3-861-211-41 (1)
R
GB
GB
Getting Started
Operating Instructions
UvedenÌdoprovozu
Funkce
CZ
CZ
PrzedrozpoczÍciem
PL
PL
Instrukcjaobs≥ugi
KL-40WA1K
AkÈsz¸lÈk
H
H
¸zembehelyezÈse
Hasn·lati⁄tmutatÛ
燘‡ÎÓ
BG
BG
àÌÒÚ Û͈ËËÁ‡
ÂÍÒÔÎÓ‡Ú‡ˆËfl
èÓ‰„ÓÚӂ͇ Í
˝ÍÒÔÎÛ‡Ú‡ˆËË
RF
RF
àÌÒÚ Û͈Ëfl ÔÓ
˝ÍÒÔÎÛ‡Ú‡ˆËË
LCD Projection TV
© 1997 by Sony Corporation Printed in Spain
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
To prevent fire or shock hazard, do not expose the unit to
rain or moisture.
Important Information
Please read the following information on using and
maintaining the TV, for optimum viewing quality.
Dangerously high voltages are present inside the set. Do
not open the cabinet. Refer servicing to qualified
personnel only.
Picture Quality
Avoid touching the screen, and take care not to scratch
the surface with hard objects.
•
Illumination
Safety Information
All TVs operate on extremely high voltages. To prevent
fire or electric shock, please follow the safety procedures
below. For your protection, refer all servicing to qualified
personnel only.
To obtain a clear picture, do not expose the screen to
direct illumination or direct sunlight. If possible, use spot
lighting directed down from the ceiling.
Installation
To prevent over heating of the set, do not block the
ventilation openings.
•
•
For general safety:
Do not expose the TV to rain or moisture.
Do not open the rear cover.
Do not install the TV in a hot or humid place, or in a place
subject to direct sunlight, excessive dust or mechanical
vibration.
After transporting the TV directly from a cold to a warm
location, or if the room temperature has changed
suddenly, pictures may be blurred or show poor colour
over portions of the picture. This is because moisture has
condensed on the mirrors or lenses inside the TV. Let the
moisture evaporate before using the TV.
•
•
For safe operations:
Do not operate the TV on any other voltages, but 220–
240 V AC.
•
•
•
•
•
•
Do not operate the TV if any liquid or solid object falls in it
- have it checked immediately.
Do not keep the set plugged in if you are not going to use
it for several days.
Do not pull on the power cord to disconnect the TV. Pull it
out by the plug.
Do not place anything on the surface of the front panel
cover when you open it.
Maintenance
•
•
Save the original shipping carton and packing material to
use if you ever have to ship your TV. For maximum
protection, repack your TV as it was originally packed at
the factory.
To keep the cabinet looking brand-new, periodically clean
it with a soft cloth. Stubborn stains may be removed with a
cloth slightly dampened with a mild detergent solution.
Never use strong solvents such as thinner or benzene, or
abrasive cleaners since these will damage the cabinet. As
a safety precaution, unplug the TV before cleaning it.
To remove dust from the front of the screen, unplug the
TV and wipe gently with a soft cloth lightly dampened with
water or a mild detergent solution, using vertical strokes
only. Then wipe it with a dry, soft cloth. Never use
solvents or thinners for cleaning purposes.
•
•
If the picture turns dark after the TV has been in use for a
long period of time, it may be necessary to clean the
inside of the TV. Consult qualified service personnel for
this.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Overview ................................................................................... 4
GB
GB
Getting Started
Getting Started ............................................................... 6
Step 1 Preparation ..................................................................... 6
Check the supplied accessories ...................................... 6
Insert the batteries into the Remote Commander ............. 6
Connect the aerial ........................................................... 6
Operating Instructions
Step 2 Tuning in to TV Stations .................................................. 7
Choosing the Menu Language and the Country ............... 7
Presetting Channels Automatically .................................. 8
Additional Presetting Functions .................................................. 9
Presetting Channels Manually......................................... 9
Sorting Programme Positions........................................ 10
Using “Further Programme Preset” ............................... 11
Skipping Programme Positions ..................................... 12
Captioning a Station Name ........................................... 12
Using Parental Lock ...................................................... 13
Tuning in a Channel Temporarily ................................... 13
Operating Instructions ................................................. 14
Watching the TV....................................................................... 14
Switching the TV on and off ........................................... 14
Selecting TV Programmes ............................................ 14
Adjusting the Volume .................................................... 14
Operating the TV Using the Buttons on the TV ............... 14
Watching Teletext or Video Input ................................... 15
More Convenient Functions .......................................... 15
Adjusting and Setting the TV Using the Menu ........................... 16
Adjusting the Picture and Sound ................................... 16
Using the Sleep Timer................................................... 17
Operating Screen Mode ................................................ 18
Auto 16:9 ...................................................................... 18
Teletext .................................................................................... 19
Direct Access Functions................................................ 19
Using the Teletext Menu ............................................... 21
User Page Bank System ............................................... 22
Connecting and Operating Optional Equipment ........................ 23
Connecting Optional Equipment .................................... 23
Selecting lnput and Output ............................................ 24
Using AV Preset ........................................................... 25
Remote Control of Other Sony Equipment ..................... 26
For Your Information ................................................................ 27
Optimum Viewing Area ................................................. 27
Cleaning the Air Filter .................................................... 28
Replacing the Lamp ...................................................... 29
Troubleshooting ............................................................ 30
Specifications ............................................................... 30
Warning Indicators ........................................................ 31
Stabilizing the Projection TV.......................................... 31
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
This section briefly describes the buttons and controls on the TV
set and on the Remote Commander. For more information, refer to
the pages given next to each description.
TV set-front
Name
Refer to page
Symbol
u
Main power switch
Standby indicator
Stereo A/B indicators
Lamp indicator
14
14, 31
17
u
A-m-B
29, 31
14
Programme
PROGR+/–
.+/–
Volume buttons
14
Input select buttons
Headphones jack
Input jacks (S video/video/audio)
15
l
23
S
3,
3,
3
24
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote commander
Menu operation
GB
Symbol
Name
Refer to page
See below.
MENU
Menu on/off button
Joystick for Menu selection
TV
VTR 1 23 MDP
¤
See below.
TV/Teletext operation
Video operation
VIDEO
Press to confirm selection
(OK function)
0
(
P
)
r
u
p
+
_
REC
CH
+
˚
;
?
