4-674-610-11(1)
Router Unit PCWA-R1
Safety Information
Introduction
Front
(Opposite side view)
WARNING
The PCWA-AR300 is a Wireless Broadband Router that compiles with IEEE 802.11g standards as a wireless LAN
access point. It has the following features.
•
•
•
•
•
•
•
Opening the unit, for whatever reason, could lead to damage that is not covered by the warranty.
Do not touch the device or accessories during thunderstorms. Electrical shock could result.
This device is made for use in the USA and Canada only.
qa
0
Wireless Internet access from various locations in your home
Using this product as a base station, you can build a network environment from computers with wireless LAN PC
cards (installed or built in), and devices with Access Points installed. When this product is connected to a DSL or
cable modem, it provides wireless Internet access for computers on the LAN.
This device is made for indoor use only.
Do not use this equipment on hospital premises. Doing so may cause medical devices to malfunction.
Do not use this equipment in an aircraft. Doing so could cause the aircraft’s equipment to malfunction.
PO
WER
While using the Wireless Broadband Router, do not cover it or turn it on its side. Do not cover the Wireless
Broadband Router with objects such as magazines or newspapers or use it in confined, enclosed places, such as
the spaces between walls and furniture. Furthermore, do not turn the Wireless Broadband Router on its side while
using it. Either situation could cause heat to build up inside the Wireless Broadband Router, leading to
overheating and possible fire.
qh qg qf
Connect devices equipped with Ethernet connectors
The Router Unit has a LAN connector for Ethernet devices such as desktop computers, to provide Internet access.
The IP addresses of connected devices are automatically assigned by the Router Unit, so there is no need to set the
IP address of each device manually.
Wireless
qj
qd
qs
•
Exercise care when installing the Ethernet cable, Wireless Unit cable, AC adapter, and power cord. Personal
injury or damage to the Wireless Broadband Router could result from people tripping over these. Protect wiring
by installing it in places where people do not walk.
Broadband Router
Bottom
•
•
•
•
Do not swing the Router Unit, Wireless Unit, or AC adapter. Injury could result if they strike a person or fragile
material, such as glass.
Keep the Wireless Broadband Router out of the reach of children. Unforeseen injury could result from
swallowing loose parts, etc.
Read This First
Place the Wireless Broadband Router on a stable surface. Do not place the Wireless Broadband Router on
wobbly or tilted surfaces.
qk
The PCWA-AR300 consists of:
When hanging the units, make sure that the wall is strong enough to support the Wireless Unit and Router Unit.
They may fall if the wall is not strong enough, leading to unforeesen accidents. Further, be careful not to drop the
units or the tools used to install them. Doing so could result in unforeseen accidents.
0 STATUS indicator
Indicates the status of the Router Unit.
qf WAN connector
• Broadband Router Unit
PCWA-R1
Connects via an Ethernet cable to a communication
device such as a cable or DSL modem.
•
•
Avoid locations that are directly exposed to sunlight or heat. Internal overheating could result in fire or damage
to the unit.
• Wireless LAN Access Point PCWA-A320
•
•
•
•
Booting: Flashes white
During normal operation: Lights white
During firmware update: Flashes red
In this document, we refer to the Broadband Router Unit as the Router
Unit and to the Wireless LAN Access Point as the Wireless Unit.
z Hint
Make sure that the connectors are properly connected.
Use a straight-through or cross-over Ethernet
cable.
– Do not insert any metallic objects inside the connectors. Short-circuiting the pins could cause fire or damage to
the unit.
If firmware update fails:
Continues flashing red after firmware update
– Be careful to insert connectors squarely. Crooked insertion could cause pins to short-circuit, leading to fire or
damage.
DSL or cable
modem
qgReset switch
qa LINK/ACT indicators
Returns Router Unit settings to their factory
defaults.
•
•
Use only the supplied AC adapter with your Sony Wireless Broadband Router. To disconnect your Wireless
Broadband Router from the power supply, unplug the AC adapter.
Light when a link is established at the LAN
connectors qd or WAN connector qf, and flash
when sending and receiving data.
See “Resetting to factory default settings” overleaf
or Help for details.
ISDN and telephone lines cannot be connected to the WAN or LAN connectors of the Router Unit. If these
connectors are connected to the network or telephone lines mentioned below, high electric current to the
connectors may cause damage, overheating, or fire. Connecting to home or business-use telephone lines is
strictly prohibited.
qs Wireless Unit/LAN connectors
qhDC IN connector
Connect to the Access Point or to a device such as
a computer with an Ethernet connector.
