remote
control for the first time, be
sure to insert the batteries as
described on the Quick
Setup poster.
Power button
Projector
Remote control
The projector beeps and the power light flashes green as the
projector warms up. The projector lamp comes on in about 4
seconds and the power light stays green.
warning
Never look into the lens when
the lamp is on. This can
damage your eyes, and is
especially dangerous for
children.
■
If you’re using a computer, you should see your computer
display projected after a moment or two. If not, you need to
select the image source. See page 34.
(Windows only: If you see a message saying that it has found
a plug-and-play monitor, click Cancel.)
■
■
If you’re projecting a video, press the Source Search button
on the projector or remote control to switch to your video
source. Then press the Play button on your DVD player or
other device.
If you are prompted to enter a password, see page 67.
When you’re done with your presentation, shut down the projector as
Projecting 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Image Source
Selecting the image source lets you switch between images input from
different pieces of equipment connected to the projector (such as a
computer and DVD player). If you don’t see the image you want,
press one of the following buttons on the remote control:
note
The name of the selected
image source appears in the
upper right corner of the
screen.
■
Comp
Press this button to move through the following options:
Computer (Auto), Computer (RGB), and Computer
(Component Video).
■
■
S-Video
Press to select S-Video.
Video
Press to select Video.
You can also press the Source Search button on the remote control
or projector until the correct device image is projected. If a projected
image fails to appear, see the next section for help.
and making other image adjustments.
What To Do If You See a Blank Screen
If you see a blank screen or a blue screen with the message No Signal
after turning on your computer or video source, try the following:
■
■
■
Make sure the cables are connected correctly, as described in
Make sure the power light is green and not flashing and the lens
cap is off.
Make sure you’ve selected the correct image source; see the
previous section. Allow a few seconds for the projector to sync up
after pressing the button.
■
Check the Signal menu to make sure the correct input source is
selected. See page 56.
34 Projecting
Download from Www.Somanuals.com. All Manuals Search And Download.
If you’re using a PC laptop:
■
Hold down the Fn key and press the function key that lets you
display on an external monitor. It may have an icon such as
or it may be labelled CRT/LCD. Allow a few seconds for the
projector to sync up after pressing it. Check your laptop’s manual
or online help for details.
On most systems, the
or CRT/LCD key lets you toggle
between the LCD screen and the projector, or display on both at
the same time.
■
If you’re projecting from a laptop, and you don’t see the same
image on the projection screen and computer screen, check your
monitor settings to make sure both the LCD screen and the
external monitor port are enabled.
From the Control Panel, open the Display utility. Click the
Settings tab, then click Advanced. The method for adjusting
the settings varies by brand; you may need to click a Monitor tab,
then make sure the external Monitor port is set as your primary
display and/or enabled. See your computer’s documentation or
online help for details.
If you’re using a Macintosh laptop with OS X:
You may need to set up your system to display on the projector screen
as well as the LCD screen. Follow these steps:
1. From the Apple menu, select System Preferences, then click
Display or Displays.
2. Select VGA Display or Color LCD, click Arrange or
Arrangement, and make sure Mirror Displays is checked.
Click here
Select Mirror
Displays
Projecting 35
Download from Www.Somanuals.com. All Manuals Search And Download.
If you’re using a Macintosh laptop with OS 9:
You may need to set up your system to display on the projector screen
as well as the LCD screen. Follow these steps:
1. From the Apple menu, select Control Panels, then click
Monitors or Monitors and Sound.
2. Click the Arrange icon.
Click here
Drag one
monitor icon on
top of the other
3. Drag one monitor icon on top of the other.
If the Arrange option isn’t available, you may need to select one of
the Simulscan resolution settings:
1. Click the Monitor icon, if necessary.
Click here
Select a
Simulscan
resolution
2. Select a Simulscan resolution, as shown. (Allow a few seconds
for the projector to sync up after making the selection.)
36 Projecting
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Image
Once you see your image, you’ll need to make certain adjustments:
■
■
To focus or zoom your image, below.
If the image is too high or too low, you can reposition it.
■
■
■
■
To adjust image brightness, see page 39.
To change the color mode for your image and surroundings, see
You can make many other adjustments to the image—such as
changing the brightness, contrast, and aspect ratio—using the
Focusing and Zooming Your Image
Rotate the focus ring to sharpen the image.
Focus ring
Rotate the zoom ring to reduce or enlarge the image.
Zoom ring
You can also change the image size by moving the projector closer to
or farther away from the screen. You can use the E-Zoom buttons on
the remote control to zoom in on a portion of the image. See page 45
for instructions.
Projecting 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Height of Your Image
If the image is too low, you can raise it by extending the projector’s
front adjustable foot.
1. Stand behind the projector. Press up on the blue foot release
lever and lift the front of the projector to extend the front
adjustable foot.
Foot
2. Once the image is positioned where you want, release the lever to
lock the foot in position.
3. To fine-tune the height of the image,
rotate the foot at the back of the
projector.
If the image is no longer rectangular after
raising it, see the next section.
38 Projecting
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Image Shape
If the projector is tilted up or down, the images that are displayed will
be distorted. To correct the distortion or “keystone” shape, do one or
more of the following:
■
■
If your image looks like
off to one side of the screen, at an angle. Move it directly in front
of the center of the screen, facing the screen squarely.
or
, you’ve placed the projector
If your image looks like
keystone correction value. Press the
or
, you need to adjust the
or buttons on the
projector to correct the shape of the image. After correction, your
image will be slightly smaller.
You can also make keystone adjustments using the projector’s Settings
menu. See page 59.
Adjusting the Brightness
The brightness of an image depends on the source you are projecting
and the amount of light in the room. If the image is too bright or not
bright enough, here are two ways you can adjust it:
■
■
Select Low or High for the Brightness Control option in the
Settings menu. (See page 59.) Low brightness mode extends the
life of the lamp and decreases the fan noise.
Projecting 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Correcting Computer Images
If you’ve connected a computer and the image doesn’t look right, or it
doesn’t fit properly on the screen, press the Auto button on the
remote control. This automatically resets the projector’s tracking,
sync, resolution, and position settings. You must be projecting a
computer image for this button to have any effect. Additionally, if the
Auto Setup option in the Signal menu is set to OFF, the Auto
function will not work. See page 57.
Adjusting the Color Mode
Color Mode button
You may want to adjust the color mode to select a different setting
that is appropriate for the image you’re projecting and the
environment in which you’re projecting it.
If you’re projecting computer or RGB video images, the default color
mode is Presentation, which is appropriate for presentations in
bright rooms.
The following table lists the color modes available.
Color mode
Description
Photo
Best for projecting still images with vivid color in a
bright room (Computer input only).
Sports
Best for watching TV in a bright room (component,
S-video, or composite video input only).
Auto button
Presentation
Use when you’re projecting a presentation in a
bright room.
Theatre
Game
sRGB
Use when projecting movies in a dark room.
Best for playing video games in a bright room.
Use when projecting computer images conforming to
the sRGB color standard.
Blackboard
Choose this fixed color mode when you need to
project against a green blackboard.
40 Projecting
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the color mode, press the Color Mode button on the
remote control until you see the mode you want. The currently
selected setting appears in the upper right corner of the screen. You
can also use the projector menu system to change the color mode in
Adjusting the Volume
You can use the buttons on the remote control or projector to increase
or decrease the volume the projector’s built-in speaker. Press the
note
You can also adjust the
volume using the projector’s
Settings menu. See page 58
for details.
button to increase the volume, or the
volume gauge appears on the screen while the volume is being
adjusted.
button to decrease it. A
Volume controls
note
When the projector has not
received any input signals for
30 minutes, it automatically
turns off the projector lamp
and enters “sleep mode.” This
conserves electricity, cools the
projector, and extends the life
of the lamp. If you are done
using the projector, unplug
the power cord. If you want
to start projecting again, press
the P Power button. You
can turn sleep mode on or off
through the Extended menu.
Shutting Down the Projector
When you’ve finished using the projector, follow the recommended
procedure to shut it down.
1. If you’re using a computer, shut it down first; otherwise you may
not be able to see your computer’s display to shut it down
properly.
