4-088-416-42 (1)
R
100 Hz
Projection TV
GB
Instruction Manual
KP-44PX2U
©2002 by Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for choosing this Sony 100 Hz Projection TV.
Before operating the projection TV, please read this manual thoroughly and retain it for future reference.
• Symbols used in the manual:
•
•
Important information.
Information on a feature.
•
•
Shaded buttons on the remote control show you the buttons you have
to press to follow the sequence of the instructions.
• 1,2... Sequence of instructions.
Informs you of the result of the instructions.
Table of Contents
Notice for Customers in the United Kingdom ................................................................................................................................................2
Introduction..........................................................................................................................................................................................................3
Safety Information...............................................................................................................................................................................................4
Overview
Overview of Remote Control Buttons ..............................................................................................................................................................5
Overview of TV Buttons ....................................................................................................................................................................................6
Installation
Connecting the Aerial and VCR .......................................................................................................................................................................7
Inserting Batteries into the Remote Control ....................................................................................................................................................7
GB
First Time Operation
Switching On the TV and Automatically Tuning ..........................................................................................................................................8
Adjusting Colour Registration (Convergence)..............................................................................................................................................10
Menu system
Introducing and Using the Menu System......................................................................................................................................................10
On Screen Display Menus Guide ....................................................................................................................................................................11
Menu Guide:
Picture Adjustment........................................................................................................................................................................................12
Sound Adjustment .........................................................................................................................................................................................12
Sleep Timer .....................................................................................................................................................................................................13
Auto Format....................................................................................................................................................................................................13
AV3 Output.....................................................................................................................................................................................................13
PIP Input..........................................................................................................................................................................................................14
PIP Position.....................................................................................................................................................................................................14
Language.........................................................................................................................................................................................................14
Auto Tuning....................................................................................................................................................................................................14
Programme Sorting........................................................................................................................................................................................15
Programme Labels .........................................................................................................................................................................................15
AV Preset.........................................................................................................................................................................................................15
Manual Programme Preset ...........................................................................................................................................................................16
RGB Centring..................................................................................................................................................................................................17
Teletext..................................................................................................................................................................................................................... 18
NexTView................................................................................................................................................................................................................ 19
Additional Information
Connecting Optional Equipment ....................................................................................................................................................................20
Using Optional Equipment ..............................................................................................................................................................................21
SmartLink ...........................................................................................................................................................................................................22
Remote Control Configuration for VCR/DVD.............................................................................................................................................23
Optimum Viewing Area...................................................................................................................................................................................24
Specifications......................................................................................................................................................................................................25
Troubleshooting.................................................................................................................................................................................................26
Televison Channel Guide for United Kingdom............................................................................................................................................27
3
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Never push objects of any kind into the set as
this could result in a fire or electric shock.
Never spill liquid of any kind on the set. If
any liquid or solid object does fall into the
cabinet, do not operate the TV. Have it
checked immediately by qualified personnel.
For environmental and safety reasons, it is
recommended that the TV set is not left in
standby mode when not in use. Disconnect
from the mains.
This set is to operate on a 220-240V AC
supply only. Take care not to connect too
many appliances to the same power socket
as this could result in fire or electric shock.
To prevent fire or shock hazard, do not
expose the TV to rain or moisture.
For your own safety, do not touch any part
of the TV, power lead or aerial lead during
lightning storms.
Do not open the cabinet and the rear cover of
the TV. Refer to qualified service personnel
only.
Never place the TV in hot, humid or
excessively dusty places. Do not install the
TV where it may be exposed to mechanical
vibrations.
To prevent fire, keep inflammable objects or
naked lights (eg candles) away from the TV.
Do not cover the ventilation openings of the
TV For ventilation, leave a space of at least
10cm all around the set.
Clean the screen and cabinet with a soft,
lightly dampened cloth. Do not use any type
of abrasive pad, alkaline cleaner, scouring
powder or solvent, such as alcohol or
benzine, or antistatic spray. As a safety
precaution, unplug the TV before cleaning it.
Take care not to place heavy objects on the
power lead as this could result in damage.
We recommend you wind any excess lead
around the holders provided on the rear of
the TV.
Pull out the power lead by the plug. Do not
pull on the power lead itself.
Unplug the power lead before moving the
TV. Avoid uneven surfaces, quick steps or
excessive force. If the set has been dropped
or damaged, have it checked immediately
by qualified service personnel.
Place the TV on a
Do not cover the ventilation openings of the
TV with items such as curtains or
newspapers etc.
secure stable stand. Do not allow children to
climb on to it. Do not place the TV on its side
or face up.
Additional Safety Information
• After transporting the projection TV directly from a cold to a warm location, or if the room temperature has changed suddenly,
pictures may be blurred or show poor colour over portions of the picture. This is because moisture has condensed on the mirrors
or lenses inside the projection TV. Let the moisture evaporate before using the projection TV.
• To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed
down from the ceiling.
• Displaying a still picture for long periods of time, for instance, when operating a video game or personal computer and viewing a
programme in 16:9 mode, may damage the picture tube. To avoid this, keep the picture contrast level low.
• Avoid touching the screen, and take care not to scratch the surface with hard objects.
• Screen Burn / Image Retention
An “image ghosting”, or “screen burn” may appear on the screen if the television is left operating with, either a still image, or a
programme displaying a bright corner channel logo, for an extended period of time. The risk of this is higher if the set is in “Live”
mode or has a hight contrast setting. This image cannot be removed once burnt onto the screen. To avoid the risk of occurrence do
not leave the television operating on such a picture, or programme for long periods of time. Repeated extended daily usage of the
same image, or programme can also result in this occurrence which is not covered by the Sony warranty.
Safety Information
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of Remote Control Buttons
1To Temporarily Switch Off TV:
@£
Checking the Accessories Supplied
Press this button to temporarily switch off TV (the standby indicator on the TV lights up). Press
again to switch on TV from standby mode.
To save energy we recommend switching off completely when TV is not in use.
After 15 minutes without a signal and without any button being pressed, the TV switches
automatically into standby mode.
1
2
@™
@¡
3
4
2VCR or DVD on/off: Press this button to switch your VCR or DVD on or off.
@º
3Media Selector:
With this remote control you can operate not only this TV but also the main functions of your VCR
or DVD. Switch on the device you want to operate and next press this button repeatedly to select
the VCR, TV or DVD. A green light will be momentarily lit to indicate the chosen function.