…/
Ú/;
Video operation
8
8
;
´
x
´/´
a/Å
A
Symbol
Name
Refer to page
TV/Teletext operation
VTR1/2/3,
MDP
Video equipment selector
26
c
≥
MENU
;; - :: L Video equipment operation
JaVIDEO f buttons
CH +/–
26
¸
PROGR
RM-862
No function on this set
Menu operation
Symbol :
,
,
,
,
TV/Teletext operation
Symbol
o
Name
Refer to page
For the Menu System
Use the MENU button and the joystick as follows.
Mute on/off button
TV Standby button
15
14
14
TV u
;
1 Press MENU button to switch menu on or off.
TV power on/TV mode selector
button
MENU
f
Teletext button
15
15
20
24
20
14
…/
Input mode selector/
2 Use the joystick as follows:
Teletext: Freezing the subpage
Output mode selector/
Teletext: Reveal button
Ú/
GREEN: scroll up
1,2,3,4,5,6, Number buttons
7,8,9 and 0
RED:
decrease/back to last item
or to last menu
When menu is not
displayed:
Push to red to display the
last menu screen
YELLOW:
increase/forward
to next item
÷
Double-digit entering button
14
9
C
Direct channel entering button
Volume control button
Á+/–
14
14
PROGR +/– Programme selectors
Joystick: Press at
its neutral position
to confirm selection
or store
Teletext: Page up/page down buttons 20
BLUE: scroll down
Í
Picture adjustment button
Sound adjustment button
On-screen display button
Time display button
16
16
15
15
15
15
22
≥
The operable functions of the joystick are displayed on the
screen.
“Freeze” button
Button to change Screen Format
Teletext: Favourite pages button
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
2
1
Step 1 Preparation
2
1
1Check the supplied accessories
When you’ve taken everything
out of the carton, check that you
have these items:
•
•
•
•
RM-862 Remote Commander
Two IEC designation R6 batteries
Wrench (1)
Bracket (2)
2Insert the batteries into the Remote Commander
Note: Always remember
to dispose of used
batteries in an
environmentally friendly
way.
Remove the cover.
Check the correct
polarities.
3Connect the aerial
C
Fit an IEC aerial connector attached to 75-ohm coaxial cable (not
supplied) to the ) socket at the rear of the TV.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Step 2 Tuning in toTV Stations
2
1
1Choosing the Menu Language
and the Country
TV
VTR 1 23 MDP
¤
Using this function, you can select the language of the menu
LANGUAGE
screens. Also, you can select the country in which you will use the
TV. In this way, the channels of the selected country will
automatically get the top positions during automatic presetting.
VIDEO
0
(
P
)
r
u
OK
p
+
_
REC
CH
+
˚
;
Select
1
Press the power switch uon the TV.
If the standby indicator uon the TV is lit, press ;or a number
button on the Remote Commander.
?
…/
Ú/;
8
8
;
´ x
´/´
a/Å
A
2
3
Press MENU on the Remote Commander.
The LANGUAGE menu appears.
Push the joystick to blue or green to select the language. Press
the joystick to confirm your selection.
c
The COUNTRY menu appears.
COUNTRY
≥
MENU
4
5
Push the joystick to blue or green to select the country in which you
wish to operate the TV. Press the joystick to confirm the selection.
¸
PROGR
A
B
CH
CZ
D
DK
E
Press MENU to restore the normal TV picture.
F
RM-862
f
To go back to the
normal TV picture
Press MENU. Normal
TV picture will be
restored after one
minute if menu functions
are not selected.
Note on the Demo
function
If you choose Demo in
the INSTALLATION
menu, you can see a
sequential
demonstration of the
menu functions.
Press MENU to stop the
function.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2Presetting Channels
Automatically
With this function, the TV automatically searches and stores up to
100 channels onto programme positions. If you prefer “Presetting
Channels Manually”, please refer to page 9 in Additional Presetting
Functions.
PRESET
Auto Programme
Manual Programme Preset
Programme Sorting
Parental Lock
Installation
1
2
Press MENU.
Push the joystick to blue or green to select the symbol
menu screen, then push to yellow.
on the
3
Push the joystick to blue or green to select “Auto Programme”,
then push to yellow.
The AUTO PROGRAMME menu appears.
AUTO PROGRAMME
4a) All items shown on the menu screen are as wanted: Press the
joystick to select START.
START
ACI SYS PROG CH LABEL
Now the automatic channel presetting starts from programme
position 1.
on B/G
01
C07 SW3
or
4b) You wish to change items as shown on the menu screen: Push
the joystick to blue or green. Push to yellow repeatedly until the
desired item is highlighted.
Push the joystick to blue or green to select the following options:
ACI(AutomaticChannelInstallation,dependingon
availabilityofserviceinyourcountry)
on: fast channel presetting by special networks using the channel
frequency (e.g. F055)
TV-system and station label
off: ACI is not active, only ITP (Intelligent Tuner Preset)
Notes
• After presetting the
channels automatically,
you can check which
channels are stored on
which programme
positions.
SYS(TVBroadcastSystem)
I for U.K.
B/G for Western European Countries
D/K for Eastern European Countries
L for France
For details, see
“Displaying the
Programme Table” on
page 15.
PROG(ProgrammePosition)
Presetting automatically starts from position 1.
CH(channel)
C to start presetting with terrestrial channels
S to start presetting with cable channels
Press the joystick as soon as the automatic presetting starts.
• You can sort the
programme positions to
have them appear on
screen in the order you
like. For details, see
“Sorting Programme
Positions” on page 10.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Presetting Functions
2
1
Presetting Channels Manually
GB
Using this function, you can preset channels one by one to
different programme positions. This is also convenient to allocate
programme numbers to video input sources.
PRESET
MANUAL
PROGRAMME
PRESET
Auto Programme
Manual Programme Preset
Programme Sorting
Parental Lock
Installation
1
2
Press MENU.
Push the joystick to blue or green to select the symbol
menu screen. Push to yellow to confirm the selection.
on the
TV
VTR 1 23 MDP
3
4
5
Push to blue or green to select “Manual Programme Preset”. Push
to yellow to confirm the selection.
¤
MANUAL PROGRAMME PRESET
VIDEO
Push to blue or green to select the programme position (PROG) to
which you want to preset a channel. Push to yellow to confirm.
PROG SYS
CH SEARCH LABEL
0
(
P
)
r
u
1
2
3
4
5
6
7
8
B/G C21 off
B/G C34 off
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
p
+
B/G C33 off
B/G C45 off
B/G C02 off
B/G C08 off
B/G C10 off
B/G C12 off
REC
CH
+
Push to blue or green to select the TV broadcast system (SYS)
(I for U.K., B/G for western European countries, D/K for eastern
European countries, L for France) or a video input source (EXT).
Push to yellow to confirm.
˚
;
_
?