2. To turn off the projector, press the P Power button on the
projector or remote control.
You see this confirmation message:
(If you don’t want to turn it off, press
any other button or wait a few
seconds until it disappears.)
Projecting 41
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the P Power button again. The projector beeps twice, the
lamp is turned off, and the power light turns orange.
With Epson’s exclusive Instant Off™ technology there’s no
cool-down period, so you can pack up and go immediately after
turning off the projector.
If you want to turn the projector on again, press the P Power
button.
4. Press up on the blue foot release lever and lower the projector to
retract the front adjustable foot, as shown.
Foot
caution
To avoid damaging the
projector or lamp, never
unplug the power cord
when the power light is
green or flashing orange.
5. Replace the lens cap and unplug the power cord.
6. Turn off and disconnect any equipment plugged into the
projector.
7. If you won’t be using the projector for awhile, store it in the soft
case that came with it or in a protective case.
42 Projecting
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Using the Remote Control
The remote control lets you access your projector’s features from
anywhere in the room—up to 20 feet away. For example, you can turn
the projector on and off, freeze the presentation, zoom in on a portion
of your image, and access the menu system. (The projector menus let
If you’re using a computer and you’ve connected a USB cable
mouse.
When using the remote control, stand within 20 feet of the projector.
Point the remote control either at the front or back of the projector or
at the screen (the projector’s front sensor can detect signals bounced
off the screen). Press the button for the function you want to use.
This chapter covers the following information:
■
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Picture and Sound
You can use the remote control to select your source, temporarily turn
off the picture and sound, freeze the action, or zoom in on the picture.
Make sure you have set up your projector and connected any
Switching Between Picture Sources
If you’ve connected your projector to more than one computer and/or
video source, you can use the buttons on the remote control to switch
between the different sources.
Select a source
■
Press the Comp button to select the computer or video source
connected to the projector’s Computer(Component Video)
port.
■
■
■
Press the S-Video button to select a video source connected to the
projector’s S-Video port.
Press the Video button to select a video source connected to the
projector’s Video port.
Press the Source Search button to move successively through all
of the input sources.
Move through all the input
sources in sequence
After you select a source, the screen goes dark for a moment before the
image appears. The name of the selected source (such as Computer or
S-Video) appears briefly on the screen.
44 Using the Remote Control
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning Off the Picture and Sound
Press the A/V Mute button on the remote control to turn off the
image and sound and darken your screen. This is useful if you want to
temporarily re-direct your audience’s attention without the distraction
of a bright screen.
■
To turn off the picture and sound, press the A/V Mute button.
The screen goes dark.
■
To turn the image and sound back on, press the button again, or
press Esc.
You can create an image, such as a company logo or a picture, to
display on the screen whenever you press the A/V Mute button. See
page 64 for more information.
Esc
Zoom in
Zoom out
Stopping Action
Press the Freeze button to stop the action in your video or computer
image and keep the current image on the screen. The sound will
continue, however. Also, because the source continues to transmit
signals, you won’t resume the action from the point you paused it.
Press the Freeze button again or press Esc to restart it.
Zooming Your Image
A/V Mute
Freeze
Follow these steps to zoom in on a portion of the image:
1. Press the E-Zoom button on the remote control.
You see a crosshair indicating the center of the zoom-in area.
2. Use the pointer button to position the crosshair in the area you
want to enlarge.
3. Continue pressing the E-Zoom button to enlarge the selected
area up to 4 times.
Using the Remote Control 45
Download from Www.Somanuals.com. All Manuals Search And Download.
4. While the image is enlarged, you can:
■
■
Use the
pointer button to pan about.
Press the E-Zoom button to zoom out.
5. When you’re done, press the ESC button to return to the original
size.
note
Changing the Image’s Aspect Ratio
You must be projecting
component, composite, or
S-Video images to change the
aspect ratio.
If you’re projecting a widescreen format image, you can use the
Resize button on the remote control to change the aspect ratio.
Follow these steps:
You can also change the
aspect ratio using the
projector’s Signal menu. See
page 56 for details.
1. Press the Resize button once to change the aspect ratio to 16:9
for widescreen format.
2. Press it again to return to 4:3 aspect ratio.
46 Using the Remote Control
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control as a Wireless
Mouse
When you use the remote control as a wireless mouse, you can control
your computer or click through slide show-style presentations (such as
PowerPoint) from up to 20 feet away. This gives you more flexibility,
since you don’t need to stand near your computer to change slides.
Left-click or
double-click
Move the
pointer
To control your computer with the remote, make sure you have
connected your computer to the projector with a USB cable as
■
■
To display the mouse pointer, press the Pointer button.
To move the pointer on the screen, aim the remote at the screen
and use the
pointer button.
■
■
■
■
To click (or left-click), press the Enter button.
To right-click, press the Esc button.
Display the
pointer
Right-click
To double-click, press the Enter button twice.
To click and drag, press down and hold the Enter button and use
the
pointer button to move where you want to drag.
Page down
Page up
■
To advance slides in a PowerPoint presentation in Slide Show
mode, press the Page up or Enter button on the remote control.
Press the Page down or Esc button to go back a slide.
Using the Remote Control 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Batteries
The remote control uses two AAA alkaline batteries. Follow these
note
steps when you need to replace them:
The remote control
1. Press in the tab to remove the battery cover.
automatically shuts off when
it detects a button being
pressed more than 30 seconds.
This conserves battery life. It
can be helpful, for example,
when the remote is in a
carrying case and the
P Power button is
accidentally pushed.
2. Remove the old batteries, then insert the new ones as shown.
caution
When replacing batteries,
take the following
precautions:
■ Replace the batteries as
soon as they run out. If a
battery leaks, wipe away
battery fluid with a soft cloth.
If fluid gets on your hands,
wash them immediately.
3. Replace the battery cover. (It should click into place.)
■ Do not expose batteries to
heat or flame.
■ Dispose of used batteries
according to local regulations.
■ Remove the batteries if you
won’t be using the remote
control for a long period of
time.
48 Using the Remote Control
Download from Www.Somanuals.com. All Manuals Search And Download.
433
Fine-tuning the Projector
You can use the Menu button on the projector or remote control to
access on-screen menus to adjust the image, sound, and other features.
This chapter covers the following information:
■
■
Adjusting the input signal
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Projector’s Menu System
The six projector menus let you adjust and customize the projector
features:
■
■
The Image menu lets you modify the colors of the projected
image and fine-tune brightness, contrast, and sharpness.
The Signal menu lets you make adjustments to the input signal.
You can select your input source, change the image position and
aspect ratio, and adjust tracking and sync for computer images.
■
The Settings menu lets you customize the way you use the
projector. It allows you to adjust the volume and keystone
correction, set lamp brightness to high or low, select the shape of
the mouse pointer, and disable buttons on the projector while you
are projecting.
■
The Extended menu lets you customize the way you set up the
projector. Among the options, you can select the menu language,
set rear or ceiling projection, and record a custom image or logo
to be displayed as the startup screen or whenever you press the
A/V Mute button on the remote control.
■
■
The Info menu provides information about lamp status and
computer or video settings.
The Reset menu lets you restore the projector’s factory default
settings.
50 Fine-tuning the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Menu Settings
Use the buttons on the remote control to access the menus and change
settings. Follow these steps:
1. Press the Menu button on the remote control or projector to
Menu button Esc button
display the menu screen:
Menu options
Menus
Enter button Arrow buttons
The six menus are listed on the left, and the options available for
the highlighted menu are shown on the right.
Pointer button
2. Use the
pointer button on the remote control or the up and
down arrow buttons on the projector to scroll through the menu
list. When you’ve highlighted the desired menu, press the Enter
button to select it.
The highlight moves to the first option for that menu.
3. Use the
pointer button or the up and down arrow buttons to
scroll through the list of options. (The options available depend
on which source is selected.)
Enter button
Esc button
Fine-tuning the Projector 51
Download from Www.Somanuals.com. All Manuals Search And Download.
4. After highlighting the option you want to adjust, use the
pointer button on the remote control or left or right arrow
buttons on the projector to change the setting. In some cases, you
may have to press the Enter button to see a sub-screen for
changing the setting.