– Telephone lines
Connects to the AC adapter.
– PBX (private branch exchange)
– Home or business-use telephone lines
– Lines other than those mentioned above
qjMAC address
Documentation
qd LAN connectors
The Router Unit’s WAN port MAC address is
printed here.
Connect via an Ethernet cable to a device such as a
computer with an Ethernet connector.
For customers in Canada
This product is supplied with the following manuals and help files:
•
•
This class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
qkWall mounting holes
z Hint
Use these holes to hang the Router Unit to a wall.
See “Hanging the units” overleaf for details.
❒ Quick Start Guide
Use a straight-through or cross-over Ethernet
cable.
•
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away
from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
Describes the required preparations and settings initially necessary to connect to the Internet.
PCWA-AR300
❒ Troubleshooting Guide
Provides solutions to common problems.
•
•
The term “IC” before the equipment certification number only signifies that Industry Canada technical
specifications were met.
Sony Corporation 2003 Printed in Japan
❒ Setup Page Online Help
The installer of this radio equipment must ensure that the antenna is located or pointed in such away that it does
not emit an RF field in excess of Health Canada limits for general population. Refer to Safety Code 6, which can
This is Help for the pages used to set up this product. Refer to it for details about setup page operations and
setting items of this product.
To display the setup page online Help
Display the setup page of the Router Unit or Access Point, and click
–
Consult the dealer or an experienced radio/TV
technician for help.
Pour les utilisateurs au Canada
or
.
•
•
Ces appareils numériques de la classe B sont conformes à la norme NMB-003 du Canada.
L’utilisation de ces appareils est autorisée seulement aux conditions suivantes : (1) ils ne doivent pas produire de
brouillage et (2) l’utilisateur des appareils doit être prêt à accepter tout brouillage radioélectrique reçu, même si
ce brouillage est susceptible de compromettre le fonctionnement des appareils.
Pour empêcher que ces appareils causent du brouillage au services faisant l’objet de licences, ils doivent être
utilisés à l’intérieur et devraient être placés loin des fenêtres afin de fournir un écran de blindage maximal. Si les
appareils (ou leurs antennes d’émission) sont installés à l’extérieur, ils doivent faire l’objet de licences.
Le terme « IC » devant le numéro d’homologuation signifie simplement que les normes d’Industrie Canada ont
été respectées.
L’installateur de ces appareils radio doit s’assurer que l’antenne soit située ou pointée de manière à ce qu’elle
n’émette pas de champs de radiofréquences électromagnétiques supérieurs aux limites spécifiées par Santé
Canada pour le grand public. Consultez le code de sécurité 6, disponible sur le site Web de Santé Canada à
Refer to Procedure 4 in the Quick Start Guide for details about how to display the setup page.
AC adapter
WARNING
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
If you have questions about this product, call the Sony
Customer Information Center at 1-877-760-7669;
or write to the Sony Customer Information Center at
12451 Gateway Boulevard, Fort Myers, FL 33913.
The number below is for FCC-related matters only.
This device must not be co-located or operating in
conjunction with any other antenna or transmitter.
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
•
Names of parts and functions
Owner’s Record
•
•
The model and serial numbers are located on the back
or bottom of the product. Record the serial number in
the space provided below. Refer to them whenever you
call your Sony dealer regarding this product.
Wireless Unit PCWA-A320
Declaration of Conformity
Trade Name: Sony
Model No: PCWA-R1
Responsible Party: Sony Electronics Inc.
Address: 680 Kinderkamack Road, Oradell,
NJ 07649 USA
ql w;
Front
Rear
(With rear cover removed)
Model No. PCWA-R1
Model No. PCWA-A320
ql Power switch
Serial No.____________ Serial No._____________
w; 100-240 V AC jack
Press to turn the device on (?) or off (a).
Connect the supplied power cord.
CAUTION
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
warranty.
This device contains the Transmitter Module
FCC ID: H8NWLL3020
Telephone: 201-930-6972
Getting help
This phone number is for FCC-related matters only.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
This section describes how to get help and support from Sony, as well as troubleshooting tips for your Wireless
Broadband Router.