…/
Ú/;
8
8
;
´ x
´/´
a/Å
A
6
Push to blue or green to select “C” (for terrestrial channels), “S” (for
cable channels) or “F” ( for channel frequency). Push to yellow to
confirm.
Therearetwooptionstopresetchannelsmanually:
c
≥
MENU
a) You know the channel number or channel frequency.
¸
PROGR
Please use method “Direct Input”.
or
b) You don’t know the channel number or frequency.
Please use method “Search”.
RM-862
7a) DirectInput
For channel numbers, you need to input a two digit number, for the
frequency, a three digit number.
•
•
Push to blue or green to select the first digit of the channel number
or frequency. Push to yellow to confirm.
Push to blue or green to select the second digit of the number or
frequency. Push to yellow to confirm. In case of the channel
number, the search starts.
•
Push to blue or green to select the third digit of the frequency
number. Push to yellow to start the search of the frequency.
To continue search for another channel: Push to blue or green.
To store the selected channel: Press the joystick.
Repeat steps 4 to 7 a) to preset other channels.
•
•
•
7b) Search
•
Push repeatedly to yellow until a blue and a green arrow appear in
the section SEARCH.
•
•
•
•
Push to blue or green to search for the next available channel.
To continue search for another channel: Push to blue or green.
To store the selected channel: Press the joystick.
Repeat steps 4 to 7 b) to preset other channels.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAMME
SORTING
Sorting Programme Positions
This function enables you to sort the programme positions to a
PROGRAMME SORTING
preferable order.
PROG
CH
LABEL
1
2
3
4
5
6
7
8
C03
C04
C07
C09
C12
C13
C14
C15
BBC 2
ITV
MBC
- - - - -
- - - - -
- - - - -
- - - - -
BBC 1
1
2
Press MENU.
Push the joystick to blue or green to select the symbol
menu screen. Push to yellow to confirm.
on the
3
4
5
Push to blue or green to select “Programme Sorting”. Push to
yellow to confirm.
Move PR 8 to PR - -
Push to blue or green to select the programme position of the
channel you want to change. Press joystick to confirm.
Push to blue or green to select the new programme position.
Press joystick to confirm.
8
C15
BBC1
To go back to the
normal TV picture
Press MENU.
Now the selected channel is changed to the new programme
position.
6
Repeat steps 4 and 5 to sort other programme positions.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Using“Further Programme
Preset”
GB
INSTALLATION
Further Prog. Preset
Using the FURHTER PROGRAMME PRESET menu you can:
AV Preset
a) individually adjust and store the volume level of each channel
Language/Country
Demo
(Volume offset).
b) in case of picture distortions, use manual fine tuning to obtain a
better picture quality. The factory setting is “on” for AFT
(Automatic Fine Tuning).
1
2
Press MENU.
Push the joystick to blue or green to select the symbol
menu screen. Push to yellow to confirm.
on the
FURTHER PROGRAMME PRESET
PROG
VOL
AFT
1
2
3
4
5
6
7
8
0
0
0
0
0
0
0
0
on
3
4
5
Push to blue or green to select “Installation”. Push to yellow to
confirm.
on
on
on
on
on
on
on
Push to blue or green to select “Further Prog. Preset”. Push to
yellow to confirm.
Push to blue or green to select the programme position you want.
Push to yellow repeatedly to select:
a) VOL (Volume Offset) or b) AFT (Automatic Fine Tuning).
The selected item changes its colour.
6a) VOL
Push to blue or green to adjust the volume for the selected
programme position within a range of –7 to +7. Press the joystick
to confirm. Repeat step 6 to set the volume level for other
programme positions.
6b) AFT
Push to blue or green to fine-tune the channel within a range of
–15 to +15. Press the joystick to confirm. Repeat step 6 to fine-
tune other channels.
7
Press MENU to restore the normal TV picture.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL
PROGRAMME
PRESET
Skipping Programme Positions
This function enables you to skip unused programme positions
when selecting them with the PROGR +/– buttons. However, by
using the number buttons you can still select the skipped
programme position.
MANUAL PROGRAMME PRESET
PROG SYS
CH SEARCH LABEL
1
2
3
4
5
6
7
8
B/G C21 off
B/G C24 off
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
B/G C25 off
B/G C27 off
B/G C28 off
B/G C22 off
B/G C26 off
B/G C25 off
1
2
Press MENU.
Push the joystick to blue or green to select the symbol
menu screen. Push to yellow to confirm.
on the
3
4
5
Push to blue or green to select “Manual Programme Preset”. Push
to yellow to confirm.
3
–––
Push to blue or green to select the programme position you want to
skip. Push to yellow to confirm.
3
4
–––
B/G
Push to blue or green to select “- - -” in the position SYS (system).
Press the joystick to confirm.
To go back to the
normal TV picture
Press MENU.
6
7
Repeat steps 4 and 5 to skip other programme positions.
Press MENU to restore the normal TV picture.
Captioning a Station Name
Channels are automatically labelled during presetting. You can,
however, individually name a channel or a video source using up
to five characters.
MANUAL
PROGRAMME
PRESET
MANUAL PROGRAMME PRESET
PROG SYS
CH SEARCH LABEL
1
2
3
4
5
6
7
8
B/G C21 off
B/G C24 off
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
B/G C25 off
B/G C27 off
B/G C28 off
B/G C22 off
B/G C26 off
B/G C25 off
1
2
Press MENU.
Push the joystick to blue or green to select the symbol
menu screen. Push to yellow to confirm.
on the
3
4
Push to blue or green to select “Manual Programme Preset”. Push
to yellow to confirm.
Push to blue or green to select the programme position with the
channel you want to label. Push to yellow repeatedly until the first
element of the position LABEL is highlighted.
2
B/G
B/G
C 25
off S– – – –
5
Push to blue or green to select a letter or a number (select “-” for a
blank). Push to yellow to confirm. Select the other four characters
in the same way.
2
C 25
off SONY
6
7
8
After selecting all characters, press the joystick to confirm.
Repeat steps 4 to 6 to label other channels or video sources.
Press MENU to restore the normal TV picture.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL LOCK
Using Parental Lock
GB
This function enables you to prevent children from watching
undesirable broadcasts.
PARENTAL LOCK
PROG
CH
LABEL
VHS
1
2
3
4
5
6
7
8
AV1
C25
C42
C26
C34
C35
C36
C37
If you try to select a
programme that has
been blocked
BBC 2
BBC 1
C 4
1
2
Press MENU.
ITV
Push the joystick to blue or green to select the symbol
menu screen. Push to yellow to confirm.
on the
- - - - -
- - - - -
- - - - -
The message
“LOCKED” appears on
the blank TV screen.