■
Press the left or right side of the
pointer button or the left
or right arrow buttons on the projector to adjust a slider bar.
■
To select from two or more settings, use the pointer
button or arrow buttons to highlight the desired setting, then
press Enter.
5. Press the Esc button to return to the previous menu or to close
the menu system if you are at the main menu. Your changes are
saved automatically.
6. Press the Menu button to exit the menu system.
52 Fine-tuning the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Colors and Clarity
The Image menu lets you make adjustments to the colors of the
projected image and fine-tune brightness, contrast, and sharpness.
The options available depend on which image source is selected:
Computer (analog-RGB) and RGB video
Component, composite, and S-Video
Follow these steps to adjust the appearance of your image:
1. Press the Menu button. You see the main menu.
2. Press Enter to select the Image menu.
Fine-tuning the Projector 53
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Use the
pointer button (or the up and down arrow buttons)
and press Enter to select any of the following options:
■
Color Mode
Corrects the vividness of image color. You can select from the
following settings, and save a different one for each computer
and/or video source:
Photo: For projecting still images with vivid color in a bright
room (Computer input only).
Sports: For watching TV in a bright room (component,
S-Video, or composite video input only).
Presentation: For presentations in a bright room.
Theatre: For optimizing movie images with natural color in a
dark room (the default for video or S-Video display).
Game: For playing video games in a bright room.
sRGB: For standard sRGB computer displays (the default
when projecting from a computer with analog video).
Blackboard: Fixed color mode for projecting against a green
blackboard.
■
■
■
■
Brightness
Lightens or darkens the overall image.
note
You can also select High or
Low brightness mode in the
Contrast
Adjusts the difference between light and dark areas.
Color Saturation (component, composite, and S-Video)
Adjusts the depth or intensity of the image colors.
Tint (component, composite, and S-Video)
Adjusts the balance of green to magenta in the image.
54 Fine-tuning the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
Sharpness
Sharpens or softens the image.
Color Temp.
Adjusts red and blue tones. A lower color temperature
produces an image with more red (warmer tones), while a
higher color temperature produces an image with more blue
(cooler tones).
■
Color Adjustment
Adjusts the intensity of red, green, and blue.
4. When the image is set correctly, press Esc or Menu. Your settings
are automatically saved.
Fine-tuning the Projector 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Input Signal
Although the projector normally detects and optimizes the input
signal automatically, you can use the Signal menu to make manual
adjustments. In addition to changing the position of the projected
image, you can correct tracking and sync for computer images, or
change the aspect ratio to widescreen format for video images.
1. Press the Menu button. You see the Image menu.
2. Select the Signal menu. You see one of the following screens:
Computer (analog-RGB) and RGB video
Component video
Composite video and S-Video
56 Fine-tuning the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press Enter. Then use the
pointer button (or up and down
arrow buttons) and the Enter button to select any of the
following options:
■
Auto Setup (computer images)
Leave this setting ON to automatically optimize the computer
image. Turn it off if you want to save adjustments you have
made to the video settings.
■
Tracking (computer images)
Removes unwanted vertical lines from a computer image by
matching the projector’s internal clock to various computer
signals. See page 88 for more information about adjusting the
tracking.
■
Sync (computer images)
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
See page 88 for more information about adjusting the sync
setting.
note
If you have repositioned the
image but then change your
mind, you can press the
Auto button on the remote
control to restore the default
settings.
■
■
Position
Use the
pointer button or arrow buttons to move the
image on the screen left, right, up, or down.
Progressive
Leave this setting ON when viewing S-Video or composite
video so that interlaced-to-progressive conversion is carried
out (best for fast-moving pictures). If you notice flickering
while viewing still images, switch this setting to OFF.
■
Computer Input
Selects the signal from equipment connected to the
Computer(Component Video) port. If your image colors
look wrong, try changing this setting from Auto to one of the
following: RGB for computer or RGB video sources, or
Component Video for component video sources.
Fine-tuning the Projector 57
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
Video Signal (composite and S-Video)
Leave this setting at Auto unless you are using a 60-Hz PAL
system (select PAL60).
Resize (video)
Sets the image’s aspect ratio (ratio of width to height) to 4:3
for letterbox video content and to 16:9 for widescreen video
content.
4. When you’re finished adjusting the signal settings, press Esc or
Menu.
Customizing Projector Features
The Settings menu lets you customize the way you use the projector,
from adjusting lamp brightness and speaker volume to changing the
shape of the mouse pointer.
1. Press the Menu button.
2. Select the Settings menu.
58 Fine-tuning the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press Enter. Then use the
pointer button (or up and down
arrow buttons) and the Enter button to set the following options:
■
■
Keystone
Adjusts a distorted image from a trapezoid shape to
rectangular.
Operation Lock
note
When turned on, this function disables all projector buttons
except the P Power button. Changes to this setting take
effect after you restart the projector. (After you turn off the
projector, wait for the Ppower light to turn a steady orange
before turning it on again.)
To cancel the Operation
Lock function from the
projector, press the Enter
button for about seven
seconds.
■
■
Pointer Shape
Lets you select from three different pointer shapes. The
Password Protect function must be cancelled first. See
Brightness Control
Select Low lamp brightness when the projection is too bright
for the room. The Low setting also reduces electricity
consumption and fan noise. Select High to project the
maximum brightness. (Also check the Brightness setting in
■
Volume
Adjusts the volume for the projector’s speaker.
4. When you’re finished, press Esc or Menu.
Fine-tuning the Projector 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Projector Setup Options
Use the Extended menu to customize the way you set up the
projector. You can configure the projector for rear and/or ceiling
projection, change the language for the menus and messages, set the
screen background color, and capture and store a custom image or
logo for the startup screen.
1. Press the Menu button.
2. Select the Extended menu. You see the features and their settings
on the right side:
3. Press Enter. Then use the
pointer button (or the up and down
arrow buttons) and the Enter button to set the following options:
■
Display
Message: Lets you turn screen messages on or off.
note
Background Color: Sets the screen background to Black,
Blue, or Logo when the A/V Mute button is pressed.
The Startup Screen option
cannot be turned off if the
User’s Logo Protect feature
has been turned on. See
Startup Screen: Enables or disables display of the startup
screen when the projector is turned on.
■
User’s Logo
Turn on to display the image or logo you have captured
information.
60 Fine-tuning the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
■
Projection
Front: Projector is in front of the screen.
Front/Ceiling: Projector is in front of the screen, mounted
upside-down from the ceiling.
Rear: Projector is behind the screen.
Rear/Ceiling: Projector is behind the screen, mounted
upside-down from the ceiling.
■
Operation
note
When Direct Power
is turned on, press the
P Power button to turn
the projector off, wait until
the P power light turns a
steady orange, then unplug
the power cord.
Direct Power: When this feature is enabled, projection starts
as soon as you plug in the power cord. You don’t have to
press the P Power button.
Sleep Mode: When Sleep Mode is on, the projector turns
off the lamp if it has not received any input signals for 30
minutes.
High Altitude Mode: When using the projector at an
altitude above 4,921 feet, turn this setting on to ensure that
the internal temperature of the projector is regulated
properly. Turn this setting off for lower elevations.
■
Link 21L
Turn this setting on only if you’re controlling the projector
from a computer with the EMP Link 21L software. This
software can be downloaded from the Epson website at
support.epson.com. (You must turn the projector off and
then on again to use the new setting.)
■
Language
Select the language to be used for the projector menus.
4. When you’re finished, press Esc or Menu.
Fine-tuning the Projector 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Lamp Usage and Other
Information
Use the Info menu to view information about the display settings of
your computer and the number of hours the lamp has been used.
note
You can make changes to
many of the signal settings on
the Signal menu. See page 56
for details.
1. Press the Menu button and select the Info menu. You see one of
the following menus:
Computer (analog RGB, digital RGB, RGB
Video/Component video, YCbCr, YPbPr)
note
The lamp usage timer doesn’t
register until you’ve used the
lamp for at least 10 hours.