Before the first time you want to control a DVD or VCR by using this remote control, you have
to set it up depending on the brand of the device to be used. For more details, refer to the
chapter “Remote Control Configuration for VCR or DVD” on page 23.
5
6
!ª
!•
!¶
!§
7
8
4Selecting input source: Press this button repeatedly until the desired input symbol of the
source appears on the TV screen.
9
!º
5Selecting channels:
If Media Selector is switched to TV or VCR, press this button to select channels.
For double-digit programme numbers, enter the second digit within 2.5 seconds.
!∞
!¢
6a) If Media Selector is switched to TV:
!¡
!™
!£
Press this button to watch the last channel selected (the last channel watched for at least 5
seconds).
b) If Media Selector is switched to VCR:
For Sony’s VCR double-digit programme numbers, e.g. 23, press -/- - first and then the buttons
2 and 3.
GB
7Selecting screen format: Press this button repeatedly to change the format of the screen. For
more details refer to the chapter “Auto Format” on page 13.
8This button only works in Teletext mode.
9Selecting Teletext: Press this button to switch on teletext.
!ºJoystick:
a) If Media Selector is switched to TV:
• When MENU is switched on, use these buttons to operate the menu system. For details refer
to “Introducing and Using the Menu System” on page 10.
• When MENU is switched off, press OK to show a channel overview. Then press
or
to
select the channel and then press again the OK button to watch the selected channel.
b) If Media Selector is switched to VCR or DVD:
Using these buttons you can control the main functions of your VCR or DVD.
!¡Displaying the menu system: Press this button to display the menu on the TV screen. Press again to remove the menu display
from the TV screen.
!™Selecting channels: Press these buttons to select the next or previous broadcast channel.
!£NexTView: For more details refer to chapter “NexTView” on page 19.
!¢Adjusting TV volume: Press these buttons to adjust the volume of the TV.
!∞Recording button: If Media Selector is switched to VCR, press this button to record programmes.
!§Selecting TV mode: Press this button to switch off PIP, teletext or video input.
!¶Selecting Picture mode: Press this button repeatedly to change the picture mode.
!•Selecting Sound effect: Press this button repeatedly to change the sound effect.
!ªDisplaying on Screen information: Press this button to display all on-screen indications. Press again to cancel.
@ºFreezing the picture: Press this button to freeze the picture. The screen is divided into two screens. On the left with the normal
picture, on the right the picture is freezed. Press this button again to return to the normal picture.
@¡Swapping screens: Whilst you are in “PIP” mode, press this button to swap the two screens.
@™PIP (Picture in Picture): Press this button to watch another source in a small picture (PIP) within the main TV picture. Press again
to cancel. To select the source you want to watch, refer to the chapter “PIP Input” on page 14.
@£Muting the Sound: Press this button to mute TV sound. Press again to restore the sound.
Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details,
please refer to the chapter “Teletext” on page 18.
5
Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of Projection TV Buttons
Programme Up or
DownButtons(Select
TV channels)
Volume
control buttons
Press on the
mark
Selecting
Input source
On/Off
switch
.
Standby
indicator
1Auto Convergence
Button:
S video Input jack
Video Input
Press this button to adjust
the colour registration.
For more details, please
refer to the chapter
“Adjusting Colour
Registration
(Convergence)” on page
10.
Audio
Input jacks
or
2Auto Start Up Button:
Headphones jack
Press and hold this
button for approximately
2 seconds to start the auto
start up sequence.
For more details, please
refer to the chapter
“Switching On the
Projection TV and
Automatically Tuning”
on page 8.
6
Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Aerial and VCR
Connecting cables are not supplied.
or
VCR
OUT
IN
Scart lead is optional.
GB
For more details of VCR connection, please refer to the section “Additional information
when connecting equipment” on page 21.
Inserting Batteries into the Remote Control
Make sure you insert the supplied batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
7
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching On the Projection TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language
of the menu screen, 2) search and store all available channels (TV Broadcast) and 3) change the order in which the channels
(TV Broadcast) appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in
the
(Set Up menu) or by pressing the Auto Start Up Button
/
on the TV set.
1 Connect the Projection TV plug to the mains socket (220-240V AC, 50Hz)
The first time that the TV set is connected, it is usually turned on. If the TV is off, press
Language
Language
English
Norge
Français
Italiano
Nederlans
English
Norge
Français
Italiano
Nederlans
the
on/off button on the TV set to turn on the TV.
The first time you switch on the TV, a Language menu displays automatically on the
Select Language:
Confirm: OK
Select Language:
Confirm: OK
TV screen.
Language
2 Press the
or
button on the remote control to select the language, then press the
English
Norge
Français
Italiano
Nederlans
OK button to confirm your selection. From now on all the menus will appear in the
selected language.
Select Language:
Confirm: OK
3 The Auto Tuning menu appears on the screen. Press the OK button to select Yes.
Do you want to start
automatic tuning?
Yes
No
4 The projection TV starts to automatically search and store all available broadcast
channels for you.
Auto Tuning
Programme:
1
C 01
B/G
Channel:
System
This procedure could take some minutes. Please be patient and do not press
any buttons, otherwise automatic tuning will not be completed.
Searching...
In some countries the TV Broadcaster installs the channels automatically (ACI
system). In this case, the TV Broadcaster sends a menu in which you can select
your city by pressing the
or
button and OK to store the channels.
If no channels were found during the auto tuning process then a new menu
appears automatically on the screen asking you to connect the aerial. Please
connect the aerial (see page 7) and press OK. The auto tuning process will start
again.
No channel found
Please connect aerial
Confirm
continued...
8
First Time Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
5 After all available channels are captured and stored, the Programme Sorting menu
automatically appears on the screen enabling you to change the order in which the
channels appear on the screen.
a) If you wish to keep the broadcast channels in the tuned order, go to step 6.
b) If you wish to store the channels in a different order:
Programme Sorting
Programme:
01 TVE2
02 TVE
1 Press the
or
button to select the programme number with the channel (TV
button.
03 ANT3
04 TELE5
05 C+
Broadcast) you wish to rearrange, then press the
06
C44
2 Press the
or
button to select the new programme number position for your
Select Channel
Confirm:
selected channel (TV Broadcast), then press OK.