3
4
Push to green or blue to select “Parental Lock”. Push to yellow to
confirm.
Push to green or blue to select the channel you want to block.
Press the joystick to confirm.
PROG
CH
LABEL
To unblock
1
2
3
4
AV1
C25
C42
C26
VHS
BBC 2
BBC 1
C 4
Select the channel to
unblock in the
The symbol
that this channel is now blocked.
appears before the programme position to indicate
“PARENTAL LOCK”
menu. Press the
joystick. The symbol
disappears.
5
6
Repeat step 4 to block other channels.
Press MENU to restore the normal TV picture.
Tuning in a ChannelTemporarily
TV
VTR 1 23 MDP
You can tune in to a channel temporarily, even though it has not
¤
been preset.
VIDEO
0
(
P
)
r
u
C - -
1
2
Press C on the Remote Commander. For cable channels, press C
twice.
The indication “C” ( “S” for cable channels) appears on the screen.
p
+
_
REC
CH
+
˚
;
?
…/
Ú/;
Enter the double-digit channel number using the number buttons
(e.g. for channel 4, first press 0, then 4).
8
8
;
´ x
´/´
a/Å
A
The channel appears. Note that the channel will not be stored.
c
≥
MENU
¸
PROGR
RM-862
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Watching theTV
This section explains the basic functions you use while watching
the TV. Most operations are done using the Remote Commander.
TV
VTR 1 23 MDP
¤
VIDEO
Switching theTV on and off
0
(
)
r
u
p
P
+
_
REC
CH
+
˚ ;
Switching on
?
…/
Ú/;
Depress uon the TV.
8
8
; ´ x
Switching off temporarily
´/´
Press uon the Remote Commander.
The TV enters standby mode and the standby indicator on the front
of the TV lights up in red.
a/Å
A
To switch on again
c
≥
MENU
Press O, PROGR +/–, or one of the number buttons on the
¸
PROGR
Remote Commander.
Switching off completely
Depress uon the TV and the indicator on the front of the TV lights
up in amber.
RM-862
To save energy, we recommend you switch off your TV completely
when the TV is not in use.
SelectingTV Programmes
Press PROGR +/– or press the number buttons.
To select a double-digit number
If no picture appears
when you depress u
on the TV and if the
standby indicator on
the TV is lit, the TV is in
standby mode.
Press Oor one of the
number buttons to
switch it on.
Press ÷, then the numbers.
For example, if you want to choose 23, press ÷, 2 and 3.
Adjusting theVolume
Press ¸+/–.
Operating theTV Using the
Buttons on theTV
To select the programme number, press the PROGR +/– buttons.
To adjust the volume, press the ¸+/– buttons.
To select the video input picture, press the
button.
To reset picture and sound controls to the factory preset level
(Reset function), press PROGR +/– buttons simultaneously.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
WatchingTeletext orVideo Input
Watching teletext
GB
1
2
Press_
toviewtheteletext.
For teletext operation, enter a 3-digit page number with the number
buttons to select a page.
For details of the teletext
operation, refer to
page 19.
For fastext operation, push the joystick to the colour mark which
corresponds to the colour-coded menu.
For both operations, press √ (PAGE + ) for the next page or
◊ (PAGE – ) for the preceding page.
For details of the video
input picture, refer to
page 24.
3
To go back to the normal TV picture, press O .
Watching a video input picture
1
2
Press
repeatedly until the desired video input appears.
To go back to the normal TV picture, press O.
More Convenient Functions
TV
VTR 1 23 MDP
Displaying the on screen indications
¤
Press
to display the indications.
VIDEO
Press again to make the indications disappear.
0
(
P
)
r
u
p
+
_
Muting the sound
Press o.
To resume normal sound, press oagain.
REC
CH
+
˚
;
?
…/
Ú/;
8
8
;
´ x
Displaying the time
Press #. This function is available only when teletext is broadcast.
To make the time display disappear, press #again.
´/´
a/Å
A
Displaying the Programme Table
1
2
BBC
SAT
TV5
C02
C15
RTL
SKY
S34
AV1
MTV
c
≥
MENU
Push the joystick to blue or green to select a programme, then
press the joystick to confirm. A Programme Table will be displayed
on the left side of the TV screen.
3
¸
PROGR
4
5
6
7
8
To make the Programme Table disappear, press MENU.
9
10
Freezing the picture
RM-862
When watching the TV you can “freeze” the picture. Press
Press the button again to return to the normal TV picture.
.
Changing the screen format
Press
repeatedly to change the Screen mode as follows:
4:3 (4:3 picture)
A
A
14 : 9 (for 14 : 9 laser discs)
Zoom (16:9 for movies broadcast in the cinemascopic
format)
A
A
A
Wide (for 16:9 broadcasts)
Auto Wide (automatic selection of the optimum screen ratio)
Smart (imitation of 16:9 for 4:3 broadcasts)
See also page 18 for more information.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting and Setting theTV Using
the Menu
PICTURE
CONTROL
Adjusting the Picture and Sound
Although the picture and sound are adjusted at the factory, you can
adjust them to suit your own taste. You can also select dual sound
(bilingual) programmes when available or adjust the sound for
listening with the headphones.
PICTURE CONTROL
SOUND
CONTROL
Picture Mode
Contrast
Brightness
Colour
[Personal]
Sharpness
Reset
1
Press Í(for picture) or ≥ (for sound) on the Remote Commander.
AI
[off]
or
TV
VTR 1 23 MDP
¤
Press MENU and select the symbol
Sound Control. Push to yellow to confirm.
The PICTURE CONTROL or SOUND CONTROL menu appears.
for Picture Control or ≥ for
VIDEO
0
(
P
)
r
u
SOUND CONTROL
[User]
Sound Mode
Treble
p
+
2
3
Push the joystick to blue or green to select the desired item. Push
to yellow to confirm.
The selected item changes its colour.
Bass
REC
CH
+
˚
;
Balance
_
Loudness
Space
Dual Sound
2Volume
2Dual Sound
Speaker
[
[
off
off
]
]
?
…/
Ú/;
[mono]
8
8
;
´ x
[mono]
[ Main ]
Push to red or yellow to adjust the selected item. Press the joystick
to confirm.
For the effect of each control, see the table below.
´/´
a/Å
A
Brightness
4
5
Repeat steps 2 and 3 to adjust other items.
Press MENU to restore the normal TV picture.
c
≥
MENU
¸
PROGR
Effect of each control
PICTURE CONTROL
Picture Mode
Contrast
Effect
RM-862
Personal ˜Game ˜Movie ˜Sports ˜Live
Less
More
Brighter
More
Reddish
Sharper
Brightness
Colour
Darker
Less
Hue
Greenish
Softer
Notes
Sharpness
Reset
• HUE is available for
NTSC colour systems
only.