Video (Composite video, S-Video)
■
Lamp Hours
Displays the number of hours the lamp has been used. The
life span of the lamp ranges from about 2000 hours in High
brightness mode to about 3000 hours in Low brightness
mode. If the number shown is close to 2000 or the
information is displayed in red, make sure you have a spare
lamp handy.
62 Fine-tuning the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
■
■
■
■
Source
Displays the input source currently being projected.
Input Signal (computer, RGB video, and component video)
Displays the input signal setting.
Resolution (computer, RGB video, and component video)
Displays the input resolution.
Video Signal (composite and S-Video)
Displays the video signal format.
Refresh Rate (computer, RGB video, and component video)
Displays the refresh rate.
Sync Info (computer, RGB video, and component video)
Provides information that may be needed by the service
technician.
2. When you’re finished, press Esc or Menu.
Using the Projector’s Security Features
To prevent unauthorized use of the projector, you can do the
following:
■
■
■
Create an identifying user logo that is displayed at startup and/or
when the A/V Mute button is pressed
Assign a password; this can be disabled for a set period if you want
to loan the projector to someone
Disable the projector’s buttons; this is useful, for example, if
you’re projecting in a classroom and you want to ensure that no
one touches the projector’s buttons while you’re using the remote
control
If you create a user’s logo for the projector, you can lock the logo on so
it is displayed as the startup screen and/or AV/Mute screen.
Unauthorized users cannot turn it off or change it. This feature is
intended to discourage theft and provides a way to identify the
projector should it be stolen.
Fine-tuning the Projector 63
Download from Www.Somanuals.com. All Manuals Search And Download.
If you assign the projector a password, a screen appears requesting the
password whenever the projector is turned on. If you enter the
password incorrectly three times in succession, the projector’s
operation is locked and you’ll need to disconnect the power cord, then
reconnect it to redisplay the password screen. If an incorrect password
is entered 30 times in a row, the projector is locked and you’ll need to
note
If you should happen to
enable the password before
you set one and you see the
prompt to enter the
If someone else will be using the projector for awhile but you want to
make sure that person returns it by a certain time, you can temporarily
disable the password for a set period. When that time has elapsed, the
password is reactivated and must be entered before the projector can
be used.
password, enter the default
password 0000 to proceed.
When you enable the Operation Lock feature, all of the projector’s
buttons are disabled except the P Power button.
Creating Your Own Screen Logo
You can transfer any image on your computer to the projector, and
then use it as the startup screen and/or the screen that is displayed
when you press the A/V Mute button. The image can be a company
logo, slogan, photograph, or any other image you want to use. The
projector considers this image the “User’s Logo.”
Follow these steps to capture the image and transfer it to the projector:
1. Display the image you want to use on the projector. You can use
an image from either a computer or video source, such as a VCR.
2. Press the Menu button and select the Extended menu.
note
If the User’s Logo Protect
function is ON, you see a
message that the logo cannot
be recorded. You’ll need to
disable the User’s Logo
Protect function before you
can create or change the
User’s Logo. See page 66.
64 Fine-tuning the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Use the
pointer button (or the down arrow button) and press
Enter to select User’s Logo.
4. When you see a message asking if you want to use the present
image as a user’s logo, select Yes and press Enter. A selection box
displays over the image.
5. Use the
pointer button on the remote control or the arrow
buttons on the projector to select the area of the image you want
to use. Once you have selected the area, press Enter.
6. When you see the message Select this image?, choose Yes and
press Enter. If you want to change the area selected, select No,
press Enter and repeat steps 5 and 6.
7. When you see this screen, select a zoom rate (display size), and
then press Enter.
note
The default setting for the
Startup Screen option in
the Display menu is ON. If
the Startup Screen is set to
OFF, the logo will not
display at startup.
8. When you see the message Save image as user’s logo?, select
Yes and press Enter. Saving the logo takes a few moments. Do
not use the projector or other sources (computer, video, etc.)
while the logo is being saved.
If the User’s Logo Protect
function has been set to ON,
the Background Color
setting cannot be changed.
You need to turn the protect
function off first. See page 66
for details.
9. When you see the message Completed, press Esc.
10. To display the logo as the background screen when the A/V Mute
button is press, select the Display menu and press Enter.
Once you’ve saved a user’s
logo, you cannot reset the logo
setting to its factory default
(no logo).
11. Select Background Color and press Enter. Then select Logo and
press Enter.
12. When you’re finished, press Menu to exit the menus.
Fine-tuning the Projector 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting a Password
1. Press the Freeze button on the remote control for about 7 seconds
until you see the Password Protect menu:
note
If a password has already
been set, you see the
Password Protect Release
screen. See “Starting the
2. Select Password and press Enter. You see the message Change
the password?
3. Select Yes and press Enter.
4. Hold down the Num key on the remote control and use the
Hold down this button to
activate the numeric
keypad
numeric keypad to enter a 4-digit password.
The password will be displayed as ****. After you enter the last
digit, a confirmation screen appears. Enter the password again.
5. After you finish setting the password, press the Esc button to
return to the Password Protect menu.
Make a note of the password and keep it in a safe place in case you
forget it.
Turning On the Password and User’s Logo
1. Press the Freeze button on the remote control for about 7
seconds until you see the Password Protect menu.
2. To enable the password, select Power ON Protect and press
Use these buttons like a
numeric keypad to enter
the password
Enter. Select ON then press Esc.
3. If you want to disable the password temporarily, select Timer and
press Enter. Then hold down the Num button while you use the
numeric keypad to enter the number of hours (from 0 to 9999)
that you want the password feature disabled. If you want the
projector to request the password every time it is turned on, set
the timer to 0H.
66 Fine-tuning the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
The countdown for the elapsed time begins as soon as you close
the Password Protect menu. (You can check the elapsed time in
this menu next to Time elapsed.)
4. To enable your screen logo, select User’s Logo Protect and press
Enter. Select ON and press Enter.
When this feature is on the logo appears whenever the projector is
turned on (if the Startup Screen is enabled in the Extended
menu; see page 60) and as the A/V Mute screen (if you selected
the Logo as the Background Color in the Extended menu).
None of the User’s Logo features can be changed when the User’s
Logo Protect function is enabled.
5. Press Menu to close the Password Protect menu.
If you lose the remote control, you will not be able to enter the
password, so keep the remote control in a safe place at all times.
When the period defined in the Time-elapsed setting has passed, and
the password is entered correctly, the elapsed time will be reset to 0
and the countdown will start again. Remember to disable or change
this setting when you need to.
Starting the Projector with a Password
When the password function is enabled, you see this screen when you
turn on the projector:
Press down the Num button on the remote control as you use the
numeric keypad buttons to enter the password. Once you have
entered the password correctly, the password screen closes, and
projection begins.
Fine-tuning the Projector 67
Download from Www.Somanuals.com. All Manuals Search And Download.
If the password is not correct, you see the message Wrong password.
Please try again. If you enter an incorrect password three times in
succession, you see the message The projector’s operation will be
locked. Request code xxxxx and the projector switches to standby
mode for approximately 5 minutes. Write down the request code.
Then disconnect the projector’s power cord from the electrical outlet,
reconnect it, and turn the projector back on.
When you see the Password Protect Release screen again, you can try
to enter the correct password.
If you have forgotten the password, contact Epson with the request
code number that appears in the Password Protect Release screen for
assistance. See “Where To Get Help” on page 92.
If you enter an incorrect password 30 times in succession, the
projector remains locked and you must contact Epson to unlock it.
Disabling the Projector’s Buttons
When you enable the Operation Lock function, all the projector’s
buttons are disabled except for the P Power button.
note
To cancel Operation Lock,
press the projector’s Enter
button for seven seconds.
1. Press the Menu button.
2. Select the Settings menu and press Enter.
3. Use the
pointer button (or up and down arrow buttons) to
select Operation Lock and press the Enter button.