Programme Sorting
Programme:
01 TVE2 41 TVE
02 TVE
03 ANT3
3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels.
04 TELE5
05 C+
06
C44
Select new position
Move: OK
GB
6 Press the MENU button to remove the menu from the screen.
MENU
Your projection TV is now ready for use.
9
First Time Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Colour Registration (Convergence)
Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the outlines of
the images.
In that case, proceed as follows.
Auto converge the Red, Green, and
Blue Lines
1 Press on the mark
, on the right side of the projection TV.
2 Press
/
button.
The Auto Convergence function works for about 10 seconds. When the white
cross disappears from the screen, your projection TV is ready for use.
The Auto Convergence function does not work when:
• no signal is input.
• the input signal is weak.
• the screen is exposed to spotlights or direct sunlight.
• you watch the teletext broadcast.
• you watch NexTView.
Introducing and Using the Menu system
Your projection TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the
Remote Control to operate the menu system:
MENU
1 Press the MENU button to switch the first level menu on.
Picture Adjustment
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Picture Mode
Contrast
Brightness
Colour
Personal
Sharpness
Reset
Noise Reduction
Select:
Enter Menu:
AUTO
Select:
Enter Menu:
2 • To highlight the desired menu or option, press
or
.
• To enter the selected menu or option, press
• To return to the last menu or option, press
.
.
• To alter the settings of your selected option, press
/
/
or
.
• To confirm and store your selection, press OK.
3 Press the MENU button to remove the menu from the screen.
MENU
First Time Operation - Menu System
10
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen display Menus Guide
Picture Adjustment
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
Refer to the section "Picture Adjustment”, on page 12.
AUTO
AUTO
Select:
Enter:
Select:
Enter Menu:
Sound Adjustment
Sound Adjustment
Effect
Treble
Bass
Balance
Reset
Dual Sound
Auto Volume
TV Speakers
Natural
Effect
Treble
Bass
Balance
Natural
Refer to the section "Sound Adjustment”, on page 12.
Reset
Stereo
Off
On
Stereo
Off
On
Dual Sound
Auto Volume
TV Speakers
Select:
Enter:
Select:
Enter Menu:
Features
Off
Features
Sleep Timer
Auto Format
AV3 Output
PIP Input
On
AUTO
AV1
Off
On
AUTO
AV1
Sleep Timer
Auto Format
AV3 Output
PIP Input
Refer to the section "Sleep Timer" on page 13.
Refer to the section "Auto Format" on page 13.
Refer to the section "AV3 Output" on page 13.
Refer to the section "PIP Input" on page 14.
Refer to the section "PIP Position" on page 14.
Refer to the section "Language" on page 14.
PIP Position
PIP Position
Select:
Enter:
Select:
Enter Menu:
Features
Off
On
Sleep Timer
Auto Format
AV3 Output
PIP Input
AUTO
AV1
PIP Position
Select:
Enter:
Features
Off
On
Sleep Timer
Auto Format
AV3 Output
PIP Input
AUTO
AV1
PIP Position
Select:
Enter:
GB
Features
Off
On
Sleep Timer
Auto Format
AV3 Output
PIP Input
AUTO
AV1
PIP Position
Select:
Enter:
Features
Off
On
Sleep Timer
Auto Format
AV3 Output
PIP Input
AUTO
AV1
PIP Position
Select:
Enter:
Set Up
Set Up
Language
Language
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter:
Select:
Enter Menu:
Set Up
Language
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Refer to the section "Auto Tuning" on page 14.
Select:
Start Auto Tuning:
Set Up
Language
Auto Tuning
Refer to the section "Programme Sorting" on page 15.
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter:
Set Up
Language
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Refer to the section "Programme Labels" on page 15.
Refer to the section "AV Preset" on page 15.
Select:
Enter:
Set Up
Language
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter:
Set Up
Language
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Refer to the section "Manual Programme Preset" on page 16.
Select:
Enter:
Set Up
Detail Set Up
L
a
n
g
ua
g
e
RGB Centring
0
Auto Tuning
Programme Sorting
Refer to the section "RGB Centring"
on page 17.
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Enter Menu:
Select:
Select:
Enter:
Menu System
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Guide
Level 1
Level 2
Level 3 / Function
PICTURE ADJUSTMENT
The “Picture Adjustment” menu allows you to alter the picture
adjustments.
Picture Adjustment
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
To do this: after selecting the item you want to alter press
press repeatedly or to adjust it and finally press OK
to store the new adjustment.
, then
Select:
Enter:
Select:
Enter Menu:
/
/
• This menu also allows you to customise the picture mode based on the programme you are watching:
Picture Mode
Live (for live broadcast programmes, DVD and Digital Set Top Box receivers).
Personal (for individual settings).
Movie (for films).
• Brightness, Colour and Sharpness can only be altered if “Personal” mode is selected.
• Hue is only available for NTSC colour signal (e.g: USA video tapes).
• Select Reset and press OK to reset the picture to the factory preset levels.
• The Noise Reduction option is set to AUTO to automatically reduce the picture noise visible in the broadcast signal. To cancel this function,
select “Off” instead of “AUTO”.
SOUND ADJUSTMENT
The “Sound Adjustment” menu allows you to alter the sound
adjustments.
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
To do this: after selecting the item you want to alter, press . Then
Select:
Enter Menu:
press repeatedly
/
/
or
to adjust it and finally press OK
to store the new adjustment.
Sound Adjustment
Sound Adjustment
Effect
Treble
Bass
Effect
Treble
Bass
Natural
Natural
Balance
Reset
Dual Sound
Auto Volume
TV Speakers
Balance
Reset
Dual Sound
Auto Volume
TV Speakers
Stereo
Off
On
Stereo
Off
On
Select:
Enter:
Select:
Enter Menu:
Effect
Natural: Enhances clarity, detail and presence of sound by using “BBE High Definition Sound system”*.
Dynamic: “BBE High Definition Sound system”* intensifies clarity and presence of sound for better
intelligibility and musical realism.
Dolby**V: Dolby Virtual, simulates the sound effect of “Dolby Surround Pro Logic”.
Off:
Flat response.
Treble
Bass
Less
Less
Left
More
More
Right
Balance
Reset
K
Resets the sound to the factory preset levels.
Dual Sound
• For a stereo broadcast:
Mono.
Stereo.