Exposure to Radio Frequency Radiation
The radiated output power of the Wireless Broadband
Router is far below the FCC radio frequency exposure
limits.
Nevertheless, the Wireless Broadband Router shall be
used in such a manner that the potential for human
contact during normal operation is minimized.
About Sony’s Support Options
Sony provides several support options for your Wireless Broadband Router.
7
8 9
❒ Read This First (this manual) contains important information that you should read before using the Wireless
Broadband Router.
Declaration of Conformity
Trade Name: Sony
Model No: PCWA-A320
Responsible Party: Sony Electronics Inc.
Address: 680 Kinderkamack Road, Oradell,
NJ 07649 USA
FCC Radio-Frequency Exposure Statement
❒ Quick Start Guide explains how to install the Wireless Broadband Router.
This equipment complies with FCC radiation exposure
limits, set forth for an uncontrolled environment. This
equipment should be installed and operated with a
minimum distance of 20 cm (7.9 in.) between the
radiator and your body. This transmitter must not be
co-located or operated in conjunction with any other
antennas or transmitters.
❒ Troubleshooting Guide provides solutions to the most common problems users have with their Wireless
1STATUS indicator
5 Rear cover
Broadband Router.
Indicates the status of the Wireless Unit.
Remove this cover if you want to hang the
Wireless Unit to a wall and to verify the MAC
address and Network Name (SSID). See “Hanging
the units” overleaf for details about removing the
rear cover.
•
•
•
•
Booting: Quickly flashes white
Normal: Slowly flashes white
During firmware update: flashes red
❒ Online Help for the Wireless Broadband Router Setup Page explains how to configure the Wireless
Telephone: 201-930-6972
•
•
Sony, VAIO,
,
, and the Eco Info logo are trademarks of Sony Corporation.
Broadband Router.
This phone number is for FCC-related matters only.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other
countries.
❒ The Sony Wireless Broadband Router support Web site
If firmware update fails:
NOTE:
http://www.sony.com/wirelesslansupport provides the latest information on your Wireless Broadband
Router.
Continues flashing red after firmware update
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio or communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to television reception, which can
be determined by turning the equipment off and on,
you are encouraged to try to correct the interference
by one or more of the following measures:
6 Wall mounting holes
❒ The Sony e-mail support service answers your questions by electronic mail. Just send your question in an
e-mail message and a customer service representative will reply. To send a question to Sony e-mail support, fill
Use these holes to hang the Wireless Unit to a
wall. See “Hanging the units” overleaf for details.
2Reset switch
Returns Wireless Unit settings to their factory
defaults.
7 ID
❒ The Sony fax-back service provides you with answers to commonly asked questions. You can use this
automated service to request a list of available topics, and then select the topics you want to receive. To contact
the Sony fax-back service, call 1-877-760-7669.
See “Resetting to factory default settings” overleaf
or Help for details.
The shielded interface cable recommended in this
manual must be used with the equipment to comply
with the limits for a digital device pursuant to Subpart B
of Part 15 of the FCC Rules and Canadian ICES-003.
The six-character hexadecimal unique product ID
is printed here. This ID is used as the default
Network Name (SSID) of the Wireless Unit.
3LINK/ACT indicator
❒ The Sony Customer Information Services Center offers information about your Wireless Broadband
Router, Wireless LAN PC Card, and other Sony products that work with your computer. To contact the Sony
Customer Information Services Center, call 1-877-760-7669. Open 24 hours/day, 7 days/week.
Lights when the Wireless Unit cable is connected
to the Wireless Unit/LAN connectors qs on the
Router Unit and a link is established, and flashes
while sending and receiving.
Le câble d’interface blindé recommandé dans ce
document doit être utilisé avec les appareils pour être
conforme aux limitations des appareils numériques
telles que spécifiées dans la norme NMB-003 du
Canada.
8 MAC address
The Wireless Unit MAC Address is printed here.
9 Quick Setup switch
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Use this switch to set up the Wireless LAN
Converter PCWA-DE30. Refer to the Quick Start
Guide of the Wireless Converter or Help for
details.
NOTE:
4Wireless Unit cable
Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free
vegetable oil based ink.
The power outlet should be installed near the
equipment and should be easily accessible.
Connects to the Wireless Unit/LAN connectors qs
on the Router Unit.
–
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Continued on next page
Download from Www.Somanuals.com. All Manuals Search And Download.
|