4. Select ON and press Enter.
5. Select Yes and press Enter to confirm the setting.
6. Press the Menu button.
68 Fine-tuning the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Restoring the Default Settings
The Reset menu lets you return most projector menu settings to their
default values. It also lets you reset the lamp hours to their initial
default value; see page 77 for instructions on resetting the lamp timer.
note
The input signal, Video
Signal, User’s Logo, and
Language settings do not
return to their defaults when
you select Reset All. To reset
the input signal or video
signal, use the Reset option
on the Signal menu; see
page 56 for details. To reset
the User’s Logo and
Language settings, use the
Reset option on the
Extended menu; see page 60
for details.
To reset most projector menu settings, select Reset All and press the
Enter button to display the confirmation screen. Select Yes to reset all
the default settings or No to cancel.
Fine-tuning the Projector 69
Download from Www.Somanuals.com. All Manuals Search And Download.
70 Fine-tuning the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Maintaining and
Transporting the Projector
Your projector needs little maintenance. All you need to do on a
regular basis is keep the lens clean. Any dirt or smears on the lens may
show up on your projected image.
warning
Before you clean any
part of the projector,
turn it off and unplug
the power cord. Never
open any cover on the
projector, except the
lamp and filter covers.
Dangerous electrical
voltages in the projector
can injure you severely.
Do not try to service
this product yourself,
except as specifically
explained in this User’s
Guide. Refer all other
servicing to qualified
service personnel.
You also need to periodically clean the air filter and the air intake and
exhaust vents. A clogged air filter or air vent can block ventilation
needed to cool the projector and cause overheating.
The only parts you should replace are the lamp and air filter. If any
other part needs replacing, contact your dealer or a qualified servicer.
This chapter covers the following:
■
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface.
■
■
Use a canister of compressed air to remove dust.
To remove dirt or smears on the lens, use lens-cleaning paper. If
necessary, moisten a soft cloth with lens cleaner and gently wipe
the lens surface.
caution
Do not use glass cleaner
to clean the lens.
Cleaning the Projector Case
Before you clean the case, first turn off the projector and unplug the
power cord.
■
■
■
To remove dirt or dust, wipe the case with a soft, dry, lint-free
cloth.
To remove stubborn dirt or stains, moisten a soft cloth with water
and a mild detergent. Then wipe the case.
Do not use wax, alcohol, benzene, paint thinner, or other
chemical detergents. These can damage the case.
72 Maintaining and Transporting the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Replacing the Air Filter
Clean the air filter and air intake and exhaust vent on the bottom of
the projector after every 100 hours of use. If they are not cleaned
periodically, they can become clogged with dust, preventing proper
ventilation. This can cause overheating and damage the projector.
When the filter and vent are clogged, the projector displays the
message The projector is overheated.
To clean the air filter and air vent, follow these steps:
1. Turn off the projector, allow it to cool down, and unplug the
power cord.
2. Turn the projector upside-down and clean the filter and air intake
vent on the base of the projector.
To clean the filter and air vent, Epson recommends using a small
vacuum cleaner designed for computers and other office
equipment. If you don’t have one, gently clean them using a very
soft brush (such as an artist’s brush).
Air vent
Air filter
If the dirt is difficult to remove or if the filter is torn, replace it.
Contact your dealer or call Epson at (800) 873-7766 to obtain a
new one. The air filter set (part number V13H134A08) contains
two filters. In Canada, please call (800) 463-7766 to locate a
dealer.
Maintaining and Transporting the Projector 73
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Lamp
The projection lamp typically lasts for about 2000 hours of use
(in high brightness mode) or 3000 hours (in low brightness mode). It
is time to replace the lamp when:
note
You can check to see how
many hours the lamp has
■
■
■
The projected image gets darker or starts to deteriorate.
The lamp light is flashing orange.
Turn the projector off when
not in use. Continuous
24-hour-a-day use may
reduce the overall life of this
product.
The message Replace the Lamp appears on the screen when the
lamp comes on. To maintain projector brightness and image
quality, replace the lamp as soon as possible.
Contact your dealer or call Epson at (800) 873-7766 in the United
States for a replacement lamp. Request part number V13H010L34.
In Canada, please call (800) 463-7766 to locate a dealer.
Follow these steps to replace the lamp:
warning
1. Press the P Power button twice to turn off the projector. When
Let the lamp cool before
replacing it. If the lamp
breaks, handle the shards
carefully to avoid injury.
you hear the projector beep twice, unplug the power cord.
2. If the projector has been on, allow it to cool down for at least an
hour (or until the lamp is cool).
3. Use the screwdriver included with the replacement lamp to loosen
the screw holding the lamp cover (the lamp cover is located on top
of the projector).
4. Slide the cover out, then lift it off.
Maintaining and Transporting the Projector 75
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Use the screwdriver to loosen the two screws holding the lamp in
place. (You can’t remove the screws.)
Don’t remove
these screws
6. Hold the lamp as shown and pull it straight out.
note
The lamp(s) in this
product contain mercury.
Please consult your state and
local regulations regarding
disposal or recycling. Do not
put in the trash.
7. Gently insert the new lamp. If it doesn’t fit easily, make sure it’s
facing the correct way.
caution
Do not touch the glass
portion of the lamp assembly.
Touching the glass could
result in premature lamp
failure.
8. Once the lamp is fully inserted, tighten its screws.
note
Be sure to seat the lamp fully
and secure the lamp cover. If
the lamp is not properly
installed or the cover is loose,
the lamp will not turn on.
76 Maintaining and Transporting the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Lower the lamp cover into place. (The opening should be almost
covered, and the top of the cover should be flush with the top of
the projector.) Then slide the cover closed and tighten the screw.
10. Reset the lamp timer as described in the next section.
Resetting the Lamp Timer
You must reset the lamp timer after replacing the lamp to clear the
note
Do not reset the lamp timer if
you have not replaced the
lamp. If you do, the Lamp
Hours will not accurately
reflect the number of hours
that the lamp has been used.
Replace the Lamp warning message. Follow these steps:
1. Connect the power cable and turn on the projector.
2. Press the Menu button on the remote control or projector and
select the Reset menu. Then press Enter. You see the following:
Esc button
3. Select the Lamp-Hours Reset option and press Enter. You see
the following:
Enter button Menu button
Maintaining and Transporting the Projector 77
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select Yes and press Enter.
Menu button
Esc button
5. Press Esc to return to the main menu or the Menu button to exit
the menu system.
Transporting the Projector
The projector contains many glass and precision parts. If you need to
transport it, please follow these packing guidelines to prevent damage
to the projector:
Enter button
■
When shipping the projector for repairs, use the original
packaging material if possible. If you do not have the original
packaging, use equivalent materials, placing plenty of cushioning
around the projector.
note
Epson shall not be liable for
any damages incurred during
transportation.
■
■
When transporting the projector as freight or checked luggage,
first put it in the supplied carrying case, then pack it in a firm box,
using cushioning around the case.
When you are hand-carrying the projector, be sure to use the
supplied carrying case.
78 Maintaining and Transporting the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Using On-Screen Help
If the image doesn’t look right or your audio isn’t working, you can
get help by pressing the ? Help button on the projector or remote
control. The following choices are available:
■
■
■
No signal or image appears on the screen
Problems with sound
Language change
Follow these steps to get help:
1. Press the ? Help button on the remote control or projector. You
Use to select
a problem or
solution
Press to
return to the
last menu
see the help menu.
Press to confirm selection
Press to return
to the last menu
Help button
Press one of these buttons to select a
problem or solution
2. Use the
pointer button on the remote control or the up and
down arrow buttons on the projector to select an option. Then
press the Enter button to select it.
Help button
Press to
confirm
selection
3. Use the
pointer button on the remote control or the up and
down arrow buttons on the projector to highlight the problem
you want to solve. Then press the Enter button to view the
solution(s).
80 Solving Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Highlight a solution (if this choice is available). Then press the
Enter button to select the solution.
Press the Esc button if you need to back up.
If the solution is to adjust one of the settings, use the
pointer
button on the remote control or the left and right arrow buttons
on the projector to adjust it.
5. To exit the Help system, press the ? Help button.
If none of the suggestions solves your problem, see additional
solutions to problems in the following sections.
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status and
let you know when a problem occurs.
Lamp light
Power light
Temperature light
If the projector is not working correctly, first turn it off and unplug it.