• For a bilingual broadcast:
Mono (for mono channel if available).
A (for channel 1).
B (for channel 2).
Auto Volume
TV Speakers
Off: volume level changes according to the broadcast signal.
On: volume level of the channels will stay the same, independent of the broadcast signal
(e.g. in the case of advertisements).
On: to listen to the TV from the set speakers.
Off: to listen to the TV from an external amplifier connected to the audio outputs on the rear of the projection
TV set.
• If you are listening to the TV through headphones, the “Effect” option will automatically be switched to “Off”.
• If you select “Dolby Virtual” on the “Effect” option, the “Auto Volume” option will automatically be switched to “Off” and vice versa.
* The “BBE High Definition Sound system” is manufactured by Sony Corporation under license from BBE Sound, Inc. It is covered by
U.S. Patent No. 4,638,258 and No. 4,482,866. The word “BBE” and BBE Symbol are trademarks of BBE Sound, Inc.
** This TV has been designed to create the “Dolby Surround” sound effect by simulating the sound of four speakers with two speakers,
when the broadcast audio signal is Dolby Surround encoded. The sound effect can also be improved by connecting a suitable external
amplifier (for details refer to “Connecting to external audio Equipment” on page 21).
** Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol
Laboratories.
are trademarks of Dolby
continued...
Menu System
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Level 1
Level 2
Level 3 / Function
Picture Adjustment
SLEEP TIMER
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
The “Sleep Timer” option in the “Features” menu allows you to
select a time period for the TV to switch itself automatically into the
standby mode.
Select:
Enter Menu:
To do this: after selecting the option press , then press
set the time period delay (max. of 4 hours).
or
to
Features
Features
Off
On
AUTO
AV1
Sleep Timer
Auto Format
AV3 Output
PIP Input
Off
On
AUTO
AV1
Sleep Timer
Auto Format
AV3 Output
PIP Input
PIP Position
PIP Position
Select:
Enter Menu:
Select:
Enter:
• While watching the TV, you can press the
button on the remote control to display the time remaining.
• One minute before the projection TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically.
Picture Adjustment
AUTO FORMAT
The “Auto Format” option in the “Features” menu allows you to
automatically change the aspect ratio of the screen.
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
To do this: after selecting the option, press . Then press
or
to
Select:
Enter Menu:
select On (if you wish the TV set to automatically switch the screen
format according to the broadcast signal) or Off (if you wish to keep
your preference). Finally press OK to store.
Features
Features
Off
On
AUTO
AV1
Off
On
AUTO
AV1
Sleep Timer
Auto Format
AV3 Output
PIP Input
Sleep Timer
Auto Format
AV3 Output
PIP Input
PIP Position
PIP Position
Select:
Enter:
Select:
Enter Menu:
Even if you have selected “On” or “Off” in the “Auto Format” option, you can always modify the
format of the screen by pressing
formats:
GB
repeatedly on the remote control to select one of the following
Smart
4:3
Smart: Imitation of wide screen effect for 4:3 broadcast.
4:3:
Conventional 4:3 picture size, full picture information.
Compromise between 4:3 and 16:9 picture size.
14:9:
14:9
Zoom
Wide
Zoom: Widescreen format for letterbox movies.
Wide: For 16:9 broadcast. Full picture information.
In “Smart”, “Zoom” and “14:9” modes, parts of the top and bottom of the screen are cut off.
Press
or
to adjust the position of the image on the screen (e.g. to read subtitles).
AV3 OUTPUT
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
The “AV3 Output” option in the “Features” menu allows you to
S
select the source to be output from the Scart connector
3/
3
AUTO
so that you can record from this Scart any signal coming from the
projection TV or from an external equipment connected to the Scart
Select:
Enter Menu:
S
connectors
1/
1 or
2/
2 or side connectors
4 or
4 and
4.
Features
Features
Off
Off
On
AUTO
AV1
Sleep Timer
Auto Format
AV3 Output
PIP Input
Sleep Timer
Auto Format
AV3 Output
PIP Input
On
AUTO
AV1
If your VCR supports Smartlink, this procedure is not
necessary.
PIP Position
PIP Position
Select:
Enter:
Select:
Enter Menu:
To do this: after selecting the option, press . Then press
or
to
select the desired output signal: TV, AV1, AV2, AV4, YC4 or
AUTO.
If you select “AUTO”, the output signal will always be the same one that is displayed on the screen.
S
If you have connected a decoder to the Scart
3/
3 or to a VCR connected to this Scart, please remember to change back
the “AV3 Output” to “AUTO” or “TV” for correct unscrambling.
continued...
13
Menu System
Download from Www.Somanuals.com. All Manuals Search And Download.
Level 1
Level 2
Level 3 / Function
Picture Adjustment
PIP INPUT
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
The “PIP Input” option in the “Features” menu allows you to select
the source you want to watch in the “PIP” screen.
To do this: after selecting the option, press
. Then press
Select:
Enter Menu:
repeatedly
or
to select the desired source AV1, AV2, AV3,
AV4 or TV. Finally press OK to store.
Features
Features
Off
On
Off
On
AUTO
AV1
Sleep Timer
Auto Format
AV3 Output
PIP Input
Sleep Timer
Auto Format
AV3 Output
PIP Input
AUTO
AV1
PIP Position
PIP Position
Select:
Enter:
Select:
Enter Menu:
To watch the “PIP” screen with the selected source, press the
B
B
/
button on the remote control.
A
A
You can swap the screens by pressing the
remote control.
/
button on the
A
B
PIP POSITION
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
The “PIP Position” option in the “Features” menu allows you to
change the position of the “PIP” screen within the main screen.
To do this: after selecting the option press
,
,
or
to select
Select:
Enter Menu:
the desired position. Finally press OK to store.
Features
Features
Off
On
AUTO
AV1
Off
On
AUTO
Sleep Timer
Auto Format
AV3 Output
PIP Input
Sleep Timer
Auto Format
AV3 Output
PIP Input
AV1
PIP Position
PIP Position
Select:
Enter:
Select:
Enter Menu:
LANGUAGE
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
The “Language” option in the “Set Up” menu allows you to select
the language that the menus are displayed in.
To do this: after selecting the option, press
and then proceed in
Select:
Enter Menu:
the same way as in step 2 of the section “Switching On the Projection
TV and Automatically Tuning” on page 8.