• Brightness, Colour and
Sharpness are
Resets picture to the factory preset levels.
AI
Off: normal
On: automatic optimization of contrast level according to TV signal
available, only if
“Personal” is selected in
“Picture Mode”.
• Treble, Bass and
Loudness are available,
only if “User” is selected
in “Sound Mode”.
Note on LINE OUT
The dual sound mode
output from the >jack
on the rear correspond to
the Headphones Dual
Sound settings.
When watching a video
input source with
stereo sound
You can select Dual
Sound to change the
sound.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND CONTROL
Effect
Sound Mode
Choice between different sound effects
GB
User ˜Pop ˜Jazz ˜Rock
↑
↑
Treble
Less
More
More
Bass
Less
Balance
Loudness
More left
More right
Off: normal
On: for music broadcasts
Space
Off: normal
On: special acoustic effect
Dual Sound
A: left channel B: right channel Stereo nMono
The selected mode of the A-m -B indicator on the TV lights up.
Headphones:
2 Volume
Less
More
A: channel 1 nB: channel 2
2 Dual Sound
Stereo n Mono
Speaker
Main: sound from TV set
Centre in: sound from external amplifier
TIMER
Using the SleepTimer
You can select a time period after which the TV automatically
To switch off the timer
Select “off” in step 3.
switches into standby mode.
To check the
remaining time
TIMER
1
2
Press MENU.
Sleep Timer
[10 Min ]
Push the joystick to blue or green to select the symbol ton the
menu screen. Push to yellow to confirm.
Press
.
To go back to the
normal TV picture
Press MENU.
3
Push to yellow. Push to blue or green to select the time.
The time period (in minutes) changes as follows:
off ˜10 ˜20 ˜30 ˜40 ˜50 ˜60 ˜70 ˜80 ˜90
↑
↑
4
After selecting the time period, press the joystick to confirm.
One minute before the TV switches into standby mode, a message
is displayed on the screen.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Screen Mode
Using the Screen Mode menu, you can change the aspect ratio for
the TV display for wide screen effects.
SCREEN MODE
Screen Mode
Screen Position
TV
VTR 1 23 MDP
[zoom]
[
0
]
¤
1
2
Press MENU to display the main menu.
Auto 16:9
[off]
VIDEO
Push the joystick to blue or green to select the symbol
menu screen. Push to yellow to confirm.
The SCREEN MODE menu appears.
on the
0
(
P
)
r
u
p
+
REC
CH
+
˚
;
_
3
Push to blue or green to select “Screen Mode”. Push to yellow to
confirm.
?
…/
Ú/;
8
8
;
´ x
The Screen Mode menu appears.
´/´
a/Å
A
You have the following options:
4:3
for normal ratio 4:3 a
Smart: imitation of wide screen effect (16:9) for 4:3 broadcasts b
Zoom imitation of wide screen effect (16:9) for movies broadcast
in cinemascopic format c
c
≥
MENU
Wide: for 16:9 broadcasts d
¸
PROGR
a
14:9
for 14:9 laser discs e
Auto Wide: automatic selection of the optimum screen ratio (e. g.
4:3 picture automatically changes to Smart mode, 16:9
picture changes to Zoom mode).
RM-862
Press the joystick to confirm the selection.
Changing the screen position (for Zoom/Auto
Wide modes)
When using the Zoom mode and 14:9 mode, part of the picture at
the top and bottom will be cut off. With the help of the function
“Screen position”, you can move the screen up or down in order to
see the cut-off part of the screen (e.g., to read the subtitles).
Push the joystick to blue or green to select “Screen Position”.
Push to yellow to confirm.
Push to blue or green to adjust the screen Position (Zoom: –7 to
+7, 14:9: –4 to +4, Auto Wide: –5 to +5). Press the joystick to
confirm.
b
c
d
When you want to
select the screen
mode
You can also select the
screen mode by
pressing the
on the Remote
Commander.
button
Auto 16:9
Set Auto 16:9 to “on” for automatic selection of format or PAL plus
for PAL plus broadcasts, or “off” for normal mode.
To restore the normal
TV picture
Press MENU.
1
2
Press MENU.
Push the joystick to blue or green to select the symbol
menu screen.
on the
Push to yellow to confirm.
The SCREEN MODE menu appears.
3
4
5
Push joystick to blue or green to select “Screen Mode”.
Push to yellow to confirm.
Push joystick to blue or green to select “Auto 16:9”.
Push to yellow to confirm.
Push joystick to blue or green to select “on” or “off”.
Press the joystick to confirm.
e
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
TV stations broadcast an information service called Teletext via
the TV channels.Teletext service allows you to receive various
information pages such as weather reports or news at any time
you want.
TV
VTR 1 23 MDP
¤
GB
VIDEO
0
(
P
)
r
u
p
+
_
REC
CH
+
˚
;
Direct Access Functions
?
…/
Ú/;
8
Switching Teletext on and off
8
;
´ x
1
2
Select the TV channel which carries the teletext broadcast you
want to watch.
´/´
a/Å
A
Press_
toswitchonteletext.
A teletext page will be displayed (usually the index page).
If there is no teletext broadcast, “No text available” is displayed on
the information line at the top of the screen.
c
≥
MENU
¸
PROGR
To switch teletext off
Press O.
Selecting a teletext page
RM-862
With direct page selection
Use the number buttons to input the three digits of the chosen
page number.
If you have made a mistake, type in any three digits. Then re-enter
the correct page number.
With page-catching
1
2
Select a teletext page with a page overview (e.g. index page).
Press the joystick.
“Page Catching” is displayed at the top of the page.
Note
Teletext errors may
occur if the broadcasting
signals are weak.
3
Push joystick to blue or green to select the page you want. Press
the joystick to confirm.
The requested page will appear in a few seconds.
Press_
toresumenormalteletextreception.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing next or preceding page
Press √ (PAGE+) or ◊ (PAGE–).
The next or preceding page appears.
Superimposing the teletext display on the TV programme
•
•
Press fonce to get Teletext only.
Press ftwice for Mix mode.
The normal TV screen and the Teletext screen are overlapped.
Preventing a teletext page from being updated
•
•
Press
.
The symbol “ ” is displayed on the information line.
Press fto resume normal teletext reception.
Revealing hidden information (e.g. for a quiz)
Sometimes pages contain concealed information, such as
answers to a quiz. The reveal option lets you disclose the
information.
Press
. Press again to cancel.
Press fto resume normal teletext reception.