Then plug the power cord back in and turn on the projector. If this
does not solve the problem, check the status lights on top of the
projector and try the solutions recommended in the following table.
Solving Problems 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Power
light
Lamp
light
Temperature
light
Description
Red
Red
Red
Flashing red
Flashing red
Flashing red
Off
There is an internal error in the projector. Turn the
projector off and unplug it. Contact Epson for
help.
Off
There is a problem with the fan or a sensor. Turn
the projector off and unplug it. Contact Epson for
help.
Flashing red
The lamp is burned out, broken, or not installed
correctly; or the lamp cover is open. Close the
cover or replace or reseat the lamp, if necessary,
don’t work, contact Epson.
—
Flashing orange Off
Replace the lamp with a new one as soon as
continue to use the lamp, there is a risk it may
break.
Red
Off
Off
Red
The projector has overheated and turned itself
off. Let it cool for about five minutes, then turn it
back on. Make sure there is plenty of space
around and under the projector for ventilation.
Also clean the air filter and air exhaust vents. See
page 73. If it continues to overheat, you may
need to replace the air filter.
Flashing red
Flashing orange
The projector is too hot. Make sure the
temperature surrounding the projector does not
exceed 95 °F (35 °C) and there is plenty of space
around and under the projector for ventilation.
Clean the air filter and air vents, if necessary. See
Orange
Off
Off
Off
Off
The projector is in standby or sleep mode. You
can unplug it or press the P Power button to
turn it on.
Flashing
green
The projector is warming up. Wait for the image
to appear.
Green
Off
Off
Off
Off
The projector is operating normally.
Flashing
orange
The projector is shutting down. Wait for the light
to stop flashing and remain orange before
unplugging it.
82 Solving Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Problems with the Image or
Sound
No image appears on the screen.
■
Check that the power light is green, not flashing, and the lens cap
is off.
■
The projector may be in standby or sleep mode. If the projector
has not received any input signal for 30 minutes, it turns off the
lamp to conserve the lamp life and save energy. If the power light
is orange, press the P Power button to turn the projector on.
■
■
Press the A/V Mute button to make sure the picture has not been
turned off temporarily.
If the power was switched off and then on again, wait until the
power light stops flashing and remains orange; then press the P
Power button again.
■
Check the Video Signal or Computer Input setting in the
Signal menu to make sure it is correct for the selected source. See
page 56 for more information.
■
■
Have messages been turned off in the Display setting of the
Adjust the Brightness setting on the Image menu or select High
for the Brightness Control setting in the Extended menu. See
■
The attached computer may be in sleep mode or displaying a
black screen saver. Try pressing a key on the computer.
Nothing appears on the external monitor.
■
Make sure the VGA computer cable is connected to your
computer’s video port and the projector’s
Computer(Component Video) port. Make sure the cable from
your monitor is connected to the projector’s Monitor Out port.
Solving Problems 83
Download from Www.Somanuals.com. All Manuals Search And Download.
You see a blue screen with the message No Signal displayed.
■
■
■
Make sure the cables are connected correctly, as described in
Make sure the power to your computer or video source is
turned on.
If you’ve connected a computer and one or more video sources,
you may need to press the Source Search button on the
projector or the Comp, S-Video, or Video button on the remote
control to select the correct source. Allow a few seconds for the
projector to sync up after pressing the button.
■
If you’ve connected a laptop computer, make sure it’s set to
display on an external monitor. See page 35.
If you’re using a PC laptop:
■
Hold down the Fn key and press the function key that lets you
display on an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD. Allow a few seconds for
the projector to sync up after pressing it. Check your laptop’s
manual or online help for details.
On most systems, the
or CRT/LCD key lets you toggle
between the LCD screen and the projector, or display on both at
the same time.
■
Depending on your computer’s video card, you might need to use
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer’s documentation or online help for details.
If you’re using a PowerBook or iBook with
Macintosh OS X:
1. From the Apple menu, select System Preferences, then click
Display or Displays.
2. Select VGA Display or Color LCD, click Arrange or
Arrangement, then put a check mark in Mirror Displays.
84 Solving Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
If you’re using a PowerBook or iBook with
Macintosh OS 9:
1. From the Apple menu, select Control Panels, then click
Monitors or Monitors and Sound.
2. Click the Arrange icon.
3. Drag one monitor icon on top of the other. This lets you display
on the projector screen as well as the LCD screen.
4. If the Arrange icon isn’t available, click the Monitor icon.
5. Select one of the listed Simulscan resolutions. (Allow a few
seconds for the projector to sync up after making the selection.)
The message Not Supported is displayed.
■
Make sure your computer’s resolution doesn’t exceed XGA and
the frequency is supported by the projector. See page 98. If
necessary, change your computer’s resolution setting as described
below.
■
Make sure the correct Video Signal is selected in the Signal
Only part of the computer image is displayed.
■
If you’re projecting from a computer or RGB video device, press
the Auto button on the remote control. If this doesn’t work or if
you’re projecting from a component, composite, or S-Video
device, you may need to adjust the Position setting in the Signal
■
■
If you’ve enlarged part of the image using the E-Zoom button
on the remote control, press the Esc button to cancel zooming
and return to full display.
Try pressing the Resize button on the remote control to select a
different aspect ratio (ratio of length to height).
Solving Problems 85
Download from Www.Somanuals.com. All Manuals Search And Download.
■
Make sure your computer’s resolution setting is correct. Ideally,
it should be 1024 × 768 to match the projector’s native
resolution. If this option isn’t available, select one of the other
compatible video formats listed on page 98.
■
■
■
Windows:
Right-click the desktop, select Properties, click the Settings
tab, and select a different resolution.
Macintosh OS X:
On the Apple menu, choose System Preferences, then
click Display or Displays. Select a different resolution.
Macintosh OS 9.x:
On the Apple menu, choose Control Panels, then click
Monitors or Monitors and Sound. Select a different
resolution.
■
You also may need to modify existing presentation files if you
created them for a different resolution. See your software
documentation for specific information.
The image isn’t rectangular, but trapezoid-shaped.
■
Make sure the projector isn’t placed off to one side of the screen,
at an angle, or the image won’t be rectangular. Place it directly in
front of the center of the screen, facing the screen squarely.
■
If you’ve tilted the projector upward, the image will be broader at
the top. Hold down the
or
buttons on top of the
projector until the image is rectangular.
The image contains static or noise.
■
If you’re using a computer cable longer than 6 feet, or an
extension cable, the image quality may be reduced.
■
Keep your computer and video cables separated from the power
cord as much as possible to prevent interference.
86 Solving Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
The video signal may be split between the computer and the
projector. If you notice a decline in the projected image quality
when the image is displayed simultaneously on your laptop
computer and the projector, turn off the laptop’s LCD display.
If you’re projecting from a composite or S-Video source, check
the Video Signal setting in the Signal menu. In most cases, leave
it set at Auto. If you’re using a 60-Hz PAL video source, change
■
■
Make sure the cables are securely connected at both ends.
■
If you’re projecting from a computer, press the Auto button on
the remote control or the Enter button on the projector to adjust
tracking and sync automatically. If that doesn’t work, try
adjusting the Sync and Tracking settings in the Signal menu. See
The image is blurry.
■
■
■
Adjust the focus using the focus ring.
Make sure the lens cap is off.
There may be dirt or smears on the lens. Clean the lens as
■
Make sure the lens is not fogged by condensation. You may need
to wait before using the projector after moving it from a cold
environment.
■
■
Make sure the projection distance is within the range described on
You should be able to see the effect on the screen immediately.
Solving Problems 87
Download from Www.Somanuals.com. All Manuals Search And Download.
You see vertical stripes or the image still looks blurry after
trying the solutions in the previous section.
■
If you’re projecting from a computer and displaying an image that
contains a lot of fine detail, you may notice one or more vertical
stripes or bands, or some of the characters may look heavy or
blurred. Press the Auto button on the remote control. This resets
the projector’s tracking and sync settings.
■
If further adjustment is needed, you can fine-tune the Tracking
and Sync settings manually using the Signal menu as described
1. Fill the screen with an image containing fine detail when
making these adjustments. For example, in Windows you can
select a pattern to appear as your desktop background. Or try
projecting black text on a white background.