Set Up
Set Up
Language
Language
Auto Tuning
Auto Tuning
Programme Sorting
Programme Labels
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter:
Select:
Enter Menu:
AUTO TUNING
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
The “Auto Tuning” option in the “Set Up” menu allows you to
automatically search for and store all available TV channels.
To do this: after selecting the option, press
and then proceed in
Select:
Enter Menu:
the same way as in the steps 3 and 4 of the section “Switching On the
Projection TV and Automatically Tuning” on page 8.
Set Up
Set Up
Language
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Language
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Start Auto Tuning:
Select:
Enter Menu:
continued...
Menu System
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Level 1
Level 2
Level 3 / Function
PROGRAMME SORTING
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
The “Programme Sorting” option in the “Set Up” menu allows you
to change the order in which the channels (TV Broadcast) appear on
the screen.
Select:
Enter Menu:
To do this: after selecting the option, press
and then proceed in
the same way as in step 5 b) of the section “Switching On the
Projection TV and Automatically Tuning” on page 9.
Set Up
Set Up
Language
Language
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter:
Select:
Enter Menu:
PROGRAMME LABELS
The “Programme Labels” option in the “Set Up” menu allows you
to name a channel using up to five characters (letters or numbers).
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
To do this:
Select:
Enter Menu:
1 After selecting the option, press , then press
or
to select
the programme number with the channel you wish to name.
Set Up
Set Up
Language
Language
Auto Tuning
2 Press . With the first element of the Label column highlighted,
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Programme Sorting
Programme Labels
press
or
to select a letter or number (select “-“ for a blank),
to confirm this character. Select the other four
AV Preset
Manual Programme Preset
Detail Set Up
then press
Select:
Enter:
Select:
Enter Menu:
characters in the same way. Finally press OK to store.
GB
Picture Adjustment
AV PRESET
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
The “AV Preset” option in the “Set Up” menu allows you to
designate a name to the external equipment you have connected to
the input sockets of this projection TV.
Select:
Set Up
Enter Menu:
To do this:
1 After selecting the option, press , then press
or
to select
Set Up
Language
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
the input source you wish to name (AV1, AV2 and AV3 are for
Language
Auto Tuning
Programme Sorting
Programme Labels
the rear Scarts and AV4 for side connectors). Then press
.
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter:
2 A label automatically appears in the label column:
Select:
Enter Menu:
a) If you want to use one of the 6 predefined label (CABLE,
GAME, CAM, DVD, VIDEO or SAT), press
the desired label and finally press OK to store.
or
to select
b) If you want to set a different label, select Edit and press
.
Then with the first element highlighted, press
or
to
to
select a letter, number or “-“ for a blank, then press
confirm this character. Select the other four characters in the
same way and finally press OK to store.
continued...
Menu System
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Level 1
Level 2
Level 3 / Function
MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the “Set Up” menu
allows you to:
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Select:
Enter Menu:
Set Up
Set Up
Language
Language
Auto Tuning
Auto Tuning
Programme Sorting
Programme Labels
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter:
Select:
Enter Menu:
a) Preset channels or the VCR channel one by one to the programme order of your choice. To do this:
1 After selecting the ”Manual Programme Preset” option, press then with Programme option highlighted press
.
Press or to select which programme number you want to preset the channel on (for VCR, select programme number
“0”). Then press
.
2 After selecting the Channel option, press
. Then press the number buttons to enter directly the channel number of the
TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press
or
to search for it. When
you tune the desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
b) Label a channel using up to five characters.
To do this: highlighting the Programme option, press the PROG +/- button to select the programme number with the channel
you wish to name. When the programme you want to name appears on the screen, select the Label option and press . Next
press
or
to select a letter, number or “-“ for a blank. Press
to confirm this character. Select the other four characters in
the same way. After selecting all the characters, press OK twice to store.
c) Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture, however you
can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press
or
to adjust the fine tuning between -15 and +15. Finally press OK twice to store.
d) Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
To do this: highlighting the Programme option, press the PROG +/- button to select the programme number you want to skip.
When the programme you want to skip appears on the screen, select the Skip option and press
Yes. Finally press OK twice to confirm and store.
. Next press
or
to select
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
continued...
Menu System
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Level 1
Level 2
Level 3 / Function
Picture Adjustment
RGB CENTRING
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
When connecting an RGB source, such as a “PlayStation”, you may
need to readjust the horizontal position of the picture. If this is the
case, you can adjust it through the “RGB Centring” option in the
“Detail Set Up”.
Select:
Enter Menu:
To do this: while watching an RGB source select the “RGB Centring”
Set Up
Detail Set Up
RGB Centring
option and press
. Then press
or
to adjust the centre of the
L
a
n
g
ua
g
e
0
Auto Tuning
Programme Sorting
picture between –10 and +10. Finally press OK to confirm and store.
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Enter Menu:
Select:
Select:
Enter:
GB
Menu System
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Teletext is an information service transmitted by most TV stations. The index page of the teletext service (usually page 100)
gives you information on how to use the service. To operate teletext, use the remote control buttons as indicated below.
• Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.
• After 5 minutes viewing the same teletext page and without any button being pressed, the brightness level of the picture
automatically decreases notoriously to avoid any damage to the picture tube. Press any button of the remote control to
reset the brightness level.
To switch on Teletext :
After selecting the TV channel which carries the teletext service you
TELETEXT
Index
wish to view, press
.
Programme
News
Sport
25
153
101
98
To select a Teletext page:
Weather
Input 3 digits for the page number, using the numbered buttons.
• If you make a mistake, retype the correct page number.
• If the counter on the screen continues searching, it is because the page is not available.
If this is the case, input another page number
To access the next or preceding page:
Press PROG + ( ) or PROG - ( ).
To superimpose teletext on to the TV:
Whilst you are viewing teletext, press
. Press it again to cancel teletext mode.
To freeze a teletext page:
Press
/
. Press it again to cancel the freeze.
To reveal concealed information (e.g: answer to a quiz):
Press . Press it again to conceal the information.
/
To select a sub page:
A teletext page may consist of several sub pages. In this case the page number that appears on the
upper left corner will change from white to green and one or more arrows will appear next to the page
number. Repeatedly press the
or
buttons on the remote control to watch the desired sub page.
To Switch Off Teletext:
Press
.
Fastext
Fastext service lets you access Teletext pages with one button push.