Using Fastext
With Fastext you can access pages with one key stroke.
When a Fastext page is broadcast, a colour-coded menu will
appear at the bottom of the screen. The colours of this menu
correspond to the red, green, yellow and blue positions on the
Remote Commander.
Push the joystick to the colour mark which corresponds to the
colour-coded menu. The page will be displayed after a few
seconds.
Note
Fastext operation is
possible, only when the
TV station broadcasts
Fastext signals.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using theTeletext Menu
This TV is provided with a menu-guided teletext system. When
teletext is switched on, you can use the menu buttons to operate
the teletext menu. Select the teletext menu functions in the
following way:
TV
VTR 1 23 MDP
¤
TELETEXT MENU
User Pages
Index
GB
VIDEO
0
(
P
)
r
u
Top/Bottom/Full
Text Clear
Subtitles
p
+
Time Page
Subpage
REC
CH
+
˚
;
_
1
2
Press MENU.
The menu will be superimposed on the teletext display.
Preset User Pages
?
…/
Ú/;
8
8
;
´ x
Push the joystick to blue or green to select the teletext function you
want. Push to yellow to confirm the selection.
´/´
a/Å
A
TELETEXT MENU
User Pages
Index
Top/Bottom/Full
Text Clear
Subtitles
Time Page
Subpage
USER PAGES/PRESET USER PAGES
See page 22 for information about presetting and operating the
user pages.
c
≥
MENU
Preset User Pages
INDEX
¸
PROGR
The index will give you an overview of the contents of the teletext
and the page numbers.
TOP/BOTTOM/FULL
RM-862
For convenient reading of a teletext page, you can enlarge the
teletext display with the ability to scroll up and down. After having
selected the function, an information line Top/Bottom/Full will be
displayed.
Push the joystick to green to enlarge the upper half, push to blue to
enlarge the lower half. Press the joystick to resume the normal
display.
Top
Bottom OK Full
Press fto resume normal teletext reception.
TEXT CLEAR
After selecting the function, you can watch a TV programme while
waiting for a teletext page to be captured. (The symbol changes its
colour.)
Note
Some of the features
may not be available
depending on the
teletext service.
Press fto resume normal teletext reception.
SUBTITLES
Your teletext service will inform you if a TV programme is subtitled.
After having selected the function, the subtitles will be displayed.
TIME PAGE
Your teletext service will inform you, if a time coded page is
available. You can have a page (e.g., an alarm page) displayed at
a certain time.
1
Select the Time Page in the teletext menu.
Push the joystick to yellow.
An information window is displayed. Push to blue or green to
select “on”. Push to yellow.
2
3
Use the number buttons to enter the three digits of the page you
want (e.g. 301). Push to yellow after each digit.
Use the number buttons to enter the four digits of the desired time
(e.g. 18-54). Push to yellow after each digit. Press joystick to
confirm.
4
Press MENU.
The time is displayed in the top left-hand corner of the screen.
At the requested time the page is displayed.
Press fto resume normal teletext mode.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the request
Push the joystick to red
and then to yellow.
SUBPAGE
You may want to select a particular teletext page from several
subpages which are rotated automatically. After having selected
the function, an information line will be displayed.
If two broadcasting
stations use the same
Teletext
You can preset one
bank to 2 different
programme positions.
To select the desired subpage, enter four digits using PROGR +/–
or the number buttons (e.g., enter 0002 for the second page of a
sequence).
User Page Bank System
You can store up to 30 pages in the “Teletext page bank system”.
In this way you have quick access to the pages you watch
frequently.
PRESET USER PAGES
BANK P1 P2 P3 P4 P5 P6
A
B
C
D
E
300 255 456 234 200 179
200 120 301 303 550 345
100 220 300 444
128 321 255
400 238 240 118 127
Storing pages
Allocate Bank
PROG LABEL BANK PROG LABEL BANK
There are 5 “banks” (A to E) for 5 teletext stations. In each bank
you can store 6 preferred pages (P1 to P6).
00
01
02
VHS
BBC1
BBC2
–
A
C
04
05
06
MTV
SKY
ITV
D
B
C
1
2
3
Press f(if Teletext is not on already) and MENU so that the
TELETEXT MENU display appears.
Push the joystick to blue or green to select “Preset User Pages”.
Push to yellow to confirm.
Push to blue or green to select the bank (from A to E) you want.
Push to yellow to confirm.
The cursor will go to the first position (P1) of the preferred pages.
4
5
Push to blue or green to select the three digits of your first favourite
page. Push to yellow after each digit. Push to yellow to confirm.
The cursor will go to the second position.
Repeat step 4 for the other 5 favourite pages. If you do not want to
preset all 6 page numbers, push to yellow without inserting any
number. After finishing the presetting, press the joystick.
6
7
Push to blue or green to select “Allocate Bank”. Push to yellow to
confirm.
Push to blue or green to select the programme position of the
channel which carries the teletext service for which you have
selected your favourite pages. Push to yellow to confirm.
8
9
Push to blue or green to select the bank from step 3. Press the
joystick to confirm.
Repeat steps 3 to 8 for other 4 banks available.
Displaying User Pages
USER PAGES - BANK B
1
2
Press MENU.
PAGE 300
PAGE 200
PAGE 203
PAGE 500
PAGE 234
PAGE 159
Push the joystick to blue or green to select “Preset User Pages”.
Push to yellow to confirm.
A table of the stored preferred pages will be displayed.
3
Push to blue or green to select the page you want. Press the
joystick.
The page is displayed after some seconds.
or
1
2
Press
.
Push joystick to blue or green to select the page you want. Press
the joystick.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting and Operating Optional
Equipment
Connecting Optional Equipment
You can connect optional audio-video equipment to this TV such as a
VCR, video disc player, and stereo system.
GB
To connect a VCR
using the ) terminal
Connect the aerial output
of the VCR to the aerial
terminal )of the TV.
We recommend that you
tune in the video signal to
programme number “0”.
For details, see
“Presetting Channels
4
1
Manually” on page 9.
C
If the picture or the
sound is distorted
Move the VCR away from
the TV.
6
S/video Input
(Y/C input)
Video signals can be
3
separated into Y
2
5
(luminance or brightness)
and C (chrominance)
signals.
Separating the Y and C
signals prevents them
from interfering with one
another, therefore it
improves picture quality
(especially luminance).
This TV is equipped with
3 S Video input jacks,
through which these
separated signals can be
input directly.
Acceptable input signal
Available output signal
1
2
3
4
5
6
Normal audio/video and RGB signal
Video/audio from TV tuner
Video/audio from selected source
No outputs
Normal audio/video and S video signal
Normal audio/video and S video signal
Normal audio/video and S video signal
No inputs
When connecting a
monaural VCR
Connect only the white
≤ jack to both the TV
and VCR.