2. Adjust the Tracking to eliminate vertical stripes.
3. Adjust the Sync to increase the sharpness of the image.
The colors of the image are not right.
■
■
■
■
■
Try selecting a different Color Mode. See page 54 for
instructions.
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your laptop or computer
monitor.
If you’re displaying video, adjust the Color Saturation and Tint
Adjust the Brightness and Contrast settings on the Image
Try adjusting the Color Adjustment setting on the Image menu.
Make sure the input signal setting on the Signal menu matches
the signal from the connected device. If the image is too purple
and you’ve connected a computer or RGB video device to the
Computer(Component Video) port, select Computer as the
input source. If you’ve connected a component video device,
select Component Video. If you’re projecting from a composite
video or S-Video source, make sure the correct Video Signal is
88 Solving Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
Check your computer display settings to correct the color balance.
If the image seems dark, the lamp may be nearing time for
replace it, if necessary, as described on page 75.
There is no sound.
■
■
■
Press the
the volume.
button on the remote control or projector to turn up
If you’ve turned off the picture and sound, press the A/V Mute
button on the remote control to turn them on again.
If you’re using a VCR or other video source, make sure its volume
is not turned all the way down or muted. Also, make sure the
■
■
Make sure the audio cable is connected to the correct Audio port.
If your presentation includes computer audio, make sure the
volume control on your computer is not turned all the way down
or muted. Make sure the audio cable is securely connected to both
the projector and your computer’s headphone jack or
audio out jack. See page 23.
■
The wrong source may be selected. Press the Source Search
button on the projector—or the Comp, S-Video, or Video
button on the remote control—to select the correct source.
Solving Problems 89
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Password Problems
You have forgotten the password.
■
Write down the request code that appears in the Password Protect
Release screen and contact Epson. See “Where To Get Help” on
■
If you turned on the password protect feature before setting the
password and no password was set before, try using the default
password: 0000.
The remote control is not available.
You must have the remote control to enter the password. If necessary,
you can purchase a replacement remote control from Epson. See
page 93 for details about ordering.
Solving Problems with the Remote
Control
The projector doesn’t respond to remote control commands.
■
Make sure you are within 20 feet of the projector, and within
range of the projector’s front or back sensor (approximately 30° to
the left or right and 15° above or below).
■
■
The remote control batteries may not be installed correctly or may
be low on power. Replace the batteries as described on page 48.
Dim the room lights and turn off any fluorescent lights. Make
sure the projector is not in direct sunlight. Strong lighting,
especially fluorescent lights, may affect the projector’s infrared
receivers.
■
Turn off any nearby equipment that emits infrared energy, such
as a radiant room heater.
90 Solving Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
You have lost the remote control.
You need the remote control to access many projector features. If you
about ordering.
You can’t control the mouse pointer with the remote
control.
■
■
■
Make sure the USB mouse cable is securely connected to both
your computer’s USB port and the projector’s USB port. For
Your computer must be connected to the Computer
(Component Video) port on the projector in order to control
your mouse pointer with the remote control.
To use the USB mouse connection on a PC, your system must
have a “clean” installation of Windows 98, Windows Me,
Windows XP, or Windows 2000. The connection may not work
correctly if your system was upgraded from Windows 95.
■
If you’re running Windows 98 or Me, you may need to install
USB drivers from your Windows CD-ROM. After you install the
drivers, restart both the computer and the projector to
resynchronize the setup.
Solving Problems 91
Download from Www.Somanuals.com. All Manuals Search And Download.
Where To Get Help
Epson provides technical assistance through electronic support
services 24 hours a day, as listed in the following table.
Service
Access
World Wide Web
From the Internet, you can reach Epson’s product
support page at http://support.epson.com.
After selecting your product, you can access
troubleshooting information, download product
documentation, and receive technical advice
through e-mail.
Presenters Online
Access tips, templates, and training for
developing successful presentations at
http://www.presentersonline.com
Telephone Support Services
To use the Epson PrivateLine Support service, call (800) 637-7661
and enter the PIN on the Epson PrivateLine Support card included in
your Start Here kit. This is the fastest way of speaking to a live
representative, and it’s free. This service is available 6 AM to 6 PM,
Pacific Time, Monday through Friday, for the duration of your
warranty period.
You may also speak with a projector support specialist by dialing one
of these numbers:
■
U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday
through Friday
■
Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday
through Friday
Toll or long distance charges may apply.
92 Solving Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you call, please have the following information ready:
■
■
■
■
Product name (Epson PowerLite 76c)
Product serial number (located on the bottom of the projector)
Computer or video configuration
Description of the problem
You can purchase video cables, screens, carrying cases, or other
accessories from an Epson authorized reseller. Please call
800-GO-EPSON (800-463-7766) for product information and to
find the nearest authorized reseller. To purchase online, visit the
Epson StoreSM at www.epsonstore.com (U.S. sales only). In Canada,
please call (800) 463-7766 for dealer referral.
note
To purchase a replacement
remote control, call
(562) 276-4394 (U.S.) or
(905) 709-3839 (for dealer
referral in Canada).
Solving Problems 93
Download from Www.Somanuals.com. All Manuals Search And Download.
94 Solving Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
A
Technical Specifications
General
Type of display
Poly-silicon TFT active matrix with MLA
F=1.6, 18.4 to 22.12 mm
Lens
Resolution
1024 × 768 pixels (XGA)
Color reproduction
Brightness (ANSI)
Full color, 16.77 million colors
2000 lumens (High brightness mode)
1500 lumens (Low brightness mode)
Contrast ratio
400:1
Image size
30 to 300 inches (0.8 to 7.6 meters)
2.8 to 35.4 feet (0.9 to 10.8 meters)
Front, rear, ceiling
Projection distance
Projection methods
Focus adjustment
Zoom adjustment
Manual
Manual
Internal sound system 1 W monaural
Optical aspect ratio
Zoom ratio
4:3 (horizontal:vertical)
1:1.2
Noise level
36 dB (High brightness mode)
30 dB (Low brightness mode)
Keystone correction
angle
30° vertical (maximum)
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Projection Lamp
Power consumption
note
170 W UHE
Lamp life results vary
depending on environmental
conditions and usage.
Turn the projector off when
not in use. Continuous
24-hour-a-day use may
reduce the overall life of the
product.
Lamp life
About 2000 hours (High brightness);
3000 hours (Low brightness)
Remote Control
Range
20 feet (6 meters)
Alkaline AAA
Batteries (2)
Mouse Compatibility
Supports USB
Dimensions
Height
3.4 to 3.9 inches (foot extended)
(86 to 98 mm)
Width
Depth
Weight
12.9 inches (327 mm)
9.7 inches (246 mm)
5.7 lb (2.6 kg)
Electrical
Rated frequency
50/60 Hz
Power supply
100 to 120 VAC, 2.9 A
200 to 240 VAC, 1.2 A
Power consumption
Operating: 250 W
Standby: 4 W
96 Technical Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental
Temperature
Operating: 41 to 95 °F (5 to 35 °C)
Storage: 14 to 140 °F (–10 to 60 °C)
Humidity
Altitude
Operating: 20 to 80% RH,
non-condensing
Storage: 10 to 90% RH,
non-condensing
Up to 4,921 feet (1,500 m)
Up to 7,500 feet (2,286 m) with high
altitude mode enabled
Safety and Approvals
United States
FCC 47CFR Part15B Class B (DoC)
UL60950 Third Edition
Canada
ICES-003 Class B
CSA C22.2 No. 60950 (cUL)
CE Marking
Directive 73/23/EEC, 89/336/EEC
IEC60950 Third Edition
EN 55022, EN 55024
Pixelworks™ DNX™ ICs are used in this
projector.
Technical Specifications 97
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatible Video Formats
You can use any of the following video sources: VCR, DVD player,
camcorder, digital camera, gaming console, or laser disc player. The
projector supports composite video, S-Video, component video, and
RGB video, and it automatically senses the video format (HDTV,
SDTV, NTSC, PAL, or SECAM).