When you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at the bottom
of the teletext page. Press the appropriate coloured button (red, green, yellow or blue) to access
the page corresponding to your menu choice.
Teletext
18
Download from Www.Somanuals.com. All Manuals Search And Download.
NexTView*
*(depending on availability of service).
NexTView is an on-screen electronic programme guide, providing you with programme information for different
broadcasters.
When looking for information you can search by theme (sports, art, etc...) or date.
If wrong characters appear when viewing NexTView, use the menu system to enter the “Language/Country” menu (see page
14) and select the same language as the NexTView is broadcasted.
Displaying NexTView
1 Select a broadcast channel providing a NexTView service. In this case the indication “NexTView” is displayed as soon as data
is available.
2 To see NexTView service you have two different types of NexTView interface. These depend on the % of available data:
a) “Programme List” interface:
Whilst you are watching TV, and after the indication “NexTView” (coloured white) is displayed on the screen, press the
button on the remote control to watch the “Programme List” interface (see fig. 1).
b) “Overview” interface:
Whilst you are watching TV, and after more than 50% of NexTView data is available (100% data may not be available
depending on the area) the indication “NexTView” (coloured black) is displayed on the screen. Press the
the remote control to watch the “Overview” interface (see fig. 2).
button on
As soon as you enter the NexTView service the % of NexTView data available will be shown in the bottom left corner of
the screen. Once you have entered the service, the % of data will not increase.
3 To navigate through NexTView:
• moving to right or left press
or
.
or
• moving up or downwards, press
• confirming a selection, press OK.
.
GB
4 To switch NexTView off, press the
button on the remote control.
“Programme List” interface (fig. 1):
“Overview” interface (fig. 2):
1
1
01
Mon Tue Wed Thu Fri Sat Sun
9 : 00 9 : 30
Magazine Songs from the shows
Weather Forecast
02 03
04
05
06
07
01
02 03
04
Mon Tue Wed Thu Fri Sat Sun
05
06
07
9 : 15 : 03
10 : 00
7 : 07 : 01
|
TV1
TV2
TV3
TV4
TV5
TV6
TV7
TV8
TV1
TV2
TV3
TV4
TV5
TV6
TV7
TV8
Songs from the shows
Weather forecast informat i
A1 news magazine
Arts show
00 : 30
01 : 30
05 : 30
2
3
2
3
|
Mike's show
|
|
Euronews
Fantasy film
Star Wars
Euro Sports
Magazine
Euro Sports
Euro Sports
Home Shopping Europe Euronews
|
Home Shopping Europe
06 : 30
07 : 30 Oclock news
08 : 30 Weather forecast informat i
09 : 30 A1 news magazine
10 : 30 Arts show
|
News | Arts show
Larry King's live
Euro magazine
|
|
|
Songs from the shows
TV1 00:30 - 01:30 Thursday 04
Programme descriptio n
Songs from the shows
TV1 00:30 - 01:30 Thursday 04
Programme descriptio n
Record
Remind
Record
Remind
4
5
5
4
1 Icons for different themes (see the “Icons’ key” below)
4 Record*
This function only works if you have connected a VCR which
supports SmartLink and Timer Programming feature.
2 Date
If you wish to record the selected programme, press the red button
on the remote control.
3 Programme list
5 Remind*
If you wish to be reminded when the selected programme is broadcast, press
the green button on the remote control. At the time that programme should
be broadcast a reminder message is displayed on the TV.
* “Record” and “Remind” options will be shown on the screen as soon as a programme have been selected, but they will not be shown if
you are watching the NexTView service on a TV channel which is not a NexTView provider.
* “Record” and “Remind” will not be available if the programme that you have selected has already started.
Icons’ key:
full selection list:
music
All the programme information is listed by time and
broadcast channels order.
channel selection:
If the NexTView provider sends information of more than 8
broadcast channels, you can select 8 of them to create your
personal list.
After you have created your personal list, the default list can
be restored. To restore it, select “Auto (” by pressing
button on the remote control.
entertainment
children
arts
sports
remind list:
Shows you the list with all the programmes (maximum 5
programmes) that you have selected to be reminded about.
news
movies
NexTView
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Optional Equipment
Using the following instructions, you can connect a wide range of optional equipment to your projection TV.
S VHS/Hi8
DVC
camcorder
D
C
VCR
8mm/Hi8/
DVC
camcorder
E
B
A
F
To avoid
picture
DVD
G
distortion:
Do not
Hi-fi
connect
VCR
equipment
to E and F
connectors
at the same
time.
H
Acceptable input signal
Available output signal
A No inputs
Audio signal.
B Audio/video and RGB signal
C Audio/video and RGB signal
D Audio/video and S video signal
E S Video signal
Video/audio from TV tuner.
Video/audio displayed on TV screen (monitor out).
Video/audio from selected source.
No output.
F Video signal
No output.
G Audio signal
No output.
H No input
Audio signal to headphones.
continued...
Additional Information
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information when connecting equipment
Connecting a VCR
We recommend you connect your VCR to the D socket using a scart lead. If you do not have a scart lead, use the “Manual
Programme Preset” section on page 16 to tune in the channel of the VCR test signal to TV programme number “0”. Also refer to
your VCR instruction manual to get the VCR test signal.
If your video supports SmartLink please refer to the "SmartLink" section of this instruction manual on page 22.
Connecting to external Audio Equipment:
Plug in your Hi-Fi equipment to the audio output sockets A if you wish to amplify the audio output from projection TV. Next ,
using the menu system, select the “Sound Adjustment” menu and set the “TV Speakers” to “Off”.
Audio level of the external speakers can be modified by pressing the volume buttons on the remote control. Also treble and
bass settings can be modified through the “Sound Adjustment” menu.
Right
To enjoy “Dolby Virtual” sound effect through your Hi-Fi equipment:
Place the speakers of your equipment in front of your listening position and beside the
projection TV set but keeping a distance of 50 cm between each speaker and the
projection TV set.
Left
Hi-Fi
speaker
Hi-Fi
speaker
Then by using the menu system, select the menu “Sound Adjustment”. Next select
“Dolby V” on the “Effect” option.
~50°
Your sitting position
GB
Using Optional Equipment
In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the
connector to which you have connected the device.
e. g. : Your VCR is connected to the connector with the symbol Y1/
repeatedly until you see the symbol 1 on the screen.