Video/audio displayed on TV screen (monitor out)
Audio signal
Centre speaker input
No outputs
Set “Speaker” on the SOUND
CONTROL menu to “Main” or “Centre in”.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Input and Output
This section explains how to view the video input picture (of the
video source connected to your TV), and how to select the output
signal using direct access buttons or the menu system.
Selecting input with
PROGR +/– or number
buttons
1
You can preset video
input sources to the
programme positions so
that you can select them
with PROGR +/– or
number buttons. For
details, see “Presetting
Channels Manually” on
page 9.
Selecting input
Press
repeatedly to select the input source.
The symbol of the selected input source will appear.
To go back to the normal TV picture
Press O.
Input modes
Symbol
Input signal
1
Audio/video input through the
Audio/RGB input through the
Audio/video input through the
Audio/S video input through the
1 connector
TV
VTR 1 23 MDP
¤
1 connector
S
VIDEO
2
2/
2 connector
0
(
P
)
r
u
S
S
2
2/
2
p
+
_
REC
CH
+
˚
;
3
Audio/video input through
S video input through the
3 and
3 connector on the front
?
…/
Ú/;
S
S
3
3 connector (4-pin connector) on the front
8
8
;
´ x
S
4
Audio/video input through the
S video input through the
4/
4 connector
´/´
a/Å
A
S
S
4
4 /
4
You can also select the input mode using the
button on the TV.
c
≥
MENU
Selecting the output
¸
PROGR
S
The
2 /
2 connector outputs the source input from the
1
other connectors.
Press repeatedly to select the output.
The symbol of the selected output source appears.
RM-862
Output modes
S
Symbol
2/
2 connector outputs
1
Audio/video signal from the
Audio/video signal from the
Audio/video signal from the
Audio/video signal from the
1 connector
S
2
2/
2 connector
3
3,
4/
3 connectors
4 connector
S
4
TV
Audio/video signal from the )aerial terminal
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using AV Preset
Using this function you can preset the desired input source (e.g.
GB
1, RGB signal) to the respective AV input (AV 1
). In this
AV PRESET
way, a connected VCR will automatically switch to the RGB signal.
AV-INPUT
SOURCE
LABEL
AV1
AV2
AV3
AV4
AV
YC
AV
AV
AV1
YC2
AV3
AV4
1
2
Press MENU.
Push the joystick to blue or green to select the symbol
menu screen. Push to yellow to confirm.
on the
3
Push to blue or green to select “Installation”. Push to yellow. Push
to blue or green to select “AV Preset”. Push to yellow to confirm.
The AV PRESET menu appears.
4
5
Push to blue or green to select the desired AV input. Push to
yellow to confirm.
Push to blue or green to select the desired source. Push to yellow
to confirm. For the respective AV inputs you have the following
choice:
AV1: RGB or AV
AV2: YC2 or AV
AV3: YC3 or AV
AV4: YC4 or AV
6
7
To label a source: Push to blue or green to select the first
character (letter or number, “-” for a blank). Push to yellow to
confirm. Select the other four characters in the same way.
For automatic format and PAL plus selection (Auto 16:9):
Push to blue or green to select “on” for the AV input.
8
9
Press the joystick to store.
Repeat steps 4 to 8 for other AV inputs.
Checking and selecting the input and output sources
using the menu
You can display the menu to see which input sources are selected
for the TV screen, as well as which output source is selected. You
can also select them on the menu display.
VIDEO CONNECTION
TV screen
Output
[ TV
[ TV
- - - - - ]
- - - - - ]
1
2
Press MENU.
TV
TV
Push the joystick to blue or green to select the symbol
menu screen. Push to yellow to confirm.
on the
The VIDEO CONNECTION menu appears.
You can see which source is selected for the TV and for the output.
If you want to select the input and output on this menu, go on to the
next step.
3
4
Push to blue or green to select “TV screen” (input source for TV-
screen), or “Output” (output source for :2/q2).
Push to yellow to confirm.
Push to blue or green to select the desired source. Press joystick
to store.
For details about each source, see the table on page 24.
5
6
Repeat steps 3 to 4 to select the source for other inputs or outputs.
Press MENU to restore the normal TV picture.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control of Other Sony
Equipment
TV
VTR 1 23 MDP
¤
VIDEO
You can use the TV Remote Commander to control most of Sony
remote-controlled video equipment: beta, 8 mm and VHS VCRs
and video disc players.
0
(
P
)
r
u
p
+
REC
CH
+
˚
;
_
?
…/
Ú/;
Tuning the Remote Commander to the equipment
8
8
;
´ x
1
2
Set the VTR 1/2/3 MDP selector according to the equipment you
want to control:
´/´
a/Å
A
VTR1: Beta VCR
VTR2: 8 mm VCR
VTR3: VHS VCR
MDP: Video disc player
c
≥
MENU
Use the buttons indicated in the illustration to operate the
additional equipment.
¸
PROGR
If your video equipment is furnished with a COMMAND MODE
selector, set this selector to the same position as the VTR 1/2/3
MDP selector on the TV Remote Commander.
RM-862
If the equipment does not have a certain function, the
corresponding button on the Remote Commander will not operate.
When recording
When you use the a
(record) button, make
sure to press this button
and the one to the right
of it simultaneously.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
ForYour Information
OptimumViewing Area
For the best picture quality, try to position the projection TV so that you
can view the screen from within the areas shown below.
GB
Horizontal viewing area
35˚
35˚
1.5 m and more
Vertical viewing area
75˚
75˚
1.5 m and more
27
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Clean the dust with a vacuum cleaner.
Cleaning the Air Filter
Periodic cleaning of the air filter is necessary. Clean the air
filter once a month. When the filter becomes old and dust
remains on the filter even after cleaning, replace it with a new
one.
If you do not take the following precautions, you may get hurt or
household belongings may be damaged.
• Clean the air filter periodically. If you don’t clean it, it may
cause internal heat build-up.
vacuum cleaner
• Never use an air filter which is torn or has holes. Attach the
filter firmly with six tabs. If dust enters the TV, the picture
may become dark or it may cause fire.
5 Attach the filter.
Attach the six tabs securely.
1 Turn off the power and disconnect the
power cord.
2 Remove the front panel.
6 Attach the front panel.
Be careful not to damage the speaker.
Notes
• Attach the filter firmly. If it is not firmly attached, the power will not
turn on.
• Consult your nearest Sony service centre to obtain a new filter.
Remove the front panel without moving the TV.