The projector supports these international video standards:
Mode
Refresh Rate (Hz)
NTSC
NTSC 4:3
PAL
M-PAL
N-PAL
PAL60
SECAM
60
60
50
60
50
60
50
TV525i
TV625i
60
50
60
50
60
50
60
50
SDTV480p
SDTV480p
HDTV720p
HDTV720p
HDTV1080i
HDTV1080i
98 Technical Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatible Computer Display Formats
You can connect the projector to a wide range of computers, including
PCs and notebooks, Apple Macintosh, Power Macintosh series
(including G3, G4 and G5 systems), PowerBook computers, many
iMac and iBook series systems, and high-end workstations such as the
Sun® SPARCstation™.
Although images are displayed at the projector’s native resolution of
1024 × 768 pixels, Epson’s patented SizeWise chip supports computer
display formats ranging from VGA through UXGA.
To project images output from a computer, the computer’s external
monitor signal must be set at a refresh rate (vertical frequency) that’s
compatible with the projector; see the following table for compatible
formats. For best results, the computer’s resolution should be set to
match the projector’s native resolution (1024 × 768). If this resolution
isn’t available, select one of the other compatible formats:
■
Windows:
Right-click the desktop, select Properties, click the Settings tab,
and select a compatible resolution. (For a notebook displaying
through an external monitor port, you’ll need to click the
Advanced button on the Settings tab, then adjust the resolution
of the external monitor.)
■
Macintosh OS X:
From the Apple menu, select System Preferences, then click
Displays. Make sure the VGA Display or Color LCD dialog box
is selected, then click the Display tab and select a compatible
resolution.
■
Macintosh OS 9.x:
On the Apple menu, choose Control Panels, then click
Monitors or Monitors and Sound. Click the Monitor tab and
select a compatible resolution for your external monitor.
You may need to modify existing presentation files if you created them
for a different resolution. See your software documentation for details.
Technical Specifications 99
Download from Www.Somanuals.com. All Manuals Search And Download.
The projector supports these monitor display formats:
Mode
Refresh Rate (Hz)
Resolution
VGA EGA
70
640 × 350
VGA—60
VESA—72
VESA—75
VESA—85
60
72
75
85
640 × 480
640 × 480
640 × 480
640 × 480
SVGA—56
SVGA—60
SVGA—72
SVGA—75
SVGA—85
56
60
72
75
85
800 × 600
800 × 600
800 × 600
800 × 600
800 × 600
XGA—60
XGA—70
XGA—75
XGA—85
60
70
75
85
1024 × 768
1024 × 768
1024 × 768
1024 × 768
SXGA1—70
SXGA1—75
SXGA1—85
70
75
85
1152 × 864
1152 × 864
1152 × 864
SXGA2—60
SXGA2—75
SXGA2—85
60
75
85
1280 × 960
1280 × 960
1280 × 960
SXGA3—60
SXGA3—75
SXGA3—85
60
75
85
1280 × 1024
1280 × 1024
1280 × 1024
SXGA+60
SXGA+75
SXGA+85
60
75
85
1400 × 1050
1400 × 1050
1400 × 1050
UXGA—60
60
1600 × 1200
iMAC VGA
iMAC SVGA
iMAC XGA
MAC13
MAC16
MAC19—60
MAC19
117
95
75
67
75
59
75
75
640 × 480
800 × 600
1024 × 768
640 × 480
832 × 624
1024 × 768
1024 × 768
1152 × 870
MAC21
100 Technical Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
B
Notices
This chapter includes safety instructions and other important information
about your Epson PowerLite projector.
Important Safety Instructions
Follow these safety instructions when setting up and using the projector:
■
■
■
Do not place the projector on an unstable cart, stand, or table.
Do not use the projector near water or sources of heat.
Use the type of power source indicated on the projector. If you are not
sure of the power available, consult your dealer or power company.
■
■
■
Place the projector near a wall outlet where the plug can be easily
unplugged.
Insert the projector’s two-wire plug into a properly grounded outlet.
Do not hold the plug with wet hands.
Take the following precautions for the plug. Failure to comply with
these precautions could result in sparks or fire: Do not insert the plug
into an outlet with dust present. Insert the plug firmly into the outlet.
■
■
■
■
Do not overload wall outlets, extension cords, or integral convenience
receptacles. This can cause fire or electric shock.
Do not place the projector where the cord can be walked on. This may
result in fraying or damage to the plug.
Unplug the projector from the wall outlet before cleaning. Use a damp
cloth for cleaning. Do not use liquid or aerosol cleaners.
Do not block the slots and openings in the projector case. They provide
ventilation and prevent the projector from overheating. Do not operate
the projector on a sofa, rug, or other soft surface, or in a closed-in
cabinet unless proper ventilation is provided.
■
Never push objects of any kind through the cabinet slots. Never spill
liquid of any kind into the projector.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
Except as specifically explained in this User’s Guide, do not attempt to
service this product yourself. Refer all servicing to qualified personnel.
Opening or removing covers may expose you to dangerous voltages and
other hazards.
Unplug the projector from the wall outlet and refer servicing to qualified
service personnel under the following conditions: When the power cord
or plug is damaged or frayed. If liquid has been spilled into the
projector, or if it has been exposed to rain or water. If it does not operate
normally when you follow the operating instructions, or if it exhibits a
distinct change in performance, indicating a need for service. If it has
been dropped or the housing has been damaged.
■
The lamp(s) in this product contain mercury. Please consult your
state and local regulations regarding disposal or recycling. Do not put
in the trash.
■
■
■
Unplug the projector during lightning storms or when it will not be used
for extended periods.
Do not place the projector and/or remote control on top of
heat-producing equipment or in a hot location.
If you use the projector in a country other than where you purchased it,
use the correct power cord for that country.
■
■
Do not stand on the projector or place heavy objects on it.
Do not use the projector outside of the required temperature range of
41 to 95 °F (5 to 35 °C). Doing so may cause an unstable display and
could lead to projector damage.
■
Do not store the projector outside of the required temperature range of
14 to 140 °F (−10 to 60 °C) or in direct sunlight for long periods of
time. Doing so may cause damage to the case.
WARNING: The cords included with this product contain chemicals,
including lead, known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling. (provided in accordance
with Proposition 65 in Cal. Health & Safety Code § 25249.5 et seq).
102 Notices
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Information
You can operate the projector by remote control via a line-of-sight infrared
(IR) receiver at the front and rear of the projector. The projector may not
respond to remote control commands under the following conditions:
■
There is an object between the remote control IR emitter and the IR
receiver on the projector.
■
■
■
■
Ambient light is too bright.
Certain types of fluorescent lighting are used.
A strong light source shines into the IR receiver.
Other equipment that emits infrared energy, such as a radiant room
heater, is in the room.
These conditions commonly cause problems for most infrared-controlled
equipment. Try the following:
■
■
■
The remote control’s batteries may be low on power; replace them.
Dim the ambient lighting and/or turn off any fluorescent lights.
Close any window coverings and/or move the projector out of direct
sunlight.
■
Turn off other equipment that emits infrared energy.
Notices 103
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
■
■
■
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
■
Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this
equipment will invalidate the FCC Certification or Declaration of this device
and may cause interference levels which exceed the limits established by the
FCC for this equipment. It is the responsibility of the user to obtain and use
a shielded equipment interface cable with this device. If this equipment has
more than one interface connector, do not leave cables connected to unused
interfaces. Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
For Canadian Users
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement
sur le materiel brouilleur du Canada.
104 Notices
Download from Www.Somanuals.com. All Manuals Search And Download.
D
H
I
Image
E
Epson
F
K
G
106 Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Mouse
L
Lamp
N
Laptop computer
O
P
Password
Lens
Logo
Pointer
M
Macintosh
Menus
Positioning
Power
Index 107
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems
Replacing
Projector
S
Safety
Specifications
Q
R
Remote control
Startup screen
108 Index
Download from Www.Somanuals.com. All Manuals Search And Download.
U
User’s Logo
V
T
Video
Temperature
Troubleshooting
W
Z
Index 109
Download from Www.Somanuals.com. All Manuals Search And Download.
110 Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|