1. Press the button
on the remote control
1 Connect your equipment to the designated projection TV socket, as it is indicated on the previous
page.
2 Switch on the connected equipment.
3 To watch the picture of the connected equipment, press the
button repeatedly until the
correct input symbol appears on the screen.
Symbol Input Signals
1
• Audio / video input signal through the Scart connector B
1
• RGB input signal through the Scart connector B. This symbol appears only if an RGB
source has been connected.
2
• Audio / video input signal through the Scart connector C.
2
• RGB input signal through the Scart connector C. This symbol appears only if an RGB
source has been connected.
3
• Audio/video input signal through the Scart connector D.
S
S
3
• S Video Input signal through the Scart connector D. This symbol appears only if an S
Video source has been connected.
4
• Video input signal through the phono socket F and Audio input signal through G.
4
• S Video Input signal through the front S Video input jack E and Audio signal through
G. This symbol appears only if an S Video source has been connected.
4 Press
button on the remote control to return to the normal TV picture.
For mono equipment
S
Connect the phono plug to the L/G/S/I socket on the side of the TV and select
4 or
4 input
signal using the instructions above. Finally, refer to the “Sound Adjustment” section of this manual
and select “Dual Sound” “A” on the sound menu screen.
Additional Information
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartLink
SmartLink is a direct link between your projection TV set and a VCR.
For SmartLink you need:
• A VCR which supports SmartLink, NextView Link, Easy Link or Megalogic.
Megalogic is a trademark of Grundig Corporation.
EasyLink is a trademark of Philips Corporation.
• A fully-wired 21 pin SCART cable to connect your VCR to the Scart connector :3/q3
(SMARTLINK) on the rear of the Projection TV.
The features of SmartLink are:
• Tuning information such as the channel overview are downloaded from the projection
TV set to the VCR.
• Direct projection TV recording: While watching TV you need to press just one button on
the VCR to record this programme.
VCR
• Automatically switching on: With the projection TV in standby mode, pressing the
“Play z” button on your VCR automatically switches the TV on.
For more information on SmartLink, please refer to the Instruction Manual of your
VCR.
Additional Information
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Configuration for VCR/DVD
In it’s default condition this remote control will operate the basic functions of this Sony TV, Sony DVDs and most Sony VCRs. To
control VCRs and DVDs of other manufacturers (and some Sony VCR models), please complete the following steps:
• Before you start, look up the 3 digit code for your brand of DVD or VCR from the list below. On those brands that have
more than one code, enter the first code number.
• Sony will endeavour to update the software according to market changes. Therefore, please refer to code table included
with the remote control for latest code set.
1 Press the Media Selector button on the remote control repeatedly until the required green light (VCR
or DVD) is lit.
1
If Media Selector is on TV position, code numbers will not be stored.
2 Before the green light goes out, press and hold the yellow button for approximately 6 seconds until the
3
2
green light starts flashing.
3 Whilst the green light is flashing, enter all three digits of the code for your brand of VCR or DVD using
the number buttons on the remote control.
If your selected code is entered correctly, all three green lights will be lit momentarily.
4 Turn on your VCR or DVD and check that the main functions work.
• If your device is not working or some of the functions do not work please check that you entered
the correct code set or try the next code listed against the brand.
• Your brand codes may be lost if weak batteries are not replaced within a few minutes. To reset
your brand of DVD or VCR please repeat the above steps. A small label is added inside the
battery door to allow you to record your brand codes.
GB
• Not all brands are covered and not all models of every brand may be covered.
VCR Brand List
DVD Brand List
Brand
Code
Brand
Code
SONY (VHS)
SONY (BETA)
SONY (DV)
AIWA
301, 302, 303, 308, 309
SONY
001
303, 307, 310
AIWA
021
304, 305, 306
DENON
GRUNDIG
HITACHI
JVC
018, 027, 020, 002
325, 331, 351
009, 028, 023, 024, 016, 003
AKAI
326, 329, 330
025, 026, 015, 004
DAEWOO
GRUNDIG
HITACHI
JVC
342, 343
006, 017
358, 355, 360, 361, 320, 351
KENWOOD
LG
008
327, 333, 334
015, 014
314, 315, 322, 344, 352, 353, 354, 348, 349
LOEWE
009, 028, 023, 024, 016, 003
LG
332, 338
MATSUI
ONKYO
PANASONIC
PHILIPS
PIONEER
SAMSUNG
SANYO
013, 016
LOEWE
358, 355, 360, 361, 320, 351
022
MATSUI
ORION
356, 357
018, 027, 020, 002
328
009, 028, 023, 024, 016, 003
PANASONIC
PHILIPS
SAMSUNG
SANYO
321, 323
004
311, 312, 313, 316, 317, 318, 358, 359
011, 014
339, 340, 341, 345
335, 336
324
007
SHARP
019, 027
SHARP
THOMSON
TOSHIBA
YAMAHA
012
THOMSON
TOSHIBA
319, 350
337
003
018, 027, 020, 002
Additional Information
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Optimum Viewing Area
For the best picture quality, try to position the projection TV so that you can view the screen from within the areas shown
below.
Horizontal viewing area
60
60
(Optimum viewing position)
Vertical viewing area
20
20
(Optimum viewing position)
Additional Information
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TV system:
Sound Output:
I
2 x 30 W (music power)
2 x 15 W (RMS)
Colour system:
PAL
Power Consumption:
SECAM, NTSC 3.58, 4.43 (only Video In)
225 W
Channel Coverage:
Standby Power Consumption:
I:
UHF B21-B69
< 0.7 W
Projected picture size:
Dimensions (w x h x d) :
44” (approx. 112 cm. measured diagonally)
approx. 1100 x 1160 x 536 mm.
Rear Terminals
Weight:
approx. 61 Kg.
1/
2/
3/
1
2
21-pin scart connector (CENELEC standard)
including audio/video input, RGB input, TV
audio/video output.
Accessories supplied:
1 Remote Control (RM-938)
2 Batteries (IEC designated, AA size)
21-pin Scart connector (CENELEC standard)
including audio / video input, RGB input,
monitor audio/video output.
Other features:
•Digital Comb Filter (High resolution).
•100 Hz picture, Digital Plus.
•Teletext, Fastext, TOPtext (250 page
TEXT memory).