Grasping the sides of the front panel with your fingers, pull
the panel forward. Be careful not to catch your fingernails.
3 Pull the filter upward and remove it.
Supplied filter
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Loosen the screw and pull out the lamp.
The lamp is still very hot just after the power is turned off.
Be careful not to touch the front glass or surrounding area
of the lamp or the glass of the lamp compartment.
Replacing the Lamp
When the lamp becomes dark or the picture colour is not
normal, replace the lamp with a new one.
If you do not take the following precautions, you may get hurt or
household belongings may be damaged.
GB
• Use the supplied new lamp for replacement. If you use
another lamp, it may cause damage to the TV.
• Do not remove the lamp except when replacing it. This may
cause heat damage or fire.
• Before replacing the lamp, turn off the power and disconnect
the power cord.
• Replace the lamp after it becomes cool. The front glass of
the lamp remains 100 °C (212 °F) and more even 30 minutes
after the power is turned off.
Loosen the screw with the supplied wrench.
• Do not place the removed lamp in proximity to children or
flammable material.
• Do not get the removed lamp wet, or insert objects inside the
lamp. It may cause the lamp to explode.
• Do not place near metal or easily flammable objects, as this
may cause fire. Also, do not put your hand inside the lamp
compartment, as you may be burned.
• Attach the new lamp firmly. If it is not firmly attached, the
picture may become dark or fire may result.
Pull out the lamp by the handle.
1 Turn off the power and disconnect the
power cord.
5 Attach the new lamp.
Replace the lamp 30 minutes or more after the power is
turned off.
Fasten the screw tightly.
Prepare the new lamp.
6 Attach the lamp cover.
Fasten the screw tightly.
2 Remove the front panel.
7 Attach the front panel.
Be careful not to damage the speaker.
When the
flashes
indicator on the front panel
The lamp is damaged, replace it with a new one.
Notes
• Do not touch or stain the front glass of the new lamp or the glass of
the lamp compartment. If the glass becomes dirty, the picture quality
may deteriorate or the lamp life may be shortened.
• Attach the lamp cover firmly. If it is not firmly attached, the power will
not turn on.
Remove the front panel without moving the TV.
• When the lamp burns out, a noise is audible. This does not represent
a damage.
• Consult your nearest Sony service centre to obtain a new lamp.
Grasping the side of the front panel with your fingers, pull
the panel forward. Be careful not to catch your fingernails.
3 Loosen the screw with the object such as a
coin and remove the lamp cover.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Here are some simple solutions to some problems which may affect the picture and sound.
Problem
Solution
No picture (screen is dark), no sound
• Plug in the TV in.
• Press uon the TV (if uindicator is on, press ;or a programme number
on the Remote Commander).
• Check the aerial connection.
• Check if the selected video source is on.
Poor or no picture (screen is dark), but sound is OK
• Press
to enter the PICTURE CONTROL menu and adjust the
brightness, contrast and colour.
Poor picture quality when watching an RGB video source
Good picture but no sound
• Press …repeatedly to select
.
• Press .+.
• Check loudspeakers connection.
• If ois displayed on the screen, press o.
• Press to enter the PICTURE CONTROL menu, select Reset, then
press the joystick to confirm.
• The batteries are weak.
No colour for colour programmes
Remote Commander does not function
If you continue to have problems, have your TV serviced by qualified personnel. Never open the casing yourself.
Specifications
This product complies with the EU Directive 89/336/EEC.
Television system
Colour system
B/G/H, D/K, I, L
PAL/SECAM
NTSC 3.58/4.43 (VIDEO IN)
See “Receivable channels and
channel displays” at the bottom.
Sound output
2 × 30 W (music power)
2 × 15 W (RMS)
50 W (RMS) (using as the centre
speaker)
Centre SP input
Channel coverage
Power consumption
155 W
Projected picture size 40 inches
Approx. 101.6 cm measured
Dimensions (W × H × D) 980 × 834 × 399 mm
(385/8 × 327/8 × 153/4 inches)
27 kg (59 lbs 8 oz)
diagonally
Mass
Supplied accessories
Other features
See page 6.
Digital comb filter (High resolution)
FASTEXT
Terminals
Rear
Center speaker input terminals,
2 terminals
DCI (Digital Constant Image)
(L, R), audio outputs - phono
jacks
Design and specifications are subject to change without notice.
1, 21-pin Euro connector
(CENELEC standard)
- inputs for audio and video signals
- inputs for RGB
- outputs of TV audio and video
signals
:2/q2, 21-pin Euro connector
- inputs for audio and video signals
- inputs for S video
- outputs for audio and video signals
(slectable)
:4/q4, 21-pin Euro connector
- inputs for audio and video signals
- inputs for S video
- outputs for audio and video signals
(monitor out)
q3, S video inputs - 4-pin DIN
…3, video inputs - phono jacks
≤ (L, R), audio inputs - phono jacks
2, headphones jack - stereo minijack
Receivable Channels and Channel Displays
Receivable
channels
Indication on the
screen
E2..12 21..69
C02 C03 C04..C12
C21..C69
B/G/H
S1..41
S01..S05 M1..M10
U1..U10
S01 S02..S41
S42..S46 S01..S10
S11..S20
CABLE TV (1)
CABLE TV (2)
A B C D E F G H H1 C11..C69
H2 21..69
ITALY
R01..R12 R21..R69 C02..C12 C21..C69
S01 S02..S41
D/K
CABLE TV (1)
CABLE TV (2)
CABLE TV
S42 S43..S46
B..Q, S21..41
S02, S03..S17,
S21..S41
Front
F2..F10 F21..F69
B21..B68
C01..C12 C21..C69
C21..C68
L
I
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Indicators
When a problem occurs, the indicator flashes as follows.
Attempt the solution recommended for the given problem.
GB
Indicator flashing patterns
Cause
The
indicator flashes.
The lamp does not light
(when the lamp is damaged)
The uindicator flashes twice.
Flashing continues in this manner.
The lamp does not light
(when the lamp is not
damaged)
The uindicator flashes three times.
Flashing continues in this manner.
The cover of the filter or the
lamp is removed.
The uindicator flashes four times.
The fan for cooling stops.
Flashing continues in this manner.
If the lamp flashes in a way not described above, consult your nearest Sony service centre.
Stabilizing the ProjectionTV
After setting up, secure the projection TV to a wall, etc., with the supplied brackets, for safety
purposes.
1 Mount the two supplied brackets with the screws to the upper rear side
of the projection TV.
Bracket (supplied)
2 Pass a strong cord or a chain through each bracket mounted in 1, and
then secure to a wall or a pillar, etc.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
|