•NICAM.
•Sleep Timer.
S
3
21-pin Scart connector (CENELEC standard)
including audio / video input, S video input,
selectable audio / video output and Smartlink
interface.
(SMARTLINK)
GB
•SmartLink (direct link between your
projection TV set and a compatible VCR.
For more information on SmartLink,
please refer to the Instruction Manual of
your VCR).
•Dolby Virtual.
•BBE.
•PIP.
audio outputs (Left/Right) - phono jacks
Side Terminals
S
4
4
4
S Video input – 4 pin DIN
video input – phono jack
audio input – phono jacks
headphones jack
•Auto Format.
•ACI (Auto Channel Installation).
Design and specifications are subject to change without notice.
Ecological Paper - Totally Chlorine Free
Additional Information
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Problem
Solution
No picture (screen is dark) and no sound.
• Check the aerial connection.
• Plug the TV in and press the
• If the standby indicator is on, press TV
button on the front of the projection TV.
button on the remote control.
Poor or no picture (screen is dark), but
good sound.
• Using the menu system, select the “Picture Adjustment” menu and select “Reset”
to return to the factory settings.
No picture or no menu information from
equipment connected to the Scart
connector.
• Check that the optional equipment is on and press the
the remote control until the correct input symbol is displayed on the screen.
button repeatedly on
Good picture, no sound.
• Press the
+ button on the remote control.
• Check that “TV Speakers” is “On” in the “Sound Adjustment” menu.
• Check that headphones are not connected.
No colour on colour programmes.
• Using the menu system, select the “Picture Adjustment” menu and select
“Reset” to return to factory settings.
When you switch on the TV the last
channel you were watching before
switching the TV off does not appear.
• This is not a malfunction. Press the number buttons on the remote control to
select the desired channel.
Undefined picture with different colour on
the outlines of the images.
• Adjust the colour registration. For more details, please refer to “Adjusting Colour
Registration (Convergence)” section on page 10.
Noisy picture when viewing a TV channel.
• Using the menu system, select the “Manual Programme Preset” menu and adjust
Fine Tuning (AFT) to obtain better picture reception.
• Using the menu system, select the “Noise Reduction” option in the “Picture
Adjustment” menu and select “Auto” to reduce the noise in the picture.
Distorted picture when changing
programmes or selecting teletext.
• Turn off any equipment connected to the Scart connector on the rear of the
projection TV.
Wrong characters appear when viewing
NexTView.
• Use the menu system to enter the “Language” menu (see page 14) and select the
same language that NexTView is broadcast in.
Brightness level of the picture is
notoriously decreased when viewing a
teletext page.
• This is not a malfunction. After 5 minutes viewing the same teletext page and
without any button being pressed, the projection TV automatically decreases the
brightness level to avoid any damage to the picture tube. To reset the brightness
level, press any button of the remote control.
Remote control does not function.
• Check that the Media Selector on the remote control is set to the device you are
using (VCR, TV or DVD).
• If the remote control does not operate the VCR or DVD even when the Media
Selector has been set correctly. Enter the necessary code set as explained in the
“Remote Control Configuration for VCR/DVD” chapter on page 23.
• Replace the batteries.
The standby indicator on the projection
TV flashes.
• Contact your nearest Sony service centre.
If you continue to experience problems, have your projection TV serviced by qualified personnel.
Never open the casing yourself.
Additional Information
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Television Channel Number Guide for analogue channels
Only the main transmitters are listed. Information regarding the regional sub-relay channel numbers can be obtained by
contacting The BBC Engineering Information Dept., Telephone Number 020 7852 5040.
MAIN TRANSMITTERS
London & South East
BBC1
BBC2
ITV
CH4
CH5
1
2
3
4
5
Bluebell Hill
Crystal Palace
Dover
Heathfield
Oxford
40
26
50
49
57
46
33
56
52
63
43
23
66
64
60
65
30
53
67
53
-
-
-
-
49
South-West
6
7
8
9
Beacon Hill
57
22
55
51
33
63
28
62
44
26
60
25
59
41
23
53
32
65
47
29
-
Caradon Hill
Huntshaw Cross
Redruth
-
67
37
-
10 Stockland Hill
Channel Islands
11 Fremont Point
51
44
41
47
-
South
12 Hannington
13 Midhurst
14 Rowridge
39
61
31
45
55
24
42
58
27
66
68
21
-
-
-
West
15 Mendip
58
64
61
54
37
GB
East
16 Sandy Heath
17 Sudbury
18 Tacolneston
31
51
62
27
44
55
24
41
59
21
47
65
39
-
52
Midlands (West)
19 Ridge Hill
20 Sutton Coldfield
21 The Wrekin
22
46
26
28
40
33
25
43
23
32
50
29
-
-
-
Midlands (East)
22 Waltham
58
64
61
54
-
Northern Ireland
23 Brougher Mountain 22
24 Divis
25 Limavady
28
27
62
25
24
59
32
21
65
-
-
-
31
55
North
26 Belmont
27 Emley Moor
22
44
28
51
25
47
32
41
56
37
North-West
28 Winter Hill
55
62
59
65
48
North-East
29 Bilsdale West Moor 33
30 Caldbeck
31 Chatton
32 Pontop Pike
26
34
45
64
29
28
49
61
23
32
42
54
-
30
39
58
56
-
-
Scotland
33 Angus
34 Black Hill
35 Sandale
57
40
22
-
31
33
22
33
40
33
39
31
55
63
46
67
-
27
26
28
26
46
26
45
27
62
60
43
-
53
50
-
-
37
-
56
48
-
36 Caldbeck
37 Craigkelly
38 Darvel
28
24
23
25
23
43
23
49
24
59
32
21
29
32
29
50
29
42
21
65
39 Durris
67
-
40 Eitshal (Lewis)
41 Keelylang Hill
42 Knock More
43 Rosemarkie
44 Rumster Forest
45 Selkirk
-
-
-
-
52
Wales
46 Blaenplwyf
47 Carmel
31
57
57
52
46
44
27
63
63
45
40
51
24
60
60
49
43
41
21
53
53
42
50
47
56
-
48 Llanddona
49 Moel-y-Parc
50 Presely
-
-
37
-
51 Wenvoe
Additional Information
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony España, S.A.
Printed in Spain
Download from Www.Somanuals.com. All Manuals Search And Download.
|